mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 07:34:06 +08:00
dt-bindings: drm/bridge: ti-sn65dsi86: Convert to yaml
This moves the bindings over, based a lot on toshiba,tc358768.yaml. Unless there's someone known to be better, I've set the maintainer in the yaml as the first person to submit bindings. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.4.Ifcdc4ecb12742a27862744ee1e8753cb95a38a7f@changeid
This commit is contained in:
Douglas Anderson
Sam Ravnborg
parent
27ed2b3f22
commit
5a2e9b658c
@ -1,87 +0,0 @@
|
||||
SN65DSI86 DSI to eDP bridge chip
|
||||
--------------------------------
|
||||
|
||||
This is the binding for Texas Instruments SN65DSI86 bridge.
|
||||
http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be "ti,sn65dsi86"
|
||||
- reg: i2c address of the chip, 0x2d as per datasheet
|
||||
- enable-gpios: gpio specification for bridge_en pin (active high)
|
||||
|
||||
- vccio-supply: A 1.8V supply that powers up the digital IOs.
|
||||
- vpll-supply: A 1.8V supply that powers up the displayport PLL.
|
||||
- vcca-supply: A 1.2V supply that powers up the analog circuits.
|
||||
- vcc-supply: A 1.2V supply that powers up the digital core.
|
||||
|
||||
Optional properties:
|
||||
- interrupts-extended: Specifier for the SN65DSI86 interrupt line.
|
||||
|
||||
- gpio-controller: Marks the device has a GPIO controller.
|
||||
- #gpio-cells : Should be two. The first cell is the pin number and
|
||||
the second cell is used to specify flags.
|
||||
See ../../gpio/gpio.txt for more information.
|
||||
- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of
|
||||
the cell formats.
|
||||
|
||||
- clock-names: should be "refclk"
|
||||
- clocks: Specification for input reference clock. The reference
|
||||
clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
|
||||
|
||||
- data-lanes: See ../../media/video-interface.txt
|
||||
- lane-polarities: See ../../media/video-interface.txt
|
||||
|
||||
- suspend-gpios: specification for GPIO1 pin on bridge (active low)
|
||||
|
||||
Required nodes:
|
||||
This device has two video ports. Their connections are modelled using the
|
||||
OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
|
||||
|
||||
- Video port 0 for DSI input
|
||||
- Video port 1 for eDP output
|
||||
|
||||
Example
|
||||
-------
|
||||
|
||||
edp-bridge@2d {
|
||||
compatible = "ti,sn65dsi86";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x2d>;
|
||||
|
||||
enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
|
||||
suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
vccio-supply = <&pm8916_l17>;
|
||||
vcca-supply = <&pm8916_l6>;
|
||||
vpll-supply = <&pm8916_l17>;
|
||||
vcc-supply = <&pm8916_l6>;
|
||||
|
||||
clock-names = "refclk";
|
||||
clocks = <&input_refclk>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
edp_bridge_in: endpoint {
|
||||
remote-endpoint = <&dsi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
edp_bridge_out: endpoint {
|
||||
data-lanes = <2 1 3 0>;
|
||||
lane-polarities = <0 1 0 1>;
|
||||
remote-endpoint = <&edp_panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
}
|
||||
@ -0,0 +1,285 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: SN65DSI86 DSI to eDP bridge chip
|
||||
|
||||
maintainers:
|
||||
- Sandeep Panda <spanda@codeaurora.org>
|
||||
|
||||
description: |
|
||||
The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
|
||||
http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: ti,sn65dsi86
|
||||
|
||||
reg:
|
||||
const: 0x2d
|
||||
|
||||
enable-gpios:
|
||||
maxItems: 1
|
||||
description: GPIO specifier for bridge_en pin (active high).
|
||||
|
||||
suspend-gpios:
|
||||
maxItems: 1
|
||||
description: GPIO specifier for GPIO1 pin on bridge (active low).
|
||||
|
||||
vccio-supply:
|
||||
description: A 1.8V supply that powers the digital IOs.
|
||||
|
||||
vpll-supply:
|
||||
description: A 1.8V supply that powers the DisplayPort PLL.
|
||||
|
||||
vcca-supply:
|
||||
description: A 1.2V supply that powers the analog circuits.
|
||||
|
||||
vcc-supply:
|
||||
description: A 1.2V supply that powers the digital core.
