renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-30 16:13:54 +08:00
Code

rtl8187: Fix driver to return TX retry info for RTL8187L

Browse Source 
Current code for the RTL8187 is not returning valid retry information, thus the
rate-setting mechanism is not functioning. As a further complication, this info
is only obtained by reading a register, which cannot be read while in interrupt
context.

This patch implements the TX status return to mac80211 through the use of a
work queue.

One additional problem is that the driver currently enables the rate fallback
mechanism of the device, which conflicts with the mac80211 rate-setting
algorithm. This version of the patch disables rate fallback.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Tested-by: Martín Ernesto Barreyro <barreyromartin@gmail.com>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Larry Finger 2009-01-23 11:40:22 -06:00 committed by John W. Linville
parent 2a57cf3e83
commit 2f47690ed4
2 changed files with 58 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
drivers/net/wireless/rtl818x/rtl8187.h
View File

@ -100,6 +100,8 @@ struct rtl8187_priv {
struct usb_device *udev;
u32 rx_conf;
struct usb_anchor anchored;
struct delayed_work work;
struct ieee80211_hw *dev;
u16 txpwr_base;
u8 asic_rev;
u8 is_rtl8187b;
@ -117,7 +119,7 @@ struct rtl8187_priv {
struct {
__le64 buf;
struct sk_buff_head queue;
} b_tx_status;
} b_tx_status; /* This queue is used by both -b and non-b devices */
};
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);

73
drivers/net/wireless/rtl818x/rtl8187_dev.c
View File

@ -177,25 +177,33 @@ static void rtl8187_tx_cb(struct urb *urb)
sizeof(struct rtl8187_tx_hdr));
ieee80211_tx_info_clear_status(info);
if (!urb->status &&
!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
priv->is_rtl8187b) {
skb_queue_tail(&priv->b_tx_status.queue, skb);
if (!(urb->status) && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
if (priv->is_rtl8187b) {
skb_queue_tail(&priv->b_tx_status.queue, skb);
/* queue is "full", discard last items */
while (skb_queue_len(&priv->b_tx_status.queue) > 5) {
struct sk_buff *old_skb;
/* queue is "full", discard last items */
while (skb_queue_len(&priv->b_tx_status.queue) > 5) {
struct sk_buff *old_skb;
dev_dbg(&priv->udev->dev,
"transmit status queue full\n");
dev_dbg(&priv->udev->dev,
"transmit status queue full\n");
old_skb = skb_dequeue(&priv->b_tx_status.queue);
ieee80211_tx_status_irqsafe(hw, old_skb);
}
} else {
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !urb->status)
old_skb = skb_dequeue(&priv->b_tx_status.queue);
ieee80211_tx_status_irqsafe(hw, old_skb);
}
return;
} else {
info->flags |= IEEE80211_TX_STAT_ACK;
}
}
if (priv->is_rtl8187b)
ieee80211_tx_status_irqsafe(hw, skb);
else {
/* Retry information for the RTI8187 is only available by
* reading a register in the device. We are in interrupt mode
* here, thus queue the skb and finish on a work queue. */
skb_queue_tail(&priv->b_tx_status.queue, skb);
queue_delayed_work(hw->workqueue, &priv->work, 0);
}
}
@ -645,7 +653,7 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0);
// TODO: set RESP_RATE and BRSR properly
rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
@ -765,9 +773,6 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1);
reg = rtl818x_ioread8(priv, &priv->map->RATE_FALLBACK);
reg |= RTL818X_RATE_FALLBACK_ENABLE;
rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, reg);
rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
@ -855,6 +860,34 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
return 0;
}
static void rtl8187_work(struct work_struct *work)
{
/* The RTL8187 returns the retry count through register 0xFFFA. In
* addition, it appears to be a cumulative retry count, not the
* value for the current TX packet. When multiple TX entries are
* queued, the retry count will be valid for the last one in the queue.
* The "error" should not matter for purposes of rate setting. */
struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
work.work);
struct ieee80211_tx_info *info;
struct ieee80211_hw *dev = priv->dev;
static u16 retry;
u16 tmp;
mutex_lock(&priv->conf_mutex);
tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA);
while (skb_queue_len(&priv->b_tx_status.queue) > 0) {
struct sk_buff *old_skb;
old_skb = skb_dequeue(&priv->b_tx_status.queue);
info = IEEE80211_SKB_CB(old_skb);
info->status.rates[0].count = tmp - retry + 1;
ieee80211_tx_status_irqsafe(dev, old_skb);
}
retry = tmp;
mutex_unlock(&priv->conf_mutex);
}
static int rtl8187_start(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
@ -869,6 +902,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
mutex_lock(&priv->conf_mutex);
init_usb_anchor(&priv->anchored);
priv->dev = dev;
if (priv->is_rtl8187b) {
reg = RTL818X_RX_CONF_MGMT |
@ -936,6 +970,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
reg |= RTL818X_CMD_TX_ENABLE;
reg |= RTL818X_CMD_RX_ENABLE;
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
INIT_DELAYED_WORK(&priv->work, rtl8187_work);
mutex_unlock(&priv->conf_mutex);
return 0;
@ -966,6 +1001,8 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
dev_kfree_skb_any(skb);
usb_kill_anchored_urbs(&priv->anchored);
if (!priv->is_rtl8187b)
cancel_delayed_work_sync(&priv->work);
mutex_unlock(&priv->conf_mutex);
}