mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
ARM: dts: am335x: Add support for Bosch Guardian
The Bosch Guardian is a TI am335x based device. It's hardware specifications are as follows: * 256 MB DDR3 memory * 512 MB NAND Flash * USB OTG * RS232 * MicroSD external storage * LCD Display interface Signed-off-by: Martyn Welch <martyn.welch@collabora.com> [tony@atomide.com: updated to use #include] Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Martyn Welch
Tony Lindgren
parent
1f4f84e955
commit
361df77976
@ -719,6 +719,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
|
||||
am335x-cm-t335.dtb \
|
||||
am335x-evm.dtb \
|
||||
am335x-evmsk.dtb \
|
||||
am335x-guardian.dtb \
|
||||
am335x-icev2.dtb \
|
||||
am335x-lxm.dtb \
|
||||
am335x-moxa-uc-2101.dtb \
|
||||
|
||||
511
arch/arm/boot/dts/am335x-guardian.dts
Normal file
511
arch/arm/boot/dts/am335x-guardian.dts
Normal file
@ -0,0 +1,511 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||
* Copyright (C) 2018 Robert Bosch Power Tools GmbH
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
model = "Bosch AM335x Guardian";
|
||||
compatible = "bosch,am335x-guardian", "ti,am33xx";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
tick-timer = &timer2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&dcdc2_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_keys_pins>;
|
||||
|
||||
button21 {
|
||||
label = "guardian-power-button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio2 21 0>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_pins>;
|
||||
|
||||
led1 {
|
||||
label = "green:heartbeat";
|
||||
gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "green:mmc0";
|
||||
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "ti,tilcdc,panel";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
|
||||
pinctrl-1 = <&lcd_pins_sleep>;
|
||||
|
||||
display-timings {
|
||||
320x240 {
|
||||
hactive = <320>;
|
||||
vactive = <240>;
|
||||
hback-porch = <68>;
|
||||
hfront-porch = <20>;
|
||||
hsync-len = <1>;
|
||||
vback-porch = <18>;
|
||||
vfront-porch = <4>;
|
||||
vsync-len = <1>;
|
||||
clock-frequency = <9000000>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
};
|
||||
};
|
||||
panel-info {
|
||||
ac-bias = <255>;
|
||||
ac-bias-intrpt = <0>;
|
||||
dma-burst-sz = <16>;
|
||||
bpp = <24>;
|
||||
bus-width = <16>;
|
||||
fdd = <0x80>;
|
||||
sync-edge = <0>;
|
||||
sync-ctrl = <1>;
|
||||
raster-order = <0>;
|
||||
fifo-th = <0>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
pwm7: dmtimer-pwm {
|
||||
compatible = "ti,omap-dmtimer-pwm";
|
||||
ti,timers = <&timer7>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dmtimer7_pins>;
|
||||
};
|
||||
|
||||
vmmcsd_fixed: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cppi41dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&elm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nandflash_pins>;
|
||||
ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
|
||||
status = "okay";
|
||||
|
||||
nand@0,0 {
|
||||
compatible = "ti,omap2-nand";
|
||||
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
||||
interrupt-parent = <&gpmc>;
|
||||
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
||||
<1 IRQ_TYPE_NONE>; /* termcount */
|
||||
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
|
||||
ti,nand-ecc-opt = "bch16";
|
||||
ti,elm-id = <&elm>;
|
||||
nand-bus-width = <8>;
|
||||
gpmc,device-width = <1>;
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <44>;
|
||||
gpmc,cs-wr-off-ns = <44>;
|
||||
gpmc,adv-on-ns = <6>;
|
||||
gpmc,adv-rd-off-ns = <34>;
|
||||
gpmc,adv-wr-off-ns = <44>;
|
||||
gpmc,we-on-ns = <0>;
|
||||
gpmc,we-off-ns = <40>;
|
||||
gpmc,oe-on-ns = <0>;
|
||||
gpmc,oe-off-ns = <54>;
|
||||
gpmc,access-ns = <64>;
|
||||
gpmc,rd-cycle-ns = <82>;
|
||||
gpmc,wr-cycle-ns = <82>;
|
||||
gpmc,bus-turnaround-ns = <0>;
|
||||
gpmc,cycle2cycle-delay-ns = <0>;
|
||||
gpmc,clk-activation-ns = <0>;
|
||||
gpmc,wr-access-ns = <40>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
|
||||
/*
|
||||
* MTD partition table
|
||||
*
|
||||
* All SPL-* partitions are sized to minimal length which can
|
||||
* be independently programmable. For NAND flash this is equal
|
||||
* to size of erase-block.
