From c6180deb1da5d087341fb5a3c1a15e61492dcd6b Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Tue, 18 Apr 2006 21:14:22 -0700 Subject: [PATCH 001/160] [IA64] wire up compat_sys_adjtimex() Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/ia32/ia32_entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index 95fe04400f6b..a32cd59b81ed 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -334,7 +334,7 @@ ia32_syscall_table: data8 sys_setdomainname data8 sys32_newuname data8 sys32_modify_ldt - data8 sys_ni_syscall /* adjtimex */ + data8 compat_sys_adjtimex data8 sys32_mprotect /* 125 */ data8 compat_sys_sigprocmask data8 sys_ni_syscall /* create_module */ From cbf283c048798ada7e062892b21de85fb5727243 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 20 Apr 2006 10:11:09 -0700 Subject: [PATCH 002/160] [IA64] Remove redundant NULL checks before kfree Signed-off-by: Jesper Juhl Signed-off-by: Tony Luck --- arch/ia64/kernel/topology.c | 7 ++----- arch/ia64/sn/kernel/xpc_partition.c | 8 ++------ 2 files changed, 4 insertions(+), 11 deletions(-) diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index b47476d655f1..e9b628ba64e5 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -305,13 +305,10 @@ static struct kobj_type cache_ktype_percpu_entry = { static void __cpuinit cpu_cache_sysfs_exit(unsigned int cpu) { - if (all_cpu_cache_info[cpu].cache_leaves) { - kfree(all_cpu_cache_info[cpu].cache_leaves); - all_cpu_cache_info[cpu].cache_leaves = NULL; - } + kfree(all_cpu_cache_info[cpu].cache_leaves); + all_cpu_cache_info[cpu].cache_leaves = NULL; all_cpu_cache_info[cpu].num_cache_leaves = 0; memset(&all_cpu_cache_info[cpu].kobj, 0, sizeof(struct kobject)); - return; } diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 94211429fd0c..2a89cfce4954 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -136,9 +136,7 @@ xpc_get_rsvd_page_pa(int nasid) } if (L1_CACHE_ALIGN(len) > buf_len) { - if (buf_base != NULL) { - kfree(buf_base); - } + kfree(buf_base); buf_len = L1_CACHE_ALIGN(len); buf = (u64) xpc_kmalloc_cacheline_aligned(buf_len, GFP_KERNEL, &buf_base); @@ -159,9 +157,7 @@ xpc_get_rsvd_page_pa(int nasid) } } - if (buf_base != NULL) { - kfree(buf_base); - } + kfree(buf_base); if (status != SALRET_OK) { rp_pa = 0; From 308a878210cde6ab19df9f392c24db53ad6f56bf Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Tue, 18 Apr 2006 11:26:34 -0500 Subject: [PATCH 003/160] [IA64] Remove unused variable in sn_sal.h cnodeid was being set but not used. The dead code was left over from a previous version that grabbed a per node lock. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck --- include/asm-ia64/sn/sn_sal.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h index bf4cc867a698..7ddce80e1918 100644 --- a/include/asm-ia64/sn/sn_sal.h +++ b/include/asm-ia64/sn/sn_sal.h @@ -8,7 +8,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (c) 2000-2006 Silicon Graphics, Inc. All rights reserved. */ @@ -705,10 +705,8 @@ static inline int sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array) { struct ia64_sal_retval ret_stuff; - int cnodeid; unsigned long irq_flags; - cnodeid = nasid_to_cnodeid(get_node_number(paddr)); local_irq_save(irq_flags); ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len, (u64)nasid_array, perms, 0, 0, 0); From 0d9adec525b87d8ab7e64efeabffb5b3f293056e Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 18 Apr 2006 15:00:45 -0500 Subject: [PATCH 004/160] [IA64] - Fix MAX_PXM_DOMAINS for systems with > 256 nodes Correctly size the PXM-related arrays for systems that have more than 256 nodes. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- include/asm-ia64/acpi.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h index d734585a23cf..09a5dd0e44a8 100644 --- a/include/asm-ia64/acpi.h +++ b/include/asm-ia64/acpi.h @@ -110,9 +110,8 @@ extern void prefill_possible_map(void); extern int additional_cpus; #ifdef CONFIG_ACPI_NUMA -/* Proximity bitmap length; _PXM is at most 255 (8 bit)*/ -#ifdef CONFIG_IA64_NR_NODES -#define MAX_PXM_DOMAINS CONFIG_IA64_NR_NODES +#if MAX_NUMNODES > 256 +#define MAX_PXM_DOMAINS MAX_NUMNODES #else #define MAX_PXM_DOMAINS (256) #endif From fef6108d4556917c45cd9ba397c1c7597f3990e1 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Thu, 20 Apr 2006 16:44:29 -0500 Subject: [PATCH 005/160] [PATCH] Fix locking in gianfar This patch fixes several bugs in the gianfar driver, including a major one where spinlocks were horribly broken: * Split gianfar locks into two types: TX and RX * Made it so gfar_start() now clears RHALT * Fixed a bug where calling gfar_start_xmit() with interrupts off would corrupt the interrupt state * Fixed a bug where a frame could potentially arrive, and never be handled (if no more frames arrived * Fixed a bug where the rx_work_limit would never be observed by the rx completion code * Fixed a bug where the interrupt handlers were not actually protected by their spinlocks Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 56 ++++++++++++++--------------- drivers/net/gianfar.h | 67 ++++++++++++++++++++++++----------- drivers/net/gianfar_ethtool.c | 20 +++++++---- drivers/net/gianfar_sysfs.c | 24 ++++++------- 4 files changed, 100 insertions(+), 67 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 771e25d8c417..218d31764c52 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -210,7 +210,8 @@ static int gfar_probe(struct platform_device *pdev) goto regs_fail; } - spin_lock_init(&priv->lock); + spin_lock_init(&priv->txlock); + spin_lock_init(&priv->rxlock); platform_set_drvdata(pdev, dev); @@ -515,11 +516,13 @@ void stop_gfar(struct net_device *dev) phy_stop(priv->phydev); /* Lock it down */ - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->txlock, flags); + spin_lock(&priv->rxlock); gfar_halt(dev); - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock(&priv->rxlock); + spin_unlock_irqrestore(&priv->txlock, flags); /* Free the IRQs */ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { @@ -605,14 +608,15 @@ void gfar_start(struct net_device *dev) tempval |= DMACTRL_INIT_SETTINGS; gfar_write(&priv->regs->dmactrl, tempval); - /* Clear THLT, so that the DMA starts polling now */ - gfar_write(®s->tstat, TSTAT_CLEAR_THALT); - /* Make sure we aren't stopped */ tempval = gfar_read(&priv->regs->dmactrl); tempval &= ~(DMACTRL_GRS | DMACTRL_GTS); gfar_write(&priv->regs->dmactrl, tempval); + /* Clear THLT/RHLT, so that the DMA starts polling now */ + gfar_write(®s->tstat, TSTAT_CLEAR_THALT); + gfar_write(®s->rstat, RSTAT_CLEAR_RHALT); + /* Unmask the interrupts we look for */ gfar_write(®s->imask, IMASK_DEFAULT); } @@ -928,12 +932,13 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) struct txfcb *fcb = NULL; struct txbd8 *txbdp; u16 status; + unsigned long flags; /* Update transmit stats */ priv->stats.tx_bytes += skb->len; /* Lock priv now */ - spin_lock_irq(&priv->lock); + spin_lock_irqsave(&priv->txlock, flags); /* Point at the first free tx descriptor */ txbdp = priv->cur_tx; @@ -1004,7 +1009,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT); /* Unlock priv */ - spin_unlock_irq(&priv->lock); + spin_unlock_irqrestore(&priv->txlock, flags); return 0; } @@ -1049,7 +1054,7 @@ static void gfar_vlan_rx_register(struct net_device *dev, unsigned long flags; u32 tempval; - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->rxlock, flags); priv->vlgrp = grp; @@ -1076,7 +1081,7 @@ static void gfar_vlan_rx_register(struct net_device *dev, gfar_write(&priv->regs->rctrl, tempval); } - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->rxlock, flags); } @@ -1085,12 +1090,12 @@ static void gfar_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid) struct gfar_private *priv = netdev_priv(dev); unsigned long flags; - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->rxlock, flags); if (priv->vlgrp) priv->vlgrp->vlan_devices[vid] = NULL; - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->rxlock, flags); } @@ -1179,7 +1184,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs) gfar_write(&priv->regs->ievent, IEVENT_TX_MASK); /* Lock priv */ - spin_lock(&priv->lock); + spin_lock(&priv->txlock); bdp = priv->dirty_tx; while ((bdp->status & TXBD_READY) == 0) { /* If dirty_tx and cur_tx are the same, then either the */ @@ -1224,7 +1229,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs) else gfar_write(&priv->regs->txic, 0); - spin_unlock(&priv->lock); + spin_unlock(&priv->txlock); return IRQ_HANDLED; } @@ -1305,9 +1310,10 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs) { struct net_device *dev = (struct net_device *) dev_id; struct gfar_private *priv = netdev_priv(dev); - #ifdef CONFIG_GFAR_NAPI u32 