mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-19 18:53:52 +08:00
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits) bridge: fix a possible net_device leak net: Documentation: RFC 2553bis is now RFC 3493 atm: br2684: Fix oops due to skb->dev being NULL ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONS net: netdev-features.txt update to Documentation/networking/00-INDEX vlan: reset headers on accel emulation path forcedeth: call vlan_mode only if hw supports vlans via-velocity: remove non-tagged packet filtering bonding:reset backup and inactive flag of slave net_sched: fix port mirror/redirect stats reporting sit tunnels: propagate IPv6 transport class to IPv4 Type of Service gianfar: reduce stack usage in gianfar_ethtool.c net: minor update to Documentation/networking/scaling.txt net: add missing entries to Documentation/networking/00-INDEX gianfar: prevent buggy hw rx vlan tagging net: sh_eth: Fix build by forgot including linux/interrupt.h drivers/net/can/sja1000/plx_pci.c: eliminate double free usbnet/cdc_ncm: Don't use stack variables for DMA vmxnet3: Don't enable vlan filters in promiscuous mode. iwlagn: sysfs couldn't find the priv pointer ...
This commit is contained in:
Linus Torvalds
commit
2da2c664ec
@ -1,13 +1,21 @@
|
||||
00-INDEX
|
||||
- this file
|
||||
3c359.txt
|
||||
- information on the 3Com TokenLink Velocity XL (3c5359) driver.
|
||||
3c505.txt
|
||||
- information on the 3Com EtherLink Plus (3c505) driver.
|
||||
3c509.txt
|
||||
- information on the 3Com Etherlink III Series Ethernet cards.
|
||||
6pack.txt
|
||||
- info on the 6pack protocol, an alternative to KISS for AX.25
|
||||
DLINK.txt
|
||||
- info on the D-Link DE-600/DE-620 parallel port pocket adapters
|
||||
PLIP.txt
|
||||
- PLIP: The Parallel Line Internet Protocol device driver
|
||||
README.ipw2100
|
||||
- README for the Intel PRO/Wireless 2100 driver.
|
||||
README.ipw2200
|
||||
- README for the Intel PRO/Wireless 2915ABG and 2200BG driver.
|
||||
README.sb1000
|
||||
- info on General Instrument/NextLevel SURFboard1000 cable modem.
|
||||
alias.txt
|
||||
@ -20,8 +28,12 @@ atm.txt
|
||||
- info on where to get ATM programs and support for Linux.
|
||||
ax25.txt
|
||||
- info on using AX.25 and NET/ROM code for Linux
|
||||
batman-adv.txt
|
||||
- B.A.T.M.A.N routing protocol on top of layer 2 Ethernet Frames.
|
||||
baycom.txt
|
||||
- info on the driver for Baycom style amateur radio modems
|
||||
bonding.txt
|
||||
- Linux Ethernet Bonding Driver HOWTO: link aggregation in Linux.
|
||||
bridge.txt
|
||||
- where to get user space programs for ethernet bridging with Linux.
|
||||
can.txt
|
||||
@ -34,32 +46,60 @@ cxacru.txt
|
||||
- Conexant AccessRunner USB ADSL Modem
|
||||
cxacru-cf.py
|
||||
- Conexant AccessRunner USB ADSL Modem configuration file parser
|
||||
cxgb.txt
|
||||
- Release Notes for the Chelsio N210 Linux device driver.
|
||||
dccp.txt
|
||||
- the Datagram Congestion Control Protocol (DCCP) (RFC 4340..42).
|
||||
de4x5.txt
|
||||
- the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver
|
||||
decnet.txt
|
||||
- info on using the DECnet networking layer in Linux.
|
||||
depca.txt
|
||||
- the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver
|
||||
dl2k.txt
|
||||
- README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko).
|
||||
dm9000.txt
|
||||
- README for the Simtec DM9000 Network driver.
|
||||
dmfe.txt
|
||||
- info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
|
||||
dns_resolver.txt
|
||||
- The DNS resolver module allows kernel servies to make DNS queries.
|
||||
driver.txt
|
||||
- Softnet driver issues.
|
||||
e100.txt
|
||||
- info on Intel's EtherExpress PRO/100 line of 10/100 boards
|
||||
e1000.txt
|
||||
- info on Intel's E1000 line of gigabit ethernet boards
|
||||
e1000e.txt
|
||||
- README for the Intel Gigabit Ethernet Driver (e1000e).
|
||||
eql.txt
|
||||
- serial IP load balancing
|
||||
ewrk3.txt
|
||||
- the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
|
||||
fib_trie.txt
|
||||
- Level Compressed Trie (LC-trie) notes: a structure for routing.
|
||||
filter.txt
|
||||
- Linux Socket Filtering
|
||||
fore200e.txt
|
||||
- FORE Systems PCA-200E/SBA-200E ATM NIC driver info.
|
||||
framerelay.txt
|
||||
- info on using Frame Relay/Data Link Connection Identifier (DLCI).
|
||||
gen_stats.txt
|
||||
- Generic networking statistics for netlink users.
|
||||
generic_hdlc.txt
|
||||
- The generic High Level Data Link Control (HDLC) layer.
|
||||
generic_netlink.txt
|
||||
- info on Generic Netlink
|
||||
gianfar.txt
|
||||
- Gianfar Ethernet Driver.
|
||||
ieee802154.txt
|
||||
- Linux IEEE 802.15.4 implementation, API and drivers
|
||||
ifenslave.c
|
||||
- Configure network interfaces for parallel routing (bonding).
|
||||
igb.txt
|
||||
- README for the Intel Gigabit Ethernet Driver (igb).
|
||||
igbvf.txt
|
||||
- README for the Intel Gigabit Ethernet Driver (igbvf).
|
||||
ip-sysctl.txt
|
||||
- /proc/sys/net/ipv4/* variables
|
||||
ip_dynaddr.txt
|
||||
@ -68,41 +108,117 @@ ipddp.txt
|
||||
- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
|
||||
iphase.txt
|
||||
- Interphase PCI ATM (i)Chip IA Linux driver info.
|
||||
ipv6.txt
|
||||
- Options to the ipv6 kernel module.
