renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 18:23:53 +08:00
Code

ARM: S5P64X0: Use common uncompress.h part for plat-samsung

Browse Source 
Since uart_base can be set dynamically in arch_detect_cpu(), there is no
need to have a copy of all code locally, just to override UART base
address.

This patch removes any duplicate code in uncompress.h variant of s5p64x0
and implements proper arch_detect_cpu() function to initialize UART with
SoC-specific parameters.

While at it, replace hard-coded register address with macro.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Tomasz Figa 2013-06-19 02:22:22 +09:00 committed by Kukjin Kim
parent 76c1b8386b
commit 5336539ab8
1 changed files with 6 additions and 156 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

162
arch/arm/mach-s5p64x0/include/mach/uncompress.h
View File

@ -14,171 +14,21 @@
#define __ASM_ARCH_UNCOMPRESS_H
#include <mach/map.h>
#include <plat/uncompress.h>
/*
* cannot use commonly <plat/uncompress.h>
* because uart base of S5P6440 and S5P6450 is different
*/
typedef unsigned int upf_t; /* cannot include linux/serial_core.h */
/* uart setup */
unsigned int fifo_mask;
unsigned int fifo_max;
/* forward declerations */
static void arch_detect_cpu(void);
/* defines for UART registers */
#include <plat/regs-serial.h>
#include <plat/regs-watchdog.h>
/* working in physical space... */
#undef S3C2410_WDOGREG
#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
unsigned long uart_base;
static __inline__ void get_uart_base(void)
static void arch_detect_cpu(void)
{
unsigned int chipid;
chipid = *(const volatile unsigned int __force *) 0xE0100118;
uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT;
if ((chipid & 0xff000) == 0x50000)
uart_base += 0xEC800000;
uart_base = S5P6450_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
else
uart_base += 0xEC000000;
}
uart_base = S5P6440_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
static __inline__ void uart_wr(unsigned int reg, unsigned int val)
{
volatile unsigned int *ptr;
get_uart_base();
ptr = (volatile unsigned int *)(reg + uart_base);
*ptr = val;
}
static __inline__ unsigned int uart_rd(unsigned int reg)
{
volatile unsigned int *ptr;
get_uart_base();
ptr = (volatile unsigned int *)(reg + uart_base);
return *ptr;
}
/*
* we can deal with the case the UARTs are being run
* in FIFO mode, so that we don't hold up our execution
* waiting for tx to happen...
*/
static void putc(int ch)
{
if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
int level;
while (1) {
level = uart_rd(S3C2410_UFSTAT);
level &= fifo_mask;
if (level < fifo_max)
break;
}
} else {
/* not using fifos */
while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
barrier();
}
/* write byte to transmission register */
uart_wr(S3C2410_UTXH, ch);
}
static inline void flush(void)
{
}
#define __raw_writel(d, ad) \
do { \
*((volatile unsigned int __force *)(ad)) = (d); \
} while (0)
#ifdef CONFIG_S3C_BOOT_ERROR_RESET
static void arch_decomp_error(const char *x)
{
putstr("\n\n");
putstr(x);
putstr("\n\n -- System resetting\n");
__raw_writel(0x4000, S3C2410_WTDAT);
__raw_writel(0x4000, S3C2410_WTCNT);
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
while(1);
}
#define arch_error arch_decomp_error
#endif
#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
static inline void arch_enable_uart_fifo(void)
{
u32 fifocon = uart_rd(S3C2410_UFCON);
if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
fifocon |= S3C2410_UFCON_RESETBOTH;
uart_wr(S3C2410_UFCON, fifocon);
/* wait for fifo reset to complete */
while (1) {
fifocon = uart_rd(S3C2410_UFCON);
if (!(fifocon & S3C2410_UFCON_RESETBOTH))
break;
}
}
}
#else
#define arch_enable_uart_fifo() do { } while(0)
#endif
static void arch_decomp_setup(void)
{
/*
* we may need to setup the uart(s) here if we are not running
* on an BAST... the BAST will have left the uarts configured
* after calling linux.
*/
arch_detect_cpu();
/*
* Enable the UART FIFOs if they where not enabled and our
* configuration says we should turn them on.
*/
arch_enable_uart_fifo();
}
static void arch_detect_cpu(void)
{
/* we do not need to do any cpu detection here at the moment. */
fifo_mask = S3C2440_UFSTAT_TXMASK;
fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
}
#endif /* __ASM_ARCH_UNCOMPRESS_H */