The imx soc changes for 3.10:

* Enable anatop, well bisa and RBC for suspend to optimize the power
   consumption a little bit
 * Clock changes for TVE, LDB, PATA, SRTC support
 * Add System Reset Controller (SRC) support for imx5 and imx6
 * Add initial imx6dl support based on imx6q code
 * Kconfig for cpufreq-cpu0, defconfig updates and few other changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRZ/viAAoJEFBXWFqHsHzOyqUH/2t7CCwlfTVUJYDCeo6PaE9x
 41cV5zG6RvX1OfkRUmJ2N2klGn4zhwg6GHsCDQmvs+IODs4E7JeB9M92FAaPng71
 NnuuwCQ01iIoaTtkz8z/n3tSet3fYB+xfNCMJoWIyS0edFFkCjOgnqRsA0pHRIOp
 G6ey1kU80D0f4+DjAUg1mkIvJrZxbRKDwmwqfDGJzQ4VU7cv70n027YuMKbeMyCC
 zdeKmpKSEl9AY+O/zeMrf03zEW+kdZ4eB6cTUFlpzYwPYY9o+XHx0U0535F7/x4+
 KObUZ9Qg7liP5WO3ZzkVff5HJqPs6s/q99eOsU4/okF1x0fpq2mSgIHlSw4HpK8=
 =TuTx
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc2

From Shawn Guo:
The imx soc changes for 3.10:

* Enable anatop, well bisa and RBC for suspend to optimize the power
  consumption a little bit
* Clock changes for TVE, LDB, PATA, SRTC support
* Add System Reset Controller (SRC) support for imx5 and imx6
* Add initial imx6dl support based on imx6q code
* Kconfig for cpufreq-cpu0, defconfig updates and few other changes

* tag 'imx-soc-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (275 commits)
  ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
  ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
  ARM i.MX53: make tve_ext_sel propagate rate change to PLL
  ARM i.MX53: Remove unused tve_gate clkdev entry
  ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
  ARM: i.MX5: Add PATA and SRTC clocks
  ARM: imx: do not bring up unavailable cores
  ARM: imx: add initial imx6dl support
  ARM: imx1: mm: add call to mxc_device_init
  ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
  ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
  ARM: i.MX53 Add the cko1, cko2 clock outputs.
  staging: drm/imx: Use SRC to reset IPU
  ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)
  ARM: imx: do not use regmap_read for ANADIG_DIGPROG
  ARM i.MX6q: set the LDB serial clock parent to the video PLL
  ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1
  ARM i.MX6q: fix ldb di divider and selector clocks
  ARM i.MX53: fix ldb di divider and selector clocks
  ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Trivial change/change conflict in arch/arm/mach-imx/mach-imx6q.c resolved.

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -38,7 +38,6 @@ clocks and IDs.
 	usb_phy_podf		23
 	cpu_podf		24
 	di_pred			25
-	tve_di			26
 	tve_s			27
 	uart1_ipg_gate		28
 	uart1_per_gate		29
@@ -172,6 +171,19 @@ clocks and IDs.
 	can1_serial_gate	157
 	can1_ipg_gate		158
 	owire_gate		159
+	gpu3d_s			160
+	gpu2d_s			161
+	gpu3d_gate		162
+	gpu2d_gate		163
+	garb_gate		164
+	cko1_sel		165
+	cko1_podf		166
+	cko1			167
+	cko2_sel		168
+	cko2_podf		169
+	cko2			170
+	srtc_gate		171
+	pata_gate		172
 
 Examples (for mx53):
 

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -205,6 +205,9 @@ clocks and IDs.
 	enet_ref		190
 	usbphy1_gate		191
 	usbphy2_gate		192
+	pll4_post_div		193
+	pll5_post_div		194
+	pll5_video_div		195
 
 Examples:
 

Documentation/devicetree/bindings/reset/fsl,imx-src.txt

@@ -0,0 +1,49 @@
+Freescale i.MX System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "fsl,<chip>-src"
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain SRC interrupt and CPU WDOG interrupt,
+  in this order.
+- #reset-cells: 1, see below
+
+example:
+
+src: src@020d8000 {
+        compatible = "fsl,imx6q-src";
+        reg = <0x020d8000 0x4000>;
+        interrupts = <0 91 0x04 0 96 0x04>;
+        #reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The system reset controller can be used to reset the GPU, VPU,
+IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
+nodes should specify the reset line on the SRC in their resets
+property, containing a phandle to the SRC device node and a
+RESET_INDEX specifying which module to reset, as described in
+reset.txt
+
+example:
+
+        ipu1: ipu@02400000 {
+                resets = <&src 2>;
+        };
+        ipu2: ipu@02800000 {
+                resets = <&src 4>;
+        };
+
+The following RESET_INDEX values are valid for i.MX5:
+GPU_RESET     0
+VPU_RESET     1
+IPU1_RESET    2
+OPEN_VG_RESET 3
+The following additional RESET_INDEX value is valid for i.MX6:
+IPU2_RESET    4

Documentation/devicetree/bindings/reset/reset.txt

@@ -0,0 +1,75 @@
+= Reset Signal Device Tree Bindings =
+
+This binding is intended to represent the hardware reset signals present
+internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole
+standalone chips are most likely better represented as GPIOs, although there
+are likely to be exceptions to this rule.
+
+Hardware blocks typically receive a reset signal. This signal is generated by
+a reset provider (e.g. power management or clock module) and received by a
+reset consumer (the module being reset, or a module managing when a sub-
+ordinate module is reset). This binding exists to represent the provider and
+consumer, and provide a way to couple the two together.
+
+A reset signal is represented by the phandle of the provider, plus a reset
+specifier - a list of DT cells that represents the reset signal within the
+provider. The length (number of cells) and semantics of the reset specifier
+are dictated by the binding of the reset provider, although common schemes
+are described below.
+
+A word on where to place reset signal consumers in device tree: It is possible
+in hardware for a reset signal to affect multiple logically separate HW blocks
+at once. In this case, it would be unwise to represent this reset signal in
+the DT node of each affected HW block, since if activated, an unrelated block
+may be reset. Instead, reset signals should be represented in the DT node
+where it makes most sense to control it; this may be a bus node if all
+children of the bus are affected by the reset signal, or an individual HW
+block node for dedicated reset signals. The intent of this binding is to give
+appropriate software access to the reset signals in order to manage the HW,
+rather than to slavishly enumerate the reset signal that affects each HW
+block.
+
+= Reset providers =
+
+Required properties:
+#reset-cells:	Number of cells in a reset specifier; Typically 0 for nodes
+		with a single reset output and 1 for nodes with multiple
+		reset outputs.
+
+For example:
+
+	rst: reset-controller {
+		#reset-cells = <1>;
+	};
+
+= Reset consumers =
+
+Required properties:
+resets:		List of phandle and reset specifier pairs, one pair
+		for each reset signal that affects the device, or that the
+		device manages. Note: if the reset provider specifies '0' for
+		#reset-cells, then only the phandle portion of the pair will
+		appear.
+
+Optional properties:
+reset-names:	List of reset signal name strings sorted in the same order as
+		the resets property. Consumers drivers will use reset-names to
+		match reset signal names with reset specifiers.
+
+For example:
+
+	device {
+		resets = <&rst 20>;
+		reset-names = "reset";
+	};
+
+This represents a device with a single reset signal named "reset".
+
+	bus {
+		resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>;
+		reset-names = "i2s1", "i2s2", "dma", "mixer";
+	};
+
+This represents a bus that controls the reset signal of each of four sub-
+ordinate devices. Consider for example a bus that fails to operate unless no
+child device has reset asserted.

Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt

@@ -8,6 +8,8 @@ Required properties:
 - interrupts: Should contain sync interrupt and error interrupt,
   in this order.
 - #crtc-cells: 1, See below
+- resets: phandle pointing to the system reset controller and
+          reset line index, see reset/fsl,imx-src.txt for details
 
 example:
 
@@ -16,6 +18,7 @@ ipu: ipu@18000000 {
 	compatible = "fsl,imx53-ipu";
 	reg = <0x18000000 0x080000000>;
 	interrupts = <11 10>;
+	resets = <&src 2>;
 };
 
 Parallel display support

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
     power_save	- Automatic power-saving timeout (in second, 0 =
 		disable)
-    power_save_controller - Support runtime D3 of HD-audio controller
+    power_save_controller - Reset HD-audio controller in power-saving mode
-		(-1 = on for supported chip (default), false = off,
+		(default = on)
-		 true = force to on even for unsupported hardware)
     align_buffer_size - Force rounding of buffer/period sizes to multiples
     		      of 128 bytes. This is more efficient in terms of memory
 		      access but isn't required by the HDA spec and prevents

MAINTAINERS

@@ -5065,9 +5065,8 @@ S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
 
 MARVELL LIBERTAS WIRELESS DRIVER
-M:	Dan Williams <dcbw@redhat.com>
 L:	libertas-dev@lists.infradead.org
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
@@ -5569,6 +5568,7 @@ F:	include/uapi/linux/if_*
 F:	include/uapi/linux/netdevice.h
 
 NETXEN (1/10) GbE SUPPORT
+M:	Manish Chopra <manish.chopra@qlogic.com>
 M:	Sony Chacko <sony.chacko@qlogic.com>
 M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
 L:	netdev@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/alpha/Makefile

@@ -12,7 +12,7 @@ NM := $(NM) -B
 
 LDFLAGS_vmlinux	:= -static -N #-relax
 CHECKFLAGS	+= -D__alpha__ -m64
-cflags-y	:= -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y	:= -pipe -mno-fp-regs -ffixed-8
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
 cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4

arch/alpha/include/asm/floppy.h

@@ -26,7 +26,7 @@
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
 #define fd_cacheflush(addr,size) /* nothing */
 #define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt,\
-					    IRQF_DISABLED, "floppy", NULL)
+					    0, "floppy", NULL)
 #define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL)
 
 #ifdef CONFIG_PCI

arch/alpha/kernel/irq.c

@@ -117,13 +117,6 @@ handle_irq(int irq)
 		return;
 	}
 
-	/*
-	 * From here we must proceed with IPL_MAX. Note that we do not
-	 * explicitly enable interrupts afterwards - some MILO PALcode
-	 * (namely LX164 one) seems to have severe problems with RTI
-	 * at IPL 0.
-	 */
-	local_irq_disable();
 	irq_enter();
 	generic_handle_irq_desc(irq, desc);
 	irq_exit();

arch/alpha/kernel/irq_alpha.c

@@ -45,6 +45,14 @@ do_entInt(unsigned long type, unsigned long vector,
 	  unsigned long la_ptr, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
+
+	/*
+	 * Disable interrupts during IRQ handling.
+	 * Note that there is no matching local_irq_enable() due to
+	 * severe problems with RTI at IPL0 and some MILO PALcode
+	 * (namely LX164).
+	 */
+	local_irq_disable();
 	switch (type) {
 	case 0:
 #ifdef CONFIG_SMP
@@ -62,7 +70,6 @@ do_entInt(unsigned long type, unsigned long vector,
 	  {
 		long cpu;
 
-		local_irq_disable();
 		smp_percpu_timer_interrupt(regs);
 		cpu = smp_processor_id();
 		if (cpu != boot_cpuid) {
@@ -222,7 +229,6 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
 
 struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
 	.name		= "timer",
 };
 

arch/alpha/kernel/sys_nautilus.c

@@ -188,6 +188,10 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 extern void free_reserved_mem(void *, void *);
 extern void pcibios_claim_one_bus(struct pci_bus *);
 
+static struct resource irongate_io = {
+	.name	= "Irongate PCI IO",
+	.flags	= IORESOURCE_IO,
+};
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -209,6 +213,7 @@ nautilus_init_pci(void)
 
 	irongate = pci_get_bus_and_slot(0, 0);
 	bus->self = irongate;
+	bus->resource[0] = &irongate_io;
 	bus->resource[1] = &irongate_mem;
 
 	pci_bus_size_bridges(bus);

arch/alpha/kernel/sys_titan.c

@@ -280,15 +280,15 @@ titan_late_init(void)
 	 * all reported to the kernel as machine checks, so the handler
 	 * is a nop so it can be called to count the individual events.
 	 */
-	titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(63+16, titan_intr_nop, 0,
 		    "CChip Error", NULL);
-	titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(62+16, titan_intr_nop, 0,
 		    "PChip 0 H_Error", NULL);
-	titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(61+16, titan_intr_nop, 0,
 		    "PChip 1 H_Error", NULL);
-	titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(60+16, titan_intr_nop, 0,
 		    "PChip 0 C_Error", NULL);
-	titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(59+16, titan_intr_nop, 0,
 		    "PChip 1 C_Error", NULL);
 
 	/* 
@@ -348,9 +348,9 @@ privateer_init_pci(void)
 	 * Hook a couple of extra err interrupts that the
 	 * common titan code won't.
 	 */
-	titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(53+16, titan_intr_nop, 0,
 		    "NMI", NULL);
-	titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(50+16, titan_intr_nop, 0,
 		    "Temperature Warning", NULL);
 
 	/*

arch/arm/Kconfig

@@ -1183,9 +1183,9 @@ config ARM_NR_BANKS
 	default 8
 
 config IWMMXT
-	bool "Enable iWMMXt support"
+	bool "Enable iWMMXt support" if !CPU_PJ4
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || ARCH_MMP
+	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -1439,6 +1439,16 @@ config ARM_ERRATA_775420
 	 to deadlock. This workaround puts DSB before executing ISB if
 	 an abort may occur on cache maintenance.
 
