Merge branch 'next' into for-linus

Prepare input updates for 4.21 merge window.

Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt

@@ -0,0 +1,26 @@
+Raspberry Pi firmware based 7" touchscreen
+=====================================
+
+Required properties:
+ - compatible: "raspberrypi,firmware-ts"
+
+Optional properties:
+ - firmware: Reference to RPi's firmware device node
+ - touchscreen-size-x: See touchscreen.txt
+ - touchscreen-size-y: See touchscreen.txt
+ - touchscreen-inverted-x: See touchscreen.txt
+ - touchscreen-inverted-y: See touchscreen.txt
+ - touchscreen-swapped-x-y: See touchscreen.txt
+
+Example:
+
+firmware: firmware-rpi {
+	compatible = "raspberrypi,bcm2835-firmware";
+	mboxes = <&mailbox>;
+
+	ts: touchscreen {
+		compatible = "raspberrypi,firmware-ts";
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};

Documentation/devicetree/bindings/serio/olpc,ap-sp.txt

@@ -4,10 +4,14 @@ Required properties:
 - compatible : "olpc,ap-sp"
 - reg : base address and length of SoC's WTM registers
 - interrupts : SP-AP interrupt
+- clocks : phandle + clock-specifier for the clock that drives the WTM
+- clock-names:  should be "sp"
 
 Example:
 	ap-sp@d4290000 {
 		compatible = "olpc,ap-sp";
 		reg = <0xd4290000 0x1000>;
 		interrupts = <40>;
+		clocks = <&soc_clocks MMP2_CLK_SP>;
+		clock-names = "sp";
 	}

drivers/clk/mmp/clk-of-mmp2.c

@@ -53,6 +53,7 @@
 #define APMU_DISP1	0x110
 #define APMU_CCIC0	0x50
 #define APMU_CCIC1	0xf4
+#define APMU_SP		0x68
 #define MPMU_UART_PLL	0x14
 
 struct mmp2_clk_unit {
@@ -209,6 +210,8 @@ static struct mmp_clk_mix_config ccic1_mix_config = {
 	.reg_info = DEFINE_MIX_REG_INFO(4, 16, 2, 6, 32),
 };
 
+static DEFINE_SPINLOCK(sp_lock);
+
 static struct mmp_param_mux_clk apmu_mux_clks[] = {
 	{MMP2_CLK_DISP0_MUX, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 2, 0, &disp0_lock},
 	{MMP2_CLK_DISP1_MUX, "disp1_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP1, 6, 2, 0, &disp1_lock},
@@ -239,6 +242,7 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	{MMP2_CLK_CCIC1, "ccic1_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x1b, 0x1b, 0x0, 0, &ccic1_lock},
 	{MMP2_CLK_CCIC1_PHY, "ccic1_phy_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x24, 0x24, 0x0, 0, &ccic1_lock},
 	{MMP2_CLK_CCIC1_SPHY, "ccic1_sphy_clk", "ccic1_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x300, 0x300, 0x0, 0, &ccic1_lock},
+	{MMP2_CLK_SP, "sp_clk", NULL, CLK_SET_RATE_PARENT, APMU_SP, 0x1b, 0x1b, 0x0, 0, &sp_lock},
 };
 
 static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit)

drivers/input/keyboard/nomadik-ske-keypad.c

@@ -100,7 +100,7 @@ static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
 	while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
 		cpu_relax();
 
-	if (!timeout)
+	if (timeout == -1)
 		return -EINVAL;
 
