2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 10:13:57 +08:00

ARM: at91: add support for Telit EVK-PRO3 with Telit GE863-PRO3

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This commit is contained in:
Fabio Porcedda 2012-06-27 11:08:19 +02:00 committed by Nicolas Ferre
parent bd0a521e88
commit 2e8e4711fe
3 changed files with 94 additions and 0 deletions

View File

@ -0,0 +1,41 @@
/*
* evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
*
* Copyright (C) 2012 Telit,
* 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "ge863-pro3.dtsi"
/ {
model = "Telit EVK-PRO3 for Telit GE863-PRO3";
compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9";
ahb {
apb {
macb0: ethernet@fffc4000 {
phy-mode = "rmii";
status = "okay";
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>;
status = "okay";
};
};
usb0: ohci@00500000 {
num-ports = <2>;
status = "okay";
};
};
i2c@0 {
status = "okay";
};
};

View File

@ -0,0 +1,52 @@
/*
* ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
*
* Copyright (C) 2012 Telit,
* 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
*
* Licensed under GPLv2 or later.
*/
/include/ "at91sam9260.dtsi"
/ {
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <6000000>;
};
};
ahb {
apb {
dbgu: serial@fffff200 {
status = "okay";
};
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
status = "okay";
boot@0 {
label = "boot";
reg = <0x0 0x7c0000>;
};
root@07c0000 {
label = "root";
reg = <0x7c0000 0x7840000>;
};
};
};
chosen {
bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
};
};

View File

@ -16,6 +16,7 @@ endif
# Keep dtb files sorted alphabetically for each SoC
# sam9260
dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
# sam9263