From 5da43c1a78cbc16518017dfb058da6ec4829781b Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Thu, 2 Jul 2009 12:50:52 +0000 Subject: [PATCH] ixgbe: fix inconsistent SFP/SFP+ failure results. Currently if we loaded the driver, insert an unsupported module, and then attempt to "ifconfig up" the device it will be brought down but the netdev would not be unregistered. This behavior is different than all other code paths. This patch corrects that by down'ing the device and then scheduling the sfp_config_module_task tasklet. The tasklet will detect this condition (like it does with other code paths) and do the unregister_netdev(). I also removed the log message as this condition (an unsupported SFP+ module) will be logged in sfp_config_module_task. Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index cf39f5a47037..a3061aacffd8 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2706,12 +2706,12 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) if (hw->phy.type == ixgbe_phy_unknown) { err = hw->phy.ops.identify(hw); if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - dev_err(&adapter->pdev->dev, "failed to initialize " - "because an unsupported SFP+ module type " - "was detected.\n" - "Reload the driver after installing a " - "supported module.\n"); + /* + * Take the device down and schedule the sfp tasklet + * which will unregister_netdev and log it. + */ ixgbe_down(adapter); + schedule_work(&adapter->sfp_config_module_task); return err; } }