 	/*

drivers/input/misc/drv2667.c

@@ -177,9 +177,9 @@ static int drv2667_set_waveform_freq(struct drv2667_data *haptics)
 		error = regmap_write(haptics->regmap, DRV2667_PAGE, read_buf);
 		if (error) {
 			dev_err(&haptics->client->dev,
-					"Failed to set the page: %d\n", error);
+				"Failed to set the page: %d\n", error);
-				return -EIO;
+			return -EIO;
-			}
+		}
 	}
 
 	return error;

drivers/input/misc/rotary_encoder.c

@@ -240,8 +240,10 @@ static int rotary_encoder_probe(struct platform_device *pdev)
 
 	encoder->gpios = devm_gpiod_get_array(dev, NULL, GPIOD_IN);
 	if (IS_ERR(encoder->gpios)) {
-		dev_err(dev, "unable to get gpios\n");
+		err = PTR_ERR(encoder->gpios);
-		return PTR_ERR(encoder->gpios);
+		if (err != -EPROBE_DEFER)
+			dev_err(dev, "unable to get gpios: %d\n", err);
+		return err;
 	}
 	if (encoder->gpios->ndescs < 2) {
 		dev_err(dev, "not enough gpios found\n");

drivers/input/serio/Kconfig

@@ -254,7 +254,6 @@ config SERIO_APBPS2
 
 config SERIO_OLPC_APSP
 	tristate "OLPC AP-SP input support"
-	depends on OLPC || COMPILE_TEST
 	help
 	  Say Y here if you want support for the keyboard and touchpad included
 	  in the OLPC XO-1.75 and XO-4 laptops.

drivers/input/serio/olpc_apsp.c

@@ -23,6 +23,7 @@
 #include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 /*
  * The OLPC XO-1.75 and XO-4 laptops do not have a hardware PS/2 controller.
@@ -74,6 +75,7 @@ struct olpc_apsp {
 	struct serio *kbio;
 	struct serio *padio;
 	void __iomem *base;
+	struct clk *clk;
 	int open_count;
 	int irq;
 };
@@ -145,8 +147,21 @@ static int olpc_apsp_open(struct serio *port)
 {
 	struct olpc_apsp *priv = port->port_data;
 	unsigned int tmp;
+	unsigned long l;
+	int error;
 
 	if (priv->open_count++ == 0) {
+		error = clk_prepare_enable(priv->clk);
+		if (error)
+			return error;
+
+		l = readl(priv->base + COMMAND_FIFO_STATUS);
+		if (!(l & CMD_STS_MASK)) {
+			dev_err(priv->dev, "SP cannot accept commands.\n");
+			clk_disable_unprepare(priv->clk);
+			return -EIO;
+		}
+
 		/* Enable interrupt 0 by clearing its bit */
 		tmp = readl(priv->base + PJ_INTERRUPT_MASK);
 		writel(tmp & ~INT_0, priv->base + PJ_INTERRUPT_MASK);
@@ -164,6 +179,8 @@ static void olpc_apsp_close(struct serio *port)
 		/* Disable interrupt 0 */
 		tmp = readl(priv->base + PJ_INTERRUPT_MASK);
 		writel(tmp | INT_0, priv->base + PJ_INTERRUPT_MASK);
+
+		clk_disable_unprepare(priv->clk);
 	}
 }
 
@@ -172,15 +189,12 @@ static int olpc_apsp_probe(struct platform_device *pdev)
 	struct serio *kb_serio, *pad_serio;
 	struct olpc_apsp *priv;
 	struct resource *res;
-	struct device_node *np;
-	unsigned long l;
 	int error;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(struct olpc_apsp), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	np = pdev->dev.of_node;
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(priv->base)) {
@@ -192,11 +206,9 @@ static int olpc_apsp_probe(struct platform_device *pdev)
 	if (priv->irq < 0)
 		return priv->irq;
 
-	l = readl(priv->base + COMMAND_FIFO_STATUS);
+	priv->clk = devm_clk_get(&pdev->dev, "sp");
-	if (!(l & CMD_STS_MASK)) {
+	if (IS_ERR(priv->clk))
-		dev_err(&pdev->dev, "SP cannot accept commands.\n");
+		return PTR_ERR(priv->clk);
-		return -EIO;
-	}
 
 	/* KEYBOARD */
 	kb_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);

drivers/input/touchscreen/Kconfig

@@ -683,6 +683,18 @@ config TOUCHSCREEN_EDT_FT5X06
 	  To compile this driver as a module, choose M here: the
 	  module will be called edt-ft5x06.
 