|
||||
*/
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "SPL";
|
||||
reg = <0x0 0x40000>;
|
||||
};
|
||||
|
||||
partition@1 {
|
||||
label = "SPL.backup1";
|
||||
reg = <0x40000 0x40000>;
|
||||
};
|
||||
|
||||
partition@2 {
|
||||
label = "SPL.backup2";
|
||||
reg = <0x80000 0x40000>;
|
||||
};
|
||||
|
||||
partition@3 {
|
||||
label = "SPL.backup3";
|
||||
reg = <0xc0000 0x40000>;
|
||||
};
|
||||
|
||||
partition@4 {
|
||||
label = "u-boot";
|
||||
reg = <0x100000 0x100000>;
|
||||
};
|
||||
|
||||
partition@5 {
|
||||
label = "u-boot.backup1";
|
||||
reg = <0x200000 0x100000>;
|
||||
};
|
||||
|
||||
partition@6 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x300000 0x40000>;
|
||||
};
|
||||
|
||||
partition@7 {
|
||||
label = "u-boot-env.backup1";
|
||||
reg = <0x340000 0x40000>;
|
||||
};
|
||||
|
||||
partition@8 {
|
||||
label = "UBI";
|
||||
reg = <0x380000 0x1fc80000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
tps: tps@24 {
|
||||
reg = <0x24>;
|
||||
};
|
||||
};
|
||||
|
||||
&lcdc {
|
||||
blue-and-red-wiring = "crossed";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
bus-width = <0x4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
|
||||
clock-names = "ext-clk", "int-clk";
|
||||
system-power-controller;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
ti,pindir-d0-out-d1-in;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
#include "tps65217.dtsi"
|
||||
|
||||
&tps {
|
||||
ti,pmic-shutdown-controller;
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <7>; /* NMI */
|
||||
|
||||
backlight {
|
||||
isel = <1>; /* 1 - ISET1, 2 ISET2 */
|
||||
fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
|
||||
default-brightness = <100>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
dcdc1_reg: regulator@0 {
|
||||
regulator-name = "vdds_dpr";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc2_reg: regulator@1 {
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1351500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc3_reg: regulator@2 {
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1_reg: regulator@3 {
|
||||
regulator-name = "vio,vrtc,vdds";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: regulator@4 {
|
||||
regulator-name = "vdd_3v3aux";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: regulator@5 {
|
||||
regulator-name = "vdd_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo4_reg: regulator@6 {
|
||||
regulator-name = "vdd_3v3a";
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
|
||||
adc {
|
||||
ti,adc-channels = <0 1 2 3 4 5 6>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_ctrl_mod {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&clkout2_pin &gpio_pins>;
|
||||
|
||||
clkout2_pin: pinmux_clkout2_pin {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
|
||||
>;
|
||||
};
|
||||
|
||||
dmtimer7_pins: pinmux_dmtimer7_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5)
|
||||
>;
|
||||
};
|
||||
|
||||
gpio_keys_pins: pinmux_gpio_keys_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
gpio_pins: pinmux_gpio_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
i2c0_pins: pinmux_i2c0_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
>;
|
||||
};
|
||||
|
||||
lcd_disen_pins: pinmux_lcd_disen_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
lcd_pins_default: pinmux_lcd_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
|
||||
AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
|
||||
AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
|
||||
AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
|
||||
AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
|
||||
AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
|
||||
AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
|
||||
AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
|
||||
AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
|
||||
>;
|
||||
};
|
||||
|
||||
lcd_pins_sleep: pinmux_lcd_pins_sleep {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
leds_pins: pinmux_leds_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
spi0_pins: pinmux_spi0_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
|
||||
>;
|
||||
};
|
||||
|
||||
uart0_pins: pinmux_uart0_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
||||
>;
|
||||
};
|
||||
|
||||
nandflash_pins: pinmux_nandflash_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
|
||||
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
|
||||
>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user