Update extcon for 4.9

Detailed description for this pull request: 1. Support the extcon property and add the synchronization APIs. - This feature supports the extcon property for external connector because each external connector might have the property according to the H/W design. - The property name should keep the following style. : EXTCON_PROP_USB_[property_name] : EXTCON_PROP_CHG_[property_name] : EXTCON_PROP_JACK_[property_name] : EXTCON_PROP_DISP_[property_name] - Add the new extcon APIs to support the extcon property. : extcon_set_property() : extcon_get_property() : extcon_set_property_capability() : extcon_get_property_capability() - Add the new synchronization extcon APIs. : This feature adds the synchronization extcon APIs to support the noti for both state and property. When extcon_*_sync() functions is called, the extcon informs the information from extcon provider to extcon client. The extcon driver may need to change the both state and multiple properties at the same time. After setting the data of a external connector, the extcon send the notification to client driver with the extcon_*_sync(). : extcon_sync() : extcon_set_state_sync() : extcon_set_property_sync() - Change the name of existing APIs. : extcon_set_cable_state_() -> extcon_set_cable() : extcon_get_cable_state_() -> extcon_get_cable() 2. Add the extcon type to group the connector into five category. - EXTCON_TYPE_USB : USB connector - EXTCON_TYPE_CHG : Charger connector - EXTCON_TYPE_JACK : Jack connector - EXTCON_TYPE_DISP : Display connector - EXTCON_TYPE_MISC : Miscellaneous connector 3. Add the new property for external connector. - EXTCON_PROP_USB_VBUS - EXTCON_PROP_USB_TYPEC_POLARITY - EXTCON_PROP_USB_SS (SuperSpeed) - EXTCON_PROP_DISP_HPD (Hot Plug Detect) 4. Add the new type of external connector. - EXTCON_DISP_DP : Display Port - EXTCON_DISP_HMD : Head Mounted Device - EXTCON_CHG_WPT : Wireless Power Transfer device 5. Add the new extcon driver. - Qualcomm SPMI PMIC USB id detection driver detects whether EXTCON_USB_HOST is attached or detached. (extcon-qcom-spmi-mis.c) 6. Remove the usage of extcon_update_state() and old extcon_set_state() - Both extcon_update_state() and extcon_set_state() should change the state of all external connectors with bit masking handling. It may occur the problem. Instead, extcon provides the extcon_set/get_state() functions. 7. Fix the minor issues on extcon drivers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJX15NdAAoJEJzN3yze689THBUP/jnchjajptYuKY/Y/TkDfdHF ffEQX/V4lJ1rZfQe4TOWf/f4Pa/+AssFXlOH08in9mAqphsYVZb6d05yVxZgK2cA 3C0JH2SigpcnpIbxDAmz+IuJCzA9BIyhj3+qqzo72vRE8lS+CBQk0jsuQgbNVRG+ T9Dg7GvqcWOpvlGXFhMszznYMQIXfnYSuY4JbT5YjEN6k7qC+fYPwyXN7iJfZ70r B9mQwjynimE82VV7xfeYwUhoXCSu+MS8YlfxayWP7p8//kNyID17LjCZttH/deF4 bMr+PfUmn3Uv8PoOQL+hONRruVNbzp8fPaBERk1G/7CS9Gtf1jZUHYyG4Hn7cmpt i/WAvFc2aDJyZEzVRborbnZ4KAwas8ftfNy13fIzsXKwPg6FKoIGoj8+4cxO61fc rP+GDWpCOheCMLI9oRuXM1Ub6f8z5uZl3xDgWuGb2LCp7uquIC483AaZAKqpPNll Xo4oLFTWecyA0lt1FsHC/qTbSW104VtYeQv644zsDTMyVvarQ4daf9lce9Qw5dYc jM2EN8CYHw38jpgFquNXqRArNoTbdsLWQ9shv6MlQNguX8hao6lZZgFtWYq9j3dj I1YjkyyYyr5VwF+xUjTQFrLWXPZ77/7LRwgeifcIPI3MC+tYFhhBojIT709ri8L/ QwgUF2ukSoPxPVT/jUVv =LF4N -----END PGP SIGNATURE----- Merge tag 'extcon-next-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into usb-testing Chanwoo writes: Update extcon for 4.9 Detailed description for this pull request: 1. Support the extcon property and add the synchronization APIs. - This feature supports the extcon property for external connector because each external connector might have the property according to the H/W design. - The property name should keep the following style. : EXTCON_PROP_USB_[property_name] : EXTCON_PROP_CHG_[property_name] : EXTCON_PROP_JACK_[property_name] : EXTCON_PROP_DISP_[property_name] - Add the new extcon APIs to support the extcon property. : extcon_set_property() : extcon_get_property() : extcon_set_property_capability() : extcon_get_property_capability() - Add the new synchronization extcon APIs. : This feature adds the synchronization extcon APIs to support the noti for both state and property. When extcon_*_sync() functions is called, the extcon informs the information from extcon provider to extcon client. The extcon driver may need to change the both state and multiple properties at the same time. After setting the data of a external connector, the extcon send the notification to client driver with the extcon_*_sync(). : extcon_sync() : extcon_set_state_sync() : extcon_set_property_sync() - Change the name of existing APIs. : extcon_set_cable_state_() -> extcon_set_cable() : extcon_get_cable_state_() -> extcon_get_cable() 2. Add the extcon type to group the connector into five category. - EXTCON_TYPE_USB : USB connector - EXTCON_TYPE_CHG : Charger connector - EXTCON_TYPE_JACK : Jack connector - EXTCON_TYPE_DISP : Display connector - EXTCON_TYPE_MISC : Miscellaneous connector 3. Add the new property for external connector. - EXTCON_PROP_USB_VBUS - EXTCON_PROP_USB_TYPEC_POLARITY - EXTCON_PROP_USB_SS (SuperSpeed) - EXTCON_PROP_DISP_HPD (Hot Plug Detect) 4. Add the new type of external connector. - EXTCON_DISP_DP : Display Port - EXTCON_DISP_HMD : Head Mounted Device - EXTCON_CHG_WPT : Wireless Power Transfer device 5. Add the new extcon driver. - Qualcomm SPMI PMIC USB id detection driver detects whether EXTCON_USB_HOST is attached or detached. (extcon-qcom-spmi-mis.c) 6. Remove the usage of extcon_update_state() and old extcon_set_state() - Both extcon_update_state() and extcon_set_state() should change the state of all external connectors with bit masking handling. It may occur the problem. Instead, extcon provides the extcon_set/get_state() functions. 7. Fix the minor issues on extcon drivers.
2024-12-16 09:13:55 +08:00 · 2016-09-13 17:17:31 +02:00 · 2016-09-13 17:17:31 +02:00 · 4d719209be
commit 4d719209be
parent 050bc4e846 38085c987f
20 changed files with 1151 additions and 305 deletions
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
@ -0,0 +1,41 @@
+Qualcomm's PM8941 USB ID Extcon device
+
+Some Qualcomm PMICs have a "misc" module that can be used to detect when
+the USB ID pin has been pulled low or high.
+
+PROPERTIES
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,pm8941-misc";
+
+- reg:
+    Usage: required
+    Value type: <u32>
+    Definition: Should contain the offset to the misc address space
+
+- interrupts:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: Should contain the usb id interrupt
+
+- interrupt-names:
+    Usage: required
+    Value type: <stringlist>
+    Definition: Should contain the string "usb_id" for the usb id interrupt
+
+Example:
+
+	pmic {
+		usb_id: misc@900 {
+			compatible = "qcom,pm8941-misc";
+			reg = <0x900>;
+			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "usb_id";
+		};
+	}
+
+	usb-controller {
+		extcon = <&usb_id>;
+	};
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@ -96,6 +96,12 @@ config EXTCON_PALMAS
 	  Say Y here to enable support for USB peripheral and USB host
 	  detection by palmas usb.

