mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-19 10:44:14 +08:00
mmc mxcmmc: do not depend on grouped clocks
the current i.MX clock support groups together unrelated clocks to a single clock which is then used by the driver. This can't be accomplished with the generic clock framework so we instead request the individual clocks in the driver. For i.MX there are generally three different clocks: ipg: bus clock (needed to access registers) ahb: dma relevant clock, sometimes referred to as hclk in the datasheet per: bit clock, pixel clock This patch changes the driver to request the individual clocks. Currently all clk_get will get the same clock until the SoCs are converted to the generic clock framework Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
parent
f4d40de39a
commit
529aa29e03
@ -136,7 +136,8 @@ struct mxcmci_host {
|
||||
u16 rev_no;
|
||||
unsigned int cmdat;
|
||||
|
||||
struct clk *clk;
|
||||
struct clk *clk_ipg;
|
||||
struct clk *clk_per;
|
||||
|
||||
int clock;
|
||||
|
||||
@ -672,7 +673,7 @@ static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
|
||||
{
|
||||
unsigned int divider;
|
||||
int prescaler = 0;
|
||||
unsigned int clk_in = clk_get_rate(host->clk);
|
||||
unsigned int clk_in = clk_get_rate(host->clk_per);
|
||||
|
||||
while (prescaler <= 0x800) {
|
||||
for (divider = 1; divider <= 0xF; divider++) {
|
||||
@ -900,12 +901,20 @@ static int mxcmci_probe(struct platform_device *pdev)
|
||||
host->res = r;
|
||||
host->irq = irq;
|
||||
|
||||
host->clk = clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(host->clk)) {
|
||||
ret = PTR_ERR(host->clk);
|
||||
host->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
||||
if (IS_ERR(host->clk_ipg)) {
|
||||
ret = PTR_ERR(host->clk_ipg);
|
||||
goto out_iounmap;
|
||||
}
|
||||
clk_enable(host->clk);
|
||||
|
||||
host->clk_per = devm_clk_get(&pdev->dev, "per");
|
||||
if (IS_ERR(host->clk_per)) {
|
||||
ret = PTR_ERR(host->clk_per);
|
||||
goto out_iounmap;
|
||||
}
|
||||
|
||||
clk_prepare_enable(host->clk_per);
|
||||
clk_prepare_enable(host->clk_ipg);
|
||||
|
||||
mxcmci_softreset(host);
|
||||
|
||||
@ -917,8 +926,8 @@ static int mxcmci_probe(struct platform_device *pdev)
|
||||
goto out_clk_put;
|
||||
}
|
||||
|
||||
mmc->f_min = clk_get_rate(host->clk) >> 16;
|
||||
mmc->f_max = clk_get_rate(host->clk) >> 1;
|
||||
mmc->f_min = clk_get_rate(host->clk_per) >> 16;
|
||||
mmc->f_max = clk_get_rate(host->clk_per) >> 1;
|
||||
|
||||
/* recommended in data sheet */
|
||||
writew(0x2db4, host->base + MMC_REG_READ_TO);
|
||||
@ -967,8 +976,8 @@ out_free_dma:
|
||||
if (host->dma)
|
||||
dma_release_channel(host->dma);
|
||||
out_clk_put:
|
||||
clk_disable(host->clk);
|
||||
clk_put(host->clk);
|
||||
clk_disable_unprepare(host->clk_per);
|
||||
clk_disable_unprepare(host->clk_ipg);
|
||||
out_iounmap:
|
||||
iounmap(host->base);
|
||||
out_free:
|
||||
@ -999,8 +1008,8 @@ static int mxcmci_remove(struct platform_device *pdev)
|
||||
if (host->dma)
|
||||
dma_release_channel(host->dma);
|
||||
|
||||
clk_disable(host->clk);
|
||||
clk_put(host->clk);
|
||||
clk_disable_unprepare(host->clk_per);
|
||||
clk_disable_unprepare(host->clk_ipg);
|
||||
|
||||
release_mem_region(host->res->start, resource_size(host->res));
|
||||
|
||||
@ -1018,7 +1027,8 @@ static int mxcmci_suspend(struct device *dev)
|
||||
|
||||
if (mmc)
|
||||
ret = mmc_suspend_host(mmc);
|
||||
clk_disable(host->clk);
|
||||
clk_disable_unprepare(host->clk_per);
|
||||
clk_disable_unprepare(host->clk_ipg);
|
||||
|
||||
return ret;
|
||||
}
|
||||
@ -1029,7 +1039,8 @@ static int mxcmci_resume(struct device *dev)
|
||||
struct mxcmci_host *host = mmc_priv(mmc);
|
||||
int ret = 0;
|
||||
|
||||
clk_enable(host->clk);
|
||||
clk_prepare_enable(host->clk_per);
|
||||
clk_prepare_enable(host->clk_ipg);
|
||||
if (mmc)
|
||||
ret = mmc_resume_host(mmc);
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user