renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 22:24:09 +08:00
Code

ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support

Browse Source 
mach-apf9328.c can be replaced with devicetree equivalent: imx1-apf9328.dts,
so remove the board file.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Alexander Shiyan 2016-08-06 07:56:23 +03:00 committed by Shawn Guo
parent 7705b5ed8a
commit 5081c3262f
5 changed files with 0 additions and 159 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/configs/imx_v4_v5_defconfig
View File

@ -23,7 +23,6 @@ CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MXC=y
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_MX27_3DS=y

1
arch/arm/configs/multi_v4t_defconfig
View File

@ -21,7 +21,6 @@ CONFIG_INTEGRATOR_CM920T=y
CONFIG_INTEGRATOR_CM922T_XA10=y
CONFIG_ARCH_MXC=y
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MACH_IMX1_DT=y
CONFIG_ARCH_NSPIRE=y
CONFIG_AEABI=y

8
arch/arm/mach-imx/Kconfig
View File

@ -109,14 +109,6 @@ config MACH_SCB9328
help
Say Y here if you are using a Synertronixx scb9328 board
config MACH_APF9328
bool "APF9328"
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX1
help
Say Yes here if you are using the Armadeus APF9328 development board
config MACH_IMX1_DT
bool "Support i.MX1 platforms from device tree"
select SOC_IMX1

1
arch/arm/mach-imx/Makefile
View File

@ -37,7 +37,6 @@ endif
# i.MX1 based machines
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
# i.MX21 based machines

148
arch/arm/mach-imx/mach-apf9328.c
View File

@ -1,148 +0,0 @@
/*
* linux/arch/arm/mach-imx/mach-apf9328.c
*
* Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
*
* This work is based on mach-scb9328.c which is:
* Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
* Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/dm9000.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
#include "devices-imx1.h"
#include "hardware.h"
#include "iomux-mx1.h"
static const int apf9328_pins[] __initconst = {
/* UART1 */
PC9_PF_UART1_CTS,
PC10_PF_UART1_RTS,
PC11_PF_UART1_TXD,
PC12_PF_UART1_RXD,
/* UART2 */
PB28_PF_UART2_CTS,
PB29_PF_UART2_RTS,
PB30_PF_UART2_TXD,
PB31_PF_UART2_RXD,
/* I2C */
PA15_PF_I2C_SDA,
PA16_PF_I2C_SCL,
};
/*
* The APF9328 can have up to 32MB NOR Flash
*/
static struct resource flash_resource = {
.start = MX1_CS0_PHYS,
.end = MX1_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct physmap_flash_data apf9328_flash_data = {
.width = 2,
};
static struct platform_device apf9328_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &apf9328_flash_data,
},
.resource = &flash_resource,
.num_resources = 1,
};
/*
* APF9328 has a DM9000 Ethernet controller
*/
static struct dm9000_plat_data dm9000_setup = {
.flags = DM9000_PLATF_16BITONLY
};
static struct resource dm9000_resources[] = {
{
.start = MX1_CS4_PHYS + 0x00C00000,
.end = MX1_CS4_PHYS + 0x00C00001,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_CS4_PHYS + 0x00C00002,
.end = MX1_CS4_PHYS + 0x00C00003,
.flags = IORESOURCE_MEM,
}, {
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
static struct platform_device dm9000x_device = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(dm9000_resources),
.resource = dm9000_resources,
.dev = {
.platform_data = &dm9000_setup,
}
};
static const struct imxuart_platform_data uart1_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const struct imxi2c_platform_data apf9328_i2c_data __initconst = {
.bitrate = 100000,
};
static struct platform_device *devices[] __initdata = {
&apf9328_flash_device,
&dm9000x_device,
};
static void __init apf9328_init(void)
{
imx1_soc_init();
mxc_gpio_setup_multiple_pins(apf9328_pins,
ARRAY_SIZE(apf9328_pins),
"APF9328");
imx1_add_imx_uart0(NULL);
imx1_add_imx_uart1(&uart1_pdata);
imx1_add_imx_i2c(&apf9328_i2c_data);
dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init apf9328_timer_init(void)
{
mx1_clocks_init(32768);
}
MACHINE_START(APF9328, "Armadeus APF9328")
/* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
.init_time = apf9328_timer_init,
.init_machine = apf9328_init,
.restart = mxc_restart,
MACHINE_END