mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
clk: iproc: Separate status and control variables
Some PLLs have separate registers for Status and Control. The means the pll_base needs to be split into 2 new variables, so that those PLLs can specify device tree registers for those independently. Also, add a new driver flag to identify this presence of the split, and let the driver know that additional registers need to be used. Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This commit is contained in:
parent
f713c6bf32
commit
40c8bec3f2
@ -74,7 +74,8 @@ struct iproc_clk {
|
||||
};
|
||||
|
||||
struct iproc_pll {
|
||||
void __iomem *pll_base;
|
||||
void __iomem *status_base;
|
||||
void __iomem *control_base;
|
||||
void __iomem *pwr_base;
|
||||
void __iomem *asiu_base;
|
||||
|
||||
@ -127,7 +128,7 @@ static int pll_wait_for_lock(struct iproc_pll *pll)
|
||||
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
|
||||
|
||||
for (i = 0; i < LOCK_DELAY; i++) {
|
||||
u32 val = readl(pll->pll_base + ctrl->status.offset);
|
||||
u32 val = readl(pll->status_base + ctrl->status.offset);
|
||||
|
||||
if (val & (1 << ctrl->status.shift))
|
||||
return 0;
|
||||
@ -145,7 +146,7 @@ static void iproc_pll_write(const struct iproc_pll *pll, void __iomem *base,
|
||||
writel(val, base + offset);
|
||||
|
||||
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK &&
|
||||
base == pll->pll_base))
|
||||
(base == pll->status_base || base == pll->control_base)))
|
||||
val = readl(base + offset);
|
||||
}
|
||||
|
||||
@ -161,9 +162,9 @@ static void __pll_disable(struct iproc_pll *pll)
|
||||
}
|
||||
|
||||
if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
|
||||
val = readl(pll->pll_base + ctrl->aon.offset);
|
||||
val = readl(pll->control_base + ctrl->aon.offset);
|
||||
val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->aon.offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
|
||||
}
|
||||
|
||||
if (pll->pwr_base) {
|
||||
@ -184,9 +185,9 @@ static int __pll_enable(struct iproc_pll *pll)
|
||||
u32 val;
|
||||
|
||||
if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
|
||||
val = readl(pll->pll_base + ctrl->aon.offset);
|
||||
val = readl(pll->control_base + ctrl->aon.offset);
|
||||
val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->aon.offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
|
||||
}
|
||||
|
||||
if (pll->pwr_base) {
|
||||
@ -213,9 +214,9 @@ static void __pll_put_in_reset(struct iproc_pll *pll)
|
||||
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
|
||||
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
|
||||
|
||||
val = readl(pll->pll_base + reset->offset);
|
||||
val = readl(pll->control_base + reset->offset);
|
||||
val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift);
|
||||
iproc_pll_write(pll, pll->pll_base, reset->offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, reset->offset, val);
|
||||
}
|
||||
|
||||
static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
|
||||
@ -226,17 +227,17 @@ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
|
||||
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
|
||||
const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
|
||||
|
||||
val = readl(pll->pll_base + dig_filter->offset);
|
||||
val = readl(pll->control_base + dig_filter->offset);
|
||||
val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
|
||||
bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
|
||||
bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
|
||||
val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
|
||||
ka << dig_filter->ka_shift;
|
||||
iproc_pll_write(pll, pll->pll_base, dig_filter->offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, dig_filter->offset, val);
|
||||
|
||||
val = readl(pll->pll_base + reset->offset);
|
||||
val = readl(pll->control_base + reset->offset);
|
||||
val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
|
||||
iproc_pll_write(pll, pll->pll_base, reset->offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, reset->offset, val);
|
||||
}
|
||||
|
||||
