renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2025-01-19 11:04:00 +08:00
Code

phy-for-5.12

Browse Source 
- Updates:
    - Conversion to YAML binding for:
         - mtk-xsphy
         - mtk-tphy
         - mtk-ufs
 	- HDMI PHY
 	- MIPI DSI PHY
 	- brcmstb-usb-phy
    - Support for BCM4908 usb phy
    - Support for Qualcomm SDX55 USB and QMP phy
    - Support for Qualcomm SM8350 aka Snapdragon 888 UFS and USB phy
    - Support for Qualcomm SDM660 USB and UFS phy
    - Support for Qualcomm SC8180X USB and UFS phy
    - Support for Qualcomm IPQ6018 USB phy
    - Stm32 phy updates
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmAgJvkACgkQfBQHDyUj
 g0duvw//cfAxoPkAkLkyew8pHav9+JN6SypZgmWrx2i6W8xnJD+S4kpyMxRC7odI
 XidoTyjRi7Rt0bhLTDhNpdah183TkIOAVOMveu2EIofqO1SF1m6/s0fICJNsIcQm
 S1mEa/yDcnrXjcAM16BReKRl+oWG+m33TFITnRxurdfMRzjWh6a6ZFWitw5JLX7h
 ioPk74YCmlT/e2Imw1gStNyW8p9QpWvMdNnPAYSlXRRYWOpEDNFxvTfQ6s0Ys19H
 yUc4u8hCwvt7rc4Gx1oPZ5MZ4iPLhroOXBkjnT72e+yQA7fZFh02H6Ycr7FqC7mt
 xcauyNWSpCZkOO55vqVEpkKSzYTSfdzlbFCdPJjBWUQeLc125SSyl/gLEpeAMH7V
 niq8kB0D677voOnLCzCxM/OxVXWYmEgcccFiQInfD+illKZYRK1if8trZbjYswtu
 u9BQH24cRWMlAoADq0F1E9pHkmXEiW6tRlB5mk5d2+zx8fVGVntwC1ICTQ18OEkp
 eiHnRZJ6Uml2CCm1Z+vDreyBTtVuCSwnsPtJ9h9iXr7H7LHmVr7LgEvoNJ2sm+pK
 EiUcoygBvDdfseN7vZTI6Km5HmDpLiTfmPaK/FYVqoCvvdhjpP/rQnITo0qRLaxA
 hQVimvH2GQLeL6NGIH5TzvooGGbfAzoibP7psnPhPLTEAtmcUyk=
 =kOAq
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

Vinod writes:

phy-for-5.12

 - Updates:
   - Conversion to YAML binding for:
        - mtk-xsphy
        - mtk-tphy
        - mtk-ufs
	- HDMI PHY
	- MIPI DSI PHY
	- brcmstb-usb-phy
   - Support for BCM4908 usb phy
   - Support for Qualcomm SDX55 USB and QMP phy
   - Support for Qualcomm SM8350 aka Snapdragon 888 UFS and USB phy
   - Support for Qualcomm SDM660 USB and UFS phy
   - Support for Qualcomm SC8180X USB and UFS phy
   - Support for Qualcomm IPQ6018 USB phy
   - Stm32 phy updates

* tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits)
  phy: cpcap-usb: Simplify bool conversion
  phy: qcom-qmp: make a const array static, makes object smaller
  phy: zynqmp: Simplify code by using dev_err_probe()
  phy: qcom-qmp: Add support for SM8350 UFS phy
  phy: qcom-qmp: Add UFS V5 registers found in SM8350
  dt-bindings: phy: qcom,qmp: Add SM8350 UFS PHY bindings
  phy: qualcomm: usb28nm: Add MDM9607 init sequence
  dt-bindings: phy: qcom,qusb2: document ipq6018 compatible
  phy: qcom-qusb2: add QUSB2 support for IPQ6018
  phy: qcom-qmp: Add SC8180X USB phy
  phy: qcom-qmp: Add SC8180X UFS phy
  dt-bindings: phy: qcom,qmp: Add SC8180X USB phy
  dt-bindings: phy: qcom,qmp: Add SC8180X UFS to the QMP binding
  dt-bindings: phy: qcom-qusb2: Document SDM660 compatible
  phy: qcom-qusb2: Add configuration for SDM660
  phy: qcom-qusb2: Allow specifying default clock scheme
  dt-bindings: phy: qcom,usb-snps-femto-v2: Add SM8250 and SM8350 bindings
  phy: qcom-qmp: Add SM8350 USB QMP PHYs
  dt-bindings: phy: qcom,qmp: Add SM8150, SM8250 and SM8350 USB PHY bindings
  phy: qcom-qmp: Add support for SDX55 QMP PHY
  ...
This commit is contained in:
Greg Kroah-Hartman 2021-02-09 09:32:35 +01:00
commit 47ddb856c2
30 changed files with 1835 additions and 564 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
View File

@ -22,23 +22,7 @@ Required properties:
MIPI TX Configuration Module
============================
The MIPI TX configuration module controls the MIPI D-PHY.
Required properties:
- compatible: "mediatek,<chip>-mipi-tx"
- the supported chips are mt2701, 7623, mt8173 and mt8183.
- reg: Physical base address and length of the controller's registers
- clocks: PLL reference clock
- clock-output-names: name of the output clock line to the DSI encoder
- #clock-cells: must be <0>;
- #phy-cells: must be <0>.
Optional properties:
- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
the step is 200.
- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
unspecified default values shall be used.
- nvmem-cell-names: Should be "calibration-data"
See phy/mediatek,dsi-phy.yaml
Example:

18
Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
View File

@ -53,23 +53,7 @@ Required properties:
HDMI PHY
========
The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel
output and drives the HDMI pads.
Required properties:
- compatible: "mediatek,<chip>-hdmi-phy"
- the supported chips are mt2701, mt7623 and mt8173
- reg: Physical base address and length of the module's registers
- clocks: PLL reference clock
- clock-names: must contain "pll_ref"
- clock-output-names: must be "hdmitx_dig_cts" on mt8173
- #phy-cells: must be <0>
- #clock-cells: must be <0>
Optional properties:
- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa
- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c
See phy/mediatek,hdmi-phy.yaml
Example:

86
Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
View File

@ -1,86 +0,0 @@
Broadcom STB USB PHY
Required properties:
- compatible: should be one of
"brcm,brcmstb-usb-phy"
"brcm,bcm7216-usb-phy"
"brcm,bcm7211-usb-phy"
- reg and reg-names properties requirements are specific to the
compatible string.
"brcm,brcmstb-usb-phy":
- reg: 1 or 2 offset and length pairs. One for the base CTRL registers
and an optional pair for systems with USB 3.x support
- reg-names: not specified
"brcm,bcm7216-usb-phy":
- reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
registers
- reg-names: "ctrl", "xhci_ec", "xhci_gbl"
"brcm,bcm7211-usb-phy":
- reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
USB_PHY and USB_MDIO registers and an optional pair
for the BDC registers
- reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
- #phy-cells: Shall be 1 as it expects one argument for setting
the type of the PHY. Possible values are:
- PHY_TYPE_USB2 for USB1.1/2.0 PHY
- PHY_TYPE_USB3 for USB3.x PHY
Optional Properties:
- clocks : clock phandles.
- clock-names: String, clock name.
- interrupts: wakeup interrupt
- interrupt-names: "wakeup"
- brcm,ipp: Boolean, Invert Port Power.
Possible values are: 0 (Don't invert), 1 (Invert)
- brcm,ioc: Boolean, Invert Over Current detection.
Possible values are: 0 (Don't invert), 1 (Invert)
- dr_mode: String, PHY Device mode.
Possible values are: "host", "peripheral ", "drd" or "typec-pd"
If this property is not defined, the phy will default to "host" mode.
- brcm,syscon-piarbctl: phandle to syscon for handling config registers
NOTE: one or both of the following two properties must be set
- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
Example:
usbphy_0: usb-phy@f0470200 {
reg = <0xf0470200 0xb8>,
<0xf0471940 0x6c0>;
compatible = "brcm,brcmstb-usb-phy";
#phy-cells = <1>;
dr_mode = "host"
brcm,ioc = <1>;
brcm,ipp = <1>;
brcm,has-xhci;
brcm,has-eohci;
clocks = <&usb20>, <&usb30>;
clock-names = "sw_usb", "sw_usb3";
};
usb-phy@29f0200 {
reg = <0x29f0200 0x200>,
<0x29c0880 0x30>,
<0x29cc100 0x534>,
<0x2808000 0x24>,
<0x2980080 0x8>;
reg-names = "ctrl",
"xhci_ec",
"xhci_gbl",
"usb_phy",
"usb_mdio";
brcm,ioc = <0x0>;
brcm,ipp = <0x0>;
compatible = "brcm,bcm7211-usb-phy";
interrupts = <0x30>;
interrupt-parent = <&vpu_intr1_nosec_intc>;
interrupt-names = "wake";
#phy-cells = <0x1>;
brcm,has-xhci;
syscon-piarbctl = <&syscon_piarbctl>;
clocks = <&scmi_clk 256>;
clock-names = "sw_usb";
};

196
Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml Normal file
View File

