mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-20 11:13:58 +08:00
powerpc/85xx: add board support for the TQM8548 modules
This patch adds support for the TQM8548 modules from TQ-Components GmbH (http://www.tqc.de). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Wolfgang Grandegger
Kumar Gala
parent
4fb035f69e
commit
6dd1b64a26
@ -255,6 +255,7 @@ image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \
|
||||
cuImage.mpc8572ds
|
||||
image-$(CONFIG_TQM8540) += cuImage.tqm8540
|
||||
image-$(CONFIG_TQM8541) += cuImage.tqm8541
|
||||
image-$(CONFIG_TQM8548) += cuImage.tqm8548
|
||||
image-$(CONFIG_TQM8555) += cuImage.tqm8555
|
||||
image-$(CONFIG_TQM8560) += cuImage.tqm8560
|
||||
image-$(CONFIG_SBC8548) += cuImage.sbc8548
|
||||
|
||||
365
arch/powerpc/boot/dts/tqm8548.dts
Normal file
365
arch/powerpc/boot/dts/tqm8548.dts
Normal file
@ -0,0 +1,365 @@
|
||||
/*
|
||||
* TQM8548 Device Tree Source
|
||||
*
|
||||
* Copyright 2006 Freescale Semiconductor Inc.
|
||||
* Copyright 2008 Wolfgang Grandegger <wg@denx.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
model = "tqc,tqm8548";
|
||||
compatible = "tqc,tqm8548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
ethernet3 = &enet3;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8548@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>; // 32 bytes
|
||||
i-cache-line-size = <32>; // 32 bytes
|
||||
d-cache-size = <0x8000>; // L1, 32K
|
||||
i-cache-size = <0x8000>; // L1, 32K
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x00000000>; // Filled in by U-Boot
|
||||
};
|
||||
|
||||
soc8548@e0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
ranges = <0x0 0xe0000000 0x100000>;
|
||||
reg = <0xe0000000 0x1000>; // CCSRBAR
|
||||
bus-frequency = <0>;
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,mpc8548-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <18 2>;
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,mpc8548-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2, 512K
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-mdio";
|
||||
reg = <0x24520 0x20>;
|
||||
|
||||
phy1: ethernet-phy@0 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <8 1>;
|
||||
reg = <1>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
phy2: ethernet-phy@1 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <8 1>;
|
||||
reg = <2>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
phy3: ethernet-phy@3 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <8 1>;
|
||||
reg = <3>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
phy4: ethernet-phy@4 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <8 1>;
|
||||
reg = <4>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
phy5: ethernet-phy@5 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <8 1>;
|
||||
reg = <5>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
cell-index = <0>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x24000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <29 2 30 2 34 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
phy-handle = <&phy2>;
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
cell-index = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x25000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <35 2 36 2 40 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
phy-handle = <&phy1>;
|
||||
};
|
||||
|
||||
enet2: ethernet@26000 {
|
||||
cell-index = <2>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x26000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <31 2 32 2 33 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
phy-handle = <&phy3>;
|
||||
};
|
||||
|
||||
enet3: ethernet@27000 {
|
||||
cell-index = <3>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x27000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <37 2 38 2 39 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
phy-handle = <&phy4>;
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>; // reg base, size
|
||||
clock-frequency = <0>; // should we fill in in uboot?
|
||||
current-speed = <115200>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>; // reg base, size
|
||||
clock-frequency = <0>; // should we fill in in uboot?
|
||||
current-speed = <115200>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 { // global utilities reg
|
||||
compatible = "fsl,mpc8548-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x40000 0x40000>;
|
||||
compatible = "chrp,open-pic";
|
||||
device_type = "open-pic";
|
||||
};
|
||||
};
|
||||
|
||||
localbus@e0005000 {
|
||||
compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
|
||||
"simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xe0005000 0x100>; // BRx, ORx, etc.