+config ARM_ERRATA_798181
+	bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+	depends on CPU_V7 && SMP
+	help
+	  On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+	  adequately shooting down all use of the old entries. This
+	  option enables the Linux kernel workaround for this erratum
+	  which sends an IPI to the CPUs that are running the same ASID
+	  as the one being invalidated.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -2154,13 +2164,6 @@ if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_MXC && CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
 config CPU_FREQ_SA1100
 	bool
 

arch/arm/Kconfig.debug

@@ -234,11 +234,11 @@ choice
 		  on i.MX53.
 
 	config DEBUG_IMX6Q_UART
-		bool "i.MX6Q Debug UART"
+		bool "i.MX6Q/DL Debug UART"
 		depends on SOC_IMX6Q
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX6Q.
+		  on i.MX6Q/DL.
 
 	config DEBUG_MMP_UART2
 		bool "Kernel low-level debugging message via MMP UART2"

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -54,7 +54,7 @@
 		};
 
 		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins2>;
+			pinctrl-0 = <&sdio_pins3>;
 			pinctrl-names = "default";
 			status = "okay";
 			/*

arch/arm/boot/dts/armada-370.dtsi

@@ -59,6 +59,12 @@
 					     "mpp50", "mpp51", "mpp52";
 			      marvell,function = "sd0";
 			};
+
+			sdio_pins3: sdio-pins3 {
+			      marvell,pins = "mpp48", "mpp49", "mpp50",
+					     "mpp51", "mpp52", "mpp53";
+			      marvell,function = "sd0";
+			};
 	        };
 
 		gpio0: gpio@d0018100 {

arch/arm/boot/dts/dbx5x0.dtsi

@@ -191,8 +191,8 @@
 
 		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x1000>;
+			reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
-			reg-names = "prcmu";
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
 			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
 			#size-cells = <1>;

arch/arm/boot/dts/imx6qdl.dtsi

@@ -91,6 +91,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
+			clocks = <&clks 15>;
 		};
 
 		L2: l2-cache@00a02000 {

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -77,6 +77,7 @@
 		};
 
 		nand@3000000 {
+			chip-delay = <40>;
 			status = "okay";
 
 			partition@0 {

arch/arm/boot/dts/orion5x.dtsi

@@ -13,6 +13,9 @@
 	compatible = "marvell,orion5x";
 	interrupt-parent = <&intc>;
 
+	aliases {
+		gpio0 = &gpio0;
+	};
 	intc: interrupt-controller {
 		compatible = "marvell,orion-intc", "marvell,intc";
 		interrupt-controller;
@@ -32,7 +35,9 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10100 0x40>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <6>, <7>, <8>, <9>;
 		};
 
@@ -91,7 +96,7 @@
 			reg = <0x90000 0x10000>,
 			      <0xf2200000 0x800>;
 			reg-names = "regs", "sram";
-			interrupts = <22>;
+			interrupts = <28>;
 			status = "okay";
 		};
 	};

arch/arm/configs/imx_v4_v5_defconfig

@@ -109,6 +109,7 @@ CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -9,6 +9,7 @@ CONFIG_CGROUPS=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y

arch/arm/include/asm/delay.h

@@ -24,7 +24,7 @@ extern struct arm_delay_ops {
 	void (*delay)(unsigned long);
 	void (*const_udelay)(unsigned long);
 	void (*udelay)(unsigned long);
-	bool const_clock;
+	unsigned long ticks_per_jiffy;
 } arm_delay_ops;
 
 #define __delay(n)		arm_delay_ops.delay(n)

arch/arm/include/asm/highmem.h

@@ -41,6 +41,13 @@ extern void kunmap_high(struct page *page);
 #endif
 #endif
 
+/*
+ * Needed to be able to broadcast the TLB invalidation for kmap.
+ */
+#ifdef CONFIG_ARM_ERRATA_798181
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#endif
+
 #ifdef ARCH_NEEDS_KMAP_HIGH_GET
 extern void *kmap_high_get(struct page *page);
 #else

arch/arm/include/asm/mmu_context.h

@@ -27,6 +27,8 @@ void __check_vmalloc_seq(struct mm_struct *mm);
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
 #define init_new_context(tsk,mm)	({ atomic64_set(&mm->context.id, 0); 0; })
 
+DECLARE_PER_CPU(atomic64_t, active_asids);
+
 #else	/* !CONFIG_CPU_HAS_ASID */
 
 #ifdef CONFIG_MMU

arch/arm/include/asm/tlbflush.h

@@ -450,6 +450,21 @@ static inline void local_flush_bp_all(void)
 		isb();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+	/*
+	 * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
+	 */
+	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+	dsb();
+}
+#else
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+}
+#endif
+
 /*
  *	flush_pmd_entry
  *

arch/arm/kernel/entry-common.S

@@ -276,7 +276,13 @@ ENDPROC(ftrace_graph_caller_old)
  */
 
 .macro mcount_enter
+/*
+ * This pad compensates for the push {lr} at the call site.  Note that we are
+ * unable to unwind through a function which does not otherwise save its lr.
+ */
+ UNWIND(.pad	#4)
 	stmdb	sp!, {r0-r3, lr}
+ UNWIND(.save	{r0-r3, lr})
 .endm
 
 .macro mcount_get_lr reg
@@ -289,6 +295,7 @@ ENDPROC(ftrace_graph_caller_old)
 .endm
 
 ENTRY(__gnu_mcount_nc)
+UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
 	mov	ip, lr
 	ldmia	sp!, {lr}
@@ -296,17 +303,22 @@ ENTRY(__gnu_mcount_nc)
 #else
 	__mcount
 #endif
+UNWIND(.fnend)
 ENDPROC(__gnu_mcount_nc)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller)
+UNWIND(.fnstart)
 	__ftrace_caller
+UNWIND(.fnend)
 ENDPROC(ftrace_caller)
 #endif
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
+UNWIND(.fnstart)
 	__ftrace_graph_caller
+UNWIND(.fnend)
 ENDPROC(ftrace_graph_caller)
 #endif
 

arch/arm/kernel/head.S

@@ -267,7 +267,7 @@ __create_page_tables:
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
 
-#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
+#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
 	sub	r4, r4, #4			@ Fixup page table pointer
 						@ for 64-bit descriptors
 #endif

arch/arm/kernel/hw_breakpoint.c

@@ -966,7 +966,7 @@ static void reset_ctrl_regs(void *unused)
 	}
 
 	if (err) {
-		pr_warning("CPU %d debug is powered down!\n", cpu);
+		pr_warn_once("CPU %d debug is powered down!\n", cpu);
 		cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
 		return;
 	}
@@ -987,7 +987,7 @@ clear_vcr:
 	isb();
 
 	if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
-		pr_warning("CPU %d failed to disable vector catch\n", cpu);
+		pr_warn_once("CPU %d failed to disable vector catch\n", cpu);
 		return;
 	}
 
@@ -1007,7 +1007,7 @@ clear_vcr:
 	}
 
 	if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
-		pr_warning("CPU %d failed to clear debug register pairs\n", cpu);
+		pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu);
 		return;
 	}
 

arch/arm/kernel/setup.c

@@ -353,6 +353,23 @@ void __init early_print(const char *str, ...)
 	printk("%s", buf);
 }
 
+static void __init cpuid_init_hwcaps(void)
+{
+	unsigned int divide_instrs;
+
+	if (cpu_architecture() < CPU_ARCH_ARMv7)
+		return;
+
+	divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24;
+
+	switch (divide_instrs) {
+	case 2:
+		elf_hwcap |= HWCAP_IDIVA;
+	case 1:
+		elf_hwcap |= HWCAP_IDIVT;
+	}
+}
+
 static void __init feat_v6_fixup(void)
 {
 	int id = read_cpuid_id();
@@ -483,8 +500,11 @@ static void __init setup_processor(void)
 	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
 		 list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
+
+	cpuid_init_hwcaps();
+
 #ifndef CONFIG_ARM_THUMB
-	elf_hwcap &= ~HWCAP_THUMB;
+	elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
 #endif
 
 	feat_v6_fixup();
@@ -524,7 +544,7 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
 
-#ifndef CONFIG_LPAE
+#ifndef CONFIG_ARM_LPAE
 	if (bank->start + size < bank->start) {
 		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
 			"32-bit physical address space\n", (long long)start);

arch/arm/kernel/smp.c

@@ -673,9 +673,6 @@ static int cpufreq_callback(struct notifier_block *nb,
 	if (freq->flags & CPUFREQ_CONST_LOOPS)
 		return NOTIFY_OK;
 
-	if (arm_delay_ops.const_clock)
-		return NOTIFY_OK;
-
 	if (!per_cpu(l_p_j_ref, cpu)) {
 		per_cpu(l_p_j_ref, cpu) =
 			per_cpu(cpu_data, cpu).loops_per_jiffy;

arch/arm/kernel/smp_tlb.c

@@ -12,6 +12,7 @@
 
 #include <asm/smp_plat.h>
 #include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
 
 /**********************************************************************/
 
@@ -69,12 +70,72 @@ static inline void ipi_flush_bp_all(void *ignored)
 	local_flush_bp_all();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+static int erratum_a15_798181(void)
+{
+	unsigned int midr = read_cpuid_id();
+
+	/* Cortex-A15 r0p0..r3p2 affected */
+	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+		return 0;
+	return 1;
+}
+#else
+static int erratum_a15_798181(void)
+{
+	return 0;
+}
+#endif
+
+static void ipi_flush_tlb_a15_erratum(void *arg)
+{
+	dmb();
+}
+
+static void broadcast_tlb_a15_erratum(void)
+{
+	if (!erratum_a15_798181())
+		return;
+
+	dummy_flush_tlb_a15_erratum();
+	smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum,
+			       NULL, 1);
+}
+
+static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
+{
+	int cpu;
+	cpumask_t mask = { CPU_BITS_NONE };
+
+	if (!erratum_a15_798181())
+		return;
+
+	dummy_flush_tlb_a15_erratum();
+	for_each_online_cpu(cpu) {
+		if (cpu == smp_processor_id())
+			continue;
+		/*
+		 * We only need to send an IPI if the other CPUs are running
+		 * the same ASID as the one being invalidated. There is no
+		 * need for locking around the active_asids check since the
+		 * switch_mm() function has at least one dmb() (as required by
+		 * this workaround) in case a context switch happens on
+		 * another CPU after the condition below.
+		 */
+		if (atomic64_read(&mm->context.id) ==
+		    atomic64_read(&per_cpu(active_asids, cpu)))
+			cpumask_set_cpu(cpu, &mask);
+	}
+	smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
+}
+
 void flush_tlb_all(void)
 {
 	if (tlb_ops_need_broadcast())
 		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
 	else
 		local_flush_tlb_all();
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
@@ -83,6 +144,7 @@ void flush_tlb_mm(struct mm_struct *mm)
 		on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
 	else
 		local_flush_tlb_mm(mm);
+	broadcast_tlb_mm_a15_erratum(mm);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
@@ -95,6 +157,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 					&ta, 1);
 	} else
 		local_flush_tlb_page(vma, uaddr);
+	broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -105,6 +168,7 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
 	} else
 		local_flush_tlb_kernel_page(kaddr);
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
@@ -119,6 +183,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 					&ta, 1);
 	} else
 		local_flush_tlb_range(vma, start, end);
+	broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -130,6 +195,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
 	} else
 		local_flush_tlb_kernel_range(start, end);
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_bp_all(void)

arch/arm/kvm/vgic.c

@@ -883,8 +883,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
 			  lr, irq, vgic_cpu->vgic_lr[lr]);
 		BUG_ON(!test_bit(lr, vgic_cpu->lr_used));
 		vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT;
-
+		return true;
-		goto out;
 	}
 