+config TOUCHSCREEN_RASPBERRYPI_FW
+	tristate "Raspberry Pi's firmware base touch screen support"
+	depends on RASPBERRYPI_FIRMWARE || COMPILE_TEST
+	help
+	  Say Y here if you have the official Raspberry Pi 7 inch screen on
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called raspberrypi-ts.
+
 config TOUCHSCREEN_MIGOR
 	tristate "Renesas MIGO-R touchscreen"
 	depends on (SH_MIGOR || COMPILE_TEST) && I2C

drivers/input/touchscreen/Makefile

@@ -108,3 +108,4 @@ obj-$(CONFIG_TOUCHSCREEN_ZET6223)	+= zet6223.o
 obj-$(CONFIG_TOUCHSCREEN_ZFORCE)	+= zforce_ts.o
 obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50)	+= colibri-vf50-ts.o
 obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023)	+= rohm_bu21023.o
+obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW)	+= raspberrypi-ts.o

drivers/input/touchscreen/ad7879.c

@@ -29,10 +29,9 @@
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <linux/input/touchscreen.h>
-#include <linux/platform_data/ad7879.h>
 #include <linux/module.h>
 #include "ad7879.h"
 
@@ -290,7 +289,7 @@ static int ad7879_open(struct input_dev *input)
 	return 0;
 }
 
-static void ad7879_close(struct input_dev* input)
+static void ad7879_close(struct input_dev *input)
 {
 	struct ad7879 *ts = input_get_drvdata(input);
 
@@ -452,47 +451,36 @@ static void ad7879_gpio_set_value(struct gpio_chip *chip,
 	mutex_unlock(&ts->mutex);
 }
 
-static int ad7879_gpio_add(struct ad7879 *ts,
+static int ad7879_gpio_add(struct ad7879 *ts)
-			   const struct ad7879_platform_data *pdata)
 {
-	bool gpio_export;
-	int gpio_base;
 	int ret = 0;
 
-	if (pdata) {
-		gpio_export = pdata->gpio_export;
-		gpio_base = pdata->gpio_base;
-	} else {
-		gpio_export = device_property_read_bool(ts->dev,
-							"gpio-controller");
-		gpio_base = -1;
-	}
-
 	mutex_init(&ts->mutex);
 
-	if (gpio_export) {
+	/* Do not create a chip unless flagged for it */
-		ts->gc.direction_input = ad7879_gpio_direction_input;
+	if (!device_property_read_bool(ts->dev, "gpio-controller"))
-		ts->gc.direction_output = ad7879_gpio_direction_output;
+		return 0;
-		ts->gc.get = ad7879_gpio_get_value;
-		ts->gc.set = ad7879_gpio_set_value;
-		ts->gc.can_sleep = 1;
-		ts->gc.base = gpio_base;
-		ts->gc.ngpio = 1;
-		ts->gc.label = "AD7879-GPIO";
-		ts->gc.owner = THIS_MODULE;
-		ts->gc.parent = ts->dev;
 
-		ret = devm_gpiochip_add_data(ts->dev, &ts->gc, ts);
+	ts->gc.direction_input = ad7879_gpio_direction_input;
-		if (ret)
+	ts->gc.direction_output = ad7879_gpio_direction_output;
-			dev_err(ts->dev, "failed to register gpio %d\n",
+	ts->gc.get = ad7879_gpio_get_value;
-				ts->gc.base);
+	ts->gc.set = ad7879_gpio_set_value;
-	}
+	ts->gc.can_sleep = 1;
+	ts->gc.base = -1;
+	ts->gc.ngpio = 1;
+	ts->gc.label = "AD7879-GPIO";
+	ts->gc.owner = THIS_MODULE;
+	ts->gc.parent = ts->dev;
+
+	ret = devm_gpiochip_add_data(ts->dev, &ts->gc, ts);
+	if (ret)
+		dev_err(ts->dev, "failed to register gpio %d\n",
+			ts->gc.base);
 
