mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-16 01:04:08 +08:00
i2c: add support for Amlogic Meson I2C controller
This is a driver for the I2C controller found in Amlogic Meson SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
parent
c9449affad
commit
30021e3707
24
Documentation/devicetree/bindings/i2c/i2c-meson.txt
Normal file
24
Documentation/devicetree/bindings/i2c/i2c-meson.txt
Normal file
@ -0,0 +1,24 @@
|
||||
Amlogic Meson I2C controller
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "amlogic,meson6-i2c"
|
||||
- reg: physical address and length of the device registers
|
||||
- interrupts: a single interrupt specifier
|
||||
- clocks: clock for the device
|
||||
- #address-cells: should be <1>
|
||||
- #size-cells: should be <0>
|
||||
|
||||
Optional properties:
|
||||
- clock-frequency: the desired I2C bus clock frequency in Hz; in
|
||||
absence of this property the default value is used (100 kHz).
|
||||
|
||||
Examples:
|
||||
|
||||
i2c@c8100500 {
|
||||
compatible = "amlogic,meson6-i2c";
|
||||
reg = <0xc8100500 0x20>;
|
||||
interrupts = <0 92 1>;
|
||||
clocks = <&clk81>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
@ -564,6 +564,13 @@ config I2C_KEMPLD
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-kempld.
|
||||
|
||||
config I2C_MESON
|
||||
tristate "Amlogic Meson I2C controller"
|
||||
depends on ARCH_MESON
|
||||
help
|
||||
If you say yes to this option, support will be included for the
|
||||
I2C interface on the Amlogic Meson family of SoCs.
|
||||
|
||||
config I2C_MPC
|
||||
tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
|
||||
depends on PPC
|
||||
|
@ -54,6 +54,7 @@ obj-$(CONFIG_I2C_IMG) += i2c-img-scb.o
|
||||
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
|
||||
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
|
||||
obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
|
||||
obj-$(CONFIG_I2C_MESON) += i2c-meson.o
|
||||
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
|
||||
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
|
||||
obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
|
||||
|
492
drivers/i2c/busses/i2c-meson.c
Normal file
492
drivers/i2c/busses/i2c-meson.c
Normal file
@ -0,0 +1,492 @@
|
||||
/*
|
||||
* I2C bus driver for Amlogic Meson SoCs
|
||||
*
|
||||
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/completion.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
/* Meson I2C register map */
|
||||
#define REG_CTRL 0x00
|
||||
#define REG_SLAVE_ADDR 0x04
|
||||
#define REG_TOK_LIST0 0x08
|
||||
#define REG_TOK_LIST1 0x0c
|
||||
#define REG_TOK_WDATA0 0x10
|
||||
#define REG_TOK_WDATA1 0x14
|
||||
#define REG_TOK_RDATA0 0x18
|
||||
#define REG_TOK_RDATA1 0x1c
|
||||
|
||||
/* Control register fields */
|
||||
#define REG_CTRL_START BIT(0)
|
||||
#define REG_CTRL_ACK_IGNORE BIT(1)
|
||||
#define REG_CTRL_STATUS BIT(2)
|
||||
#define REG_CTRL_ERROR BIT(3)
|
||||
#define REG_CTRL_CLKDIV_SHIFT 12
|
||||
