mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-26 14:14:01 +08:00
ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board
Add minimal device tree source needed for DRA7 based SoCs. Also add a board dts file for the dra7-evm (based on dra752) which contains 1.5G of memory with 1G interleaved and 512MB non-interleaved. Also added in the board file are pin configuration details for i2c, mcspi and uart devices on board. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
This commit is contained in:
R Sricharan
Benoit Cousson
parent
06a9ea5d76
commit
6e58b8f1da
@ -189,7 +189,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
|
||||
am335x-boneblack.dtb \
|
||||
am3517-evm.dtb \
|
||||
am3517_mt_ventoux.dtb \
|
||||
am43x-epos-evm.dtb
|
||||
am43x-epos-evm.dtb \
|
||||
dra7-evm.dtb
|
||||
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
|
||||
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
|
||||
|
||||
140
arch/arm/boot/dts/dra7-evm.dts
Normal file
140
arch/arm/boot/dts/dra7-evm.dts
Normal file
@ -0,0 +1,140 @@
|
||||
/*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "dra7.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI DRA7";
|
||||
compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x60000000>; /* 1536 MB */
|
||||
};
|
||||
};
|
||||
|
||||
&dra7_pmx_core {
|
||||
i2c1_pins: pinmux_i2c1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
|
||||
0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c2_pins: pinmux_i2c2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
|
||||
0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c3_pins: pinmux_i2c3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
|
||||
0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
mcspi1_pins: pinmux_mcspi1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
|
||||
0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
|
||||
0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
|
||||
0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
|
||||
0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
|
||||
0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
|
||||
0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcspi2_pins: pinmux_mcspi2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
|
||||
0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
|
||||
0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
|
||||
0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
|
||||
>;
|
||||
};
|
||||
|
||||
uart1_pins: pinmux_uart1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
|
||||
0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
|
||||
0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
|
||||
0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
|
||||
>;
|
||||
};
|
||||
|
||||
uart2_pins: pinmux_uart2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
|
||||
0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
|
||||
0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
|
||||
0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
|
||||
>;
|
||||
};
|
||||
|
||||
uart3_pins: pinmux_uart3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
|
||||
0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
clock-frequency = <3400000>;
|
||||
};
|
||||
|
||||
&mcspi1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi1_pins>;
|
||||
};
|
||||
|
||||
&mcspi2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi2_pins>;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins>;
|
||||
};
|
||||
575
arch/arm/boot/dts/dra7.dtsi
Normal file
575
arch/arm/boot/dts/dra7.dtsi
Normal file
@ -0,0 +1,575 @@
|
||||
/*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
* Based on "omap4.dtsi"
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/pinctrl/dra.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
compatible = "ti,dra7xx";
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &uart1;
|
||||
serial1 = &uart2;
|
||||
serial2 = &uart3;
|
||||
serial3 = &uart4;
|
||||
serial4 = &uart5;
|
||||
serial5 = &uart6;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0>;
|
||||
};
|
||||
cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv7-timer";
|
||||
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
|
||||
gic: interrupt-controller@48211000 {
|
||||
compatible = "arm,cortex-a15-gic";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
reg = <0x48211000 0x1000>,
|
||||
<0x48212000 0x1000>,
|
||||
<0x48214000 0x2000>,
|
||||
<0x48216000 0x2000>;
|
||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
|
||||
/*
|
||||
* The soc node represents the soc top level view. It is uses for IPs
|
||||
* that are not memory mapped in the MPU view or for the MPU itself.
|
||||
*/
|
||||
soc {
|
||||
compatible = "ti,omap-infra";
|
||||
mpu {
|
||||
compatible = "ti,omap5-mpu";
|
||||
ti,hwmods = "mpu";
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* XXX: Use a flat representation of the SOC interconnect.
|
||||
* The real OMAP interconnect network is quite complex.
