2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00

bnx2x: Fix port selection in case of E2

On E2 flavor, dual-port mode, the port argument used for some
functions is needed as the global port number rather than the port per
path.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Yaniv Rosner 2010-11-01 05:32:31 +00:00 committed by David S. Miller
parent 9bffeac1ea
commit 6a71bbe04c

View File

@ -5442,7 +5442,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
u8 port = params->port, initialize = 1;
u8 port, initialize = 1;
u16 val;
u16 temp;
u32 actual_phy_selection;
@ -5451,6 +5451,10 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
/* This is just for MDIO_CTL_REG_84823_MEDIA register. */
msleep(1);
if (CHIP_IS_E2(bp))
port = BP_PATH(bp);
else
port = params->port;
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
port);
@ -5627,7 +5631,11 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy,
struct link_params *params)
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
u8 port;
if (CHIP_IS_E2(bp))
port = BP_PATH(bp);
else
port = params->port;
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_OUTPUT_LOW,
port);
@ -7023,7 +7031,8 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp,
return -EINVAL;
}
/* disable attentions */
bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 +
port_of_path*4,
(NIG_MASK_XGXS0_LINK_STATUS |
NIG_MASK_XGXS0_LINK10G |
NIG_MASK_SERDES0_LINK_STATUS |