#define REG_CTRL_CLKDIV_MASK ((BIT(10) - 1) << REG_CTRL_CLKDIV_SHIFT)
|
||||
|
||||
#define I2C_TIMEOUT_MS 500
|
||||
#define DEFAULT_FREQ 100000
|
||||
|
||||
enum {
|
||||
TOKEN_END = 0,
|
||||
TOKEN_START,
|
||||
TOKEN_SLAVE_ADDR_WRITE,
|
||||
TOKEN_SLAVE_ADDR_READ,
|
||||
TOKEN_DATA,
|
||||
TOKEN_DATA_LAST,
|
||||
TOKEN_STOP,
|
||||
};
|
||||
|
||||
enum {
|
||||
STATE_IDLE,
|
||||
STATE_READ,
|
||||
STATE_WRITE,
|
||||
STATE_STOP,
|
||||
};
|
||||
|
||||
/**
|
||||
* struct meson_i2c - Meson I2C device private data
|
||||
*
|
||||
* @adap: I2C adapter instance
|
||||
* @dev: Pointer to device structure
|
||||
* @regs: Base address of the device memory mapped registers
|
||||
* @clk: Pointer to clock structure
|
||||
* @irq: IRQ number
|
||||
* @msg: Pointer to the current I2C message
|
||||
* @state: Current state in the driver state machine
|
||||
* @last: Flag set for the last message in the transfer
|
||||
* @count: Number of bytes to be sent/received in current transfer
|
||||
* @pos: Current position in the send/receive buffer
|
||||
* @error: Flag set when an error is received
|
||||
* @lock: To avoid race conditions between irq handler and xfer code
|
||||
* @done: Completion used to wait for transfer termination
|
||||
* @frequency: Operating frequency of I2C bus clock
|
||||
* @tokens: Sequence of tokens to be written to the device
|
||||
* @num_tokens: Number of tokens
|
||||
*/
|
||||
struct meson_i2c {
|
||||
struct i2c_adapter adap;
|
||||
struct device *dev;
|
||||
void __iomem *regs;
|
||||
struct clk *clk;
|
||||
int irq;
|
||||
|
||||
struct i2c_msg *msg;
|
||||
int state;
|
||||
bool last;
|
||||
int count;
|
||||
int pos;
|
||||
int error;
|
||||
|
||||
spinlock_t lock;
|
||||
struct completion done;
|
||||
unsigned int frequency;
|
||||
u32 tokens[2];
|
||||
int num_tokens;
|
||||
};
|
||||
|
||||
static void meson_i2c_set_mask(struct meson_i2c *i2c, int reg, u32 mask,
|
||||
u32 val)
|
||||
{
|
||||
u32 data;
|
||||
|
||||
data = readl(i2c->regs + reg);
|
||||
data &= ~mask;
|
||||
data |= val & mask;
|
||||
writel(data, i2c->regs + reg);
|
||||
}
|
||||
|
||||
static void meson_i2c_reset_tokens(struct meson_i2c *i2c)
|
||||
{
|
||||
i2c->tokens[0] = 0;
|
||||
i2c->tokens[1] = 0;
|
||||
i2c->num_tokens = 0;
|
||||
}
|
||||
|
||||
static void meson_i2c_add_token(struct meson_i2c *i2c, int token)
|
||||
{
|
||||
if (i2c->num_tokens < 8)
|
||||
i2c->tokens[0] |= (token & 0xf) << (i2c->num_tokens * 4);
|
||||
else
|
||||
i2c->tokens[1] |= (token & 0xf) << ((i2c->num_tokens % 8) * 4);
|
||||
|
||||
i2c->num_tokens++;
|
||||
}
|
||||
|
||||
static void meson_i2c_write_tokens(struct meson_i2c *i2c)
|
||||
{
|
||||
writel(i2c->tokens[0], i2c->regs + REG_TOK_LIST0);
|
||||
writel(i2c->tokens[1], i2c->regs + REG_TOK_LIST1);
|
||||
}
|
||||
|
||||
static void meson_i2c_set_clk_div(struct meson_i2c *i2c)
|
||||
{
|
||||
unsigned long clk_rate = clk_get_rate(i2c->clk);
|
||||
unsigned int div;
|
||||
|
||||
div = DIV_ROUND_UP(clk_rate, i2c->frequency * 4);