|
||||
ipvs-sysctl.txt
|
||||
- Per-inode explanation of the /proc/sys/net/ipv4/vs interface.
|
||||
irda.txt
|
||||
- where to get IrDA (infrared) utilities and info for Linux.
|
||||
ixgb.txt
|
||||
- README for the Intel 10 Gigabit Ethernet Driver (ixgb).
|
||||
ixgbe.txt
|
||||
- README for the Intel 10 Gigabit Ethernet Driver (ixgbe).
|
||||
ixgbevf.txt
|
||||
- README for the Intel Virtual Function (VF) Driver (ixgbevf).
|
||||
l2tp.txt
|
||||
- User guide to the L2TP tunnel protocol.
|
||||
lapb-module.txt
|
||||
- programming information of the LAPB module.
|
||||
ltpc.txt
|
||||
- the Apple or Farallon LocalTalk PC card driver
|
||||
mac80211-injection.txt
|
||||
- HOWTO use packet injection with mac80211
|
||||
multicast.txt
|
||||
- Behaviour of cards under Multicast
|
||||
multiqueue.txt
|
||||
- HOWTO for multiqueue network device support.
|
||||
netconsole.txt
|
||||
- The network console module netconsole.ko: configuration and notes.
|
||||
netdev-features.txt
|
||||
- Network interface features API description.
|
||||
netdevices.txt
|
||||
- info on network device driver functions exported to the kernel.
|
||||
netif-msg.txt
|
||||
- Design of the network interface message level setting (NETIF_MSG_*).
|
||||
nfc.txt
|
||||
- The Linux Near Field Communication (NFS) subsystem.
|
||||
olympic.txt
|
||||
- IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info.
|
||||
operstates.txt
|
||||
- Overview of network interface operational states.
|
||||
packet_mmap.txt
|
||||
- User guide to memory mapped packet socket rings (PACKET_[RT]X_RING).
|
||||
phonet.txt
|
||||
- The Phonet packet protocol used in Nokia cellular modems.
|
||||
phy.txt
|
||||
- The PHY abstraction layer.
|
||||
pktgen.txt
|
||||
- User guide to the kernel packet generator (pktgen.ko).
|
||||
policy-routing.txt
|
||||
- IP policy-based routing
|
||||
ppp_generic.txt
|
||||
- Information about the generic PPP driver.
|
||||
proc_net_tcp.txt
|
||||
- Per inode overview of the /proc/net/tcp and /proc/net/tcp6 interfaces.
|
||||
radiotap-headers.txt
|
||||
- Background on radiotap headers.
|
||||
ray_cs.txt
|
||||
- Raylink Wireless LAN card driver info.
|
||||
rds.txt
|
||||
- Background on the reliable, ordered datagram delivery method RDS.
|
||||
regulatory.txt
|
||||
- Overview of the Linux wireless regulatory infrastructure.
|
||||
rxrpc.txt
|
||||
- Guide to the RxRPC protocol.
|
||||
s2io.txt
|
||||
- Release notes for Neterion Xframe I/II 10GbE driver.
|
||||
scaling.txt
|
||||
- Explanation of network scaling techniques: RSS, RPS, RFS, aRFS, XPS.
|
||||
sctp.txt
|
||||
- Notes on the Linux kernel implementation of the SCTP protocol.
|
||||
secid.txt
|
||||
- Explanation of the secid member in flow structures.
|
||||
skfp.txt
|
||||
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
|
||||
smc9.txt
|
||||
- the driver for SMC's 9000 series of Ethernet cards
|
||||
smctr.txt
|
||||
- SMC TokenCard TokenRing Linux driver info.
|
||||
spider-net.txt
|
||||
- README for the Spidernet Driver (as found in PS3 / Cell BE).
|
||||
stmmac.txt
|
||||
- README for the STMicro Synopsys Ethernet driver.
|
||||
tc-actions-env-rules.txt
|
||||
- rules for traffic control (tc) actions.
|
||||
timestamping.txt
|
||||
- overview of network packet timestamping variants.
|
||||
tcp.txt
|
||||
- short blurb on how TCP output takes place.
|
||||
tcp-thin.txt
|
||||
- kernel tuning options for low rate 'thin' TCP streams.
|
||||
tlan.txt
|
||||
- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
|
||||
tms380tr.txt
|
||||
- SysKonnect Token Ring ISA/PCI adapter driver info.
|
||||
tproxy.txt
|
||||
- Transparent proxy support user guide.
|
||||
tuntap.txt
|
||||
- TUN/TAP device driver, allowing user space Rx/Tx of packets.
|
||||
udplite.txt
|
||||
- UDP-Lite protocol (RFC 3828) introduction.
|
||||
vortex.txt
|
||||
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
|
||||
vxge.txt
|
||||
- README for the Neterion X3100 PCIe Server Adapter.
|
||||
x25.txt
|
||||
- general info on X.25 development.
|
||||
x25-iface.txt
|
||||
- description of the X.25 Packet Layer to LAPB device interface.
|
||||
xfrm_proc.txt
|
||||
- description of the statistics package for XFRM.
|
||||
xfrm_sync.txt
|
||||
- sync patches for XFRM enable migration of an SA between hosts.
|
||||
xfrm_sysctl.txt
|
||||
- description of the XFRM configuration options.
|
||||
z8530drv.txt
|
||||
- info about Linux driver for Z8530 based HDLC cards for AX.25
|
||||
|
||||
@ -992,7 +992,7 @@ bindv6only - BOOLEAN
|
||||
TRUE: disable IPv4-mapped address feature
|
||||
FALSE: enable IPv4-mapped address feature
|
||||
|
||||
Default: FALSE (as specified in RFC2553bis)
|
||||
Default: FALSE (as specified in RFC3493)
|
||||
|
||||
IPv6 Fragmentation:
|
||||
|
||||
|
||||
@ -52,7 +52,8 @@ module parameter for specifying the number of hardware queues to
|
||||
configure. In the bnx2x driver, for instance, this parameter is called
|
||||
num_queues. A typical RSS configuration would be to have one receive queue
|
||||
for each CPU if the device supports enough queues, or otherwise at least
|
||||
one for each cache domain at a particular cache level (L1, L2, etc.).
