2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 02:34:01 +08:00

ARM: dts: AM33XX: Add default pinctrl binding for I2C device

Add pin control binding for I2C device nodes in all
board specific DT files (as per current usage),

EVM: Both i2c0 and i2c1
EVM-SK and Bone: Only i2c0

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Matt Porter <mporter@ti.com>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
This commit is contained in:
Vaibhav Hiremath 2013-03-26 14:14:01 +05:30 committed by Benoit Cousson
parent 3ab65f2bca
commit 3f8664457c
3 changed files with 40 additions and 0 deletions

View File

@ -36,6 +36,13 @@
0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
0x188 0x30 /* i2c0_sda.i2c0_sda PULLUP | INPUTENABLE | MODE0 */
0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */
>;
};
};
ocp {
@ -44,6 +51,9 @@
};
i2c0: i2c@44e0b000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <400000>;

View File

@ -44,6 +44,20 @@
0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
0x188 0x30 /* i2c0_sda.i2c0_sda PULLUP | INPUTENABLE | MODE0 */
0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x158 0x32 /* spi0_d1.i2c1_sda PULLUP | INPUTENABLE | MODE2 */
0x15c 0x32 /* spi0_cs0.i2c1_scl PULLUP | INPUTENABLE | MODE2 */
>;
};
};
ocp {
@ -52,6 +66,9 @@
};
i2c0: i2c@44e0b000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <400000>;
@ -61,6 +78,9 @@
};
i2c1: i2c@4802a000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
clock-frequency = <100000>;

View File

@ -51,6 +51,13 @@
0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
0x188 0x30 /* i2c0_sda.i2c0_sda PULLUP | INPUTENABLE | MODE0 */
0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */
>;
};
};
ocp {
@ -59,6 +66,9 @@
};
i2c0: i2c@44e0b000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <400000>;