2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00

Merge branch 'for-3.2' into for-3.3

Conflicts:
	sound/soc/codecs/wm8940.c
This commit is contained in:
Mark Brown 2011-11-08 01:17:30 +00:00
commit 4633fa48fb
10 changed files with 80 additions and 32 deletions

View File

@ -6001,7 +6001,7 @@ F: sound/
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
M: Liam Girdwood <lrg@ti.com>
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://alsa-project.org/main/index.php/ASoC
S: Supported

View File

@ -1962,6 +1962,21 @@
#define WM8958_MICB2_DISCH_SHIFT 0 /* MICB2_DISCH */
#define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */
/*
* R210 (0xD2) - Mic Detect 3
*/
#define WM8958_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */
#define WM8958_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */
#define WM8958_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */
#define WM8958_MICD_VALID 0x0002 /* MICD_VALID */
#define WM8958_MICD_VALID_MASK 0x0002 /* MICD_VALID */
#define WM8958_MICD_VALID_SHIFT 1 /* MICD_VALID */
#define WM8958_MICD_VALID_WIDTH 1 /* MICD_VALID */
#define WM8958_MICD_STS 0x0001 /* MICD_STS */
#define WM8958_MICD_STS_MASK 0x0001 /* MICD_STS */
#define WM8958_MICD_STS_SHIFT 0 /* MICD_STS */
#define WM8958_MICD_STS_WIDTH 1 /* MICD_STS */
/*
* R76 (0x4C) - Charge Pump (1)
*/

View File

@ -430,6 +430,7 @@ static int tlv320aic23_set_dai_fmt(struct snd_soc_dai *codec_dai,
iface_reg |= TLV320AIC23_MS_MASTER;
break;
case SND_SOC_DAIFMT_CBS_CFS:
iface_reg &= ~TLV320AIC23_MS_MASTER;
break;
default:
return -EINVAL;

View File

@ -1021,6 +1021,7 @@ static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai,
break;
case SND_SOC_DAIFMT_CBS_CFS:
aic3x->master = 0;
iface_areg &= ~(BIT_CLK_MASTER | WORD_CLK_MASTER);
break;
default:
return -EINVAL;

View File

@ -2361,13 +2361,17 @@ static int wm5100_gpio_direction_out(struct gpio_chip *chip,
{
struct wm5100_priv *wm5100 = gpio_to_wm5100(chip);
struct snd_soc_codec *codec = wm5100->codec;
int val;
int val, ret;
val = (1 << WM5100_GP1_FN_SHIFT) | (!!value << WM5100_GP1_LVL_SHIFT);
return snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
WM5100_GP1_FN_MASK | WM5100_GP1_DIR |
WM5100_GP1_LVL, val);
ret = snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
WM5100_GP1_FN_MASK | WM5100_GP1_DIR |
WM5100_GP1_LVL, val);
if (ret < 0)
return ret;
else
return 0;
}
static int wm5100_gpio_get(struct gpio_chip *chip, unsigned offset)

View File

@ -151,7 +151,7 @@ static int wm8711_hw_params(struct snd_pcm_substream *substream,
{
struct snd_soc_codec *codec = dai->codec;
struct wm8711_priv *wm8711 = snd_soc_codec_get_drvdata(codec);
u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0xfffc;
u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0xfff3;
int i = get_coeff(wm8711->sysclk, params_rate(params));
u16 srate = (coeff_div[i].sr << 2) |
(coeff_div[i].bosr << 1) | coeff_div[i].usb;
@ -232,7 +232,7 @@ static int wm8711_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
u16 iface = 0;
u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0x000c;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {

View File

@ -867,7 +867,7 @@ SOC_ENUM("Right Capture Mode", rin_mode),
SOC_DOUBLE_R("Capture Volume", WM8904_ANALOGUE_LEFT_INPUT_0,
WM8904_ANALOGUE_RIGHT_INPUT_0, 0, 31, 0),
SOC_DOUBLE_R("Capture Switch", WM8904_ANALOGUE_LEFT_INPUT_0,
WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 0),
WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 1),
SOC_SINGLE("High Pass Filter Switch", WM8904_ADC_DIGITAL_0, 4, 1, 0),
SOC_ENUM("High Pass Filter Mode", hpf_mode),

