mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-16 09:13:55 +08:00
Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on error ASoC: wm8958: Use correct format string in dev_err() call ASoC: wm8996: Call _POST_PMU callback for CPVDD ASoC: mxs: Fix mxs-saif timeout ASoC: Disable register synchronisation for low frequency WM8996 SYSCLK ASoC: Don't go through cache when applying WM5100 rev A updates ASoC: Mark WM5100 register map cache only when going into BIAS_OFF ASoC: tlv320aic32x4: always enable analouge block ASoC: tlv320aic32x4: always enable dividers ASoC: sgtl5000: Fix wrong register name in restore
This commit is contained in:
commit
486bc794ab
@ -987,12 +987,12 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
|
||||
/* restore regular registers */
|
||||
for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) {
|
||||
|
||||
/* this regs depends on the others */
|
||||
/* These regs should restore in particular order */
|
||||
if (reg == SGTL5000_CHIP_ANA_POWER ||
|
||||
reg == SGTL5000_CHIP_CLK_CTRL ||
|
||||
reg == SGTL5000_CHIP_LINREG_CTRL ||
|
||||
reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
|
||||
reg == SGTL5000_CHIP_CLK_CTRL)
|
||||
reg == SGTL5000_CHIP_REF_CTRL)
|
||||
continue;
|
||||
|
||||
snd_soc_write(codec, reg, cache[reg]);
|
||||
@ -1003,8 +1003,17 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
|
||||
snd_soc_write(codec, reg, cache[reg]);
|
||||
|
||||
/*
|
||||
* restore power and other regs according
|
||||
* to set_power() and set_clock()
|
||||
* restore these regs according to the power setting sequence in
|
||||
* sgtl5000_set_power_regs() and clock setting sequence in
|
||||
* sgtl5000_set_clock().
|
||||
*
|
||||
* The order of restore is:
|
||||
* 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after
|
||||
* SGTL5000_CHIP_ANA_POWER PLL bits set
|
||||
* 2. SGTL5000_CHIP_LINREG_CTRL should be set before
|
||||
* SGTL5000_CHIP_ANA_POWER LINREG_D restored
|
||||
* 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage,
|
||||
* prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored
|
||||
*/
|
||||
snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
|
||||
cache[SGTL5000_CHIP_LINREG_CTRL]);
|
||||
|
@ -60,7 +60,6 @@ struct aic32x4_rate_divs {
|
||||
|
||||
struct aic32x4_priv {
|
||||
u32 sysclk;
|
||||
s32 master;
|
||||
u8 page_no;
|
||||
void *control_data;
|
||||
u32 power_cfg;
|
||||
@ -369,7 +368,6 @@ static int aic32x4_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
||||
static int aic32x4_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
|
||||
{
|
||||
struct snd_soc_codec *codec = codec_dai->codec;
|
||||
struct aic32x4_priv *aic32x4 = snd_soc_codec_get_drvdata(codec);
|
||||
u8 iface_reg_1;
|
||||
u8 iface_reg_2;
|
||||
u8 iface_reg_3;
|
||||
@ -384,11 +382,9 @@ static int aic32x4_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
|
||||
/* set master/slave audio interface */
|
||||
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
||||
case SND_SOC_DAIFMT_CBM_CFM:
|
||||
aic32x4->master = 1;
