gpio: gemini: augment DT bindings

The DT bindings assumed that this IP block was coming from
Cortina Systems, which turns out not to be true. It is a
standard IP block from Faraday Technology and also used in the
Moxa moxart SoC.

We augment the bindings to cover all existing parts and rename
it after the IP block. This involves deleting the old Moxa
bindings that now are contained in this binding.

Cc: devicetree@vger.kernel.org
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt

@@ -1,8 +1,11 @@
-Cortina Systems Gemini GPIO Controller
+Faraday Technology FTGPIO010 GPIO Controller
 
 Required properties:
 
-- compatible : Must be "cortina,gemini-gpio"
+- compatible : Should be one of
+  "cortina,gemini-gpio", "faraday,ftgpio010"
+  "moxa,moxart-gpio", "faraday,ftgpio010"
+  "faraday,ftgpio010"
 - reg : Should contain registers location and length
 - interrupts : Should contain the interrupt line for the GPIO block
 - gpio-controller : marks this as a GPIO controller
@@ -14,7 +17,7 @@ Required properties:
 Example:
 
 gpio@4d000000 {
-	compatible = "cortina,gemini-gpio";
+	compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
 	reg = <0x4d000000 0x100>;
 	interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
 	gpio-controller;

Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt

@@ -1,19 +0,0 @@
-MOXA ART GPIO Controller
-
-Required properties:
-
-- #gpio-cells : Should be 2, The first cell is the pin number,
-		the second cell is used to specify polarity:
-			0 = active high
-			1 = active low
-- compatible : Must be "moxa,moxart-gpio"
-- reg : Should contain registers location and length
-
-Example:
-
-	gpio: gpio@98700000 {
-		gpio-controller;
-		#gpio-cells = <2>;
-		compatible = "moxa,moxart-gpio";
-		reg =	<0x98700000 0xC>;
-	};