2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00

can: Add support for Janz VMOD-ICAN3 Intelligent CAN module

The Janz VMOD-ICAN3 is a MODULbus daughterboard which fits onto any
MODULbus carrier board. It is an intelligent CAN controller with a
microcontroller and associated firmware.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Ira W. Snyder 2010-03-29 09:58:51 -07:00 committed by Samuel Ortiz
parent bd3581323c
commit 631eb22784
3 changed files with 1841 additions and 0 deletions

View File

@ -63,6 +63,16 @@ config CAN_BFIN
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called bfin_can. module will be called bfin_can.
config CAN_JANZ_ICAN3
tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
depends on CAN_DEV && MFD_JANZ_CMODIO
---help---
Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
connects to a MODULbus carrier board.
This driver can also be built as a module. If so, the module will be
called janz-ican3.ko.
source "drivers/net/can/mscan/Kconfig" source "drivers/net/can/mscan/Kconfig"
source "drivers/net/can/sja1000/Kconfig" source "drivers/net/can/sja1000/Kconfig"

View File

@ -15,5 +15,6 @@ obj-$(CONFIG_CAN_AT91) += at91_can.o
obj-$(CONFIG_CAN_TI_HECC) += ti_hecc.o obj-$(CONFIG_CAN_TI_HECC) += ti_hecc.o
obj-$(CONFIG_CAN_MCP251X) += mcp251x.o obj-$(CONFIG_CAN_MCP251X) += mcp251x.o
obj-$(CONFIG_CAN_BFIN) += bfin_can.o obj-$(CONFIG_CAN_BFIN) += bfin_can.o
obj-$(CONFIG_CAN_JANZ_ICAN3) += janz-ican3.o
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG

1830
drivers/net/can/janz-ican3.c Normal file

File diff suppressed because it is too large Load Diff