 	/* Try to use another LR for this interrupt */
@@ -898,7 +897,6 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
 	vgic_cpu->vgic_irq_lr_map[irq] = lr;
 	set_bit(lr, vgic_cpu->lr_used);
 
-out:
 	if (!vgic_irq_is_edge(vcpu, irq))
 		vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI;
 
@@ -1018,21 +1016,6 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 
 	kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr);
 
-	/*
-	 * We do not need to take the distributor lock here, since the only
-	 * action we perform is clearing the irq_active_bit for an EOIed
-	 * level interrupt.  There is a potential race with
-	 * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we
-	 * check if the interrupt is already active. Two possibilities:
-	 *
-	 * - The queuing is occurring on the same vcpu: cannot happen,
-	 *   as we're already in the context of this vcpu, and
-	 *   executing the handler
-	 * - The interrupt has been migrated to another vcpu, and we
-	 *   ignore this interrupt for this run. Big deal. It is still
-	 *   pending though, and will get considered when this vcpu
-	 *   exits.
-	 */
 	if (vgic_cpu->vgic_misr & GICH_MISR_EOI) {
 		/*
 		 * Some level interrupts have been EOIed. Clear their
@@ -1054,6 +1037,13 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 			} else {
 				vgic_cpu_irq_clear(vcpu, irq);
 			}
+
+			/*
+			 * Despite being EOIed, the LR may not have
+			 * been marked as empty.
+			 */
+			set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr);
+			vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT;
 		}
 	}
 
@@ -1064,9 +1054,8 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 }
 
 /*
- * Sync back the VGIC state after a guest run. We do not really touch
+ * Sync back the VGIC state after a guest run. The distributor lock is
- * the distributor here (the irq_pending_on_cpu bit is safe to set),
+ * needed so we don't get preempted in the middle of the state processing.
- * so there is no need for taking its lock.
  */
 static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
@@ -1112,10 +1101,14 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
 
 void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
 	if (!irqchip_in_kernel(vcpu->kvm))
 		return;
 
+	spin_lock(&dist->lock);
 	__kvm_vgic_sync_hwstate(vcpu);
+	spin_unlock(&dist->lock);
 }
 
 int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)

arch/arm/lib/delay.c

@@ -58,7 +58,7 @@ static void __timer_delay(unsigned long cycles)
 static void __timer_const_udelay(unsigned long xloops)
 {
 	unsigned long long loops = xloops;
-	loops *= loops_per_jiffy;
+	loops *= arm_delay_ops.ticks_per_jiffy;
 	__timer_delay(loops >> UDELAY_SHIFT);
 }
 
@@ -73,11 +73,13 @@ void __init register_current_timer_delay(const struct delay_timer *timer)
 		pr_info("Switching to timer-based delay loop\n");
 		delay_timer			= timer;
 		lpj_fine			= timer->freq / HZ;
-		loops_per_jiffy			= lpj_fine;
+
+		/* cpufreq may scale loops_per_jiffy, so keep a private copy */
+		arm_delay_ops.ticks_per_jiffy	= lpj_fine;
 		arm_delay_ops.delay		= __timer_delay;
 		arm_delay_ops.const_udelay	= __timer_const_udelay;
 		arm_delay_ops.udelay		= __timer_udelay;
-		arm_delay_ops.const_clock	= true;
+
 		delay_calibrated		= true;
 	} else {
 		pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");

arch/arm/mach-cns3xxx/core.c

@@ -22,19 +22,9 @@
 
 static struct map_desc cns3xxx_io_desc[] __initdata = {
 	{
-		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
+		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
-		.length		= SZ_4K,
+		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,

arch/arm/mach-cns3xxx/include/mach/cns3xxx.h

@@ -94,10 +94,10 @@
 #define RTC_INTR_STS_OFFSET			0x34
 
 #define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
 
 #define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT			0xFB001000
 
 #define PM_CLK_GATE_OFFSET			0x00
 #define PM_SOFT_RST_OFFSET			0x04
@@ -109,7 +109,7 @@
 #define PM_PLL_HM_PD_OFFSET			0x1C
 
 #define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
 
 #define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
 #define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
@@ -130,7 +130,7 @@
 #define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
 
 #define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
 
 #define TIMER1_COUNTER_OFFSET			0x00
 #define TIMER1_AUTO_RELOAD_OFFSET		0x04
@@ -227,16 +227,16 @@
  * Testchip peripheral and fpga gic regions
  */
 #define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
 
 #define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
 
 #define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT		(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
 
 #define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
 
 #define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
 #define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000

arch/arm/mach-ep93xx/include/mach/uncompress.h

@@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 
 static inline void putc(int c)
 {
-	/* Transmit fifo not full?  */
+	int i;
-	while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
+
-		;
+	for (i = 0; i < 10000; i++) {
+		/* Transmit fifo not full? */
+		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
+			break;
+	}
 
 	__raw_writeb(c, PHYS_UART_DATA);
 }

arch/arm/mach-imx/Kconfig

@@ -65,6 +65,9 @@ config IRAM_ALLOC
 	bool
 	select GENERIC_ALLOCATOR
 
+config HAVE_IMX_ANATOP
+	bool
+
 config HAVE_IMX_GPC
 	bool
 
@@ -73,6 +76,7 @@ config HAVE_IMX_MMDC
 
 config HAVE_IMX_SRC
 	def_bool y if SMP
+	select ARCH_HAS_RESET_CONTROLLER
 
 config IMX_HAVE_IOMUX_V1
 	bool
@@ -83,24 +87,12 @@ config ARCH_MXC_IOMUX_V3
 config ARCH_MX1
 	bool
 
-config MACH_MX21
-	bool
-
 config ARCH_MX25
 	bool
 
 config MACH_MX27
 	bool
 
-config ARCH_MX5
-	bool
-
-config ARCH_MX51
-	bool
-
-config ARCH_MX53
-	bool
-
 config SOC_IMX1
 	bool
 	select ARCH_MX1
@@ -114,7 +106,6 @@ config SOC_IMX21
 	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
-	select MACH_MX21
 	select MXC_AVIC
 
 config SOC_IMX25
@@ -128,6 +119,8 @@ config SOC_IMX25
 
 config SOC_IMX27
 	bool
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
@@ -155,7 +148,7 @@ config SOC_IMX35
 config SOC_IMX5
 	bool
 	select ARCH_HAS_CPUFREQ
-	select ARCH_MX5
+	select ARCH_HAS_OPP
 	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
 	select CPU_V7
@@ -163,8 +156,6 @@ config SOC_IMX5
 
 config	SOC_IMX51
 	bool
-	select ARCH_MX5
-	select ARCH_MX51
 	select PINCTRL
 	select PINCTRL_IMX51
 	select SOC_IMX5
@@ -789,8 +780,6 @@ comment "Device tree only"
 
 config	SOC_IMX53
 	bool "i.MX53 support"
-	select ARCH_MX5
-	select ARCH_MX53
 	select HAVE_CAN_FLEXCAN if CAN
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select PINCTRL
@@ -801,7 +790,7 @@ config	SOC_IMX53
 	  This enables support for Freescale i.MX53 processor.
 
 config SOC_IMX6Q
-	bool "i.MX6 Quad support"
+	bool "i.MX6 Quad/DualLite support"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
@@ -813,6 +802,7 @@ config SOC_IMX6Q
 	select CPU_V7
 	select HAVE_ARM_SCU
 	select HAVE_CAN_FLEXCAN if CAN
+	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC

arch/arm/mach-imx/Makefile

@@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o clk.o
@@ -27,7 +27,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
 
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-y += cpuidle.o
@@ -92,6 +91,7 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
 
+obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o

arch/arm/mach-imx/Makefile.boot

@@ -1,35 +0,0 @@
-zreladdr-$(CONFIG_SOC_IMX1)	+= 0x08008000
-params_phys-$(CONFIG_SOC_IMX1)	:= 0x08000100
-initrd_phys-$(CONFIG_SOC_IMX1)	:= 0x08800000
-
-zreladdr-$(CONFIG_SOC_IMX21)	+= 0xC0008000
-params_phys-$(CONFIG_SOC_IMX21)	:= 0xC0000100
-initrd_phys-$(CONFIG_SOC_IMX21)	:= 0xC0800000
-
-zreladdr-$(CONFIG_SOC_IMX25)	+= 0x80008000
-params_phys-$(CONFIG_SOC_IMX25)	:= 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX25)	:= 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX27)	+= 0xA0008000
-params_phys-$(CONFIG_SOC_IMX27)	:= 0xA0000100
-initrd_phys-$(CONFIG_SOC_IMX27)	:= 0xA0800000
-
-zreladdr-$(CONFIG_SOC_IMX31)	+= 0x80008000
-params_phys-$(CONFIG_SOC_IMX31)	:= 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX31)	:= 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
-params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX51)	+= 0x90008000
-params_phys-$(CONFIG_SOC_IMX51)	:= 0x90000100
-initrd_phys-$(CONFIG_SOC_IMX51)	:= 0x90800000
-
-zreladdr-$(CONFIG_SOC_IMX53)	+= 0x70008000
-params_phys-$(CONFIG_SOC_IMX53)	:= 0x70000100
-initrd_phys-$(CONFIG_SOC_IMX53)	:= 0x70800000
-
-zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
-params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
-initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000

arch/arm/mach-imx/anatop.c

@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include "common.h"
+
+#define REG_SET		0x4
+#define REG_CLR		0x8
+
+#define ANADIG_REG_2P5		0x130
+#define ANADIG_REG_CORE		0x140
+#define ANADIG_ANA_MISC0	0x150
+#define ANADIG_USB1_CHRG_DETECT	0x1b0
+#define ANADIG_USB2_CHRG_DETECT	0x210
+#define ANADIG_DIGPROG		0x260
+
+#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG	0x40000
+#define BM_ANADIG_REG_CORE_FET_ODRIVE		0x20000000
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	0x1000
+#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B	0x80000
+#define BM_ANADIG_USB_CHRG_DETECT_EN_B		0x100000
+
+static struct regmap *anatop;
+
+static void imx_anatop_enable_weak2p5(bool enable)
+{
+	u32 reg, val;
+
+	regmap_read(anatop, ANADIG_ANA_MISC0, &val);
+
+	/* can only be enabled when stop_mode_config is clear. */
+	reg = ANADIG_REG_2P5;
+	reg += (enable && (val & BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) == 0) ?
+		REG_SET : REG_CLR;
+	regmap_write(anatop, reg, BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG);
+}
+
+static void imx_anatop_enable_fet_odrive(bool enable)
+{
+	regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR),
+		BM_ANADIG_REG_CORE_FET_ODRIVE);
+}
+
+void imx_anatop_pre_suspend(void)
+{
+	imx_anatop_enable_weak2p5(true);
+	imx_anatop_enable_fet_odrive(true);
+}
+
+void imx_anatop_post_resume(void)
+{
+	imx_anatop_enable_fet_odrive(false);
+	imx_anatop_enable_weak2p5(false);
+}
+
+void imx_anatop_usb_chrg_detect_disable(void)
+{
+	regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
+		BM_ANADIG_USB_CHRG_DETECT_EN_B
+		| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+	regmap_write(anatop, ANADIG_USB2_CHRG_DETECT,
+		BM_ANADIG_USB_CHRG_DETECT_EN_B |
+		BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+}
+
+u32 imx_anatop_get_digprog(void)
+{
+	struct device_node *np;
+	void __iomem *anatop_base;
+	static u32 digprog;
+
+	if (digprog)
+		return digprog;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+	anatop_base = of_iomap(np, 0);
+	WARN_ON(!anatop_base);
+	digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
+
+	return digprog;
+}
+
+void __init imx_anatop_init(void)
+{
+	anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+	if (IS_ERR(anatop)) {
+		pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
+		return;
+	}
+}

arch/arm/mach-imx/avic.c

@@ -54,8 +54,6 @@
 void __iomem *avic_base;
 static struct irq_domain *domain;
 