View File

@ -488,6 +488,8 @@ static int wm8940_set_bias_level(struct snd_soc_codec *codec,
break;
}
codec->dapm.bias_level = level;
return ret;
}
@ -619,7 +621,7 @@ static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
switch (div_id) {
case WM8940_BCLKDIV:
reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFEF3;
reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFFE3;
ret = snd_soc_write(codec, WM8940_CLOCK, reg | (div << 2));
break;
case WM8940_MCLKDIV:

View File

@ -1961,7 +1961,13 @@ static int wm8962_readable_register(struct snd_soc_codec *codec, unsigned int re
static int wm8962_reset(struct snd_soc_codec *codec)
{
return snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243);
int ret;
ret = snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243);
if (ret != 0)
return ret;
return snd_soc_write(codec, WM8962_PLL_SOFTWARE_RESET, 0);
}
static const DECLARE_TLV_DB_SCALE(inpga_tlv, -2325, 75, 0);
@ -2360,15 +2366,14 @@ static int sysclk_event(struct snd_soc_dapm_widget *w,
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
WM8962_FLL_ENA, WM8962_FLL_ENA);
if (wm8962->irq) {
timeout = msecs_to_jiffies(5);
timeout = wait_for_completion_timeout(&wm8962->fll_lock,
timeout);
if (timeout == 0)
dev_err(codec->dev,
"Timed out starting FLL\n");
}
timeout = msecs_to_jiffies(5);
timeout = wait_for_completion_timeout(&wm8962->fll_lock,
timeout);
if (wm8962->irq && timeout == 0)
dev_err(codec->dev,
"Timed out starting FLL\n");
}
break;
@ -4049,6 +4054,11 @@ static int wm8962_probe(struct snd_soc_codec *codec)
snd_soc_update_bits(codec, WM8962_CLOCKING2,
WM8962_CLKREG_OVD, WM8962_CLKREG_OVD);
/* Ensure that the oscillator and PLLs are disabled */
snd_soc_update_bits(codec, WM8962_PLL2,
WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA,
0);
regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
if (pdata) {

View File

@ -56,7 +56,7 @@ static int wm8994_retune_mobile_base[] = {
static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
struct wm8994 *control = wm8994->control_data;
struct wm8994 *control = codec->control_data;
switch (reg) {
case WM8994_GPIO_1:
@ -3030,19 +3030,34 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data)
{
struct wm8994_priv *wm8994 = data;
struct snd_soc_codec *codec = wm8994->codec;
int reg;
int reg, count;
reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
if (reg < 0) {
dev_err(codec->dev, "Failed to read mic detect status: %d\n",
reg);
return IRQ_NONE;
}
/* We may occasionally read a detection without an impedence
* range being provided - if that happens loop again.
*/
count = 10;
do {
reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
if (reg < 0) {
dev_err(codec->dev,
"Failed to read mic detect status: %d\n",
reg);
return IRQ_NONE;
}
if (!(reg & WM8958_MICD_VALID)) {
dev_dbg(codec->dev, "Mic detect data not valid\n");
goto out;
}
if (!(reg & WM8958_MICD_VALID)) {
dev_dbg(codec->dev, "Mic detect data not valid\n");
goto out;
}
if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
break;
msleep(1);
} while (count--);
if (count == 0)
dev_warn(codec->dev, "No impedence range reported for jack\n");
#ifndef CONFIG_SND_SOC_WM8994_MODULE
trace_snd_soc_jack_irq(dev_name(codec->dev));
@ -3180,9 +3195,9 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR,
wm8994_fifo_error, "FIFO error", codec);
wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN,
wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN,
wm8994_temp_warn, "Thermal warning", codec);
wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT,
wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT,
wm8994_temp_shut, "Thermal shutdown", codec);
ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE,