From 684151a75bf25f5aeb8a23010da91a34e17b7353 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Wed, 26 Jan 2011 06:36:35 +0000 Subject: [PATCH] sparc32: added U-Boot build target: uImage This is only for LEON as u-boot for SPARC only supports LEON. Signed-off-by: Daniel Hellstrom Acked-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 33 +++++++++++++++++++++++++++++++++ arch/sparc/Makefile | 3 ++- arch/sparc/boot/Makefile | 31 +++++++++++++++++++++++++++++++ 3 files changed, 66 insertions(+), 1 deletion(-) diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 13d2b6721da2..e48f471be547 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -461,6 +461,39 @@ config SPARC_LEON from www.gaisler.com. You can download a sparc-linux cross-compilation toolchain at www.gaisler.com. +if SPARC_LEON +menu "U-Boot options" + +config UBOOT_LOAD_ADDR + hex "uImage Load Address" + default 0x40004000 + ---help--- + U-Boot kernel load address, the address in physical address space + where u-boot will place the Linux kernel before booting it. + This address is normally the base address of main memory + 0x4000. + +config UBOOT_FLASH_ADDR + hex "uImage.o Load Address" + default 0x00080000 + ---help--- + Optional setting only affecting the uImage.o ELF-image used to + download the uImage file to the target using a ELF-loader other than + U-Boot. It may for example be used to download an uImage to FLASH with + the GRMON utility before even starting u-boot. + +config UBOOT_ENTRY_ADDR + hex "uImage Entry Address" + default 0xf0004000 + ---help--- + Do not change this unless you know what you're doing. This is + hardcoded by the SPARC32 and LEON port. + + This is the virtual address u-boot jumps to when booting the Linux + Kernel. + +endmenu +endif + endmenu menu "Bus options (PCI etc.)" diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile index 113225b241e0..ad1fb5d969f3 100644 --- a/arch/sparc/Makefile +++ b/arch/sparc/Makefile @@ -88,7 +88,7 @@ boot := arch/sparc/boot # Default target all: zImage -image zImage tftpboot.img vmlinux.aout: vmlinux +image zImage uImage tftpboot.img vmlinux.aout: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ archclean: @@ -102,6 +102,7 @@ ifeq ($(ARCH),sparc) define archhelp echo '* image - kernel image ($(boot)/image)' echo '* zImage - stripped kernel image ($(boot)/zImage)' + echo ' uImage - U-Boot SPARC32 Image (only for LEON)' echo ' tftpboot.img - image prepared for tftp' endef else diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile index a2c5898c1ab1..9205416b1e67 100644 --- a/arch/sparc/boot/Makefile +++ b/arch/sparc/boot/Makefile @@ -5,6 +5,7 @@ ROOT_IMG := /usr/src/root.img ELFTOAOUT := elftoaout +MKIMAGE := $(srctree)/scripts/mkuboot.sh hostprogs-y := piggyback btfixupprep targets := tftpboot.img btfix.o btfix.S image zImage vmlinux.aout @@ -77,6 +78,36 @@ $(obj)/zImage: $(obj)/image $(obj)/vmlinux.aout: vmlinux FORCE $(call if_changed,elftoaout) @echo ' kernel: $@ is ready' +else + +# The following lines make a readable image for U-Boot. +# uImage - Binary file read by U-boot +# uImage.o - object file of uImage for loading with a +# flash programmer understanding ELF. + +OBJCOPYFLAGS_image.bin := -S -O binary -R .note -R .comment +$(obj)/image.bin: $(obj)/image FORCE + $(call if_changed,objcopy) + +$(obj)/image.gz: $(obj)/image.bin + $(call if_changed,gzip) + +quiet_cmd_uimage = UIMAGE $@ + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sparc -O linux -T kernel \ + -C gzip -a $(CONFIG_UBOOT_LOAD_ADDR) \ + -e $(CONFIG_UBOOT_ENTRY_ADDR) -n 'Linux-$(KERNELRELEASE)' \ + -d $< $@ + +quiet_cmd_uimage.o = UIMAGE.O $@ + cmd_uimage.o = $(LD) -Tdata $(CONFIG_UBOOT_FLASH_ADDR) \ + -r -b binary $@ -o $@.o + +targets += uImage +$(obj)/uImage: $(obj)/image.gz + $(call if_changed,uimage) + $(call if_changed,uimage.o) + @echo ' Image $@ is ready' + endif $(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback System.map $(ROOT_IMG) FORCE