2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 16:53:54 +08:00

Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull third set of powerpc updates from Benjamin Herrenschmidt:
 "This is a small collection of random bug fixes and a few improvements
  of Oops output which I deemed valuable enough to include as well.

  The fixes are essentially recent build breakage and regressions, and a
  couple of older bugs such as the DTL log duplication, the EEH issue
  with PCI_COMMAND_MASTER and the problem with small contexts passed to
  get/set_context with VSX enabled"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/signals: Mark VSX not saved with small contexts
  powerpc/pseries: Fix SMP=n build of rng.c
  powerpc: Make cpu_to_chip_id() available when SMP=n
  powerpc/vio: Fix a dma_mask issue of vio
  powerpc: booke: Fix build failures
  powerpc: ppc64 address space capped at 32TB, mmap randomisation disabled
  powerpc: Only print PACATMSCRATCH in oops when TM is active
  powerpc/pseries: Duplicate dtl entries sometimes sent to userspace
  powerpc: Remove a few lines of oops output
  powerpc: Print DAR and DSISR on machine check oopses
  powerpc: Fix __get_user_pages_fast() irq handling
  powerpc/eeh: More accurate log
  powerpc/eeh: Enable PCI_COMMAND_MASTER for PCI bridges
This commit is contained in:
Linus Torvalds 2013-11-22 08:07:11 -08:00
commit 3bab0bf045
20 changed files with 75 additions and 36 deletions

View File

@ -33,6 +33,7 @@ extern int boot_cpuid;
extern int spinning_secondaries;
extern void cpu_die(void);
extern int cpu_to_chip_id(int cpu);
#ifdef CONFIG_SMP
@ -112,7 +113,6 @@ static inline struct cpumask *cpu_core_mask(int cpu)
}
extern int cpu_to_core_id(int cpu);
extern int cpu_to_chip_id(int cpu);
/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
*

View File

@ -686,6 +686,15 @@ void eeh_save_bars(struct eeh_dev *edev)
for (i = 0; i < 16; i++)
eeh_ops->read_config(dn, i * 4, 4, &edev->config_space[i]);
/*
* For PCI bridges including root port, we need enable bus
* master explicitly. Otherwise, it can't fetch IODA table
* entries correctly. So we cache the bit in advance so that
* we can restore it after reset, either PHB range or PE range.
*/
if (edev->mode & EEH_DEV_BRIDGE)
edev->config_space[1] |= PCI_COMMAND_MASTER;
}
/**

View File

@ -74,8 +74,13 @@ static int eeh_event_handler(void * dummy)
pe = event->pe;
if (pe) {
eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
pr_info("EEH: Detected PCI bus error on PHB#%d-PE#%x\n",
pe->phb->global_number, pe->addr);
if (pe->type & EEH_PE_PHB)
pr_info("EEH: Detected error on PHB#%d\n",
pe->phb->global_number);
else
pr_info("EEH: Detected PCI bus error on "
"PHB#%d-PE#%x\n",
pe->phb->global_number, pe->addr);
eeh_handle_event(pe);
eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
} else {

View File

@ -858,17 +858,21 @@ void show_regs(struct pt_regs * regs)
printk("MSR: "REG" ", regs->msr);
printbits(regs->msr, msr_bits);
printk(" CR: %08lx XER: %08lx\n", regs->ccr, regs->xer);
#ifdef CONFIG_PPC64
printk("SOFTE: %ld\n", regs->softe);
#endif
trap = TRAP(regs);
if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
printk("CFAR: "REG"\n", regs->orig_gpr3);
if (trap == 0x300 || trap == 0x600)
printk("CFAR: "REG" ", regs->orig_gpr3);
if (trap == 0x200 || trap == 0x300 || trap == 0x600)
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
printk("DEAR: "REG" ESR: "REG" ", regs->dar, regs->dsisr);
#else
printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr);
printk("DAR: "REG" DSISR: %08lx ", regs->dar, regs->dsisr);
#endif
#ifdef CONFIG_PPC64
printk("SOFTE: %ld ", regs->softe);
#endif
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
if (MSR_TM_ACTIVE(regs->msr))
printk("\nPACATMSCRATCH: %016llx ", get_paca()->tm_scratch);
#endif
for (i = 0; i < 32; i++) {
@ -886,9 +890,6 @@ void show_regs(struct pt_regs * regs)
*/
printk("NIP ["REG"] %pS\n", regs->nip, (void *)regs->nip);
printk("LR ["REG"] %pS\n", regs->link, (void *)regs->link);
#endif
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
printk("PACATMSCRATCH [%llx]\n", get_paca()->tm_scratch);
#endif
show_stack(current, (unsigned long *) regs->gpr[1]);
if (!user_mode(regs))