-static u32 avic_saved_mask_reg[2];
-
 #ifdef CONFIG_MXC_IRQ_PRIOR
 static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
 {
@@ -113,6 +111,8 @@ static struct mxc_extra_irq avic_extra_irq = {
 };
 
 #ifdef CONFIG_PM
+static u32 avic_saved_mask_reg[2];
+
 static void avic_irq_suspend(struct irq_data *d)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);

arch/arm/mach-imx/clk-imx27.c

@@ -278,8 +278,6 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
 	clk_register_clkdev(clk[cpu_div], "cpu", NULL);
 	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
-	clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
-	clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
 
 	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
 

arch/arm/mach-imx/clk-imx35.c

@@ -257,6 +257,7 @@ int __init mx35_clocks_init(void)
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+	clk_register_clkdev(clk[admux_gate], "audmux", NULL);
 
 	clk_prepare_enable(clk[spba_gate]);
 	clk_prepare_enable(clk[gpio1_gate]);
@@ -265,6 +266,7 @@ int __init mx35_clocks_init(void)
 	clk_prepare_enable(clk[iim_gate]);
 	clk_prepare_enable(clk[emi_gate]);
 	clk_prepare_enable(clk[max_gate]);
+	clk_prepare_enable(clk[iomuxc_gate]);
 
 	/*
 	 * SCC is needed to boot via mmc after a watchdog reset. The clock code

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -45,16 +45,40 @@ static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "
 static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
 static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
 static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
-static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
+static const char *mx51_tve_sel[] = { "tve_pred", "tve_ext_sel", };
 static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
+static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
 static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
 static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
+static const char *mx53_cko1_sel[] = {
+	"cpu_podf", "pll1_sw", "pll2_sw", "pll3_sw",
+	"emi_slow_podf", "pll4_sw", "nfc_podf", "dummy",
+	"di_pred", "dummy", "dummy", "ahb",
+	"ipg", "per_root", "ckil", "dummy",};
+static const char *mx53_cko2_sel[] = {
+	"dummy"/* dptc_core */, "dummy"/* dptc_perich */,
+	"dummy", "esdhc_a_podf",
+	"usboh3_podf", "dummy"/* wrck_clk_root */,
+	"ecspi_podf", "dummy"/* pll1_ref_clk */,
+	"esdhc_b_podf", "dummy"/* ddr_clk_root */,
+	"dummy"/* arm_axi_clk_root */, "dummy"/* usb_phy_out */,
+	"vpu_sel", "ipu_sel",
+	"osc", "ckih1",
+	"dummy", "esdhc_c_sel",
+	"ssi1_root_podf", "ssi2_root_podf",
+	"dummy", "dummy",
+	"dummy"/* lpsr_clk_root */, "dummy"/* pgc_clk_root */,
+	"dummy"/* tve_out */, "usb_phy_sel",
+	"tve_sel", "lp_apm",
+	"uart_root", "dummy"/* spdif0_clk_root */,
+	"dummy", "dummy", };
 
 enum imx5_clks {
 	dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
 	uart_root, esdhc_a_pred, esdhc_b_pred, esdhc_c_s, esdhc_d_s,
 	emi_sel, emi_slow_podf, nfc_podf, ecspi_pred, ecspi_podf, usboh3_pred,
-	usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di,
+	usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di_unused,
 	tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate,
 	uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate,
 	gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate,
@@ -83,7 +107,10 @@ enum imx5_clks {
 	ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
 	epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
 	can_sel, can1_serial_gate, can1_ipg_gate,
-	owire_gate,
+	owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate,
+	cko1_sel, cko1_podf, cko1,
+	cko2_sel, cko2_podf, cko2,
+	srtc_gate, pata_gate,
 	clk_max
 };
 
@@ -160,8 +187,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 				usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
 	clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
 	clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
-	clk[tve_di] = imx_clk_fixed("tve_di", 65000000); /* FIXME */
-	clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, tve_sel, ARRAY_SIZE(tve_sel));
 	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
 	clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
 	clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
@@ -200,6 +225,11 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk[nfc_gate] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20);
 	clk[ipu_di0_gate] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10);
 	clk[ipu_di1_gate] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12);
+	clk[gpu3d_s] = imx_clk_mux("gpu3d_sel", MXC_CCM_CBCMR, 4, 2, gpu3d_sel, ARRAY_SIZE(gpu3d_sel));
+	clk[gpu2d_s] = imx_clk_mux("gpu2d_sel", MXC_CCM_CBCMR, 16, 2, gpu2d_sel, ARRAY_SIZE(gpu2d_sel));
+	clk[gpu3d_gate] = imx_clk_gate2("gpu3d_gate", "gpu3d_sel", MXC_CCM_CCGR5, 2);
+	clk[garb_gate] = imx_clk_gate2("garb_gate", "axi_a", MXC_CCM_CCGR5, 4);
+	clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "gpu2d_sel", MXC_CCM_CCGR6, 14);
 	clk[vpu_s] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel));
 	clk[vpu_gate] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6);
 	clk[vpu_reference_gate] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8);
@@ -235,6 +265,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
 	clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
 	clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
+	clk[srtc_gate] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28);
+	clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
@@ -286,7 +318,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
 	clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
-	clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
 	clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
 	clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
 	clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0");
@@ -331,8 +362,10 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
 	clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
 				mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
-	clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+	clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
-				mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel));
+				mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT);
+	clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1,
+				mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel));
 	clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
 	clk[tve_pred] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
 	clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
@@ -423,23 +456,23 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
 	clk[pll4_sw] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
 
-	clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
-				mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel));
 	clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
-	clk[ldb_di1_div] = imx_clk_divider("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1);
+	clk[ldb_di1_div] = imx_clk_divider_flags("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1, 0);
+	clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
+				mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel), CLK_SET_RATE_PARENT);
 	clk[di_pll4_podf] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3);
-	clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
-				mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel));
 	clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
-	clk[ldb_di0_div] = imx_clk_divider("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1);
+	clk[ldb_di0_div] = imx_clk_divider_flags("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1, 0);
+	clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
+				mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
 	clk[ldb_di0_gate] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
 	clk[ldb_di1_gate] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
 	clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
 				mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
 	clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
 				mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
-	clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+	clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
-				mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel));
+				mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
 	clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
 	clk[tve_pred] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
 	clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
@@ -456,6 +489,16 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
 	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
 
+	clk[cko1_sel] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4,
+				mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel));
+	clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3);
+	clk[cko1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7);
+
+	clk[cko2_sel] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5,
+				mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel));
+	clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
+	clk[cko2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
+
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
 			pr_err("i.MX53 clk %d: register failed with %ld\n",

arch/arm/mach-imx/clk-imx6q.c

@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of.h>
@@ -22,6 +23,12 @@
 
 #include "clk.h"
 #include "common.h"
+#include "hardware.h"
+
+#define CCR				0x0
+#define BM_CCR_WB_COUNT			(0x7 << 16)
+#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
+#define BM_CCR_RBC_EN			(0x1 << 27)
 
 #define CCGR0				0x68
 #define CCGR1				0x6c
@@ -67,6 +74,67 @@ void imx6q_set_chicken_bit(void)
 	writel_relaxed(val, ccm_base + CGPR);
 }
 
+static void imx6q_enable_rbc(bool enable)
+{
+	u32 val;
+	static bool last_rbc_mode;
+
+	if (last_rbc_mode == enable)
+		return;
+	/*
+	 * need to mask all interrupts in GPC before
+	 * operating RBC configurations
+	 */
+	imx_gpc_mask_all();
+
+	/* configure RBC enable bit */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_EN;
+	val |= enable ? BM_CCR_RBC_EN : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	/* configure RBC count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_BYPASS_COUNT;
+	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
+	writel(val, ccm_base + CCR);
+
+	/*
+	 * need to delay at least 2 cycles of CKIL(32K)
+	 * due to hardware design requirement, which is
+	 * ~61us, here we use 65us for safe
+	 */
+	udelay(65);
+
+	/* restore GPC interrupt mask settings */
+	imx_gpc_restore_all();
+
+	last_rbc_mode = enable;
+}
+
+static void imx6q_enable_wb(bool enable)
+{
+	u32 val;
+	static bool last_wb_mode;
+
+	if (last_wb_mode == enable)
+		return;
+
+	/* configure well bias enable bit */
+	val = readl_relaxed(ccm_base + CLPCR);
+	val &= ~BM_CLPCR_WB_PER_AT_LPM;
+	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
+	writel_relaxed(val, ccm_base + CLPCR);
+
+	/* configure well bias count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_WB_COUNT;
+	val |= enable ? BM_CCR_WB_COUNT : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	last_wb_mode = enable;
+}
+
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 {
 	u32 val = readl_relaxed(ccm_base + CLPCR);
@@ -74,6 +142,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 	val &= ~BM_CLPCR_LPM;
 	switch (mode) {
 	case WAIT_CLOCKED:
+		imx6q_enable_wb(false);
+		imx6q_enable_rbc(false);
 		break;
 	case WAIT_UNCLOCKED:
 		val |= 0x1 << BP_CLPCR_LPM;
@@ -92,6 +162,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
+		imx6q_enable_wb(true);
+		imx6q_enable_rbc(true);
 		break;
 	default:
 		return -EINVAL;
@@ -109,29 +181,29 @@ static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", };
 static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
 static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
 static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
-static const char *audio_sels[]	= { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *audio_sels[]	= { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
 static const char *gpu_axi_sels[]	= { "axi", "ahb", };
 static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
 static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
 static const char *ipu_sels[]		= { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
-static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
 static const char *ipu1_di0_sels[]	= { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *ipu1_di1_sels[]	= { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *ipu2_di0_sels[]	= { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *ipu2_di1_sels[]	= { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *hsi_tx_sels[]	= { "pll3_120m", "pll2_pfd2_396m", };
 static const char *pcie_axi_sels[]	= { "axi", "ahb", };
-static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", };
+static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
 static const char *usdhc_sels[]	= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *enfc_sels[]	= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
 static const char *emi_sels[]		= { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *vdo_axi_sels[]	= { "axi", "ahb", };
 static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
-static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video",
+static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
 				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
-				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
+				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
 
 enum mx6q_clks {
 	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@@ -165,7 +237,7 @@ enum mx6q_clks {
 	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
-	usbphy2_gate, clk_max
+	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -182,6 +254,21 @@ static struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 3, .div = 4, },
 };
 
+static struct clk_div_table post_div_table[] = {
+	{ .val = 2, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 0, .div = 4, },
+	{ }
+};
+
+static struct clk_div_table video_div_table[] = {
+	{ .val = 0, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 2, .div = 1, },
+	{ .val = 3, .div = 4, },
+	{ }
+};
+
 int __init mx6q_clocks_init(void)
 {
 	struct device_node *np;
@@ -208,6 +295,14 @@ int __init mx6q_clocks_init(void)
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 
+	/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
+	if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
+		post_div_table[1].div = 1;
+		post_div_table[2].div = 1;
+		video_div_table[1].div = 1;
+		video_div_table[2].div = 1;
+	};
+
 	/*                   type                               name         parent_name  base     div_mask */
 	clk[pll1_sys]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x7f);
 	clk[pll2_bus]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x1);
@@ -260,6 +355,10 @@ int __init mx6q_clocks_init(void)
 	clk[pll3_60m]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 8);
 	clk[twd]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
 
