renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-16 01:04:08 +08:00
Code

Revert "Oprofile Multiplexing Patch"

Browse Source 
Reverting commit 1a960b402a for the main
branch. Multiplexing will be tracked on a separate feature branch.

Conflicts:

    arch/x86/oprofile/nmi_int.c
This commit is contained in:
Robert Richter 2008-09-24 11:08:52 +02:00
parent 45f197ade7
commit 4c168eaf7e
10 changed files with 45 additions and 247 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

100
arch/x86/oprofile/nmi_int.c
View File

@ -23,18 +23,12 @@
#include "op_counter.h"
#include "op_x86_model.h"
DEFINE_PER_CPU(int, switch_index);
static struct op_x86_model_spec const *model;
static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
static int nmi_start(void);
static void nmi_stop(void);
static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs);
static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs);
static void nmi_cpu_stop(void *dummy);
static void nmi_cpu_start(void *dummy);
/* 0 == registered but off, 1 == registered and on */
static int nmi_enabled = 0;
@ -87,47 +81,6 @@ static void exit_sysfs(void)
#define exit_sysfs() do { } while (0)
#endif /* CONFIG_PM */
static void nmi_cpu_switch(void *dummy)
{
int cpu = smp_processor_id();
int si = per_cpu(switch_index, cpu);
struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
nmi_cpu_stop(NULL);
nmi_cpu_save_mpx_registers(msrs);
/* move to next set */
si += model->num_hardware_counters;
if ((si > model->num_counters) || (counter_config[si].count == 0))
per_cpu(switch_index, smp_processor_id()) = 0;
else
per_cpu(switch_index, smp_processor_id()) = si;
nmi_cpu_restore_mpx_registers(msrs);
model->setup_ctrs(msrs);
nmi_cpu_start(NULL);
}
/*
* Quick check to see if multiplexing is necessary.
* The check should be sufficient since counters are used
* in ordre.
*/
static int nmi_multiplex_on(void)
{
return counter_config[model->num_hardware_counters].count ? 0 : -EINVAL;
}
static int nmi_switch_event(void)
{
if (nmi_multiplex_on() < 0)
return -EINVAL;
on_each_cpu(nmi_cpu_switch, NULL, 1);
return 0;
}
static int profile_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
@ -191,10 +144,11 @@ static void free_msrs(void)
static int allocate_msrs(void)
{
int i, success = 1;
int success = 1;
size_t controls_size = sizeof(struct op_msr) * model->num_controls;
size_t counters_size = sizeof(struct op_msr) * model->num_counters;
int i;
for_each_possible_cpu(i) {
per_cpu(cpu_msrs, i).counters = kmalloc(counters_size,
GFP_KERNEL);
@ -202,8 +156,8 @@ static int allocate_msrs(void)
success = 0;
break;
}
per_cpu(cpu_msrs, i).controls =
kmalloc(controls_size, GFP_KERNEL);
per_cpu(cpu_msrs, i).controls = kmalloc(controls_size,
GFP_KERNEL);
if (!per_cpu(cpu_msrs, i).controls) {
success = 0;
break;
@ -247,8 +201,7 @@ static int nmi_setup(void)
return err;
}
/*
* We need to serialize save and setup for HT because the subset
/* We need to serialize save and setup for HT because the subset
* of msrs are distinct for save and setup operations
*/
@ -264,6 +217,7 @@ static int nmi_setup(void)
per_cpu(cpu_msrs, 0).controls,
sizeof(struct op_msr) * model->num_controls);
}
}
on_each_cpu(nmi_save_registers, NULL, 1);
on_each_cpu(nmi_cpu_setup, NULL, 1);
@ -271,41 +225,7 @@ static int nmi_setup(void)
return 0;
}
static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
{
unsigned int si = __get_cpu_var(switch_index);
unsigned int const nr_ctrs = model->num_hardware_counters;
struct op_msr *counters = &msrs->counters[si];
unsigned int i;
for (i = 0; i < nr_ctrs; ++i) {
int offset = i + si;
if (counters[offset].addr) {
rdmsr(counters[offset].addr,
counters[offset].multiplex.low,
counters[offset].multiplex.high);
}
}
}
static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
{
unsigned int si = __get_cpu_var(switch_index);
unsigned int const nr_ctrs = model->num_hardware_counters;
struct op_msr *counters = &msrs->counters[si];
unsigned int i;
for (i = 0; i < nr_ctrs; ++i) {
int offset = i + si;
if (counters[offset].addr) {
wrmsr(counters[offset].addr,
counters[offset].multiplex.low,
counters[offset].multiplex.high);
}
}
}
static void nmi_cpu_restore_registers(struct op_msrs *msrs)
static void nmi_restore_registers(struct op_msrs *msrs)
{
unsigned int const nr_ctrs = model->num_counters;
unsigned int const nr_ctrls = model->num_controls;
@ -345,8 +265,7 @@ static void nmi_cpu_shutdown(void *dummy)
apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
apic_write(APIC_LVTERR, v);
nmi_cpu_restore_registers(msrs);
__get_cpu_var(switch_index) = 0;
nmi_restore_registers(msrs);
}
static void nmi_shutdown(void)
@ -409,7 +328,6 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
counter_config[i].save_count_low = 0;
}
return 0;
@ -551,14 +469,12 @@ int __init op_nmi_init(struct oprofile_operations *ops)
}
/* default values, can be overwritten by model */
__raw_get_cpu_var(switch_index) = 0;
ops->create_files = nmi_create_files;
ops->setup = nmi_setup;
ops->shutdown = nmi_shutdown;
ops->start = nmi_start;
ops->stop = nmi_stop;
ops->cpu_type = cpu_type;
ops->switch_events = nmi_switch_event;
if (model->init)
ret = model->init(ops);

3
arch/x86/oprofile/op_counter.h
View File

@ -10,14 +10,13 @@
#ifndef OP_COUNTER_H
#define OP_COUNTER_H
#define OP_MAX_COUNTER 32
#define OP_MAX_COUNTER 8
/* Per-perfctr configuration as set via
* oprofilefs.
*/
struct op_counter_config {
unsigned long count;
unsigned long save_count_low;
unsigned long enabled;
unsigned long event;
unsigned long kernel;

76
arch/x86/oprofile/op_model_amd.c
View File

@ -15,7 +15,6 @@
#include <linux/oprofile.h>
#include <linux/device.h>
#include <linux/pci.h>
#include <linux/percpu.h>
#include <asm/ptrace.h>
#include <asm/msr.h>
@ -24,10 +23,8 @@
#include "op_x86_model.h"
#include "op_counter.h"
#define NUM_COUNTERS 32
#define NUM_HARDWARE_COUNTERS 4
#define NUM_CONTROLS 32
#define NUM_HARDWARE_CONTROLS 4
#define NUM_COUNTERS 4
#define NUM_CONTROLS 4
#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
@ -51,7 +48,6 @@
#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
static unsigned long reset_value[NUM_COUNTERS];
DECLARE_PER_CPU(int, switch_index);
#ifdef CONFIG_OPROFILE_IBS
@ -134,17 +130,15 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
int i;
for (i = 0; i < NUM_COUNTERS; i++) {
int hw_counter = i % NUM_HARDWARE_COUNTERS;
if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + hw_counter))
msrs->counters[i].addr = MSR_K7_PERFCTR0 + hw_counter;
if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
else
msrs->counters[i].addr = 0;
}
for (i = 0; i < NUM_CONTROLS; i++) {
int hw_control = i % NUM_HARDWARE_CONTROLS;
if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + hw_control))
msrs->controls[i].addr = MSR_K7_EVNTSEL0 + hw_control;
if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i))
msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
else
msrs->controls[i].addr = 0;
}
@ -156,16 +150,8 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
unsigned int low, high;
int i;
for (i = 0; i < NUM_HARDWARE_CONTROLS; ++i) {
int offset = i + __get_cpu_var(switch_index);
if (counter_config[offset].enabled)
reset_value[offset] = counter_config[offset].count;
else
reset_value[offset] = 0;
}
/* clear all counters */
for (i = 0 ; i < NUM_HARDWARE_CONTROLS; ++i) {
for (i = 0 ; i < NUM_CONTROLS; ++i) {
if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
continue;
CTRL_READ(low, high, msrs, i);
@ -175,31 +161,34 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
}
/* avoid a false detection of ctr overflows in NMI handler */
for (i = 0; i < NUM_HARDWARE_COUNTERS; ++i) {
for (i = 0; i < NUM_COUNTERS; ++i) {
if (unlikely(!CTR_IS_RESERVED(msrs, i)))
continue;
CTR_WRITE(1, msrs, i);
}
/* enable active counters */
for (i = 0; i < NUM_HARDWARE_COUNTERS; ++i) {
int offset = i + __get_cpu_var(switch_index);
if ((counter_config[offset].enabled) && (CTR_IS_RESERVED(msrs, i))) {
CTR_WRITE(counter_config[offset].count, msrs, i);
for (i = 0; i < NUM_COUNTERS; ++i) {
if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
