mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-19 02:34:01 +08:00
Fixes for omap variants for dra7 mmc voltage and boot issues
This series contains dra7 mmc voltage fixes, and fixes to the recent changes to probe devices with device tree data insteas of legacy platform data: - Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a reset, the bootrom will try to access the mmc card at 3.3V potentially damaging the card - Two regression fixes for am335x d_can. We must allow devices with no control registers for ti-sysc interconnect target module driver for at least d_can, and we remove the incorrect control registers for d_can. And we must configure the osc clock for d_can as otherwise register access may fail depending on the bootloader version - Four regression fixes for dra7 variant dts files to tag rtc and usb4 as disabled for dra71x and dra76x. These SoC variants do not have these devices, and got accidentally enabled when the L4 interconnect got defined in the dra7-l4.dtsi for the dra7 SoC family -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlzuLFwRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXM39Q/8CNz88ctxQupl8zqzAEq3Tr78Z9XdIlmR BEk3buRQmUZKd+v1M7k1aP97MFDaBjLM4qIEZRoT7WYuWSD04J6EzjCKOQrAMDMh cauv7X5ysNvyQNGUlEXxNIdFy5fB+jqfAqZ/R6dpiRAMXd7OtFMnBkyQR27WXyYM 2hIVpGwGZJDatTyqdZo2/QW4vEktD/4kzs+iaojMDmePjsIw+engwa+/D0TrnXfk dhW5Ay+irME2+gepBeFOXVBRZNiXgl7Y7fgynMpgbYMxwfsbJiYUh2UF/myP7mMt bnyIwhRUr2jg4W5+PpCzt1KXh4jirdcREBW5SLWQNcmZ2WA1KklgKSUXcwgUPbAP hdgxyMRKFJFGrpCH3U6U9UBXOprO9Niumw8zEna/fQoY5XfN4GrnbZomqdyTon+6 GzMivM1NnmMIUHd0EWrzxe2pbVLk2vNRH1x/dCvQ38HcnXaTH4gGWqbHZRxkUH7S ZkswHZQS32lOI7zK9EMlwfM5fa2QragnkH3e99CNH4ztr9cBs/p5ge2/ZRz0DOru vTEd1j69EMlvHyDjPtD3h+P4534hlEcclvHDrqINKQgWwn59zFy8LGgLL6YAT+n/ cT1VJkWKCN2IPM0VXrFSmWIyQmplgevA1tF1/XdaYSs5NdNJOYXxTQsmludgq1il pQ1EK2psBPU= =Ajjk -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omap variants for dra7 mmc voltage and boot issues This series contains dra7 mmc voltage fixes, and fixes to the recent changes to probe devices with device tree data insteas of legacy platform data: - Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a reset, the bootrom will try to access the mmc card at 3.3V potentially damaging the card - Two regression fixes for am335x d_can. We must allow devices with no control registers for ti-sysc interconnect target module driver for at least d_can, and we remove the incorrect control registers for d_can. And we must configure the osc clock for d_can as otherwise register access may fail depending on the bootloader version - Four regression fixes for dra7 variant dts files to tag rtc and usb4 as disabled for dra71x and dra76x. These SoC variants do not have these devices, and got accidentally enabled when the L4 interconnect got defined in the dra7-l4.dtsi for the dra7 SoC family * tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra71x: Disable usb4_tm target module ARM: dts: dra71x: Disable rtc target module ARM: dts: dra76x: Disable usb4_tm target module ARM: dts: dra76x: Disable rtc target module ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values ARM: dts: am57xx-idk: Remove support for voltage switching for SD card bus: ti-sysc: Handle devices with no control registers ARM: dts: Configure osc clock for d_can on am335x Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
commit
6515a2ceac
@ -1759,11 +1759,10 @@
|
||||
target-module@cc000 { /* 0x481cc000, ap 60 46.0 */
|
||||
compatible = "ti,sysc-omap4", "ti,sysc";
|
||||
ti,hwmods = "d_can0";
|
||||
reg = <0xcc000 0x4>;
|
||||
reg-names = "rev";
|
||||
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
||||
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
|
||||
<&dcan0_fck>;
|
||||
clock-names = "fck", "osc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0xcc000 0x2000>;
|
||||
@ -1782,11 +1781,10 @@
|
||||
target-module@d0000 { /* 0x481d0000, ap 62 42.0 */
|
||||
compatible = "ti,sysc-omap4", "ti,sysc";
|
||||
ti,hwmods = "d_can1";
|
||||
reg = <0xd0000 0x4>;
|
||||
reg-names = "rev";
|
||||
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
||||
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
|
||||
<&dcan1_fck>;
|
||||
clock-names = "fck", "osc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0xd0000 0x2000>;
|
||||
|
@ -1575,8 +1575,6 @@
|
||||
target-module@cc000 { /* 0x481cc000, ap 50 46.0 */
|
||||
compatible = "ti,sysc-omap4", "ti,sysc";
|
||||
ti,hwmods = "d_can0";
|
||||
reg = <0xcc000 0x4>;
|
||||
reg-names = "rev";
|
||||
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
||||
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
|
||||
clock-names = "fck";
|
||||
@ -1596,8 +1594,6 @@
|
||||
target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */
|
||||
compatible = "ti,sysc-omap4", "ti,sysc";
|
||||
ti,hwmods = "d_can1";
|
||||
reg = <0xd0000 0x4>;
|
||||
reg-names = "rev";
|
||||
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
||||
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
|
||||
clock-names = "fck";
|
||||
|
@ -420,6 +420,7 @@
|
||||
vqmmc-supply = <&ldo1_reg>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
|
||||
no-1-8-v;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
|
@ -3543,7 +3543,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
target-module@38000 { /* 0x48838000, ap 29 12.0 */
|
||||
rtctarget: target-module@38000 { /* 0x48838000, ap 29 12.0 */
|
||||
compatible = "ti,sysc-omap4-simple", "ti,sysc";
|
||||
ti,hwmods = "rtcss";
|
||||
reg = <0x38074 0x4>,
|
||||
|
@ -6,7 +6,7 @@