+config EXTCON_QCOM_SPMI_MISC
+	tristate "Qualcomm USB extcon support"
+	help
+	  Say Y here to enable SPMI PMIC based USB cable detection
+	  support on Qualcomm PMICs such as PM8941.
+
 config EXTCON_RT8973A
 	tristate "Richtek RT8973A EXTCON support"
 	depends on I2C
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@ -14,6 +14,7 @@ obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
 obj-$(CONFIG_EXTCON_MAX77843)	+= extcon-max77843.o
 obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
 obj-$(CONFIG_EXTCON_PALMAS)	+= extcon-palmas.o
+obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o
 obj-$(CONFIG_EXTCON_RT8973A)	+= extcon-rt8973a.o
 obj-$(CONFIG_EXTCON_SM5502)	+= extcon-sm5502.o
 obj-$(CONFIG_EXTCON_USB_GPIO)	+= extcon-usb-gpio.o
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@ -3,6 +3,9 @@
 *
 * Analog Jack extcon driver with ADC-based detection capability.
 *
+ * Copyright (C) 2016 Samsung Electronics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
 * Copyright (C) 2012 Samsung Electronics
 * MyungJoo Ham <myungjoo.ham@samsung.com>
 *
@ -58,7 +61,7 @@ static void adc_jack_handler(struct work_struct *work)
 	struct adc_jack_data *data = container_of(to_delayed_work(work),
 			struct adc_jack_data,
 			handler);
-	u32 state = 0;
+	struct adc_jack_cond *def;
 	int ret, adc_val;
 	int i;

@ -70,17 +73,18 @@ static void adc_jack_handler(struct work_struct *work)

 	/* Get state from adc value with adc_conditions */
 	for (i = 0; i < data->num_conditions; i++) {
-		struct adc_jack_cond *def = &data->adc_conditions[i];
-		if (!def->state)
-			break;
+		def = &data->adc_conditions[i];
 		if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
-			state = def->state;
-			break;
+			extcon_set_state_sync(data->edev, def->id, true);
+			return;
 		}
 	}
-	/* if no def has met, it means state = 0 (no cables attached) */

-	extcon_set_state(data->edev, state);
+	/* Set the detached state if adc value is not included in the range */
+	for (i = 0; i < data->num_conditions; i++) {
+		def = &data->adc_conditions[i];
+		extcon_set_state_sync(data->edev, def->id, false);
+	}
 }

 static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
@ -114,16 +118,14 @@ static int adc_jack_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}

-	if (!pdata->adc_conditions ||
-			!pdata->adc_conditions[0].state) {
+	if (!pdata->adc_conditions) {
 		dev_err(&pdev->dev, "error: adc_conditions not defined.\n");
 		return -EINVAL;
 	}
 	data->adc_conditions = pdata->adc_conditions;

 	/* Check the length of array and set num_conditions */
-	for (i = 0; data->adc_conditions[i].state; i++)
-		;
+	for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++);
 	data->num_conditions = i;

 	data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel);
@ -158,6 +160,7 @@ static int adc_jack_probe(struct platform_device *pdev)
 	if (data->wakeup_source)
 		device_init_wakeup(&pdev->dev, 1);

+	adc_jack_handler(&data->handler.work);
 	return 0;
 }

--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@ -183,7 +183,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
 		if (clamp)
 			val = ARIZONA_RMV_SHRT_HP1L;
 		break;
-	};
+	}

 	snd_soc_dapm_mutex_lock(arizona->dapm);

@ -614,7 +614,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	}

 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
+	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
 	if (ret < 0) {
 		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 			ret);
@ -649,7 +649,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	else
 		report = EXTCON_JACK_HEADPHONE;

-	ret = extcon_set_cable_state_(info->edev, report, true);
+	ret = extcon_set_state_sync(info->edev, report, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report HP/line: %d\n",
 			ret);
@ -732,7 +732,7 @@ err:
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);

 	/* Just report headphone */
-	ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
+	ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);

@ -789,7 +789,7 @@ err:
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);

 	/* Just report headphone */
-	ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
+	ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);

@ -829,7 +829,7 @@ static void arizona_micd_detect(struct work_struct *work)
 	mutex_lock(&info->lock);

 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
+	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
 	if (ret < 0) {
 		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 				ret);
@ -914,7 +914,7 @@ static void arizona_micd_detect(struct work_struct *work)

 		arizona_identify_headphone(info);

-		ret = extcon_set_cable_state_(info->edev,
+		ret = extcon_set_state_sync(info->edev,
 					      EXTCON_JACK_MICROPHONE, true);
 		if (ret != 0)
 			dev_err(arizona->dev, "Headset report failed: %d\n",
@ -1108,7 +1108,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)

 	if (info->last_jackdet == present) {
 		dev_dbg(arizona->dev, "Detected jack\n");
-		ret = extcon_set_cable_state_(info->edev,
+		ret = extcon_set_state_sync(info->edev,
 					      EXTCON_MECHANICAL, true);

 		if (ret != 0)
@ -1149,10 +1149,13 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 					 info->micd_ranges[i].key, 0);
 		input_sync(info->input);

-		ret = extcon_update_state(info->edev, 0xffffffff, 0);
-		if (ret != 0)
-			dev_err(arizona->dev, "Removal report failed: %d\n",
-				ret);
+		for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
+			ret = extcon_set_state_sync(info->edev,
+					arizona_cable[i], false);
+			if (ret != 0)
+				dev_err(arizona->dev,
+					"Removal report failed: %d\n", ret);
+		}

 		regmap_update_bits(arizona->regmap,
 				   ARIZONA_JACK_DETECT_DEBOUNCE,
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@ -189,19 +189,19 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)

 	switch (chrg_type) {
 	case DET_STAT_SDP:
-		dev_dbg(info->dev, "sdp cable is connecetd\n");
+		dev_dbg(info->dev, "sdp cable is connected\n");
 		notify_otg = true;
 		notify_charger = true;
 		cable = EXTCON_CHG_USB_SDP;
 		break;
 	case DET_STAT_CDP:
-		dev_dbg(info->dev, "cdp cable is connecetd\n");
+		dev_dbg(info->dev, "cdp cable is connected\n");
 		notify_otg = true;
 		notify_charger = true;
 		cable = EXTCON_CHG_USB_CDP;
 		break;
 	case DET_STAT_DCP:
-		dev_dbg(info->dev, "dcp cable is connecetd\n");
+		dev_dbg(info->dev, "dcp cable is connected\n");
 		notify_charger = true;
 		cable = EXTCON_CHG_USB_DCP;
 		break;
@ -226,7 +226,7 @@ notify_otg:
 	}

 	if (notify_charger)
-		extcon_set_cable_state_(info->edev, cable, vbus_attach);
+		extcon_set_state_sync(info->edev, cable, vbus_attach);

 	/* Clear the flags on disconnect event */
 	if (!vbus_attach)
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@ -49,7 +49,7 @@ static void gpio_extcon_work(struct work_struct *work)
 	state = gpiod_get_value_cansleep(data->id_gpiod);
 	if (data->pdata->gpio_active_low)
 		state = !state;
-	extcon_set_state(data->edev, state);
+	extcon_set_state_sync(data->edev, data->pdata->extcon_id, state);
 }

