2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 13:13:57 +08:00

Merge branch 'next/topic-plat-samsung-1' into next-samsung-cleanup

This commit is contained in:
Kukjin Kim 2011-09-17 11:05:43 +09:00
commit 4c59de052e
5 changed files with 134 additions and 117 deletions

View File

@ -14,9 +14,53 @@
#define __ASM_ARCH_MAP_H
#include <plat/map-base.h>
#include <plat/map.h>
#define S3C2410_ADDR(x) S3C_ADDR(x)
/*
* S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
* So need to define it, and here is to avoid redefinition warning.
*/
#define S3C_UART_OFFSET (0x4000)
#include <plat/map-s3c.h>
/*
* interrupt controller is the first thing we put in, to make
* the assembly code for the irq detection easier
*/
#define S3C2410_PA_IRQ (0x4A000000)
#define S3C24XX_SZ_IRQ SZ_1M
/* memory controller registers */
#define S3C2410_PA_MEMCTRL (0x48000000)
#define S3C24XX_SZ_MEMCTRL SZ_1M
/* UARTs */
#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
/* Timers */
#define S3C2410_PA_TIMER (0x51000000)
#define S3C24XX_SZ_TIMER SZ_1M
/* Clock and Power management */
#define S3C24XX_SZ_CLKPWR SZ_1M
/* USB Device port */
#define S3C2410_PA_USBDEV (0x52000000)
#define S3C24XX_SZ_USBDEV SZ_1M
/* Watchdog */
#define S3C2410_PA_WATCHDOG (0x53000000)
#define S3C24XX_SZ_WATCHDOG SZ_1M
/* Standard size definitions for peripheral blocks. */
#define S3C24XX_SZ_UART SZ_1M
#define S3C24XX_SZ_IIS SZ_1M
#define S3C24XX_SZ_ADC SZ_1M
#define S3C24XX_SZ_SPI SZ_1M
#define S3C24XX_SZ_SDI SZ_1M
#define S3C24XX_SZ_NAND SZ_1M
#define S3C24XX_SZ_GPIO SZ_1M
/* USB host controller */
#define S3C2410_PA_USBHOST (0x49000000)
@ -75,10 +119,8 @@
/* S3C2412 memory and IO controls */
#define S3C2412_PA_SSMC (0x4F000000)
#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
#define S3C2412_PA_EBI (0x48800000)
#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
/* physical addresses of all the chip-select areas */
@ -100,12 +142,10 @@
#define S3C24XX_PA_DMA S3C2410_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2410_PA_LCD
#define S3C24XX_PA_UART S3C2410_PA_UART
#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
#define S3C24XX_PA_IIS S3C2410_PA_IIS
#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI

View File

@ -16,6 +16,7 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
#include <plat/map-s3c.h>
/*
* Post-mux Chip Select Regions Xm0CSn_
@ -83,7 +84,6 @@
#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
@ -94,16 +94,10 @@
#define S3C64XX_PA_VIC1 (0x71300000)
#define S3C64XX_PA_MODEM (0x74108000)
#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_PA_USBHOST (0x74300000)
#define S3C64XX_PA_USB_HSPHY (0x7C100000)
#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
/* place VICs close together */
#define VA_VIC0 (S3C_VA_IRQ + 0x00)
#define VA_VIC1 (S3C_VA_IRQ + 0x10000)
/* compatibiltiy defines. */
#define S3C_PA_TIMER S3C64XX_PA_TIMER
@ -119,7 +113,6 @@
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#define S3C_PA_RTC S3C64XX_PA_RTC
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG

View File

@ -1,100 +0,0 @@
/* linux/include/asm-arm/plat-s3c24xx/map.h
*
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_S3C24XX_MAP_H
#define __ASM_PLAT_S3C24XX_MAP_H
/* interrupt controller is the first thing we put in, to make
* the assembly code for the irq detection easier
*/
#define S3C24XX_VA_IRQ S3C_VA_IRQ
#define S3C2410_PA_IRQ (0x4A000000)
#define S3C24XX_SZ_IRQ SZ_1M
/* memory controller registers */
#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
#define S3C2410_PA_MEMCTRL (0x48000000)
#define S3C24XX_SZ_MEMCTRL SZ_1M
/* UARTs */
#define S3C24XX_VA_UART S3C_VA_UART
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_SZ_UART SZ_1M
#define S3C_UART_OFFSET (0x4000)
#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
/* Timers */
#define S3C24XX_VA_TIMER S3C_VA_TIMER
#define S3C2410_PA_TIMER (0x51000000)
#define S3C24XX_SZ_TIMER SZ_1M
/* Clock and Power management */
#define S3C24XX_VA_CLKPWR S3C_VA_SYS
#define S3C24XX_SZ_CLKPWR SZ_1M
/* USB Device port */
#define S3C2410_PA_USBDEV (0x52000000)
#define S3C24XX_SZ_USBDEV SZ_1M
/* Watchdog */
#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
#define S3C2410_PA_WATCHDOG (0x53000000)
#define S3C24XX_SZ_WATCHDOG SZ_1M
/* Standard size definitions for peripheral blocks. */
#define S3C24XX_SZ_IIS SZ_1M
#define S3C24XX_SZ_ADC SZ_1M
#define S3C24XX_SZ_SPI SZ_1M
#define S3C24XX_SZ_SDI SZ_1M
#define S3C24XX_SZ_NAND SZ_1M
/* GPIO ports */
/* the calculation for the VA of this must ensure that
* it is the same distance apart from the UART in the
* phsyical address space, as the initial mapping for the IO
* is done as a 1:1 mapping. This puts it (currently) at
* 0xFA800000, which is not in the way of any current mapping
* by the base system.
*/
#define S3C2410_PA_GPIO (0x56000000)
#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
#define S3C24XX_SZ_GPIO SZ_1M
/* ISA style IO, for each machine to sort out mappings for, if it
* implements it. We reserve two 16M regions for ISA.
*/
#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
/* deal with the registers that move under the 2412/2413 */
#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
#ifndef __ASSEMBLY__
extern void __iomem *s3c24xx_va_gpio2;
#endif
#ifdef CONFIG_CPU_S3C2412_ONLY
#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
#else
#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
#endif
#else
#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
#endif
#endif /* __ASM_PLAT_S3C24XX_MAP_H */

View File

@ -0,0 +1,84 @@
/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
*
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_MAP_S3C_H
#define __ASM_PLAT_MAP_S3C_H __FILE__
#define S3C24XX_VA_IRQ S3C_VA_IRQ
#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
#define S3C24XX_VA_UART S3C_VA_UART
#define S3C24XX_VA_TIMER S3C_VA_TIMER
#define S3C24XX_VA_CLKPWR S3C_VA_SYS
#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_PA_UART S3C2410_PA_UART
#ifndef S3C_UART_OFFSET
#define S3C_UART_OFFSET (0x400)
#endif
/*
* GPIO ports
*
* the calculation for the VA of this must ensure that
* it is the same distance apart from the UART in the
* phsyical address space, as the initial mapping for the IO
* is done as a 1:1 mapping. This puts it (currently) at
* 0xFA800000, which is not in the way of any current mapping
* by the base system.
*/
#define S3C2410_PA_GPIO (0x56000000)
#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
/*
* ISA style IO, for each machine to sort out mappings for,
* if it implements it. We reserve two 16M regions for ISA.
*/
#define S3C2410_ADDR(x) S3C_ADDR(x)
#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
/* deal with the registers that move under the 2412/2413 */
#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
#ifndef __ASSEMBLY__
extern void __iomem *s3c24xx_va_gpio2;
#endif
#ifdef CONFIG_CPU_S3C2412_ONLY
#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
#else
#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
#endif
#else
#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
#endif
#include <plat/map-s5p.h>
#endif /* __ASM_PLAT_MAP_S3C_H */

View File

@ -1,4 +1,4 @@
/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
@ -40,8 +40,6 @@
#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000)
#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000)
#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#define VA_VIC1 VA_VIC(1)
@ -58,4 +56,6 @@
#define S3C_UART_OFFSET (0x400)
#endif
#include <plat/map-s3c.h>
#endif /* __ASM_PLAT_MAP_S5P_H */