mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 11:44:01 +08:00
powerpc/85xx: Add p2040 RDB board support
P2040RDB Specification: ----------------------- 2Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus) 128 Mbyte NOR flash single-chip memory 256 Kbit M24256 I2C EEPROM 16 Mbyte SPI memory SD connector to interface with the SD memory card dTSEC1: connected to the Vitesse SGMII PHY (VSC8221) dTSEC2: connected to the Vitesse SGMII PHY (VSC8221) dTSEC3: connected to the Vitesse SGMII PHY (VSC8221) dTSEC4: connected to the Vitesse RGMII PHY (VSC8641) dTSEC5: connected to the Vitesse RGMII PHY (VSC8641) I2C1: Real time clock, Temperature sensor I2C2: Vcore Regulator, 256Kbit I2C Bus EEPROM SATA: Lanes C and Land D of Bank2 are connected to two SATA connectors UART: supports two UARTs up to 115200 bps for console USB 2.0: connected via a internal UTMI PHY to two TYPE-A interfaces PCIe: - Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT1 - Lanes C and Land D of Bank2 are connected to one x4 PCIe SLOT2 Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Mingkai Hu
Kumar Gala
parent
59f8df290a
commit
3fce1c0ba2
166
arch/powerpc/boot/dts/p2040rdb.dts
Normal file
166
arch/powerpc/boot/dts/p2040rdb.dts
Normal file
@ -0,0 +1,166 @@
|
||||
/*
|
||||
* P2040RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/include/ "p2040si.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,P2040RDB";
|
||||
compatible = "fsl,P2040RDB";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
soc: soc@ffe000000 {
|
||||
spi@110000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spansion,s25sl12801";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>; /* input clock */
|
||||
partition@u-boot {
|
||||
label = "u-boot";
|
||||
reg = <0x00000000 0x00100000>;
|
||||
read-only;
|
||||
};
|
||||
partition@kernel {
|
||||
label = "kernel";
|
||||
reg = <0x00100000 0x00500000>;
|
||||
read-only;
|
||||
};
|
||||
partition@dtb {
|
||||
label = "dtb";
|
||||
reg = <0x00600000 0x00100000>;
|
||||
read-only;
|
||||
};
|
||||
partition@fs {
|
||||
label = "file system";
|
||||
reg = <0x00700000 0x00900000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c@118000 {
|
||||
lm75b@48 {
|
||||
compatible = "nxp,lm75a";
|
||||
reg = <0x48>;
|
||||
};
|
||||
eeprom@50 {
|
||||
compatible = "at24,24c256";
|
||||
reg = <0x50>;
|
||||
};
|
||||
rtc@68 {
|
||||
compatible = "pericom,pt7c4338";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@118100 {
|
||||
eeprom@50 {
|
||||
compatible = "at24,24c256";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
usb0: usb@210000 {
|
||||
phy_type = "utmi";
|
||||
};
|
||||
|
||||
usb1: usb@211000 {
|
||||
dr_mode = "host";
|
||||
phy_type = "utmi";
|
||||
};
|
||||
};
|
||||
|
||||
localbus@ffe124000 {
|
||||
reg = <0xf 0xfe124000 0 0x1000>;
|
||||
ranges = <0 0 0xf 0xe8000000 0x08000000>;
|
||||
|
||||
flash@0,0 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0 0x08000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe200000 {
|
||||
reg = <0xf 0xfe200000 0 0x1000>;
|
||||
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
|
||||
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x20000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe201000 {
|
||||
reg = <0xf 0xfe201000 0 0x1000>;
|
||||
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
|
||||
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x20000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci2: pcie@ffe202000 {
|
||||
reg = <0xf 0xfe202000 0 0x1000>;
|
||||
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
|
||||
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x20000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
623
arch/powerpc/boot/dts/p2040si.dtsi
Normal file
623
arch/powerpc/boot/dts/p2040si.dtsi
Normal file
@ -0,0 +1,623 @@
|
||||
/*
|
||||
* P2040 Silicon Device Tree Source
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P2040";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ccsr = &soc;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
dma0 = &dma0;
|
||||
dma1 = &dma1;
|
||||
sdhc = &sdhc;
|
||||
msi0 = &msi0;
|
||||
msi1 = &msi1;
|
||||
msi2 = &msi2;
|
||||
|
||||
crypto = &crypto;
|
||||
sec_jr0 = &sec_jr0;
|
||||
sec_jr1 = &sec_jr1;
|
||||
sec_jr2 = &sec_jr2;
|
||||
sec_jr3 = &sec_jr3;
|
||||
rtic_a = &rtic_a;
|
||||
rtic_b = &rtic_b;
|
||||
rtic_c = &rtic_c;
|
||||
rtic_d = &rtic_d;
|
||||
sec_mon = &sec_mon;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: PowerPC,e500mc@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu1: PowerPC,e500mc@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu2: PowerPC,e500mc@2 {
|
||||
device_type = "cpu";
|
||||
reg = <2>;
|
||||