|
||||
one for each memory domain, where a memory domain is a set of CPUs that
|
||||
share a particular memory level (L1, L2, NUMA node, etc.).
|
||||
|
||||
The indirection table of an RSS device, which resolves a queue by masked
|
||||
hash, is usually programmed by the driver at initialization. The
|
||||
@ -82,11 +83,17 @@ RSS should be enabled when latency is a concern or whenever receive
|
||||
interrupt processing forms a bottleneck. Spreading load between CPUs
|
||||
decreases queue length. For low latency networking, the optimal setting
|
||||
is to allocate as many queues as there are CPUs in the system (or the
|
||||
NIC maximum, if lower). Because the aggregate number of interrupts grows
|
||||
with each additional queue, the most efficient high-rate configuration
|
||||
NIC maximum, if lower). The most efficient high-rate configuration
|
||||
is likely the one with the smallest number of receive queues where no
|
||||
CPU that processes receive interrupts reaches 100% utilization. Per-cpu
|
||||
load can be observed using the mpstat utility.
|
||||
receive queue overflows due to a saturated CPU, because in default
|
||||
mode with interrupt coalescing enabled, the aggregate number of
|
||||
interrupts (and thus work) grows with each additional queue.
|
||||
|
||||
Per-cpu load can be observed using the mpstat utility, but note that on
|
||||
processors with hyperthreading (HT), each hyperthread is represented as
|
||||
a separate CPU. For interrupt handling, HT has shown no benefit in
|
||||
initial tests, so limit the number of queues to the number of CPU cores
|
||||
in the system.
|
||||
|
||||
|
||||
RPS: Receive Packet Steering
|
||||
@ -145,7 +152,7 @@ the bitmap.
|
||||
== Suggested Configuration
|
||||
|
||||
For a single queue device, a typical RPS configuration would be to set
|
||||
the rps_cpus to the CPUs in the same cache domain of the interrupting
|
||||
the rps_cpus to the CPUs in the same memory domain of the interrupting
|
||||
CPU. If NUMA locality is not an issue, this could also be all CPUs in
|
||||
the system. At high interrupt rate, it might be wise to exclude the
|
||||
interrupting CPU from the map since that already performs much work.
|
||||
@ -154,7 +161,7 @@ For a multi-queue system, if RSS is configured so that a hardware
|
||||
receive queue is mapped to each CPU, then RPS is probably redundant
|
||||
and unnecessary. If there are fewer hardware queues than CPUs, then
|
||||
RPS might be beneficial if the rps_cpus for each queue are the ones that
|
||||
share the same cache domain as the interrupting CPU for that queue.
|
||||
share the same memory domain as the interrupting CPU for that queue.
|
||||
|
||||
|
||||
RFS: Receive Flow Steering
|
||||
@ -326,7 +333,7 @@ The queue chosen for transmitting a particular flow is saved in the
|
||||
corresponding socket structure for the flow (e.g. a TCP connection).
|
||||
This transmit queue is used for subsequent packets sent on the flow to
|
||||
prevent out of order (ooo) packets. The choice also amortizes the cost
|
||||
of calling get_xps_queues() over all packets in the connection. To avoid
|
||||
of calling get_xps_queues() over all packets in the flow. To avoid
|
||||
ooo packets, the queue for a flow can subsequently only be changed if
|
||||
skb->ooo_okay is set for a packet in the flow. This flag indicates that
|
||||
there are no outstanding packets in the flow, so the transmit queue can
|
||||
|
||||
@ -3419,9 +3419,27 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count)
|
||||
static int bond_open(struct net_device *bond_dev)
|
||||
{
|
||||
struct bonding *bond = netdev_priv(bond_dev);
|
||||
struct slave *slave;
|
||||
int i;
|
||||
|
||||
bond->kill_timers = 0;
|
||||
|
||||
/* reset slave->backup and slave->inactive */
|
||||
read_lock(&bond->lock);
|
||||
if (bond->slave_cnt > 0) {
|
||||
read_lock(&bond->curr_slave_lock);
|
||||
bond_for_each_slave(bond, slave, i) {
|
||||
if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP)
|
||||
&& (slave != bond->curr_active_slave)) {
|
||||
bond_set_slave_inactive_flags(slave);
|
||||
} else {
|
||||
bond_set_slave_active_flags(slave);
|
||||
}
|
||||
}
|
||||
read_unlock(&bond->curr_slave_lock);
|
||||
}
|
||||
read_unlock(&bond->lock);
|
||||
|
||||
INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed);
|
||||
|
||||
if (bond_is_lb(bond)) {
|
||||
|
||||
@ -408,7 +408,7 @@ static void plx_pci_del_card(struct pci_dev *pdev)
|
||||
struct sja1000_priv *priv;
|
||||
int i = 0;
|
||||
|
||||
for (i = 0; i < card->channels; i++) {
|
||||
for (i = 0; i < PLX_PCI_MAX_CHAN; i++) {
|
||||
dev = card->net_dev[i];
|
||||
if (!dev)
|
||||
continue;
|
||||
@ -536,7 +536,6 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev,
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "Registering device failed "
|
||||
"(err=%d)\n", err);
|
||||
free_sja1000dev(dev);
|
||||
goto failure_cleanup;
|
||||
}
|
||||
|
||||
@ -549,6 +548,7 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev,
|
||||
dev_err(&pdev->dev, "Channel #%d not detected\n",
|
||||
i + 1);
|
||||
free_sja1000dev(dev);
|
||||
card->net_dev[i] = NULL;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -155,6 +155,9 @@ struct e1000_info;
|
||||
#define HV_M_STATUS_SPEED_1000 0x0200
|
||||
#define HV_M_STATUS_LINK_UP 0x0040
|
||||
|
||||
#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */
|
||||
#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000
|
||||
|
||||
/* Time to wait before putting the device into D3 if there's no link (in ms). */
|
||||
#define LINK_TIMEOUT 100
|
||||
|
||||
@ -454,6 +457,7 @@ struct e1000_info {
|
||||
#define FLAG2_DISABLE_AIM (1 << 8)
|
||||
#define FLAG2_CHECK_PHY_HANG (1 << 9)