|
||||
iface_reg_1 |= AIC32X4_BCLKMASTER | AIC32X4_WCLKMASTER;
|
||||
break;
|
||||
case SND_SOC_DAIFMT_CBS_CFS:
|
||||
aic32x4->master = 0;
|
||||
break;
|
||||
default:
|
||||
printk(KERN_ERR "aic32x4: invalid DAI master/slave interface\n");
|
||||
@ -526,11 +522,8 @@ static int aic32x4_mute(struct snd_soc_dai *dai, int mute)
|
||||
static int aic32x4_set_bias_level(struct snd_soc_codec *codec,
|
||||
enum snd_soc_bias_level level)
|
||||
{
|
||||
struct aic32x4_priv *aic32x4 = snd_soc_codec_get_drvdata(codec);
|
||||
|
||||
switch (level) {
|
||||
case SND_SOC_BIAS_ON:
|
||||
if (aic32x4->master) {
|
||||
/* Switch on PLL */
|
||||
snd_soc_update_bits(codec, AIC32X4_PLLPR,
|
||||
AIC32X4_PLLEN, AIC32X4_PLLEN);
|
||||
@ -554,12 +547,10 @@ static int aic32x4_set_bias_level(struct snd_soc_codec *codec,
|
||||
/* Switch on BCLK_N Divider */
|
||||
snd_soc_update_bits(codec, AIC32X4_BCLKN,
|
||||
AIC32X4_BCLKEN, AIC32X4_BCLKEN);
|
||||
}
|
||||
break;
|
||||
case SND_SOC_BIAS_PREPARE:
|
||||
break;
|
||||
case SND_SOC_BIAS_STANDBY:
|
||||
if (aic32x4->master) {
|
||||
/* Switch off PLL */
|
||||
snd_soc_update_bits(codec, AIC32X4_PLLPR,
|
||||
AIC32X4_PLLEN, 0);
|
||||
@ -583,7 +574,6 @@ static int aic32x4_set_bias_level(struct snd_soc_codec *codec,
|
||||
/* Switch off BCLK_N Divider */
|
||||
snd_soc_update_bits(codec, AIC32X4_BCLKN,
|
||||
AIC32X4_BCLKEN, 0);
|
||||
}
|
||||
break;
|
||||
case SND_SOC_BIAS_OFF:
|
||||
break;
|
||||
@ -651,9 +641,11 @@ static int aic32x4_probe(struct snd_soc_codec *codec)
|
||||
if (aic32x4->power_cfg & AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE) {
|
||||
snd_soc_write(codec, AIC32X4_PWRCFG, AIC32X4_AVDDWEAKDISABLE);
|
||||
}
|
||||
if (aic32x4->power_cfg & AIC32X4_PWR_AIC32X4_LDO_ENABLE) {
|
||||
snd_soc_write(codec, AIC32X4_LDOCTL, AIC32X4_LDOCTLEN);
|
||||
}
|
||||
|
||||
tmp_reg = (aic32x4->power_cfg & AIC32X4_PWR_AIC32X4_LDO_ENABLE) ?
|
||||
AIC32X4_LDOCTLEN : 0;
|
||||
snd_soc_write(codec, AIC32X4_LDOCTL, tmp_reg);
|
||||
|
||||
tmp_reg = snd_soc_read(codec, AIC32X4_CMMODE);
|
||||
if (aic32x4->power_cfg & AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36) {
|
||||
tmp_reg |= AIC32X4_LDOIN_18_36;
|
||||
|
@ -733,8 +733,9 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
|
||||
struct wm2000_priv *wm2000;
|
||||
struct wm2000_platform_data *pdata;
|
||||
const char *filename;
|
||||
const struct firmware *fw;
|
||||
int reg, ret;
|
||||
const struct firmware *fw = NULL;
|
||||
int ret;
|
||||
int reg;
|
||||
u16 id;
|
||||
|
||||
wm2000 = devm_kzalloc(&i2c->dev, sizeof(struct wm2000_priv),
|
||||
@ -751,7 +752,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
|
||||
ret = PTR_ERR(wm2000->regmap);
|
||||
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
|
||||
ret);
|
||||
goto err;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* Verify that this is a WM2000 */
|
||||
@ -763,7 +764,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
|
||||
if (id != 0x2000) {
|
||||
dev_err(&i2c->dev, "Device is not a WM2000 - ID %x\n", id);
