renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-20 03:04:01 +08:00
Code

Amlogic DT 64-bit changes for v4.8

Browse Source 
- add pinctrl driver and pins for several devices
 - add reset driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXYGq/AAoJEFk3GJrT+8ZlqYMP/3YG+227gYXrWn9wHNurvj7v
 AMKYX0tsHZT+r4JYVimUmGN6//SGVIHuWpIoS4LUIdeh9uJg9xCE1rHYICGvv5eh
 DyFpty3oMxwV++U3H13axDuzQBTDQsmIz3vquusif1Paq9ncR806M1y7ZQIr4yUm
 UbmEKGxQqo/rCLSoIuSUAZjGLneJx+ixsGIiWBICwDz9tAzDcElr9tpTbJptoF5U
 7QRzhv/NdPcyxNE092U+hFvCWrABnBdiicdFIrnoExXtR0zvC4JcNpFvPLHfUgqg
 mjn4NxiSTidexVxuri5mI8uJnj++5ejEp0TQvp6MT+R7kbhovL2SbmiNqt3Gds1D
 T5jkcWz+Ow3tZobmp7CQX/oiCUTy81kAQ6+VCYPu+NUKZeyiMFs2SRF1s3wOxZU/
 6nFi6JpazCe9j5CwJC+TPxflUNb7mNheARpi0ZDxCA5Q/TVA42wASO69iG8+gipX
 X79a6uIRoVuFJcOYFhPRvtXBjQqG75RV21uBgDMryK4+sT9IF7bKbwQl9pHTFWU0
 Xg2VDhaX5u9vGxJLxjcL/e0kM2vGEi9DuhoxMGywFAcGYwoBM5CH2GW8Ok6FEgO1
 1EHq917VPbazzLIxVldm0FHBqg6aeA4Ps24m+8TNgw6sG2JSTiyI/9lZx/A6FHGC
 AU5efPPy2nPROcrrHP6c
 =SyuX
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Amlogic DT 64-bit changes for v4.8
- add pinctrl driver and pins for several devices
- add reset driver

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: amlogic: Enable Reset Controller on GXBB-based platforms
  ARM64: dts: amlogic: gxbb: add ethernet
  ARM64: dts: amlogic: gxbb: pinctrl: add/update UART
  ARM64: dts: amlogic: add pins for EMMC, SD
  ARM64: dts: amlogic: Enable pin controller on GXBB-based platforms
  documentation: Add compatibles for Amlogic Meson GXBB pin controllers
  ARM64: dts: amlogic: Add hiu and periphs buses

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2016-06-19 22:30:16 -07:00
commit 4fb92c60eb
5 changed files with 192 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
View File

@ -5,6 +5,8 @@ Required properties for the root node:
"amlogic,meson8b-cbus-pinctrl"
"amlogic,meson8-aobus-pinctrl"
"amlogic,meson8b-aobus-pinctrl"
"amlogic,meson-gxbb-periphs-pinctrl"
"amlogic,meson-gxbb-aobus-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===

20
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
View File

@ -45,6 +45,7 @@
/dts-v1/;
#include "meson-gxbb.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
@ -62,8 +63,27 @@
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
leds {
compatible = "gpio-leds";
blue {
label = "c2:blue:alive";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
};
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
};

9
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
View File

@ -62,4 +62,13 @@
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
};

3
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
View File

@ -56,4 +56,7 @@
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};

159
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
View File

@ -43,6 +43,8 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
/ {
compatible = "amlogic,meson-gxbb";
@ -129,13 +131,35 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
reset: reset-controller@4404 {
compatible = "amlogic,meson-gxbb-reset";
reg = <0x0 0x04404 0x0 0x20>;
#reset-cells = <1>;
};
uart_A: serial@84c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x084c0 0x0 0x14>;
reg = <0x0 0x84c0 0x0 0x14>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
uart_B: serial@84dc {
compatible = "amlogic,meson-uart";
reg = <0x0 0x84dc 0x0 0x14>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
uart_C: serial@8700 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x8700 0x0 0x14>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
};
gic: interrupt-controller@c4301000 {
@ -158,6 +182,29 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
<0x0 0x0002c 0x0 0x4>,
<0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
};
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
@ -167,6 +214,104 @@
};
};
periphs: periphs@c8834000 {
compatible = "simple-bus";
reg = <0x0 0xc8834000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
<0x0 0x00120 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
emmc_pins: emmc {
mux {
groups = "emmc_nand_d07",
"emmc_cmd",
"emmc_clk";
function = "emmc";
};
};
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
"sdcard_cmd",
"sdcard_clk";
function = "sdcard";
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
};
};
eth_pins: eth_c {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_rxd2",
"eth_rxd3",
"eth_rgmii_tx_clk",
"eth_tx_en",
"eth_txd0",
"eth_txd1",
"eth_txd2",
"eth_txd3";
function = "eth";
};
};
};
};
hiubus: hiubus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
};
apb: apb@d0000000 {
compatible = "simple-bus";
reg = <0x0 0xd0000000 0x0 0x200000>;
@ -174,5 +319,17 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson6-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
clocks = <&xtal>;
clock-names = "stmmaceth";
phy-mode = "rgmii";
status = "disabled";
};
};
};