|
||||
#define FLAG2_NO_DISABLE_RX (1 << 10)
|
||||
#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11)
|
||||
|
||||
#define E1000_RX_DESC_PS(R, i) \
|
||||
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
|
||||
|
||||
@ -137,8 +137,9 @@
|
||||
#define HV_PM_CTRL PHY_REG(770, 17)
|
||||
|
||||
/* PHY Low Power Idle Control */
|
||||
#define I82579_LPI_CTRL PHY_REG(772, 20)
|
||||
#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
|
||||
#define I82579_LPI_CTRL PHY_REG(772, 20)
|
||||
#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
|
||||
#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
|
||||
|
||||
/* EMI Registers */
|
||||
#define I82579_EMI_ADDR 0x10
|
||||
@ -163,6 +164,11 @@
|
||||
#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
|
||||
#define HV_KMRN_MDIO_SLOW 0x0400
|
||||
|
||||
/* KMRN FIFO Control and Status */
|
||||
#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16)
|
||||
#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000
|
||||
#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12
|
||||
|
||||
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
|
||||
/* Offset 04h HSFSTS */
|
||||
union ich8_hws_flash_status {
|
||||
@ -657,6 +663,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
|
||||
struct e1000_mac_info *mac = &hw->mac;
|
||||
s32 ret_val;
|
||||
bool link;
|
||||
u16 phy_reg;
|
||||
|
||||
/*
|
||||
* We only want to go out to the PHY registers to see if Auto-Neg
|
||||
@ -689,16 +696,35 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
|
||||
|
||||
mac->get_link_status = false;
|
||||
|
||||
if (hw->phy.type == e1000_phy_82578) {
|
||||
ret_val = e1000_link_stall_workaround_hv(hw);
|
||||
if (ret_val)
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (hw->mac.type == e1000_pch2lan) {
|
||||
switch (hw->mac.type) {
|
||||
case e1000_pch2lan:
|
||||
ret_val = e1000_k1_workaround_lv(hw);
|
||||
if (ret_val)
|
||||
goto out;
|
||||
/* fall-thru */
|
||||
case e1000_pchlan:
|
||||
if (hw->phy.type == e1000_phy_82578) {
|
||||
ret_val = e1000_link_stall_workaround_hv(hw);
|
||||
if (ret_val)
|
||||
goto out;
|
||||
}
|
||||
|
||||
/*
|
||||
* Workaround for PCHx parts in half-duplex:
|
||||
* Set the number of preambles removed from the packet
|
||||
* when it is passed from the PHY to the MAC to prevent
|
||||
* the MAC from misinterpreting the packet type.
|
||||
*/
|
||||
e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg);
|
||||
phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK;
|
||||
|
||||
if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD)
|
||||
phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT);
|
||||
|
||||
e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
/*
|
||||
@ -788,6 +814,11 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
|
||||
(adapter->hw.phy.type == e1000_phy_igp_3))
|
||||
adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
|
||||
|
||||
/* Enable workaround for 82579 w/ ME enabled */
|
||||
if ((adapter->hw.mac.type == e1000_pch2lan) &&
|
||||
(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
|
||||
adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
|
||||
|
||||
/* Disable EEE by default until IEEE802.3az spec is finalized */
|
||||
if (adapter->flags2 & FLAG2_HAS_EEE)
|
||||
adapter->hw.dev_spec.ich8lan.eee_disable = true;
|
||||
@ -1355,7 +1386,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
|
||||
return ret_val;
|
||||
|
||||
/* Preamble tuning for SSC */
|
||||
ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204);
|
||||
ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204);
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
}
|
||||
@ -1645,6 +1676,7 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
|
||||
s32 ret_val = 0;
|
||||
u16 status_reg = 0;
|
||||
u32 mac_reg;
|
||||
u16 phy_reg;
|
||||
|
||||
if (hw->mac.type != e1000_pch2lan)
|
||||
goto out;
|
||||
@ -1659,12 +1691,19 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
|
||||
mac_reg = er32(FEXTNVM4);
|
||||
mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
|
||||
|
||||
if (status_reg & HV_M_STATUS_SPEED_1000)
|
||||
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
|
||||
else
|
||||
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
|
||||
ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
|
||||
if (ret_val)
|
||||
goto out;
|
||||
|
||||
if (status_reg & HV_M_STATUS_SPEED_1000) {
|
||||
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
|
||||
phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
|
||||
} else {
|
||||
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
|
||||
phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
|
||||
}
|
||||
ew32(FEXTNVM4, mac_reg);
|
||||
ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
|
||||
}
|
||||
|
||||
out:
|
||||
|
||||
@ -518,6 +518,63 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
|
||||
adapter->hw_csum_good++;
|
||||
}
|
||||
|
||||
/**
|
||||
* e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa()
|
||||
* @hw: pointer to the HW structure
|
||||
* @tail: address of tail descriptor register
|
||||
* @i: value to write to tail descriptor register
|
||||
*
|
||||
* When updating the tail register, the ME could be accessing Host CSR
|
||||
* registers at the same time. Normally, this is handled in h/w by an
|
||||
* arbiter but on some parts there is a bug that acknowledges Host accesses
|
||||
* later than it should which could result in the descriptor register to
|
||||
* have an incorrect value. Workaround this by checking the FWSM register
|
||||
* which has bit 24 set while ME is accessing Host CSR registers, wait
|
||||
* if it is set and try again a number of times.