+	clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
@@ -283,8 +382,8 @@ int __init mx6q_clocks_init(void)
 	clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8,  2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
 	clk[ipu1_sel]         = imx_clk_mux("ipu1_sel",         base + 0x3c, 9,  2, ipu_sels,          ARRAY_SIZE(ipu_sels));
 	clk[ipu2_sel]         = imx_clk_mux("ipu2_sel",         base + 0x3c, 14, 2, ipu_sels,          ARRAY_SIZE(ipu_sels));
-	clk[ldb_di0_sel]      = imx_clk_mux("ldb_di0_sel",      base + 0x2c, 9,  3, ldb_di_sels,       ARRAY_SIZE(ldb_di_sels));
+	clk[ldb_di0_sel]      = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
-	clk[ldb_di1_sel]      = imx_clk_mux("ldb_di1_sel",      base + 0x2c, 12, 3, ldb_di_sels,       ARRAY_SIZE(ldb_di_sels));
+	clk[ldb_di1_sel]      = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
 	clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
 	clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
 	clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
@@ -332,9 +431,9 @@ int __init mx6q_clocks_init(void)
 	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
 	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
 	clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
-	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_div_3_5",       base + 0x20, 10, 1);
+	clk[ldb_di0_podf]     = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
 	clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
-	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_div_3_5",   base + 0x20, 11, 1);
+	clk[ldb_di1_podf]     = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
 	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
 	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
 	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
@@ -443,12 +542,16 @@ int __init mx6q_clocks_init(void)
 
 	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[twd], NULL, "smp_twd");
 	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
 	clk_register_clkdev(clk[arm], NULL, "cpu0");
 
+	if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
+		clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
+		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
+	}
+
 	/*
 	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
 	 * We can not get the 100MHz from the pll2_pfd0_352m.

arch/arm/mach-imx/clk.h

@@ -59,6 +59,14 @@ static inline struct clk *imx_clk_divider(const char *name, const char *parent,
 			reg, shift, width, 0, &imx_ccm_lock);
 }
 
+static inline struct clk *imx_clk_divider_flags(const char *name,
+		const char *parent, void __iomem *reg, u8 shift, u8 width,
+		unsigned long flags)
+{
+	return clk_register_divider(NULL, name, parent, flags,
+			reg, shift, width, 0, &imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_gate(const char *name, const char *parent,
 		void __iomem *reg, u8 shift)
 {
@@ -73,6 +81,15 @@ static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
 			width, 0, &imx_ccm_lock);
 }
 
+static inline struct clk *imx_clk_mux_flags(const char *name,
+		void __iomem *reg, u8 shift, u8 width, const char **parents,
+		int num_parents, unsigned long flags)
+{
+	return clk_register_mux(NULL, name, parents, num_parents,
+			flags, reg, shift, width, 0,
+			&imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_fixed_factor(const char *name,
 		const char *parent, unsigned int mult, unsigned int div)
 {

arch/arm/mach-imx/common.h

@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
 /*
@@ -74,6 +74,7 @@ extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_restart(char, const char *);
 extern void mxc_arch_reset_init(void __iomem *);
 extern int mx53_revision(void);
+extern int imx6q_revision(void);
 extern int mx53_display_revision(void);
 extern void imx_set_aips(void __iomem *);
 extern int mxc_device_init(void);
@@ -110,8 +111,9 @@ void tzic_handle_irq(struct pt_regs *);
 
 extern void imx_enable_cpu(int cpu, bool enable);
 extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
 extern void v7_cpu_resume(void);
-extern u32 *pl310_get_save_ptr(void);
 #ifdef CONFIG_SMP
 extern void v7_secondary_startup(void);
 extern void imx_scu_map_io(void);
@@ -122,13 +124,18 @@ static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
 static inline void imx_scu_standby_enable(void) {}
 #endif
-extern void imx_enable_cpu(int cpu, bool enable);
-extern void imx_set_cpu_jump(int cpu, void *jump_addr);
 extern void imx_src_init(void);
 extern void imx_src_prepare_restart(void);
 extern void imx_gpc_init(void);
 extern void imx_gpc_pre_suspend(void);
 extern void imx_gpc_post_resume(void);
+extern void imx_gpc_mask_all(void);
+extern void imx_gpc_restore_all(void);
+extern void imx_anatop_init(void);
+extern void imx_anatop_pre_suspend(void);
+extern void imx_anatop_post_resume(void);
+extern void imx_anatop_usb_chrg_detect_disable(void);
+extern u32 imx_anatop_get_digprog(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_set_chicken_bit(void);
 

arch/arm/mach-imx/cpu_op-mx51.c

@@ -1,31 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/bug.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include "hardware.h"
-
-static struct cpu_op mx51_cpu_op[] = {
-	{
-	.cpu_rate = 160000000,},
-	{
-	.cpu_rate = 800000000,},
-};
-
-struct cpu_op *mx51_get_cpu_op(int *op)
-{
-	*op = ARRAY_SIZE(mx51_cpu_op);
-	return mx51_cpu_op;
-}

arch/arm/mach-imx/cpu_op-mx51.h

@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-extern struct cpu_op *mx51_get_cpu_op(int *op);

arch/arm/mach-imx/cpufreq.c

@@ -1,206 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
- * The CPUFREQ driver is for controlling CPU frequency. It allows you to change
- * the CPU clock speed on the fly.
- */
-
-#include <linux/module.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include "hardware.h"
-
-#define CLK32_FREQ	32768
-#define NANOSECOND	(1000 * 1000 * 1000)
-
-struct cpu_op *(*get_cpu_op)(int *op);
-
-static int cpu_freq_khz_min;
-static int cpu_freq_khz_max;
-
-static struct clk *cpu_clk;
-static struct cpufreq_frequency_table *imx_freq_table;
-
-static int cpu_op_nr;
-static struct cpu_op *cpu_op_tbl;
-
-static int set_cpu_freq(int freq)
-{
-	int ret = 0;
-	int org_cpu_rate;
-
-	org_cpu_rate = clk_get_rate(cpu_clk);
-	if (org_cpu_rate == freq)
-		return ret;
-
-	ret = clk_set_rate(cpu_clk, freq);
-	if (ret != 0) {
-		printk(KERN_DEBUG "cannot set CPU clock rate\n");
-		return ret;
-	}
-
-	return ret;
-}
-
-static int mxc_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	return cpufreq_frequency_table_verify(policy, imx_freq_table);
-}
-
-static unsigned int mxc_get_speed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpu_clk) / 1000;
-}
-
-static int mxc_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq, unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	int freq_Hz;
-	int ret = 0;
-	unsigned int index;
-
-	cpufreq_frequency_table_target(policy, imx_freq_table,
-			target_freq, relation, &index);
-	freq_Hz = imx_freq_table[index].frequency * 1000;
-
-	freqs.old = clk_get_rate(cpu_clk) / 1000;
-	freqs.new = freq_Hz / 1000;
-	freqs.cpu = 0;
-	freqs.flags = 0;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	ret = set_cpu_freq(freq_Hz);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-static int mxc_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int ret;
-	int i;
-
-	printk(KERN_INFO "i.MXC CPU frequency driver\n");
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	if (!get_cpu_op)
-		return -EINVAL;
-
-	cpu_clk = clk_get(NULL, "cpu_clk");
-	if (IS_ERR(cpu_clk)) {
-		printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
-		return PTR_ERR(cpu_clk);
-	}
-
-	cpu_op_tbl = get_cpu_op(&cpu_op_nr);
-
-	cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
-	cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
-
-	imx_freq_table = kmalloc(
-		sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
-			GFP_KERNEL);
-	if (!imx_freq_table) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	for (i = 0; i < cpu_op_nr; i++) {
-		imx_freq_table[i].index = i;
-		imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
-
-		if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
-			cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
-
-		if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
-			cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
-	}
-
-	imx_freq_table[i].index = i;
-	imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	policy->cur = clk_get_rate(cpu_clk) / 1000;
-	policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
-	policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
-
-	/* Manual states, that PLL stabilizes in two CLK32 periods */
-	policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
-
-	ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
-
-	if (ret < 0) {
-		printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
-		       __func__, ret);
-		goto err;
-	}
-
-	cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
-	return 0;
-err:
-	kfree(imx_freq_table);
-err1:
-	clk_put(cpu_clk);
-	return ret;
-}
-
-static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-
-	set_cpu_freq(cpu_freq_khz_max * 1000);
-	clk_put(cpu_clk);
-	kfree(imx_freq_table);
-	return 0;
-}
-
-static struct cpufreq_driver mxc_driver = {
-	.flags = CPUFREQ_STICKY,
-	.verify = mxc_verify_speed,
-	.target = mxc_set_target,
-	.get = mxc_get_speed,
-	.init = mxc_cpufreq_init,
-	.exit = mxc_cpufreq_exit,
-	.name = "imx",
-};
-
-static int mxc_cpufreq_driver_init(void)
-{
-	return cpufreq_register_driver(&mxc_driver);
-}
-
-static void mxc_cpufreq_driver_exit(void)
-{
-	cpufreq_unregister_driver(&mxc_driver);
-}
-
-module_init(mxc_cpufreq_driver_init);
-module_exit(mxc_cpufreq_driver_exit);
-
-MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
-MODULE_DESCRIPTION("CPUfreq driver for i.MX");
-MODULE_LICENSE("GPL");

arch/arm/mach-imx/devices/Kconfig

@@ -86,7 +86,3 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 
 config IMX_HAVE_PLATFORM_SPI_IMX
 	bool
-
-config IMX_HAVE_PLATFORM_AHCI
-	bool
-	default y if ARCH_MX53

arch/arm/mach-imx/devices/Makefile

@@ -29,5 +29,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o

arch/arm/mach-imx/devices/devices-common.h

@@ -344,13 +344,3 @@ struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
 					int irq, int irq_err);
 struct platform_device *imx_add_imx_sdma(char *name,
 	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
-
-#include <linux/ahci_platform.h>
-struct imx_ahci_imx_data {
-	const char *devid;
-	resource_size_t iobase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_ahci_imx(
-		const struct imx_ahci_imx_data *data,
-		const struct ahci_platform_data *pdata);

arch/arm/mach-imx/devices/platform-ahci-imx.c

@@ -1,157 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_ahci_imx_data_entry_single(soc, _devid)		\
-	{								\
-		.devid = _devid,					\
-		.iobase = soc ## _SATA_BASE_ADDR,			\
-		.irq = soc ## _INT_SATA,				\
-	}
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
-	imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
-#endif
-
-enum {
-	HOST_CAP = 0x00,
-	HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
-	HOST_PORTS_IMPL	= 0x0c,
-	HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
-};
-
-static struct clk *sata_clk, *sata_ref_clk;
-
-/* AHCI module Initialization, if return 0, initialization is successful. */
-static int imx_sata_init(struct device *dev, void __iomem *addr)
-{
-	u32 tmpdata;
-	int ret = 0;
-	struct clk *clk;
-
-	sata_clk = clk_get(dev, "ahci");
-	if (IS_ERR(sata_clk)) {
-		dev_err(dev, "no sata clock.\n");
-		return PTR_ERR(sata_clk);
-	}
-	ret = clk_prepare_enable(sata_clk);
-	if (ret) {
-		dev_err(dev, "can't prepare/enable sata clock.\n");
-		goto put_sata_clk;
-	}
-
-	/* Get the AHCI SATA PHY CLK */
-	sata_ref_clk = clk_get(dev, "ahci_phy");
-	if (IS_ERR(sata_ref_clk)) {
-		dev_err(dev, "no sata ref clock.\n");
-		ret = PTR_ERR(sata_ref_clk);
-		goto release_sata_clk;
-	}
-	ret = clk_prepare_enable(sata_ref_clk);
-	if (ret) {
-		dev_err(dev, "can't prepare/enable sata ref clock.\n");
-		goto put_sata_ref_clk;
-	}
-
-	/* Get the AHB clock rate, and configure the TIMER1MS reg later */
-	clk = clk_get(dev, "ahci_dma");
-	if (IS_ERR(clk)) {
-		dev_err(dev, "no dma clock.\n");
-		ret = PTR_ERR(clk);
-		goto release_sata_ref_clk;
-	}
-	tmpdata = clk_get_rate(clk) / 1000;
-	clk_put(clk);
-
-	writel(tmpdata, addr + HOST_TIMER1MS);
-
-	tmpdata = readl(addr + HOST_CAP);
-	if (!(tmpdata & HOST_CAP_SSS)) {
-		tmpdata |= HOST_CAP_SSS;
-		writel(tmpdata, addr + HOST_CAP);
-	}
-
-	if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
-		writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
-			addr + HOST_PORTS_IMPL);
-
-	return 0;
-
-release_sata_ref_clk:
-	clk_disable_unprepare(sata_ref_clk);
-put_sata_ref_clk:
-	clk_put(sata_ref_clk);
-release_sata_clk:
-	clk_disable_unprepare(sata_clk);
-put_sata_clk:
-	clk_put(sata_clk);
-
-	return ret;
-}
-
-static void imx_sata_exit(struct device *dev)
-{
-	clk_disable_unprepare(sata_ref_clk);
-	clk_put(sata_ref_clk);
-
-	clk_disable_unprepare(sata_clk);
-	clk_put(sata_clk);
-
-}
-struct platform_device *__init imx_add_ahci_imx(
-		const struct imx_ahci_imx_data *data,
-		const struct ahci_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device_dmamask(data->devid, 0,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata),  DMA_BIT_MASK(32));
-}
-
-struct platform_device *__init imx53_add_ahci_imx(void)
-{
-	struct ahci_platform_data pdata = {
-		.init = imx_sata_init,
-		.exit = imx_sata_exit,
-	};
-
-	return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
-}

