2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 18:53:52 +08:00

OMAP3: PM: Restore MMU table entry

During the MMU restoration on the restore path from MPU OFF, the page
table entry for the page consisting of the code being executed is
modified to make MMU return VA=PA.

The MMU is then enabled and the original entry is being stored in
scratchpad.  This patch reads the original values stored in
scratchpad, and restores them back.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This commit is contained in:
Rajendra Nayak 2008-09-26 17:49:34 +05:30 committed by Kevin Hilman
parent fa3c2a4fc9
commit 57f277b012

View File

@ -29,6 +29,8 @@
#include <plat/control.h>
#include <plat/serial.h>
#include <asm/tlbflush.h>
#include "cm.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
@ -164,6 +166,35 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
return IRQ_HANDLED;
}
static void restore_control_register(u32 val)
{
__asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 0" : : "r" (val));
}
/* Function to restore the table entry that was modified for enabling MMU */
static void restore_table_entry(void)
{
u32 *scratchpad_address;
u32 previous_value, control_reg_value;
u32 *address;
scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
/* Get address of entry that was modified */
address = (u32 *)__raw_readl(scratchpad_address +
OMAP343X_TABLE_ADDRESS_OFFSET);
/* Get the previous value which needs to be restored */
previous_value = __raw_readl(scratchpad_address +
OMAP343X_TABLE_VALUE_OFFSET);
address = __va(address);
*address = previous_value;
flush_tlb_all();
control_reg_value = __raw_readl(scratchpad_address
+ OMAP343X_CONTROL_REG_VALUE_OFFSET);
/* This will enable caches and prediction */
restore_control_register(control_reg_value);
}
static void omap_sram_idle(void)
{
/* Variable to tell what needs to be saved and restored
@ -220,6 +251,10 @@ static void omap_sram_idle(void)
_omap_sram_idle(NULL, save_state);
cpu_init();
/* Restore table entry modified during MMU restoration */
if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF)
restore_table_entry();
if (core_next_state < PWRDM_POWER_ON) {
if (per_next_state < PWRDM_POWER_ON)
omap_uart_resume_idle(2);