|
||||
**/
|
||||
static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail,
|
||||
unsigned int i)
|
||||
{
|
||||
unsigned int j = 0;
|
||||
|
||||
while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) &&
|
||||
(er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI))
|
||||
udelay(50);
|
||||
|
||||
writel(i, tail);
|
||||
|
||||
if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail)))
|
||||
return E1000_ERR_SWFW_SYNC;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i)
|
||||
{
|
||||
u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail);
|
||||
struct e1000_hw *hw = &adapter->hw;
|
||||
|
||||
if (e1000e_update_tail_wa(hw, tail, i)) {
|
||||
u32 rctl = er32(RCTL);
|
||||
ew32(RCTL, rctl & ~E1000_RCTL_EN);
|
||||
e_err("ME firmware caused invalid RDT - resetting\n");
|
||||
schedule_work(&adapter->reset_task);
|
||||
}
|
||||
}
|
||||
|
||||
static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i)
|
||||
{
|
||||
u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail);
|
||||
struct e1000_hw *hw = &adapter->hw;
|
||||
|
||||
if (e1000e_update_tail_wa(hw, tail, i)) {
|
||||
u32 tctl = er32(TCTL);
|
||||
ew32(TCTL, tctl & ~E1000_TCTL_EN);
|
||||
e_err("ME firmware caused invalid TDT - resetting\n");
|
||||
schedule_work(&adapter->reset_task);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
|
||||
* @adapter: address of board private structure
|
||||
@ -573,7 +630,10 @@ map_skb:
|
||||
* such as IA-64).
|
||||
*/
|
||||
wmb();
|
||||
writel(i, adapter->hw.hw_addr + rx_ring->tail);
|
||||
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
|
||||
e1000e_update_rdt_wa(adapter, i);
|
||||
else
|
||||
writel(i, adapter->hw.hw_addr + rx_ring->tail);
|
||||
}
|
||||
i++;
|
||||
if (i == rx_ring->count)
|
||||
@ -673,7 +733,11 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
|
||||
* such as IA-64).
|
||||
*/
|
||||
wmb();
|
||||
writel(i << 1, adapter->hw.hw_addr + rx_ring->tail);
|
||||
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
|
||||
e1000e_update_rdt_wa(adapter, i << 1);
|
||||
else
|
||||
writel(i << 1,
|
||||
adapter->hw.hw_addr + rx_ring->tail);
|
||||
}
|
||||
|
||||
i++;
|
||||
@ -756,7 +820,10 @@ check_page:
|
||||
* applicable for weak-ordered memory model archs,
|
||||
* such as IA-64). */
|
||||
wmb();
|
||||
writel(i, adapter->hw.hw_addr + rx_ring->tail);
|
||||
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
|
||||
e1000e_update_rdt_wa(adapter, i);
|
||||
else
|
||||
writel(i, adapter->hw.hw_addr + rx_ring->tail);
|
||||
}
|
||||
}
|
||||
|
||||
@ -4689,7 +4756,12 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
|
||||
wmb();
|
||||
|
||||
tx_ring->next_to_use = i;
|
||||
writel(i, adapter->hw.hw_addr + tx_ring->tail);
|
||||
|
||||
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
|
||||
e1000e_update_tdt_wa(adapter, i);
|
||||
else
|
||||
writel(i, adapter->hw.hw_addr + tx_ring->tail);
|
||||
|
||||
/*
|
||||
* we need this if more than one processor can write to our tail
|
||||
* at a time, it synchronizes IO on IA64/Altix systems
|
||||
|
||||
@ -5615,7 +5615,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
|
||||
goto out_error;
|
||||
}
|
||||
|
||||
nv_vlan_mode(dev, dev->features);
|
||||
if (id->driver_data & DEV_HAS_VLAN)
|
||||
nv_vlan_mode(dev, dev->features);
|
||||
|
||||
netif_carrier_off(dev);
|
||||
|
||||
|
||||
@ -2710,8 +2710,13 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
|
||||
/* Tell the skb what kind of packet this is */
|
||||
skb->protocol = eth_type_trans(skb, dev);
|
||||
|
||||
/* Set vlan tag */
|
||||
if (fcb->flags & RXFCB_VLN)
|
||||
/*
|
||||
* There's need to check for NETIF_F_HW_VLAN_RX here.
|
||||
* Even if vlan rx accel is disabled, on some chips
|
||||
* RXFCB_VLN is pseudo randomly set.
|
||||
*/
|
||||
if (dev->features & NETIF_F_HW_VLAN_RX &&
|
||||
fcb->flags & RXFCB_VLN)
|
||||
__vlan_hwaccel_put_tag(skb, fcb->vlctl);
|
||||
|
||||
/* Send the packet up the stack */
|
||||
|
||||
@ -686,10 +686,21 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
|
||||
{
|
||||
unsigned int last_rule_idx = priv->cur_filer_idx;
|
||||
unsigned int cmp_rqfpr;
|
||||
unsigned int local_rqfpr[MAX_FILER_IDX + 1];
|
||||
unsigned int local_rqfcr[MAX_FILER_IDX + 1];
|
||||
unsigned int *local_rqfpr;
|
||||
unsigned int *local_rqfcr;
|
||||
int i = 0x0, k = 0x0;
|
||||
int j = MAX_FILER_IDX, l = 0x0;
|
||||
int ret = 1;
|
||||
|
||||
local_rqfpr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1),
|
||||
GFP_KERNEL);
|
||||
local_rqfcr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1),
|
||||
GFP_KERNEL);
|
||||
if (!local_rqfpr || !local_rqfcr) {
|
||||
pr_err("Out of memory\n");
|
||||
ret = 0;
|
||||
goto err;
|
||||
}
|
||||
|
||||
switch (class) {
|
||||
case TCP_V4_FLOW:
|
||||
@ -706,7 +717,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
|
||||
break;
|
||||
default:
|
||||
pr_err("Right now this class is not supported\n");
|
||||
return 0;
|
||||
ret = 0;
|
||||
goto err;
|
||||
}
|
||||
|
||||
for (i = 0; i < MAX_FILER_IDX + 1; i++) {
|
||||
@ -721,7 +733,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
|
||||
|
||||
if (i == MAX_FILER_IDX + 1) {
|
||||
pr_err("No parse rule found, can't create hash rules\n");
|
||||
return 0;
|
||||
ret = 0;
|
||||
goto err;
|
||||
}
|
||||
|
||||
/* If a match was found, then it begins the starting of a cluster rule
|
||||