 	return ret;
 }
 #else
-static int ad7879_gpio_add(struct ad7879 *ts,
+static int ad7879_gpio_add(struct ad7879 *ts)
-			   const struct ad7879_platform_data *pdata)
 {
 	return 0;
 }
@@ -527,7 +515,6 @@ static int ad7879_parse_dt(struct device *dev, struct ad7879 *ts)
 int ad7879_probe(struct device *dev, struct regmap *regmap,
 		 int irq, u16 bustype, u8 devid)
 {
-	struct ad7879_platform_data *pdata = dev_get_platdata(dev);
 	struct ad7879 *ts;
 	struct input_dev *input_dev;
 	int err;
@@ -542,22 +529,9 @@ int ad7879_probe(struct device *dev, struct regmap *regmap,
 	if (!ts)
 		return -ENOMEM;
 
-	if (pdata) {
+	err = ad7879_parse_dt(dev, ts);
-		/* Platform data use swapped axis (backward compatibility) */
+	if (err)
-		ts->swap_xy = !pdata->swap_xy;
+		return err;
-
-		ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
-
-		ts->first_conversion_delay = pdata->first_conversion_delay;
-		ts->acquisition_time = pdata->acquisition_time;
-		ts->averaging = pdata->averaging;
-		ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
-		ts->median = pdata->median;
-	} else {
-		err = ad7879_parse_dt(dev, ts);
-		if (err)
-			return err;
-	}
 
 	input_dev = devm_input_allocate_device(dev);
 	if (!input_dev) {
@@ -585,28 +559,13 @@ int ad7879_probe(struct device *dev, struct regmap *regmap,
 
 	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
 
-	if (pdata) {
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
-		input_set_abs_params(input_dev, ABS_X,
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
-				pdata->x_min ? : 0,
+	input_set_capability(input_dev, EV_ABS, ABS_PRESSURE);
-				pdata->x_max ? : MAX_12BIT,
+	touchscreen_parse_properties(input_dev, false, NULL);
-				0, 0);
+	if (!input_abs_get_max(input_dev, ABS_PRESSURE)) {
-		input_set_abs_params(input_dev, ABS_Y,
+		dev_err(dev, "Touchscreen pressure is not specified\n");
-				pdata->y_min ? : 0,
+		return -EINVAL;
-				pdata->y_max ? : MAX_12BIT,
-				0, 0);
-		input_set_abs_params(input_dev, ABS_PRESSURE,
-				pdata->pressure_min,
-				pdata->pressure_max ? : ~0,
-				0, 0);
-	} else {
-		input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
-		input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
-		input_set_capability(input_dev, EV_ABS, ABS_PRESSURE);
-		touchscreen_parse_properties(input_dev, false, NULL);
-		if (!input_abs_get_max(input_dev, ABS_PRESSURE)) {
-			dev_err(dev, "Touchscreen pressure is not specified\n");
-			return -EINVAL;
-		}
 	}
 
 	err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET);
@@ -655,7 +614,7 @@ int ad7879_probe(struct device *dev, struct regmap *regmap,
 	if (err)
 		return err;
 
-	err = ad7879_gpio_add(ts, pdata);
+	err = ad7879_gpio_add(ts);
 	if (err)
 		return err;
 

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -1585,10 +1585,10 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
 	/* T7 config may have changed */
 	mxt_init_t7_power_cfg(data);
 
-release_raw:
-	kfree(cfg.raw);
 release_mem:
 	kfree(cfg.mem);
+release_raw:
+	kfree(cfg.raw);
 	return ret;
 }
 

drivers/input/touchscreen/ektf2127.c

@@ -51,7 +51,7 @@ struct ektf2127_ts {
 	struct touchscreen_properties prop;
 };
 
