renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-16 09:13:55 +08:00
Code

powerpc/fsl_msi: add support for "msi-address-64" property

Browse Source 
Add support for the msi-address-64 property of a PCI node.  This property
specifies the PCI address of MSIIR (message signaled interrupt index
register).

In commit 3da34aae ("powerpc/fsl: Support unique MSI addresses per PCIe Root
Complex"), the msi_addr_hi/msi_addr_lo fields of struct fsl_msi were redefined
from an actual address to just an offset, but the fields were not renamed
accordingly.  These fields are replace with a single field, msiir_offset,
to reflect the new meaning.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Timur Tabi 2011-09-23 12:41:35 -05:00 committed by Kumar Gala
parent 4511680613
commit 2bcd1c0cfc
3 changed files with 57 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

42
Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
View File

@ -25,6 +25,16 @@ Required properties:
are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
to MPIC.
Optional properties:
- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
is used for MSI messaging. The address of MSIIR in PCI address space is
the MSI message address.
This property may be used in virtualized environments where the hypervisor
has created an alternate mapping for the MSIR block. See below for an
explanation.
Example:
msi@41600 {
compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
@ -41,3 +51,35 @@ Example:
0xe7 0>;
interrupt-parent = <&mpic>;
};
The Freescale hypervisor and msi-address-64
-------------------------------------------
Normally, PCI devices have access to all of CCSR via an ATMU mapping. The
Freescale MSI driver calculates the address of MSIIR (in the MSI register
block) and sets that address as the MSI message address.
In a virtualized environment, the hypervisor may need to create an IOMMU
mapping for MSIIR. The Freescale ePAPR hypervisor has this requirement
because of hardware limitations of the Peripheral Access Management Unit
(PAMU), which is currently the only IOMMU that the hypervisor supports.
The ATMU is programmed with the guest physical address, and the PAMU
intercepts transactions and reroutes them to the true physical address.
In the PAMU, each PCI controller is given only one primary window. The
PAMU restricts DMA operations so that they can only occur within a window.
Because PCI devices must be able to DMA to memory, the primary window must
be used to cover all of the guest's memory space.
PAMU primary windows can be divided into 256 subwindows, and each
subwindow can have its own address mapping ("guest physical" to "true
physical"). However, each subwindow has to have the same alignment, which
means they cannot be located at just any address. Because of these
restrictions, it is usually impossible to create a 4KB subwindow that
covers MSIIR where it's normally located.
Therefore, the hypervisor has to create a subwindow inside the same
primary window used for memory, but mapped to the MSIR block (where MSIIR
lives). The first subwindow after the end of guest memory is used for
this. The address specified in the msi-address-64 property is the PCI
address of MSIIR. The hypervisor configures the PAMU to map that address to
the true physical address of MSIIR.

20
arch/powerpc/sysdev/fsl_msi.c
View File

@ -30,7 +30,7 @@ LIST_HEAD(msi_head);
struct fsl_msi_feature {
u32 fsl_pic_ip;
u32 msiir_offset;
u32 msiir_offset; /* Offset of MSIIR, relative to start of MSIR bank */
};
struct fsl_msi_cascade_data {
@ -126,10 +126,19 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
{
struct fsl_msi *msi_data = fsl_msi_data;
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
u64 base = fsl_pci_immrbar_base(hose);
u64 address; /* Physical address of the MSIIR */
int len;
const u64 *reg;
msg->address_lo = msi_data->msi_addr_lo + lower_32_bits(base);
msg->address_hi = msi_data->msi_addr_hi + upper_32_bits(base);
/* If the msi-address-64 property exists, then use it */
reg = of_get_property(hose->dn, "msi-address-64", &len);
if (reg && (len == sizeof(u64)))
address = be64_to_cpup(reg);
else
address = fsl_pci_immrbar_base(hose) + msi_data->msiir_offset;
msg->address_lo = lower_32_bits(address);
msg->address_hi = upper_32_bits(address);
msg->data = hwirq;
@ -359,8 +368,7 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev)
msi->irqhost->host_data = msi;
msi->msi_addr_hi = 0x0;
msi->msi_addr_lo = features->msiir_offset + (res.start & 0xfffff);
msi->msiir_offset = features->msiir_offset + (res.start & 0xfffff);
rc = fsl_msi_init_allocator(msi);
if (rc) {

3
arch/powerpc/sysdev/fsl_msi.h
View File

@ -28,8 +28,7 @@ struct fsl_msi {
unsigned long cascade_irq;
u32 msi_addr_lo;
u32 msi_addr_hi;
u32 msiir_offset; /* Offset of MSIIR, relative to start of CCSR */
void __iomem *msi_regs;
u32 feature;
int msi_virqs[NR_MSI_REG];