 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
--- a/drivers/extcon/extcon-max14577.c
+++ b/drivers/extcon/extcon-max14577.c
@ -3,7 +3,7 @@
 *
 * Copyright (C) 2013,2014 Samsung Electronics
 * Chanwoo Choi <cw00.choi@samsung.com>
- * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ * Krzysztof Kozlowski <krzk@kernel.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@ -357,7 +357,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 	if (ret < 0)
 		return ret;

-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);

 	return 0;
 }
@ -454,24 +454,24 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info)
 		if (ret < 0)
 			return ret;

-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_NONE:
@ -791,6 +791,6 @@ static struct platform_driver max14577_muic_driver = {
 module_platform_driver(max14577_muic_driver);

 MODULE_DESCRIPTION("Maxim 14577/77836 Extcon driver");
-MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <krzk@kernel.org>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:extcon-max14577");
--- a/drivers/extcon/extcon-max3355.c
+++ b/drivers/extcon/extcon-max3355.c
@ -39,16 +39,16 @@ static irqreturn_t max3355_id_irq(int irq, void *dev_id)
 		 * As we don't have event for USB peripheral cable attached,
 		 * we simulate USB peripheral attach here.
 		 */
-		extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, false);
-		extcon_set_cable_state_(data->edev, EXTCON_USB, true);
+		extcon_set_state_sync(data->edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(data->edev, EXTCON_USB, true);
 	} else {
 		/*
 		 * ID = 0 means USB HOST cable attached.
 		 * As we don't have event for USB peripheral cable detached,
 		 * we simulate USB peripheral detach here.
 		 */
-		extcon_set_cable_state_(data->edev, EXTCON_USB, false);
-		extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(data->edev, EXTCON_USB, false);
+		extcon_set_state_sync(data->edev, EXTCON_USB_HOST, true);
 	}

 	return IRQ_HANDLED;
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@ -505,8 +505,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 		if (ret < 0)
 			return ret;

-		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		goto out;
 	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
 		dock_id = EXTCON_DOCK;
@ -514,8 +514,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
 		dock_id = EXTCON_DOCK;
 		if (!attached) {
-			extcon_set_cable_state_(info->edev, EXTCON_USB, false);
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+			extcon_set_state_sync(info->edev, EXTCON_USB, false);
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 						false);
 		}
 		break;
@ -530,7 +530,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 					attached);
 	if (ret < 0)
 		return ret;
-	extcon_set_cable_state_(info->edev, dock_id, attached);
+	extcon_set_state_sync(info->edev, dock_id, attached);

 out:
 	return 0;
@ -596,7 +596,7 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 						attached);
 		if (ret < 0)
 			return ret;
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77693_MUIC_GND_AV_CABLE_LOAD:
 		/* Audio Video Cable with load, PATH:AUDIO */
@ -604,14 +604,14 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 						attached);
 		if (ret < 0)
 			return ret;
-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	case MAX77693_MUIC_GND_MHL:
 	case MAX77693_MUIC_GND_MHL_VB:
 		/* MHL or MHL with USB/TA cable */
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s cable of gnd type\n",
@ -653,7 +653,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 	if (ret < 0)
 		return ret;

-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);

 	return 0;
 }
@ -807,10 +807,10 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			 * - Support charging through micro-usb port without
 			 *   data connection
 			 */
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						attached);
 			if (!cable_attached)
-				extcon_set_cable_state_(info->edev,
+				extcon_set_state_sync(info->edev,
 					EXTCON_DISP_MHL, cable_attached);
 			break;
 		}
@ -834,13 +834,13 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			 * - Support charging through micro-usb port without
 			 *   data connection.
 			 */
-			extcon_set_cable_state_(info->edev, EXTCON_USB,
+			extcon_set_state_sync(info->edev, EXTCON_USB,
 						attached);
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 						attached);

 			if (!cable_attached)
-				extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+				extcon_set_state_sync(info->edev, EXTCON_DOCK,
 							cable_attached);
 			break;
 		case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
@ -869,9 +869,9 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			if (ret < 0)
 				return ret;

-			extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+			extcon_set_state_sync(info->edev, EXTCON_DOCK,
 						attached);
-			extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL,
+			extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
 						attached);
 			break;
 		}
@ -905,28 +905,28 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			if (ret < 0)
 				return ret;

-			extcon_set_cable_state_(info->edev, EXTCON_USB,
+			extcon_set_state_sync(info->edev, EXTCON_USB,
 						attached);
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 						attached);
 			break;
 		case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
 			/* Only TA cable */
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						attached);
 			break;
 		}
 		break;
 	case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@ -346,7 +346,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;

-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77843_MUIC_GND_MHL_VB:
 	case MAX77843_MUIC_GND_MHL:
@ -356,7 +356,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;

-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
@ -392,7 +392,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
 	if (ret < 0)
 		return ret;

-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);

 	return 0;
 }
@ -486,8 +486,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;

-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_DOWNSTREAM:
@ -497,7 +497,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;

-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_DEDICATED:
@ -507,7 +507,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;

-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_500MA:
@ -517,7 +517,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;

-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_1A:
@ -527,7 +527,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;

-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_GND:
@ -536,10 +536,10 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)

 		/* Charger cable on MHL accessory is attach or detach */
 		if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						true);
 		else if (gnd_type == MAX77843_MUIC_GND_MHL)
-			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						false);
 		break;
 	case MAX77843_MUIC_CHG_NONE:
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@ -331,11 +331,11 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,

 	switch (usb_type) {
 	case MAX8997_USB_HOST:
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX8997_USB_DEVICE:
-		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);
 		break;
 	default:
@ -361,7 +361,7 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info,
 	switch (cable_type) {
 	case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
 	case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
-		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s dock device\n",
@ -384,7 +384,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 		return ret;
 	}

-	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+	extcon_set_state_sync(info->edev, EXTCON_JIG, attached);

 	return 0;
 }
@ -406,7 +406,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info)
 			return ret;
 		break;
 	case MAX8997_MUIC_ADC_MHL:
-		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+		extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
@ -489,19 +489,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info)
 		}
 		break;
 	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_1A:
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	default:
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@ -61,7 +61,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 	if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) {
 		if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
-			extcon_set_cable_state_(edev, EXTCON_USB, true);
+			extcon_set_state_sync(edev, EXTCON_USB, true);
 			dev_info(palmas_usb->dev, "USB cable is attached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
@ -70,7 +70,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 	} else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) {
 		if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-			extcon_set_cable_state_(edev, EXTCON_USB, false);
+			extcon_set_state_sync(edev, EXTCON_USB, false);
 			dev_info(palmas_usb->dev, "USB cable is detached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
@ -98,7 +98,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
 	} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
@ -106,17 +106,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
 				(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
 	}