-static void ektf2127_parse_coordinates(const u8* buf, unsigned int touch_count,
+static void ektf2127_parse_coordinates(const u8 *buf, unsigned int touch_count,
 				       struct input_mt_pos *touches)
 {
 	int index = 0;

drivers/input/touchscreen/gunze.c

@@ -53,7 +53,7 @@ struct gunze {
 	char phys[32];
 };
 
-static void gunze_process_packet(struct gunze* gunze)
+static void gunze_process_packet(struct gunze *gunze)
 {
 	struct input_dev *dev = gunze->dev;
 
@@ -72,7 +72,7 @@ static void gunze_process_packet(struct gunze* gunze)
 static irqreturn_t gunze_interrupt(struct serio *serio,
 		unsigned char data, unsigned int flags)
 {
-	struct gunze* gunze = serio_get_drvdata(serio);
+	struct gunze *gunze = serio_get_drvdata(serio);
 
 	if (data == '\r') {
 		gunze_process_packet(gunze);

drivers/input/touchscreen/inexio.c

@@ -79,7 +79,7 @@ static void inexio_process_data(struct inexio *pinexio)
 static irqreturn_t inexio_interrupt(struct serio *serio,
 		unsigned char data, unsigned int flags)
 {
-	struct inexio* pinexio = serio_get_drvdata(serio);
+	struct inexio *pinexio = serio_get_drvdata(serio);
 
 	pinexio->data[pinexio->idx] = data;
 
@@ -97,7 +97,7 @@ static irqreturn_t inexio_interrupt(struct serio *serio,
 
 static void inexio_disconnect(struct serio *serio)
 {
-	struct inexio* pinexio = serio_get_drvdata(serio);
+	struct inexio *pinexio = serio_get_drvdata(serio);
 
 	input_get_device(pinexio->dev);
 	input_unregister_device(pinexio->dev);

drivers/input/touchscreen/mtouch.c

@@ -90,7 +90,7 @@ static void mtouch_process_response(struct mtouch *mtouch)
 static irqreturn_t mtouch_interrupt(struct serio *serio,
 		unsigned char data, unsigned int flags)
 {
-	struct mtouch* mtouch = serio_get_drvdata(serio);
+	struct mtouch *mtouch = serio_get_drvdata(serio);
 
 	mtouch->data[mtouch->idx] = data;
 
@@ -110,7 +110,7 @@ static irqreturn_t mtouch_interrupt(struct serio *serio,
 
 static void mtouch_disconnect(struct serio *serio)
 {
-	struct mtouch* mtouch = serio_get_drvdata(serio);
+	struct mtouch *mtouch = serio_get_drvdata(serio);
 
 	input_get_device(mtouch->dev);
 	input_unregister_device(mtouch->dev);

