mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-26 22:24:09 +08:00
usb: dwc3: make usb2 phy utmi interface configurable
Support to configure the UTMI+ PHY with an 8- or 16-bit interface via DT. The UTMI+ PHY interface is a hardware capability, and it's platform dependent. Normally, the PHYIF can be configured during coreconsultant. But for some specific USB cores(e.g. rk3399 SoC DWC3), the default PHYIF configuration value is false, so we need to reconfigure it by software. Signed-off-by: William Wu <william.wu@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This commit is contained in:
parent
16199f3389
commit
32f2ed864d
@ -11,6 +11,11 @@ Optional properties:
|
||||
"peripheral" and "otg". In case this attribute isn't
|
||||
passed via DT, USB DRD controllers should default to
|
||||
OTG.
|
||||
- phy_type: tells USB controllers that we want to configure the core to support
|
||||
a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is
|
||||
selected. Valid arguments are "utmi" and "utmi_wide".
|
||||
In case this isn't passed via DT, USB controllers should
|
||||
default to HW capability.
|
||||
- otg-rev: tells usb driver the release number of the OTG and EH supplement
|
||||
with which the device and its descriptors are compliant,
|
||||
in binary-coded decimal (i.e. 2.0 is 0200H). This
|
||||
@ -34,6 +39,7 @@ dwc3@4a030000 {
|
||||
usb-phy = <&usb2_phy>, <&usb3,phy>;
|
||||
maximum-speed = "super-speed";
|
||||
dr_mode = "otg";
|
||||
phy_type = "utmi_wide";
|
||||
otg-rev = <0x0200>;
|
||||
adp-disable;
|
||||
};
|
||||
|
@ -485,6 +485,23 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
|
||||
break;
|
||||
}
|
||||
|
||||
switch (dwc->hsphy_mode) {
|
||||
case USBPHY_INTERFACE_MODE_UTMI:
|
||||
reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
|
||||
DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
|
||||
reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) |
|
||||
DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT);
|
||||
break;
|
||||
case USBPHY_INTERFACE_MODE_UTMIW:
|
||||
reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
|
||||
DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
|
||||
reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) |
|
||||
DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
/*
|
||||
* Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
|
||||
* '0' during coreConsultant configuration. So default value will
|
||||
@ -891,6 +908,7 @@ static int dwc3_probe(struct platform_device *pdev)
|
||||
|
||||
dwc->maximum_speed = usb_get_maximum_speed(dev);
|
||||
dwc->dr_mode = usb_get_dr_mode(dev);
|
||||
dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
|
||||
|
||||
dwc->has_lpm_erratum = device_property_read_bool(dev,
|
||||
"snps,has-lpm-erratum");
|
||||
|
@ -203,6 +203,14 @@
|
||||
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
|
||||
#define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4)
|
||||
#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8)
|
||||
#define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3)
|
||||
#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1)
|
||||
#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10)
|
||||
#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf)
|
||||
#define USBTRDTIM_UTMI_8_BIT 9
|
||||
#define USBTRDTIM_UTMI_16_BIT 5
|
||||
#define UTMI_PHYIF_16_BIT 1
|
||||
#define UTMI_PHYIF_8_BIT 0
|
||||
|
||||
/* Global USB2 PHY Vendor Control Register */
|
||||
#define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25)
|
||||
@ -748,6 +756,9 @@ struct dwc3_scratchpad_array {
|
||||
* @maximum_speed: maximum speed requested (mainly for testing purposes)
|
||||
* @revision: revision register contents
|
||||
* @dr_mode: requested mode of operation
|
||||
* @hsphy_mode: UTMI phy mode, one of following:
|
||||
* - USBPHY_INTERFACE_MODE_UTMI
|
||||
* - USBPHY_INTERFACE_MODE_UTMIW
|
||||
* @usb2_phy: pointer to USB2 PHY
|
||||
* @usb3_phy: pointer to USB3 PHY
|
||||
* @usb2_generic_phy: pointer to USB2 PHY
|
||||
@ -853,6 +864,7 @@ struct dwc3 {
|
||||
size_t regs_size;
|
||||
|
||||
enum usb_dr_mode dr_mode;
|
||||
enum usb_phy_interface hsphy_mode;
|
||||
|
||||
u32 fladj;
|
||||
u32 irq_gadget;
|
||||
|
Loading…
Reference in New Issue
Block a user