@ -137,10 +137,10 @@ static void palmas_gpio_id_detect(struct work_struct *work)
 	id = gpiod_get_value_cansleep(palmas_usb->id_gpiod);

 	if (id) {
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else {
-		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
 	}
 }
--- a/drivers/extcon/extcon-qcom-spmi-misc.c
+++ b/drivers/extcon/extcon-qcom-spmi-misc.c
@ -0,0 +1,170 @@
+/**
+ * extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID
+ *				detection based on extcon-usb-gpio.c.
+ *
+ * Copyright (C) 2016 Linaro, Ltd.
+ * Stephen Boyd <stephen.boyd@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/extcon.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define USB_ID_DEBOUNCE_MS	5	/* ms */
+
+struct qcom_usb_extcon_info {
+	struct extcon_dev *edev;
+	int irq;
+	struct delayed_work wq_detcable;
+	unsigned long debounce_jiffies;
+};
+
+static const unsigned int qcom_usb_extcon_cable[] = {
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static void qcom_usb_extcon_detect_cable(struct work_struct *work)
+{
+	bool id;
+	int ret;
+	struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work),
+						    struct qcom_usb_extcon_info,
+						    wq_detcable);
+
+	/* check ID and update cable state */
+	ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id);
+	if (ret)
+		return;
+
+	extcon_set_state(info->edev, EXTCON_USB_HOST, !id);
+}
+
+static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id)
+{
+	struct qcom_usb_extcon_info *info = dev_id;
+
+	queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
+			   info->debounce_jiffies);
+
+	return IRQ_HANDLED;
+}
+
+static int qcom_usb_extcon_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct qcom_usb_extcon_info *info;
+	int ret;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->edev = devm_extcon_dev_allocate(dev, qcom_usb_extcon_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(dev, "failed to allocate extcon device\n");
+		return -ENOMEM;
+	}
+
+	ret = devm_extcon_dev_register(dev, info->edev);
+	if (ret < 0) {
+		dev_err(dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
+	INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
+
+	info->irq = platform_get_irq_byname(pdev, "usb_id");
+	if (info->irq < 0)
+		return info->irq;
+
+	ret = devm_request_threaded_irq(dev, info->irq, NULL,
+					qcom_usb_irq_handler,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					pdev->name, info);
+	if (ret < 0) {
+		dev_err(dev, "failed to request handler for ID IRQ\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, info);
+	device_init_wakeup(dev, 1);
+
+	/* Perform initial detection */
+	qcom_usb_extcon_detect_cable(&info->wq_detcable.work);
+
+	return 0;
+}
+
+static int qcom_usb_extcon_remove(struct platform_device *pdev)
+{
+	struct qcom_usb_extcon_info *info = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&info->wq_detcable);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int qcom_usb_extcon_suspend(struct device *dev)
+{
+	struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (device_may_wakeup(dev))
+		ret = enable_irq_wake(info->irq);
+
+	return ret;
+}
+
+static int qcom_usb_extcon_resume(struct device *dev)
+{
+	struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (device_may_wakeup(dev))
+		ret = disable_irq_wake(info->irq);
+
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(qcom_usb_extcon_pm_ops,
+			 qcom_usb_extcon_suspend, qcom_usb_extcon_resume);
+
+static const struct of_device_id qcom_usb_extcon_dt_match[] = {
+	{ .compatible = "qcom,pm8941-misc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_usb_extcon_dt_match);
+
+static struct platform_driver qcom_usb_extcon_driver = {
+	.probe		= qcom_usb_extcon_probe,
+	.remove		= qcom_usb_extcon_remove,
+	.driver		= {
+		.name	= "extcon-pm8941-misc",
+		.pm	= &qcom_usb_extcon_pm_ops,
+		.of_match_table = qcom_usb_extcon_dt_match,
+	},
+};
+module_platform_driver(qcom_usb_extcon_driver);
+
+MODULE_DESCRIPTION("QCOM USB ID extcon driver");
+MODULE_AUTHOR("Stephen Boyd <stephen.boyd@linaro.org>");
+MODULE_LICENSE("GPL v2");
--- a/drivers/extcon/extcon-rt8973a.c
+++ b/drivers/extcon/extcon-rt8973a.c
@ -398,9 +398,9 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 		return ret;

 	/* Change the state of external accessory */
-	extcon_set_cable_state_(info->edev, id, attached);
+	extcon_set_state_sync(info->edev, id, attached);
 	if (id == EXTCON_USB)
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);

 	return 0;
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@ -411,9 +411,9 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 		return ret;

 	/* Change the state of external accessory */
-	extcon_set_cable_state_(info->edev, id, attached);
+	extcon_set_state_sync(info->edev, id, attached);
 	if (id == EXTCON_USB)
-		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 					attached);

 	return 0;
--- a/drivers/extcon/extcon-usb-gpio.c
+++ b/drivers/extcon/extcon-usb-gpio.c
@ -63,16 +63,16 @@ static void usb_extcon_detect_cable(struct work_struct *work)
 		 * As we don't have event for USB peripheral cable attached,
 		 * we simulate USB peripheral attach here.
 		 */
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false);
-		extcon_set_cable_state_(info->edev, EXTCON_USB, true);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(info->edev, EXTCON_USB, true);
 	} else {
 		/*
 		 * ID = 0 means USB HOST cable attached.
 		 * As we don't have event for USB peripheral cable detached,
 		 * we simulate USB peripheral detach here.
 		 */
-		extcon_set_cable_state_(info->edev, EXTCON_USB, false);
-		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(info->edev, EXTCON_USB, false);
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true);
 	}
 }

--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@ -38,43 +38,159 @@
 #define SUPPORTED_CABLE_MAX	32
 #define CABLE_NAME_MAX		30

-static const char *extcon_name[] =  {
-	[EXTCON_NONE]			= "NONE",
+struct __extcon_info {
+	unsigned int type;
+	unsigned int id;
+	const char *name;
+
+} extcon_info[] = {
+	[EXTCON_NONE] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_NONE,
+		.name = "NONE",
+	},

 	/* USB external connector */
-	[EXTCON_USB]			= "USB",
-	[EXTCON_USB_HOST]		= "USB-HOST",
+	[EXTCON_USB] = {
+		.type = EXTCON_TYPE_USB,
+		.id = EXTCON_USB,
+		.name = "USB",
+	},
+	[EXTCON_USB_HOST] = {
+		.type = EXTCON_TYPE_USB,
+		.id = EXTCON_USB_HOST,
+		.name = "USB_HOST",
+	},

 	/* Charging external connector */
-	[EXTCON_CHG_USB_SDP]		= "SDP",
-	[EXTCON_CHG_USB_DCP]		= "DCP",
-	[EXTCON_CHG_USB_CDP]		= "CDP",
-	[EXTCON_CHG_USB_ACA]		= "ACA",
-	[EXTCON_CHG_USB_FAST]		= "FAST-CHARGER",
-	[EXTCON_CHG_USB_SLOW]		= "SLOW-CHARGER",
+	[EXTCON_CHG_USB_SDP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_SDP,
+		.name = "SDP",
+	},
+	[EXTCON_CHG_USB_DCP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_DCP,
+		.name = "DCP",
+	},
+	[EXTCON_CHG_USB_CDP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_CDP,
+		.name = "CDP",
+	},
+	[EXTCON_CHG_USB_ACA] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_ACA,
+		.name = "ACA",
+	},
+	[EXTCON_CHG_USB_FAST] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_FAST,
+		.name = "FAST-CHARGER",
+	},
+	[EXTCON_CHG_USB_SLOW] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_SLOW,
+		.name = "SLOW-CHARGER",
+	},
+	[EXTCON_CHG_WPT] = {
+		.type = EXTCON_TYPE_CHG,
+		.id = EXTCON_CHG_WPT,
+		.name = "WPT",
+	},