tempval; +#else + unsigned long flags; #endif /* Clear IEVENT, so rx interrupt isn't called again @@ -1330,7 +1336,7 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs) } #else - spin_lock(&priv->lock); + spin_lock_irqsave(&priv->rxlock, flags); gfar_clean_rx_ring(dev, priv->rx_ring_size); /* If we are coalescing interrupts, update the timer */ @@ -1341,7 +1347,7 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs) else gfar_write(&priv->regs->rxic, 0); - spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->rxlock, flags); #endif return IRQ_HANDLED; @@ -1490,13 +1496,6 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) /* Update the current rxbd pointer to be the next one */ priv->cur_rx = bdp; - /* If no packets have arrived since the - * last one we processed, clear the IEVENT RX and - * BSY bits so that another interrupt won't be - * generated when we set IMASK */ - if (bdp->status & RXBD_EMPTY) - gfar_write(&priv->regs->ievent, IEVENT_RX_MASK); - return howmany; } @@ -1516,7 +1515,7 @@ static int gfar_poll(struct net_device *dev, int *budget) rx_work_limit -= howmany; *budget -= howmany; - if (rx_work_limit >= 0) { + if (rx_work_limit > 0) { netif_rx_complete(dev); /* Clear the halt bit in RSTAT */ @@ -1533,7 +1532,8 @@ static int gfar_poll(struct net_device *dev, int *budget) gfar_write(&priv->regs->rxic, 0); } - return (rx_work_limit < 0) ? 1 : 0; + /* Return 1 if there's more work to do */ + return (rx_work_limit > 0) ? 0 : 1; } #endif @@ -1629,7 +1629,7 @@ static void adjust_link(struct net_device *dev) struct phy_device *phydev = priv->phydev; int new_state = 0; - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->txlock, flags); if (phydev->link) { u32 tempval = gfar_read(®s->maccfg2); u32 ecntrl = gfar_read(®s->ecntrl); @@ -1694,7 +1694,7 @@ static void adjust_link(struct net_device *dev) if (new_state && netif_msg_link(priv)) phy_print_status(phydev); - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->txlock, flags); } /* Update the hash table based on the current list of multicast diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index d37d5401be6e..127c98cf3336 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -656,43 +656,62 @@ struct gfar { * the buffer descriptor determines the actual condition. */ struct gfar_private { - /* pointers to arrays of skbuffs for tx and rx */ + /* Fields controlled by TX lock */ + spinlock_t txlock; + + /* Pointer to the array of skbuffs */ struct sk_buff ** tx_skbuff; - struct sk_buff ** rx_skbuff; - /* indices pointing to the next free sbk in skb arrays */ + /* next free skb in the array */ u16 skb_curtx; - u16 skb_currx; - /* index of the first skb which hasn't been transmitted - * yet. */ + /* First skb in line to be transmitted */ u16 skb_dirtytx; /* Configuration info for the coalescing features */ unsigned char txcoalescing; unsigned short txcount; unsigned short txtime; + + /* Buffer descriptor pointers */ + struct txbd8 *tx_bd_base; /* First tx buffer descriptor */ + struct txbd8 *cur_tx; /* Next free ring entry */ + struct txbd8 *dirty_tx; /* First buffer in line + to be transmitted */ + unsigned int tx_ring_size; + + /* RX Locked fields */ + spinlock_t rxlock; + + /* skb array and index */ + struct sk_buff ** rx_skbuff; + u16 skb_currx; + + /* RX Coalescing values */ unsigned char rxcoalescing; unsigned short rxcount; unsigned short rxtime; - /* GFAR addresses */ - struct rxbd8 *rx_bd_base; /* Base addresses of Rx and Tx Buffers */ - struct txbd8 *tx_bd_base; + struct rxbd8 *rx_bd_base; /* First Rx buffers */ struct rxbd8 *cur_rx; /* Next free rx ring entry */ - struct txbd8 *cur_tx; /* Next free ring entry */ - struct txbd8 *dirty_tx; /* The Ring entry to be freed. */ - struct gfar __iomem *regs; /* Pointer to the GFAR memory mapped Registers */ - u32 __iomem *hash_regs[16]; - int hash_width; - struct net_device_stats stats; /* linux network statistics */ - struct gfar_extra_stats extra_stats; - spinlock_t lock; + + /* RX parameters */ + unsigned int rx_ring_size; unsigned int rx_buffer_size; unsigned int rx_stash_size; unsigned int rx_stash_index; - unsigned int tx_ring_size; - unsigned int rx_ring_size; + + struct vlan_group *vlgrp; + + /* Unprotected fields */ + /* Pointer to the GFAR memory mapped Registers */ + struct gfar __iomem *regs; + + /* Hash registers and their width */ + u32 __iomem *hash_regs[16]; + int hash_width; + + /* global parameters */ unsigned int fifo_threshold; unsigned int fifo_starve; unsigned int fifo_starve_off; @@ -702,13 +721,15 @@ struct gfar_private { extended_hash:1, bd_stash_en:1; unsigned short padding; - struct vlan_group *vlgrp; - /* Info structure initialized by board setup code */ + unsigned int interruptTransmit; unsigned int interruptReceive; unsigned int interruptError; + + /* info structure initialized by platform code */ struct gianfar_platform_data *einfo; + /* PHY stuff */ struct phy_device *phydev; struct mii_bus *mii_bus; int oldspeed; @@ -716,6 +737,10 @@ struct gfar_private { int oldlink; uint32_t msg_enable; + + /* Network Statistics */ + struct net_device_stats stats; + struct gfar_extra_stats extra_stats; }; static inline u32 gfar_read(volatile unsigned __iomem *addr) diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index 5de7b2e259dc..d69698c695ef 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -455,10 +455,14 @@ static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rva /* Halt TX and RX, and process the frames which * have already been received */ - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->txlock, flags); + spin_lock(&priv->rxlock); + gfar_halt(dev); gfar_clean_rx_ring(dev, priv->rx_ring_size); - spin_unlock_irqrestore(&priv->lock, flags); + + spin_unlock(&priv->rxlock); + spin_unlock_irqrestore(&priv->txlock, flags); /* Now we take down the rings to rebuild them */ stop_gfar(dev); @@ -488,10 +492,14 @@ static int gfar_set_rx_csum(struct net_device *dev, uint32_t data) /* Halt TX and RX, and process the frames which * have already been received */ - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->txlock, flags); + spin_lock(&priv->rxlock); + gfar_halt(dev); gfar_clean_rx_ring(dev, priv->rx_ring_size); - spin_unlock_irqrestore(&priv->lock, flags); + + spin_unlock(&priv->rxlock); + spin_unlock_irqrestore(&priv->txlock, flags); /* Now we take down the rings to rebuild them */ stop_gfar(dev); @@ -523,7 +531,7 @@ static int gfar_set_tx_csum(struct net_device *dev, uint32_t data) if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) return -EOPNOTSUPP; - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->txlock, flags); gfar_halt(dev); if (data) @@ -532,7 +540,7 @@ static int gfar_set_tx_csum(struct net_device *dev, uint32_t data) dev->features &= ~NETIF_F_IP_CSUM; gfar_start(dev); - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->txlock, flags); return 0; } diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c index 51ef181b1368..a6d5c43199cb 100644 --- a/drivers/net/gianfar_sysfs.c +++ b/drivers/net/gianfar_sysfs.c @@ -82,7 +82,7 @@ static ssize_t gfar_set_bd_stash(struct class_device *cdev, else return count; - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->rxlock, flags); /* Set the new stashing value */ priv->bd_stash_en = new_setting; @@ -96,7 +96,7 @@ static ssize_t gfar_set_bd_stash(struct class_device *cdev, gfar_write(&priv->regs->attr, temp); - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->rxlock, flags); return count; } @@ -118,7 +118,7 @@ static ssize_t gfar_set_rx_stash_size(struct class_device *cdev, u32 temp; unsigned long flags; - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->rxlock, flags); if (length > priv->rx_buffer_size) return count; @@ -142,7 +142,7 @@ static ssize_t gfar_set_rx_stash_size(struct class_device *cdev, gfar_write(&priv->regs->attr, temp); - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->rxlock, flags); return count; } @@ -166,7 +166,7 @@ static ssize_t gfar_set_rx_stash_index(struct class_device *cdev, u32 temp; unsigned long flags; - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->rxlock, flags); if (index > priv->rx_stash_size) return count; @@ -180,7 +180,7 @@ static ssize_t gfar_set_rx_stash_index(struct class_device *cdev, temp |= ATTRELI_EI(index); gfar_write(&priv->regs->attreli, flags); - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->rxlock, flags); return count; } @@ -205,7 +205,7 @@ static ssize_t gfar_set_fifo_threshold(struct class_device *cdev, if (length > GFAR_MAX_FIFO_THRESHOLD) return count; - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->txlock, flags); priv->fifo_threshold = length; @@ -214,7 +214,7 @@ static