|
||||
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK,
|
||||
div << REG_CTRL_CLKDIV_SHIFT);
|
||||
|
||||
dev_dbg(i2c->dev, "%s: clk %lu, freq %u, div %u\n", __func__,
|
||||
clk_rate, i2c->frequency, div);
|
||||
}
|
||||
|
||||
static void meson_i2c_get_data(struct meson_i2c *i2c, char *buf, int len)
|
||||
{
|
||||
u32 rdata0, rdata1;
|
||||
int i;
|
||||
|
||||
rdata0 = readl(i2c->regs + REG_TOK_RDATA0);
|
||||
rdata1 = readl(i2c->regs + REG_TOK_RDATA1);
|
||||
|
||||
dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__,
|
||||
rdata0, rdata1, len);
|
||||
|
||||
for (i = 0; i < min_t(int, 4, len); i++)
|
||||
*buf++ = (rdata0 >> i * 8) & 0xff;
|
||||
|
||||
for (i = 4; i < min_t(int, 8, len); i++)
|
||||
*buf++ = (rdata1 >> (i - 4) * 8) & 0xff;
|
||||
}
|
||||
|
||||
static void meson_i2c_put_data(struct meson_i2c *i2c, char *buf, int len)
|
||||
{
|
||||
u32 wdata0 = 0, wdata1 = 0;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < min_t(int, 4, len); i++)
|
||||
wdata0 |= *buf++ << (i * 8);
|
||||
|
||||
for (i = 4; i < min_t(int, 8, len); i++)
|
||||
wdata1 |= *buf++ << ((i - 4) * 8);
|
||||
|
||||
writel(wdata0, i2c->regs + REG_TOK_WDATA0);
|
||||
writel(wdata0, i2c->regs + REG_TOK_WDATA1);
|
||||
|
||||
dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__,
|
||||
wdata0, wdata1, len);
|
||||
}
|
||||
|
||||
static void meson_i2c_prepare_xfer(struct meson_i2c *i2c)
|
||||
{
|
||||
bool write = !(i2c->msg->flags & I2C_M_RD);
|
||||
int i;
|
||||
|
||||
i2c->count = min_t(int, i2c->msg->len - i2c->pos, 8);
|
||||
|
||||
for (i = 0; i < i2c->count - 1; i++)
|
||||
meson_i2c_add_token(i2c, TOKEN_DATA);
|
||||
|
||||
if (i2c->count) {
|
||||
if (write || i2c->pos + i2c->count < i2c->msg->len)
|
||||
meson_i2c_add_token(i2c, TOKEN_DATA);
|
||||
else
|
||||
meson_i2c_add_token(i2c, TOKEN_DATA_LAST);
|
||||
}
|
||||
|
||||
if (write)
|
||||
meson_i2c_put_data(i2c, i2c->msg->buf + i2c->pos, i2c->count);
|
||||
}
|
||||
|
||||
static void meson_i2c_stop(struct meson_i2c *i2c)
|
||||
{
|
||||
dev_dbg(i2c->dev, "%s: last %d\n", __func__, i2c->last);
|
||||
|
||||
if (i2c->last) {
|
||||
i2c->state = STATE_STOP;
|
||||
meson_i2c_add_token(i2c, TOKEN_STOP);
|
||||
} else {
|
||||
i2c->state = STATE_IDLE;
|
||||
complete_all(&i2c->done);
|
||||
}
|
||||
}
|
||||
|
||||
static irqreturn_t meson_i2c_irq(int irqno, void *dev_id)
|
||||
{
|
||||
struct meson_i2c *i2c = dev_id;
|
||||
unsigned int ctrl;
|
||||
|
||||
spin_lock(&i2c->lock);
|
||||
|
||||
meson_i2c_reset_tokens(i2c);
|
||||
ctrl = readl(i2c->regs + REG_CTRL);
|
||||
|
||||
dev_dbg(i2c->dev, "irq: state %d, pos %d, count %d, ctrl %08x\n",
|
||||
i2c->state, i2c->pos, i2c->count, ctrl);
|
||||
|
||||
if (ctrl & REG_CTRL_ERROR && i2c->state != STATE_IDLE) {
|
||||
/*
|
||||
* The bit is set when the IGNORE_NAK bit is cleared
|
||||
* and the device didn't respond. In this case, the
|
||||
* I2C controller automatically generates a STOP
|
||||
* condition.