static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
|
||||
@ -291,9 +292,9 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
|
||||
/* put PLL in reset */
|
||||
__pll_put_in_reset(pll);
|
||||
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->vco_ctrl.u_offset, 0);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0);
|
||||
|
||||
val = readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
|
||||
val = readl(pll->control_base + ctrl->vco_ctrl.l_offset);
|
||||
|
||||
if (rate >= VCO_LOW && rate < VCO_MID)
|
||||
val |= (1 << PLL_VCO_LOW_SHIFT);
|
||||
@ -303,29 +304,29 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
|
||||
else
|
||||
val |= (1 << PLL_VCO_HIGH_SHIFT);
|
||||
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->vco_ctrl.l_offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.l_offset, val);
|
||||
|
||||
/* program integer part of NDIV */
|
||||
val = readl(pll->pll_base + ctrl->ndiv_int.offset);
|
||||
val = readl(pll->control_base + ctrl->ndiv_int.offset);
|
||||
val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
|
||||
val |= vco->ndiv_int << ctrl->ndiv_int.shift;
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->ndiv_int.offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->ndiv_int.offset, val);
|
||||
|
||||
/* program fractional part of NDIV */
|
||||
if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
|
||||
val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
|
||||
val = readl(pll->control_base + ctrl->ndiv_frac.offset);
|
||||
val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
|
||||
ctrl->ndiv_frac.shift);
|
||||
val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->ndiv_frac.offset,
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->ndiv_frac.offset,
|
||||
val);
|
||||
}
|
||||
|
||||
/* program PDIV */
|
||||
val = readl(pll->pll_base + ctrl->pdiv.offset);
|
||||
val = readl(pll->control_base + ctrl->pdiv.offset);
|
||||
val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
|
||||
val |= vco->pdiv << ctrl->pdiv.shift;
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->pdiv.offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->pdiv.offset, val);
|
||||
|
||||
__pll_bring_out_reset(pll, kp, ka, ki);
|
||||
|
||||
@ -372,7 +373,7 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
|
||||
return 0;
|
||||
|
||||
/* PLL needs to be locked */
|
||||
val = readl(pll->pll_base + ctrl->status.offset);
|
||||
val = readl(pll->status_base + ctrl->status.offset);
|
||||
if ((val & (1 << ctrl->status.shift)) == 0) {
|
||||
clk->rate = 0;
|
||||
return 0;
|
||||
@ -383,13 +384,13 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
|
||||
*
|
||||
* ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv)
|
||||
*/
|
||||
val = readl(pll->pll_base + ctrl->ndiv_int.offset);
|
||||
val = readl(pll->control_base + ctrl->ndiv_int.offset);
|
||||
ndiv_int = (val >> ctrl->ndiv_int.shift) &
|
||||
bit_mask(ctrl->ndiv_int.width);
|
||||
ndiv = (u64)ndiv_int << ctrl->ndiv_int.shift;
|
||||
|
||||
if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
|
||||
val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
|
||||
val = readl(pll->control_base + ctrl->ndiv_frac.offset);
|
||||
ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
|
||||
bit_mask(ctrl->ndiv_frac.width);
|
||||
|
||||
@ -398,7 +399,7 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
|
||||
ndiv_frac;
|
||||
}
|
||||
|
||||
val = readl(pll->pll_base + ctrl->pdiv.offset);
|
||||
val = readl(pll->control_base + ctrl->pdiv.offset);
|
||||
pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
|
||||
|
||||
clk->rate = (ndiv * parent_rate) >> ctrl->ndiv_int.shift;
|
||||
@ -463,14 +464,14 @@ static int iproc_clk_enable(struct clk_hw *hw)
|
||||
u32 val;
|
||||
|
||||
/* channel enable is active low */
|
||||
val = readl(pll->pll_base + ctrl->enable.offset);
|
||||
val = readl(pll->control_base + ctrl->enable.offset);
|
||||
val &= ~(1 << ctrl->enable.enable_shift);
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
|
||||
|
||||
/* also make sure channel is not held */
|
||||