@ -0,0 +1,196 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom STB USB PHY
description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI
maintainers:
- Al Cooper <alcooperx@gmail.com>
- Rafał Miłecki <rafal@milecki.pl>
properties:
compatible:
enum:
- brcm,bcm4908-usb-phy
- brcm,bcm7211-usb-phy
- brcm,bcm7216-usb-phy
- brcm,brcmstb-usb-phy
reg:
minItems: 1
maxItems: 6
items:
- description: the base CTRL register
- description: XHCI EC register
- description: XHCI GBL register
- description: USB PHY register
- description: USB MDIO register
- description: BDC register
reg-names:
minItems: 1
maxItems: 6
items:
- const: ctrl
- const: xhci_ec
- const: xhci_gbl
- const: usb_phy
- const: usb_mdio
- const: bdc_ec
clocks:
minItems: 1
maxItems: 2
clock-names:
minItems: 1
maxItems: 2
items:
- const: sw_usb
- const: sw_usb3
interrupts:
description: wakeup interrupt
interrupt-names:
const: wake
brcm,ipp:
$ref: /schemas/types.yaml#/definitions/uint32
description: Invert Port Power
minimum: 0
maximum: 1
brcm,ioc:
$ref: /schemas/types.yaml#/definitions/uint32
description: Invert Over Current detection
minimum: 0
maximum: 1
dr_mode:
description: PHY Device mode. If this property is not defined, the PHY will
default to "host" mode.
enum:
- host
- peripheral
- drd
- typec-pd
brcm,syscon-piarbctl:
description: phandle to syscon for handling config registers
$ref: /schemas/types.yaml#/definitions/phandle
brcm,has-xhci:
description: Indicates the PHY has an XHCI PHY.
type: boolean
brcm,has-eohci:
description: Indicates the PHY has an EHCI/OHCI PHY.
type: boolean
"#phy-cells":
description: |
Cell allows setting the type of the PHY. Possible values are:
- PHY_TYPE_USB2 for USB1.1/2.0 PHY
- PHY_TYPE_USB3 for USB3.x PHY
const: 1
required:
- reg
- "#phy-cells"
anyOf:
- required:
- brcm,has-xhci
- required:
- brcm,has-eohci
allOf:
- if:
properties:
compatible:
contains:
enum:
- const: brcm,bcm4908-usb-phy
- const: brcm,brcmstb-usb-phy
then:
properties:
reg:
minItems: 1
maxItems: 2
- if:
properties:
compatible:
contains:
const: brcm,bcm7211-usb-phy
then:
properties:
reg:
minItems: 5
maxItems: 6
reg-names:
minItems: 5
maxItems: 6
- if:
properties:
compatible:
contains:
const: brcm,bcm7216-usb-phy
then:
properties:
reg:
minItems: 3
maxItems: 3
reg-names:
minItems: 3
maxItems: 3
additionalProperties: false
examples:
- |
#include <dt-bindings/phy/phy.h>
usb-phy@f0470200 {
compatible = "brcm,brcmstb-usb-phy";
reg = <0xf0470200 0xb8>,
<0xf0471940 0x6c0>;
#phy-cells = <1>;
dr_mode = "host";
brcm,ioc = <1>;
brcm,ipp = <1>;
brcm,has-xhci;
brcm,has-eohci;
clocks = <&usb20>, <&usb30>;
clock-names = "sw_usb", "sw_usb3";
};
- |
#include <dt-bindings/phy/phy.h>
usb-phy@29f0200 {
compatible = "brcm,bcm7211-usb-phy";
reg = <0x29f0200 0x200>,
<0x29c0880 0x30>,
<0x29cc100 0x534>,
<0x2808000 0x24>,
<0x2980080 0x8>;
reg-names = "ctrl",
"xhci_ec",
"xhci_gbl",
"usb_phy",
"usb_mdio";
brcm,ioc = <0x0>;
brcm,ipp = <0x0>;
interrupts = <0x30>;
interrupt-parent = <&vpu_intr1_nosec_intc>;
interrupt-names = "wake";
#phy-cells = <0x1>;
brcm,has-xhci;
brcm,syscon-piarbctl = <&syscon_piarbctl>;
clocks = <&scmi_clk 256>;
clock-names = "sw_usb";
};

85
Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml Normal file
View File

@ -0,0 +1,85 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek MIPI Display Serial Interface (DSI) PHY binding
maintainers:
- Chun-Kuang Hu <chunkuang.hu@kernel.org>
- Philipp Zabel <p.zabel@pengutronix.de>
- Chunfeng Yun <chunfeng.yun@mediatek.com>
description: The MIPI DSI PHY supports up to 4-lane output.
properties:
$nodename:
pattern: "^dsi-phy@[0-9a-f]+$"
compatible:
enum:
- mediatek,mt2701-mipi-tx
- mediatek,mt7623-mipi-tx
- mediatek,mt8173-mipi-tx
- mediatek,mt8183-mipi-tx
reg:
maxItems: 1
clocks:
items:
- description: PLL reference clock
clock-output-names:
maxItems: 1
"#phy-cells":
const: 0
"#clock-cells":
const: 0
nvmem-cells:
maxItems: 1
description: A phandle to the calibration data provided by a nvmem device,
if unspecified, default values shall be used.
nvmem-cell-names:
items:
- const: calibration-data
drive-strength-microamp:
description: adjust driving current
multipleOf: 200
minimum: 2000
maximum: 6000
default: 4600
required:
- compatible
- reg
- clocks
- clock-output-names
- "#phy-cells"
- "#clock-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/mt8173-clk.h>
dsi-phy@10215000 {
compatible = "mediatek,mt8173-mipi-tx";
reg = <0x10215000 0x1000>;
clocks = <&clk26m>;
clock-output-names = "mipi_tx0_pll";
drive-strength-microamp = <4000>;
nvmem-cells= <&mipi_tx_calibration>;
nvmem-cell-names = "calibration-data";
#clock-cells = <0>;
#phy-cells = <0>;
};
...

92
Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml Normal file
View File

@ -0,0 +1,92 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/mediatek,hdmi-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek High Definition Multimedia Interface (HDMI) PHY binding
maintainers:
- Chun-Kuang Hu <chunkuang.hu@kernel.org>
- Philipp Zabel <p.zabel@pengutronix.de>
- Chunfeng Yun <chunfeng.yun@mediatek.com>
description: |
The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel
output and drives the HDMI pads.
properties:
$nodename:
pattern: "^hdmi-phy@[0-9a-f]+$"
compatible:
enum:
- mediatek,mt2701-hdmi-phy
- mediatek,mt7623-hdmi-phy
- mediatek,mt8173-hdmi-phy
reg:
maxItems: 1
clocks:
items:
- description: PLL reference clock
clock-names:
items:
- const: pll_ref
clock-output-names:
items:
- const: hdmitx_dig_cts
"#phy-cells":
const: 0
"#clock-cells":
const: 0
mediatek,ibias:
description:
TX DRV bias current for < 1.65Gbps
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 63
default: 0xa
mediatek,ibias_up:
description:
TX DRV bias current for >= 1.65Gbps
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 63
default: 0x1c
required:
- compatible
- reg
- clocks
- clock-names
- clock-output-names
- "#phy-cells"
- "#clock-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/mt8173-clk.h>
hdmi_phy: hdmi-phy@10209100 {
compatible = "mediatek,mt8173-hdmi-phy";
reg = <0x10209100 0x24>;
clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
clock-names = "pll_ref";
clock-output-names = "hdmitx_dig_cts";
mediatek,ibias = <0xa>;
mediatek,ibias_up = <0x1c>;
#clock-cells = <0>;
#phy-cells = <0>;
};
...

260
Documentation/devicetree/bindings/phy/mediatek,tphy.yaml Normal file
View File

@ -0,0 +1,260 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek T-PHY Controller Device Tree Bindings
maintainers:
- Chunfeng Yun <chunfeng.yun@mediatek.com>
description: |
The T-PHY controller supports physical layer functionality for a number of
controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
Layout differences of banks between T-PHY V1 (mt8173/mt2701) and
T-PHY V2 (mt2712) when works on USB mode:
-----------------------------------
Version 1:
port offset bank
shared 0x0000 SPLLC
0x0100 FMREG
u2 port0 0x0800 U2PHY_COM
u3 port0 0x0900 U3PHYD
0x0a00 U3PHYD_BANK2
0x0b00 U3PHYA
0x0c00 U3PHYA_DA
u2 port1 0x1000 U2PHY_COM
u3 port1 0x1100 U3PHYD
0x1200 U3PHYD_BANK2
0x1300 U3PHYA
0x1400 U3PHYA_DA
u2 port2 0x1800 U2PHY_COM
...
Version 2:
port offset bank
u2 port0 0x0000 MISC
0x0100 FMREG
0x0300 U2PHY_COM
u3 port0 0x0700 SPLLC
0x0800 CHIP
0x0900 U3PHYD
0x0a00 U3PHYD_BANK2
0x0b00 U3PHYA
0x0c00 U3PHYA_DA
u2 port1 0x1000 MISC
0x1100 FMREG
0x1300 U2PHY_COM
u3 port1 0x1700 SPLLC
0x1800 CHIP
0x1900 U3PHYD
0x1a00 U3PHYD_BANK2
0x1b00 U3PHYA
0x1c00 U3PHYA_DA
u2 port2 0x2000 MISC
...
SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back
into each port; a new bank MISC for u2 ports and CHIP for u3 ports are
added on V2.
properties:
$nodename:
pattern: "^t-phy@[0-9a-f]+$"
compatible:
oneOf:
- items:
- enum:
- mediatek,mt2701-tphy
- mediatek,mt7623-tphy
- mediatek,mt7622-tphy
- mediatek,mt8516-tphy
- const: mediatek,generic-tphy-v1
- items:
- enum:
- mediatek,mt2712-tphy
- mediatek,mt7629-tphy
- mediatek,mt8183-tphy
- const: mediatek,generic-tphy-v2
- const: mediatek,mt2701-u3phy
deprecated: true
- const: mediatek,mt2712-u3phy
deprecated: true
- const: mediatek,mt8173-u3phy
reg:
description:
Register shared by multiple ports, exclude port's private register.
It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
T-PHY V2, such as mt2712.
maxItems: 1
"#address-cells":
enum: [1, 2]
"#size-cells":
enum: [1, 2]
# Used with non-empty value if optional 'reg' is not provided.
# The format of the value is an arbitrary number of triplets of
# (child-bus-address, parent-bus-address, length).
ranges: true
mediatek,src-ref-clk-mhz:
description:
Frequency of reference clock for slew rate calibrate
default: 26
mediatek,src-coef:
description:
Coefficient for slew rate calibrate, depends on SoC process
$ref: /schemas/types.yaml#/definitions/uint32
default: 28
# Required child node:
patternProperties:
"^usb-phy@[0-9a-f]+$":
type: object
description:
A sub-node is required for each port the controller provides.
Address range information including the usual 'reg' property
is used inside these nodes to describe the controller's topology.
properties:
reg:
maxItems: 1
clocks:
minItems: 1
maxItems: 2
items:
- description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
- description: Reference clock of analog phy
description:
Uses both clocks if the clock of analog and digital phys are
separated, otherwise uses "ref" clock only if needed.
clock-names:
minItems: 1
maxItems: 2
items:
- const: ref
- const: da_ref
"#phy-cells":
const: 1
description: |
The cells contain the following arguments.
- description: The PHY type
enum:
- PHY_TYPE_USB2
- PHY_TYPE_USB3
- PHY_TYPE_PCIE
- PHY_TYPE_SATA
# The following optional vendor properties are only for debug or HQA test
mediatek,eye-src:
description:
The value of slew rate calibrate (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 7
mediatek,eye-vrt:
description:
The selection of VRT reference voltage (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 7
mediatek,eye-term:
description:
The selection of HS_TX TERM reference voltage (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 7
mediatek,intr:
description:
The selection of internal resistor (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 31
mediatek,discth:
description:
The selection of disconnect threshold (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 15
mediatek,bc12:
description:
Specify the flag to enable BC1.2 if support it
type: boolean
required:
- reg
- "#phy-cells"
additionalProperties: false
required:
- compatible
- "#address-cells"
- "#size-cells"
- ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
usb@11271000 {
compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
reg-names = "mac", "ippc";
phys = <&u2port0 PHY_TYPE_USB2>,
<&u3port0 PHY_TYPE_USB3>,
<&u2port1 PHY_TYPE_USB2>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
clocks = <&topckgen CLK_TOP_USB30_SEL>;
clock-names = "sys_ck";
};
t-phy@11290000 {
compatible = "mediatek,mt8173-u3phy";
reg = <0x11290000 0x800>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
u2port0: usb-phy@11290800 {
reg = <0x11290800 0x100>;
clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>;
clock-names = "ref", "da_ref";
#phy-cells = <1>;
};
u3port0: usb-phy@11290900 {
reg = <0x11290900 0x700>;
clocks = <&clk26m>;
clock-names = "ref";
#phy-cells = <1>;
};
u2port1: usb-phy@11291000 {
reg = <0x11291000 0x100>;
#phy-cells = <1>;
};
};
...