|
||||
*/
|
||||
dev_dbg(i2c->dev, "error bit set\n");
|
||||
i2c->error = -ENXIO;
|
||||
i2c->state = STATE_IDLE;
|
||||
complete_all(&i2c->done);
|
||||
goto out;
|
||||
}
|
||||
|
||||
switch (i2c->state) {
|
||||
case STATE_READ:
|
||||
if (i2c->count > 0) {
|
||||
meson_i2c_get_data(i2c, i2c->msg->buf + i2c->pos,
|
||||
i2c->count);
|
||||
i2c->pos += i2c->count;
|
||||
}
|
||||
|
||||
if (i2c->pos >= i2c->msg->len) {
|
||||
meson_i2c_stop(i2c);
|
||||
break;
|
||||
}
|
||||
|
||||
meson_i2c_prepare_xfer(i2c);
|
||||
break;
|
||||
case STATE_WRITE:
|
||||
i2c->pos += i2c->count;
|
||||
|
||||
if (i2c->pos >= i2c->msg->len) {
|
||||
meson_i2c_stop(i2c);
|
||||
break;
|
||||
}
|
||||
|
||||
meson_i2c_prepare_xfer(i2c);
|
||||
break;
|
||||
case STATE_STOP:
|
||||
i2c->state = STATE_IDLE;
|
||||
complete_all(&i2c->done);
|
||||
break;
|
||||
case STATE_IDLE:
|
||||
break;
|
||||
}
|
||||
|
||||
out:
|
||||
if (i2c->state != STATE_IDLE) {
|
||||
/* Restart the processing */
|
||||
meson_i2c_write_tokens(i2c);
|
||||
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
|
||||
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START,
|
||||
REG_CTRL_START);
|
||||
}
|
||||
|
||||
spin_unlock(&i2c->lock);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg)
|
||||
{
|
||||
int token;
|
||||
|
||||
token = (msg->flags & I2C_M_RD) ? TOKEN_SLAVE_ADDR_READ :
|
||||
TOKEN_SLAVE_ADDR_WRITE;
|
||||
|
||||
writel(msg->addr << 1, i2c->regs + REG_SLAVE_ADDR);
|
||||
meson_i2c_add_token(i2c, TOKEN_START);
|
||||
meson_i2c_add_token(i2c, token);
|
||||
}
|
||||
|
||||
static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg,
|
||||
int last)
|
||||
{
|
||||
unsigned long time_left, flags;
|
||||
int ret = 0;
|
||||
|
||||
i2c->msg = msg;
|
||||
i2c->last = last;
|
||||
i2c->pos = 0;
|
||||
i2c->count = 0;
|
||||
i2c->error = 0;
|
||||
|
||||
meson_i2c_reset_tokens(i2c);
|
||||
|
||||
flags = (msg->flags & I2C_M_IGNORE_NAK) ? REG_CTRL_ACK_IGNORE : 0;
|
||||
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_ACK_IGNORE, flags);
|
||||
|
||||
if (!(msg->flags & I2C_M_NOSTART))
|
||||
meson_i2c_do_start(i2c, msg);
|
||||
|
||||
i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
|
||||
meson_i2c_prepare_xfer(i2c);
|
||||
meson_i2c_write_tokens(i2c);
|
||||
reinit_completion(&i2c->done);
|
||||
|
||||
/* Start the transfer */
|
||||
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, REG_CTRL_START);
|
||||
|
||||
time_left = msecs_to_jiffies(I2C_TIMEOUT_MS);
|
||||
time_left = wait_for_completion_timeout(&i2c->done, time_left);
|
||||
|
||||
/*
|
||||
* Protect access to i2c struct and registers from interrupt
|
||||
* handlers triggered by a transfer terminated after the
|
||||
* timeout period
|
||||
*/
|
||||
spin_lock_irqsave(&i2c->lock, flags);
|
||||
|
||||
/* Abort any active operation */
|
||||
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
|
||||
|
||||
if (!time_left) {
|
||||
i2c->state = STATE_IDLE;
|
||||
ret = -ETIMEDOUT;
|
||||
}
|
||||
|
||||
if (i2c->error)
|
||||
ret = i2c->error;
|
||||
|
||||
spin_unlock_irqrestore(&i2c->lock, flags);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int meson_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
||||
int num)
|
||||
{
|
||||
struct meson_i2c *i2c = adap->algo_data;
|
||||
int i, ret = 0, count = 0;
|
||||
|
||||
clk_enable(i2c->clk);
|
||||
meson_i2c_set_clk_div(i2c);
|
||||
|
||||