next-level-cache = <&L2_2>;
|
||||
L2_2: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu3: PowerPC,e500mc@3 {
|
||||
device_type = "cpu";
|
||||
reg = <3>;
|
||||
next-level-cache = <&L2_3>;
|
||||
L2_3: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc@ffe000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
|
||||
reg = <0xf 0xfe000000 0 0x00001000>;
|
||||
|
||||
soc-sram-error {
|
||||
compatible = "fsl,soc-sram-error";
|
||||
interrupts = <16 2 1 29>;
|
||||
};
|
||||
|
||||
corenet-law@0 {
|
||||
compatible = "fsl,corenet-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <32>;
|
||||
};
|
||||
|
||||
memory-controller@8000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <16 2 1 23>;
|
||||
};
|
||||
|
||||
cpc: l3-cache-controller@10000 {
|
||||
compatible = "fsl,p2040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
|
||||
reg = <0x10000 0x1000>;
|
||||
interrupts = <16 2 1 27>;
|
||||
};
|
||||
|
||||
corenet-cf@18000 {
|
||||
compatible = "fsl,corenet-cf";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <16 2 1 31>;
|
||||
fsl,ccf-num-csdids = <32>;
|
||||
fsl,ccf-num-snoopids = <32>;
|
||||
};
|
||||
|
||||
iommu@20000 {
|
||||
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
||||
reg = <0x20000 0x4000>;
|
||||
interrupts = <
|
||||
24 2 0 0
|
||||
16 2 1 30>;
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
clock-frequency = <0>;
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <4>;
|
||||
reg = <0x40000 0x40000>;
|
||||
compatible = "fsl,mpic", "chrp,open-pic";
|
||||
device_type = "open-pic";
|
||||
};
|
||||
|
||||
msi0: msi@41600 {
|
||||
compatible = "fsl,mpic-msi";
|
||||
reg = <0x41600 0x200>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe0 0 0 0
|
||||
0xe1 0 0 0
|
||||
0xe2 0 0 0
|
||||
0xe3 0 0 0
|
||||
0xe4 0 0 0
|
||||
0xe5 0 0 0
|
||||
0xe6 0 0 0
|
||||
0xe7 0 0 0>;
|
||||
};
|
||||
|
||||
msi1: msi@41800 {
|
||||
compatible = "fsl,mpic-msi";
|
||||
reg = <0x41800 0x200>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe8 0 0 0
|
||||
0xe9 0 0 0
|
||||
0xea 0 0 0
|
||||
0xeb 0 0 0
|
||||
0xec 0 0 0
|
||||
0xed 0 0 0
|
||||
0xee 0 0 0
|
||||
0xef 0 0 0>;
|
||||
};
|
||||
|
||||
msi2: msi@41a00 {
|
||||
compatible = "fsl,mpic-msi";
|
||||
reg = <0x41a00 0x200>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xf0 0 0 0
|
||||
0xf1 0 0 0
|
||||
0xf2 0 0 0
|
||||
0xf3 0 0 0
|
||||
0xf4 0 0 0
|
||||
0xf5 0 0 0
|
||||
0xf6 0 0 0
|
||||
0xf7 0 0 0>;
|
||||
};
|
||||
|
||||
guts: global-utilities@e0000 {
|
||||
compatible = "fsl,qoriq-device-config-1.0";
|
||||
reg = <0xe0000 0xe00>;
|
||||
fsl,has-rstcr;
|
||||
#sleep-cells = <1>;
|
||||
fsl,liodn-bits = <12>;
|
||||
};
|
||||
|
||||
pins: global-utilities@e0e00 {
|
||||
compatible = "fsl,qoriq-pin-control-1.0";
|
||||
reg = <0xe0e00 0x200>;
|
||||
#sleep-cells = <2>;
|
||||
};
|
||||
|
||||
clockgen: global-utilities@e1000 {
|
||||
compatible = "fsl,p2040-clockgen", "fsl,qoriq-clockgen-1.0";
|
||||
reg = <0xe1000 0x1000>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
rcpm: global-utilities@e2000 {
|
||||
compatible = "fsl,qoriq-rcpm-1.0";
|
||||
reg = <0xe2000 0x1000>;
|
||||
#sleep-cells = <1>;
|
||||
};
|
||||
|
||||
sfp: sfp@e8000 {
|
||||
compatible = "fsl,p2040-sfp", "fsl,qoriq-sfp-1.0";
|
||||
reg = <0xe8000 0x1000>;
|
||||
};
|
||||
|
||||
serdes: serdes@ea000 {
|
||||
compatible = "fsl,p2040-serdes";
|
||||
reg = <0xea000 0x1000>;
|
||||
};
|
||||
|
||||
dma0: dma@100300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
|
||||
reg = <0x100300 0x4>;
|
||||
ranges = <0x0 0x100100 0x200>;
|
||||
cell-index = <0>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,p2040-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupts = <28 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,p2040-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupts = <29 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,p2040-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupts = <30 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,p2040-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupts = <31 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
dma1: dma@101300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
|
||||
reg = <0x101300 0x4>;
|
||||
ranges = <0x0 0x101100 0x200>;
|
||||
cell-index = <1>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,p2040-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupts = <32 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,p2040-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupts = <33 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,p2040-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupts = <34 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,p2040-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupts = <35 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