arch/arm/mach-imx/gpc.c

@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
@@ -68,6 +68,27 @@ static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
 	return 0;
 }
 
+void imx_gpc_mask_all(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	for (i = 0; i < IMR_NUM; i++) {
+		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+		writel_relaxed(~0, reg_imr1 + i * 4);
+	}
+
+}
+
+void imx_gpc_restore_all(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	for (i = 0; i < IMR_NUM; i++)
+		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
 static void imx_gpc_irq_unmask(struct irq_data *d)
 {
 	void __iomem *reg;

arch/arm/mach-imx/hardware.h

@@ -102,7 +102,6 @@
 
 #include "mxc.h"
 
-#include "mx6q.h"
 #include "mx51.h"
 #include "mx53.h"
 #include "mx3x.h"

arch/arm/mach-imx/hotplug.c

@@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
+	/*
+	 * We use the cpu jumping argument register to sync with
+	 * imx_cpu_kill() which is running on cpu0 and waiting for
+	 * the register being cleared to kill the cpu.
+	 */
+	imx_set_cpu_arg(cpu, ~0);
 	cpu_do_idle();
 }
 
 int imx_cpu_kill(unsigned int cpu)
 {
+	unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+	while (imx_get_cpu_arg(cpu) == 0)
+		if (time_after(jiffies, timeout))
+			return 0;
 	imx_enable_cpu(cpu, false);
+	imx_set_cpu_arg(cpu, 0);
 	return 1;
 }

arch/arm/mach-imx/mach-cpuimx51sd.c

@@ -33,7 +33,6 @@
 
 #include "common.h"
 #include "devices-imx51.h"
-#include "cpu_op-mx51.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx51.h"
@@ -285,10 +284,6 @@ static void __init eukrea_cpuimx51sd_init(void)
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
 					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
 
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-
 	imx51_add_imx_uart(0, &uart_pdata);
 	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
 	imx51_add_imx2_wdt(0);

arch/arm/mach-imx/mach-imx6q.c

@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
@@ -38,38 +38,32 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-#define IMX6Q_ANALOG_DIGPROG	0x260
+static u32 chip_revision;
 
-static int imx6q_revision(void)
+int imx6q_revision(void)
 {
-	struct device_node *np;
+	return chip_revision;
-	void __iomem *base;
+}
-	static u32 rev;
 
-	if (!rev) {
+static void __init imx6q_init_revision(void)
-		np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+{
-		if (!np)
+	u32 rev = imx_anatop_get_digprog();
-			return IMX_CHIP_REVISION_UNKNOWN;
-		base = of_iomap(np, 0);
-		if (!base) {
-			of_node_put(np);
-			return IMX_CHIP_REVISION_UNKNOWN;
-		}
-		rev =  readl_relaxed(base + IMX6Q_ANALOG_DIGPROG);
-		iounmap(base);
-		of_node_put(np);
-	}
 
 	switch (rev & 0xff) {
 	case 0:
-		return IMX_CHIP_REVISION_1_0;
+		chip_revision = IMX_CHIP_REVISION_1_0;
+		break;
 	case 1:
-		return IMX_CHIP_REVISION_1_1;
+		chip_revision = IMX_CHIP_REVISION_1_1;
+		break;
 	case 2:
-		return IMX_CHIP_REVISION_1_2;
+		chip_revision = IMX_CHIP_REVISION_1_2;
+		break;
 	default:
-		return IMX_CHIP_REVISION_UNKNOWN;
+		chip_revision = IMX_CHIP_REVISION_UNKNOWN;
 	}
+
+	mxc_set_cpu_type(rev >> 16 & 0xff);
 }
 
 void imx6q_restart(char mode, const char *cmd)
@@ -164,29 +158,7 @@ static void __init imx6q_1588_init(void)
 }
 static void __init imx6q_usb_init(void)
 {
-	struct regmap *anatop;
+	imx_anatop_usb_chrg_detect_disable();
-
-#define HW_ANADIG_USB1_CHRG_DETECT		0x000001b0
-#define HW_ANADIG_USB2_CHRG_DETECT		0x00000210
-
-#define BM_ANADIG_USB_CHRG_DETECT_EN_B		0x00100000
-#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B	0x00080000
-
-	anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
-	if (!IS_ERR(anatop)) {
-		/*
-		 * The external charger detector needs to be disabled,
-		 * or the signal at DP will be poor
-		 */
-		regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT,
-				BM_ANADIG_USB_CHRG_DETECT_EN_B
-				| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
-		regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT,
-				BM_ANADIG_USB_CHRG_DETECT_EN_B |
-				BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
-	} else {
-		pr_warn("failed to find fsl,imx6q-anatop regmap\n");
-	}
 }
 
 static void __init imx6q_init_machine(void)
@@ -196,6 +168,7 @@ static void __init imx6q_init_machine(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
+	imx_anatop_init();
 	imx6q_pm_init();
 	imx6q_usb_init();
 	imx6q_1588_init();
@@ -282,6 +255,7 @@ static void __init imx6q_map_io(void)
 
 static void __init imx6q_init_irq(void)
 {
+	imx6q_init_revision();
 	l2x0_of_init(0, ~0UL);
 	imx_src_init();
 	imx_gpc_init();
@@ -292,15 +266,17 @@ static void __init imx6q_timer_init(void)
 {
 	mx6q_clocks_init();
 	clocksource_of_init();
-	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
+	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+			      imx6q_revision());
 }
 
 static const char *imx6q_dt_compat[] __initdata = {
+	"fsl,imx6dl",
 	"fsl,imx6q",
 	NULL,
 };
 
-DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,

arch/arm/mach-imx/mach-mx51_babbage.c

@@ -27,7 +27,6 @@
 
 #include "common.h"
 #include "devices-imx51.h"
-#include "cpu_op-mx51.h"
 #include "hardware.h"
 #include "iomux-mx51.h"
 
@@ -371,9 +370,6 @@ static void __init mx51_babbage_init(void)
 
 	imx51_soc_init();
 
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
 	imx51_babbage_common_init();
 
 	imx51_add_imx_uart(0, &uart_pdata);

arch/arm/mach-imx/mm-imx1.c

@@ -51,6 +51,8 @@ void __init mx1_init_irq(void)
 
 void __init imx1_soc_init(void)
 {
+	mxc_device_init();
+
 	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
 						MX1_GPIO_INT_PORTA, 0);
 	mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,

arch/arm/mach-imx/mx6q.h

@@ -1,31 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_MX6Q_H__
-#define __MACH_MX6Q_H__
-
-#define MX6Q_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX6Q_IO_ADDRESS(x)		IOMEM(MX6Q_IO_P2V(x))
-
-/*
- * The following are the blocks that need to be statically mapped.
- * For other blocks, the base address really should be retrieved from
- * device tree.
- */
-#define MX6Q_SCU_BASE_ADDR		0x00a00000
-#define MX6Q_SCU_SIZE			0x1000
-#define MX6Q_CCM_BASE_ADDR		0x020c4000
-#define MX6Q_CCM_SIZE			0x4000
-#define MX6Q_ANATOP_BASE_ADDR		0x020c8000
-#define MX6Q_ANATOP_SIZE		0x1000
-
-#endif	/* __MACH_MX6Q_H__ */

arch/arm/mach-imx/mxc.h

@@ -34,6 +34,8 @@
 #define MXC_CPU_MX35		35
 #define MXC_CPU_MX51		51
 #define MXC_CPU_MX53		53
+#define MXC_CPU_IMX6DL		0x61
+#define MXC_CPU_IMX6Q		0x63
 
 #define IMX_CHIP_REVISION_1_0		0x10
 #define IMX_CHIP_REVISION_1_1		0x11
@@ -150,6 +152,15 @@ extern unsigned int __mxc_cpu_type;
 #endif
 
 #ifndef __ASSEMBLY__
+static inline bool cpu_is_imx6dl(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6DL;
+}
+
+static inline bool cpu_is_imx6q(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6Q;
+}
 
 struct cpu_op {
 	u32 cpu_rate;

arch/arm/mach-imx/platsmp.c

@@ -68,8 +68,8 @@ static void __init imx_smp_init_cpus(void)
 
 	ncores = scu_get_core_count(scu_base);
 
-	for (i = 0; i < ncores; i++)
+	for (i = ncores; i < NR_CPUS; i++)
-		set_cpu_possible(i, true);
+		set_cpu_possible(i, false);
 }
 
 void imx_smp_prepare(void)

arch/arm/mach-imx/pm-imx6q.c

@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
@@ -34,10 +34,12 @@ static int imx6q_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		imx6q_set_lpm(STOP_POWER_OFF);
 		imx_gpc_pre_suspend();
+		imx_anatop_pre_suspend();
 		imx_set_cpu_jump(0, v7_cpu_resume);
 		/* Zzz ... */
 		cpu_suspend(0, imx6q_suspend_finish);
 		imx_smp_prepare();
+		imx_anatop_post_resume();
 		imx_gpc_post_resume();
 		imx6q_set_lpm(WAIT_CLOCKED);
 		break;

arch/arm/mach-imx/src.c

@@ -14,16 +14,72 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/reset-controller.h>
 #include <linux/smp.h>
 #include <asm/smp_plat.h>
 