|
||||
* Since that will not bring real advantage to represent that in DT for
|
||||
* the moment, just use a fake OCP bus entry to represent the whole bus
|
||||
* hierarchy.
|
||||
*/
|
||||
ocp {
|
||||
compatible = "ti,omap4-l3-noc", "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
ti,hwmods = "l3_main_1", "l3_main_2";
|
||||
reg = <0x44000000 0x2000>,
|
||||
<0x44800000 0x3000>;
|
||||
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
counter32k: counter@4ae04000 {
|
||||
compatible = "ti,omap-counter32k";
|
||||
reg = <0x4ae04000 0x40>;
|
||||
ti,hwmods = "counter_32k";
|
||||
};
|
||||
|
||||
dra7_pmx_core: pinmux@4a003400 {
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x4a003400 0x0464>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-single,register-width = <32>;
|
||||
pinctrl-single,function-mask = <0x3fffffff>;
|
||||
};
|
||||
|
||||
sdma: dma-controller@4a056000 {
|
||||
compatible = "ti,omap4430-sdma";
|
||||
reg = <0x4a056000 0x1000>;
|
||||
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <32>;
|
||||
#dma-requests = <127>;
|
||||
};
|
||||
|
||||
gpio1: gpio@4ae10000 {
|
||||
compatible = "ti,omap4-gpio";
|
||||
reg = <0x4ae10000 0x200>;
|
||||
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "gpio1";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
gpio2: gpio@48055000 {
|
||||
compatible = "ti,omap4-gpio";
|
||||
reg = <0x48055000 0x200>;
|
||||
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "gpio2";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
gpio3: gpio@48057000 {
|
||||
compatible = "ti,omap4-gpio";
|
||||
reg = <0x48057000 0x200>;
|
||||
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "gpio3";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
gpio4: gpio@48059000 {
|
||||
compatible = "ti,omap4-gpio";
|
||||
reg = <0x48059000 0x200>;
|
||||
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "gpio4";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
gpio5: gpio@4805b000 {
|
||||
compatible = "ti,omap4-gpio";
|
||||
reg = <0x4805b000 0x200>;
|
||||
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "gpio5";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
gpio6: gpio@4805d000 {
|
||||
compatible = "ti,omap4-gpio";
|
||||
reg = <0x4805d000 0x200>;
|
||||
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "gpio6";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
gpio7: gpio@48051000 {
|
||||
compatible = "ti,omap4-gpio";
|
||||
reg = <0x48051000 0x200>;
|
||||
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "gpio7";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
gpio8: gpio@48053000 {
|
||||
compatible = "ti,omap4-gpio";
|
||||
reg = <0x48053000 0x200>;
|
||||
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "gpio8";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
uart1: serial@4806a000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x4806a000 0x100>;
|
||||
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "uart1";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart2: serial@4806c000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x4806c000 0x100>;
|
||||
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "uart2";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart3: serial@48020000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x48020000 0x100>;
|
||||
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "uart3";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart4: serial@4806e000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x4806e000 0x100>;
|
||||
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "uart4";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart5: serial@48066000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x48066000 0x100>;
|
||||
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "uart5";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart6: serial@48068000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x48068000 0x100>;
|
||||
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "uart6";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart7: serial@48420000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x48420000 0x100>;
|
||||
ti,hwmods = "uart7";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart8: serial@48422000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x48422000 0x100>;
|
||||
