mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-30 16:13:54 +08:00
usb: dwc2: Add support for Lantiq ARX and XRX SoCs
Add support for Lantiq ARX and XRX SoC families to the dwc2 driver. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
This commit is contained in:
parent
2eafe93b92
commit
6c0c0951bb
@ -8,6 +8,8 @@ Required properties:
|
||||
- rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
|
||||
- "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
|
||||
- "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
|
||||
- "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
|
||||
- "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
|
||||
- snps,dwc2: A generic DWC2 USB controller with default parameters.
|
||||
- reg : Should contain 1 register range (address and length)
|
||||
- interrupts : Should contain 1 interrupt
|
||||
|
@ -149,6 +149,38 @@ static const struct dwc2_core_params params_rk3066 = {
|
||||
.hibernation = -1,
|
||||
};
|
||||
|
||||
static const struct dwc2_core_params params_ltq = {
|
||||
.otg_cap = 2, /* non-HNP/non-SRP */
|
||||
.otg_ver = -1,
|
||||
.dma_enable = -1,
|
||||
.dma_desc_enable = -1,
|
||||
.dma_desc_fs_enable = -1,
|
||||
.speed = -1,
|
||||
.enable_dynamic_fifo = -1,
|
||||
.en_multiple_tx_fifo = -1,
|
||||
.host_rx_fifo_size = 288, /* 288 DWORDs */
|
||||
.host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
|
||||
.host_perio_tx_fifo_size = 96, /* 96 DWORDs */
|
||||
.max_transfer_size = 65535,
|
||||
.max_packet_count = 511,
|
||||
.host_channels = -1,
|
||||
.phy_type = -1,
|
||||
.phy_utmi_width = -1,
|
||||
.phy_ulpi_ddr = -1,
|
||||
.phy_ulpi_ext_vbus = -1,
|
||||
.i2c_enable = -1,
|
||||
.ulpi_fs_ls = -1,
|
||||
.host_support_fs_ls_low_power = -1,
|
||||
.host_ls_low_power_phy_clk = -1,
|
||||
.ts_dline = -1,
|
||||
.reload_ctl = -1,
|
||||
.ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
|
||||
GAHBCFG_HBSTLEN_SHIFT,
|
||||
.uframe_sched = -1,
|
||||
.external_id_pin_ctl = -1,
|
||||
.hibernation = -1,
|
||||
};
|
||||
|
||||
/*
|
||||
* Check the dr_mode against the module configuration and hardware
|
||||
* capabilities.
|
||||
@ -428,6 +460,8 @@ static const struct of_device_id dwc2_of_match_table[] = {
|
||||
{ .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 },
|
||||
{ .compatible = "hisilicon,hi6220-usb", .data = ¶ms_hi6220 },
|
||||
{ .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 },
|
||||
{ .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq },
|
||||
{ .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq },
|
||||
{ .compatible = "snps,dwc2", .data = NULL },
|
||||
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
|
||||
{},
|
||||
|
Loading…
Reference in New Issue
Block a user