2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 07:04:00 +08:00

amd-xgbe: Simplify mailbox interface rate change code

Simplify and centralize the mailbox command rate change interface by
having a single function perform the writes to the mailbox registers
to issue the request.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Lendacky, Thomas 2017-06-28 13:41:32 -05:00 committed by David S. Miller
parent e3ef6983cc
commit 549b32af9f

View File

@ -1694,19 +1694,25 @@ static void xgbe_phy_set_redrv_mode(struct xgbe_prv_data *pdata)
xgbe_phy_put_comm_ownership(pdata);
}
static void xgbe_phy_start_ratechange(struct xgbe_prv_data *pdata)
static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
unsigned int cmd, unsigned int sub_cmd)
{
if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
return;
unsigned int s0 = 0;
unsigned int wait;
/* Log if a previous command did not complete */
netif_dbg(pdata, link, pdata->netdev,
"firmware mailbox not ready for command\n");
}
if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
netif_dbg(pdata, link, pdata->netdev,
"firmware mailbox not ready for command\n");
static void xgbe_phy_complete_ratechange(struct xgbe_prv_data *pdata)
{
unsigned int wait;
/* Construct the command */
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, cmd);
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, sub_cmd);
/* Issue the command */
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0);
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
/* Wait for command to complete */
wait = XGBE_RATECHANGE_COUNT;
@ -1723,21 +1729,8 @@ static void xgbe_phy_complete_ratechange(struct xgbe_prv_data *pdata)
static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)
{
unsigned int s0;
xgbe_phy_start_ratechange(pdata);
/* Receiver Reset Cycle */
s0 = 0;
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, 5);
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 0);
/* Call FW to make the change */
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0);
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
xgbe_phy_complete_ratechange(pdata);
xgbe_phy_perform_ratechange(pdata, 5, 0);
netif_dbg(pdata, link, pdata->netdev, "receiver reset complete\n");
}
@ -1746,14 +1739,8 @@ static void xgbe_phy_power_off(struct xgbe_prv_data *pdata)
{
struct xgbe_phy_data *phy_data = pdata->phy_data;
xgbe_phy_start_ratechange(pdata);
/* Call FW to make the change */
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, 0);
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
xgbe_phy_complete_ratechange(pdata);
/* Power off */
xgbe_phy_perform_ratechange(pdata, 0, 0);
phy_data->cur_mode = XGBE_MODE_UNKNOWN;
@ -1763,33 +1750,21 @@ static void xgbe_phy_power_off(struct xgbe_prv_data *pdata)
static void xgbe_phy_sfi_mode(struct xgbe_prv_data *pdata)
{
struct xgbe_phy_data *phy_data = pdata->phy_data;
unsigned int s0;
xgbe_phy_set_redrv_mode(pdata);
xgbe_phy_start_ratechange(pdata);
/* 10G/SFI */
s0 = 0;
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, 3);
if (phy_data->sfp_cable != XGBE_SFP_CABLE_PASSIVE) {
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 0);
xgbe_phy_perform_ratechange(pdata, 3, 0);
} else {
if (phy_data->sfp_cable_len <= 1)
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 1);
xgbe_phy_perform_ratechange(pdata, 3, 1);
else if (phy_data->sfp_cable_len <= 3)
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 2);
xgbe_phy_perform_ratechange(pdata, 3, 2);
else
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 3);
xgbe_phy_perform_ratechange(pdata, 3, 3);
}
/* Call FW to make the change */
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0);
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
xgbe_phy_complete_ratechange(pdata);
phy_data->cur_mode = XGBE_MODE_SFI;
netif_dbg(pdata, link, pdata->netdev, "10GbE SFI mode set\n");
@ -1798,23 +1773,11 @@ static void xgbe_phy_sfi_mode(struct xgbe_prv_data *pdata)
static void xgbe_phy_x_mode(struct xgbe_prv_data *pdata)
{
struct xgbe_phy_data *phy_data = pdata->phy_data;
unsigned int s0;
xgbe_phy_set_redrv_mode(pdata);
xgbe_phy_start_ratechange(pdata);
/* 1G/X */
s0 = 0;
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, 1);
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 3);
/* Call FW to make the change */
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0);
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
xgbe_phy_complete_ratechange(pdata);
xgbe_phy_perform_ratechange(pdata, 1, 3);
phy_data->cur_mode = XGBE_MODE_X;
@ -1824,23 +1787,11 @@ static void xgbe_phy_x_mode(struct xgbe_prv_data *pdata)
static void xgbe_phy_sgmii_1000_mode(struct xgbe_prv_data *pdata)
{
struct xgbe_phy_data *phy_data = pdata->phy_data;
unsigned int s0;
xgbe_phy_set_redrv_mode(pdata);
xgbe_phy_start_ratechange(pdata);
/* 1G/SGMII */
s0 = 0;
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, 1);
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 2);
/* Call FW to make the change */
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0);
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
xgbe_phy_complete_ratechange(pdata);
xgbe_phy_perform_ratechange(pdata, 1, 2);
phy_data->cur_mode = XGBE_MODE_SGMII_1000;
@ -1850,23 +1801,11 @@ static void xgbe_phy_sgmii_1000_mode(struct xgbe_prv_data *pdata)
static void xgbe_phy_sgmii_100_mode(struct xgbe_prv_data *pdata)
{
struct xgbe_phy_data *phy_data = pdata->phy_data;
unsigned int s0;
xgbe_phy_set_redrv_mode(pdata);
xgbe_phy_start_ratechange(pdata);
/* 1G/SGMII */
s0 = 0;
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, 1);
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 1);
/* Call FW to make the change */
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0);
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
xgbe_phy_complete_ratechange(pdata);
/* 100M/SGMII */
xgbe_phy_perform_ratechange(pdata, 1, 1);
phy_data->cur_mode = XGBE_MODE_SGMII_100;
@ -1876,23 +1815,11 @@ static void xgbe_phy_sgmii_100_mode(struct xgbe_prv_data *pdata)
static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata)
{
struct xgbe_phy_data *phy_data = pdata->phy_data;
unsigned int s0;
xgbe_phy_set_redrv_mode(pdata);
xgbe_phy_start_ratechange(pdata);
/* 10G/KR */
s0 = 0;
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, 4);
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 0);
/* Call FW to make the change */
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0);
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
xgbe_phy_complete_ratechange(pdata);
xgbe_phy_perform_ratechange(pdata, 4, 0);
phy_data->cur_mode = XGBE_MODE_KR;
@ -1902,23 +1829,11 @@ static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata)
static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata)
{
struct xgbe_phy_data *phy_data = pdata->phy_data;
unsigned int s0;
xgbe_phy_set_redrv_mode(pdata);
xgbe_phy_start_ratechange(pdata);
/* 2.5G/KX */
s0 = 0;
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, 2);
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 0);
/* Call FW to make the change */
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0);
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
xgbe_phy_complete_ratechange(pdata);
xgbe_phy_perform_ratechange(pdata, 2, 0);
phy_data->cur_mode = XGBE_MODE_KX_2500;
@ -1928,23 +1843,11 @@ static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata)
static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata)
{
struct xgbe_phy_data *phy_data = pdata->phy_data;
unsigned int s0;
xgbe_phy_set_redrv_mode(pdata);
xgbe_phy_start_ratechange(pdata);
/* 1G/KX */
s0 = 0;
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, 1);
XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, 3);
/* Call FW to make the change */
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0);
XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
xgbe_phy_complete_ratechange(pdata);
xgbe_phy_perform_ratechange(pdata, 1, 3);
phy_data->cur_mode = XGBE_MODE_KX_1000;