 	/* Jack external connector */
-	[EXTCON_JACK_MICROPHONE]	= "MICROPHONE",
-	[EXTCON_JACK_HEADPHONE]		= "HEADPHONE",
-	[EXTCON_JACK_LINE_IN]		= "LINE-IN",
-	[EXTCON_JACK_LINE_OUT]		= "LINE-OUT",
-	[EXTCON_JACK_VIDEO_IN]		= "VIDEO-IN",
-	[EXTCON_JACK_VIDEO_OUT]		= "VIDEO-OUT",
-	[EXTCON_JACK_SPDIF_IN]		= "SPDIF-IN",
-	[EXTCON_JACK_SPDIF_OUT]		= "SPDIF-OUT",
+	[EXTCON_JACK_MICROPHONE] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_MICROPHONE,
+		.name = "MICROPHONE",
+	},
+	[EXTCON_JACK_HEADPHONE] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_HEADPHONE,
+		.name = "HEADPHONE",
+	},
+	[EXTCON_JACK_LINE_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_LINE_IN,
+		.name = "LINE-IN",
+	},
+	[EXTCON_JACK_LINE_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_LINE_OUT,
+		.name = "LINE-OUT",
+	},
+	[EXTCON_JACK_VIDEO_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_VIDEO_IN,
+		.name = "VIDEO-IN",
+	},
+	[EXTCON_JACK_VIDEO_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_VIDEO_OUT,
+		.name = "VIDEO-OUT",
+	},
+	[EXTCON_JACK_SPDIF_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_SPDIF_IN,
+		.name = "SPDIF-IN",
+	},
+	[EXTCON_JACK_SPDIF_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_SPDIF_OUT,
+		.name = "SPDIF-OUT",
+	},

 	/* Display external connector */
-	[EXTCON_DISP_HDMI]		= "HDMI",
-	[EXTCON_DISP_MHL]		= "MHL",
-	[EXTCON_DISP_DVI]		= "DVI",
-	[EXTCON_DISP_VGA]		= "VGA",
+	[EXTCON_DISP_HDMI] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_HDMI,
+		.name = "HDMI",
+	},
+	[EXTCON_DISP_MHL] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_MHL,
+		.name = "MHL",
+	},
+	[EXTCON_DISP_DVI] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_DVI,
+		.name = "DVI",
+	},
+	[EXTCON_DISP_VGA] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_VGA,
+		.name = "VGA",
+	},
+	[EXTCON_DISP_DP] = {
+		.type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
+		.id = EXTCON_DISP_DP,
+		.name = "DP",
+	},
+	[EXTCON_DISP_HMD] = {
+		.type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
+		.id = EXTCON_DISP_HMD,
+		.name = "HMD",
+	},

 	/* Miscellaneous external connector */
-	[EXTCON_DOCK]			= "DOCK",
-	[EXTCON_JIG]			= "JIG",
-	[EXTCON_MECHANICAL]		= "MECHANICAL",
+	[EXTCON_DOCK] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_DOCK,
+		.name = "DOCK",
+	},
+	[EXTCON_JIG] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_JIG,
+		.name = "JIG",
+	},
+	[EXTCON_MECHANICAL] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_MECHANICAL,
+		.name = "MECHANICAL",
+	},

-	NULL,
+	{ /* sentinel */ }
 };

 /**
@ -95,6 +211,16 @@ struct extcon_cable {
 	struct device_attribute attr_state;

 	struct attribute *attrs[3]; /* to be fed to attr_g.attrs */
+
+	union extcon_property_value usb_propval[EXTCON_PROP_USB_CNT];
+	union extcon_property_value chg_propval[EXTCON_PROP_CHG_CNT];
+	union extcon_property_value jack_propval[EXTCON_PROP_JACK_CNT];
+	union extcon_property_value disp_propval[EXTCON_PROP_DISP_CNT];
+
+	unsigned long usb_bits[BITS_TO_LONGS(EXTCON_PROP_USB_CNT)];
+	unsigned long chg_bits[BITS_TO_LONGS(EXTCON_PROP_CHG_CNT)];
+	unsigned long jack_bits[BITS_TO_LONGS(EXTCON_PROP_JACK_CNT)];
+	unsigned long disp_bits[BITS_TO_LONGS(EXTCON_PROP_DISP_CNT)];
 };

 static struct class *extcon_class;
@ -147,14 +273,93 @@ static int find_cable_index_by_id(struct extcon_dev *edev, const unsigned int id
 	return -EINVAL;
 }

-static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached)
+static int get_extcon_type(unsigned int prop)
 {
-	if (((prev >> idx) & 0x1) != ((new >> idx) & 0x1)) {
-		*attached = ((new >> idx) & 0x1) ? true : false;
-		return true;
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		return EXTCON_TYPE_USB;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		return EXTCON_TYPE_CHG;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		return EXTCON_TYPE_JACK;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		return EXTCON_TYPE_DISP;
+	default:
+		return -EINVAL;
+	}
+}
+
+static bool is_extcon_attached(struct extcon_dev *edev, unsigned int index)
+{
+	return !!(edev->state & BIT(index));
+}
+
+static bool is_extcon_changed(struct extcon_dev *edev, int index,
+				bool new_state)
+{
+	int state = !!(edev->state & BIT(index));
+	return (state != new_state);
+}
+
+static bool is_extcon_property_supported(unsigned int id, unsigned int prop)
+{
+	int type;
+
+	/* Check whether the property is supported or not. */
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return false;
+
+	/* Check whether a specific extcon id supports the property or not. */
+	return !!(extcon_info[id].type & type);
+}
+
+static int is_extcon_property_capability(struct extcon_dev *edev,
+				unsigned int id, int index,unsigned int prop)
+{
+	struct extcon_cable *cable;
+	int type, ret;
+
+	/* Check whether the property is supported or not. */
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return type;
+
+	cable = &edev->cables[index];
+
+	switch (type) {
+	case EXTCON_TYPE_USB:
+		ret = test_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits);
+		break;
+	case EXTCON_TYPE_CHG:
+		ret = test_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits);
+		break;
+	case EXTCON_TYPE_JACK:
+		ret = test_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits);
+		break;
+	case EXTCON_TYPE_DISP:
+		ret = test_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits);
+		break;
+	default:
+		ret = -EINVAL;
 	}

-	return false;
+	return ret;
+}
+
+static void init_property(struct extcon_dev *edev, unsigned int id, int index)
+{
+	unsigned int type = extcon_info[id].type;
+	struct extcon_cable *cable = &edev->cables[index];
+
+	if (EXTCON_TYPE_USB & type)
+		memset(cable->usb_propval, 0, sizeof(cable->usb_propval));
+	if (EXTCON_TYPE_CHG & type)
+		memset(cable->chg_propval, 0, sizeof(cable->chg_propval));
+	if (EXTCON_TYPE_JACK & type)
+		memset(cable->jack_propval, 0, sizeof(cable->jack_propval));
+	if (EXTCON_TYPE_DISP & type)
+		memset(cable->disp_propval, 0, sizeof(cable->disp_propval));
 }

 static ssize_t state_show(struct device *dev, struct device_attribute *attr,
@ -168,32 +373,13 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr,

 	for (i = 0; i < edev->max_supported; i++) {
 		count += sprintf(buf + count, "%s=%d\n",
-				extcon_name[edev->supported_cable[i]],
+				extcon_info[edev->supported_cable[i]].name,
 				 !!(edev->state & (1 << i)));
 	}

 	return count;
 }
-
-static ssize_t state_store(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	u32 state;
-	ssize_t ret = 0;
-	struct extcon_dev *edev = dev_get_drvdata(dev);
-
-	ret = sscanf(buf, "0x%x", &state);
-	if (ret == 0)
-		ret = -EINVAL;
-	else
-		ret = extcon_set_state(edev, state);
-
-	if (ret < 0)
-		return ret;
-
-	return count;
-}
-static DEVICE_ATTR_RW(state);
+static DEVICE_ATTR_RO(state);

 static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 		char *buf)
@ -212,7 +398,7 @@ static ssize_t cable_name_show(struct device *dev,
 	int i = cable->cable_index;

 	return sprintf(buf, "%s\n",
-			extcon_name[cable->edev->supported_cable[i]]);
+			extcon_info[cable->edev->supported_cable[i]].name);
 }

 static ssize_t cable_state_show(struct device *dev,
@ -224,26 +410,17 @@ static ssize_t cable_state_show(struct device *dev,
 	int i = cable->cable_index;

 	return sprintf(buf, "%d\n",
-		       extcon_get_cable_state_(cable->edev,
-					       cable->edev->supported_cable[i]));
+		extcon_get_state(cable->edev, cable->edev->supported_cable[i]));
 }

