mirror of
https://github.com/edk2-porting/linux-next.git
synced 2025-01-02 02:34:05 +08:00
dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml
This moves the bindings over, based a lot on toshiba,tc358768.yaml. Unless there's someone known to be better, I've set the maintainer in the yaml as the first person to submit bindings. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.4.Ifcdc4ecb12742a27862744ee1e8753cb95a38a7f@changeid
This commit is contained in:
Douglas Anderson
Sam Ravnborg
parent
27ed2b3f22
commit
5a2e9b658c
@ -1,87 +0,0 @@
|
|||||||
SN65DSI86 DSI to eDP bridge chip
|
|
||||||
--------------------------------
|
|
||||||
|
|
||||||
This is the binding for Texas Instruments SN65DSI86 bridge.
|
|
||||||
http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
|
|
||||||
|
|
||||||
Required properties:
|
|
||||||
- compatible: Must be "ti,sn65dsi86"
|
|
||||||
- reg: i2c address of the chip, 0x2d as per datasheet
|
|
||||||
- enable-gpios: gpio specification for bridge_en pin (active high)
|
|
||||||
|
|
||||||
- vccio-supply: A 1.8V supply that powers up the digital IOs.
|
|
||||||
- vpll-supply: A 1.8V supply that powers up the displayport PLL.
|
|
||||||
- vcca-supply: A 1.2V supply that powers up the analog circuits.
|
|
||||||
- vcc-supply: A 1.2V supply that powers up the digital core.
|
|
||||||
|
|
||||||
Optional properties:
|
|
||||||
- interrupts-extended: Specifier for the SN65DSI86 interrupt line.
|
|
||||||
|
|
||||||
- gpio-controller: Marks the device has a GPIO controller.
|
|
||||||
- #gpio-cells : Should be two. The first cell is the pin number and
|
|
||||||
the second cell is used to specify flags.
|
|
||||||
See ../../gpio/gpio.txt for more information.
|
|
||||||
- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of
|
|
||||||
the cell formats.
|
|
||||||
|
|
||||||
- clock-names: should be "refclk"
|
|
||||||
- clocks: Specification for input reference clock. The reference
|
|
||||||
clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
|
|
||||||
|
|
||||||
- data-lanes: See ../../media/video-interface.txt
|
|
||||||
- lane-polarities: See ../../media/video-interface.txt
|
|
||||||
|
|
||||||
- suspend-gpios: specification for GPIO1 pin on bridge (active low)
|
|
||||||
|
|
||||||
Required nodes:
|
|
||||||
This device has two video ports. Their connections are modelled using the
|
|
||||||
OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
|
|
||||||
|
|
||||||
- Video port 0 for DSI input
|
|
||||||
- Video port 1 for eDP output
|
|
||||||
|
|
||||||
Example
|
|
||||||
-------
|
|
||||||
|
|
||||||
edp-bridge@2d {
|
|
||||||
compatible = "ti,sn65dsi86";
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
reg = <0x2d>;
|
|
||||||
|
|
||||||
enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
|
|
||||||
suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
|
|
||||||
|
|
||||||
interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
|
|
||||||
|
|
||||||
vccio-supply = <&pm8916_l17>;
|
|
||||||
vcca-supply = <&pm8916_l6>;
|
|
||||||
vpll-supply = <&pm8916_l17>;
|
|
||||||
vcc-supply = <&pm8916_l6>;
|
|
||||||
|
|
||||||
clock-names = "refclk";
|
|
||||||
clocks = <&input_refclk>;
|
|
||||||
|
|
||||||
ports {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
|
|
||||||
port@0 {
|
|
||||||
reg = <0>;
|
|
||||||
|
|
||||||
edp_bridge_in: endpoint {
|
|
||||||
remote-endpoint = <&dsi_out>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
port@1 {
|
|
||||||
reg = <1>;
|
|
||||||
|
|
||||||
edp_bridge_out: endpoint {
|
|
||||||
data-lanes = <2 1 3 0>;
|
|
||||||
lane-polarities = <0 1 0 1>;
|
|
||||||
remote-endpoint = <&edp_panel_in>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
}
|
|
||||||
@ -0,0 +1,285 @@
|
|||||||
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||||
|
%YAML 1.2
|
||||||
|
---
|
||||||
|
$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
|
||||||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
|
||||||
|
title: SN65DSI86 DSI to eDP bridge chip
|
||||||
|
|
||||||
|
maintainers:
|
||||||
|
- Sandeep Panda <spanda@codeaurora.org>
|
||||||
|
|
||||||
|
description: |
|
||||||
|
The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
|
||||||
|
http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
|
||||||
|
|
||||||
|
properties:
|
||||||
|
compatible:
|
||||||
|
const: ti,sn65dsi86
|
||||||
|
|
||||||
|
reg:
|
||||||
|
const: 0x2d
|
||||||
|
|
||||||
|
enable-gpios:
|
||||||
|
maxItems: 1
|
||||||
|
description: GPIO specifier for bridge_en pin (active high).