drivers/input/touchscreen/raspberrypi-ts.c

@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Raspberry Pi firmware based touchscreen driver
+ *
+ * Copyright (C) 2015, 2017 Raspberry Pi
+ * Copyright (C) 2018 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input-polldev.h>
+#include <linux/input/touchscreen.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+#define RPI_TS_DEFAULT_WIDTH	800
+#define RPI_TS_DEFAULT_HEIGHT	480
+
+#define RPI_TS_MAX_SUPPORTED_POINTS	10
+
+#define RPI_TS_FTS_TOUCH_DOWN		0
+#define RPI_TS_FTS_TOUCH_CONTACT	2
+
+#define RPI_TS_POLL_INTERVAL		17	/* 60fps */
+
+#define RPI_TS_NPOINTS_REG_INVALIDATE	99
+
+struct rpi_ts {
+	struct platform_device *pdev;
+	struct input_polled_dev *poll_dev;
+	struct touchscreen_properties prop;
+
+	void __iomem *fw_regs_va;
+	dma_addr_t fw_regs_phys;
+
+	int known_ids;
+};
+
+struct rpi_ts_regs {
+	u8 device_mode;
+	u8 gesture_id;
+	u8 num_points;
+	struct rpi_ts_touch {
+		u8 xh;
+		u8 xl;
+		u8 yh;
+		u8 yl;
+		u8 pressure; /* Not supported */
+		u8 area;     /* Not supported */
+	} point[RPI_TS_MAX_SUPPORTED_POINTS];
+};
+
+static void rpi_ts_poll(struct input_polled_dev *dev)
+{
+	struct input_dev *input = dev->input;
+	struct rpi_ts *ts = dev->private;
+	struct rpi_ts_regs regs;
+	int modified_ids = 0;
+	long released_ids;
+	int event_type;
+	int touchid;
+	int x, y;
+	int i;
+
+	memcpy_fromio(&regs, ts->fw_regs_va, sizeof(regs));
+	/*
+	 * We poll the memory based register copy of the touchscreen chip using
+	 * the number of points register to know whether the copy has been
+	 * updated (we write 99 to the memory copy, the GPU will write between
+	 * 0 - 10 points)
+	 */
+	iowrite8(RPI_TS_NPOINTS_REG_INVALIDATE,
+		 ts->fw_regs_va + offsetof(struct rpi_ts_regs, num_points));
+
+	if (regs.num_points == RPI_TS_NPOINTS_REG_INVALIDATE ||
+	    (regs.num_points == 0 && ts->known_ids == 0))
+		return;
+
+	for (i = 0; i < regs.num_points; i++) {
+		x = (((int)regs.point[i].xh & 0xf) << 8) + regs.point[i].xl;
+		y = (((int)regs.point[i].yh & 0xf) << 8) + regs.point[i].yl;
+		touchid = (regs.point[i].yh >> 4) & 0xf;
+		event_type = (regs.point[i].xh >> 6) & 0x03;
+
+		modified_ids |= BIT(touchid);
+
+		if (event_type == RPI_TS_FTS_TOUCH_DOWN ||
+		    event_type == RPI_TS_FTS_TOUCH_CONTACT) {
+			input_mt_slot(input, touchid);
+			input_mt_report_slot_state(input, MT_TOOL_FINGER, 1);
+			touchscreen_report_pos(input, &ts->prop, x, y, true);
+		}
+	}
+
+	released_ids = ts->known_ids & ~modified_ids;
+	for_each_set_bit(i, &released_ids, RPI_TS_MAX_SUPPORTED_POINTS) {
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, 0);
+		modified_ids &= ~(BIT(i));
+	}
+	ts->known_ids = modified_ids;
+
+	input_mt_sync_frame(input);
+	input_sync(input);
+}
+
+static void rpi_ts_dma_cleanup(void *data)
+{
+	struct rpi_ts *ts = data;
+	struct device *dev = &ts->pdev->dev;
+
+	dma_free_coherent(dev, PAGE_SIZE, ts->fw_regs_va, ts->fw_regs_phys);
+}
+
+static int rpi_ts_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct input_polled_dev *poll_dev;
+	struct device_node *fw_node;
+	struct rpi_firmware *fw;
+	struct input_dev *input;
+	struct rpi_ts *ts;
+	u32 touchbuf;
+	int error;
+
+	fw_node = of_get_parent(np);
+	if (!fw_node) {
+		dev_err(dev, "Missing firmware node\n");
+		return -ENOENT;
+	}
+
+	fw = rpi_firmware_get(fw_node);
+	of_node_put(fw_node);
+	if (!fw)
+		return -EPROBE_DEFER;
+
+	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+	ts->pdev = pdev;
+
+	ts->fw_regs_va = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->fw_regs_phys,
+					     GFP_KERNEL);
+	if (!ts->fw_regs_va) {
+		dev_err(dev, "failed to dma_alloc_coherent\n");
+		return -ENOMEM;
+	}
+
+	error = devm_add_action_or_reset(dev, rpi_ts_dma_cleanup, ts);
+	if (error) {
+		dev_err(dev, "failed to devm_add_action_or_reset, %d\n", error);
+		return error;
+	}
+
+
+	touchbuf = (u32)ts->fw_regs_phys;
+	error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF,
+				      &touchbuf, sizeof(touchbuf));
+
+	if (error || touchbuf != 0) {
+		dev_warn(dev, "Failed to set touchbuf, %d\n", error);
+		return error;
+	}
+
+	poll_dev = devm_input_allocate_polled_device(dev);
+	if (!poll_dev) {
+		dev_err(dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+	ts->poll_dev = poll_dev;
+	input = poll_dev->input;
+
+	input->name = "raspberrypi-ts";
+	input->id.bustype = BUS_HOST;
+	poll_dev->poll_interval = RPI_TS_POLL_INTERVAL;
+	poll_dev->poll = rpi_ts_poll;
+	poll_dev->private = ts;
+
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+			     RPI_TS_DEFAULT_WIDTH, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+			     RPI_TS_DEFAULT_HEIGHT, 0, 0);
+	touchscreen_parse_properties(input, true, &ts->prop);
+
+	error = input_mt_init_slots(input, RPI_TS_MAX_SUPPORTED_POINTS,
+				    INPUT_MT_DIRECT);
+	if (error) {
+		dev_err(dev, "could not init mt slots, %d\n", error);
+		return error;
+	}
+
+	error = input_register_polled_device(poll_dev);
+	if (error) {
+		dev_err(dev, "could not register input device, %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id rpi_ts_match[] = {
+	{ .compatible = "raspberrypi,firmware-ts", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rpi_ts_match);
+
+static struct platform_driver rpi_ts_driver = {
+	.driver = {
+		.name   = "raspberrypi-ts",
+		.of_match_table = rpi_ts_match,
+	},
+	.probe          = rpi_ts_probe,
+};
+module_platform_driver(rpi_ts_driver);
+
+MODULE_AUTHOR("Gordon Hollingworth");
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
+MODULE_DESCRIPTION("Raspberry Pi firmware based touchscreen driver");
+MODULE_LICENSE("GPL v2");