 /**
- * extcon_update_state() - Update the cable attach states of the extcon device
- *			   only for the masked bits.
- * @edev:	the extcon device
- * @mask:	the bit mask to designate updated bits.
- * @state:	new cable attach status for @edev
+ * extcon_sync()	- Synchronize the states for both the attached/detached
+ * @edev:		the extcon device that has the cable.
 *
- * Changing the state sends uevent with environment variable containing
- * the name of extcon device (envp[0]) and the state output (envp[1]).
- * Tizen uses this format for extcon device to get events from ports.
- * Android uses this format as well.
- *
- * Note that the notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
+ * This function send a notification to synchronize the all states of a
+ * specific external connector
 */
-int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
+int extcon_sync(struct extcon_dev *edev, unsigned int id)
 {
 	char name_buf[120];
 	char state_buf[120];
@ -252,100 +429,8 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 	int env_offset = 0;
 	int length;
 	int index;
+	int state;
 	unsigned long flags;
-	bool attached;
-
-	if (!edev)
-		return -EINVAL;
-
-	spin_lock_irqsave(&edev->lock, flags);
-
-	if (edev->state != ((edev->state & ~mask) | (state & mask))) {
-		u32 old_state;
-
-		if (check_mutually_exclusive(edev, (edev->state & ~mask) |
-						   (state & mask))) {
-			spin_unlock_irqrestore(&edev->lock, flags);
-			return -EPERM;
-		}
-
-		old_state = edev->state;
-		edev->state &= ~mask;
-		edev->state |= state & mask;
-
-		for (index = 0; index < edev->max_supported; index++) {
-			if (is_extcon_changed(old_state, edev->state, index,
-					      &attached))
-				raw_notifier_call_chain(&edev->nh[index],
-							attached, edev);
-		}
-
-		/* This could be in interrupt handler */
-		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
-		if (prop_buf) {
-			length = name_show(&edev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(name_buf, sizeof(name_buf),
-					"NAME=%s", prop_buf);
-				envp[env_offset++] = name_buf;
-			}
-			length = state_show(&edev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(state_buf, sizeof(state_buf),
-					"STATE=%s", prop_buf);
-				envp[env_offset++] = state_buf;
-			}
-			envp[env_offset] = NULL;
-			/* Unlock early before uevent */
-			spin_unlock_irqrestore(&edev->lock, flags);
-
-			kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
-			free_page((unsigned long)prop_buf);
-		} else {
-			/* Unlock early before uevent */
-			spin_unlock_irqrestore(&edev->lock, flags);
-
-			dev_err(&edev->dev, "out of memory in extcon_set_state\n");
-			kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
-		}
-	} else {
-		/* No changes */
-		spin_unlock_irqrestore(&edev->lock, flags);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(extcon_update_state);
-
-/**
- * extcon_set_state() - Set the cable attach states of the extcon device.
- * @edev:	the extcon device
- * @state:	new cable attach status for @edev
- *
- * Note that notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
- */
-int extcon_set_state(struct extcon_dev *edev, u32 state)
-{
-	if (!edev)
-		return -EINVAL;
-
-	return extcon_update_state(edev, 0xffffffff, state);
-}
-EXPORT_SYMBOL_GPL(extcon_set_state);
-
-/**
- * extcon_get_cable_state_() - Get the status of a specific cable.
- * @edev:	the extcon device that has the cable.
- * @id:		the unique id of each external connector in extcon enumeration.
- */
-int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
-{
-	int index;

 	if (!edev)
 		return -EINVAL;
@ -354,26 +439,92 @@ int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
 	if (index < 0)
 		return index;

-	if (edev->max_supported && edev->max_supported <= index)
-		return -EINVAL;
+	spin_lock_irqsave(&edev->lock, flags);

-	return !!(edev->state & (1 << index));
+	state = !!(edev->state & BIT(index));
+	raw_notifier_call_chain(&edev->nh[index], state, edev);
+
+	/* This could be in interrupt handler */
+	prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
+	if (!prop_buf) {
+		/* Unlock early before uevent */
+		spin_unlock_irqrestore(&edev->lock, flags);
+
+		dev_err(&edev->dev, "out of memory in extcon_set_state\n");
+		kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
+
+		return 0;
+	}
+
+	length = name_show(&edev->dev, NULL, prop_buf);
+	if (length > 0) {
+		if (prop_buf[length - 1] == '\n')
+			prop_buf[length - 1] = 0;
+		snprintf(name_buf, sizeof(name_buf), "NAME=%s", prop_buf);
+		envp[env_offset++] = name_buf;
+	}
+
+	length = state_show(&edev->dev, NULL, prop_buf);
+	if (length > 0) {
+		if (prop_buf[length - 1] == '\n')
+			prop_buf[length - 1] = 0;
+		snprintf(state_buf, sizeof(state_buf), "STATE=%s", prop_buf);
+		envp[env_offset++] = state_buf;
+	}
+	envp[env_offset] = NULL;
+
+	/* Unlock early before uevent */
+	spin_unlock_irqrestore(&edev->lock, flags);
+	kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
+	free_page((unsigned long)prop_buf);
+
+	return 0;
 }
-EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
+EXPORT_SYMBOL_GPL(extcon_sync);

 /**
- * extcon_set_cable_state_() - Set the status of a specific cable.
+ * extcon_get_state() - Get the state of a external connector.
+ * @edev:	the extcon device that has the cable.
+ * @id:		the unique id of each external connector in extcon enumeration.
+ */
+int extcon_get_state(struct extcon_dev *edev, const unsigned int id)
+{
+	int index, state;
+	unsigned long flags;
+
+	if (!edev)
+		return -EINVAL;
+
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+	state = is_extcon_attached(edev, index);
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return state;
+}
+EXPORT_SYMBOL_GPL(extcon_get_state);
+
+/**
+ * extcon_set_state() - Set the state of a external connector.
+ *			without a notification.
 * @edev:		the extcon device that has the cable.
 * @id:			the unique id of each external connector
 *			in extcon enumeration.
 * @state:		the new cable status. The default semantics is
 *			true: attached / false: detached.
+ *
+ * This function only set the state of a external connector without
+ * a notification. To synchronize the data of a external connector,
+ * use extcon_set_state_sync() and extcon_sync().
 */
-int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 				bool cable_state)
 {
-	u32 state;
-	int index;
+	unsigned long flags;
+	int index, ret = 0;

 	if (!edev)
 		return -EINVAL;
@ -382,13 +533,338 @@ int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
 	if (index < 0)
 		return index;