|
||||||
|
|
||||||
|
suspend-gpios:
|
||||||
|
maxItems: 1
|
||||||
|
description: GPIO specifier for GPIO1 pin on bridge (active low).
|
||||||
|
|
||||||
|
vccio-supply:
|
||||||
|
description: A 1.8V supply that powers the digital IOs.
|
||||||
|
|
||||||
|
vpll-supply:
|
||||||
|
description: A 1.8V supply that powers the DisplayPort PLL.
|
||||||
|
|
||||||
|
vcca-supply:
|
||||||
|
description: A 1.2V supply that powers the analog circuits.
|
||||||
|
|
||||||
|
vcc-supply:
|
||||||
|
description: A 1.2V supply that powers the digital core.
|
||||||
|
|
||||||
|
interrupts:
|
||||||
|
maxItems: 1
|
||||||
|
|
||||||
|
clocks:
|
||||||
|
maxItems: 1
|
||||||
|
description:
|
||||||
|
Clock specifier for input reference clock. The reference clock rate must
|
||||||
|
be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
|
||||||
|
|
||||||
|
clock-names:
|
||||||
|
const: refclk
|
||||||
|
|
||||||
|
gpio-controller: true
|
||||||
|
'#gpio-cells':
|
||||||
|
const: 2
|
||||||
|
description:
|
||||||
|
First cell is pin number, second cell is flags. GPIO pin numbers are
|
||||||
|
1-based to match the datasheet. See ../../gpio/gpio.txt for more
|
||||||
|
information.
|
||||||
|
|
||||||
|
'#pwm-cells':
|
||||||
|
const: 1
|
||||||
|
description: See ../../pwm/pwm.yaml for description of the cell formats.
|
||||||
|
|
||||||
|
ports:
|
||||||
|
type: object
|
||||||
|
additionalProperties: false
|
||||||
|
|
||||||
|
properties:
|
||||||
|
"#address-cells":
|
||||||
|
const: 1
|
||||||
|
|
||||||
|
"#size-cells":
|
||||||
|
const: 0
|
||||||
|
|
||||||
|
port@0:
|
||||||
|
type: object
|
||||||
|
additionalProperties: false
|
||||||
|
|
||||||
|
description:
|
||||||
|
Video port for MIPI DSI input
|
||||||
|
|
||||||
|
properties:
|
||||||
|
reg:
|
||||||
|
const: 0
|
||||||
|
|
||||||
|
endpoint:
|
||||||
|
type: object
|
||||||
|
additionalProperties: false
|
||||||
|
properties:
|
||||||
|
remote-endpoint: true
|
||||||
|
|
||||||
|
required:
|
||||||
|
- reg
|
||||||
|
|
||||||
|
port@1:
|
||||||
|
type: object
|
||||||
|
additionalProperties: false
|
||||||
|
|
||||||
|
description:
|
||||||
|
Video port for eDP output (panel or connector).
|
||||||
|
|
||||||
|
properties:
|
||||||
|
reg:
|
||||||
|
const: 1
|
||||||
|
|
||||||
|
endpoint:
|
||||||
|
type: object
|
||||||
|
additionalProperties: false
|
||||||
|
|
||||||
|
properties:
|
||||||
|
remote-endpoint: true
|
||||||
|
|
||||||
|
data-lanes:
|
||||||
|
oneOf:
|
||||||
|
- minItems: 1
|
||||||
|
maxItems: 1
|
||||||
|
uniqueItems: true
|
||||||
|
items:
|
||||||
|
enum:
|
||||||
|
- 0
|
||||||
|
- 1
|
||||||
|
description:
|
||||||
|
If you have 1 logical lane the bridge supports routing
|
||||||
|
to either port 0 or port 1. Port 0 is suggested.
|
||||||
|
See ../../media/video-interface.txt for details.
