2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00

clk: ti: amx3xx: limit the maximum frequency of DPLLs based on spec

AM33xx/AM43xx devices use the same DPLL IP blocks, which only support
maximum rate of 1GHz [1] for the default and 2GHz for the low-jitter type
DPLLs [2]. Reflect this limitation in the DPLL init code by adding the
max-rate parameter based on the DPLL types.

[1] Functional, integration & test specification for GS70 ADPLLS, Rev 1.0-01
[2] Functional, integration & test specification for GS70 ADPLLLJ, Rev 0.8-02

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This commit is contained in:
Tero Kristo 2016-03-16 21:54:56 +02:00 committed by Stephen Boyd
parent c5cc2a0bc9
commit 3db5ca27c8

View File

@ -655,6 +655,7 @@ static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node)
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.max_rate = 1000000000,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
@ -674,6 +675,7 @@ static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node)
.max_divider = 256,
.min_divider = 2,
.flags = DPLL_J_TYPE,
.max_rate = 2000000000,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
@ -692,6 +694,7 @@ static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node)
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.max_rate = 2000000000,
.flags = DPLL_J_TYPE,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
@ -712,6 +715,7 @@ static void __init of_ti_am3_dpll_setup(struct device_node *node)
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.max_rate = 1000000000,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
@ -729,6 +733,7 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node)
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.max_rate = 1000000000,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};