 #define SRC_SCR				0x000
 #define SRC_GPR1			0x020
 #define BP_SRC_SCR_WARM_RESET_ENABLE	0
+#define BP_SRC_SCR_SW_GPU_RST		1
+#define BP_SRC_SCR_SW_VPU_RST		2
+#define BP_SRC_SCR_SW_IPU1_RST		3
+#define BP_SRC_SCR_SW_OPEN_VG_RST	4
+#define BP_SRC_SCR_SW_IPU2_RST		12
 #define BP_SRC_SCR_CORE1_RST		14
 #define BP_SRC_SCR_CORE1_ENABLE		22
 
 static void __iomem *src_base;
+static DEFINE_SPINLOCK(scr_lock);
+
+static const int sw_reset_bits[5] = {
+	BP_SRC_SCR_SW_GPU_RST,
+	BP_SRC_SCR_SW_VPU_RST,
+	BP_SRC_SCR_SW_IPU1_RST,
+	BP_SRC_SCR_SW_OPEN_VG_RST,
+	BP_SRC_SCR_SW_IPU2_RST
+};
+
+static int imx_src_reset_module(struct reset_controller_dev *rcdev,
+		unsigned long sw_reset_idx)
+{
+	unsigned long timeout;
+	unsigned long flags;
+	int bit;
+	u32 val;
+
+	if (!src_base)
+		return -ENODEV;
+
+	if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
+		return -EINVAL;
+
+	bit = 1 << sw_reset_bits[sw_reset_idx];
+
+	spin_lock_irqsave(&scr_lock, flags);
+	val = readl_relaxed(src_base + SRC_SCR);
+	val |= bit;
+	writel_relaxed(val, src_base + SRC_SCR);
+	spin_unlock_irqrestore(&scr_lock, flags);
+
+	timeout = jiffies + msecs_to_jiffies(1000);
+	while (readl(src_base + SRC_SCR) & bit) {
+		if (time_after(jiffies, timeout))
+			return -ETIME;
+		cpu_relax();
+	}
+
+	return 0;
+}
+
+static struct reset_control_ops imx_src_ops = {
+	.reset = imx_src_reset_module,
+};
+
+static struct reset_controller_dev imx_reset_controller = {
+	.ops = &imx_src_ops,
+	.nr_resets = ARRAY_SIZE(sw_reset_bits),
+};
 
 void imx_enable_cpu(int cpu, bool enable)
 {
@@ -31,9 +87,11 @@ void imx_enable_cpu(int cpu, bool enable)
 
 	cpu = cpu_logical_map(cpu);
 	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+	spin_lock(&scr_lock);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val = enable ? val | mask : val & ~mask;
 	writel_relaxed(val, src_base + SRC_SCR);
+	spin_unlock(&scr_lock);
 }
 
 void imx_set_cpu_jump(int cpu, void *jump_addr)
@@ -43,14 +101,28 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
 		       src_base + SRC_GPR1 + cpu * 8);
 }
 
+u32 imx_get_cpu_arg(int cpu)
+{
+	cpu = cpu_logical_map(cpu);
+	return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+	cpu = cpu_logical_map(cpu);
+	writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
 void imx_src_prepare_restart(void)
 {
 	u32 val;
 
 	/* clear enable bits of secondary cores */
+	spin_lock(&scr_lock);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
 	writel_relaxed(val, src_base + SRC_SCR);
+	spin_unlock(&scr_lock);
 
 	/* clear persistent entry register of primary core */
 	writel_relaxed(0, src_base + SRC_GPR1);
@@ -65,11 +137,16 @@ void __init imx_src_init(void)
 	src_base = of_iomap(np, 0);
 	WARN_ON(!src_base);
 
+	imx_reset_controller.of_node = np;
+	reset_controller_register(&imx_reset_controller);
+
 	/*
 	 * force warm reset sources to generate cold reset
 	 * for a more reliable restart
 	 */
+	spin_lock(&scr_lock);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE);
 	writel_relaxed(val, src_base + SRC_SCR);
+	spin_unlock(&scr_lock);
 }

arch/arm/mach-kirkwood/guruplug-setup.c

@@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = {
 
 static struct mvsdio_platform_data guruplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
+	.gpio_card_detect = -1,
+	.gpio_write_protect = -1,
 };
 
 static struct gpio_led guruplug_led_pins[] = {

arch/arm/mach-kirkwood/openrd-setup.c

@@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = {
 
 static struct mvsdio_platform_data openrd_mvsdio_data = {
 	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+	.gpio_write_protect = -1,
 };
 
 static unsigned int openrd_mpp_config[] __initdata = {

arch/arm/mach-kirkwood/rd88f6281-setup.c

@@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
 
 static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
 	.gpio_card_detect = 28,
+	.gpio_write_protect = -1,
 };
 
 static unsigned int rd88f6281_mpp_config[] __initdata = {

arch/arm/mach-msm/timer.c

@@ -62,7 +62,10 @@ static int msm_timer_set_next_event(unsigned long cycles,
 {
 	u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
 
-	writel_relaxed(0, event_base + TIMER_CLEAR);
+	ctrl &= ~TIMER_ENABLE_EN;
+	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+	writel_relaxed(ctrl, event_base + TIMER_CLEAR);
 	writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
 	writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
 	return 0;

arch/arm/mach-mvebu/irq-armada-370-xp.c

@@ -44,6 +44,8 @@
 
 #define ARMADA_370_XP_MAX_PER_CPU_IRQS		(28)
 
+#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ	(5)
+
 #define ACTIVE_DOORBELLS			(8)
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -62,7 +64,7 @@ static void armada_370_xp_irq_mask(struct irq_data *d)
 #ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
 	else
@@ -79,7 +81,7 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
 #ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	else
@@ -147,7 +149,7 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 	writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	irq_set_status_flags(virq, IRQ_LEVEL);
 
-	if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+	if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
 		irq_set_percpu_devid(virq);
 		irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
 					handle_percpu_devid_irq);

arch/arm/mach-omap1/clock_data.c

@@ -538,15 +538,6 @@ static struct clk usb_hhc_ck16xx = {
 };
 
 static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
 	.name		= "usb_dc_ck",
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
@@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX | CK_7XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck7xx,	CK_7XX),
 	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
 	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),

arch/arm/mach-omap2/cclock44xx_data.c

@@ -52,6 +52,13 @@
  */
 #define OMAP4_DPLL_ABE_DEFFREQ				98304000
 
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ				960000000
+
 /* Root clocks */
 
 DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
 		    OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
 		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
 
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+		OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+		OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
 DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
 		OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
 		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@@ -1538,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"per_mcbsp4_gfclk",			&per_mcbsp4_gfclk,	CK_443X),
 	CLK(NULL,	"hsmmc1_fclk",			&hsmmc1_fclk,	CK_443X),
 	CLK(NULL,	"hsmmc2_fclk",			&hsmmc2_fclk,	CK_443X),
+	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m,	CK_443X),
 	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck,	CK_443X),
 	CLK(NULL,	"slimbus1_fclk_1",		&slimbus1_fclk_1,	CK_443X),
 	CLK(NULL,	"slimbus1_fclk_0",		&slimbus1_fclk_0,	CK_443X),
@@ -1705,5 +1717,13 @@ int __init omap4xxx_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
 	return 0;
 }

arch/arm/mach-omap2/common.h

@@ -293,5 +293,8 @@ extern void omap_reserve(void);
 struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
 
+/* SoC specific clock initializer */
+extern int (*omap_clk_init)(void);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

arch/arm/mach-omap2/io.c

@@ -54,6 +54,12 @@
 #include "prm3xxx.h"
 #include "prm44xx.h"
 
+/*
+ * omap_clk_init: points to a function that does the SoC-specific
+ * clock initializations
+ */
+int (*omap_clk_init)(void);
+
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -397,7 +403,7 @@ void __init omap2420_init_early(void)
 	omap242x_clockdomains_init();
 	omap2420_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap2420_clk_init();
+	omap_clk_init = omap2420_clk_init;
 }
 
 void __init omap2420_init_late(void)
@@ -427,7 +433,7 @@ void __init omap2430_init_early(void)
 	omap243x_clockdomains_init();
 	omap2430_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap2430_clk_init();
+	omap_clk_init = omap2430_clk_init;
 }
 
 void __init omap2430_init_late(void)
@@ -462,7 +468,7 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
+	omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3430_init_early(void)
@@ -500,7 +506,7 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
+	omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -568,7 +574,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	am33xx_clk_init();
+	omap_clk_init = am33xx_clk_init;
 }
 #endif
 
@@ -593,7 +599,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap4xxx_clk_init();
+	omap_clk_init = omap4xxx_clk_init;
 }
 
 void __init omap4430_init_late(void)

arch/arm/mach-omap2/omap_hwmod.c

@@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+		if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		} else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
 			idlemode = HWMOD_IDLEMODE_NO;
 		} else {
 			if (sf & SYSC_HAS_ENAWAKEUP)
@@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+		if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+		    (oh->flags & HWMOD_FORCE_MSTANDBY)) {
 			idlemode = HWMOD_IDLEMODE_FORCE;
 		} else {
 			if (sf & SYSC_HAS_ENAWAKEUP)

arch/arm/mach-omap2/omap_hwmod.h

@@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm {
  *
  * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
  *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
- *     of standby, rather than relying on module smart-standby
+ *     out of standby, rather than relying on module smart-standby
  * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
  *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
  *     XXX Should be HWMOD_SETUP_NO_RESET
@@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm {
  *     correctly, or this is being abused to deal with some PM latency
  *     issues -- but we're currently suffering from a shortage of
  *     folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ *     is kept in force-standby mode. Failing to do so causes PM problems
+ *     with musb on OMAP3630 at least. Note that musb has a dedicated register
+ *     to control MSTANDBY signal when MIDLEMODE is set to force-standby.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_16BIT_REG				(1 << 8)
 #define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
 #define HWMOD_BLOCK_WFI				(1 << 10)
+#define HWMOD_FORCE_MSTANDBY			(1 << 11)
 
 /*
  * omap_hwmod._int_flags definitions

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
 	 * broken when autoidle is enabled
 	 * workaround is to disable the autoidle bit at module level.
+	 *
+	 * Enabling the device in any other MIDLEMODE setting but force-idle
+	 * causes core_pwrdm not enter idle states at least on OMAP3630.
+	 * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+	 * signal when MIDLEMODE is set to force-idle.
 	 */
 	.flags		= HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
-				| HWMOD_SWSUP_MSTANDBY,
+				| HWMOD_FORCE_MSTANDBY,
 };
 
 /* usb_otg_hs */

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
 	{ }
 };
 
+static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
+	{ .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
+};
+
 /* ocp2scp_usb_phy */
 static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 	.name		= "ocp2scp_usb_phy",
@@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 		},
 	},
 	.dev_attr	= ocp2scp_dev_attr,
+	.opt_clks	= ocp2scp_usb_phy_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
 };
 
 /*

arch/arm/mach-omap2/timer.c

@@ -547,6 +547,8 @@ static inline void __init realtime_counter_init(void)
 			       clksrc_nr, clksrc_src)			\
 void __init omap##name##_gptimer_timer_init(void)			\
 {									\
+	if (omap_clk_init)						\
+		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);	\
@@ -556,6 +558,8 @@ void __init omap##name##_gptimer_timer_init(void)			\
 				clksrc_nr, clksrc_src)			\
 void __init omap##name##_sync32k_timer_init(void)		\
 {									\
+	if (omap_clk_init)						\
+		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	/* Enable the use of clocksource="gp_timer" kernel parameter */	\

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 #endif
 
 struct mmci_platform_data mop500_sdi0_data = {
-	.ios_handler	= mop500_sdi0_ios_handler,
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA |

arch/arm/mach-ux500/board-mop500.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-nomadik.h>
@@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev)
 	regulator_put(prox_regulator);
 }
 
+void mop500_snowball_ethernet_clock_enable(void)
+{
+	struct clk *clk;
+
+	clk = clk_get_sys("fsmc", NULL);
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+}
+
 static struct cryp_platform_data u8500_cryp1_platform_data = {
 		.mem_to_engine = {
 				.dir = STEDMA40_MEM_TO_PERIPH,
@@ -683,6 +693,8 @@ static void __init snowball_init_machine(void)
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
+	mop500_snowball_ethernet_clock_enable();
+
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }

arch/arm/mach-ux500/board-mop500.h

@@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_audio_init(struct device *parent);
+void mop500_snowball_ethernet_clock_enable(void);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,

arch/arm/mach-ux500/cpu-db8500.c

@@ -312,9 +312,10 @@ static void __init u8500_init_machine(void)
 	/* Pinmaps must be in place before devices register */
 	if (of_machine_is_compatible("st-ericsson,mop500"))
 		mop500_pinmaps_init();
-	else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
 		snowball_pinmaps_init();
-	else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+		mop500_snowball_ethernet_clock_enable();
+	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
 		hrefv60_pinmaps_init();
 	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
 		/* TODO: Add pinmaps for ccu9540 board. */

arch/arm/mm/cache-l2x0.c

@@ -299,7 +299,7 @@ static void l2x0_unlock(u32 cache_id)
 	int lockregs;
 	int i;
 