View File

@ -777,6 +777,26 @@ int of_get_ibm_chip_id(struct device_node *np)
return -1;
}
/**
* cpu_to_chip_id - Return the cpus chip-id
* @cpu: The logical cpu number.
*
* Return the value of the ibm,chip-id property corresponding to the given
* logical cpu number. If the chip-id can not be found, returns -1.
*/
int cpu_to_chip_id(int cpu)
{
struct device_node *np;
np = of_get_cpu_node(cpu, NULL);
if (!np)
return -1;
of_node_put(np);
return of_get_ibm_chip_id(np);
}
EXPORT_SYMBOL(cpu_to_chip_id);
#ifdef CONFIG_PPC_PSERIES
/*
* Fix up the uninitialized fields in a new device node:

View File

@ -457,7 +457,15 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
if (copy_vsx_to_user(&frame->mc_vsregs, current))
return 1;
msr |= MSR_VSX;
}
} else if (!ctx_has_vsx_region)
/*
* With a small context structure we can't hold the VSX
* registers, hence clear the MSR value to indicate the state
* was not saved.
*/
msr &= ~MSR_VSX;
#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
/* save spe registers */

View File

@ -597,22 +597,6 @@ out:
return id;
}
/* Return the value of the chip-id property corresponding
* to the given logical cpu.
*/
int cpu_to_chip_id(int cpu)
{
struct device_node *np;
np = of_get_cpu_node(cpu, NULL);
if (!np)
return -1;
of_node_put(np);
return of_get_ibm_chip_id(np);
}
EXPORT_SYMBOL(cpu_to_chip_id);
/* Helper routines for cpu to core mapping */
int cpu_core_index_of_thread(int cpu)
{

View File

@ -213,8 +213,6 @@ static u64 scan_dispatch_log(u64 stop_tb)
if (i == be64_to_cpu(vpa->dtl_idx))
return 0;
while (i < be64_to_cpu(vpa->dtl_idx)) {
if (dtl_consumer)
dtl_consumer(dtl, i);
dtb = be64_to_cpu(dtl->timebase);
tb_delta = be32_to_cpu(dtl->enqueue_to_dispatch_time) +
be32_to_cpu(dtl->ready_to_enqueue_time);
@ -227,6 +225,8 @@ static u64 scan_dispatch_log(u64 stop_tb)
}
if (dtb > stop_tb)
break;
if (dtl_consumer)
dtl_consumer(dtl, i);
stolen += tb_delta;
++i;
++dtl;

View File

@ -1419,7 +1419,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
/* needed to ensure proper operation of coherent allocations
* later, in case driver doesn't set it explicitly */
dma_set_mask_and_coherent(&viodev->dev, DMA_BIT_MASK(64));
dma_coerce_mask_and_coherent(&viodev->dev, DMA_BIT_MASK(64));
}
/* register with generic device framework */

View File

@ -123,6 +123,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
struct mm_struct *mm = current->mm;
unsigned long addr, len, end;
unsigned long next;
unsigned long flags;
pgd_t *pgdp;
int nr = 0;
@ -156,7 +157,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
* So long as we atomically load page table pointers versus teardown,
* we can follow the address down to the the page and take a ref on it.
*/
local_irq_disable();
local_irq_save(flags);
pgdp = pgd_offset(mm, addr);
do {
@ -179,7 +180,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
break;
} while (pgdp++, addr = next, addr != end);
local_irq_enable();
local_irq_restore(flags);
return nr;
}

View File

@ -258,7 +258,7 @@ static bool slice_scan_available(unsigned long addr,
slice = GET_HIGH_SLICE_INDEX(addr);
*boundary_addr = (slice + end) ?
((slice + end) << SLICE_HIGH_SHIFT) : SLICE_LOW_TOP;
return !!(available.high_slices & (1u << slice));
return !!(available.high_slices & (1ul << slice));
}
}

View File

@ -19,6 +19,7 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/smp.h>
struct powernv_rng {

View File

@ -13,6 +13,7 @@
#include <linux/of.h>
#include <asm/archrandom.h>
#include <asm/machdep.h>
#include <asm/plpar_wrappers.h>
static int pseries_get_random_long(unsigned long *v)

View File

@ -15,6 +15,7 @@
#include <linux/of.h>
#include <linux/smp.h>
#include <linux/time.h>
#include <linux/of_fdt.h>
#include <asm/machdep.h>
#include <asm/udbg.h>

View File

@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include "wsp.h"

View File

@ -18,6 +18,8 @@
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/io.h>
#include <asm/irq.h>

View File

@ -15,6 +15,8 @@
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/reg_a2.h>
#include <asm/irq.h>

View File

@ -15,6 +15,7 @@
#include <linux/of.h>
#include <linux/smp.h>
#include <linux/time.h>
#include <linux/of_fdt.h>
#include <asm/machdep.h>
#include <asm/udbg.h>

View File

@ -14,6 +14,7 @@
#include <linux/of.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/of_address.h>
#include <asm/cputhreads.h>
#include <asm/reg_a2.h>

View File

@ -13,6 +13,7 @@
#include <linux/smp.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <linux/of_address.h>
#include <asm/scom.h>