renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-11-19 16:14:13 +08:00
Code

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

Browse Source 
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (25 commits)
  OMAP2/3: DMTIMER: Clear pending interrupts when stopping a timer
  PM debug: Fix warning when no CONFIG_DEBUG_FS
  OMAP3: PM: DSS PM_WKEN to refill DMA
  OMAP: timekeeping: time should not stop during suspend
  OMAP3: PM: Force write last pad config register into save area
  OMAP: omap3_pm_get_suspend_state() error ignored in pwrdm_suspend_get()
  OMAP3: PM: Enable wake-up from McBSP2, 3 and 4 modules
  OMAP3: PM debug: fix build error when !CONFIG_DEBUG_FS
  OMAP3: PM: Removing redundant and potentially dangerous PRCM configration
  OMAP3: Fixed ARM aux ctrl register save/restore
  OMAP3: CPUidle: Fixed timer resolution
  OMAP3: PM: Remove duplicate code blocks
  OMAP3: PM: Disable interrupt controller AUTOIDLE before WFI
  OMAP3: PM: Enable system control module autoidle
  OMAP3: PM: Ack pending interrupts before entering suspend
  omap: Enable GPMC clock in gpmc_init
  OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0"
  OMAP4: clocks: Fix the clksel_rate struct DPLL divs
  OMAP4: PRCM: Fix the base address for CHIRONSS reg defines
  OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in omap_dma_unlink_lch()
  ...
This commit is contained in:
Linus Torvalds 2010-01-25 18:56:12 -08:00
commit 4f4e65d248
23 changed files with 229 additions and 131 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/arm/mach-omap1/clock.c
View File

@ -214,8 +214,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
struct mpu_rate * ptr;
unsigned long dpll1_rate, ref_rate;
dpll1_rate = clk_get_rate(ck_dpll1_p);
ref_rate = clk_get_rate(ck_ref_p);
dpll1_rate = ck_dpll1_p->rate;
ref_rate = ck_ref_p->rate;
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
if (ptr->xtal != ref_rate)
@ -306,7 +306,7 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
long highest_rate;
unsigned long ref_rate;
ref_rate = clk_get_rate(ck_ref_p);
ref_rate = ck_ref_p->rate;
highest_rate = -EINVAL;

4
arch/arm/mach-omap2/clock34xx_data.c
View File

@ -671,7 +671,6 @@ static struct clk dpll4_m3x2_ck = {
.name = "dpll4_m3x2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m3_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_TV_SHIFT,
.flags = INVERT_ENABLE,
@ -811,7 +810,6 @@ static struct clk dpll4_m6x2_ck = {
.name = "dpll4_m6x2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m6_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
.flags = INVERT_ENABLE,
@ -1047,7 +1045,6 @@ static struct clk iva2_ck = {
.name = "iva2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll2_m2_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.clkdm_name = "iva2_clkdm",
@ -1121,7 +1118,6 @@ static struct clk gfx_l3_ck = {
.name = "gfx_l3_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &l3_ick,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
.recalc = &followparent_recalc,