spi@110000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,p2040-espi", "fsl,mpc8536-espi";
|
||||
reg = <0x110000 0x1000>;
|
||||
interrupts = <53 0x2 0 0>;
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
|
||||
};
|
||||
|
||||
sdhc: sdhc@114000 {
|
||||
compatible = "fsl,p2040-esdhc", "fsl,esdhc";
|
||||
reg = <0x114000 0x1000>;
|
||||
interrupts = <48 2 0 0>;
|
||||
sdhci,auto-cmd12;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
|
||||
i2c@118000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x118000 0x100>;
|
||||
interrupts = <38 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@118100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x118100 0x100>;
|
||||
interrupts = <38 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@119000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <2>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x119000 0x100>;
|
||||
interrupts = <39 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@119100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <3>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x119100 0x100>;
|
||||
interrupts = <39 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
serial0: serial@11c500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x11c500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <36 2 0 0>;
|
||||
};
|
||||
|
||||
serial1: serial@11c600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x11c600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <36 2 0 0>;
|
||||
};
|
||||
|
||||
serial2: serial@11d500 {
|
||||
cell-index = <2>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x11d500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <37 2 0 0>;
|
||||
};
|
||||
|
||||
serial3: serial@11d600 {
|
||||
cell-index = <3>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x11d600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <37 2 0 0>;
|
||||
};
|
||||
|
||||
gpio0: gpio@130000 {
|
||||
compatible = "fsl,p2040-gpio", "fsl,qoriq-gpio";
|
||||
reg = <0x130000 0x1000>;
|
||||
interrupts = <55 2 0 0>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
usb0: usb@210000 {
|
||||
compatible = "fsl,p2040-usb2-mph",
|
||||
"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
|
||||
reg = <0x210000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <44 0x2 0 0>;
|
||||
port0;
|
||||
};
|
||||
|
||||
usb1: usb@211000 {
|
||||
compatible = "fsl,p2040-usb2-dr",
|
||||
"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
|
||||
reg = <0x211000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <45 0x2 0 0>;
|
||||
};
|
||||
|
||||
sata@220000 {
|
||||
compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
|
||||
reg = <0x220000 0x1000>;
|
||||
interrupts = <68 0x2 0 0>;
|
||||
};
|
||||
|
||||
sata@221000 {
|
||||
compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
|
||||
reg = <0x221000 0x1000>;
|
||||
interrupts = <69 0x2 0 0>;
|
||||
};
|
||||
|
||||
crypto: crypto@300000 {
|
||||
compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x300000 0x10000>;
|
||||
ranges = <0 0x300000 0x10000>;
|
||||
interrupts = <92 2 0 0>;
|
||||
|
||||
sec_jr0: jr@1000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <88 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr1: jr@2000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <89 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr2: jr@3000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x3000 0x1000>;
|
||||
interrupts = <90 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr3: jr@4000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x4000 0x1000>;
|
||||
interrupts = <91 2 0 0>;
|
||||
};
|
||||
|
||||
rtic@6000 {
|
||||
compatible = "fsl,sec-v4.2-rtic",
|
||||
"fsl,sec-v4.0-rtic";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x6000 0x100>;
|
||||
ranges = <0x0 0x6100 0xe00>;
|
||||
|
||||
rtic_a: rtic-a@0 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x00 0x20 0x100 0x80>;
|
||||
};
|
||||
|
||||
rtic_b: rtic-b@20 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x20 0x20 0x200 0x80>;
|
||||
};
|
||||
|
||||
rtic_c: rtic-c@40 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x40 0x20 0x300 0x80>;
|
||||
};
|
||||
|
||||
rtic_d: rtic-d@60 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x60 0x20 0x500 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sec_mon: sec_mon@314000 {
|
||||
compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
|
||||
reg = <0x314000 0x1000>;
|
||||
interrupts = <93 2 0 0>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
localbus@ffe124000 {
|
||||