@ -765,7 +778,10 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
|
||||
priv->cur_filer_idx = priv->cur_filer_idx - 1;
|
||||
}
|
||||
|
||||
return 1;
|
||||
err:
|
||||
kfree(local_rqfcr);
|
||||
kfree(local_rqfpr);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd)
|
||||
|
||||
@ -1459,8 +1459,10 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
|
||||
if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
|
||||
ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb,
|
||||
staterr);
|
||||
if (!ddp_bytes)
|
||||
if (!ddp_bytes) {
|
||||
dev_kfree_skb_any(skb);
|
||||
goto next_desc;
|
||||
}
|
||||
}
|
||||
#endif /* IXGBE_FCOE */
|
||||
ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
|
||||
|
||||
@ -21,6 +21,7 @@
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/etherdevice.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
@ -228,23 +228,40 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
|
||||
if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) {
|
||||
|
||||
if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) {
|
||||
struct usb_cdc_ncm_ndp_input_size ndp_in_sz;
|
||||
err = usb_control_msg(ctx->udev,
|
||||
usb_sndctrlpipe(ctx->udev, 0),
|
||||
USB_CDC_SET_NTB_INPUT_SIZE,
|
||||
USB_TYPE_CLASS | USB_DIR_OUT
|
||||
| USB_RECIP_INTERFACE,
|
||||
0, iface_no, &ndp_in_sz, 8, 1000);
|
||||
} else {
|
||||
__le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
|
||||
err = usb_control_msg(ctx->udev,
|
||||
usb_sndctrlpipe(ctx->udev, 0),
|
||||
USB_CDC_SET_NTB_INPUT_SIZE,
|
||||
USB_TYPE_CLASS | USB_DIR_OUT
|
||||
| USB_RECIP_INTERFACE,
|
||||
0, iface_no, &dwNtbInMaxSize, 4, 1000);
|
||||
}
|
||||
struct usb_cdc_ncm_ndp_input_size *ndp_in_sz;
|
||||
|
||||
ndp_in_sz = kzalloc(sizeof(*ndp_in_sz), GFP_KERNEL);
|
||||
if (!ndp_in_sz) {
|
||||
err = -ENOMEM;
|
||||
goto size_err;
|
||||
}
|
||||
|
||||
err = usb_control_msg(ctx->udev,
|
||||
usb_sndctrlpipe(ctx->udev, 0),
|
||||
USB_CDC_SET_NTB_INPUT_SIZE,
|
||||
USB_TYPE_CLASS | USB_DIR_OUT
|
||||
| USB_RECIP_INTERFACE,
|
||||
0, iface_no, ndp_in_sz, 8, 1000);
|
||||
kfree(ndp_in_sz);
|
||||
} else {
|
||||
__le32 *dwNtbInMaxSize;
|
||||
dwNtbInMaxSize = kzalloc(sizeof(*dwNtbInMaxSize),
|
||||
GFP_KERNEL);
|
||||
if (!dwNtbInMaxSize) {
|
||||
err = -ENOMEM;
|
||||
goto size_err;
|
||||
}
|
||||
*dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
|
||||
|
||||
err = usb_control_msg(ctx->udev,
|
||||
usb_sndctrlpipe(ctx->udev, 0),
|
||||
USB_CDC_SET_NTB_INPUT_SIZE,
|
||||
USB_TYPE_CLASS | USB_DIR_OUT
|
||||
| USB_RECIP_INTERFACE,
|
||||
0, iface_no, dwNtbInMaxSize, 4, 1000);
|
||||
kfree(dwNtbInMaxSize);
|
||||
}
|
||||
size_err:
|
||||
if (err < 0)
|
||||
pr_debug("Setting NTB Input Size failed\n");
|
||||
}
|
||||
@ -325,19 +342,29 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
|
||||
|
||||
/* set Max Datagram Size (MTU) */
|
||||
if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) {
|
||||
__le16 max_datagram_size;
|
||||
__le16 *max_datagram_size;
|
||||
u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
|
||||
|
||||
max_datagram_size = kzalloc(sizeof(*max_datagram_size),
|
||||
GFP_KERNEL);
|
||||
if (!max_datagram_size) {
|
||||
err = -ENOMEM;
|
||||
goto max_dgram_err;
|
||||
}
|
||||
|
||||
err = usb_control_msg(ctx->udev, usb_rcvctrlpipe(ctx->udev, 0),
|
||||
USB_CDC_GET_MAX_DATAGRAM_SIZE,
|
||||
USB_TYPE_CLASS | USB_DIR_IN
|
||||
| USB_RECIP_INTERFACE,
|
||||
0, iface_no, &max_datagram_size,
|
||||
0, iface_no, max_datagram_size,
|
||||
2, 1000);
|
||||
if (err < 0) {
|
||||
pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n",
|
||||
CDC_NCM_MIN_DATAGRAM_SIZE);
|
||||
kfree(max_datagram_size);
|
||||
} else {
|
||||
ctx->max_datagram_size = le16_to_cpu(max_datagram_size);
|
||||
ctx->max_datagram_size =
|
||||
le16_to_cpu(*max_datagram_size);
|
||||
/* Check Eth descriptor value */
|
||||
if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) {
|
||||
if (ctx->max_datagram_size > eth_max_sz)
|
||||
@ -360,8 +387,10 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
|
||||
USB_TYPE_CLASS | USB_DIR_OUT
|
||||
| USB_RECIP_INTERFACE,
|
||||
0,
|
||||
iface_no, &max_datagram_size,
|
||||
iface_no, max_datagram_size,
|
||||
2, 1000);
|
||||
kfree(max_datagram_size);
|
||||
max_dgram_err:
|
||||
if (err < 0)
|
||||
pr_debug("SET_MAX_DATAGRAM_SIZE failed\n");
|
||||
}
|
||||
|
||||
@ -515,10 +515,6 @@ static void velocity_init_cam_filter(struct velocity_info *vptr)
|
||||
mac_set_cam_mask(regs, vptr->mCAMmask);
|
||||
|
||||
/* Enable VCAMs */
|
||||
|
||||
if (test_bit(0, vptr->active_vlans))
|
||||
WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
|
||||
|
||||
for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) {
|
||||
mac_set_vlan_cam(regs, i, (u8 *) &vid);
|
||||
vptr->vCAMmask[i / 8] |= 0x1 << (i % 8);
|
||||
|
||||
@ -1929,14 +1929,17 @@ static void
|
||||
vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
|
||||
{
|
||||
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
|
||||
u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
|
||||
unsigned long flags;
|
||||
|
||||
VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
|
||||
spin_lock_irqsave(&adapter->cmd_lock, flags);
|
||||
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
|
||||
VMXNET3_CMD_UPDATE_VLAN_FILTERS);
|
||||
spin_unlock_irqrestore(&adapter->cmd_lock, flags);
|
||||