ti,hwmods = "uart8";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart9: serial@48424000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x48424000 0x100>;
|
||||
ti,hwmods = "uart9";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart10: serial@4ae2b000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x4ae2b000 0x100>;
|
||||
ti,hwmods = "uart10";
|
||||
clock-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer1: timer@4ae18000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x4ae18000 0x80>;
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer1";
|
||||
ti,timer-alwon;
|
||||
};
|
||||
|
||||
timer2: timer@48032000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x48032000 0x80>;
|
||||
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer2";
|
||||
};
|
||||
|
||||
timer3: timer@48034000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x48034000 0x80>;
|
||||
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer3";
|
||||
};
|
||||
|
||||
timer4: timer@48036000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x48036000 0x80>;
|
||||
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer4";
|
||||
};
|
||||
|
||||
timer5: timer@48820000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x48820000 0x80>;
|
||||
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer5";
|
||||
ti,timer-dsp;
|
||||
};
|
||||
|
||||
timer6: timer@48822000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x48822000 0x80>;
|
||||
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer6";
|
||||
ti,timer-dsp;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
timer7: timer@48824000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x48824000 0x80>;
|
||||
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer7";
|
||||
ti,timer-dsp;
|
||||
};
|
||||
|
||||
timer8: timer@48826000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x48826000 0x80>;
|
||||
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer8";
|
||||
ti,timer-dsp;
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
timer9: timer@4803e000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x4803e000 0x80>;
|
||||
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer9";
|
||||
};
|
||||
|
||||
timer10: timer@48086000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x48086000 0x80>;
|
||||
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer10";
|
||||
};
|
||||
|
||||
timer11: timer@48088000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x48088000 0x80>;
|
||||
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "timer11";
|
||||
ti,timer-pwm;
|
||||
};
|
||||
|
||||
timer13: timer@48828000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x48828000 0x80>;
|
||||
ti,hwmods = "timer13";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer14: timer@4882a000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x4882a000 0x80>;
|
||||
ti,hwmods = "timer14";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer15: timer@4882c000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x4882c000 0x80>;
|
||||
ti,hwmods = "timer15";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer16: timer@4882e000 {
|
||||
compatible = "ti,omap5430-timer";
|
||||
reg = <0x4882e000 0x80>;
|
||||
ti,hwmods = "timer16";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wdt2: wdt@4ae14000 {
|
||||
compatible = "ti,omap4-wdt";
|
||||
reg = <0x4ae14000 0x80>;
|
||||
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "wd_timer2";
|
||||
};
|
||||
|
||||
i2c1: i2c@48070000 {
|
||||
compatible = "ti,omap4-i2c";
|
||||
reg = <0x48070000 0x100>;
|
||||
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ti,hwmods = "i2c1";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c2: i2c@48072000 {
|
||||
compatible = "ti,omap4-i2c";
|
||||
reg = <0x48072000 0x100>;
|
||||
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ti,hwmods = "i2c2";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c3: i2c@48060000 {
|
||||
compatible = "ti,omap4-i2c";
|
||||
reg = <0x48060000 0x100>;
|
||||
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ti,hwmods = "i2c3";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c4: i2c@4807a000 {
|
||||
compatible = "ti,omap4-i2c";
|
||||
reg = <0x4807a000 0x100>;
|
||||
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ti,hwmods = "i2c4";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c5: i2c@4807c000 {
|
||||
compatible = "ti,omap4-i2c";
|
||||
reg = <0x4807c000 0x100>;
|
||||