64
Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml Normal file
View File

@ -0,0 +1,64 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/mediatek,ufs-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Universal Flash Storage (UFS) M-PHY binding
maintainers:
- Stanley Chu <stanley.chu@mediatek.com>
- Chunfeng Yun <chunfeng.yun@mediatek.com>
description: |
UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
Each UFS M-PHY node should have its own node.
To bind UFS M-PHY with UFS host controller, the controller node should
contain a phandle reference to UFS M-PHY node.
properties:
$nodename:
pattern: "^ufs-phy@[0-9a-f]+$"
compatible:
const: mediatek,mt8183-ufsphy
reg:
maxItems: 1
clocks:
items:
- description: Unipro core control clock.
- description: M-PHY core control clock.
clock-names:
items:
- const: unipro
- const: mp
"#phy-cells":
const: 0
required:
- compatible
- reg
- "#phy-cells"
- clocks
- clock-names
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/mt8183-clk.h>
ufsphy: ufs-phy@11fa0000 {
compatible = "mediatek,mt8183-ufsphy";
reg = <0x11fa0000 0xc000>;
clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
<&infracfg CLK_INFRA_UFS_MP_SAP_BCLK>;
clock-names = "unipro", "mp";
#phy-cells = <0>;
};
...

199
Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml Normal file
View File

@ -0,0 +1,199 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek XS-PHY Controller Device Tree Bindings
maintainers:
- Chunfeng Yun <chunfeng.yun@mediatek.com>
description: |
The XS-PHY controller supports physical layer functionality for USB3.1
GEN2 controller on MediaTek SoCs.
Banks layout of xsphy
----------------------------------
port offset bank
u2 port0 0x0000 MISC
0x0100 FMREG
0x0300 U2PHY_COM
u2 port1 0x1000 MISC
0x1100 FMREG
0x1300 U2PHY_COM
u2 port2 0x2000 MISC
...
u31 common 0x3000 DIG_GLB
0x3100 PHYA_GLB
u31 port0 0x3400 DIG_LN_TOP
0x3500 DIG_LN_TX0
0x3600 DIG_LN_RX0
0x3700 DIG_LN_DAIF
0x3800 PHYA_LN
u31 port1 0x3a00 DIG_LN_TOP
0x3b00 DIG_LN_TX0
0x3c00 DIG_LN_RX0
0x3d00 DIG_LN_DAIF
0x3e00 PHYA_LN
...
DIG_GLB & PHYA_GLB are shared by U31 ports.
properties:
$nodename:
pattern: "^xs-phy@[0-9a-f]+$"
compatible:
items:
- enum:
- mediatek,mt3611-xsphy
- mediatek,mt3612-xsphy
- const: mediatek,xsphy
reg:
description:
Register shared by multiple U3 ports, exclude port's private register,
if only U2 ports provided, shouldn't use the property.
maxItems: 1
"#address-cells":
enum: [1, 2]
"#size-cells":
enum: [1, 2]
ranges: true
mediatek,src-ref-clk-mhz:
description:
Frequency of reference clock for slew rate calibrate
default: 26
mediatek,src-coef:
description:
Coefficient for slew rate calibrate, depends on SoC process
$ref: /schemas/types.yaml#/definitions/uint32
default: 17
# Required child node:
patternProperties:
"^usb-phy@[0-9a-f]+$":
type: object
description:
A sub-node is required for each port the controller provides.
Address range information including the usual 'reg' property
is used inside these nodes to describe the controller's topology.
properties:
reg:
maxItems: 1
clocks:
items:
- description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
clock-names:
items:
- const: ref
"#phy-cells":
const: 1
description: |
The cells contain the following arguments.
- description: The PHY type
enum:
- PHY_TYPE_USB2
- PHY_TYPE_USB3
# The following optional vendor properties are only for debug or HQA test
mediatek,eye-src:
description:
The value of slew rate calibrate (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 7
mediatek,eye-vrt:
description:
The selection of VRT reference voltage (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 7
mediatek,eye-term:
description:
The selection of HS_TX TERM reference voltage (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 7
mediatek,efuse-intr:
description:
The selection of Internal Resistor (U2/U3 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 63
mediatek,efuse-tx-imp:
description:
The selection of TX Impedance (U3 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 31
mediatek,efuse-rx-imp:
description:
The selection of RX Impedance (U3 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 31
required:
- reg
- clocks
- clock-names
- "#phy-cells"
additionalProperties: false
required:
- compatible
- "#address-cells"
- "#size-cells"
- ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/phy/phy.h>
u3phy: xs-phy@11c40000 {
compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
reg = <0x11c43000 0x0200>;
mediatek,src-ref-clk-mhz = <26>;
mediatek,src-coef = <17>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
u2port0: usb-phy@11c40000 {
reg = <0x11c40000 0x0400>;
clocks = <&clk48m>;
clock-names = "ref";
mediatek,eye-src = <4>;
#phy-cells = <1>;
};
u3port0: usb-phy@11c43000 {
reg = <0x11c43400 0x0500>;
clocks = <&clk26m>;
clock-names = "ref";
mediatek,efuse-intr = <28>;
#phy-cells = <1>;
};
};
...