62
arch/arm/mach-omap2/clock44xx_data.c
View File

@ -346,37 +346,37 @@ static struct clk aess_fclk = {
};
static const struct clksel_rate div31_1to31_rates[] = {
{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
{ .div = 3, .val = 2, .flags = RATE_IN_4430 },
{ .div = 4, .val = 3, .flags = RATE_IN_4430 },
{ .div = 5, .val = 4, .flags = RATE_IN_4430 },
{ .div = 6, .val = 5, .flags = RATE_IN_4430 },
{ .div = 7, .val = 6, .flags = RATE_IN_4430 },
{ .div = 8, .val = 7, .flags = RATE_IN_4430 },
{ .div = 9, .val = 8, .flags = RATE_IN_4430 },
{ .div = 10, .val = 9, .flags = RATE_IN_4430 },
{ .div = 11, .val = 10, .flags = RATE_IN_4430 },
{ .div = 12, .val = 11, .flags = RATE_IN_4430 },
{ .div = 13, .val = 12, .flags = RATE_IN_4430 },
{ .div = 14, .val = 13, .flags = RATE_IN_4430 },
{ .div = 15, .val = 14, .flags = RATE_IN_4430 },
{ .div = 16, .val = 15, .flags = RATE_IN_4430 },
{ .div = 17, .val = 16, .flags = RATE_IN_4430 },
{ .div = 18, .val = 17, .flags = RATE_IN_4430 },
{ .div = 19, .val = 18, .flags = RATE_IN_4430 },
{ .div = 20, .val = 19, .flags = RATE_IN_4430 },
{ .div = 21, .val = 20, .flags = RATE_IN_4430 },
{ .div = 22, .val = 21, .flags = RATE_IN_4430 },
{ .div = 23, .val = 22, .flags = RATE_IN_4430 },
{ .div = 24, .val = 23, .flags = RATE_IN_4430 },
{ .div = 25, .val = 24, .flags = RATE_IN_4430 },
{ .div = 26, .val = 25, .flags = RATE_IN_4430 },
{ .div = 27, .val = 26, .flags = RATE_IN_4430 },
{ .div = 28, .val = 27, .flags = RATE_IN_4430 },
{ .div = 29, .val = 28, .flags = RATE_IN_4430 },
{ .div = 30, .val = 29, .flags = RATE_IN_4430 },
{ .div = 31, .val = 30, .flags = RATE_IN_4430 },
{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
{ .div = 2, .val = 2, .flags = RATE_IN_4430 },
{ .div = 3, .val = 3, .flags = RATE_IN_4430 },
{ .div = 4, .val = 4, .flags = RATE_IN_4430 },
{ .div = 5, .val = 5, .flags = RATE_IN_4430 },
{ .div = 6, .val = 6, .flags = RATE_IN_4430 },
{ .div = 7, .val = 7, .flags = RATE_IN_4430 },
{ .div = 8, .val = 8, .flags = RATE_IN_4430 },
{ .div = 9, .val = 9, .flags = RATE_IN_4430 },
{ .div = 10, .val = 10, .flags = RATE_IN_4430 },
{ .div = 11, .val = 11, .flags = RATE_IN_4430 },
{ .div = 12, .val = 12, .flags = RATE_IN_4430 },
{ .div = 13, .val = 13, .flags = RATE_IN_4430 },
{ .div = 14, .val = 14, .flags = RATE_IN_4430 },
{ .div = 15, .val = 15, .flags = RATE_IN_4430 },
{ .div = 16, .val = 16, .flags = RATE_IN_4430 },
{ .div = 17, .val = 17, .flags = RATE_IN_4430 },
{ .div = 18, .val = 18, .flags = RATE_IN_4430 },
{ .div = 19, .val = 19, .flags = RATE_IN_4430 },
{ .div = 20, .val = 20, .flags = RATE_IN_4430 },
{ .div = 21, .val = 21, .flags = RATE_IN_4430 },
{ .div = 22, .val = 22, .flags = RATE_IN_4430 },
{ .div = 23, .val = 23, .flags = RATE_IN_4430 },
{ .div = 24, .val = 24, .flags = RATE_IN_4430 },
{ .div = 25, .val = 25, .flags = RATE_IN_4430 },
{ .div = 26, .val = 26, .flags = RATE_IN_4430 },
{ .div = 27, .val = 27, .flags = RATE_IN_4430 },
{ .div = 28, .val = 28, .flags = RATE_IN_4430 },
{ .div = 29, .val = 29, .flags = RATE_IN_4430 },
{ .div = 30, .val = 30, .flags = RATE_IN_4430 },
{ .div = 31, .val = 31, .flags = RATE_IN_4430 },
{ .div = 0 },
};

2
arch/arm/mach-omap2/cpuidle34xx.c
View File

@ -137,7 +137,7 @@ return_sleep_time:
local_irq_enable();
local_fiq_enable();
return (u32)timespec_to_ns(&ts_idle)/1000;
return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
}
/**

2
arch/arm/mach-omap2/gpmc.c
View File

@ -534,6 +534,8 @@ void __init gpmc_init(void)
BUG();
}
clk_enable(gpmc_l3_clk);
l = gpmc_read_reg(GPMC_REVISION);
printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
/* Set smart idle mode and automatic L3 clock gating */