reset_value[i] = counter_config[i].count;
CTR_WRITE(counter_config[i].count, msrs, i);
CTRL_READ(low, high, msrs, i);
CTRL_CLEAR_LO(low);
CTRL_CLEAR_HI(high);
CTRL_SET_ENABLE(low);
CTRL_SET_USR(low, counter_config[offset].user);
CTRL_SET_KERN(low, counter_config[offset].kernel);
CTRL_SET_UM(low, counter_config[offset].unit_mask);
CTRL_SET_EVENT_LOW(low, counter_config[offset].event);
CTRL_SET_EVENT_HIGH(high, counter_config[offset].event);
CTRL_SET_USR(low, counter_config[i].user);
CTRL_SET_KERN(low, counter_config[i].kernel);
CTRL_SET_UM(low, counter_config[i].unit_mask);
CTRL_SET_EVENT_LOW(low, counter_config[i].event);
CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
CTRL_SET_HOST_ONLY(high, 0);
CTRL_SET_GUEST_ONLY(high, 0);
CTRL_WRITE(low, high, msrs, i);
} else {
reset_value[i] = 0;
}
}
}
@ -287,14 +276,13 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
unsigned int low, high;
int i;
for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) {
int offset = i + __get_cpu_var(switch_index);
if (!reset_value[offset])
for (i = 0 ; i < NUM_COUNTERS; ++i) {
if (!reset_value[i])
continue;
CTR_READ(low, high, msrs, i);
if (CTR_OVERFLOWED(low)) {
oprofile_add_sample(regs, offset);
CTR_WRITE(reset_value[offset], msrs, i);
oprofile_add_sample(regs, i);
CTR_WRITE(reset_value[i], msrs, i);
}
}
@ -310,10 +298,8 @@ static void op_amd_start(struct op_msrs const * const msrs)
{
unsigned int low, high;
int i;
for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) {
int offset = i + __get_cpu_var(switch_index);
if (reset_value[offset]) {
for (i = 0 ; i < NUM_COUNTERS ; ++i) {
if (reset_value[i]) {
CTRL_READ(low, high, msrs, i);
CTRL_SET_ACTIVE(low);
CTRL_WRITE(low, high, msrs, i);
@ -343,8 +329,8 @@ static void op_amd_stop(struct op_msrs const * const msrs)
/* Subtle: stop on all counters to avoid race with
* setting our pm callback */
for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) {
if (!reset_value[i + per_cpu(switch_index, smp_processor_id())])
for (i = 0 ; i < NUM_COUNTERS ; ++i) {
if (!reset_value[i])
continue;
CTRL_READ(low, high, msrs, i);
CTRL_SET_INACTIVE(low);
@ -370,11 +356,11 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
{
int i;
for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) {
for (i = 0 ; i < NUM_COUNTERS ; ++i) {
if (CTR_IS_RESERVED(msrs, i))
release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
}
for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) {
for (i = 0 ; i < NUM_CONTROLS ; ++i) {
if (CTRL_IS_RESERVED(msrs, i))
release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
}
@ -548,8 +534,6 @@ struct op_x86_model_spec const op_amd_spec = {
.exit = op_amd_exit,
.num_counters = NUM_COUNTERS,
.num_controls = NUM_CONTROLS,
.num_hardware_counters = NUM_HARDWARE_COUNTERS,
.num_hardware_controls = NUM_HARDWARE_CONTROLS,
.fill_in_addresses = &op_amd_fill_in_addresses,
.setup_ctrs = &op_amd_setup_ctrs,
.check_ctrs = &op_amd_check_ctrs,