162
Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
View File

@ -1,162 +0,0 @@
MediaTek T-PHY binding
--------------------------
T-phy controller supports physical layer functionality for a number of
controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
Required properties (controller (parent) node):
- compatible : should be one of
"mediatek,generic-tphy-v1"
"mediatek,generic-tphy-v2"
"mediatek,mt2701-u3phy" (deprecated)
"mediatek,mt2712-u3phy" (deprecated)
"mediatek,mt8173-u3phy";
make use of "mediatek,generic-tphy-v1" on mt2701 instead and
"mediatek,generic-tphy-v2" on mt2712 instead.
- #address-cells: the number of cells used to represent physical
base addresses.
- #size-cells: the number of cells used to represent the size of an address.
- ranges: the address mapping relationship to the parent, defined with
- empty value: if optional 'reg' is used.
- non-empty value: if optional 'reg' is not used. should set
the child's base address to 0, the physical address
within parent's address space, and the length of
the address map.
Required nodes : a sub-node is required for each port the controller
provides. Address range information including the usual
'reg' property is used inside these nodes to describe
the controller's topology.
Optional properties (controller (parent) node):
- reg : offset and length of register shared by multiple ports,
exclude port's private register. It is needed on mt2701
and mt8173, but not on mt2712.
- mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate
calibrate
- mediatek,src-coef : coefficient for slew rate calibrate, depends on
SoC process
Required properties (port (child) node):
- reg : address and length of the register set for the port.
- #phy-cells : should be 1 (See second example)
cell after port phandle is phy type from:
- PHY_TYPE_USB2
- PHY_TYPE_USB3
- PHY_TYPE_PCIE
- PHY_TYPE_SATA
Optional properties (PHY_TYPE_USB2 port (child) node):
- clocks : a list of phandle + clock-specifier pairs, one for each
entry in clock-names
- clock-names : may contain
"ref": 48M reference clock for HighSpeed (digital) phy; and 26M
reference clock for SuperSpeed (digital) phy, sometimes is
24M, 25M or 27M, depended on platform.
"da_ref": the reference clock of analog phy, used if the clocks
of analog and digital phys are separated, otherwise uses
"ref" clock only if needed.
- mediatek,eye-src : u32, the value of slew rate calibrate
- mediatek,eye-vrt : u32, the selection of VRT reference voltage
- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage
- mediatek,bc12 : bool, enable BC12 of u2phy if support it
- mediatek,discth : u32, the selection of disconnect threshold
- mediatek,intr : u32, the selection of internal R (resistance)
Example:
u3phy: usb-phy@11290000 {
compatible = "mediatek,mt8173-u3phy";
reg = <0 0x11290000 0 0x800>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
u2port0: usb-phy@11290800 {
reg = <0 0x11290800 0 0x100>;
clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
clock-names = "ref";
#phy-cells = <1>;
};
u3port0: usb-phy@11290900 {
reg = <0 0x11290800 0 0x700>;
clocks = <&clk26m>;
clock-names = "ref";
#phy-cells = <1>;
};
u2port1: usb-phy@11291000 {
reg = <0 0x11291000 0 0x100>;
clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
clock-names = "ref";
#phy-cells = <1>;
};
};
Specifying phy control of devices
---------------------------------
Device nodes should specify the configuration required in their "phys"
property, containing a phandle to the phy port node and a device type;
phy-names for each port are optional.
Example:
#include <dt-bindings/phy/phy.h>
usb30: usb@11270000 {
...
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
phy-names = "usb2-0", "usb3-0";
...
};
Layout differences of banks between mt8173/mt2701 and mt2712
-------------------------------------------------------------
mt8173 and mt2701:
port offset bank
shared 0x0000 SPLLC
0x0100 FMREG
u2 port0 0x0800 U2PHY_COM
u3 port0 0x0900 U3PHYD
0x0a00 U3PHYD_BANK2
0x0b00 U3PHYA
0x0c00 U3PHYA_DA
u2 port1 0x1000 U2PHY_COM
u3 port1 0x1100 U3PHYD
0x1200 U3PHYD_BANK2
0x1300 U3PHYA
0x1400 U3PHYA_DA
u2 port2 0x1800 U2PHY_COM
...
mt2712:
port offset bank
u2 port0 0x0000 MISC
0x0100 FMREG
0x0300 U2PHY_COM
u3 port0 0x0700 SPLLC
0x0800 CHIP
0x0900 U3PHYD
0x0a00 U3PHYD_BANK2
0x0b00 U3PHYA
0x0c00 U3PHYA_DA
u2 port1 0x1000 MISC
0x1100 FMREG
0x1300 U2PHY_COM
u3 port1 0x1700 SPLLC
0x1800 CHIP
0x1900 U3PHYD
0x1a00 U3PHYD_BANK2
0x1b00 U3PHYA
0x1c00 U3PHYA_DA
u2 port2 0x2000 MISC
...
SPLLC shared by u3 ports and FMREG shared by u2 ports on
mt8173/mt2701 are put back into each port; a new bank MISC for
u2 ports and CHIP for u3 ports are added on mt2712.

38
Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt
View File

@ -1,38 +0,0 @@
MediaTek Universal Flash Storage (UFS) M-PHY binding
--------------------------------------------------------
UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
Each UFS M-PHY node should have its own node.
To bind UFS M-PHY with UFS host controller, the controller node should
contain a phandle reference to UFS M-PHY node.
Required properties for UFS M-PHY nodes:
- compatible : Compatible list, contains the following controller:
"mediatek,mt8183-ufsphy" for ufs phy
persent on MT81xx chipsets.
- reg : Address and length of the UFS M-PHY register set.
- #phy-cells : This property shall be set to 0.
- clocks : List of phandle and clock specifier pairs.
- clock-names : List of clock input name strings sorted in the same
order as the clocks property. Following clocks are
mandatory.
"unipro": Unipro core control clock.
"mp": M-PHY core control clock.
Example:
ufsphy: phy@11fa0000 {
compatible = "mediatek,mt8183-ufsphy";
reg = <0 0x11fa0000 0 0xc000>;
#phy-cells = <0>;
clocks = <&infracfg_ao INFRACFG_AO_UNIPRO_SCK_CG>,
<&infracfg_ao INFRACFG_AO_UFS_MP_SAP_BCLK_CG>;
clock-names = "unipro", "mp";
};
ufshci@11270000 {
...
phys = <&ufsphy>;
};

109
Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt
View File

@ -1,109 +0,0 @@
MediaTek XS-PHY binding
--------------------------
The XS-PHY controller supports physical layer functionality for USB3.1
GEN2 controller on MediaTek SoCs.
Required properties (controller (parent) node):
- compatible : should be "mediatek,<soc-model>-xsphy", "mediatek,xsphy",
soc-model is the name of SoC, such as mt3611 etc;
when using "mediatek,xsphy" compatible string, you need SoC specific
ones in addition, one of:
- "mediatek,mt3611-xsphy"
- #address-cells, #size-cells : should use the same values as the root node
- ranges: must be present
Optional properties (controller (parent) node):
- reg : offset and length of register shared by multiple U3 ports,
exclude port's private register, if only U2 ports provided,
shouldn't use the property.
- mediatek,src-ref-clk-mhz : u32, frequency of reference clock for slew rate
calibrate
- mediatek,src-coef : u32, coefficient for slew rate calibrate, depends on
SoC process
Required nodes : a sub-node is required for each port the controller
provides. Address range information including the usual
'reg' property is used inside these nodes to describe
the controller's topology.
Required properties (port (child) node):
- reg : address and length of the register set for the port.
- clocks : a list of phandle + clock-specifier pairs, one for each
entry in clock-names
- clock-names : must contain
"ref": 48M reference clock for HighSpeed analog phy; and 26M
reference clock for SuperSpeedPlus analog phy, sometimes is
24M, 25M or 27M, depended on platform.
- #phy-cells : should be 1
cell after port phandle is phy type from:
- PHY_TYPE_USB2
- PHY_TYPE_USB3
The following optional properties are only for debug or HQA test
Optional properties (PHY_TYPE_USB2 port (child) node):
- mediatek,eye-src : u32, the value of slew rate calibrate
- mediatek,eye-vrt : u32, the selection of VRT reference voltage
- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage
- mediatek,efuse-intr : u32, the selection of Internal Resistor
Optional properties (PHY_TYPE_USB3 port (child) node):
- mediatek,efuse-intr : u32, the selection of Internal Resistor
- mediatek,efuse-tx-imp : u32, the selection of TX Impedance
- mediatek,efuse-rx-imp : u32, the selection of RX Impedance
Banks layout of xsphy
-------------------------------------------------------------
port offset bank
u2 port0 0x0000 MISC
0x0100 FMREG
0x0300 U2PHY_COM
u2 port1 0x1000 MISC
0x1100 FMREG
0x1300 U2PHY_COM
u2 port2 0x2000 MISC
...
u31 common 0x3000 DIG_GLB
0x3100 PHYA_GLB
u31 port0 0x3400 DIG_LN_TOP
0x3500 DIG_LN_TX0
0x3600 DIG_LN_RX0
0x3700 DIG_LN_DAIF
0x3800 PHYA_LN
u31 port1 0x3a00 DIG_LN_TOP
0x3b00 DIG_LN_TX0
0x3c00 DIG_LN_RX0
0x3d00 DIG_LN_DAIF
0x3e00 PHYA_LN
...
DIG_GLB & PHYA_GLB are shared by U31 ports.
Example:
u3phy: usb-phy@11c40000 {
compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
reg = <0 0x11c43000 0 0x0200>;
mediatek,src-ref-clk-mhz = <26>;
mediatek,src-coef = <17>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
u2port0: usb-phy@11c40000 {
reg = <0 0x11c40000 0 0x0400>;
clocks = <&clk48m>;
clock-names = "ref";
mediatek,eye-src = <4>;
#phy-cells = <1>;
};
u3port0: usb-phy@11c43000 {
reg = <0 0x11c43400 0 0x0500>;
clocks = <&clk26m>;
clock-names = "ref";
mediatek,efuse-intr = <28>;
#phy-cells = <1>;
};
};

22
Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
View File

@ -45,6 +45,12 @@ properties:
"#size-cells":
const: 0
vdda1v1-supply:
description: regulator providing 1V1 power supply to the PLL block
vdda1v8-supply:
description: regulator providing 1V8 power supply to the PLL block
#Required child nodes:
patternProperties:
@ -61,12 +67,6 @@ patternProperties:
phy-supply:
description: regulator providing 3V3 power supply to the PHY.
vdda1v1-supply:
description: regulator providing 1V1 power supply to the PLL block
vdda1v8-supply:
description: regulator providing 1V8 power supply to the PLL block
"#phy-cells":
enum: [ 0x0, 0x1 ]
@ -90,8 +90,6 @@ patternProperties:
required:
- reg
- phy-supply
- vdda1v1-supply
- vdda1v8-supply
- "#phy-cells"
additionalProperties: false
@ -102,6 +100,8 @@ required:
- clocks
- "#address-cells"
- "#size-cells"
- vdda1v1-supply
- vdda1v8-supply
- usb-phy@0
- usb-phy@1
@ -116,22 +116,20 @@ examples:
reg = <0x5a006000 0x1000>;
clocks = <&rcc USBPHY_K>;
resets = <&rcc USBPHY_R>;
vdda1v1-supply = <&reg11>;
vdda1v8-supply = <&reg18>;
#address-cells = <1>;
#size-cells = <0>;
usbphyc_port0: usb-phy@0 {
reg = <0>;
phy-supply = <&vdd_usb>;
vdda1v1-supply = <&reg11>;
vdda1v8-supply = <&reg18>;
#phy-cells = <0>;
};
usbphyc_port1: usb-phy@1 {
reg = <1>;
phy-supply = <&vdd_usb>;
vdda1v1-supply = <&reg11>;
vdda1v8-supply = <&reg18>;
#phy-cells = <1>;
};
};