-	switch (cache_id) {
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
 	case L2X0_CACHE_ID_PART_L310:
 		lockregs = 8;
 		break;
@@ -333,15 +333,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	if (cache_id_part_number_from_dt)
 		cache_id = cache_id_part_number_from_dt;
 	else
-		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
+		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
-			& L2X0_CACHE_ID_PART_MASK;
 	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
 
 	aux &= aux_mask;
 	aux |= aux_val;
 
 	/* Determine the number of ways */
-	switch (cache_id) {
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
 	case L2X0_CACHE_ID_PART_L310:
 		if (aux & (1 << 16))
 			ways = 16;
@@ -725,7 +724,6 @@ static const struct l2x0_of_data pl310_data = {
 		.flush_all   = l2x0_flush_all,
 		.inv_all     = l2x0_inv_all,
 		.disable     = l2x0_disable,
-		.set_debug   = pl310_set_debug,
 	},
 };
 
@@ -814,9 +812,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 		data->save();
 
 	of_init = true;
-	l2x0_init(l2x0_base, aux_val, aux_mask);
-
 	memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
+	l2x0_init(l2x0_base, aux_val, aux_mask);
 
 	return 0;
 }

arch/arm/mm/context.c

@@ -48,7 +48,7 @@ static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
 static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
 static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
 
-static DEFINE_PER_CPU(atomic64_t, active_asids);
+DEFINE_PER_CPU(atomic64_t, active_asids);
 static DEFINE_PER_CPU(u64, reserved_asids);
 static cpumask_t tlb_flush_pending;
 
@@ -215,6 +215,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
 		local_flush_bp_all();
 		local_flush_tlb_all();
+		dummy_flush_tlb_a15_erratum();
 	}
 
 	atomic64_set(&per_cpu(active_asids, cpu), asid);

arch/arm/mm/mmu.c

@@ -598,39 +598,60 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
 
-static void __init alloc_init_section(pud_t *pud, unsigned long addr,
+static void __init map_init_section(pmd_t *pmd, unsigned long addr,
+			unsigned long end, phys_addr_t phys,
+			const struct mem_type *type)
+{
+#ifndef CONFIG_ARM_LPAE
+	/*
+	 * In classic MMU format, puds and pmds are folded in to
+	 * the pgds. pmd_offset gives the PGD entry. PGDs refer to a
+	 * group of L1 entries making up one logical pointer to
+	 * an L2 table (2MB), where as PMDs refer to the individual
+	 * L1 entries (1MB). Hence increment to get the correct
+	 * offset for odd 1MB sections.
+	 * (See arch/arm/include/asm/pgtable-2level.h)
+	 */
+	if (addr & SECTION_SIZE)
+		pmd++;
+#endif
+	do {
+		*pmd = __pmd(phys | type->prot_sect);
+		phys += SECTION_SIZE;
+	} while (pmd++, addr += SECTION_SIZE, addr != end);
+
+	flush_pmd_entry(pmd);
+}
+
+static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 				      unsigned long end, phys_addr_t phys,
 				      const struct mem_type *type)
 {
 	pmd_t *pmd = pmd_offset(pud, addr);
+	unsigned long next;
 
-	/*
+	do {
-	 * Try a section mapping - end, addr and phys must all be aligned
-	 * to a section boundary.  Note that PMDs refer to the individual
-	 * L1 entries, whereas PGDs refer to a group of L1 entries making
-	 * up one logical pointer to an L2 table.
-	 */
-	if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
-		pmd_t *p = pmd;
-
-#ifndef CONFIG_ARM_LPAE
-		if (addr & SECTION_SIZE)
-			pmd++;
-#endif
-
-		do {
-			*pmd = __pmd(phys | type->prot_sect);
-			phys += SECTION_SIZE;
-		} while (pmd++, addr += SECTION_SIZE, addr != end);
-
-		flush_pmd_entry(p);
-	} else {
 		/*
-		 * No need to loop; pte's aren't interested in the
+		 * With LPAE, we must loop over to map
-		 * individual L1 entries.
+		 * all the pmds for the given range.
 		 */
-		alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
+		next = pmd_addr_end(addr, end);
-	}
+
+		/*
+		 * Try a section mapping - addr, next and phys must all be
+		 * aligned to a section boundary.
+		 */
+		if (type->prot_sect &&
+				((addr | next | phys) & ~SECTION_MASK) == 0) {
+			map_init_section(pmd, addr, next, phys, type);
+		} else {
+			alloc_init_pte(pmd, addr, next,
+						__phys_to_pfn(phys), type);
+		}
+
+		phys += next - addr;
+
+	} while (pmd++, addr = next, addr != end);
 }
 
 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
@@ -641,7 +662,7 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 
 	do {
 		next = pud_addr_end(addr, end);
-		alloc_init_section(pud, addr, next, phys, type);
+		alloc_init_pmd(pud, addr, next, phys, type);
 		phys += next - addr;
 	} while (pud++, addr = next, addr != end);
 }

arch/arm/mm/proc-v7.S

@@ -420,7 +420,7 @@ __v7_pj4b_proc_info:
 __v7_ca7mp_proc_info:
 	.long	0x410fc070
 	.long	0xff0ffff0
-	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+	__v7_proc __v7_ca7mp_setup
 	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
 
 	/*
@@ -430,9 +430,24 @@ __v7_ca7mp_proc_info:
 __v7_ca15mp_proc_info:
 	.long	0x410fc0f0
 	.long	0xff0ffff0
-	__v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
+	__v7_proc __v7_ca15mp_setup
 	.size	__v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
 
+	/*
+	 * Qualcomm Inc. Krait processors.
+	 */
+	.type	__krait_proc_info, #object
+__krait_proc_info:
+	.long	0x510f0400		@ Required ID value
+	.long	0xff0ffc00		@ Mask for ID
+	/*
+	 * Some Krait processors don't indicate support for SDIV and UDIV
+	 * instructions in the ARM instruction set, even though they actually
+	 * do support them.
+	 */
+	__v7_proc __v7_setup, hwcaps = HWCAP_IDIV
+	.size	__krait_proc_info, . - __krait_proc_info
+
 	/*
 	 * Match any ARMv7 processor core.
 	 */

arch/mips/Kconfig

@@ -18,7 +18,7 @@ config MIPS
 	select HAVE_KRETPROBES
 	select HAVE_DEBUG_KMEMLEAK
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
-	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
 	select RTC_LIB if !MACH_LOONGSON
 	select GENERIC_ATOMIC64 if !64BIT
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
@@ -657,7 +657,7 @@ config SNI_RM
 	bool "SNI RM200/300/400"
 	select FW_ARC if CPU_LITTLE_ENDIAN
 	select FW_ARC32 if CPU_LITTLE_ENDIAN
-	select SNIPROM if CPU_BIG_ENDIAN
+	select FW_SNIPROM if CPU_BIG_ENDIAN
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select CEVT_R4K
@@ -1144,7 +1144,7 @@ config DEFAULT_SGI_PARTITION
 config FW_ARC32
 	bool
 
-config SNIPROM
+config FW_SNIPROM
 	bool
 
 config BOOT_ELF32
@@ -1493,7 +1493,6 @@ config CPU_XLP
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
-	select CPU_HAS_LLSC
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
 	select CPU_HAS_PREFETCH

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -745,10 +745,7 @@ void __init board_prom_init(void)
 		strcpy(cfe_version, "unknown");
 	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
 
-	if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) {
+	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
-		printk(KERN_ERR PFX "invalid nvram checksum\n");
-		return;
-	}
 
 	board_name = bcm63xx_nvram_get_name();
 	/* find board by name */

arch/mips/bcm63xx/nvram.c

@@ -38,7 +38,7 @@ struct bcm963xx_nvram {
 static struct bcm963xx_nvram nvram;
 static int mac_addr_used;
 
-int __init bcm63xx_nvram_init(void *addr)
+void __init bcm63xx_nvram_init(void *addr)
 {
 	unsigned int check_len;
 	u32 crc, expected_crc;
@@ -60,9 +60,8 @@ int __init bcm63xx_nvram_init(void *addr)
 	crc = crc32_le(~0, (u8 *)&nvram, check_len);
 
 	if (crc != expected_crc)
-		return -EINVAL;
+		pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
-
+			expected_crc, crc);
-	return 0;
 }
 
 u8 *bcm63xx_nvram_get_name(void)

arch/mips/bcm63xx/setup.c

@@ -157,4 +157,4 @@ int __init bcm63xx_register_devices(void)
 	return board_register_devices();
 }
 
-device_initcall(bcm63xx_register_devices);
+arch_initcall(bcm63xx_register_devices);

arch/mips/cavium-octeon/setup.c

@@ -174,7 +174,10 @@ static int octeon_kexec_prepare(struct kimage *image)
 
 static void octeon_generic_shutdown(void)
 {
-	int cpu, i;
+	int i;
+#ifdef CONFIG_SMP
+	int cpu;
+#endif
 	struct cvmx_bootmem_desc *bootmem_desc;
 	void *named_block_array_ptr;
 

arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h

@@ -9,10 +9,8 @@
  *
  * Initialized the local nvram copy from the target address and checks
  * its checksum.
- *
- * Returns 0 on success.
  */
-int __init bcm63xx_nvram_init(void *nvram);
+void bcm63xx_nvram_init(void *nvram);
 
 /**
  * bcm63xx_nvram_get_name() - returns the board name according to nvram

arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h

@@ -28,11 +28,7 @@
 /* #define cpu_has_prefetch	? */
 #define cpu_has_mcheck		1
 /* #define cpu_has_ejtag	? */
-#ifdef CONFIG_CPU_HAS_LLSC
 #define cpu_has_llsc		1
-#else
-#define cpu_has_llsc		0
-#endif
 /* #define cpu_has_vtag_icache	? */
 /* #define cpu_has_dc_aliases	? */
 /* #define cpu_has_ic_fills_f_dc ? */

arch/mips/include/asm/mipsregs.h

@@ -1166,7 +1166,10 @@ do {									\
 	unsigned int __dspctl;						\
 									\
 	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
 	"	rddsp	%0, %x1					\n"	\
+	"	.set pop					\n"	\
 	: "=r" (__dspctl)						\
 	: "i" (mask));							\
 	__dspctl;							\
@@ -1175,30 +1178,198 @@ do {									\
 #define wrdsp(val, mask)						\
 do {									\
 	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
 	"	wrdsp	%0, %x1					\n"	\
+	"	.set pop					\n"	\
 	:								\
 	: "r" (val), "i" (mask));					\
 } while (0)
 
-#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
+#define mflo0()								\
-#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
+({									\
-#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
+	long mflo0;							\
-#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac0					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo0)); 						\
+	mflo0;								\
+})
 
-#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
+#define mflo1()								\
-#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
+({									\
-#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
+	long mflo1;							\
-#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac1					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo1)); 						\
+	mflo1;								\
+})
 
-#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
+#define mflo2()								\
-#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
+({									\
-#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
+	long mflo2;							\
-#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac2					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo2)); 						\
+	mflo2;								\
+})
 
-#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
+#define mflo3()								\
-#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
+({									\
-#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
+	long mflo3;							\
-#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac3					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo3)); 						\
+	mflo3;								\
+})
+
+#define mfhi0()								\
+({									\
+	long mfhi0;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac0					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi0)); 						\
+	mfhi0;								\
+})
+
+#define mfhi1()								\
+({									\
+	long mfhi1;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac1					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi1)); 						\
+	mfhi1;								\
+})
+
+#define mfhi2()								\
+({									\
+	long mfhi2;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac2					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi2)); 						\
+	mfhi2;								\
+})
+
+#define mfhi3()								\
+({									\
+	long mfhi3;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac3					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi3)); 						\
+	mfhi3;								\
+})
+
+
+#define mtlo0(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac0					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo1(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac1					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo2(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac2					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo3(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac3					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi0(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac0					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi1(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac1					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi2(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac2					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi3(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac3					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
 
 #else
 

arch/mips/include/asm/signal.h

@@ -21,6 +21,6 @@
 #include <asm/sigcontext.h>
 #include <asm/siginfo.h>
 
-#define __ARCH_HAS_ODD_SIGACTION
+#define __ARCH_HAS_IRIX_SIGACTION
 
 #endif /* _ASM_SIGNAL_H */