4
arch/x86/oprofile/op_model_p4.c
View File

@ -700,8 +700,6 @@ static void p4_shutdown(struct op_msrs const * const msrs)
struct op_x86_model_spec const op_p4_ht2_spec = {
.num_counters = NUM_COUNTERS_HT2,
.num_controls = NUM_CONTROLS_HT2,
.num_hardware_counters = NUM_COUNTERS_HT2,
.num_hardware_controls = NUM_CONTROLS_HT2,
.fill_in_addresses = &p4_fill_in_addresses,
.setup_ctrs = &p4_setup_ctrs,
.check_ctrs = &p4_check_ctrs,
@ -714,8 +712,6 @@ struct op_x86_model_spec const op_p4_ht2_spec = {
struct op_x86_model_spec const op_p4_spec = {
.num_counters = NUM_COUNTERS_NON_HT,
.num_controls = NUM_CONTROLS_NON_HT,
.num_hardware_counters = NUM_COUNTERS_NON_HT,
.num_hardware_controls = NUM_CONTROLS_NON_HT,
.fill_in_addresses = &p4_fill_in_addresses,
.setup_ctrs = &p4_setup_ctrs,
.check_ctrs = &p4_check_ctrs,

2
arch/x86/oprofile/op_model_ppro.c
View File

@ -183,8 +183,6 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
struct op_x86_model_spec const op_ppro_spec = {
.num_counters = NUM_COUNTERS,
.num_controls = NUM_CONTROLS,
.num_hardware_counters = NUM_COUNTERS,
.num_hardware_controls = NUM_CONTROLS,
.fill_in_addresses = &ppro_fill_in_addresses,
.setup_ctrs = &ppro_setup_ctrs,
.check_ctrs = &ppro_check_ctrs,

3
arch/x86/oprofile/op_x86_model.h
View File

@ -19,7 +19,6 @@ struct op_saved_msr {
struct op_msr {
unsigned long addr;
struct op_saved_msr saved;
struct op_saved_msr multiplex;
};
struct op_msrs {
@ -35,8 +34,6 @@ struct pt_regs;
struct op_x86_model_spec {
int (*init)(struct oprofile_operations *ops);
void (*exit)(void);
unsigned int const num_hardware_counters;
unsigned int const num_hardware_controls;
unsigned int const num_counters;
unsigned int const num_controls;
void (*fill_in_addresses)(struct op_msrs * const msrs);

58
drivers/oprofile/oprof.c
View File

@ -12,8 +12,6 @@
#include <linux/init.h>
#include <linux/oprofile.h>
#include <linux/moduleparam.h>
#include <linux/workqueue.h>
#include <linux/time.h>
#include <asm/mutex.h>
#include "oprof.h"
@ -22,17 +20,12 @@
#include "buffer_sync.h"
#include "oprofile_stats.h"
static unsigned long is_setup;
static void switch_worker(struct work_struct *work);
static DECLARE_DELAYED_WORK(switch_work, switch_worker);
static DEFINE_MUTEX(start_mutex);
struct oprofile_operations oprofile_ops;
unsigned long timeout_jiffies;
unsigned long oprofile_started;
unsigned long backtrace_depth;
/* Multiplexing defaults at 1 msec*/
static unsigned long is_setup;
static DEFINE_MUTEX(start_mutex);
/* timer
0 - use performance monitoring hardware if available
@ -94,16 +87,6 @@ out:
return err;
}
static void start_switch_worker(void)
{
schedule_delayed_work(&switch_work, timeout_jiffies);
}
static void switch_worker(struct work_struct *work)
{
if (!oprofile_ops.switch_events())
start_switch_worker();
}
/* Actually start profiling (echo 1>/dev/oprofile/enable) */
int oprofile_start(void)
@ -111,6 +94,7 @@ int oprofile_start(void)
int err = -EINVAL;
mutex_lock(&start_mutex);
if (!is_setup)
goto out;
@ -124,9 +108,6 @@ int oprofile_start(void)
if ((err = oprofile_ops.start()))
goto out;
if (oprofile_ops.switch_events)
start_switch_worker();
oprofile_started = 1;
out:
mutex_unlock(&start_mutex);
@ -142,7 +123,6 @@ void oprofile_stop(void)
goto out;
oprofile_ops.stop();
oprofile_started = 0;
cancel_delayed_work_sync(&switch_work);
/* wake up the daemon to read what remains */
wake_up_buffer_waiter();
out:
@ -175,32 +155,6 @@ post_sync:
mutex_unlock(&start_mutex);
}
/* User inputs in ms, converts to jiffies */
int oprofile_set_timeout(unsigned long val_msec)
{
int err = 0;
mutex_lock(&start_mutex);
if (oprofile_started) {
err = -EBUSY;
goto out;
}
if (!oprofile_ops.switch_events) {
err = -EINVAL;
goto out;
}
timeout_jiffies = msecs_to_jiffies(val_msec);
if (timeout_jiffies == MAX_JIFFY_OFFSET)
timeout_jiffies = msecs_to_jiffies(1);
out:
mutex_unlock(&start_mutex);
return err;
}
int oprofile_set_backtrace(unsigned long val)
{
@ -225,16 +179,10 @@ out:
return err;
}
static void __init oprofile_switch_timer_init(void)
{
timeout_jiffies = msecs_to_jiffies(1);
}
static int __init oprofile_init(void)
{
int err;
oprofile_switch_timer_init();
err = oprofile_arch_init(&oprofile_ops);
if (err < 0 || timer) {