97
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
View File

@ -25,19 +25,32 @@ properties:
- qcom,msm8998-qmp-pcie-phy
- qcom,msm8998-qmp-ufs-phy
- qcom,msm8998-qmp-usb3-phy
- qcom,sc8180x-qmp-ufs-phy
- qcom,sc8180x-qmp-usb3-phy
- qcom,sdm845-qhp-pcie-phy
- qcom,sdm845-qmp-pcie-phy
- qcom,sdm845-qmp-ufs-phy
- qcom,sdm845-qmp-usb3-uni-phy
- qcom,sm8150-qmp-ufs-phy
- qcom,sm8150-qmp-usb3-phy
- qcom,sm8150-qmp-usb3-uni-phy
- qcom,sm8250-qmp-ufs-phy
- qcom,sm8250-qmp-gen3x1-pcie-phy
- qcom,sm8250-qmp-gen3x2-pcie-phy
- qcom,sm8250-qmp-modem-pcie-phy
- qcom,sm8250-qmp-usb3-phy
- qcom,sm8250-qmp-usb3-uni-phy
- qcom,sm8350-qmp-ufs-phy
- qcom,sm8350-qmp-usb3-phy
- qcom,sm8350-qmp-usb3-uni-phy
- qcom,sdx55-qmp-usb3-uni-phy
reg:
minItems: 1
maxItems: 2
items:
- description: Address and length of PHY's common serdes block.
- description: Address and length of PHY's DP_COM control block.
"#clock-cells":
enum: [ 1, 2 ]
@ -131,6 +144,32 @@ allOf:
items:
- const: phy
- const: common
- if:
properties:
compatible:
contains:
enum:
- qcom,sdx55-qmp-usb3-uni-phy
then:
properties:
clocks:
items:
- description: Phy aux clock.
- description: Phy config clock.
- description: 19.2 MHz ref clk.
clock-names:
items:
- const: aux
- const: cfg_ahb
- const: ref
resets:
items:
- description: reset of phy block.
- description: phy common block reset.
reset-names:
items:
- const: phy
- const: common
- if:
properties:
compatible:
@ -285,6 +324,64 @@ allOf:
reset-names:
items:
- const: phy
- if:
properties:
compatible:
contains:
enum:
- qcom,sm8150-qmp-usb3-phy
- qcom,sm8150-qmp-usb3-uni-phy
- qcom,sm8250-qmp-usb3-uni-phy
- qcom,sm8350-qmp-usb3-uni-phy
then:
properties:
clocks:
items:
- description: Phy aux clock.
- description: 19.2 MHz ref clk source.
- description: 19.2 MHz ref clk.
- description: Phy common block aux clock.
clock-names:
items:
- const: aux
- const: ref_clk_src
- const: ref
- const: com_aux
resets:
items:
- description: reset of phy block.
- description: phy common block reset.
reset-names:
items:
- const: phy
- const: common
- if:
properties:
compatible:
contains:
enum:
- qcom,sm8250-qmp-usb3-phy
- qcom,sm8350-qmp-usb3-phy
then:
properties:
clocks:
items:
- description: Phy aux clock.
- description: 19.2 MHz ref clk.
- description: Phy common block aux clock.
clock-names:
items:
- const: aux
- const: ref_clk_src
- const: com_aux
resets:
items:
- description: reset of phy block.
- description: phy common block reset.
reset-names:
items:
- const: phy
- const: common
examples:
- |

2
Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
View File

@ -21,6 +21,8 @@ properties:
- qcom,ipq8074-qusb2-phy
- qcom,msm8996-qusb2-phy
- qcom,msm8998-qusb2-phy
- qcom,sdm660-qusb2-phy
- qcom,ipq6018-qusb2-phy
- items:
- enum:
- qcom,sc7180-qusb2-phy

1
Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
View File

@ -16,6 +16,7 @@ properties:
compatible:
enum:
- qcom,usb-hs-28nm-femtophy
- qcom,usb-hs-28nm-mdm9607
reg:
maxItems: 1

2
Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
View File

@ -17,6 +17,8 @@ properties:
enum:
- qcom,usb-snps-hs-7nm-phy
- qcom,sm8150-usb-hs-phy
- qcom,sm8250-usb-hs-phy
- qcom,sm8350-usb-hs-phy
- qcom,usb-snps-femto-v2-phy
reg:

2
Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
View File

@ -151,7 +151,7 @@ patternProperties:
WIZ node should have '1' subnode for the SERDES. It could be either
Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the
bindings specified in
Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
Torrent SERDES should follow the bindings specified in
Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml

3
drivers/phy/broadcom/Kconfig
View File

@ -91,10 +91,11 @@ config PHY_BRCM_SATA
config PHY_BRCM_USB
tristate "Broadcom STB USB PHY driver"
depends on ARCH_BRCMSTB || COMPILE_TEST
depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
depends on OF
select GENERIC_PHY
select SOC_BRCMSTB
default ARCH_BCM4908
default ARCH_BRCMSTB
help
Enable this to support the Broadcom STB USB PHY.

18
drivers/phy/broadcom/phy-brcm-usb.c
View File

@ -11,6 +11,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
@ -34,7 +35,7 @@ struct value_to_name_map {
};
struct match_chip_info {
void *init_func;
void (*init_func)(struct brcm_usb_init_params *params);
u8 required_regs[BRCM_REGS_MAX + 1];
u8 optional_reg;
};
@ -285,6 +286,10 @@ static const struct match_chip_info chip_info_7445 = {
};
static const struct of_device_id brcm_usb_dt_ids[] = {
{
.compatible = "brcm,bcm4908-usb-phy",
.data = &chip_info_7445,
},
{
.compatible = "brcm,bcm7216-usb-phy",
.data = &chip_info_7216,
@ -427,8 +432,6 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
struct device_node *dn = pdev->dev.of_node;
int err;
const char *mode;
const struct of_device_id *match;
void (*dvr_init)(struct brcm_usb_init_params *params);
const struct match_chip_info *info;
struct regmap *rmap;
int x;
@ -441,10 +444,11 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
priv->ini.family_id = brcmstb_get_family_id();
priv->ini.product_id = brcmstb_get_product_id();
match = of_match_node(brcm_usb_dt_ids, dev->of_node);
info = match->data;
dvr_init = info->init_func;
(*dvr_init)(&priv->ini);
info = of_device_get_match_data(&pdev->dev);
if (!info)
return -ENOENT;
info->init_func(&priv->ini);
dev_dbg(dev, "Best mapping table is for %s\n",
priv->ini.family_name);

1
drivers/phy/cadence/phy-cadence-torrent.c
View File

@ -2298,6 +2298,7 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev)
if (total_num_lanes > MAX_NUM_LANES) {
dev_err(dev, "Invalid lane configuration\n");
ret = -EINVAL;
goto put_lnk_rst;
}

23
drivers/phy/ingenic/phy-ingenic-usb.c
View File

@ -82,18 +82,7 @@
#define USBPCR1_PORT_RST BIT(21)
#define USBPCR1_WORD_IF_16BIT BIT(19)
enum ingenic_usb_phy_version {
ID_JZ4770,
ID_JZ4775,
ID_JZ4780,
ID_X1000,
ID_X1830,
ID_X2000,
};
struct ingenic_soc_info {
enum ingenic_usb_phy_version version;
void (*usb_phy_init)(struct phy *phy);
};
@ -300,38 +289,26 @@ static void x2000_usb_phy_init(struct phy *phy)
}
static const struct ingenic_soc_info jz4770_soc_info = {
.version = ID_JZ4770,
.usb_phy_init = jz4770_usb_phy_init,
};
static const struct ingenic_soc_info jz4775_soc_info = {
.version = ID_JZ4775,
.usb_phy_init = jz4775_usb_phy_init,
};
static const struct ingenic_soc_info jz4780_soc_info = {
.version = ID_JZ4780,
.usb_phy_init = jz4780_usb_phy_init,
};
static const struct ingenic_soc_info x1000_soc_info = {
.version = ID_X1000,
.usb_phy_init = x1000_usb_phy_init,
};
static const struct ingenic_soc_info x1830_soc_info = {
.version = ID_X1830,
.usb_phy_init = x1830_usb_phy_init,
};
static const struct ingenic_soc_info x2000_soc_info = {
.version = ID_X2000,
.usb_phy_init = x2000_usb_phy_init,
};

2
drivers/phy/mediatek/phy-mtk-mipi-dsi.c
View File

@ -234,7 +234,7 @@ static const struct of_device_id mtk_mipi_tx_match[] = {
{ },
};
struct platform_driver mtk_mipi_tx_driver = {
static struct platform_driver mtk_mipi_tx_driver = {
.probe = mtk_mipi_tx_probe,
.remove = mtk_mipi_tx_remove,
.driver = {

2
drivers/phy/motorola/phy-cpcap-usb.c
View File

@ -143,7 +143,7 @@ static bool cpcap_usb_vbus_valid(struct cpcap_phy_ddata *ddata)
error = iio_read_channel_processed(ddata->vbus, &value);
if (error >= 0)
return value > 3900 ? true : false;
return value > 3900;
dev_err(ddata->dev, "error reading VBUS: %i\n", error);