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
description:
|
||||
Clock specifier for input reference clock. The reference clock rate must
|
||||
be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
|
||||
|
||||
clock-names:
|
||||
const: refclk
|
||||
|
||||
gpio-controller: true
|
||||
'#gpio-cells':
|
||||
const: 2
|
||||
description:
|
||||
First cell is pin number, second cell is flags. GPIO pin numbers are
|
||||
1-based to match the datasheet. See ../../gpio/gpio.txt for more
|
||||
information.
|
||||
|
||||
'#pwm-cells':
|
||||
const: 1
|
||||
description: See ../../pwm/pwm.yaml for description of the cell formats.
|
||||
|
||||
ports:
|
||||
type: object
|
||||
additionalProperties: false
|
||||
|
||||
properties:
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
port@0:
|
||||
type: object
|
||||
additionalProperties: false
|
||||
|
||||
description:
|
||||
Video port for MIPI DSI input
|
||||
|
||||
properties:
|
||||
reg:
|
||||
const: 0
|
||||
|
||||
endpoint:
|
||||
type: object
|
||||
additionalProperties: false
|
||||
properties:
|
||||
remote-endpoint: true
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
||||
port@1:
|
||||
type: object
|
||||
additionalProperties: false
|
||||
|
||||
description:
|
||||
Video port for eDP output (panel or connector).
|
||||
|
||||
properties:
|
||||
reg:
|
||||
const: 1
|
||||
|
||||
endpoint:
|
||||
type: object
|
||||
additionalProperties: false
|
||||
|
||||
properties:
|
||||
remote-endpoint: true
|
||||
|
||||
data-lanes:
|
||||
oneOf:
|
||||
- minItems: 1
|
||||
maxItems: 1
|
||||
uniqueItems: true
|
||||
items:
|
||||
enum:
|
||||
- 0
|
||||
- 1
|
||||
description:
|
||||
If you have 1 logical lane the bridge supports routing
|
||||
to either port 0 or port 1. Port 0 is suggested.
|
||||
See ../../media/video-interface.txt for details.
|
||||
|
||||
- minItems: 2
|
||||
maxItems: 2
|
||||
uniqueItems: true
|
||||
items:
|
||||
enum:
|
||||
- 0
|
||||
- 1
|
||||
description:
|
||||
If you have 2 logical lanes the bridge supports
|
||||
reordering but only on physical ports 0 and 1.
|
||||
See ../../media/video-interface.txt for details.
|
||||
|
||||
- minItems: 4
|
||||
maxItems: 4
|
||||
uniqueItems: true
|
||||
items:
|
||||
enum:
|
||||
- 0
|
||||
- 1
|
||||
- 2
|
||||
- 3
|
||||
description:
|
||||
If you have 4 logical lanes the bridge supports
|
||||
reordering in any way.
|
||||
See ../../media/video-interface.txt for details.
|
||||
|
||||
lane-polarities:
|
||||
minItems: 1
|
||||
maxItems: 4
|
||||
items:
|
||||
enum:
|
||||
- 0
|
||||
- 1
|
||||
description: See ../../media/video-interface.txt
|
||||
|
||||
dependencies:
|
||||
lane-polarities: [data-lanes]
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
||||
required:
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
- port@0
|
||||
- port@1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- enable-gpios
|
||||
- vccio-supply
|
||||
- vpll-supply
|
||||
- vcca-supply
|
||||
- vcc-supply
|
||||
- ports
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bridge@2d {
|
||||
compatible = "ti,sn65dsi86";
|
||||
reg = <0x2d>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
vpll-supply = <&src_pp1800_s4a>;
|
||||
vccio-supply = <&src_pp1800_s4a>;
|
||||
vcca-supply = <&src_pp1200_l2a>;
|
||||
vcc-supply = <&src_pp1200_l2a>;
|
||||
|
||||
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
|
||||
clock-names = "refclk";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
endpoint {
|
||||
remote-endpoint = <&dsi0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
endpoint {
|
||||
remote-endpoint = <&panel_in_edp>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bridge@2d {
|
||||
compatible = "ti,sn65dsi86";
|
||||
reg = <0x2d>;
|
||||
|
||||
enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
|
||||
suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
vccio-supply = <&pm8916_l17>;
|
||||
vcca-supply = <&pm8916_l6>;
|
||||
vpll-supply = <&pm8916_l17>;
|
||||
vcc-supply = <&pm8916_l6>;
|
||||
|
||||
clock-names = "refclk";
|
||||
clocks = <&input_refclk>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
edp_bridge_in: endpoint {
|
||||
remote-endpoint = <&dsi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
edp_bridge_out: endpoint {
|
||||
data-lanes = <2 1 3 0>;
|
||||
lane-polarities = <0 1 0 1>;
|
||||
remote-endpoint = <&edp_panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user