for (i = 0; i < num; i++) {
|
||||
ret = meson_i2c_xfer_msg(i2c, msgs + i, i == num - 1);
|
||||
if (ret)
|
||||
break;
|
||||
count++;
|
||||
}
|
||||
|
||||
clk_disable(i2c->clk);
|
||||
|
||||
return ret ? ret : count;
|
||||
}
|
||||
|
||||
static u32 meson_i2c_func(struct i2c_adapter *adap)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
||||
}
|
||||
|
||||
static const struct i2c_algorithm meson_i2c_algorithm = {
|
||||
.master_xfer = meson_i2c_xfer,
|
||||
.functionality = meson_i2c_func,
|
||||
};
|
||||
|
||||
static int meson_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
struct meson_i2c *i2c;
|
||||
struct resource *mem;
|
||||
int ret = 0;
|
||||
|
||||
i2c = devm_kzalloc(&pdev->dev, sizeof(struct meson_i2c), GFP_KERNEL);
|
||||
if (!i2c)
|
||||
return -ENOMEM;
|
||||
|
||||
if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
|
||||
&i2c->frequency))
|
||||
i2c->frequency = DEFAULT_FREQ;
|
||||
|
||||
i2c->dev = &pdev->dev;
|
||||
platform_set_drvdata(pdev, i2c);
|
||||
|
||||
spin_lock_init(&i2c->lock);
|
||||
init_completion(&i2c->done);
|
||||
|
||||
i2c->clk = devm_clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(i2c->clk)) {
|
||||
dev_err(&pdev->dev, "can't get device clock\n");
|
||||
return PTR_ERR(i2c->clk);
|
||||
}
|
||||
|
||||
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
|
||||
if (IS_ERR(i2c->regs))
|
||||
return PTR_ERR(i2c->regs);
|
||||
|
||||
i2c->irq = platform_get_irq(pdev, 0);
|
||||
if (i2c->irq < 0) {
|
||||
dev_err(&pdev->dev, "can't find IRQ\n");
|
||||
return i2c->irq;
|
||||
}
|
||||
|
||||
ret = devm_request_irq(&pdev->dev, i2c->irq, meson_i2c_irq,
|
||||
0, dev_name(&pdev->dev), i2c);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "can't request IRQ\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = clk_prepare(i2c->clk);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "can't prepare clock\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
strlcpy(i2c->adap.name, "Meson I2C adapter",
|
||||
sizeof(i2c->adap.name));
|
||||
i2c->adap.owner = THIS_MODULE;
|
||||
i2c->adap.algo = &meson_i2c_algorithm;
|
||||
i2c->adap.dev.parent = &pdev->dev;
|
||||
i2c->adap.dev.of_node = np;
|
||||
i2c->adap.algo_data = i2c;
|
||||
|
||||
/*
|
||||
* A transfer is triggered when START bit changes from 0 to 1.
|
||||
* Ensure that the bit is set to 0 after probe
|
||||
*/
|
||||
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
|
||||
|
||||
ret = i2c_add_adapter(&i2c->adap);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "can't register adapter\n");
|
||||
clk_unprepare(i2c->clk);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int meson_i2c_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct meson_i2c *i2c = platform_get_drvdata(pdev);
|
||||
|
||||
i2c_del_adapter(&i2c->adap);
|
||||
clk_unprepare(i2c->clk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id meson_i2c_match[] = {
|
||||
{ .compatible = "amlogic,meson6-i2c" },
|
||||
{ },
|
||||
};
|
||||
|
||||
static struct platform_driver meson_i2c_driver = {
|
||||
.probe = meson_i2c_probe,
|
||||
.remove = meson_i2c_remove,
|
||||
.driver = {
|
||||
.name = "meson-i2c",
|
||||
.of_match_table = meson_i2c_match,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(meson_i2c_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Amlogic Meson I2C Bus driver");
|
||||
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in New Issue
Block a user