430
drivers/phy/qualcomm/phy-qcom-qmp.c
View File

@ -212,6 +212,15 @@ static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
};
static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_SW_RESET] = 0x00,
[QPHY_START_CTRL] = 0x44,
[QPHY_PCS_STATUS] = 0x14,
[QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
[QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
};
static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_START_CTRL] = 0x00,
[QPHY_PCS_READY_STATUS] = 0x160,
@ -1974,6 +1983,291 @@ static const struct qmp_phy_init_tbl sm8250_qmp_gen3x2_pcie_pcs_misc_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
};
static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x80),
QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x08),
};
static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x26),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x048),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x09),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
};
static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x42),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_INITVAL2, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x18),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x18),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x19),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x98),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x18),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x18),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x65),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
/* Rate B */
QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06),
};
static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xf5),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x09),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x09),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c),
};
static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_BAND, 0x18),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf1),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x80),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0e),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x1b),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x10),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x6d),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x6d),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xed),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3b),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x3c),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xe0),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xc8),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xc8),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x3b),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xb7),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_LOW, 0xe0),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH, 0xc8),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH2, 0xc8),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x3b),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0xb7),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
};
static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
};
static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
};
static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb),
QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1),
QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10),
};
static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
};
static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
};
static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
};
static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
};
/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
/* phy-type - PCIE/UFS/USB */
@ -2183,6 +2477,11 @@ static const char * const sdm845_ufs_phy_clk_l[] = {
"ref", "ref_aux",
};
/* usb3 phy on sdx55 doesn't have com_aux clock */
static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
"aux", "cfg_ahb", "ref"
};
/* list of resets */
static const char * const msm8996_pciephy_reset_l[] = {
"phy", "common", "cfg",
@ -2824,6 +3123,117 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
.pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
};
static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
.serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
.tx_tbl = sdx55_usb3_uniphy_tx_tbl,
.tx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_tx_tbl),
.rx_tbl = sdx55_usb3_uniphy_rx_tbl,
.rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
.pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
.clk_list = qmp_v4_sdx55_usbphy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3_uniphy_regs_layout,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
.pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
};
static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
.type = PHY_TYPE_UFS,
.nlanes = 2,
.serdes_tbl = sm8350_ufsphy_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl),
.tx_tbl = sm8350_ufsphy_tx_tbl,
.tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl),
.rx_tbl = sm8350_ufsphy_rx_tbl,
.rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl),
.pcs_tbl = sm8350_ufsphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl),
.clk_list = sdm845_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = sm8150_ufsphy_regs_layout,
.start_ctrl = SERDES_START,
.pwrdn_ctrl = SW_PWRDN,
.is_dual_lane_phy = true,
};
static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
.serdes_tbl = sm8150_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
.tx_tbl = sm8350_usb3_tx_tbl,
.tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl),
.rx_tbl = sm8350_usb3_rx_tbl,
.rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
.pcs_tbl = sm8350_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
.clk_list = qmp_v4_sm8250_usbphy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
.pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
.has_phy_dp_com_ctrl = true,
.is_dual_lane_phy = true,
};
static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
.serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
.tx_tbl = sm8350_usb3_uniphy_tx_tbl,
.tx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
.rx_tbl = sm8350_usb3_uniphy_rx_tbl,
.rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
.pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = sm8350_usb3_uniphy_regs_layout,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
.pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
};
static void qcom_qmp_phy_configure_lane(void __iomem *base,
const unsigned int *regs,
const struct qmp_phy_init_tbl tbl[],
@ -3135,7 +3545,7 @@ static int qcom_qmp_phy_configure_dp_phy(struct qmp_phy *qphy)
static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
u8 val;
qphy->dp_aux_cfg++;
@ -4128,6 +4538,12 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,sc7180-qmp-usb3-dp-phy",
/* It's a combo phy */
}, {
.compatible = "qcom,sc8180x-qmp-ufs-phy",
.data = &sm8150_ufsphy_cfg,
}, {
.compatible = "qcom,sc8180x-qmp-usb3-phy",
.data = &sm8150_usb3phy_cfg,
}, {
.compatible = "qcom,sdm845-qhp-pcie-phy",
.data = &sdm845_qhp_pciephy_cfg,
@ -4170,9 +4586,21 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy",
.data = &sm8250_qmp_gen3x2_pciephy_cfg,
}, {
.compatible = "qcom,sm8350-qmp-ufs-phy",
.data = &sm8350_ufsphy_cfg,
}, {
.compatible = "qcom,sm8250-qmp-modem-pcie-phy",
.data = &sm8250_qmp_gen3x2_pciephy_cfg,
}, {
.compatible = "qcom,sdx55-qmp-usb3-uni-phy",
.data = &sdx55_usb3_uniphy_cfg,
}, {
.compatible = "qcom,sm8350-qmp-usb3-phy",
.data = &sm8350_usb3phy_cfg,
}, {
.compatible = "qcom,sm8350-qmp-usb3-uni-phy",
.data = &sm8350_usb3_uniphy_cfg,
},
{ },
};

147
drivers/phy/qualcomm/phy-qcom-qmp.h
View File

@ -824,4 +824,151 @@
#define QPHY_V4_PCS_PCIE_PRESET_P10_PRE 0xbc
#define QPHY_V4_PCS_PCIE_PRESET_P10_POST 0xe0
/* Only for QMP V5 PHY - QSERDES COM registers */
#define QSERDES_V5_COM_PLL_IVCO 0x058
#define QSERDES_V5_COM_CP_CTRL_MODE0 0x074
#define QSERDES_V5_COM_CP_CTRL_MODE1 0x078
#define QSERDES_V5_COM_PLL_RCTRL_MODE0 0x07c
#define QSERDES_V5_COM_PLL_RCTRL_MODE1 0x080
#define QSERDES_V5_COM_PLL_CCTRL_MODE0 0x084
#define QSERDES_V5_COM_PLL_CCTRL_MODE1 0x088
#define QSERDES_V5_COM_SYSCLK_EN_SEL 0x094
#define QSERDES_V5_COM_LOCK_CMP_EN 0x0a4
#define QSERDES_V5_COM_LOCK_CMP1_MODE0 0x0ac
#define QSERDES_V5_COM_LOCK_CMP2_MODE0 0x0b0
#define QSERDES_V5_COM_LOCK_CMP1_MODE1 0x0b4
#define QSERDES_V5_COM_DEC_START_MODE0 0x0bc
#define QSERDES_V5_COM_LOCK_CMP2_MODE1 0x0b8
#define QSERDES_V5_COM_DEC_START_MODE1 0x0c4
#define QSERDES_V5_COM_VCO_TUNE_MAP 0x10c
#define QSERDES_V5_COM_VCO_TUNE_INITVAL2 0x124
#define QSERDES_V5_COM_HSCLK_SEL 0x158
#define QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL 0x15c
#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x1ac
#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1b0
#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x1b4
#define QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL 0x1bc
#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x1b8
/* Only for QMP V5 PHY - TX registers */
#define QSERDES_V5_TX_RES_CODE_LANE_TX 0x34
#define QSERDES_V5_TX_RES_CODE_LANE_RX 0x38
#define QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX 0x3c
#define QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX 0x40
#define QSERDES_V5_TX_LANE_MODE_1 0x84
#define QSERDES_V5_TX_LANE_MODE_2 0x88
#define QSERDES_V5_TX_LANE_MODE_3 0x8c
#define QSERDES_V5_TX_LANE_MODE_4 0x90
#define QSERDES_V5_TX_LANE_MODE_5 0x94
#define QSERDES_V5_TX_RCV_DETECT_LVL_2 0xa4
#define QSERDES_V5_TX_TRAN_DRVR_EMP_EN 0xc0
#define QSERDES_V5_TX_PI_QEC_CTRL 0xe4
#define QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0x178
#define QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0x17c
#define QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0x180
#define QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0x184
/* Only for QMP V5 PHY - RX registers */
#define QSERDES_V5_RX_UCDR_FO_GAIN 0x008
#define QSERDES_V5_RX_UCDR_SO_GAIN 0x014
#define QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN 0x030
#define QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034
#define QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c
#define QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH 0x040
#define QSERDES_V5_RX_UCDR_PI_CONTROLS 0x044
#define QSERDES_V5_RX_UCDR_PI_CTRL2 0x048
#define QSERDES_V5_RX_UCDR_SB2_THRESH1 0x04c
#define QSERDES_V5_RX_UCDR_SB2_THRESH2 0x050
#define QSERDES_V5_RX_UCDR_SB2_GAIN1 0x054
#define QSERDES_V5_RX_UCDR_SB2_GAIN2 0x058
#define QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE 0x060
#define QSERDES_V5_RX_RCLK_AUXDATA_SEL 0x064
#define QSERDES_V5_RX_AC_JTAG_ENABLE 0x068
#define QSERDES_V5_RX_AC_JTAG_MODE 0x078
#define QSERDES_V5_RX_RX_TERM_BW 0x080
#define QSERDES_V5_RX_VGA_CAL_CNTRL1 0x0d4
#define QSERDES_V5_RX_VGA_CAL_CNTRL2 0x0d8
#define QSERDES_V5_RX_GM_CAL 0x0dc
#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1 0x0e8
#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2 0x0ec
#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3 0x0f0
#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4 0x0f4
#define QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW 0x0f8
#define QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH 0x0fc
#define QSERDES_V5_RX_RX_IDAC_MEASURE_TIME 0x100
#define QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110
#define QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x114
#define QSERDES_V5_RX_SIGDET_ENABLES 0x118
#define QSERDES_V5_RX_SIGDET_CNTRL 0x11c
#define QSERDES_V5_RX_SIGDET_LVL 0x120
#define QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL 0x124
#define QSERDES_V5_RX_RX_BAND 0x128
#define QSERDES_V5_RX_RX_MODE_00_LOW 0x15c
#define QSERDES_V5_RX_RX_MODE_00_HIGH 0x160
#define QSERDES_V5_RX_RX_MODE_00_HIGH2 0x164
#define QSERDES_V5_RX_RX_MODE_00_HIGH3 0x168
#define QSERDES_V5_RX_RX_MODE_00_HIGH4 0x16c
#define QSERDES_V5_RX_RX_MODE_01_LOW 0x170
#define QSERDES_V5_RX_RX_MODE_01_HIGH 0x174
#define QSERDES_V5_RX_RX_MODE_01_HIGH2 0x178
#define QSERDES_V5_RX_RX_MODE_01_HIGH3 0x17c
#define QSERDES_V5_RX_RX_MODE_01_HIGH4 0x180
#define QSERDES_V5_RX_RX_MODE_10_LOW 0x184
#define QSERDES_V5_RX_RX_MODE_10_HIGH 0x188
#define QSERDES_V5_RX_RX_MODE_10_HIGH2 0x18c
#define QSERDES_V5_RX_RX_MODE_10_HIGH3 0x190
#define QSERDES_V5_RX_RX_MODE_10_HIGH4 0x194
#define QSERDES_V5_RX_DFE_EN_TIMER 0x1a0
#define QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET 0x1a4
#define QSERDES_V5_RX_DCC_CTRL1 0x1a8
#define QSERDES_V5_RX_VTH_CODE 0x1b0
/* Only for QMP V5 PHY - UFS PCS registers */
#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c
#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010
#define QPHY_V5_PCS_UFS_PLL_CNTL 0x02c
#define QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x030
#define QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x038
#define QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074
#define QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0b4
#define QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL 0x124
#define QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME 0x150
#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1 0x154
#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2 0x158
#define QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND 0x160
#define QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND 0x168
#define QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1 0x1d8
#define QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1 0x1e0
/* Only for QMP V5 PHY - USB3 have different offsets than V4 */
#define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1 0x300
#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS 0x304
#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x308
#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2 0x30c
#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x310
#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x314
#define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x318
#define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART 0x31c
#define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL 0x320
#define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START 0x324
#define QPHY_V5_PCS_USB3_LFPS_CONFIG1 0x328
#define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME 0x32c
#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME 0x330
#define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME 0x334
#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2 0x338
#define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x33c
#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x340
#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x344
#define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD 0x348
#define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY 0x34c
#define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH 0x350
#define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL 0x354
#define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x358
#define QPHY_V5_PCS_USB3_TEST_CONTROL 0x35c
#define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL 0x360
/* Only for QMP V5 PHY - UNI has 0x1000 offset for PCS_USB3 regs */
#define QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL 0x1018
#define QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2 0x103c
#endif