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ti,hwmods = "i2c5";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mmc1: mmc@4809c000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
reg = <0x4809c000 0x400>;
|
||||
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "mmc1";
|
||||
ti,dual-volt;
|
||||
ti,needs-special-reset;
|
||||
dmas = <&sdma 61>, <&sdma 62>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mmc2: mmc@480b4000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
reg = <0x480b4000 0x400>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "mmc2";
|
||||
ti,needs-special-reset;
|
||||
dmas = <&sdma 47>, <&sdma 48>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mmc3: mmc@480ad000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
reg = <0x480ad000 0x400>;
|
||||
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "mmc3";
|
||||
ti,needs-special-reset;
|
||||
dmas = <&sdma 77>, <&sdma 78>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mmc4: mmc@480d1000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
reg = <0x480d1000 0x400>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "mmc4";
|
||||
ti,needs-special-reset;
|
||||
dmas = <&sdma 57>, <&sdma 58>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcspi1: spi@48098000 {
|
||||
compatible = "ti,omap4-mcspi";
|
||||
reg = <0x48098000 0x200>;
|
||||
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ti,hwmods = "mcspi1";
|
||||
ti,spi-num-cs = <4>;
|
||||
dmas = <&sdma 35>,
|
||||
<&sdma 36>,
|
||||
<&sdma 37>,
|
||||
<&sdma 38>,
|
||||
<&sdma 39>,
|
||||
<&sdma 40>,
|
||||
<&sdma 41>,
|
||||
<&sdma 42>;
|
||||
dma-names = "tx0", "rx0", "tx1", "rx1",
|
||||
"tx2", "rx2", "tx3", "rx3";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcspi2: spi@4809a000 {
|
||||
compatible = "ti,omap4-mcspi";
|
||||
reg = <0x4809a000 0x200>;
|
||||
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ti,hwmods = "mcspi2";
|
||||
ti,spi-num-cs = <2>;
|
||||
dmas = <&sdma 43>,
|
||||
<&sdma 44>,
|
||||
<&sdma 45>,
|
||||
<&sdma 46>;
|
||||
dma-names = "tx0", "rx0", "tx1", "rx1";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcspi3: spi@480b8000 {
|
||||
compatible = "ti,omap4-mcspi";
|
||||
reg = <0x480b8000 0x200>;
|
||||
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ti,hwmods = "mcspi3";
|
||||
ti,spi-num-cs = <2>;
|
||||
dmas = <&sdma 15>, <&sdma 16>;
|
||||
dma-names = "tx0", "rx0";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcspi4: spi@480ba000 {
|
||||
compatible = "ti,omap4-mcspi";
|
||||
reg = <0x480ba000 0x200>;
|
||||
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ti,hwmods = "mcspi4";
|
||||
ti,spi-num-cs = <1>;
|
||||
dmas = <&sdma 70>, <&sdma 71>;
|
||||
dma-names = "tx0", "rx0";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
50
include/dt-bindings/pinctrl/dra.h
Normal file
50
include/dt-bindings/pinctrl/dra.h
Normal file
@ -0,0 +1,50 @@
|
||||
/*
|
||||
* This header provides constants for DRA pinctrl bindings.
|
||||
*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
* Author: Rajendra Nayak <rnayak@ti.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_PINCTRL_DRA_H
|
||||
#define _DT_BINDINGS_PINCTRL_DRA_H
|
||||
|
||||
/* DRA7 mux mode options for each pin. See TRM for options */
|
||||
#define MUX_MODE0 0x0
|
||||
#define MUX_MODE1 0x1
|
||||
#define MUX_MODE2 0x2
|
||||
#define MUX_MODE3 0x3
|
||||
#define MUX_MODE4 0x4
|
||||
#define MUX_MODE5 0x5
|
||||
#define MUX_MODE6 0x6
|
||||
#define MUX_MODE7 0x7
|
||||
#define MUX_MODE8 0x8
|
||||
#define MUX_MODE9 0x9
|
||||
#define MUX_MODE10 0xa
|
||||
#define MUX_MODE11 0xb
|
||||
#define MUX_MODE12 0xc
|
||||
#define MUX_MODE13 0xd
|
||||
#define MUX_MODE14 0xe
|
||||
#define MUX_MODE15 0xf
|
||||
|
||||
#define PULL_ENA (1 << 16)
|
||||
#define PULL_UP (1 << 17)
|
||||
#define INPUT_EN (1 << 18)
|
||||
#define SLEWCONTROL (1 << 19)
|
||||
#define WAKEUP_EN (1 << 24)
|
||||
#define WAKEUP_EVENT (1 << 25)
|
||||
|
||||
/* Active pin states */
|
||||
#define PIN_OUTPUT 0
|
||||
#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP)
|
||||
#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA)
|
||||
#define PIN_INPUT INPUT_EN
|
||||
#define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL)
|
||||
#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
|
||||
#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)
|
||||
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user