2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00

ARM: S5PC1xx: add platform helpers for i2c adapter devices

Samsung S5PC100 has I2C bus controller compatible with the one known from
previous SoCs series. Add required platform setup and support code that
it can be used with s3c2410-i2c driver.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Kyungmin Park 2009-11-17 08:41:21 +01:00 committed by Ben Dooks
parent 079b032417
commit 5eda288fa9
5 changed files with 20 additions and 6 deletions

View File

@ -75,6 +75,10 @@ void __init s5pc100_map_io(void)
iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
/* initialise device information early */
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
}
void __init s5pc100_init_clocks(int xtal)

View File

@ -42,7 +42,7 @@ config S5PC1XX_SETUP_FB_24BPP
help
Common setup code for S5PC1XX with an 24bpp RGB display helper.
config S5PC100_SETUP_I2C0
config S5PC1XX_SETUP_I2C0
bool
default y
help
@ -51,7 +51,7 @@ config S5PC100_SETUP_I2C0
Note, currently since i2c0 is always compiled, this setup helper
is always compiled with it.
config S5PC100_SETUP_I2C1
config S5PC1XX_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.

View File

@ -26,5 +26,5 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o

View File

@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
/* Pin configuration would be needed */
s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
}

View File

@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
/* Pin configuration would be needed */
s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
}