74
drivers/phy/qualcomm/phy-qcom-qusb2.c
View File

@ -22,6 +22,7 @@
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#define QUSB2PHY_PLL 0x0
#define QUSB2PHY_PLL_TEST 0x04
#define CLK_REF_SEL BIT(7)
@ -135,6 +136,35 @@ enum qusb2phy_reg_layout {
QUSB2PHY_INTR_CTRL,
};
static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xF8),
QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3),
QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0),
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
};
static const unsigned int ipq6018_regs_layout[] = {
[QUSB2PHY_PLL_STATUS] = 0x38,
[QUSB2PHY_PORT_TUNE1] = 0x80,
[QUSB2PHY_PORT_TUNE2] = 0x84,
[QUSB2PHY_PORT_TUNE3] = 0x88,
[QUSB2PHY_PORT_TUNE4] = 0x8C,
[QUSB2PHY_PORT_TUNE5] = 0x90,
[QUSB2PHY_PORT_TEST1] = 0x98,
[QUSB2PHY_PORT_TEST2] = 0x9C,
[QUSB2PHY_PORT_POWERDOWN] = 0xB4,
[QUSB2PHY_INTR_CTRL] = 0xBC,
};
static const unsigned int msm8996_regs_layout[] = {
[QUSB2PHY_PLL_STATUS] = 0x38,
[QUSB2PHY_PORT_TUNE1] = 0x80,
@ -245,6 +275,9 @@ struct qusb2_phy_cfg {
/* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */
bool has_pll_override;
/* true if PHY default clk scheme is single-ended */
bool se_clk_scheme_default;
};
static const struct qusb2_phy_cfg msm8996_phy_cfg = {
@ -253,6 +286,7 @@ static const struct qusb2_phy_cfg msm8996_phy_cfg = {
.regs = msm8996_regs_layout,
.has_pll_test = true,
.se_clk_scheme_default = true,
.disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
.mask_core_ready = PLL_LOCKED,
.autoresume_en = BIT(3),
@ -266,10 +300,22 @@ static const struct qusb2_phy_cfg msm8998_phy_cfg = {
.disable_ctrl = POWER_DOWN,
.mask_core_ready = CORE_READY_STATUS,
.has_pll_override = true,
.se_clk_scheme_default = true,
.autoresume_en = BIT(0),
.update_tune1_with_efuse = true,
};
static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
.tbl = ipq6018_init_tbl,
.tbl_num = ARRAY_SIZE(ipq6018_init_tbl),
.regs = ipq6018_regs_layout,
.disable_ctrl = POWER_DOWN,
.mask_core_ready = PLL_LOCKED,
/* autoresume not used */
.autoresume_en = BIT(0),
};
static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
.tbl = qusb2_v2_init_tbl,
.tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl),
@ -279,10 +325,23 @@ static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
POWER_DOWN),
.mask_core_ready = CORE_READY_STATUS,
.has_pll_override = true,
.se_clk_scheme_default = true,
.autoresume_en = BIT(0),
.update_tune1_with_efuse = true,
};
static const struct qusb2_phy_cfg sdm660_phy_cfg = {
.tbl = msm8996_init_tbl,
.tbl_num = ARRAY_SIZE(msm8996_init_tbl),
.regs = msm8996_regs_layout,
.has_pll_test = true,
.se_clk_scheme_default = false,
.disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
.mask_core_ready = PLL_LOCKED,
.autoresume_en = BIT(3),
};
static const char * const qusb2_phy_vreg_names[] = {
"vdda-pll", "vdda-phy-dpdm",
};
@ -701,8 +760,13 @@ static int qusb2_phy_init(struct phy *phy)
/* Required to get phy pll lock successfully */
usleep_range(150, 160);
/* Default is single-ended clock on msm8996 */
qphy->has_se_clk_scheme = true;
/*
* Not all the SoCs have got a readable TCSR_PHY_CLK_SCHEME
* register in the TCSR so, if there's none, use the default
* value hardcoded in the configuration.
*/
qphy->has_se_clk_scheme = cfg->se_clk_scheme_default;
/*
* read TCSR_PHY_CLK_SCHEME register to check if single-ended
* clock scheme is selected. If yes, then disable differential
@ -810,6 +874,9 @@ static const struct phy_ops qusb2_phy_gen_ops = {
static const struct of_device_id qusb2_phy_of_match_table[] = {
{
.compatible = "qcom,ipq6018-qusb2-phy",
.data = &ipq6018_phy_cfg,
}, {
.compatible = "qcom,ipq8074-qusb2-phy",
.data = &msm8996_phy_cfg,
}, {
@ -818,6 +885,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
}, {
.compatible = "qcom,msm8998-qusb2-phy",
.data = &msm8998_phy_cfg,
}, {
.compatible = "qcom,sdm660-qusb2-phy",
.data = &sdm660_phy_cfg,
}, {
/*
* Deprecated. Only here to support legacy device

13
drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
View File

@ -401,13 +401,26 @@ static const struct hsphy_init_seq init_seq_femtophy[] = {
HSPHY_INIT_CFG(0x90, 0x60, 0),
};
static const struct hsphy_init_seq init_seq_mdm9607[] = {
HSPHY_INIT_CFG(0x80, 0x44, 0),
HSPHY_INIT_CFG(0x81, 0x38, 0),
HSPHY_INIT_CFG(0x82, 0x24, 0),
HSPHY_INIT_CFG(0x83, 0x13, 0),
};
static const struct hsphy_data hsphy_data_femtophy = {
.init_seq = init_seq_femtophy,
.init_seq_num = ARRAY_SIZE(init_seq_femtophy),
};
static const struct hsphy_data hsphy_data_mdm9607 = {
.init_seq = init_seq_mdm9607,
.init_seq_num = ARRAY_SIZE(init_seq_mdm9607),
};
static const struct of_device_id qcom_snps_hsphy_match[] = {
{ .compatible = "qcom,usb-hs-28nm-femtophy", .data = &hsphy_data_femtophy, },
{ .compatible = "qcom,usb-hs-28nm-mdm9607", .data = &hsphy_data_mdm9607, },
{ },
};
MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_match);