if (!(netdev->flags & IFF_PROMISC)) {
|
||||
u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
|
||||
unsigned long flags;
|
||||
|
||||
VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
|
||||
spin_lock_irqsave(&adapter->cmd_lock, flags);
|
||||
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
|
||||
VMXNET3_CMD_UPDATE_VLAN_FILTERS);
|
||||
spin_unlock_irqrestore(&adapter->cmd_lock, flags);
|
||||
}
|
||||
|
||||
set_bit(vid, adapter->active_vlans);
|
||||
}
|
||||
@ -1946,14 +1949,17 @@ static void
|
||||
vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
|
||||
{
|
||||
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
|
||||
u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
|
||||
unsigned long flags;
|
||||
|
||||
VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid);
|
||||
spin_lock_irqsave(&adapter->cmd_lock, flags);
|
||||
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
|
||||
VMXNET3_CMD_UPDATE_VLAN_FILTERS);
|
||||
spin_unlock_irqrestore(&adapter->cmd_lock, flags);
|
||||
if (!(netdev->flags & IFF_PROMISC)) {
|
||||
u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
|
||||
unsigned long flags;
|
||||
|
||||
VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid);
|
||||
spin_lock_irqsave(&adapter->cmd_lock, flags);
|
||||
VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
|
||||
VMXNET3_CMD_UPDATE_VLAN_FILTERS);
|
||||
spin_unlock_irqrestore(&adapter->cmd_lock, flags);
|
||||
}
|
||||
|
||||
clear_bit(vid, adapter->active_vlans);
|
||||
}
|
||||
|
||||
@ -478,27 +478,22 @@ out_no_pci:
|
||||
return err;
|
||||
}
|
||||
|
||||
static void iwl_pci_down(struct iwl_bus *bus)
|
||||
{
|
||||
struct iwl_pci_bus *pci_bus = (struct iwl_pci_bus *) bus->bus_specific;
|
||||
|
||||
pci_disable_msi(pci_bus->pci_dev);
|
||||
pci_iounmap(pci_bus->pci_dev, pci_bus->hw_base);
|
||||
pci_release_regions(pci_bus->pci_dev);
|
||||
pci_disable_device(pci_bus->pci_dev);
|
||||
pci_set_drvdata(pci_bus->pci_dev, NULL);
|
||||
|
||||
kfree(bus);
|
||||
}
|
||||
|
||||
static void __devexit iwl_pci_remove(struct pci_dev *pdev)
|
||||
{
|
||||
struct iwl_priv *priv = pci_get_drvdata(pdev);
|
||||
void *bus_specific = priv->bus->bus_specific;
|
||||
struct iwl_bus *bus = priv->bus;
|
||||
struct iwl_pci_bus *pci_bus = IWL_BUS_GET_PCI_BUS(bus);
|
||||
struct pci_dev *pci_dev = IWL_BUS_GET_PCI_DEV(bus);
|
||||
|
||||
iwl_remove(priv);
|
||||
|
||||
iwl_pci_down(bus_specific);
|
||||
pci_disable_msi(pci_dev);
|
||||
pci_iounmap(pci_dev, pci_bus->hw_base);
|
||||
pci_release_regions(pci_dev);
|
||||
pci_disable_device(pci_dev);
|
||||
pci_set_drvdata(pci_dev, NULL);
|
||||
|
||||
kfree(bus);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
|
||||
@ -464,6 +464,15 @@ static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
|
||||
int wcid, ack, pid;
|
||||
int tx_wcid, tx_ack, tx_pid;
|
||||
|
||||
if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
|
||||
!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) {
|
||||
WARNING(entry->queue->rt2x00dev,
|
||||
"Data pending for entry %u in queue %u\n",
|
||||
entry->entry_idx, entry->queue->qid);
|
||||
cond_resched();
|
||||
return false;
|
||||
}
|
||||
|
||||
wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
|
||||
ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
|
||||
pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
|
||||
@ -529,12 +538,11 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
|
||||
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
|
||||
if (rt2800usb_txdone_entry_check(entry, reg))
|
||||
break;
|
||||
entry = NULL;
|
||||
}
|
||||
|
||||
if (!entry || rt2x00queue_empty(queue))
|
||||
break;
|
||||
|
||||
rt2800_txdone_entry(entry, reg);
|
||||
if (entry)
|
||||
rt2800_txdone_entry(entry, reg);
|
||||
}
|
||||
}
|
||||
|
||||
@ -558,8 +566,10 @@ static void rt2800usb_work_txdone(struct work_struct *work)
|
||||
while (!rt2x00queue_empty(queue)) {
|
||||
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
|
||||
|
||||
if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
|
||||
if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
|
||||
!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
|
||||
break;
|
||||
|
||||
if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
|
||||
rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
|
||||
else if (rt2x00queue_status_timeout(entry))
|
||||
|
||||
@ -262,23 +262,20 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
|
||||
struct queue_entry *entry = (struct queue_entry *)urb->context;
|
||||
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
|
||||
|
||||
if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
|
||||
if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
|
||||
return;
|
||||
|
||||
if (rt2x00dev->ops->lib->tx_dma_done)
|
||||
rt2x00dev->ops->lib->tx_dma_done(entry);
|
||||
|
||||
/*
|
||||
* Report the frame as DMA done
|
||||
*/
|
||||
rt2x00lib_dmadone(entry);
|
||||
|
||||
/*
|
||||
* Check if the frame was correctly uploaded
|
||||
*/
|
||||
if (urb->status)
|
||||
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
|
||||
/*
|
||||
* Report the frame as DMA done
|
||||
*/
|
||||
rt2x00lib_dmadone(entry);
|
||||
|
||||
if (rt2x00dev->ops->lib->tx_dma_done)
|
||||
rt2x00dev->ops->lib->tx_dma_done(entry);
|
||||
/*
|
||||
* Schedule the delayed work for reading the TX status
|
||||
* from the device.