2
drivers/oprofile/oprof.h
View File

@ -27,7 +27,6 @@ extern unsigned long fs_buffer_watershed;
extern struct oprofile_operations oprofile_ops;
extern unsigned long oprofile_started;
extern unsigned long backtrace_depth;
extern unsigned long timeout_jiffies;
struct super_block;
struct dentry;
@ -36,6 +35,5 @@ void oprofile_create_files(struct super_block * sb, struct dentry * root);
void oprofile_timer_init(struct oprofile_operations * ops);
int oprofile_set_backtrace(unsigned long depth);
int oprofile_set_timeout(unsigned long time);
#endif /* OPROF_H */

37
drivers/oprofile/oprofile_files.c
View File

@ -9,7 +9,6 @@
#include <linux/fs.h>
#include <linux/oprofile.h>
#include <linux/jiffies.h>
#include "event_buffer.h"
#include "oprofile_stats.h"
@ -19,40 +18,6 @@ unsigned long fs_buffer_size = 131072;
unsigned long fs_cpu_buffer_size = 8192;
unsigned long fs_buffer_watershed = 32768; /* FIXME: tune */
static ssize_t timeout_read(struct file *file, char __user *buf,
size_t count, loff_t *offset)
{
return oprofilefs_ulong_to_user(jiffies_to_msecs(timeout_jiffies),
buf, count, offset);
}
static ssize_t timeout_write(struct file *file, char const __user *buf,
size_t count, loff_t *offset)
{
unsigned long val;
int retval;
if (*offset)
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
if (retval)
return retval;
retval = oprofile_set_timeout(val);
if (retval)
return retval;
return count;
}
static const struct file_operations timeout_fops = {
.read = timeout_read,
.write = timeout_write,
};
static ssize_t depth_read(struct file * file, char __user * buf, size_t count, loff_t * offset)
{
return oprofilefs_ulong_to_user(backtrace_depth, buf, count, offset);
@ -120,6 +85,7 @@ static ssize_t enable_write(struct file * file, char const __user * buf, size_t
if (*offset)
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
if (retval)
return retval;
@ -163,7 +129,6 @@ void oprofile_create_files(struct super_block * sb, struct dentry * root)
oprofilefs_create_file(sb, root, "cpu_type", &cpu_type_fops);
oprofilefs_create_file(sb, root, "backtrace_depth", &depth_fops);
oprofilefs_create_file(sb, root, "pointer_size", &pointer_size_fops);
oprofilefs_create_file(sb, root, "timeout_ms", &timeout_fops);
oprofile_create_stats_files(sb, root);
if (oprofile_ops.create_files)
oprofile_ops.create_files(sb, root);

3
include/linux/oprofile.h
View File

@ -67,9 +67,6 @@ struct oprofile_operations {
/* Initiate a stack backtrace. Optional. */
void (*backtrace)(struct pt_regs * const regs, unsigned int depth);
/* Multiplex between different events. Optional. */
int (*switch_events)(void);
/* CPU identification string. */
char * cpu_type;
};