renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 13:13:57 +08:00
Code

bnx2x: Fix intermittent long KR2 link up time

Browse Source 
When a KR2 device is connected to a KR link-partner, sometimes it requires
disabling KR2 for the link to come up. To get a KR2 link up later, in case no
base pages are seen, the KR2 is restored. The problem was that some link
partners cleared their advertised BP/NP after around two seconds, causing the
driver to disable/enable KR2 link all the time.
The fix was to wait at least 5 seconds before checking KR2 recovery.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Yaniv Rosner 2013-03-07 13:27:33 +00:00 committed by David S. Miller
parent 87ab7f6f28
commit 5f3347e6e7
2 changed files with 13 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
View File

@ -12527,6 +12527,7 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->mac_type = MAC_TYPE_NONE;
vars->phy_flags = 0;
vars->check_kr2_recovery_cnt = 0;
/* Driver opens NIG-BRB filters */
bnx2x_set_rx_filter(params, 1);
/* Check if link flap can be avoided */
@ -13411,6 +13412,7 @@ static void bnx2x_disable_kr2(struct link_params *params,
vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE;
bnx2x_update_link_attr(params, vars->link_attr_sync);
vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT;
/* Restart AN on leading lane */
bnx2x_warpcore_restart_AN_KR(phy, params);
}
@ -13439,6 +13441,15 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
return;
}
/* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery
* since some switches tend to reinit the AN process and clear the
* advertised BP/NP after ~2 seconds causing the KR2 to be disabled
* and recovered many times
*/
if (vars->check_kr2_recovery_cnt > 0) {
vars->check_kr2_recovery_cnt--;
return;
}
lane = bnx2x_get_warpcore_lane(phy, params);
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, lane);

3
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
View File

@ -342,7 +342,8 @@ struct link_vars {
u32 link_status;
u32 eee_status;
u8 fault_detected;
u8 rsrv1;
u8 check_kr2_recovery_cnt;
#define CHECK_KR2_RECOVERY_CNT 5
u16 periodic_flags;
#define PERIODIC_FLAGS_LINK_EVENT 0x0001