include/dt-bindings/clock/marvell,mmp2.h

@@ -71,6 +71,7 @@
 #define MMP2_CLK_CCIC1_MIX		117
 #define MMP2_CLK_CCIC1_PHY		118
 #define MMP2_CLK_CCIC1_SPHY		119
+#define MMP2_CLK_SP			120
 
 #define MMP2_NR_CLKS			200
 #endif

include/linux/platform_data/ad7879.h

@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* linux/platform_data/ad7879.h */
-
-/* Touchscreen characteristics vary between boards and models.  The
- * platform_data for the device's "struct device" holds this information.
- *
- * It's OK if the min/max values are zero.
- */
-struct ad7879_platform_data {
-	u16	model;			/* 7879 */
-	u16	x_plate_ohms;
-	u16	x_min, x_max;
-	u16	y_min, y_max;
-	u16	pressure_min, pressure_max;
-
-	bool	swap_xy;		/* swap x and y axes */
-
-	/* [0..255] 0=OFF Starts at 1=550us and goes
-	 * all the way to 9.440ms in steps of 35us.
-	 */
-	u8	pen_down_acc_interval;
-	/* [0..15] Starts at 0=128us and goes all the
-	 * way to 4.096ms in steps of 128us.
-	 */
-	u8	first_conversion_delay;
-	/* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
-	u8	acquisition_time;
-	/* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */
-	u8	averaging;
-	/* [0..3] Perform X measurements 0 = OFF,
-	 * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
-	 */
-	u8	median;
-	/* 1 = AUX/VBAT/GPIO export GPIO to gpiolib
-	 * requires CONFIG_GPIOLIB
-	 */
-	bool	gpio_export;
-	/* identifies the first GPIO number handled by this chip;
-	 * or, if negative, requests dynamic ID allocation.
-	 */
-	s32	gpio_base;
-};