|
||||
ret = -ENODEV;
|
||||
goto err_regmap;
|
||||
goto out_regmap_exit;
|
||||
}
|
||||
|
||||
reg = wm2000_read(i2c, WM2000_REG_REVISON);
|
||||
@ -782,7 +783,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
|
||||
ret = request_firmware(&fw, filename, &i2c->dev);
|
||||
if (ret != 0) {
|
||||
dev_err(&i2c->dev, "Failed to acquire ANC data: %d\n", ret);
|
||||
goto err_regmap;
|
||||
goto out_regmap_exit;
|
||||
}
|
||||
|
||||
/* Pre-cook the concatenation of the register address onto the image */
|
||||
@ -793,15 +794,13 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
|
||||
if (wm2000->anc_download == NULL) {
|
||||
dev_err(&i2c->dev, "Out of memory\n");
|
||||
ret = -ENOMEM;
|
||||
goto err_fw;
|
||||
goto out_regmap_exit;
|
||||
}
|
||||
|
||||
wm2000->anc_download[0] = 0x80;
|
||||
wm2000->anc_download[1] = 0x00;
|
||||
memcpy(wm2000->anc_download + 2, fw->data, fw->size);
|
||||
|
||||
release_firmware(fw);
|
||||
|
||||
wm2000->anc_eng_ena = 1;
|
||||
wm2000->anc_active = 1;
|
||||
wm2000->spk_ena = 1;
|
||||
@ -809,18 +808,14 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
|
||||
|
||||
wm2000_reset(wm2000);
|
||||
|
||||
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000,
|
||||
NULL, 0);
|
||||
if (ret != 0)
|
||||
goto err_fw;
|
||||
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0);
|
||||
if (!ret)
|
||||
goto out;
|
||||
|
||||
return 0;
|
||||
|
||||
err_fw:
|
||||
release_firmware(fw);
|
||||
err_regmap:
|
||||
out_regmap_exit:
|
||||
regmap_exit(wm2000->regmap);
|
||||
err:
|
||||
out:
|
||||
release_firmware(fw);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
@ -1377,6 +1377,7 @@ static int wm5100_set_bias_level(struct snd_soc_codec *codec,
|
||||
|
||||
switch (wm5100->rev) {
|
||||
case 0:
|
||||
regcache_cache_bypass(wm5100->regmap, true);
|
||||
snd_soc_write(codec, 0x11, 0x3);
|
||||
snd_soc_write(codec, 0x203, 0xc);
|
||||
snd_soc_write(codec, 0x206, 0);
|
||||
@ -1392,6 +1393,7 @@ static int wm5100_set_bias_level(struct snd_soc_codec *codec,
|
||||
snd_soc_write(codec,
|
||||
wm5100_reva_patches[i].reg,
|
||||
wm5100_reva_patches[i].val);
|
||||
regcache_cache_bypass(wm5100->regmap, false);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
@ -1402,6 +1404,7 @@ static int wm5100_set_bias_level(struct snd_soc_codec *codec,
|
||||
break;
|
||||
|
||||
case SND_SOC_BIAS_OFF:
|
||||
regcache_cache_only(wm5100->regmap, true);
|
||||
if (wm5100->pdata.ldo_ena)
|
||||
gpio_set_value_cansleep(wm5100->pdata.ldo_ena, 0);
|
||||
regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies),
|
||||
|
@ -55,7 +55,7 @@ static int wm8958_dsp2_fw(struct snd_soc_codec *codec, const char *name,
|
||||
return 0;
|
||||
|
||||
if (fw->size < 32) {
|
||||
dev_err(codec->dev, "%s: firmware too short (%d bytes)\n",
|
||||
dev_err(codec->dev, "%s: firmware too short (%zd bytes)\n",
|
||||
name, fw->size);
|
||||
goto err;
|
||||
}
|
||||
|
@ -1120,7 +1120,8 @@ SND_SOC_DAPM_SUPPLY_S("SYSCLK", 1, WM8996_AIF_CLOCKING_1, 0, 0, NULL, 0),
|
||||
SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8996_CLOCKING_1, 1, 0, NULL, 0),
|
||||
SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8996_CLOCKING_1, 2, 0, NULL, 0),
|
||||
SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8996_CHARGE_PUMP_1, 15, 0, cp_event,
|
||||
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
||||
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
|
||||
SND_SOC_DAPM_POST_PMD),
|
||||
SND_SOC_DAPM_SUPPLY("Bandgap", SND_SOC_NOPM, 0, 0, bg_event,
|
||||
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
||||
SND_SOC_DAPM_SUPPLY("LDO2", WM8996_POWER_MANAGEMENT_2, 1, 0, NULL, 0),
|
||||
@ -2007,6 +2008,7 @@ static int wm8996_set_sysclk(struct snd_soc_dai *dai,
|
||||
struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
|
||||
int lfclk = 0;
|
||||
int ratediv = 0;
|
||||
int sync = WM8996_REG_SYNC;
|
||||
int src;
|
||||
int old;
|
||||
|
||||
@ -2051,6 +2053,7 @@ static int wm8996_set_sysclk(struct snd_soc_dai *dai,
|
||||
case 32000:
|
||||
case 32768:
|
||||
lfclk = WM8996_LFCLK_ENA;
|
||||
sync = 0;
|
||||
break;
|
||||
default:
|
||||
dev_warn(codec->dev, "Unsupported clock rate %dHz\n",
|
||||
@ -2064,6 +2067,8 @@ static int wm8996_set_sysclk(struct snd_soc_dai *dai,
|
||||
WM8996_SYSCLK_SRC_MASK | WM8996_SYSCLK_DIV_MASK,
|
||||
src << WM8996_SYSCLK_SRC_SHIFT | ratediv);
|
||||
snd_soc_update_bits(codec, WM8996_CLOCKING_1, WM8996_LFCLK_ENA, lfclk);
|
||||
snd_soc_update_bits(codec, WM8996_CONTROL_INTERFACE_1,
|
||||
WM8996_REG_SYNC, sync);
|
||||
snd_soc_update_bits(codec, WM8996_AIF_CLOCKING_1,
|
||||
WM8996_SYSCLK_ENA, old);
|
||||
|
||||
|
@ -1567,6 +1567,10 @@ int wm8996_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
|
||||
/*
|
||||
* R257 (0x101) - Control Interface (1)
|
||||
*/
|
||||
#define WM8996_REG_SYNC 0x8000 /* REG_SYNC */
|
||||
#define WM8996_REG_SYNC_MASK 0x8000 /* REG_SYNC */
|
||||
#define WM8996_REG_SYNC_SHIFT 15 /* REG_SYNC */
|
||||
#define WM8996_REG_SYNC_WIDTH 1 /* REG_SYNC */
|
||||
#define WM8996_AUTO_INC 0x0004 /* AUTO_INC */
|
||||
#define WM8996_AUTO_INC_MASK 0x0004 /* AUTO_INC */
|
||||
#define WM8996_AUTO_INC_SHIFT 2 /* AUTO_INC */
|
||||
|
@ -124,6 +124,8 @@ static int mxs_saif_set_clk(struct mxs_saif *saif,
|
||||
*
|
||||
* If MCLK is not used, we just set saif clk to 512*fs.
|
||||
*/
|
||||
clk_prepare_enable(master_saif->clk);
|
||||
|
||||
if (master_saif->mclk_in_use) {
|
||||
if (mclk % 32 == 0) {
|
||||
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
|
||||
@ -133,6 +135,7 @@ static int mxs_saif_set_clk(struct mxs_saif *saif,
|
||||
ret = clk_set_rate(master_saif->clk, 384 * rate);
|
||||
} else {
|
||||
/* SAIF MCLK should be either 32x or 48x */
|
||||
clk_disable_unprepare(master_saif->clk);
|
||||
return -EINVAL;
|
||||
}
|
||||
} else {
|
||||
@ -140,6 +143,8 @@ static int mxs_saif_set_clk(struct mxs_saif *saif,
|
||||
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
|
||||
}
|
||||
|
||||
clk_disable_unprepare(master_saif->clk);
|
||||
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user