renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-17 09:43:59 +08:00
Code

This pull request contains the second batch of changes for Broadcom

Browse Source 
ARM-based SoCs, please pull the following:
 
 - Nicolas declares a CMA area within the first 1GB of DRAM in order for
   it to be guaranteed to reside there, otherwise ARM64's memory
   initialization will pick up a CMA area within ZONE_DMA32
 
 - Stefan adds the Device Tree node for the built-in Ethernet controller
   (GENET) on the Raspberry Pi 4 model B board
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl3S0/UACgkQh9CWnEQH
 BwT8TRAA4dc59NUOpqSZfTZeKV4gHlATVVwB08a2e1j3KW3lfac9C1uwEq/7EsDv
 oj4s+8Uy1Gu70Vd4ii7RGcgWhkkE3J95K48pDqPh9YyfhYxPaboxr1elwGnUmcE4
 Seys0PuK/H1xzc2H/SHUEjodZ2XC0fmCS4pgOmMHND5kD4/jFFg67pjg71vA6NjY
 Gpzgqhx7vwlgn/jyf7yb8nNRk9jm4a6BDZDMK6BRWeSJ3IArZrhYnsHqv2sX1Kj4
 VvKj0nd3rZmZkglfSeRK48/TBpxUneIzhMAp+Si3zq/HRjZR1TQRdKZuH3zloD2K
 oqWV2ZSmcTrQChjaDow2BZl5LbG33RFut+u1Ak+k66YR4Y+PlA3UIePcQXwiqjes
 1o/Wubh5YnV13MFsUB63R275AN5p8/NHEZNxZp2+9Z200mKFPzNwvh4UhHDyZ/Z9
 D0UrDSTjGBpHCH2SMIXTz1pW67S899hV/Jh8GKbXLzgveUtsc1soBxVBcECmhz6X
 yEJ9b2g3FW1mnd4cJSe6ONqLaxzULA2CWOfhdKDfoJ4aqbqdKCXCWyZ03yJW+BVM
 vwxpCkLrpmtRhm9n8I8ZhxE3MqiIkp2AzKh3HgW5u5Cxf0znOCoToUTfIZHjMQHs
 1ldxdyNrIJEU3kbYJV+BO24W/Y27snoHzi+/pCE5IVMGYdxfE5A=
 =yVJh
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.5/devicetree-part2' of https://github.com/Broadcom/stblinux into arm/fixes

This pull request contains the second batch of changes for Broadcom
ARM-based SoCs, please pull the following:

- Nicolas declares a CMA area within the first 1GB of DRAM in order for
  it to be guaranteed to reside there, otherwise ARM64's memory
  initialization will pick up a CMA area within ZONE_DMA32

- Stefan adds the Device Tree node for the built-in Ethernet controller
  (GENET) on the Raspberry Pi 4 model B board

* tag 'arm-soc/for-5.5/devicetree-part2' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm2711-rpi-4: Enable GENET support
  ARM: dts: bcm2711: force CMA into first GB of memory

Link: https://lore.kernel.org/r/20191118182931.11884-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2019-12-06 08:29:54 -08:00
commit 30f55eae47
2 changed files with 63 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
arch/arm/boot/dts/bcm2711-rpi-4-b.dts
View File

@ -19,6 +19,10 @@
reg = <0 0 0>;
};
aliases {
ethernet0 = &genet;
};
leds {
act {
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
@ -97,6 +101,19 @@
status = "okay";
};
&genet {
phy-handle = <&phy1>;
phy-mode = "rgmii-rxid";
status = "okay";
};
&genet_mdio {
phy1: ethernet-phy@1 {
/* No PHY interrupt */
reg = <0x1>;
};
};
/* uart0 communicates with the BT module */
&uart0 {
pinctrl-names = "default";

46
arch/arm/boot/dts/bcm2711.dtsi
View File

@ -12,6 +12,26 @@
interrupt-parent = <&gicv2>;
reserved-memory {
#address-cells = <2>;
#size-cells = <1>;
ranges;
/*
* arm64 reserves the CMA by default somewhere in ZONE_DMA32,
* that's not good enough for the BCM2711 as some devices can
* only address the lower 1G of memory (ZONE_DMA).
*/
linux,cma {
compatible = "shared-dma-pool";
size = <0x2000000>; /* 32MB */
alloc-ranges = <0x0 0x00000000 0x40000000>;
reusable;
linux,cma-default;
};
};
soc {
/*
* Defined ranges:
@ -305,6 +325,32 @@
cpu-release-addr = <0x0 0x000000f0>;
};
};
scb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>;
genet: ethernet@7d580000 {
compatible = "brcm,bcm2711-genet-v5";
reg = <0x0 0x7d580000 0x10000>;
#address-cells = <0x1>;
#size-cells = <0x1>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
genet_mdio: mdio@e14 {
compatible = "brcm,genet-mdio-v5";
reg = <0xe14 0x8>;
reg-names = "mdio";
#address-cells = <0x0>;
#size-cells = <0x1>;
};
};
};
};
&clk_osc {