mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-14 16:23:51 +08:00
Bluetooth: Send HCI Set Event Mask Page 2 command only when needed
The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This commit is contained in:
parent
329d823098
commit
313f6888c8
@ -548,6 +548,7 @@ static void hci_set_event_mask_page_2(struct hci_request *req)
|
||||
{
|
||||
struct hci_dev *hdev = req->hdev;
|
||||
u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
|
||||
bool changed = false;
|
||||
|
||||
/* If Connectionless Slave Broadcast master role is supported
|
||||
* enable all necessary events for it.
|
||||
@ -557,6 +558,7 @@ static void hci_set_event_mask_page_2(struct hci_request *req)
|
||||
events[1] |= 0x80; /* Synchronization Train Complete */
|
||||
events[2] |= 0x10; /* Slave Page Response Timeout */
|
||||
events[2] |= 0x20; /* CSB Channel Map Change */
|
||||
changed = true;
|
||||
}
|
||||
|
||||
/* If Connectionless Slave Broadcast slave role is supported
|
||||
@ -567,13 +569,24 @@ static void hci_set_event_mask_page_2(struct hci_request *req)
|
||||
events[2] |= 0x02; /* CSB Receive */
|
||||
events[2] |= 0x04; /* CSB Timeout */
|
||||
events[2] |= 0x08; /* Truncated Page Complete */
|
||||
changed = true;
|
||||
}
|
||||
|
||||
/* Enable Authenticated Payload Timeout Expired event if supported */
|
||||
if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING)
|
||||
if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) {
|
||||
events[2] |= 0x80;
|
||||
changed = true;
|
||||
}
|
||||
|
||||
hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, sizeof(events), events);
|
||||
/* Some Broadcom based controllers indicate support for Set Event
|
||||
* Mask Page 2 command, but then actually do not support it. Since
|
||||
* the default value is all bits set to zero, the command is only
|
||||
* required if the event mask has to be changed. In case no change
|
||||
* to the event mask is needed, skip this command.
|
||||
*/
|
||||
if (changed)
|
||||
hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2,
|
||||
sizeof(events), events);
|
||||
}
|
||||
|
||||
static int hci_init3_req(struct hci_request *req, unsigned long opt)
|
||||
|
Loading…
Reference in New Issue
Block a user