[PATCH] merge some from Rusty's trivial patches

This patch contains the most trivial from Rusty's trivial patches:
- spelling fixes
- remove duplicate includes

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Documentation/mono.txt

@@ -30,7 +30,7 @@ other program after you have done the following:
    Read the file 'binfmt_misc.txt' in this directory to know
    more about the configuration process.
 
-3) Add the following enries to /etc/rc.local or similar script
+3) Add the following entries to /etc/rc.local or similar script
    to be run at system startup:
 
 # Insert BINFMT_MISC module into the kernel

Documentation/pci.txt

@@ -84,7 +84,7 @@ Each entry consists of:
 
 Most drivers don't need to use the driver_data field.  Best practice
 for use of driver_data is to use it as an index into a static list of
-equivalant device types, not to use it as a pointer.
+equivalent device types, not to use it as a pointer.
 
 Have a table entry {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID}
 to have probe() called for every PCI device known to the system.

Documentation/sysrq.txt

@@ -171,7 +171,7 @@ the header 'include/linux/sysrq.h', this will define everything else you need.
 Next, you must create a sysrq_key_op struct, and populate it with A) the key
 handler function you will use, B) a help_msg string, that will print when SysRQ
 prints help, and C) an action_msg string, that will print right before your
-handler is called. Your handler must conform to the protoype in 'sysrq.h'.
+handler is called. Your handler must conform to the prototype in 'sysrq.h'.
 
 After the sysrq_key_op is created, you can call the macro 
 register_sysrq_key(int key, struct sysrq_key_op *op_p) that is defined in

arch/ppc/kernel/cpu_setup_6xx.S

@@ -12,7 +12,6 @@
 #include <linux/config.h>
 #include <asm/processor.h>
 #include <asm/page.h>
-#include <asm/ppc_asm.h>
 #include <asm/cputable.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>

arch/ppc/kernel/cpu_setup_power4.S

@@ -14,7 +14,6 @@
 #include <asm/page.h>
 #include <asm/ppc_asm.h>
 #include <asm/cputable.h>
-#include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
 

arch/ppc/kernel/dma-mapping.c

@@ -393,7 +393,7 @@ EXPORT_SYMBOL(__dma_sync);
  * __dma_sync_page() implementation for systems using highmem.
  * In this case, each page of a buffer must be kmapped/kunmapped
  * in order to have a virtual address for __dma_sync(). This must
- * not sleep so kmap_atmomic()/kunmap_atomic() are used.
+ * not sleep so kmap_atomic()/kunmap_atomic() are used.
  *
  * Note: yes, it is possible and correct to have a buffer extend
  * beyond the first page.

arch/ppc64/kernel/cpu_setup_power4.S

@@ -12,7 +12,6 @@
 #include <linux/config.h>
 #include <asm/processor.h>
 #include <asm/page.h>
-#include <asm/ppc_asm.h>
 #include <asm/cputable.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>

drivers/ide/ide-io.c

@@ -560,7 +560,7 @@ ide_startstop_t __ide_abort(ide_drive_t *drive, struct request *rq)
 EXPORT_SYMBOL_GPL(__ide_abort);
 
 /**
- *	ide_abort	-	abort pending IDE operatins
+ *	ide_abort	-	abort pending IDE operations
  *	@drive: drive the error occurred on
  *	@msg: message to report
  *
@@ -623,7 +623,7 @@ static void ide_cmd (ide_drive_t *drive, u8 cmd, u8 nsect,
  *	@drive: drive the completion interrupt occurred on
  *
  *	drive_cmd_intr() is invoked on completion of a special DRIVE_CMD.
- *	We do any necessary daya reading and then wait for the drive to
+ *	We do any necessary data reading and then wait for the drive to
  *	go non busy. At that point we may read the error data and complete
  *	the request
  */
@@ -773,7 +773,7 @@ EXPORT_SYMBOL_GPL(ide_init_sg_cmd);
 
 /**
  *	execute_drive_command	-	issue special drive command
- *	@drive: the drive to issue th command on
+ *	@drive: the drive to issue the command on
  *	@rq: the request structure holding the command
  *
  *	execute_drive_cmd() issues a special drive command,  usually 

drivers/md/md.c

@@ -74,7 +74,7 @@ static DEFINE_SPINLOCK(pers_lock);
  * Current RAID-1,4,5 parallel reconstruction 'guaranteed speed limit'
  * is 1000 KB/sec, so the extra system load does not show up that much.
  * Increase it if you want to have more _guaranteed_ speed. Note that
- * the RAID driver will use the maximum available bandwith if the IO
+ * the RAID driver will use the maximum available bandwidth if the IO
  * subsystem is idle. There is also an 'absolute maximum' reconstruction
  * speed limit - in case reconstruction slows down your system despite
  * idle IO detection.
@@ -3616,7 +3616,7 @@ static void md_do_sync(mddev_t *mddev)
 	printk(KERN_INFO "md: syncing RAID array %s\n", mdname(mddev));
 	printk(KERN_INFO "md: minimum _guaranteed_ reconstruction speed:"
 		" %d KB/sec/disc.\n", sysctl_speed_limit_min);
-	printk(KERN_INFO "md: using maximum available idle IO bandwith "
+	printk(KERN_INFO "md: using maximum available idle IO bandwidth "
 	       "(but not more than %d KB/sec) for reconstruction.\n",
 	       sysctl_speed_limit_max);
 

drivers/parisc/lasi.c

@@ -20,7 +20,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/pm.h>
-#include <linux/slab.h>
 #include <linux/types.h>
 
 #include <asm/io.h>

drivers/scsi/ibmmca.c

@@ -36,7 +36,6 @@
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
 #include <linux/mca.h>
-#include <linux/string.h>
 #include <linux/spinlock.h>
 #include <linux/init.h>
 #include <linux/mca-legacy.h>

ipc/mqueue.c

@@ -69,7 +69,7 @@ struct mqueue_inode_info {
 
 	struct sigevent notify;
 	pid_t notify_owner;
- 	struct user_struct *user;	/* user who created, for accouting */
+	struct user_struct *user;	/* user who created, for accounting */
 	struct sock *notify_sock;
 	struct sk_buff *notify_cookie;