|
||||||
|
|
||||||
|
- minItems: 2
|
||||||
|
maxItems: 2
|
||||||
|
uniqueItems: true
|
||||||
|
items:
|
||||||
|
enum:
|
||||||
|
- 0
|
||||||
|
- 1
|
||||||
|
description:
|
||||||
|
If you have 2 logical lanes the bridge supports
|
||||||
|
reordering but only on physical ports 0 and 1.
|
||||||
|
See ../../media/video-interface.txt for details.
|
||||||
|
|
||||||
|
- minItems: 4
|
||||||
|
maxItems: 4
|
||||||
|
uniqueItems: true
|
||||||
|
items:
|
||||||
|
enum:
|
||||||
|
- 0
|
||||||
|
- 1
|
||||||
|
- 2
|
||||||
|
- 3
|
||||||
|
description:
|
||||||
|
If you have 4 logical lanes the bridge supports
|
||||||
|
reordering in any way.
|
||||||
|
See ../../media/video-interface.txt for details.
|
||||||
|
|
||||||
|
lane-polarities:
|
||||||
|
minItems: 1
|
||||||
|
maxItems: 4
|
||||||
|
items:
|
||||||
|
enum:
|
||||||
|
- 0
|
||||||
|
- 1
|
||||||
|
description: See ../../media/video-interface.txt
|
||||||
|
|
||||||
|
dependencies:
|
||||||
|
lane-polarities: [data-lanes]
|
||||||
|
|
||||||
|
required:
|
||||||
|
- reg
|
||||||
|
|
||||||
|
required:
|
||||||
|
- "#address-cells"
|
||||||
|
- "#size-cells"
|
||||||
|
- port@0
|
||||||
|
- port@1
|
||||||
|
|
||||||
|
required:
|
||||||
|
- compatible
|
||||||
|
- reg
|
||||||
|
- enable-gpios
|
||||||
|
- vccio-supply
|
||||||
|
- vpll-supply
|
||||||
|
- vcca-supply
|
||||||
|
- vcc-supply
|
||||||
|
- ports
|
||||||
|
|
||||||
|
additionalProperties: false
|
||||||
|
|
||||||
|
examples:
|
||||||
|
- |
|
||||||
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||||||
|
|
||||||
|
i2c {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
bridge@2d {
|
||||||
|
compatible = "ti,sn65dsi86";
|
||||||
|
reg = <0x2d>;
|
||||||
|
|
||||||
|
interrupt-parent = <&tlmm>;
|
||||||
|
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
|
||||||
|
enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
|
||||||
|
|
||||||
|
vpll-supply = <&src_pp1800_s4a>;
|
||||||
|
vccio-supply = <&src_pp1800_s4a>;
|
||||||
|
vcca-supply = <&src_pp1200_l2a>;
|
||||||
|
vcc-supply = <&src_pp1200_l2a>;
|
||||||
|
|
||||||
|
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
|
||||||
|
clock-names = "refclk";
|
||||||
|
|
||||||
|
ports {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
port@0 {
|
||||||
|
reg = <0>;
|
||||||
|
endpoint {
|
||||||
|
remote-endpoint = <&dsi0_out>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
port@1 {
|
||||||
|
reg = <1>;
|
||||||
|
endpoint {
|
||||||
|
remote-endpoint = <&panel_in_edp>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
- |
|
||||||
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||||||
|
|
||||||
|
i2c {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
bridge@2d {
|
||||||
|
compatible = "ti,sn65dsi86";
|
||||||
|
reg = <0x2d>;
|
||||||
|
|
||||||
|
enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
|
||||||
|
suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
|
||||||
|
|
||||||
|
interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
|
||||||
|
|
||||||
|
vccio-supply = <&pm8916_l17>;
|
||||||
|
vcca-supply = <&pm8916_l6>;
|
||||||
|
vpll-supply = <&pm8916_l17>;
|
||||||
|
vcc-supply = <&pm8916_l6>;
|
||||||
|
|
||||||
|
clock-names = "refclk";
|
||||||
|
clocks = <&input_refclk>;
|
||||||
|
|
||||||
|
ports {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
port@0 {
|
||||||
|
reg = <0>;
|
||||||
|
|
||||||
|
edp_bridge_in: endpoint {
|
||||||
|
remote-endpoint = <&dsi_out>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
port@1 {
|
||||||
|
reg = <1>;
|
||||||
|
|
||||||
|
edp_bridge_out: endpoint {
|
||||||
|
data-lanes = <2 1 3 0>;
|
||||||
|
lane-polarities = <0 1 0 1>;
|
||||||
|
remote-endpoint = <&edp_panel_in>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
Loading…
Reference in New Issue
Block a user