-	if (edev->max_supported && edev->max_supported <= index)
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/* Check whether the external connector's state is changed. */
+	if (!is_extcon_changed(edev, index, cable_state))
+		goto out;
+
+	if (check_mutually_exclusive(edev,
+		(edev->state & ~BIT(index)) | (cable_state & BIT(index)))) {
+		ret = -EPERM;
+		goto out;
+	}
+
+	/*
+	 * Initialize the value of extcon property before setting
+	 * the detached state for an external connector.
+	 */
+	if (!cable_state)
+		init_property(edev, id, index);
+
+	/* Update the state for a external connector. */
+	if (cable_state)
+		edev->state |= BIT(index);
+	else
+		edev->state &= ~(BIT(index));
+out:
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_set_state);
+
+/**
+ * extcon_set_state_sync() - Set the state of a external connector
+ *			with a notification.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @state:		the new cable status. The default semantics is
+ *			true: attached / false: detached.
+ *
+ * This function set the state of external connector and synchronize the data
+ * by usning a notification.
+ */
+int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
+{
+	int ret, index;
+	unsigned long flags;
+
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	/* Check whether the external connector's state is changed. */
+	spin_lock_irqsave(&edev->lock, flags);
+	ret = is_extcon_changed(edev, index, cable_state);
+	spin_unlock_irqrestore(&edev->lock, flags);
+	if (!ret)
+		return 0;
+
+	ret = extcon_set_state(edev, id, cable_state);
+	if (ret < 0)
+		return ret;
+
+	return extcon_sync(edev, id);
+}
+EXPORT_SYMBOL_GPL(extcon_set_state_sync);
+
+/**
+ * extcon_get_property() - Get the property value of a specific cable.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ * @prop_val:		the pointer which store the value of property.
+ *
+ * When getting the property value of external connector, the external connector
+ * should be attached. If detached state, function just return 0 without
+ * property value. Also, the each property should be included in the list of
+ * supported properties according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value *prop_val)
+{
+	struct extcon_cable *cable;
+	unsigned long flags;
+	int index, ret = 0;
+
+	*prop_val = (union extcon_property_value)(0);
+
+	if (!edev)
 		return -EINVAL;

-	state = cable_state ? (1 << index) : 0;
-	return extcon_update_state(edev, 1 << index, state);
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/* Check whether the property is available or not. */
+	if (!is_extcon_property_capability(edev, id, index, prop)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return -EPERM;
+	}
+
+	/*
+	 * Check whether the external connector is attached.
+	 * If external connector is detached, the user can not
+	 * get the property value.
+	 */
+	if (!is_extcon_attached(edev, index)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return 0;
+	}
+
+	cable = &edev->cables[index];
+
+	/* Get the property value according to extcon type */
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		*prop_val = cable->usb_propval[prop - EXTCON_PROP_USB_MIN];
+		break;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		*prop_val = cable->chg_propval[prop - EXTCON_PROP_CHG_MIN];
+		break;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		*prop_val = cable->jack_propval[prop - EXTCON_PROP_JACK_MIN];
+		break;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		*prop_val = cable->disp_propval[prop - EXTCON_PROP_DISP_MIN];
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return ret;
 }
-EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
+EXPORT_SYMBOL_GPL(extcon_get_property);
+
+/**
+ * extcon_set_property() - Set the property value of a specific cable.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ * @prop_val:		the pointer including the new value of property.
+ *
+ * The each property should be included in the list of supported properties
+ * according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val)
+{
+	struct extcon_cable *cable;
+	unsigned long flags;
+	int index, ret = 0;
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/* Check whether the property is available or not. */
+	if (!is_extcon_property_capability(edev, id, index, prop)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return -EPERM;
+	}
+
+	cable = &edev->cables[index];
+
+	/* Set the property value according to extcon type */
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		cable->usb_propval[prop - EXTCON_PROP_USB_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		cable->chg_propval[prop - EXTCON_PROP_CHG_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		cable->jack_propval[prop - EXTCON_PROP_JACK_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		cable->disp_propval[prop - EXTCON_PROP_DISP_MIN] = prop_val;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_set_property);
+
+/**
+ * extcon_set_property_sync() - Set the property value of a specific cable
+			with a notification.
+ * @prop_val:		the pointer including the new value of property.
+ *
+ * When setting the property value of external connector, the external connector
+ * should be attached. The each property should be included in the list of
+ * supported properties according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val)
+{
+	int ret;
+
+	ret = extcon_set_property(edev, id, prop, prop_val);
+	if (ret < 0)
+		return ret;
+
+	return extcon_sync(edev, id);
+}
+EXPORT_SYMBOL_GPL(extcon_set_property_sync);
+
+/**
+ * extcon_get_property_capability() - Get the capability of property
+ *			of an external connector.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ *
+ * Returns 1 if the property is available or 0 if not available.
+ */
+int extcon_get_property_capability(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop)
+{
+	int index;
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	return is_extcon_property_capability(edev, id, index, prop);
+}
+EXPORT_SYMBOL_GPL(extcon_get_property_capability);
+
+/**
+ * extcon_set_property_capability() - Set the capability of a property
+ *			of an external connector.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ *
+ * This function set the capability of a property for an external connector
+ * to mark the bit in capability bitmap which mean the available state of
+ * a property.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop)
+{
+	struct extcon_cable *cable;
+	int index, type, ret = 0;
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not. */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id. */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return type;
+
+	cable = &edev->cables[index];
+
+	switch (type) {
+	case EXTCON_TYPE_USB:
+		__set_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits);
+		break;
+	case EXTCON_TYPE_CHG:
+		__set_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits);
+		break;
+	case EXTCON_TYPE_JACK:
+		__set_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits);
+		break;
+	case EXTCON_TYPE_DISP:
+		__set_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_set_property_capability);

 /**
 * extcon_get_extcon_dev() - Get the extcon device instance from the name
@ -428,7 +904,7 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
 			     struct notifier_block *nb)
 {
 	unsigned long flags;
-	int ret, idx;
+	int ret, idx = -EINVAL;

 	if (!nb)
 		return -EINVAL;
@ -846,13 +1322,13 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
 		return ERR_PTR(-EINVAL);

 	if (!dev->of_node) {
-		dev_err(dev, "device does not have a device node entry\n");
+		dev_dbg(dev, "device does not have a device node entry\n");
 		return ERR_PTR(-EINVAL);
 	}

 	node = of_parse_phandle(dev->of_node, "extcon", index);
 	if (!node) {
-		dev_err(dev, "failed to get phandle in %s node\n",
+		dev_dbg(dev, "failed to get phandle in %s node\n",
 			dev->of_node->full_name);
 		return ERR_PTR(-ENODEV);
 	}
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@ -28,6 +28,15 @@

 #include <linux/device.h>

+/*
+ * Define the type of supported external connectors
+ */
+#define EXTCON_TYPE_USB		BIT(0)	/* USB connector */
+#define EXTCON_TYPE_CHG		BIT(1)	/* Charger connector */
+#define EXTCON_TYPE_JACK	BIT(2)	/* Jack connector */
+#define EXTCON_TYPE_DISP	BIT(3)	/* Display connector */
+#define EXTCON_TYPE_MISC	BIT(4)	/* Miscellaneous connector */
+
 /*
 * Define the unique id of supported external connectors
 */
@ -44,6 +53,7 @@
 #define EXTCON_CHG_USB_ACA	8	/* Accessory Charger Adapter */
 #define EXTCON_CHG_USB_FAST	9
 #define EXTCON_CHG_USB_SLOW	10
+#define EXTCON_CHG_WPT		11	/* Wireless Power Transfer */

 /* Jack external connector */
 #define EXTCON_JACK_MICROPHONE	20
@ -60,6 +70,8 @@
 #define EXTCON_DISP_MHL		41	/* Mobile High-Definition Link */
 #define EXTCON_DISP_DVI		42	/* Digital Visual Interface */
 #define EXTCON_DISP_VGA		43	/* Video Graphics Array */
+#define EXTCON_DISP_DP		44	/* Display Port */
+#define EXTCON_DISP_HMD		45	/* Head-Mounted Display */

 /* Miscellaneous external connector */
 #define EXTCON_DOCK		60
@ -68,6 +80,85 @@