41
arch/arm/mach-omap2/id.c
View File

@ -188,6 +188,8 @@ void __init omap3_check_revision(void)
u16 hawkeye;
u8 rev;
omap_chip.oc = CHIP_IS_OMAP3430;
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
@ -196,6 +198,7 @@ void __init omap3_check_revision(void)
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
return;
}
@ -216,18 +219,28 @@ void __init omap3_check_revision(void)
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
break;
case 4:
omap_revision = OMAP3430_REV_ES3_1;
omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
break;
case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_1;
omap_revision = OMAP3430_REV_ES3_1_2;
/* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
}
break;
case 0xb868:
@ -235,14 +248,18 @@ void __init omap3_check_revision(void)
*
* Set the device to be OMAP3505 here. Actual device
* is identified later based on the features.
*
* REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
omap_revision = OMAP3505_REV(rev);
omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
break;
case 0xb891:
/* FALLTHROUGH */
default:
/* Unknown default to latest silicon rev as default*/
omap_revision = OMAP3630_REV_ES1_0;
omap_chip.oc |= CHIP_IS_OMAP3630ES1;
}
}
@ -360,6 +377,7 @@ void __init omap2_check_revision(void)
omap3_check_revision();
omap3_check_features();
omap3_cpuinfo();
return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
return;
@ -374,27 +392,14 @@ void __init omap2_check_revision(void)
if (cpu_is_omap243x()) {
/* Currently only supports 2430ES2.1 and 2430-all */
omap_chip.oc |= CHIP_IS_OMAP2430;
return;
} else if (cpu_is_omap242x()) {
/* Currently only supports 2420ES2.1.1 and 2420-all */
omap_chip.oc |= CHIP_IS_OMAP2420;
} else if (cpu_is_omap3505() || cpu_is_omap3517()) {
omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
} else if (cpu_is_omap343x()) {
omap_chip.oc = CHIP_IS_OMAP3430;
if (omap_rev() == OMAP3430_REV_ES1_0)
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
omap_rev() <= OMAP3430_REV_ES2_1)
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
else if (omap_rev() == OMAP3430_REV_ES3_0)
omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
else if (omap_rev() == OMAP3430_REV_ES3_1)
omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
else if (omap_rev() == OMAP3630_REV_ES1_0)
omap_chip.oc |= CHIP_IS_OMAP3630ES1;
} else {
pr_err("Uninitialized omap_chip, please fix!\n");
return;
}
pr_err("Uninitialized omap_chip, please fix!\n");
}
/*

18
arch/arm/mach-omap2/irq.c
View File

@ -274,4 +274,22 @@ void omap_intc_restore_context(void)
}
/* MIRs are saved and restore with other PRCM registers */
}
void omap3_intc_suspend(void)
{
/* A pending interrupt would prevent OMAP from entering suspend */
omap_ack_irq(0);
}
void omap3_intc_prepare_idle(void)
{
/* Disable autoidle as it can stall interrupt controller */
intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
}
void omap3_intc_resume_idle(void)
{
/* Re-enable autoidle */
intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
}
#endif /* CONFIG_ARCH_OMAP3 */

27
arch/arm/mach-omap2/mux.c
View File

@ -51,7 +51,7 @@ struct omap_mux_entry {
static unsigned long mux_phys;
static void __iomem *mux_base;
static inline u16 omap_mux_read(u16 reg)
u16 omap_mux_read(u16 reg)
{
if (cpu_is_omap24xx())
return __raw_readb(mux_base + reg);
@ -59,7 +59,7 @@ static inline u16 omap_mux_read(u16 reg)
return __raw_readw(mux_base + reg);
}
static inline void omap_mux_write(u16 val, u16 reg)
void omap_mux_write(u16 val, u16 reg)
{
if (cpu_is_omap24xx())
__raw_writeb(val, mux_base + reg);
@ -67,6 +67,14 @@ static inline void omap_mux_write(u16 val, u16 reg)
__raw_writew(val, mux_base + reg);
}
void omap_mux_write_array(struct omap_board_mux *board_mux)
{
while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
omap_mux_write(board_mux->value, board_mux->reg_offset);
board_mux++;
}
}
#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
static struct omap_mux_cfg arch_mux_cfg;
@ -833,14 +841,6 @@ static void __init omap_mux_set_cmdline_signals(void)
kfree(options);
}
static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
{
while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
omap_mux_write(board_mux->value, board_mux->reg_offset);
board_mux++;
}
}
static int __init omap_mux_copy_names(struct omap_mux *src,
struct omap_mux *dst)
{
@ -998,12 +998,15 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
omap_mux_package_fixup(package_subset, superset);
if (package_balls)
omap_mux_package_init_balls(package_balls, superset);
omap_mux_set_cmdline_signals();
omap_mux_set_board_signals(board_mux);
#endif
omap_mux_init_list(superset);
#ifdef CONFIG_OMAP_MUX
omap_mux_set_cmdline_signals();
omap_mux_write_array(board_mux);
#endif
return 0;
}

24
arch/arm/mach-omap2/mux.h
View File

@ -146,6 +146,30 @@ u16 omap_mux_get_gpio(int gpio);
*/
void omap_mux_set_gpio(u16 val, int gpio);
/**
* omap_mux_read() - read mux register
* @mux_offset: Offset of the mux register
*
*/
u16 omap_mux_read(u16 mux_offset);
/**
* omap_mux_write() - write mux register
* @val: New mux register value
* @mux_offset: Offset of the mux register
*
* This should be only needed for dynamic remuxing of non-gpio signals.
*/
void omap_mux_write(u16 val, u16 mux_offset);
/**
* omap_mux_write_array() - write an array of mux registers
* @board_mux: Array of mux registers terminated by MAP_MUX_TERMINATOR
*
* This should be only needed for dynamic remuxing of non-gpio signals.
*/
void omap_mux_write_array(struct omap_board_mux *board_mux);
/**
* omap3_mux_init() - initialize mux system with board specific set
* @board_mux: Board specific mux table

3
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -94,7 +94,8 @@ static int _update_sysc_cache(struct omap_hwmod *oh)
oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
return 0;
}

12
arch/arm/mach-omap2/pm-debug.c
View File

@ -54,8 +54,6 @@ int omap2_pm_debug;
regs[reg_count++].val = \
__raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
static int __init pm_dbg_init(void);
void omap2_pm_dump(int mode, int resume, unsigned int us)
{
struct reg {
@ -167,6 +165,8 @@ struct dentry *pm_dbg_dir;
static int pm_dbg_init_done;
static int __init pm_dbg_init(void);
enum {
DEBUG_FILE_COUNTERS = 0,
DEBUG_FILE_TIMERS,
@ -488,9 +488,11 @@ int pm_dbg_regset_init(int reg_set)
static int pwrdm_suspend_get(void *data, u64 *val)
{
*val = omap3_pm_get_suspend_state((struct powerdomain *)data);
int ret;
ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
*val = ret;
if (*val >= 0)
if (ret >= 0)
return 0;
return *val;
}
@ -604,6 +606,4 @@ static int __init pm_dbg_init(void)
}
arch_initcall(pm_dbg_init);
#else
void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
#endif

8
arch/arm/mach-omap2/pm.h
View File

@ -32,12 +32,16 @@ extern struct omap_dm_timer *gptimer_wakeup;
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern int omap2_pm_debug;
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
#define omap2_pm_debug 0
#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
extern int pm_dbg_regset_save(int reg_set);
extern int pm_dbg_regset_init(int reg_set);
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
#define omap2_pm_debug 0
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
#define pm_dbg_regset_save(reg_set) do {} while (0);
#define pm_dbg_regset_init(reg_set) do {} while (0);

