renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
Code

net: stmmac: Deprecate snps, phy-addr and auto-detect PHY address

Browse Source 
The snps,phy-addr device tree property is non-standard, and should be
removed in favor of proper phy node support. Remove it from the binding
documents and warn if the property is still used.

Most PHYs respond to address 0, but a few don't, so auto-detect PHY
address by default, to make up for the lack of explicit address selection.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Chen-Yu Tsai 2014-01-17 21:24:45 +08:00 committed by David S. Miller
parent 6aedb8c06d
commit 436f7ecdcc
2 changed files with 8 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/net/stmmac.txt
View File

@ -12,7 +12,6 @@ Required properties:
property
- phy-mode: String, operation mode of the PHY interface.
Supported values are: "mii", "rmii", "gmii", "rgmii".
- snps,phy-addr phy address to connect to.
- snps,reset-gpio gpio number for phy reset.
- snps,reset-active-low boolean flag to indicate if phy reset is active low.
- snps,reset-delays-us is triplet of delays

9
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
View File

@ -50,7 +50,14 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
if (plat->bus_id < 0)
plat->bus_id = 0;
of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr);
/* Default to phy auto-detection */
plat->phy_addr = -1;
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
*/
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
sizeof(struct stmmac_mdio_bus_data),