 #define EXTCON_NUM		63

+/*
+ * Define the property of supported external connectors.
+ *
+ * When adding the new extcon property, they *must* have
+ * the type/value/default information. Also, you *have to*
+ * modify the EXTCON_PROP_[type]_START/END definitions
+ * which mean the range of the supported properties
+ * for each extcon type.
+ *
+ * The naming style of property
+ * : EXTCON_PROP_[type]_[property name]
+ *
+ * EXTCON_PROP_USB_[property name]	: USB property
+ * EXTCON_PROP_CHG_[property name]	: Charger property
+ * EXTCON_PROP_JACK_[property name]	: Jack property
+ * EXTCON_PROP_DISP_[property name]	: Display property
+ */
+
+/*
+ * Properties of EXTCON_TYPE_USB.
+ *
+ * - EXTCON_PROP_USB_VBUS
+ * @type:	integer (intval)
+ * @value:	0 (low) or 1 (high)
+ * @default:	0 (low)
+ * - EXTCON_PROP_USB_TYPEC_POLARITY
+ * @type:	integer (intval)
+ * @value:	0 (normal) or 1 (flip)
+ * @default:	0 (normal)
+ * - EXTCON_PROP_USB_SS (SuperSpeed)
+ * @type:       integer (intval)
+ * @value:      0 (USB/USB2) or 1 (USB3)
+ * @default:    0 (USB/USB2)
+ *
+ */
+#define EXTCON_PROP_USB_VBUS		0
+#define EXTCON_PROP_USB_TYPEC_POLARITY	1
+#define EXTCON_PROP_USB_SS		2
+
+#define EXTCON_PROP_USB_MIN		0
+#define EXTCON_PROP_USB_MAX		2
+#define EXTCON_PROP_USB_CNT	(EXTCON_PROP_USB_MAX - EXTCON_PROP_USB_MIN + 1)
+
+/* Properties of EXTCON_TYPE_CHG. */
+#define EXTCON_PROP_CHG_MIN		50
+#define EXTCON_PROP_CHG_MAX		50
+#define EXTCON_PROP_CHG_CNT	(EXTCON_PROP_CHG_MAX - EXTCON_PROP_CHG_MIN + 1)
+
+/* Properties of EXTCON_TYPE_JACK. */
+#define EXTCON_PROP_JACK_MIN		100
+#define EXTCON_PROP_JACK_MAX		100
+#define EXTCON_PROP_JACK_CNT (EXTCON_PROP_JACK_MAX - EXTCON_PROP_JACK_MIN + 1)
+
+/*
+ * Properties of EXTCON_TYPE_DISP.
+ *
+ * - EXTCON_PROP_DISP_HPD (Hot Plug Detect)
+ * @type:       integer (intval)
+ * @value:      0 (no hpd) or 1 (hpd)
+ * @default:    0 (no hpd)
+ *
+ */
+#define EXTCON_PROP_DISP_HPD		150
+
+/* Properties of EXTCON_TYPE_DISP. */
+#define EXTCON_PROP_DISP_MIN		150
+#define EXTCON_PROP_DISP_MAX		151
+#define EXTCON_PROP_DISP_CNT (EXTCON_PROP_DISP_MAX - EXTCON_PROP_DISP_MIN + 1)
+
+/*
+ * Define the type of property's value.
+ *
+ * Define the property's value as union type. Because each property
+ * would need the different data type to store it.
+ */
+union extcon_property_value {
+	int intval;	/* type : integer (intval) */
+};
+
 struct extcon_cable;

 /**
@ -150,26 +241,43 @@ extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);

 /*
- * get/set/update_state access the 32b encoded state value, which represents
- * states of all possible cables of the multistate port. For example, if one
- * calls extcon_set_state(edev, 0x7), it may mean that all the three cables
- * are attached to the port.
- */
-static inline u32 extcon_get_state(struct extcon_dev *edev)
-{
-	return edev->state;
-}
-
-extern int extcon_set_state(struct extcon_dev *edev, u32 state);
-extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state);
-
-/*
- * get/set_cable_state access each bit of the 32b encoded state value.
+ * get/set_state access each bit of the 32b encoded state value.
 * They are used to access the status of each cable based on the cable id.
 */
-extern int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id);
-extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+extern int extcon_get_state(struct extcon_dev *edev, unsigned int id);
+extern int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 				   bool cable_state);
+extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool cable_state);
+
+/*
+ * Synchronize the state and property data for a specific external connector.
+ */
+extern int extcon_sync(struct extcon_dev *edev, unsigned int id);
+
+/*
+ * get/set_property access the property value of each external connector.
+ * They are used to access the property of each cable based on the property id.
+ */
+extern int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value *prop_val);
+extern int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val);
+extern int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val);
+
+/*
+ * get/set_property_capability set the capability of the property for each
+ * external connector. They are used to set the capability of the property
+ * of each external connector based on the id and property.
+ */
+extern int extcon_get_property_capability(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop);
+extern int extcon_set_property_capability(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop);

 /*
 * Following APIs are to monitor every action of a notifier.
@ -232,30 +340,57 @@ static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,

 static inline void devm_extcon_dev_free(struct extcon_dev *edev) { }

-static inline u32 extcon_get_state(struct extcon_dev *edev)
+
+static inline int extcon_get_state(struct extcon_dev *edev, unsigned int id)
 {
 	return 0;
 }

-static inline int extcon_set_state(struct extcon_dev *edev, u32 state)
+static inline int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
 {
 	return 0;
 }

-static inline int extcon_update_state(struct extcon_dev *edev, u32 mask,
-				       u32 state)
+static inline int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
 {
 	return 0;
 }

-static inline int extcon_get_cable_state_(struct extcon_dev *edev,
-					  unsigned int id)
+static inline int extcon_sync(struct extcon_dev *edev, unsigned int id)
 {
 	return 0;
 }

-static inline int extcon_set_cable_state_(struct extcon_dev *edev,
-					  unsigned int id, bool cable_state)
+static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop,
+					union extcon_property_value *prop_val)
+{
+	return 0;
+}
+static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop,
+					union extcon_property_value prop_val)
+{
+	return 0;
+}
+
+static inline int extcon_set_property_sync(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop,
+					union extcon_property_value prop_val)
+{
+	return 0;
+}
+
+static inline int extcon_get_property_capability(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop)
+{
+	return 0;
+}
+
+static inline int extcon_set_property_capability(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop)
 {
 	return 0;
 }
@ -320,4 +455,15 @@ static inline int extcon_unregister_interest(struct extcon_specific_cable_nb
 {
 	return -EINVAL;
 }
+
+static inline int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id)
+{
+	return extcon_get_state(edev, id);
+}
+
+static inline int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+				   bool cable_state)
+{
+	return extcon_set_state_sync(edev, id, cable_state);
+}
 #endif /* __LINUX_EXTCON_H__ */
--- a/include/linux/extcon/extcon-adc-jack.h
+++ b/include/linux/extcon/extcon-adc-jack.h
@ -20,8 +20,8 @@

 /**
 * struct adc_jack_cond - condition to use an extcon state
- * @state:		the corresponding extcon state (if 0, this struct
 *			denotes the last adc_jack_cond element among the array)
+ * @id:			the unique id of each external connector
 * @min_adc:		min adc value for this condition
 * @max_adc:		max adc value for this condition
 *
@ -33,7 +33,7 @@
 * because when no adc_jack_cond is met, state = 0 is automatically chosen.
 */
 struct adc_jack_cond {
-	u32 state;	/* extcon state value. 0 if invalid */
+	unsigned int id;
 	u32 min_adc;
 	u32 max_adc;
 };