47
arch/arm/mach-omap2/pm34xx.c
View File

@ -26,6 +26,7 @@
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
@ -126,7 +127,15 @@ static void omap3_core_save_context(void)
/* wait for the save to complete */
while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
& PADCONF_SAVE_DONE))
;
udelay(1);
/*
* Force write last pad into memory, as this can fail in some
* cases according to erratas 1.157, 1.185
*/
omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
/* Save the Interrupt controller context */
omap_intc_save_context();
/* Save the GPMC context */
@ -392,6 +401,7 @@ void omap_sram_idle(void)
prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
omap3_enable_io_chain();
}
omap3_intc_prepare_idle();
/*
* On EMU/HS devices ROM code restores a SRDC value
@ -438,6 +448,7 @@ void omap_sram_idle(void)
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
}
omap3_intc_resume_idle();
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
@ -578,6 +589,8 @@ static int omap3_pm_suspend(void)
}
omap_uart_prepare_suspend();
omap3_intc_suspend();
omap_sram_idle();
restore:
@ -835,6 +848,8 @@ static void __init prcm_setup_regs(void)
CM_AUTOIDLE);
}
omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
/*
* Set all plls to autoidle. This is needed until autoidle is
* enabled by clockfw
@ -875,15 +890,23 @@ static void __init prcm_setup_regs(void)
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* Enable PM_WKEN to support DSS LPR */
prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
OMAP3430_DSS_MOD, PM_WKEN);
/* Enable wakeups in PER */
prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
OMAP3430_EN_MCBSP4,
OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
OMAP3430_EN_MCBSP4,
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
@ -904,24 +927,6 @@ static void __init prcm_setup_regs(void)
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
/* Don't attach IVA interrupts */
prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
/* Clear any pending 'reset' flags */
prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
omap3_iva_idle();
omap3_d2d_idle();
}

11
arch/arm/mach-omap2/prcm.c
View File

@ -44,7 +44,6 @@ struct omap3_prcm_regs {
u32 iva2_cm_clksel2;
u32 cm_sysconfig;
u32 sgx_cm_clksel;
u32 wkup_cm_clksel;
u32 dss_cm_clksel;
u32 cam_cm_clksel;
u32 per_cm_clksel;
@ -53,7 +52,6 @@ struct omap3_prcm_regs {
u32 pll_cm_autoidle2;
u32 pll_cm_clksel4;
u32 pll_cm_clksel5;
u32 pll_cm_clken;
u32 pll_cm_clken2;
u32 cm_polctrl;
u32 iva2_cm_fclken;
@ -77,7 +75,6 @@ struct omap3_prcm_regs {
u32 usbhost_cm_iclken;
u32 iva2_cm_autiidle2;
u32 mpu_cm_autoidle2;
u32 pll_cm_autoidle;
u32 iva2_cm_clkstctrl;
u32 mpu_cm_clkstctrl;
u32 core_cm_clkstctrl;
@ -274,7 +271,6 @@ void omap3_prcm_save_context(void)
prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
prcm_context.sgx_cm_clksel =
cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
prcm_context.dss_cm_clksel =
cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
prcm_context.cam_cm_clksel =
@ -291,8 +287,6 @@ void omap3_prcm_save_context(void)
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
prcm_context.pll_cm_clksel5 =
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
prcm_context.pll_cm_clken =
cm_read_mod_reg(PLL_MOD, CM_CLKEN);
prcm_context.pll_cm_clken2 =
cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
@ -338,8 +332,6 @@ void omap3_prcm_save_context(void)
cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
prcm_context.mpu_cm_autoidle2 =
cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
prcm_context.pll_cm_autoidle =
cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
prcm_context.iva2_cm_clkstctrl =
cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
prcm_context.mpu_cm_clkstctrl =
@ -431,7 +423,6 @@ void omap3_prcm_restore_context(void)
__raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
CM_CLKSEL);
cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL);
cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
CM_CLKSEL);
cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
@ -448,7 +439,6 @@ void omap3_prcm_restore_context(void)
OMAP3430ES2_CM_CLKSEL4);
cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
OMAP3430ES2_CM_CLKSEL5);
cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN);
cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
OMAP3430ES2_CM_CLKEN2);
__raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
@ -487,7 +477,6 @@ void omap3_prcm_restore_context(void)
cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
CM_AUTOIDLE2);
cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE);
cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
CM_CLKSTCTRL);
cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);

2
arch/arm/mach-omap2/prm.h
View File

@ -24,6 +24,8 @@
OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
#define OMAP44XX_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
#define OMAP44XX_CHIRONSS_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
#include "prm44xx.h"

32
arch/arm/mach-omap2/prm44xx.h
View File

@ -386,26 +386,26 @@
/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
#define OMAP4430_REVISION_PRCM OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
#define OMAP4430_REVISION_PRCM OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
#endif

