From 4f58e6dceb0e44ca8f21568ed81e1df24e55964c Mon Sep 17 00:00:00 2001 From: "Allan W. Nielsen" Date: Wed, 12 Oct 2016 15:47:51 +0200 Subject: [PATCH] net: phy: Cleanup the Edge-Rate feature in Microsemi PHYs. Edge-Rate cleanup include the following: - Updated device tree bindings documentation for edge-rate - The edge-rate is now specified as a "slowdown", meaning that it is now being specified as positive values instead of negative (both documentation and implementation wise). - Only explicitly documented values for "vsc8531,vddmac" and "vsc8531,edge-slowdown" are accepted by the device driver. - Deleted include/dt-bindings/net/mscc-phy-vsc8531.h as it was not needed. - Read/validate devicetree settings in probe instead of init Signed-off-by: Allan W. Nielsen Signed-off-by: Raju Lakkaraju Signed-off-by: David S. Miller --- .../bindings/net/mscc-phy-vsc8531.txt | 51 ++++--- drivers/net/phy/mscc.c | 139 ++++++++---------- include/dt-bindings/net/mscc-phy-vsc8531.h | 21 --- 3 files changed, 92 insertions(+), 119 deletions(-) delete mode 100644 include/dt-bindings/net/mscc-phy-vsc8531.h diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt index 99c7eb0a00c8..bdefefc66594 100644 --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt @@ -6,22 +6,27 @@ Required properties: Documentation/devicetree/bindings/net/phy.txt Optional properties: -- vsc8531,vddmac : The vddmac in mV. +- vsc8531,vddmac : The vddmac in mV. Allowed values is listed + in the first row of Table 1 (below). + This property is only used in combination + with the 'edge-slowdown' property. + Default value is 3300. - vsc8531,edge-slowdown : % the edge should be slowed down relative to - the fastest possible edge time. Native sign - need not enter. + the fastest possible edge time. Edge rate sets the drive strength of the MAC - interface output signals. Changing the drive - strength will affect the edge rate of the output - signal. The goal of this setting is to help - reduce electrical emission (EMI) by being able - to reprogram drive strength and in effect slow - down the edge rate if desired. Table 1 shows the - impact to the edge rate per VDDMAC supply for each - drive strength setting. - Ref: Table:1 - Edge rate change below. - -Note: see dt-bindings/net/mscc-phy-vsc8531.h for applicable values + interface output signals. Changing the + drive strength will affect the edge rate of + the output signal. The goal of this setting + is to help reduce electrical emission (EMI) + by being able to reprogram drive strength + and in effect slow down the edge rate if + desired. + To adjust the edge-slowdown, the 'vddmac' + must be specified. Table 1 lists the + supported edge-slowdown values for a given + 'vddmac'. + Default value is 0%. + Ref: Table:1 - Edge rate change (below). Table: 1 - Edge rate change ----------------------------------------------------------------| @@ -29,23 +34,23 @@ Table: 1 - Edge rate change | | | 3300 mV 2500 mV 1800 mV 1500 mV | |---------------------------------------------------------------| -| Default Deafult Default Default | +| 0% 0% 0% 0% | | (Fastest) (recommended) (recommended) | |---------------------------------------------------------------| -| -2% -3% -5% -6% | +| 2% 3% 5% 6% | |---------------------------------------------------------------| -| -4% -6% -9% -14% | +| 4% 6% 9% 14% | |---------------------------------------------------------------| -| -7% -10% -16% -21% | +| 7% 10% 16% 21% | |(recommended) (recommended) | |---------------------------------------------------------------| -| -10% -14% -23% -29% | +| 10% 14% 23% 29% | |---------------------------------------------------------------| -| -17% -23% -35% -42% | +| 17% 23% 35% 42% | |---------------------------------------------------------------| -| -29% -37% -52% -58% | +| 29% 37% 52% 58% | |---------------------------------------------------------------| -| -53% -63% -76% -77% | +| 53% 63% 76% 77% | | (slowest) | |---------------------------------------------------------------| @@ -54,5 +59,5 @@ Example: vsc8531_0: ethernet-phy@0 { compatible = "ethernet-phy-id0007.0570"; vsc8531,vddmac = <3300>; - vsc8531,edge-slowdown = <21>; + vsc8531,edge-slowdown = <7>; }; diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c index 77a6671d572e..113616b92abb 100644 --- a/drivers/net/phy/mscc.c +++ b/drivers/net/phy/mscc.c @@ -12,7 +12,6 @@ #include #include #include -#include #include enum rgmii_rx_clock_delay { @@ -69,23 +68,29 @@ enum rgmii_rx_clock_delay { #define PHY_ID_VSC8531 0x00070570 #define PHY_ID_VSC8541 0x00070770 -struct edge_rate_table { - u16 vddmac; - int slowdown[MSCC_SLOWDOWN_MAX]; -}; - -struct edge_rate_table edge_table[MSCC_VDDMAC_MAX] = { - {3300, { 0, -2, -4, -7, -10, -17, -29, -53} }, - {2500, { 0, -3, -6, -10, -14, -23, -37, -63} }, - {1800, { 0, -5, -9, -16, -23, -35, -52, -76} }, - {1500, { 0, -6, -14, -21, -29, -42, -58, -77} }, -}; +#define MSCC_VDDMAC_1500 1500 +#define MSCC_VDDMAC_1800 1800 +#define MSCC_VDDMAC_2500 2500 +#define MSCC_VDDMAC_3300 3300 struct vsc8531_private { - u8 edge_slowdown; - u16 vddmac; + int rate_magic; }; +#ifdef CONFIG_OF_MDIO +struct vsc8531_edge_rate_table { + u16 vddmac; + u8 slowdown[8]; +}; + +static const struct vsc8531_edge_rate_table edge_table[] = { + {MSCC_VDDMAC_3300, { 0, 2, 4, 7, 10, 17, 29, 53} }, + {MSCC_VDDMAC_2500, { 0, 3, 6, 10, 14, 23, 37, 63} }, + {MSCC_VDDMAC_1800, { 0, 5, 9, 16, 23, 35, 52, 76} }, + {MSCC_VDDMAC_1500, { 0, 6, 14, 21, 29, 42, 58, 77} }, +}; +#endif /* CONFIG_OF_MDIO */ + static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page) { int rc; @@ -205,29 +210,43 @@ out_unlock: mutex_unlock(&phydev->lock); } -static u8 edge_rate_magic_get(u16 vddmac, - int slowdown) +#ifdef CONFIG_OF_MDIO +static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev) { - int rc = (MSCC_SLOWDOWN_MAX - 1); - u8 vdd; u8 sd; + u16 vdd; + int rc, i, j; + struct device *dev = &phydev->mdio.dev; + struct device_node *of_node = dev->of_node; + u8 sd_array_size = ARRAY_SIZE(edge_table[0].slowdown); - for (vdd = 0; vdd < MSCC_VDDMAC_MAX; vdd++) { - if (edge_table[vdd].vddmac == vddmac) { - for (sd = 0; sd < MSCC_SLOWDOWN_MAX; sd++) { - if (edge_table[vdd].slowdown[sd] <= slowdown) { - rc = (MSCC_SLOWDOWN_MAX - sd - 1); - break; - } - } - } - } + if (!of_node) + return -ENODEV; - return rc; + rc = of_property_read_u16(of_node, "vsc8531,vddmac", &vdd); + if (rc != 0) + vdd = MSCC_VDDMAC_3300; + + rc = of_property_read_u8(of_node, "vsc8531,edge-slowdown", &sd); + if (rc != 0) + sd = 0; + + for (i = 0; i < ARRAY_SIZE(edge_table); i++) + if (edge_table[i].vddmac == vdd) + for (j = 0; j < sd_array_size; j++) + if (edge_table[i].slowdown[j] == sd) + return (sd_array_size - j - 1); + + return -EINVAL; } +#else +static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev) +{ + return 0; +} +#endif /* CONFIG_OF_MDIO */ -static int vsc85xx_edge_rate_cntl_set(struct phy_device *phydev, - u8 edge_rate) +static int vsc85xx_edge_rate_cntl_set(struct phy_device *phydev, u8 edge_rate) { int rc; u16 reg_val; @@ -308,45 +327,10 @@ out_unlock: return rc; } -#ifdef CONFIG_OF_MDIO -static int vsc8531_of_init(struct phy_device *phydev) -{ - int rc; - struct vsc8531_private *vsc8531 = phydev->priv; - struct device *dev = &phydev->mdio.dev; - struct device_node *of_node = dev->of_node; - - if (!of_node) - return -ENODEV; - - rc = of_property_read_u16(of_node, "vsc8531,vddmac", - &vsc8531->vddmac); - if (rc == -EINVAL) - vsc8531->vddmac = MSCC_VDDMAC_3300; - rc = of_property_read_u8(of_node, "vsc8531,edge-slowdown", - &vsc8531->edge_slowdown); - if (rc == -EINVAL) - vsc8531->edge_slowdown = 0; - - rc = 0; - return rc; -} -#else -static int vsc8531_of_init(struct phy_device *phydev) -{ - return 0; -} -#endif /* CONFIG_OF_MDIO */ - static int vsc85xx_config_init(struct phy_device *phydev) { int rc; struct vsc8531_private *vsc8531 = phydev->priv; - u8 edge_rate; - - rc = vsc8531_of_init(phydev); - if (rc) - return rc; rc = vsc85xx_default_config(phydev); if (rc) @@ -356,9 +340,7 @@ static int vsc85xx_config_init(struct phy_device *phydev) if (rc) return rc; - edge_rate = edge_rate_magic_get(vsc8531->vddmac, - -(int)vsc8531->edge_slowdown); - rc = vsc85xx_edge_rate_cntl_set(phydev, edge_rate); + rc = vsc85xx_edge_rate_cntl_set(phydev, vsc8531->rate_magic); if (rc) return rc; @@ -396,14 +378,21 @@ static int vsc85xx_config_intr(struct phy_device *phydev) static int vsc85xx_probe(struct phy_device *phydev) { + int rate_magic; struct vsc8531_private *vsc8531; + rate_magic = vsc85xx_edge_rate_magic_get(phydev); + if (rate_magic < 0) + return rate_magic; + vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL); if (!vsc8531) return -ENOMEM; phydev->priv = vsc8531; + vsc8531->rate_magic = rate_magic; + return 0; } @@ -424,9 +413,9 @@ static struct phy_driver vsc85xx_driver[] = { .config_intr = &vsc85xx_config_intr, .suspend = &genphy_suspend, .resume = &genphy_resume, - .probe = &vsc85xx_probe, - .set_wol = &vsc85xx_wol_set, - .get_wol = &vsc85xx_wol_get, + .probe = &vsc85xx_probe, + .set_wol = &vsc85xx_wol_set, + .get_wol = &vsc85xx_wol_get, }, { .phy_id = PHY_ID_VSC8541, @@ -443,9 +432,9 @@ static struct phy_driver vsc85xx_driver[] = { .config_intr = &vsc85xx_config_intr, .suspend = &genphy_suspend, .resume = &genphy_resume, - .probe = &vsc85xx_probe, - .set_wol = &vsc85xx_wol_set, - .get_wol = &vsc85xx_wol_get, + .probe = &vsc85xx_probe, + .set_wol = &vsc85xx_wol_set, + .get_wol = &vsc85xx_wol_get, } }; diff --git a/include/dt-bindings/net/mscc-phy-vsc8531.h b/include/dt-bindings/net/mscc-phy-vsc8531.h deleted file mode 100644 index 2383dd20ff43..000000000000 --- a/include/dt-bindings/net/mscc-phy-vsc8531.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Device Tree constants for Microsemi VSC8531 PHY - * - * Author: Nagaraju Lakkaraju - * - * License: Dual MIT/GPL - * Copyright (c) 2016 Microsemi Corporation - */ - -#ifndef _DT_BINDINGS_MSCC_VSC8531_H -#define _DT_BINDINGS_MSCC_VSC8531_H - -/* MAC interface Edge rate control VDDMAC in milli Volts */ -#define MSCC_VDDMAC_3300 3300 -#define MSCC_VDDMAC_2500 2500 -#define MSCC_VDDMAC_1800 1800 -#define MSCC_VDDMAC_1500 1500 -#define MSCC_VDDMAC_MAX 4 -#define MSCC_SLOWDOWN_MAX 8 - -#endif