|
||||
|
||||
@ -77,8 +77,6 @@ int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth)
|
||||
auth->sleep_auth = sleep_auth;
|
||||
|
||||
ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
out:
|
||||
kfree(auth);
|
||||
@ -624,10 +622,8 @@ int wl1271_acx_cca_threshold(struct wl1271 *wl)
|
||||
|
||||
ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD,
|
||||
detection, sizeof(*detection));
|
||||
if (ret < 0) {
|
||||
if (ret < 0)
|
||||
wl1271_warning("failed to set cca threshold: %d", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
out:
|
||||
kfree(detection);
|
||||
|
||||
@ -139,12 +139,15 @@ static int wl1271_tm_cmd_interrogate(struct wl1271 *wl, struct nlattr *tb[])
|
||||
|
||||
if (ret < 0) {
|
||||
wl1271_warning("testmode cmd interrogate failed: %d", ret);
|
||||
kfree(cmd);
|
||||
return ret;
|
||||
}
|
||||
|
||||
skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, sizeof(*cmd));
|
||||
if (!skb)
|
||||
if (!skb) {
|
||||
kfree(cmd);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
NLA_PUT(skb, WL1271_TM_ATTR_DATA, sizeof(*cmd), cmd);
|
||||
|
||||
|
||||
@ -167,6 +167,8 @@ struct sk_buff *vlan_untag(struct sk_buff *skb)
|
||||
if (unlikely(!skb))
|
||||
goto err_free;
|
||||
|
||||
skb_reset_network_header(skb);
|
||||
skb_reset_transport_header(skb);
|
||||
return skb;
|
||||
|
||||
err_free:
|
||||
|
||||
@ -558,12 +558,13 @@ static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg)
|
||||
spin_unlock_irqrestore(&rq->lock, flags);
|
||||
|
||||
skb_queue_walk_safe(&queue, skb, tmp) {
|
||||
struct net_device *dev = skb->dev;
|
||||
struct net_device *dev;
|
||||
|
||||
br2684_push(atmvcc, skb);
|
||||
dev = skb->dev;
|
||||
|
||||
dev->stats.rx_bytes -= skb->len;
|
||||
dev->stats.rx_packets--;
|
||||
|
||||
br2684_push(atmvcc, skb);
|
||||
}
|
||||
|
||||
/* initialize netdev carrier state */
|
||||
|
||||
@ -231,6 +231,7 @@ static struct net_bridge_port *new_nbp(struct net_bridge *br,
|
||||
int br_add_bridge(struct net *net, const char *name)
|
||||
{
|
||||
struct net_device *dev;
|
||||
int res;
|
||||
|
||||
dev = alloc_netdev(sizeof(struct net_bridge), name,
|
||||
br_dev_setup);
|
||||
@ -240,7 +241,10 @@ int br_add_bridge(struct net *net, const char *name)
|
||||
|
||||
dev_net_set(dev, net);
|
||||
|
||||
return register_netdev(dev);
|
||||
res = register_netdev(dev);
|
||||
if (res)
|
||||
free_netdev(dev);
|
||||
return res;
|
||||
}
|
||||
|
||||
int br_del_bridge(struct net *net, const char *name)
|
||||
|
||||
@ -913,7 +913,7 @@ static int ipv6_getsockopt_sticky(struct sock *sk, struct ipv6_txoptions *opt,
|
||||
}
|
||||
|
||||
static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
|
||||
char __user *optval, int __user *optlen)
|
||||
char __user *optval, int __user *optlen, unsigned flags)
|
||||
{
|
||||
struct ipv6_pinfo *np = inet6_sk(sk);
|
||||
int len;
|
||||
@ -962,7 +962,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
|
||||
|
||||
msg.msg_control = optval;
|
||||
msg.msg_controllen = len;
|
||||
msg.msg_flags = 0;
|
||||
msg.msg_flags = flags;
|
||||
|
||||
lock_sock(sk);
|
||||
skb = np->pktoptions;
|
||||
@ -1222,7 +1222,7 @@ int ipv6_getsockopt(struct sock *sk, int level, int optname,
|
||||
if(level != SOL_IPV6)
|
||||
return -ENOPROTOOPT;
|
||||
|
||||
err = do_ipv6_getsockopt(sk, level, optname, optval, optlen);
|
||||
err = do_ipv6_getsockopt(sk, level, optname, optval, optlen, 0);
|
||||
#ifdef CONFIG_NETFILTER
|
||||
/* we need to exclude all possible ENOPROTOOPTs except default case */
|
||||
if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) {
|
||||
@ -1264,7 +1264,8 @@ int compat_ipv6_getsockopt(struct sock *sk, int level, int optname,
|
||||
return compat_mc_getsockopt(sk, level, optname, optval, optlen,
|
||||
ipv6_getsockopt);
|
||||
|
||||
err = do_ipv6_getsockopt(sk, level, optname, optval, optlen);
|
||||
err = do_ipv6_getsockopt(sk, level, optname, optval, optlen,
|
||||
MSG_CMSG_COMPAT);
|
||||
#ifdef CONFIG_NETFILTER
|
||||
/* we need to exclude all possible ENOPROTOOPTs except default case */
|
||||
if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) {
|
||||
|
||||
@ -672,6 +672,9 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
|
||||
if (skb->protocol != htons(ETH_P_IPV6))
|
||||
goto tx_error;
|
||||
|
||||
if (tos == 1)
|
||||
tos = ipv6_get_dsfield(iph6);
|
||||
|
||||
/* ISATAP (RFC4214) - must come before 6to4 */
|
||||
if (dev->priv_flags & IFF_ISATAP) {
|
||||
struct neighbour *neigh = NULL;
|
||||
|
||||
@ -196,8 +196,7 @@ static int tcf_mirred(struct sk_buff *skb, const struct tc_action *a,
|
||||
|
||||
skb2->skb_iif = skb->dev->ifindex;
|
||||
skb2->dev = dev;
|
||||
dev_queue_xmit(skb2);
|
||||
err = 0;
|
||||
err = dev_queue_xmit(skb2);
|
||||
|
||||
out:
|
||||
if (err) {
|
||||
|
||||
Loading…
Reference in New Issue
Block a user