compatible = "fsl,p2040-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <25 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
pci0: pcie@ffe200000 {
|
||||
compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <0x1fca055>;
|
||||
fsl,msi = <&msi0>;
|
||||
interrupts = <16 2 1 15>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 15>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 40 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe201000 {
|
||||
compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
clock-frequency = <0x1fca055>;
|
||||
fsl,msi = <&msi1>;
|
||||
interrupts = <16 2 1 14>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 14>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 41 1 0 0
|
||||
0000 0 0 2 &mpic 5 1 0 0
|
||||
0000 0 0 3 &mpic 6 1 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
pci2: pcie@ffe202000 {
|
||||
compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <0x1fca055>;
|
||||
fsl,msi = <&msi2>;
|
||||
interrupts = <16 2 1 13>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 13>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 42 1 0 0
|
||||
0000 0 0 2 &mpic 9 1 0 0
|
||||
0000 0 0 3 &mpic 10 1 0 0
|
||||
0000 0 0 4 &mpic 11 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -23,6 +23,7 @@ CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_P2040_RDB=y
|
||||
CONFIG_P3041_DS=y
|
||||
CONFIG_P4080_DS=y
|
||||
CONFIG_P5020_DS=y
|
||||
|
||||
@ -171,6 +171,18 @@ config SBC8560
|
||||
help
|
||||
This option enables support for the Wind River SBC8560 board
|
||||
|
||||
config P2040_RDB
|
||||
bool "Freescale P2040 RDB"
|
||||
select DEFAULT_UIMAGE
|
||||
select PPC_E500MC
|
||||
select PHYS_64BIT
|
||||
select SWIOTLB
|
||||
select MPC8xxx_GPIO
|
||||
select HAS_RAPIDIO
|
||||
select PPC_EPAPR_HV_PIC
|
||||
help
|
||||
This option enables support for the P2040 RDB board
|
||||
|
||||
config P3041_DS
|
||||
bool "Freescale P3041 DS"
|
||||
select DEFAULT_UIMAGE
|
||||
|
||||
@ -13,6 +13,7 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
|
||||
obj-$(CONFIG_P1010_RDB) += p1010rdb.o
|
||||
obj-$(CONFIG_P1022_DS) += p1022_ds.o
|
||||
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
|
||||
obj-$(CONFIG_P2040_RDB) += p2040_rdb.o corenet_ds.o
|
||||
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
|
||||
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
|
||||
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
|
||||
|
||||
88
arch/powerpc/platforms/85xx/p2040_rdb.c
Normal file
88
arch/powerpc/platforms/85xx/p2040_rdb.c
Normal file
@ -0,0 +1,88 @@
|
||||
/*
|
||||
* P2040 RDB Setup
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/kdev_t.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/phy.h>
|
||||
|
||||
#include <asm/system.h>
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/pci-bridge.h>
|
||||
#include <mm/mmu_decl.h>
|
||||
#include <asm/prom.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/mpic.h>
|
||||
|
||||
#include <linux/of_platform.h>
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
#include <asm/ehv_pic.h>
|
||||
|
||||
#include "corenet_ds.h"
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init p2040_rdb_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
#ifdef CONFIG_SMP
|
||||
extern struct smp_ops_t smp_85xx_ops;
|
||||
#endif
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "fsl,P2040RDB"))
|
||||
return 1;
|
||||
|
||||
/* Check if we're running under the Freescale hypervisor */
|
||||
if (of_flat_dt_is_compatible(root, "fsl,P2040RDB-hv")) {
|
||||
ppc_md.init_IRQ = ehv_pic_init;
|
||||
ppc_md.get_irq = ehv_pic_get_irq;
|
||||
ppc_md.restart = fsl_hv_restart;
|
||||
ppc_md.power_off = fsl_hv_halt;
|
||||
ppc_md.halt = fsl_hv_halt;
|
||||
#ifdef CONFIG_SMP
|
||||
/*
|
||||
* Disable the timebase sync operations because we can't write
|
||||
* to the timebase registers under the hypervisor.
|
||||
*/
|
||||
smp_85xx_ops.give_timebase = NULL;
|
||||
smp_85xx_ops.take_timebase = NULL;
|
||||
#endif
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
define_machine(p2040_rdb) {
|
||||
.name = "P2040 RDB",
|
||||
.probe = p2040_rdb_probe,
|
||||
.setup_arch = corenet_ds_setup_arch,
|
||||
.init_IRQ = corenet_ds_pic_init,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
#endif
|
||||
.get_irq = mpic_get_coreint_irq,
|
||||
.restart = fsl_rstcr_restart,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
.power_save = e500_idle,
|
||||
};
|
||||
|
||||
machine_device_initcall(p2040_rdb, corenet_ds_publish_devices);
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
machine_arch_initcall(p2040_rdb, swiotlb_setup_bus_notifier);
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user