222
drivers/phy/st/phy-stm32-usbphyc.c
View File

@ -8,7 +8,7 @@
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_platform.h>
@ -17,6 +17,7 @@
#define STM32_USBPHYC_PLL 0x0
#define STM32_USBPHYC_MISC 0x8
#define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100))
#define STM32_USBPHYC_VERSION 0x3F4
/* STM32_USBPHYC_PLL bit fields */
@ -32,19 +33,16 @@
/* STM32_USBPHYC_MISC bit fields */
#define SWITHOST BIT(0)
/* STM32_USBPHYC_MONITOR bit fields */
#define STM32_USBPHYC_MON_OUT GENMASK(3, 0)
#define STM32_USBPHYC_MON_SEL GENMASK(8, 4)
#define STM32_USBPHYC_MON_SEL_LOCKP 0x1F
#define STM32_USBPHYC_MON_OUT_LOCKP BIT(3)
/* STM32_USBPHYC_VERSION bit fields */
#define MINREV GENMASK(3, 0)
#define MAJREV GENMASK(7, 4)
static const char * const supplies_names[] = {
"vdda1v1", /* 1V1 */
"vdda1v8", /* 1V8 */
};
#define NUM_SUPPLIES ARRAY_SIZE(supplies_names)
#define PLL_LOCK_TIME_US 100
#define PLL_PWR_DOWN_TIME_US 5
#define PLL_FVCO_MHZ 2880
#define PLL_INFF_MIN_RATE_HZ 19200000
#define PLL_INFF_MAX_RATE_HZ 38400000
@ -58,7 +56,6 @@ struct pll_params {
struct stm32_usbphyc_phy {
struct phy *phy;
struct stm32_usbphyc *usbphyc;
struct regulator_bulk_data supplies[NUM_SUPPLIES];
u32 index;
bool active;
};
@ -70,6 +67,9 @@ struct stm32_usbphyc {
struct reset_control *rst;
struct stm32_usbphyc_phy **phys;
int nphys;
struct regulator *vdda1v1;
struct regulator *vdda1v8;
atomic_t n_pll_cons;
int switch_setup;
};
@ -83,6 +83,41 @@ static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits)
writel_relaxed(readl_relaxed(reg) & ~bits, reg);
}
static int stm32_usbphyc_regulators_enable(struct stm32_usbphyc *usbphyc)
{
int ret;
ret = regulator_enable(usbphyc->vdda1v1);
if (ret)
return ret;
ret = regulator_enable(usbphyc->vdda1v8);
if (ret)
goto vdda1v1_disable;
return 0;
vdda1v1_disable:
regulator_disable(usbphyc->vdda1v1);
return ret;
}
static int stm32_usbphyc_regulators_disable(struct stm32_usbphyc *usbphyc)
{
int ret;
ret = regulator_disable(usbphyc->vdda1v8);
if (ret)
return ret;
ret = regulator_disable(usbphyc->vdda1v1);
if (ret)
return ret;
return 0;
}
static void stm32_usbphyc_get_pll_params(u32 clk_rate,
struct pll_params *pll_params)
{
@ -142,83 +177,106 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
return 0;
}
static bool stm32_usbphyc_has_one_phy_active(struct stm32_usbphyc *usbphyc)
static int __stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
{
int i;
void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
u32 pllen;
for (i = 0; i < usbphyc->nphys; i++)
if (usbphyc->phys[i]->active)
return true;
stm32_usbphyc_clr_bits(pll_reg, PLLEN);
return false;
/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
if (readl_relaxed_poll_timeout(pll_reg, pllen, !(pllen & PLLEN), 5, 50))
dev_err(usbphyc->dev, "PLL not reset\n");
return stm32_usbphyc_regulators_disable(usbphyc);
}
static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
{
/* Check if a phy port is still active or clk48 in use */
if (atomic_dec_return(&usbphyc->n_pll_cons) > 0)
return 0;
return __stm32_usbphyc_pll_disable(usbphyc);
}
static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc)
{
void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
bool pllen = (readl_relaxed(pll_reg) & PLLEN);
bool pllen = readl_relaxed(pll_reg) & PLLEN;
int ret;
/* Check if one phy port has already configured the pll */
if (pllen && stm32_usbphyc_has_one_phy_active(usbphyc))
/*
* Check if a phy port or clk48 prepare has configured the pll
* and ensure the PLL is enabled
*/
if (atomic_inc_return(&usbphyc->n_pll_cons) > 1 && pllen)
return 0;
if (pllen) {
stm32_usbphyc_clr_bits(pll_reg, PLLEN);
/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
udelay(PLL_PWR_DOWN_TIME_US);
/*
* PLL shouldn't be enabled without known consumer,
* disable it and reinit n_pll_cons
*/
dev_warn(usbphyc->dev, "PLL enabled without known consumers\n");
ret = __stm32_usbphyc_pll_disable(usbphyc);
if (ret)
return ret;
}
ret = stm32_usbphyc_regulators_enable(usbphyc);
if (ret)
goto dec_n_pll_cons;
ret = stm32_usbphyc_pll_init(usbphyc);
if (ret)
return ret;
goto reg_disable;
stm32_usbphyc_set_bits(pll_reg, PLLEN);
/* Wait for maximum lock time */
udelay(PLL_LOCK_TIME_US);
if (!(readl_relaxed(pll_reg) & PLLEN)) {
dev_err(usbphyc->dev, "PLLEN not set\n");
return -EIO;
}
return 0;
}
static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
{
void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
reg_disable:
stm32_usbphyc_regulators_disable(usbphyc);
/* Check if other phy port active */
if (stm32_usbphyc_has_one_phy_active(usbphyc))
return 0;
dec_n_pll_cons:
atomic_dec(&usbphyc->n_pll_cons);
stm32_usbphyc_clr_bits(pll_reg, PLLEN);
/* Wait for minimum width of powerdown pulse (ENABLE = Low) */
udelay(PLL_PWR_DOWN_TIME_US);
if (readl_relaxed(pll_reg) & PLLEN) {
dev_err(usbphyc->dev, "PLL not reset\n");
return -EIO;
}
return 0;
return ret;
}
static int stm32_usbphyc_phy_init(struct phy *phy)
{
struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc;
u32 reg_mon = STM32_USBPHYC_MONITOR(usbphyc_phy->index);
u32 monsel = FIELD_PREP(STM32_USBPHYC_MON_SEL,
STM32_USBPHYC_MON_SEL_LOCKP);
u32 monout;
int ret;
ret = stm32_usbphyc_pll_enable(usbphyc);
if (ret)
return ret;
/* Check that PLL Lock input to PHY is High */
writel_relaxed(monsel, usbphyc->base + reg_mon);
ret = readl_relaxed_poll_timeout(usbphyc->base + reg_mon, monout,
(monout & STM32_USBPHYC_MON_OUT_LOCKP),
100, 1000);
if (ret) {
dev_err(usbphyc->dev, "PLL Lock input to PHY is Low (val=%x)\n",
(u32)(monout & STM32_USBPHYC_MON_OUT));
goto pll_disable;
}
usbphyc_phy->active = true;
return 0;
pll_disable:
return stm32_usbphyc_pll_disable(usbphyc);
}
static int stm32_usbphyc_phy_exit(struct phy *phy)
@ -231,25 +289,9 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)
return stm32_usbphyc_pll_disable(usbphyc);
}
static int stm32_usbphyc_phy_power_on(struct phy *phy)
{
struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
return regulator_bulk_enable(NUM_SUPPLIES, usbphyc_phy->supplies);
}
static int stm32_usbphyc_phy_power_off(struct phy *phy)
{
struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
return regulator_bulk_disable(NUM_SUPPLIES, usbphyc_phy->supplies);
}
static const struct phy_ops stm32_usbphyc_phy_ops = {
.init = stm32_usbphyc_phy_init,
.exit = stm32_usbphyc_phy_exit,
.power_on = stm32_usbphyc_phy_power_on,
.power_off = stm32_usbphyc_phy_power_off,
.owner = THIS_MODULE,
};
@ -312,7 +354,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *child, *np = dev->of_node;
struct phy_provider *phy_provider;
u32 version;
u32 pllen, version;
int ret, port = 0;
usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL);
@ -344,6 +386,19 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
ret = PTR_ERR(usbphyc->rst);
if (ret == -EPROBE_DEFER)
goto clk_disable;
stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);
}
/*
* Wait for minimum width of powerdown pulse (ENABLE = Low):
* we have to ensure the PLL is disabled before phys initialization.
*/
if (readl_relaxed_poll_timeout(usbphyc->base + STM32_USBPHYC_PLL,
pllen, !(pllen & PLLEN), 5, 50)) {
dev_warn(usbphyc->dev, "PLL not reset\n");
ret = -EPROBE_DEFER;
goto clk_disable;
}
usbphyc->switch_setup = -EINVAL;
@ -355,11 +410,26 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
goto clk_disable;
}
usbphyc->vdda1v1 = devm_regulator_get(dev, "vdda1v1");
if (IS_ERR(usbphyc->vdda1v1)) {
ret = PTR_ERR(usbphyc->vdda1v1);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get vdda1v1 supply: %d\n", ret);
goto clk_disable;
}
usbphyc->vdda1v8 = devm_regulator_get(dev, "vdda1v8");
if (IS_ERR(usbphyc->vdda1v8)) {
ret = PTR_ERR(usbphyc->vdda1v8);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get vdda1v8 supply: %d\n", ret);
goto clk_disable;
}
for_each_child_of_node(np, child) {
struct stm32_usbphyc_phy *usbphyc_phy;
struct phy *phy;
u32 index;
int i;
phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops);
if (IS_ERR(phy)) {
@ -377,18 +447,6 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
goto put_child;
}
for (i = 0; i < NUM_SUPPLIES; i++)
usbphyc_phy->supplies[i].supply = supplies_names[i];
ret = devm_regulator_bulk_get(&phy->dev, NUM_SUPPLIES,
usbphyc_phy->supplies);
if (ret) {
if (ret != -EPROBE_DEFER)
dev_err(&phy->dev,
"failed to get regulators: %d\n", ret);
goto put_child;
}
ret = of_property_read_u32(child, "reg", &index);
if (ret || index > usbphyc->nphys) {
dev_err(&phy->dev, "invalid reg property: %d\n", ret);
@ -432,6 +490,12 @@ clk_disable:
static int stm32_usbphyc_remove(struct platform_device *pdev)
{
struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev);
int port;
/* Ensure PHYs are not active, to allow PLL disabling */
for (port = 0; port < usbphyc->nphys; port++)
if (usbphyc->phys[port]->active)
stm32_usbphyc_phy_exit(usbphyc->phys[port]->phy);
clk_disable_unprepare(usbphyc->clk);

11
drivers/phy/xilinx/phy-zynqmp.c
View File

@ -874,13 +874,10 @@ static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev)
snprintf(name, sizeof(name), "ref%u", refclk);
clk = devm_clk_get_optional(gtr_dev->dev, name);
if (IS_ERR(clk)) {
if (PTR_ERR(clk) != -EPROBE_DEFER)
dev_err(gtr_dev->dev,
"Failed to get reference clock %u: %ld\n",
refclk, PTR_ERR(clk));
return PTR_ERR(clk);
}
if (IS_ERR(clk))
return dev_err_probe(gtr_dev->dev, PTR_ERR(clk),
"Failed to get reference clock %u\n",
refclk);
if (!clk)
continue;