|
||||
|
||||
ranges = <
|
||||
0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1
|
||||
1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0
|
||||
2 0x0 0xe3000000 0x00008000 // CAN (2 x i82527)
|
||||
3 0x0 0xe3010000 0x00008000 // NAND FLASH
|
||||
|
||||
>;
|
||||
|
||||
flash@1,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <1 0x0 0x8000000>;
|
||||
bank-width = <4>;
|
||||
device-width = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "kernel";
|
||||
reg = <0x00000000 0x00200000>;
|
||||
};
|
||||
partition@200000 {
|
||||
label = "root";
|
||||
reg = <0x00200000 0x00300000>;
|
||||
};
|
||||
partition@500000 {
|
||||
label = "user";
|
||||
reg = <0x00500000 0x07a00000>;
|
||||
};
|
||||
partition@7f00000 {
|
||||
label = "env1";
|
||||
reg = <0x07f00000 0x00040000>;
|
||||
};
|
||||
partition@7f40000 {
|
||||
label = "env2";
|
||||
reg = <0x07f40000 0x00040000>;
|
||||
};
|
||||
partition@7f80000 {
|
||||
label = "u-boot";
|
||||
reg = <0x07f80000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
/* Note: CAN support needs be enabled in U-Boot */
|
||||
can0@2,0 {
|
||||
compatible = "intel,82527"; // Bosch CC770
|
||||
reg = <2 0x0 0x100>;
|
||||
interrupts = <4 0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
can1@2,100 {
|
||||
compatible = "intel,82527"; // Bosch CC770
|
||||
reg = <2 0x100 0x100>;
|
||||
interrupts = <4 0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
/* Note: NAND support needs to be enabled in U-Boot */
|
||||
upm@3,0 {
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,upm-nand";
|
||||
reg = <3 0x0 0x800>;
|
||||
fsl,upm-addr-offset = <0x10>;
|
||||
fsl,upm-cmd-offset = <0x08>;
|
||||
chip-delay = <25>; // in micro-seconds
|
||||
|
||||
nand@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "fs";
|
||||
reg = <0x00000000 0x01000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pci@e0008000 {
|
||||
cell-index = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
|
||||
device_type = "pci";
|
||||
reg = <0xe0008000 0x1000>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 28 */
|
||||
0xe000 0 0 1 &mpic 2 1
|
||||
0xe000 0 0 2 &mpic 3 1>;
|
||||
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <24 2>;
|
||||
bus-range = <0 0>;
|
||||
ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
|
||||
0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
|
||||
};
|
||||
|
||||
pci1: pcie@e000a000 {
|
||||
cell-index = <2>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 (PEX) */
|
||||
0x00000 0 0 1 &mpic 0 1
|
||||
0x00000 0 0 2 &mpic 1 1
|
||||
0x00000 0 0 3 &mpic 2 1
|
||||
0x00000 0 0 4 &mpic 3 1>;
|
||||
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <26 2>;
|
||||
bus-range = <0 0xff>;
|
||||
ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000
|
||||
0x01000000 0 0x00000000 0xef000000 0 0x08000000>;
|
||||
clock-frequency = <33333333>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0xe000a000 0x1000>;
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x02000000 0 0xc0000000 0x02000000 0
|
||||
0xc0000000 0 0x20000000
|
||||
0x01000000 0 0x00000000 0x01000000 0
|
||||
0x00000000 0 0x08000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -177,7 +177,7 @@ cuboot*)
|
||||
*-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
|
||||
platformo=$object/cuboot-85xx-cpm2.o
|
||||
;;
|
||||
*-mpc85*|*-tqm8540|*-sbc85*)
|
||||
*-mpc85*|*-tqm85*|*-sbc85*)
|
||||
platformo=$object/cuboot-85xx.o
|
||||
;;
|
||||
esac
|
||||
|
||||
1094
arch/powerpc/configs/85xx/tqm8548_defconfig
Normal file
1094
arch/powerpc/configs/85xx/tqm8548_defconfig
Normal file
File diff suppressed because it is too large
Load Diff
@ -74,6 +74,14 @@ config TQM8541
|
||||
select TQM85xx
|
||||
select CPM2
|
||||
|
||||
config TQM8548
|
||||
bool "TQ Components TQM8548"
|
||||
help
|
||||
This option enables support for the TQ Components TQM8548 board.
|
||||
select DEFAULT_UIMAGE
|
||||
select PPC_CPM_NEW_BINDING
|
||||
select TQM85xx
|
||||
|
||||
config TQM8555
|
||||
bool "TQ Components TQM8555"
|
||||
help
|
||||
|
||||
@ -120,8 +120,18 @@ static void __init tqm85xx_setup_arch(void)
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
|
||||
fsl_add_bridge(np, 1);
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
||||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
|
||||
struct resource rsrc;
|
||||
if (!of_address_to_resource(np, 0, &rsrc)) {
|
||||
if ((rsrc.start & 0xfffff) == 0x8000)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -167,6 +177,7 @@ static int __init tqm85xx_probe(void)
|
||||
|
||||
if ((of_flat_dt_is_compatible(root, "tqc,tqm8540")) ||
|
||||
(of_flat_dt_is_compatible(root, "tqc,tqm8541")) ||
|
||||
(of_flat_dt_is_compatible(root, "tqc,tqm8548")) ||
|
||||
(of_flat_dt_is_compatible(root, "tqc,tqm8555")) ||
|
||||
(of_flat_dt_is_compatible(root, "tqc,tqm8560")))
|
||||
return 1;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user