13
arch/arm/mach-omap2/sleep34xx.S
View File

@ -245,7 +245,8 @@ restore:
mov r1, #0 @ set task id for ROM code in r1
mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
adr r3, write_aux_control_params @ r3 points to parameters
ldr r4, scratchpad_base
ldr r3, [r4, #0xBC] @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
@ -253,14 +254,14 @@ restore:
b logic_l1_restore
l2_inv_api_params:
.word 0x1, 0x00
write_aux_control_params:
.word 0x1, 0x72
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalide L2
smi: .word 0xE1600070 @ Call SMI monitor (smieq)
/* Write to Aux control register to set some bits */
mov r0, #0x72
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#4]
mov r12, #0x3
.word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
@ -271,6 +272,7 @@ logic_l1_restore:
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
adds r3, r3, #8
ldmia r3!, {r4-r6}
mov sp, r4
msr spsr_cxsf, r5
@ -387,6 +389,9 @@ usettbr0:
save_context_wfi:
/*b save_context_wfi*/ @ enable to debug save code
mov r8, r0 /* Store SDRAM address in r8 */
mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
mov r4, #0x1 @ Number of parameters for restore call
stmia r8!, {r4-r5}
/* Check what that target sleep state is:stored in r1*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost */

26
arch/arm/plat-omap/common.c
View File

@ -172,6 +172,32 @@ unsigned long long sched_clock(void)
clocksource_32k.mult, clocksource_32k.shift);
}
/**
* read_persistent_clock - Return time from a persistent clock.
*
* Reads the time from a source which isn't disabled during PM, the
* 32k sync timer. Convert the cycles elapsed since last read into
* nsecs and adds to a monotonically increasing timespec.
*/
static struct timespec persistent_ts;
static cycles_t cycles, last_cycles;
void read_persistent_clock(struct timespec *ts)
{
unsigned long long nsecs;
cycles_t delta;
struct timespec *tsp = &persistent_ts;
last_cycles = cycles;
cycles = clocksource_32k.read(&clocksource_32k);
delta = cycles - last_cycles;
nsecs = clocksource_cyc2ns(delta,
clocksource_32k.mult, clocksource_32k.shift);
timespec_add_ns(tsp, nsecs);
*ts = *tsp;
}
static int __init omap_init_clocksource_32k(void)
{
static char err[] __initdata = KERN_ERR

2
arch/arm/plat-omap/dma.c
View File

@ -1183,7 +1183,7 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
}
if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
(dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
(dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
"before unlinking\n");
dump_stack();

13
arch/arm/plat-omap/dmtimer.c
View File

@ -551,6 +551,19 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
if (l & OMAP_TIMER_CTRL_ST) {
l &= ~0x1;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
/* Readback to make sure write has completed */
omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
/*
* Wait for functional clock period x 3.5 to make sure that
* timer is stopped
*/
udelay(3500000 / clk_get_rate(timer->fclk) + 1);
/* Ack possibly pending interrupt */
omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
OMAP_TIMER_INT_OVERFLOW);
#endif
}
}
EXPORT_SYMBOL_GPL(omap_dm_timer_stop);

1
arch/arm/plat-omap/include/plat/cpu.h
View File

@ -434,6 +434,7 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP3430_REV_ES2_1 0x34302034
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
#define OMAP3430_REV_ES3_1_2 0x34305034
#define OMAP3630_REV_ES1_0 0x36300034

3
arch/arm/plat-omap/include/plat/irqs.h
View File

@ -499,6 +499,9 @@ extern void omap_init_irq(void);
extern int omap_irq_pending(void);
void omap_intc_save_context(void);
void omap_intc_restore_context(void);
void omap3_intc_suspend(void);
void omap3_intc_prepare_idle(void);
void omap3_intc_resume_idle(void);
#endif
#include <mach/hardware.h>

1
arch/arm/plat-omap/include/plat/omap_hwmod.h
View File

@ -227,6 +227,7 @@ struct omap_hwmod_ocp_if {
#define SYSC_HAS_SIDLEMODE (1 << 5)
#define SYSC_HAS_MIDLEMODE (1 << 6)
#define SYSS_MISSING (1 << 7)
#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0