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "dra72-evm-common.dtsi"
|
||||
#include "dra71x.dtsi"
|
||||
#include "dra7-mmc-iodelay.dtsi"
|
||||
#include "dra72x-mmc-iodelay.dtsi"
|
||||
#include <dt-bindings/net/ti-dp83867.h>
|
||||
|
17
arch/arm/boot/dts/dra71x.dtsi
Normal file
17
arch/arm/boot/dts/dra71x.dtsi
Normal file
@ -0,0 +1,17 @@
|
||||
/*
|
||||
* Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "dra72-evm-common.dtsi"
|
||||
|
||||
&rtctarget {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb4_tm {
|
||||
status = "disabled";
|
||||
};
|
@ -22,7 +22,7 @@
|
||||
*
|
||||
* Datamanual Revisions:
|
||||
*
|
||||
* DRA76x Silicon Revision 1.0: SPRS993A, Revised July 2017
|
||||
* DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018
|
||||
*
|
||||
*/
|
||||
|
||||
@ -169,25 +169,25 @@
|
||||
/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
|
||||
mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf {
|
||||
pinctrl-pin-array = <
|
||||
0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
|
||||
0x194 A_DELAY_PS(0) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */
|
||||
0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
|
||||
0x1ac A_DELAY_PS(85) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
|
||||
0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
|
||||
0x1b8 A_DELAY_PS(139) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
|
||||
0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
|
||||
0x1c4 A_DELAY_PS(69) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
|
||||
0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */
|
||||
0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
|
||||
0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
|
||||
0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
|
||||
0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
|
||||
0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
|
||||
0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
|
||||
0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
|
||||
0x200 A_DELAY_PS(36) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
|
||||
0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
|
||||
0x368 A_DELAY_PS(72) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
|
||||
0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
|
||||
0x194 A_DELAY_PS(350) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */
|
||||
0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
|
||||
0x1ac A_DELAY_PS(335) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
|
||||
0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
|
||||
0x1b8 A_DELAY_PS(339) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
|
||||
0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
|
||||
0x1c4 A_DELAY_PS(219) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
|
||||
0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */
|
||||
0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
|
||||
0x1dc A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
|
||||
0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
|
||||
0x1e8 A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
|
||||
0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
|
||||
0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
|
||||
0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
|
||||
0x200 A_DELAY_PS(236) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
|
||||
0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
|
||||
0x368 A_DELAY_PS(372) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
|
||||
>;
|
||||
};
|
||||
|
||||
|
@ -81,3 +81,11 @@
|
||||
reg = <0x3fc>;
|
||||
};
|
||||
};
|
||||
|
||||
&rtctarget {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb4_tm {
|
||||
status = "disabled";
|
||||
};
|
||||
|
@ -660,12 +660,6 @@ static int sysc_check_registers(struct sysc *ddata)
|
||||
nr_regs++;
|
||||
}
|
||||
|
||||
if (nr_regs < 1) {
|
||||
dev_err(ddata->dev, "missing registers\n");
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (nr_matches > nr_regs) {
|
||||
dev_err(ddata->dev, "overlapping registers: (%i/%i)",
|
||||
nr_regs, nr_matches);
|
||||
@ -691,12 +685,18 @@ static int sysc_ioremap(struct sysc *ddata)
|
||||
{
|
||||
int size;
|
||||
|
||||
size = max3(ddata->offsets[SYSC_REVISION],
|
||||
ddata->offsets[SYSC_SYSCONFIG],
|
||||
ddata->offsets[SYSC_SYSSTATUS]);
|
||||
if (ddata->offsets[SYSC_REVISION] < 0 &&
|
||||
ddata->offsets[SYSC_SYSCONFIG] < 0 &&
|
||||
ddata->offsets[SYSC_SYSSTATUS] < 0) {
|
||||
size = ddata->module_size;
|
||||
} else {
|
||||
size = max3(ddata->offsets[SYSC_REVISION],
|
||||
ddata->offsets[SYSC_SYSCONFIG],
|
||||
ddata->offsets[SYSC_SYSSTATUS]);
|
||||
|
||||
if (size < 0 || (size + sizeof(u32)) > ddata->module_size)
|
||||
return -EINVAL;
|
||||
if ((size + sizeof(u32)) > ddata->module_size)
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ddata->module_va = devm_ioremap(ddata->dev,
|
||||
ddata->module_pa,
|
||||
@ -1128,7 +1128,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
|
||||
SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902,
|
||||
0xffff00f0, 0),
|
||||
SYSC_QUIRK("dcan", 0, 0, -1, -1, 0xffffffff, 0xffffffff, 0),
|
||||
SYSC_QUIRK("dcan", 0, 0, -1, -1, 0x00001401, 0xffffffff, 0),
|
||||
SYSC_QUIRK("dmic", 0, 0, 0x10, -1, 0x50010000, 0xffffffff, 0),
|
||||
SYSC_QUIRK("dwc3", 0, 0, 0x10, -1, 0x500a0200, 0xffffffff, 0),
|
||||
SYSC_QUIRK("epwmss", 0, 0, 0x4, -1, 0x47400001, 0xffffffff, 0),
|
||||
|
Loading…
Reference in New Issue
Block a user