val = readl(pll->pll_base + ctrl->enable.offset);
|
||||
val = readl(pll->control_base + ctrl->enable.offset);
|
||||
val &= ~(1 << ctrl->enable.hold_shift);
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -485,9 +486,9 @@ static void iproc_clk_disable(struct clk_hw *hw)
|
||||
if (ctrl->flags & IPROC_CLK_AON)
|
||||
return;
|
||||
|
||||
val = readl(pll->pll_base + ctrl->enable.offset);
|
||||
val = readl(pll->control_base + ctrl->enable.offset);
|
||||
val |= 1 << ctrl->enable.enable_shift;
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
|
||||
}
|
||||
|
||||
static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
|
||||
@ -502,7 +503,7 @@ static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
|
||||
if (parent_rate == 0)
|
||||
return 0;
|
||||
|
||||
val = readl(pll->pll_base + ctrl->mdiv.offset);
|
||||
val = readl(pll->control_base + ctrl->mdiv.offset);
|
||||
mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width);
|
||||
if (mdiv == 0)
|
||||
mdiv = 256;
|
||||
@ -549,14 +550,14 @@ static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
|
||||
if (div > 256)
|
||||
return -EINVAL;
|
||||
|
||||
val = readl(pll->pll_base + ctrl->mdiv.offset);
|
||||
val = readl(pll->control_base + ctrl->mdiv.offset);
|
||||
if (div == 256) {
|
||||
val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
|
||||
} else {
|
||||
val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
|
||||
val |= div << ctrl->mdiv.shift;
|
||||
}
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->mdiv.offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val);
|
||||
clk->rate = parent_rate / div;
|
||||
|
||||
return 0;
|
||||
@ -581,9 +582,10 @@ static void iproc_pll_sw_cfg(struct iproc_pll *pll)
|
||||
if (ctrl->flags & IPROC_CLK_PLL_NEEDS_SW_CFG) {
|
||||
u32 val;
|
||||
|
||||
val = readl(pll->pll_base + ctrl->sw_ctrl.offset);
|
||||
val = readl(pll->control_base + ctrl->sw_ctrl.offset);
|
||||
val |= BIT(ctrl->sw_ctrl.shift);
|
||||
iproc_pll_write(pll, pll->pll_base, ctrl->sw_ctrl.offset, val);
|
||||
iproc_pll_write(pll, pll->control_base, ctrl->sw_ctrl.offset,
|
||||
val);
|
||||
}
|
||||
}
|
||||
|
||||
@ -618,8 +620,8 @@ void __init iproc_pll_clk_setup(struct device_node *node,
|
||||
if (WARN_ON(!pll->clks))
|
||||
goto err_clks;
|
||||
|
||||
pll->pll_base = of_iomap(node, 0);
|
||||
if (WARN_ON(!pll->pll_base))
|
||||
pll->control_base = of_iomap(node, 0);
|
||||
if (WARN_ON(!pll->control_base))
|
||||
goto err_pll_iomap;
|
||||
|
||||
/* Some SoCs do not require the pwr_base, thus failing is not fatal */
|
||||
@ -632,6 +634,16 @@ void __init iproc_pll_clk_setup(struct device_node *node,
|
||||
goto err_asiu_iomap;
|
||||
}
|
||||
|
||||
if (pll_ctrl->flags & IPROC_CLK_PLL_SPLIT_STAT_CTRL) {
|
||||
/* Some SoCs have a split status/control. If this does not
|
||||
* exist, assume they are unified.
|
||||
*/
|
||||
pll->status_base = of_iomap(node, 2);
|
||||
if (!pll->status_base)
|
||||
goto err_status_iomap;
|
||||
} else
|
||||
pll->status_base = pll->control_base;
|
||||
|
||||
/* initialize and register the PLL itself */
|
||||
pll->ctrl = pll_ctrl;
|
||||
|
||||
@ -702,6 +714,10 @@ err_clk_register:
|
||||
clk_unregister(pll->clk_data.clks[i]);
|
||||
|
||||
err_pll_register:
|
||||
if (pll->status_base != pll->control_base)
|
||||
iounmap(pll->status_base);
|
||||
|
||||
err_status_iomap:
|
||||
if (pll->asiu_base)
|
||||
iounmap(pll->asiu_base);
|
||||
|
||||
@ -709,7 +725,7 @@ err_asiu_iomap:
|
||||
if (pll->pwr_base)
|
||||
iounmap(pll->pwr_base);
|
||||
|
||||
iounmap(pll->pll_base);
|
||||
iounmap(pll->control_base);
|
||||
|
||||
err_pll_iomap:
|
||||
kfree(pll->clks);
|
||||
|
@ -54,6 +54,12 @@
|
||||
*/
|
||||
#define IPROC_CLK_EMBED_PWRCTRL BIT(5)
|
||||
|
||||
/*
|
||||
* Some PLLs have separate registers for Status and Control. Identify this to
|
||||
* let the driver know if additional registers need to be used
|
||||
*/
|
||||
#define IPROC_CLK_PLL_SPLIT_STAT_CTRL BIT(6)
|
||||
|
||||
/*
|
||||
* Parameters for VCO frequency configuration
|
||||
*
|
||||
|
Loading…
Reference in New Issue
Block a user