ssize_t gfar_set_fifo_threshold(struct class_device *cdev, temp |= length; gfar_write(&priv->regs->fifo_tx_thr, temp); - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->txlock, flags); return count; } @@ -240,7 +240,7 @@ static ssize_t gfar_set_fifo_starve(struct class_device *cdev, if (num > GFAR_MAX_FIFO_STARVE) return count; - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->txlock, flags); priv->fifo_starve = num; @@ -249,7 +249,7 @@ static ssize_t gfar_set_fifo_starve(struct class_device *cdev, temp |= num; gfar_write(&priv->regs->fifo_tx_starve, temp); - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->txlock, flags); return count; } @@ -274,7 +274,7 @@ static ssize_t gfar_set_fifo_starve_off(struct class_device *cdev, if (num > GFAR_MAX_FIFO_STARVE_OFF) return count; - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irqsave(&priv->txlock, flags); priv->fifo_starve_off = num; @@ -283,7 +283,7 @@ static ssize_t gfar_set_fifo_starve_off(struct class_device *cdev, temp |= num; gfar_write(&priv->regs->fifo_tx_starve_shutoff, temp); - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->txlock, flags); return count; } From 86db2f4239e2556cd37b853c2307aa9d43041458 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Thu, 20 Apr 2006 17:05:43 -0700 Subject: [PATCH 006/160] [IA64-SGI] SN SAL call to inject memory errors The SGI Altix SAL provides an interface for modifying the ECC on memory to create memory errors. The SAL call can be used to inject memory errors for testing MCA recovery code. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck --- include/asm-ia64/sn/sn_sal.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h index 7ddce80e1918..51aca022cf39 100644 --- a/include/asm-ia64/sn/sn_sal.h +++ b/include/asm-ia64/sn/sn_sal.h @@ -85,6 +85,7 @@ #define SN_SAL_GET_PROM_FEATURE_SET 0x02000065 #define SN_SAL_SET_OS_FEATURE_SET 0x02000066 +#define SN_SAL_INJECT_ERROR 0x02000067 /* * Service-specific constants @@ -1138,4 +1139,16 @@ ia64_sn_set_os_feature(int feature) return rv.status; } +static inline int +sn_inject_error(u64 paddr, u64 *data, u64 *ecc) +{ + struct ia64_sal_retval ret_stuff; + unsigned long irq_flags; + + local_irq_save(irq_flags); + ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data, + (u64)ecc, 0, 0, 0, 0); + local_irq_restore(irq_flags); + return ret_stuff.status; +} #endif /* _ASM_IA64_SN_SN_SAL_H */ From ee6d4b6ef8df79893d6d4a653b16c99bdb6d2784 Mon Sep 17 00:00:00 2001 From: Satoru Takeuchi Date: Thu, 20 Apr 2006 18:49:41 +0900 Subject: [PATCH 007/160] [IA64] eliminate compile time warnings This is a trivial patch to remove following compile time warning: arch/ia64/ia32/../../../fs/binfmt_elf.c:508: warning: 'randomize_stack_top' defined but not used Signed-off-by: Satoru Takeuchi Signed-off-by: Tony Luck --- arch/ia64/ia32/binfmt_elf32.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c index 4e7a6a1ec6c7..da03c06744f1 100644 --- a/arch/ia64/ia32/binfmt_elf32.c +++ b/arch/ia64/ia32/binfmt_elf32.c @@ -35,6 +35,9 @@ extern void ia64_elf32_init (struct pt_regs *regs); static void elf32_set_personality (void); +static unsigned long __attribute ((unused)) +randomize_stack_top(unsigned long stack_top); + #define setup_arg_pages(bprm,tos,exec) ia32_setup_arg_pages(bprm,exec) #define elf_map elf32_map From a72391e42f0a13116995045b3d492d660f96697d Mon Sep 17 00:00:00 2001 From: Satoru Takeuchi Date: Thu, 20 Apr 2006 18:49:48 +0900 Subject: [PATCH 008/160] [IA64] eliminate compile time warnings This patch removes following compile time warnings: drivers/pci/pci-sysfs.c: In function `pci_read_legacy_io': drivers/pci/pci-sysfs.c:257: warning: implicit declaration of function `ia64_pci_legacy_read' drivers/pci/pci-sysfs.c: In function `pci_write_legacy_io': drivers/pci/pci-sysfs.c:280: warning: implicit declaration of function `ia64_pci_legacy_write' It also fixes wrong definition of ia64_pci_legacy_write (type of `bus' is not `pci_dev', but `pci_bus'). Signed-Off-By: Satoru Takeuchi Signed-off-by: Tony Luck --- arch/ia64/pci/pci.c | 3 +-- include/asm-ia64/machvec.h | 2 ++ 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 9ba32b2d96d0..ab829a22f8a4 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -31,7 +31,6 @@ #include #include - /* * Low-level SAL-based PCI configuration access functions. Note that SAL * calls are already serialized (via sal_lock), so we don't need another @@ -707,7 +706,7 @@ int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) * * Simply writes @size bytes of @val to @port. */ -int ia64_pci_legacy_write(struct pci_dev *bus, u16 port, u32 val, u8 size) +int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) { int ret = size; diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h index c3e4ed8a3e17..a9c995a86c21 100644 --- a/include/asm-ia64/machvec.h +++ b/include/asm-ia64/machvec.h @@ -347,9 +347,11 @@ extern ia64_mv_dma_supported swiotlb_dma_supported; #endif #ifndef platform_pci_legacy_read # define platform_pci_legacy_read ia64_pci_legacy_read +extern int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size); #endif #ifndef platform_pci_legacy_write # define platform_pci_legacy_write ia64_pci_legacy_write +extern int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size); #endif #ifndef platform_inb # define platform_inb __ia64_inb From e5ecc192dfc5e0b325dd8c99ce4c755714c9acbf Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 13 Apr 2006 18:23:53 -0700 Subject: [PATCH 009/160] [IA64] Setup an IA64 specific reclaim distance RECLAIM_DISTANCE is checked on bootup against the SLIT table distances. Zone reclaim is important for system that have higher latencies but not for systems that have multiple nodes on one motherboard and therefore low latencies. We found that on motherboard latencies are typically 1 to 1.4 of local memory access speed whereas multinode systems which benefit from zone reclaim have usually more than 1.5 times the latency of a local access. Set the reclaim distance for IA64 to 1.5 times. Signed-off-by: Christoph Lameter Signed-off-by: Tony Luck --- include/asm-ia64/topology.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h index 3ee19dfa46df..616b5ed2aa72 100644 --- a/include/asm-ia64/topology.h +++ b/include/asm-ia64/topology.h @@ -22,6 +22,11 @@ /* Nodes w/o CPUs are preferred for memory allocations, see build_zonelists */ #define PENALTY_FOR_NODE_WITH_CPUS 255 +/* + * Distance above which we begin to use zone reclaim + */ +#define RECLAIM_DISTANCE 15 + /* * Returns the number of the node containing CPU 'cpu' */ From c1311af12c7ca176a790a911a3fb6fed1f3bb387 Mon Sep 17 00:00:00 2001 From: Brent Casavant Date: Thu, 20 Apr 2006 15:38:16 -0500 Subject: [PATCH 010/160] [IA64] IOC4 config option ordering SERIAL_SGI_IOC4 and BLK_DEV_SGIIOC4 depend upon SGI_IOC4, and SERIAL_SGI_IOC3 depends upon SGI_IOC3. Currently the definitions are out of order in the config sequence. Fix by including drivers/sn/Kconfig immediately after SGI_SN, upon which SGI_IOC4 and SGI_IOC3 depend. Signed-off-by: Brent Casavant Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 2 ++ drivers/Kconfig | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 9f40eeff0b5c..0f3076a820c3 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -413,6 +413,8 @@ config IA64_PALINFO config SGI_SN def_bool y if (IA64_SGI_SN2 || IA64_GENERIC) +source "drivers/sn/Kconfig" + source "drivers/firmware/Kconfig" source "fs/Kconfig.binfmt" diff --git a/drivers/Kconfig b/drivers/Kconfig index 5c91d6afb117..aeb5ab2391e4 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -68,8 +68,6 @@ source "drivers/leds/Kconfig" source "drivers/infiniband/Kconfig" -source "drivers/sn/Kconfig" - source "drivers/edac/Kconfig" source "drivers/rtc/Kconfig" From 0bd4fa977f81c914eb8bada00284d0933825900e Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 21 Apr 2006 18:17:42 +0000 Subject: [PATCH 011/160] [CIFS] [CIFS] Do not take rename sem on most path based calls (during building of full path) to avoid hang rename/readdir hang Reported by Alan Tyson Signed-off-by: Steve French --- fs/cifs/dir.c | 4 ---- fs/cifs/fcntl.c | 2 -- fs/cifs/file.c | 2 -- fs/cifs/inode.c | 6 ------ fs/cifs/link.c | 6 ------ fs/cifs/readdir.c | 2 -- fs/cifs/xattr.c | 8 -------- 7 files changed, 30 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 1d0ca3eaaca5..3830dfeb31cf 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -139,9 +139,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, cifs_sb = CIFS_SB(inode->i_sb); pTcon = cifs_sb->tcon; - mutex_lock(&direntry->d_sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&direntry->d_sb->s_vfs_rename_mutex); if(full_path == NULL) { FreeXid(xid); return -ENOMEM; @@ -316,9 +314,7 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode, cifs_sb = CIFS_SB(inode->i_sb); pTcon = cifs_sb->tcon; - mutex_lock(&direntry->d_sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&direntry->d_sb->s_vfs_rename_mutex); if(full_path == NULL) rc = -ENOMEM; else if (pTcon->ses->capabilities & CAP_UNIX) { diff --git a/fs/cifs/fcntl.c b/fs/cifs/fcntl.c index ec4dfe9bf5ef..633a93811328 100644 --- a/fs/cifs/fcntl.c +++ b/fs/cifs/fcntl.c @@ -86,9 +86,7 @@ int cifs_dir_notify(struct file * file, unsigned long arg) cifs_sb = CIFS_SB(file->f_dentry->d_sb); pTcon = cifs_sb->tcon; - mutex_lock(&file->f_dentry->d_sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(file->f_dentry); - mutex_unlock(&file->f_dentry->d_sb->s_vfs_rename_mutex); if(full_path == NULL) { rc = -ENOMEM; diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 5c497c529772..1476725e6051 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -203,9 +203,7 @@ int cifs_open(struct inode *inode, struct file *file) } } - mutex_lock(&inode->i_sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(file->f_dentry); - mutex_unlock(&inode->i_sb->s_vfs_rename_mutex); if (full_path == NULL) { FreeXid(xid); return -ENOMEM; diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 957ddd1571c6..4093764ef461 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -722,9 +722,7 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode) cifs_sb = CIFS_SB(inode->i_sb); pTcon = cifs_sb->tcon; - mutex_lock(&inode->i_sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&inode->i_sb->s_vfs_rename_mutex); if (full_path == NULL) { FreeXid(xid); return -ENOMEM; @@ -807,9 +805,7 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry) cifs_sb = CIFS_SB(inode->i_sb); pTcon = cifs_sb->tcon; - mutex_lock(&inode->i_sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&inode->i_sb->s_vfs_rename_mutex); if (full_path == NULL) { FreeXid(xid); return -ENOMEM; @@ -1141,9 +1137,7 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) rc = 0; } - mutex_lock(&direntry->d_sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&direntry->d_sb->s_vfs_rename_mutex); if (full_path == NULL) { FreeXid(xid); return -ENOMEM; diff --git a/fs/cifs/link.c b/fs/cifs/link.c index 9562f5bba65c..2ec99f833142 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -48,10 +48,8 @@ cifs_hardlink(struct dentry *old_file, struct inode *inode, /* No need to check for cross device links since server will do that BB note DFS case in future though (when we may have to check) */ - mutex_lock(&inode->i_sb->s_vfs_rename_mutex); fromName = build_path_from_dentry(old_file); toName = build_path_from_dentry(direntry); - mutex_unlock(&inode->i_sb->s_vfs_rename_mutex); if((fromName == NULL) || (toName == NULL)) { rc = -ENOMEM; goto cifs_hl_exit; @@ -103,9 +101,7 @@ cifs_follow_link(struct dentry *direntry, struct nameidata *nd) xid = GetXid(); - mutex_lock(&direntry->d_sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&direntry->d_sb->s_vfs_rename_mutex); if (!full_path) goto out_no_free; @@ -164,9 +160,7 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname) cifs_sb = CIFS_SB(inode->i_sb); pTcon = cifs_sb->tcon; - mutex_lock(&inode->i_sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&inode->i_sb->s_vfs_rename_mutex); if(full_path == NULL) { FreeXid(xid); diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 2f6e2825571e..7b8591acc5ad 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -404,9 +404,7 @@ static int initiate_cifs_search(const int xid, struct file *file) if(pTcon == NULL) return -EINVAL; - mutex_lock(&file->f_dentry->d_sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(file->f_dentry); - mutex_unlock(&file->f_dentry->d_sb->s_vfs_rename_mutex); if(full_path == NULL) { return -ENOMEM; diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c index 3938444d87b2..7754d641775e 100644 --- a/fs/cifs/xattr.c +++ b/fs/cifs/xattr.c @@ -62,9 +62,7 @@ int cifs_removexattr(struct dentry * direntry, const char * ea_name) cifs_sb = CIFS_SB(sb); pTcon = cifs_sb->tcon; - mutex_lock(&sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&sb->s_vfs_rename_mutex); if(full_path == NULL) { FreeXid(xid); return -ENOMEM; @@ -116,9 +114,7 @@ int cifs_setxattr(struct dentry * direntry, const char * ea_name, cifs_sb = CIFS_SB(sb); pTcon = cifs_sb->tcon; - mutex_lock(&sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&sb->s_vfs_rename_mutex); if(full_path == NULL) { FreeXid(xid); return -ENOMEM; @@ -223,9 +219,7 @@ ssize_t cifs_getxattr(struct dentry * direntry, const char * ea_name, cifs_sb = CIFS_SB(sb); pTcon = cifs_sb->tcon; - mutex_lock(&sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&sb->s_vfs_rename_mutex); if(full_path == NULL) { FreeXid(xid); return -ENOMEM; @@ -341,9 +335,7 @@ ssize_t cifs_listxattr(struct dentry * direntry, char * data, size_t buf_size) cifs_sb = CIFS_SB(sb); pTcon = cifs_sb->tcon; - mutex_lock(&sb->s_vfs_rename_mutex); full_path = build_path_from_dentry(direntry); - mutex_unlock(&sb->s_vfs_rename_mutex); if(full_path == NULL) { FreeXid(xid); return -ENOMEM; From 296034f7de8bdf111984ce1630ac598a9c94a253 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 21 Apr 2006 18:18:37 +0000 Subject: [PATCH 012/160] [CIFS] Don't allow a backslash in a path component Unless Posix paths have been negotiated, the backslash, "\", is not a valid character in a path component. Signed-off-by: Dave Kleikamp Signed-off-by: Steve French --- fs/cifs/dir.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 3830dfeb31cf..82315edc77d7 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -436,6 +436,20 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, struct name cifs_sb = CIFS_SB(parent_dir_inode->i_sb); pTcon = cifs_sb->tcon; + /* + * Don't allow the separator character in a path component. + * The VFS will not allow "/", but "\" is allowed by posix. + */ + if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)) { + int i; + for (i = 0; i < direntry->d_name.len; i++) + if (direntry->d_name.name[i] == '\\') { + cFYI(1, ("Invalid file name")); + FreeXid(xid); + return ERR_PTR(-EINVAL); + } + } + /* can not grab the rename sem here since it would deadlock in the cases (beginning of sys_rename itself) in which we already have the sb rename sem */ From e74eb808ba64610d4983ddd8b5b9a159d178aa8e Mon Sep 17 00:00:00 2001 From: Stuart Brady Date: Tue, 1 Mar 2005 23:00:56 +0000 Subject: [PATCH 013/160] [PARISC] OSS ad1889: Match register names with ALSA driver Signed-off-by: Stuart Brady Signed-off-by: Kyle McMartin --- sound/oss/ad1889.c | 198 ++++++++++++++++++++++----------------------- sound/oss/ad1889.h | 97 +++++++++++----------- 2 files changed, 148 insertions(+), 147 deletions(-) diff --git a/sound/oss/ad1889.c b/sound/oss/ad1889.c index 54dabf862802..a4ca7569e700 100644 --- a/sound/oss/ad1889.c +++ b/sound/oss/ad1889.c @@ -75,7 +75,7 @@ static inline void ad1889_set_wav_rate(ad1889_dev_t *dev, int rate) DBG("Setting WAV rate to %d\n", rate); dev->state[AD_WAV_STATE].dmabuf.rate = rate; - AD1889_WRITEW(dev, AD_DSWAS, rate); + AD1889_WRITEW(dev, AD_DS_WAS, rate); /* Cycle the DAC to enable the new rate */ ac97_codec->codec_write(dev->ac97_codec, AC97_POWER_CONTROL, 0x0200); @@ -89,14 +89,14 @@ static inline void ad1889_set_wav_fmt(ad1889_dev_t *dev, int fmt) DBG("Setting WAV format to 0x%x\n", fmt); - tmp = AD1889_READW(ad1889_dev, AD_DSWSMC); + tmp = AD1889_READW(ad1889_dev, AD_DS_WSMC); if (fmt & AFMT_S16_LE) { //tmp |= 0x0100; /* set WA16 */ tmp |= 0x0300; /* set WA16 stereo */ } else if (fmt & AFMT_U8) { tmp &= ~0x0100; /* clear WA16 */ } - AD1889_WRITEW(ad1889_dev, AD_DSWSMC, tmp); + AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, tmp); } static inline void ad1889_set_adc_fmt(ad1889_dev_t *dev, int fmt) @@ -105,13 +105,13 @@ static inline void ad1889_set_adc_fmt(ad1889_dev_t *dev, int fmt) DBG("Setting ADC format to 0x%x\n", fmt); - tmp = AD1889_READW(ad1889_dev, AD_DSRAMC); + tmp = AD1889_READW(ad1889_dev, AD_DS_RAMC); if (fmt & AFMT_S16_LE) { tmp |= 0x0100; /* set WA16 */ } else if (fmt & AFMT_U8) { tmp &= ~0x0100; /* clear WA16 */ } - AD1889_WRITEW(ad1889_dev, AD_DSRAMC, tmp); + AD1889_WRITEW(ad1889_dev, AD_DS_RAMC, tmp); } static void ad1889_start_wav(ad1889_state_t *state) @@ -145,21 +145,21 @@ static void ad1889_start_wav(ad1889_state_t *state) dmabuf->rd_ptr, dmabuf->dma_len); /* load up the current register set */ - AD1889_WRITEL(ad1889_dev, AD_DMAWAVCC, cnt); - AD1889_WRITEL(ad1889_dev, AD_DMAWAVICC, cnt); - AD1889_WRITEL(ad1889_dev, AD_DMAWAVCA, dmabuf->dma_handle); + AD1889_WRITEL(ad1889_dev, AD_DMA_WAVCC, cnt); + AD1889_WRITEL(ad1889_dev, AD_DMA_WAVICC, cnt); + AD1889_WRITEL(ad1889_dev, AD_DMA_WAVCA, dmabuf->dma_handle); /* TODO: for now we load the base registers with the same thing */ - AD1889_WRITEL(ad1889_dev, AD_DMAWAVBC, cnt); - AD1889_WRITEL(ad1889_dev, AD_DMAWAVIBC, cnt); - AD1889_WRITEL(ad1889_dev, AD_DMAWAVBA, dmabuf->dma_handle); + AD1889_WRITEL(ad1889_dev, AD_DMA_WAVBC, cnt); + AD1889_WRITEL(ad1889_dev, AD_DMA_WAVIBC, cnt); + AD1889_WRITEL(ad1889_dev, AD_DMA_WAVBA, dmabuf->dma_handle); /* and we're off to the races... */ - AD1889_WRITEL(ad1889_dev, AD_DMACHSS, 0x8); - tmp = AD1889_READW(ad1889_dev, AD_DSWSMC); + AD1889_WRITEL(ad1889_dev, AD_DMA_CHSS, 0x8); + tmp = AD1889_READW(ad1889_dev, AD_DS_WSMC); tmp |= 0x0400; /* set WAEN */ - AD1889_WRITEW(ad1889_dev, AD_DSWSMC, tmp); - (void) AD1889_READW(ad1889_dev, AD_DSWSMC); /* flush posted PCI write */ + AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, tmp); + (void) AD1889_READW(ad1889_dev, AD_DS_WSMC); /* flush posted PCI write */ dmabuf->enable |= DAC_RUNNING; @@ -179,10 +179,10 @@ static void ad1889_stop_wav(ad1889_state_t *state) u16 tmp; unsigned long cnt = dmabuf->dma_len; - tmp = AD1889_READW(ad1889_dev, AD_DSWSMC); + tmp = AD1889_READW(ad1889_dev, AD_DS_WSMC); tmp &= ~0x0400; /* clear WAEN */ - AD1889_WRITEW(ad1889_dev, AD_DSWSMC, tmp); - (void) AD1889_READW(ad1889_dev, AD_DSWSMC); /* flush posted PCI write */ + AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, tmp); + (void) AD1889_READW(ad1889_dev, AD_DS_WSMC); /* flush posted PCI write */ pci_unmap_single(ad1889_dev->pci, dmabuf->dma_handle, cnt, PCI_DMA_TODEVICE); @@ -211,7 +211,7 @@ static void ad1889_startstop_adc(ad1889_state_t *state, int start) spin_lock_irqsave(&state->card->lock, flags); - tmp = AD1889_READW(ad1889_dev, AD_DSRAMC); + tmp = AD1889_READW(ad1889_dev, AD_DS_RAMC); if (start) { state->dmabuf.enable |= ADC_RUNNING; tmp |= 0x0004; /* set ADEN */ @@ -219,7 +219,7 @@ static void ad1889_startstop_adc(ad1889_state_t *state, int start) state->dmabuf.enable &= ~ADC_RUNNING; tmp &= ~0x0004; /* clear ADEN */ } - AD1889_WRITEW(ad1889_dev, AD_DSRAMC, tmp); + AD1889_WRITEW(ad1889_dev, AD_DS_RAMC, tmp); spin_unlock_irqrestore(&state->card->lock, flags); } @@ -301,53 +301,53 @@ static int ad1889_read_proc (char *page, char **start, off_t off, int len, i; ad1889_dev_t *dev = data; ad1889_reg_t regs[] = { - { "WSMC", AD_DSWSMC, 16 }, - { "RAMC", AD_DSRAMC, 16 }, - { "WADA", AD_DSWADA, 16 }, - { "SYDA", AD_DSSYDA, 16 }, - { "WAS", AD_DSWAS, 16 }, - { "RES", AD_DSRES, 16 }, - { "CCS", AD_DSCCS, 16 }, - { "ADCBA", AD_DMAADCBA, 32 }, - { "ADCCA", AD_DMAADCCA, 32 }, - { "ADCBC", AD_DMAADCBC, 32 }, - { "ADCCC", AD_DMAADCCC, 32 }, - { "ADCIBC", AD_DMAADCIBC, 32 }, - { "ADCICC", AD_DMAADCICC, 32 }, - { "ADCCTRL", AD_DMAADCCTRL, 16 }, - { "WAVBA", AD_DMAWAVBA, 32 }, - { "WAVCA", AD_DMAWAVCA, 32 }, - { "WAVBC", AD_DMAWAVBC, 32 }, - { "WAVCC", AD_DMAWAVCC, 32 }, - { "WAVIBC", AD_DMAWAVIBC, 32 }, - { "WAVICC", AD_DMAWAVICC, 32 }, - { "WAVCTRL", AD_DMAWAVCTRL, 16 }, - { "DISR", AD_DMADISR, 32 }, - { "CHSS", AD_DMACHSS, 32 }, - { "IPC", AD_GPIOIPC, 16 }, - { "OP", AD_GPIOOP, 16 }, - { "IP", AD_GPIOIP, 16 }, - { "ACIC", AD_ACIC, 16 }, - { "AC97_RESET", 0x100 + AC97_RESET, 16 }, - { "AC97_MASTER_VOL_STEREO", 0x100 + AC97_MASTER_VOL_STEREO, 16 }, - { "AC97_HEADPHONE_VOL", 0x100 + AC97_HEADPHONE_VOL, 16 }, - { "AC97_MASTER_VOL_MONO", 0x100 + AC97_MASTER_VOL_MONO, 16 }, - { "AC97_MASTER_TONE", 0x100 + AC97_MASTER_TONE, 16 }, - { "AC97_PCBEEP_VOL", 0x100 + AC97_PCBEEP_VOL, 16 }, - { "AC97_PHONE_VOL", 0x100 + AC97_PHONE_VOL, 16 }, - { "AC97_MIC_VOL", 0x100 + AC97_MIC_VOL, 16 }, - { "AC97_LINEIN_VOL", 0x100 + AC97_LINEIN_VOL, 16 }, - { "AC97_CD_VOL", 0x100 + AC97_CD_VOL, 16 }, - { "AC97_VIDEO_VOL", 0x100 + AC97_VIDEO_VOL, 16 }, - { "AC97_AUX_VOL", 0x100 + AC97_AUX_VOL, 16 }, - { "AC97_PCMOUT_VOL", 0x100 + AC97_PCMOUT_VOL, 16 }, - { "AC97_RECORD_SELECT", 0x100 + AC97_RECORD_SELECT, 16 }, - { "AC97_RECORD_GAIN", 0x100 + AC97_RECORD_GAIN, 16 }, - { "AC97_RECORD_GAIN_MIC", 0x100 + AC97_RECORD_GAIN_MIC, 16 }, - { "AC97_GENERAL_PURPOSE", 0x100 + AC97_GENERAL_PURPOSE, 16 }, - { "AC97_3D_CONTROL", 0x100 + AC97_3D_CONTROL, 16 }, - { "AC97_MODEM_RATE", 0x100 + AC97_MODEM_RATE, 16 }, - { "AC97_POWER_CONTROL", 0x100 + AC97_POWER_CONTROL, 16 }, + { "WSMC", AD_DS_WSMC, 16 }, + { "RAMC", AD_DS_RAMC, 16 }, + { "WADA", AD_DS_WADA, 16 }, + { "SYDA", AD_DS_SYDA, 16 }, + { "WAS", AD_DS_WAS, 16 }, + { "RES", AD_DS_RES, 16 }, + { "CCS", AD_DS_CCS, 16 }, + { "ADCBA", AD_DMA_ADCBA, 32 }, + { "ADCCA", AD_DMA_ADCCA, 32 }, + { "ADCBC", AD_DMA_ADCBC, 32 }, + { "ADCCC", AD_DMA_ADCCC, 32 }, + { "ADCIBC", AD_DMA_ADCIBC, 32 }, + { "ADCICC", AD_DMA_ADCICC, 32 }, + { "ADCCTRL", AD_DMA_ADCCTRL, 16 }, + { "WAVBA", AD_DMA_WAVBA, 32 }, + { "WAVCA", AD_DMA_WAVCA, 32 }, + { "WAVBC", AD_DMA_WAVBC, 32 }, + { "WAVCC", AD_DMA_WAVCC, 32 }, + { "WAVIBC", AD_DMA_WAVIBC, 32 }, + { "WAVICC", AD_DMA_WAVICC, 32 }, + { "WAVCTRL", AD_DMA_WAVCTRL, 16 }, + { "DISR", AD_DMA_DISR, 32 }, + { "CHSS", AD_DMA_CHSS, 32 }, + { "IPC", AD_GPIO_IPC, 16 }, + { "OP", AD_GPIO_OP, 16 }, + { "IP", AD_GPIO_IP, 16 }, + { "ACIC", AD_AC97_ACIC, 16 }, + { "AC97_RESET", AD_AC97_BASE + AC97_RESET, 16 }, + { "AC97_MASTER_VOL_STEREO", AD_AC97_BASE + AC97_MASTER_VOL_STEREO, 16 }, + { "AC97_HEADPHONE_VOL", AD_AC97_BASE + AC97_HEADPHONE_VOL, 16 }, + { "AC97_MASTER_VOL_MONO", AD_AC97_BASE + AC97_MASTER_VOL_MONO, 16 }, + { "AC97_MASTER_TONE", AD_AC97_BASE + AC97_MASTER_TONE, 16 }, + { "AC97_PCBEEP_VOL", AD_AC97_BASE + AC97_PCBEEP_VOL, 16 }, + { "AC97_PHONE_VOL", AD_AC97_BASE + AC97_PHONE_VOL, 16 }, + { "AC97_MIC_VOL", AD_AC97_BASE + AC97_MIC_VOL, 16 }, + { "AC97_LINEIN_VOL", AD_AC97_BASE + AC97_LINEIN_VOL, 16 }, + { "AC97_CD_VOL", AD_AC97_BASE + AC97_CD_VOL, 16 }, + { "AC97_VIDEO_VOL", AD_AC97_BASE + AC97_VIDEO_VOL, 16 }, + { "AC97_AUX_VOL", AD_AC97_BASE + AC97_AUX_VOL, 16 }, + { "AC97_PCMOUT_VOL", AD_AC97_BASE + AC97_PCMOUT_VOL, 16 }, + { "AC97_RECORD_SELECT", AD_AC97_BASE + AC97_RECORD_SELECT, 16 }, + { "AC97_RECORD_GAIN", AD_AC97_BASE + AC97_RECORD_GAIN, 16 }, + { "AC97_RECORD_GAIN_MIC", AD_AC97_BASE + AC97_RECORD_GAIN_MIC, 16 }, + { "AC97_GENERAL_PURPOSE", AD_AC97_BASE + AC97_GENERAL_PURPOSE, 16 }, + { "AC97_3D_CONTROL", AD_AC97_BASE + AC97_3D_CONTROL, 16 }, + { "AC97_MODEM_RATE", AD_AC97_BASE + AC97_MODEM_RATE, 16 }, + { "AC97_POWER_CONTROL", AD_AC97_BASE + AC97_POWER_CONTROL, 16 }, { NULL } }; @@ -400,9 +400,9 @@ static inline unsigned long ad1889_get_dma_addr(ad1889_state_t *state) } if (dmabuf->enable & DAC_RUNNING) - offset = le32_to_cpu(AD1889_READL(state->card, AD_DMAWAVBA)); + offset = le32_to_cpu(AD1889_READL(state->card, AD_DMA_WAVBA)); else - offset = le32_to_cpu(AD1889_READL(state->card, AD_DMAADCBA)); + offset = le32_to_cpu(AD1889_READL(state->card, AD_DMA_ADCBA)); return (unsigned long)bus_to_virt((unsigned long)offset) - (unsigned long)dmabuf->rawbuf; } @@ -639,9 +639,9 @@ static int ad1889_ioctl(struct inode *inode, struct file *file, unsigned int cmd if (val > 5400 && val < 48000) { if (file->f_mode & FMODE_WRITE) - AD1889_WRITEW(ad1889_dev, AD_DSWAS, val); + AD1889_WRITEW(ad1889_dev, AD_DS_WAS, val); if (file->f_mode & FMODE_READ) - AD1889_WRITEW(ad1889_dev, AD_DSRES, val); + AD1889_WRITEW(ad1889_dev, AD_DS_RES, val); } return 0; @@ -649,22 +649,22 @@ static int ad1889_ioctl(struct inode *inode, struct file *file, unsigned int cmd if (get_user(val, p)) return -EFAULT; if (file->f_mode & FMODE_READ) { - val = AD1889_READW(ad1889_dev, AD_DSWSMC); + val = AD1889_READW(ad1889_dev, AD_DS_WSMC); if (val) { val |= 0x0200; /* set WAST */ } else { val &= ~0x0200; /* clear WAST */ } - AD1889_WRITEW(ad1889_dev, AD_DSWSMC, val); + AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, val); } if (file->f_mode & FMODE_WRITE) { - val = AD1889_READW(ad1889_dev, AD_DSRAMC); + val = AD1889_READW(ad1889_dev, AD_DS_RAMC); if (val) { val |= 0x0002; /* set ADST */ } else { val &= ~0x0002; /* clear ADST */ } - AD1889_WRITEW(ad1889_dev, AD_DSRAMC, val); + AD1889_WRITEW(ad1889_dev, AD_DS_RAMC, val); } return 0; @@ -739,7 +739,7 @@ static int ad1889_ioctl(struct inode *inode, struct file *file, unsigned int cmd break; case SOUND_PCM_READ_RATE: - return put_user(AD1889_READW(ad1889_dev, AD_DSWAS), p); + return put_user(AD1889_READW(ad1889_dev, AD_DS_WAS), p); case SOUND_PCM_READ_CHANNELS: case SOUND_PCM_READ_BITS: @@ -769,7 +769,7 @@ static int ad1889_open(struct inode *inode, struct file *file) ad1889_set_wav_rate(ad1889_dev, 48000); ad1889_set_wav_fmt(ad1889_dev, AFMT_S16_LE); - AD1889_WRITEW(ad1889_dev, AD_DSWADA, 0x0404); /* attenuation */ + AD1889_WRITEW(ad1889_dev, AD_DS_WADA, 0x0404); /* attenuation */ return nonseekable_open(inode, file); } @@ -826,15 +826,15 @@ static void ad1889_codec_write(struct ac97_codec *ac97, u8 reg, u16 val) { ad1889_dev_t *dev = ac97->private_data; - //DBG("Writing 0x%x to 0x%lx\n", val, dev->regbase + 0x100 + reg); - AD1889_WRITEW(dev, 0x100 + reg, val); + //DBG("Writing 0x%x to 0x%lx\n", val, dev->regbase + AD_AC97_BASE + reg); + AD1889_WRITEW(dev, AD_AC97_BASE + reg, val); } static u16 ad1889_codec_read(struct ac97_codec *ac97, u8 reg) { ad1889_dev_t *dev = ac97->private_data; - //DBG("Reading from 0x%lx\n", dev->regbase + 0x100 + reg); - return AD1889_READW(dev, 0x100 + reg); + //DBG("Reading from 0x%lx\n", dev->regbase + AD_AC97_BASE + reg); + return AD1889_READW(dev, AD_AC97_BASE + reg); } static int ad1889_ac97_init(ad1889_dev_t *dev, int id) @@ -883,24 +883,24 @@ static int ad1889_aclink_reset(struct pci_dev * pcidev) int retry = 200; ad1889_dev_t *dev = pci_get_drvdata(pcidev); - AD1889_WRITEW(dev, AD_DSCCS, 0x8000); /* turn on clock */ - AD1889_READW(dev, AD_DSCCS); + AD1889_WRITEW(dev, AD_DS_CCS, 0x8000); /* turn on clock */ + AD1889_READW(dev, AD_DS_CCS); WAIT_10MS(); - stat = AD1889_READW(dev, AD_ACIC); + stat = AD1889_READW(dev, AD_AC97_ACIC); stat |= 0x0002; /* Reset Disable */ - AD1889_WRITEW(dev, AD_ACIC, stat); - (void) AD1889_READW(dev, AD_ACIC); /* flush posted write */ + AD1889_WRITEW(dev, AD_AC97_ACIC, stat); + (void) AD1889_READW(dev, AD_AC97_ACIC); /* flush posted write */ udelay(10); - stat = AD1889_READW(dev, AD_ACIC); + stat = AD1889_READW(dev, AD_AC97_ACIC); stat |= 0x0001; /* Interface Enable */ - AD1889_WRITEW(dev, AD_ACIC, stat); + AD1889_WRITEW(dev, AD_AC97_ACIC, stat); do { - if (AD1889_READW(dev, AD_ACIC) & 0x8000) /* Ready */ + if (AD1889_READW(dev, AD_AC97_ACIC) & 0x8000) /* Ready */ break; WAIT_10MS(); retry--; @@ -908,16 +908,16 @@ static int ad1889_aclink_reset(struct pci_dev * pcidev) if (!retry) { printk(KERN_ERR "ad1889_aclink_reset: codec is not ready [0x%x]\n", - AD1889_READW(dev, AD_ACIC)); + AD1889_READW(dev, AD_AC97_ACIC)); return -EBUSY; } /* TODO reset AC97 codec */ /* TODO set wave/adc pci ctrl status */ - stat = AD1889_READW(dev, AD_ACIC); + stat = AD1889_READW(dev, AD_AC97_ACIC); stat |= 0x0004; /* Audio Stream Output Enable */ - AD1889_WRITEW(dev, AD_ACIC, stat); + AD1889_WRITEW(dev, AD_AC97_ACIC, stat); return 0; } @@ -935,10 +935,10 @@ static irqreturn_t ad1889_interrupt(int irq, void *dev_id, struct pt_regs *regs) u32 stat; ad1889_dev_t *dev = (ad1889_dev_t *)dev_id; - stat = AD1889_READL(dev, AD_DMADISR); + stat = AD1889_READL(dev, AD_DMA_DISR); /* clear ISR */ - AD1889_WRITEL(dev, AD_DMADISR, stat); + AD1889_WRITEL(dev, AD_DMA_DISR, stat); if (stat & 0x8) { /* WAVI */ DBG("WAV interrupt\n"); @@ -964,15 +964,15 @@ static void ad1889_initcfg(ad1889_dev_t *dev) u32 tmp32; /* make sure the interrupt bits are setup the way we want */ - tmp32 = AD1889_READL(dev, AD_DMAWAVCTRL); + tmp32 = AD1889_READL(dev, AD_DMA_WAVCTRL); tmp32 &= ~0xff; /* flat dma, no sg, mask out the intr bits */ tmp32 |= 0x6; /* intr on count, loop */ - AD1889_WRITEL(dev, AD_DMAWAVCTRL, tmp32); + AD1889_WRITEL(dev, AD_DMA_WAVCTRL, tmp32); /* unmute... */ - tmp16 = AD1889_READW(dev, AD_DSWADA); + tmp16 = AD1889_READW(dev, AD_DS_WADA); tmp16 &= ~0x8080; - AD1889_WRITEW(dev, AD_DSWADA, tmp16); + AD1889_WRITEW(dev, AD_DS_WADA, tmp16); } static int __devinit ad1889_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) @@ -1005,7 +1005,7 @@ static int __devinit ad1889_probe(struct pci_dev *pcidev, const struct pci_devic goto out1; } - dev->regbase = ioremap_nocache(bar, AD_DSIOMEMSIZE); + dev->regbase = ioremap_nocache(bar, AD_DS_IOMEMSIZE); if (!dev->regbase) { printk(KERN_ERR DEVNAME ": unable to remap iomem\n"); goto out2; diff --git a/sound/oss/ad1889.h b/sound/oss/ad1889.h index 861b3213f30b..09913765967a 100644 --- a/sound/oss/ad1889.h +++ b/sound/oss/ad1889.h @@ -1,57 +1,58 @@ #ifndef _AD1889_H_ #define _AD1889_H_ -#define AD_DSWSMC 0x00 /* DMA input wave/syn mixer control */ -#define AD_DSRAMC 0x02 /* DMA output resamp/ADC mixer control */ -#define AD_DSWADA 0x04 /* DMA input wave attenuation */ -#define AD_DSSYDA 0x06 /* DMA input syn attentuation */ -#define AD_DSWAS 0x08 /* wave input sample rate */ -#define AD_DSRES 0x0a /* resampler output sample rate */ -#define AD_DSCCS 0x0c /* chip control/status */ +#define AD_DS_WSMC 0x00 /* DMA input wave/syn mixer control */ +#define AD_DS_RAMC 0x02 /* DMA output resamp/ADC mixer control */ +#define AD_DS_WADA 0x04 /* DMA input wave attenuation */ +#define AD_DS_SYDA 0x06 /* DMA input syn attentuation */ +#define AD_DS_WAS 0x08 /* wave input sample rate */ +#define AD_DS_RES 0x0a /* resampler output sample rate */ +#define AD_DS_CCS 0x0c /* chip control/status */ -#define AD_DMARESBA 0x40 /* RES base addr */ -#define AD_DMARESCA 0x44 /* RES current addr */ -#define AD_DMARESBC 0x48 /* RES base cnt */ -#define AD_DMARESCC 0x4c /* RES current count */ -#define AD_DMAADCBA 0x50 /* ADC */ -#define AD_DMAADCCA 0x54 -#define AD_DMAADCBC 0x58 -#define AD_DMAADCCC 0x5c -#define AD_DMASYNBA 0x60 /* SYN */ -#define AD_DMASYNCA 0x64 -#define AD_DMASYNBC 0x68 -#define AD_DMASYNCC 0x6c -#define AD_DMAWAVBA 0x70 /* WAV */ -#define AD_DMAWAVCA 0x74 -#define AD_DMAWAVBC 0x78 -#define AD_DMAWAVCC 0x7c -#define AD_DMARESICC 0x80 /* RES interrupt current count */ -#define AD_DMARESIBC 0x84 /* RES interrupt base count */ -#define AD_DMAADCICC 0x88 /* ADC interrupt current count */ -#define AD_DMAADCIBC 0x8c /* ADC interrupt base count */ -#define AD_DMASYNICC 0x90 /* SYN interrupt current count */ -#define AD_DMASYNIBC 0x94 /* SYN interrupt base count */ -#define AD_DMAWAVICC 0x98 /* WAV interrupt current count */ -#define AD_DMAWAVIBC 0x9c /* WAV interrupt base count */ -#define AD_DMARESCTRL 0xa0 /* RES PCI control/status */ -#define AD_DMAADCCTRL 0xa8 /* ADC PCI control/status */ -#define AD_DMASYNCTRL 0xb0 /* SYN PCI control/status */ -#define AD_DMAWAVCTRL 0xb8 /* WAV PCI control/status */ -#define AD_DMADISR 0xc0 /* PCI DMA intr status */ -#define AD_DMACHSS 0xc4 /* PCI DMA channel stop status */ +#define AD_DMA_RESBA 0x40 /* RES base addr */ +#define AD_DMA_RESCA 0x44 /* RES current addr */ +#define AD_DMA_RESBC 0x48 /* RES base cnt */ +#define AD_DMA_RESCC 0x4c /* RES current count */ +#define AD_DMA_ADCBA 0x50 /* ADC */ +#define AD_DMA_ADCCA 0x54 +#define AD_DMA_ADCBC 0x58 +#define AD_DMA_ADCCC 0x5c +#define AD_DMA_SYNBA 0x60 /* SYN */ +#define AD_DMA_SYNCA 0x64 +#define AD_DMA_SYNBC 0x68 +#define AD_DMA_SYNCC 0x6c +#define AD_DMA_WAVBA 0x70 /* WAV */ +#define AD_DMA_WAVCA 0x74 +#define AD_DMA_WAVBC 0x78 +#define AD_DMA_WAVCC 0x7c +#define AD_DMA_RESICC 0x80 /* RES interrupt current count */ +#define AD_DMA_RESIBC 0x84 /* RES interrupt base count */ +#define AD_DMA_ADCICC 0x88 /* ADC interrupt current count */ +#define AD_DMA_ADCIBC 0x8c /* ADC interrupt base count */ +#define AD_DMA_SYNICC 0x90 /* SYN interrupt current count */ +#define AD_DMA_SYNIBC 0x94 /* SYN interrupt base count */ +#define AD_DMA_WAVICC 0x98 /* WAV interrupt current count */ +#define AD_DMA_WAVIBC 0x9c /* WAV interrupt base count */ +#define AD_DMA_RESCTRL 0xa0 /* RES PCI control/status */ +#define AD_DMA_ADCCTRL 0xa8 /* ADC PCI control/status */ +#define AD_DMA_SYNCTRL 0xb0 /* SYN PCI control/status */ +#define AD_DMA_WAVCTRL 0xb8 /* WAV PCI control/status */ +#define AD_DMA_DISR 0xc0 /* PCI DMA intr status */ +#define AD_DMA_CHSS 0xc4 /* PCI DMA channel stop status */ -#define AD_GPIOIPC 0xc8 /* IO port ctrl */ -#define AD_GPIOOP 0xca /* IO output status */ -#define AD_GPIOIP 0xcc /* IO input status */ +#define AD_GPIO_IPC 0xc8 /* IO port ctrl */ +#define AD_GPIO_OP 0xca /* IO output status */ +#define AD_GPIO_IP 0xcc /* IO input status */ /* AC97 registers, 0x100 - 0x17f; see ac97.h */ -#define AD_ACIC 0x180 /* AC Link interface ctrl */ +#define AD_AC97_BASE 0x100 /* ac97 base register */ +#define AD_AC97_ACIC 0x180 /* AC Link interface ctrl */ /* OPL3; BAR1 */ -#define AD_OPLM0AS 0x00 /* Music0 address/status */ -#define AD_OPLM0DATA 0x01 /* Music0 data */ -#define AD_OPLM1A 0x02 /* Music1 address */ -#define AD_OPLM1DATA 0x03 /* Music1 data */ +#define AD_OPL_M0AS 0x00 /* Music0 address/status */ +#define AD_OPL_M0DATA 0x01 /* Music0 data */ +#define AD_OPL_M1A 0x02 /* Music1 address */ +#define AD_OPL_M1DATA 0x03 /* Music1 data */ /* 0x04-0x0f reserved */ /* MIDI; BAR2 */ @@ -59,9 +60,9 @@ #define AD_MISC 0x01 /* MIDI status/cmd */ /* 0x02-0xff reserved */ -#define AD_DSIOMEMSIZE 512 -#define AD_OPLMEMSIZE 16 -#define AD_MIDIMEMSIZE 16 +#define AD_DS_IOMEMSIZE 512 +#define AD_OPL_MEMSIZE 16 +#define AD_MIDI_MEMSIZE 16 #define AD_WAV_STATE 0 #define AD_ADC_STATE 1 From b2d6b9fb35bf670df8049f0b3d4d306bf2d454da Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 27 Mar 2006 19:52:14 +0000 Subject: [PATCH 014/160] [PARISC] EISA regions must be mapped NO_CACHE Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/mm/ioremap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c index 0db12818d7bc..27384567a1d0 100644 --- a/arch/parisc/mm/ioremap.c +++ b/arch/parisc/mm/ioremap.c @@ -2,7 +2,7 @@ * arch/parisc/mm/ioremap.c * * (C) Copyright 1995 1996 Linus Torvalds - * (C) Copyright 2001 Helge Deller + * (C) Copyright 2001-2006 Helge Deller * (C) Copyright 2005 Kyle McMartin */ @@ -138,6 +138,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l if ((phys_addr >= 0x00080000 && end < 0x000fffff) || (phys_addr >= 0x00500000 && end < 0x03bfffff)) { phys_addr |= F_EXTEND(0xfc000000); + flags |= _PAGE_NO_CACHE; } #endif From 67a5a59d3301949f51f2d617d689f005c6d21470 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 27 Mar 2006 19:52:14 +0000 Subject: [PATCH 015/160] [PARISC] Misc. janitorial work Fix a spelling mistake, add a KERN_INFO flag, and fix some whitespace uglies. Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/kernel/cache.c | 4 ++-- arch/parisc/mm/fault.c | 2 +- drivers/parisc/pdc_stable.c | 2 +- drivers/parisc/superio.c | 4 ++-- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 360b7391cb8c..c057ad7605ba 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -4,7 +4,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999 Helge Deller (07-13-1999) + * Copyright (C) 1999-2006 Helge Deller (07-13-1999) * Copyright (C) 1999 SuSE GmbH Nuernberg * Copyright (C) 2000 Philipp Rumpf (prumpf@tux.org) * @@ -358,5 +358,5 @@ void parisc_setup_cache_timing(void) if (!parisc_cache_flush_threshold) parisc_cache_flush_threshold = FLUSH_THRESHOLD; - printk("Setting cache flush threshold to %x (%d CPUs online)\n", parisc_cache_flush_threshold, num_online_cpus()); + printk(KERN_INFO "Setting cache flush threshold to %x (%d CPUs online)\n", parisc_cache_flush_threshold, num_online_cpus()); } diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 0ad945d4c0a4..64785e46f93b 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -186,7 +186,7 @@ good_area: break; case VM_FAULT_SIGBUS: /* - * We hit a hared mapping outside of the file, or some + * We hit a shared mapping outside of the file, or some * other thing happened to us that made us unable to * handle the page fault gracefully. */ diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 4e53be9c03ab..bbeabe3fc4c6 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -535,7 +535,7 @@ pdcs_auto_read(struct subsystem *entry, char *buf, int knob) { char *out = buf; struct pdcspath_entry *pathentry; - + if (!entry || !buf) return -EINVAL; diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index 719b863bc20e..828eb45062de 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -155,7 +155,7 @@ superio_init(struct pci_dev *pcidev) struct pci_dev *pdev = sio->lio_pdev; u16 word; - if (sio->suckyio_irq_enabled) + if (sio->suckyio_irq_enabled) return; BUG_ON(!pdev); @@ -194,7 +194,7 @@ superio_init(struct pci_dev *pcidev) request_region (sio->acpi_base, 0x1f, "acpi"); /* Enable the legacy I/O function */ - pci_read_config_word (pdev, PCI_COMMAND, &word); + pci_read_config_word (pdev, PCI_COMMAND, &word); word |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_IO; pci_write_config_word (pdev, PCI_COMMAND, word); From b312c33e362696d873931d8f84a89b3e894077c8 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Thu, 30 Mar 2006 07:13:21 +0000 Subject: [PATCH 016/160] [PARISC] Document that we tolerate "Relaxed Ordering" This means "DMA Read returns" can bypass "MMIO Writes". Violating the PCI specs in this case improves outbound DMA "flows" and is currently not required by any drivers. This is NOT a new behavior. Previous chipsets did this already and I believe ZX1 PDC was already setting this for hpux. I just want to further document the behavior. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- drivers/parisc/sba_iommu.c | 43 +++++++++++++++++++++++++++----------- 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 42b32ff2fca6..278f325021ee 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -178,6 +178,11 @@ extern struct proc_dir_entry * proc_mckinley_root; #define ROPE6_CTL 0x230 #define ROPE7_CTL 0x238 +#define IOC_ROPE0_CFG 0x500 /* pluto only */ +#define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */ + + + #define HF_ENABLE 0x40 @@ -1759,19 +1764,33 @@ printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa, sba_dev->num_ioc = num_ioc; for (i = 0; i < num_ioc; i++) { - /* - ** Make sure the box crashes if we get any errors on a rope. - */ - WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE0_CTL); - WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE1_CTL); - WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE2_CTL); - WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE3_CTL); - WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE4_CTL); - WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE5_CTL); - WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE6_CTL); - WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE7_CTL); + unsigned long ioc_hpa = sba_dev->ioc[i].ioc_hpa; + unsigned int j; - /* flush out the writes */ + for (j=0; j < sizeof(u64) * ROPES_PER_IOC; j+=sizeof(u64)) { + + /* + * Clear ROPE(N)_CONFIG AO bit. + * Disables "NT Ordering" (~= !"Relaxed Ordering") + * Overrides bit 1 in DMA Hint Sets. + * Improves netperf UDP_STREAM by ~10% for bcm5701. + */ + if (IS_PLUTO(sba_dev->iodc)) { + unsigned long rope_cfg, cfg_val; + + rope_cfg = ioc_hpa + IOC_ROPE0_CFG + j; + cfg_val = READ_REG(rope_cfg); + cfg_val &= ~IOC_ROPE_AO; + WRITE_REG(cfg_val, rope_cfg); + } + + /* + ** Make sure the box crashes on rope errors. + */ + WRITE_REG(HF_ENABLE, ioc_hpa + ROPE0_CTL + j); + } + + /* flush out the last writes */ READ_REG(sba_dev->ioc[i].ioc_hpa + ROPE7_CTL); DBG_INIT(" ioc[%d] ROPE_CFG 0x%Lx ROPE_DBG 0x%Lx\n", From 8ea6947b4b9d918784fa6a1f93ca2882d94b71b6 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 2 Apr 2006 13:28:00 +0000 Subject: [PATCH 017/160] [PARISC] defconfig updates Make the defconfig more generally useful. Turn on IPv6, modules, cardbus, etc. Boots 32bit on 715 with HIL, B160L with sound, PrecisionBook, and C3000. Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/defconfig | 494 +++++++++++++++++++++++++++--------------- 1 file changed, 315 insertions(+), 179 deletions(-) diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig index 59f7bc38e72e..b38b58eb9dc2 100644 --- a/arch/parisc/defconfig +++ b/arch/parisc/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-pa6 -# Sun Mar 26 19:50:07 2006 +# Linux kernel version: 2.6.16-pa10 +# Sun Apr 2 15:26:38 2006 # CONFIG_PARISC=y CONFIG_MMU=y @@ -25,7 +25,7 @@ CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set @@ -35,7 +35,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -57,7 +57,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # Block layer @@ -79,16 +85,19 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # -CONFIG_PA7000=y -# CONFIG_PA7100LC is not set +# CONFIG_PA7000 is not set +CONFIG_PA7100LC=y # CONFIG_PA7200 is not set # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y +CONFIG_PARISC_PAGE_SIZE_4KB=y +# CONFIG_PARISC_PAGE_SIZE_16KB is not set +# CONFIG_PARISC_PAGE_SIZE_64KB is not set # CONFIG_SMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y @@ -108,7 +117,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # Bus options (PCI, PCMCIA, EISA, GSC, ISA) # CONFIG_GSC=y -CONFIG_HPPB=y +# CONFIG_HPPB is not set CONFIG_IOMMU_CCIO=y CONFIG_GSC_LASI=y CONFIG_GSC_WAX=y @@ -126,7 +135,25 @@ CONFIG_IOMMU_SBA=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +CONFIG_PD6729=y +CONFIG_I82092=y +CONFIG_PCCARD_NONSTATIC=y # # PCI Hotplug Support @@ -145,7 +172,7 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=m # # Networking @@ -159,13 +186,15 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -# CONFIG_NET_KEY is not set +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set @@ -173,19 +202,20 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m # CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_DIAG is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y +CONFIG_INET6_IPCOMP=y +CONFIG_INET6_TUNNEL=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETFILTER is not set @@ -207,7 +237,8 @@ CONFIG_IPV6=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set -# CONFIG_LLC2 is not set +CONFIG_LLC=m +CONFIG_LLC2=m # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set @@ -237,9 +268,9 @@ CONFIG_IPV6=y # # Generic Driver Options # -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # @@ -256,13 +287,14 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Parallel port support # CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y +CONFIG_PARPORT_PC=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set +CONFIG_PARPORT_PC_PCMCIA=m CONFIG_PARPORT_NOT_PC=y CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_1284 is not set +CONFIG_PARPORT_1284=y # # Plug and Play support @@ -284,7 +316,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_SIZE=6144 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -292,7 +324,60 @@ CONFIG_BLK_DEV_INITRD=y # # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_BLK_DEV_IDESCSI=y +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +CONFIG_BLK_DEV_NS87415=y +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -374,6 +459,15 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + # # Multi-device support (RAID and LVM) # @@ -382,12 +476,17 @@ CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y -# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID10=y CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set +CONFIG_MD_RAID6=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -411,10 +510,10 @@ CONFIG_MD_RAID5=y # Network device support # CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set +CONFIG_DUMMY=m +CONFIG_BONDING=m # CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set +CONFIG_TUN=m # # ARCnet devices @@ -430,7 +529,7 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=m CONFIG_LASI_82596=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set @@ -451,6 +550,8 @@ CONFIG_TULIP=y # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set +# CONFIG_PCMCIA_XIRTULIP is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -518,13 +619,32 @@ CONFIG_NET_RADIO=y # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set # # Wireless 802.11b ISA/PCI cards support # -# CONFIG_HERMES is not set +CONFIG_HERMES=y +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +# CONFIG_PCI_HERMES is not set # CONFIG_ATMEL is not set +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=y +CONFIG_PCMCIA_SPECTRUM=y +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set + # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # @@ -532,6 +652,19 @@ CONFIG_NET_RADIO=y # CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + # # Wan interfaces # @@ -539,7 +672,15 @@ CONFIG_NET_WIRELESS=y # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set -# CONFIG_PPP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set @@ -571,14 +712,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y +# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -586,52 +729,25 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_HIL_OLD is not set CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_VSXXXAA is not set CONFIG_MOUSE_HIL=y -CONFIG_INPUT_JOYSTICK=y -# CONFIG_JOYSTICK_ANALOG is not set -# CONFIG_JOYSTICK_A3D is not set -# CONFIG_JOYSTICK_ADI is not set -# CONFIG_JOYSTICK_COBRA is not set -# CONFIG_JOYSTICK_GF2K is not set -# CONFIG_JOYSTICK_GRIP is not set -# CONFIG_JOYSTICK_GRIP_MP is not set -# CONFIG_JOYSTICK_GUILLEMOT is not set -# CONFIG_JOYSTICK_INTERACT is not set -# CONFIG_JOYSTICK_SIDEWINDER is not set -# CONFIG_JOYSTICK_TMDC is not set -# CONFIG_JOYSTICK_IFORCE is not set -# CONFIG_JOYSTICK_WARRIOR is not set -# CONFIG_JOYSTICK_MAGELLAN is not set -# CONFIG_JOYSTICK_SPACEORB is not set -# CONFIG_JOYSTICK_SPACEBALL is not set -# CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDJOY is not set -# CONFIG_JOYSTICK_DB9 is not set -# CONFIG_JOYSTICK_GAMECON is not set -# CONFIG_JOYSTICK_TURBOGRAFX is not set -# CONFIG_JOYSTICK_JOYDUMP is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_UINPUT is not set -CONFIG_HP_SDC_RTC=y +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_GSCPS2=y CONFIG_HP_SDC=y CONFIG_HIL_MLC=y # CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -648,7 +764,8 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=13 +CONFIG_SERIAL_8250_CS=y +CONFIG_SERIAL_8250_NR_UARTS=17 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y @@ -666,10 +783,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=y +CONFIG_LEGACY_PTY_COUNT=64 +CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set +CONFIG_PPDEV=m # CONFIG_TIPAR is not set # @@ -682,7 +799,7 @@ CONFIG_PRINTER=y # # CONFIG_WATCHDOG is not set CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -691,6 +808,13 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # # CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # @@ -718,10 +842,8 @@ CONFIG_GEN_RTC=y # # Hardware Monitoring support # -CONFIG_HWMON=y +# CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -749,8 +871,8 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -778,8 +900,8 @@ CONFIG_FB_STI=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y -CONFIG_DUMMY_CONSOLE_COLUMNS=160 -CONFIG_DUMMY_CONSOLE_ROWS=64 +CONFIG_DUMMY_CONSOLE_COLUMNS=128 +CONFIG_DUMMY_CONSOLE_ROWS=48 CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_STI_CONSOLE=y @@ -816,13 +938,14 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -830,6 +953,7 @@ CONFIG_SND_SUPPORT_OLD_API=y # # Generic devices # +CONFIG_SND_OPL3_LIB=y CONFIG_SND_AC97_CODEC=y CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set @@ -842,7 +966,7 @@ CONFIG_SND_AC97_BUS=y # PCI devices # CONFIG_SND_AD1889=y -# CONFIG_SND_AD1889_OPL3 is not set +CONFIG_SND_AD1889_OPL3=y # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -889,6 +1013,10 @@ CONFIG_SND_AD1889=y # # CONFIG_SND_USB_AUDIO is not set +# +# PCMCIA devices +# + # # GSC devices # @@ -905,12 +1033,12 @@ CONFIG_SND_HARMONY=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # -# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -918,14 +1046,12 @@ CONFIG_USB_DEBUG=y # # USB Host Controller Drivers # -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set +CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # @@ -948,13 +1074,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Input Devices # -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set @@ -1020,8 +1144,8 @@ CONFIG_USB_MON=y # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set # # USB DSL modem support @@ -1058,7 +1182,7 @@ CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set @@ -1066,7 +1190,7 @@ CONFIG_JBD=y CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1081,8 +1205,11 @@ CONFIG_JOLIET=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1125,7 +1252,7 @@ CONFIG_NFS_V3=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1133,10 +1260,16 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1153,50 +1286,50 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y # # Profiling support # CONFIG_PROFILING=y -CONFIG_OPROFILE=y +CONFIG_OPROFILE=m # # Kernel hacking @@ -1204,7 +1337,7 @@ CONFIG_OPROFILE=y # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=15 +CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set @@ -1217,42 +1350,43 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_VM is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_DEBUG_RODATA=y +# CONFIG_DEBUG_RODATA is not set # # Security options # -# CONFIG_KEYS is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m # # Hardware crypto devices @@ -1261,7 +1395,9 @@ CONFIG_CRYPTO=y # # Library routines # -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y From d668da80d613def981c573354e1853e38bd0698d Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 3 Apr 2006 13:44:17 +0000 Subject: [PATCH 018/160] [PARISC] Fix up hil_kbd.c mismerge Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/input/keyboard/hil_kbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index 1dca3cf42a54..2e4abdc26367 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -350,11 +350,11 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) return 0; bail2: serio_close(serio); + serio_set_drvdata(serio, NULL); bail1: input_free_device(kbd->dev); bail0: kfree(kbd); - serio_set_drvdata(serio, NULL); return -EIO; } From 2fd83038160531245099c3c5b3511fa4b80765eb Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 20 Apr 2006 20:40:23 +0000 Subject: [PATCH 019/160] [PARISC] Further work for multiple page sizes More work towards supporing multiple page sizes on 64-bit. Convert some assumptions that 64bit uses 3 level page tables into testing PT_NLEVELS. Also some BUG() to BUG_ON() conversions and some cleanups to assembler. Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- arch/parisc/Kconfig | 31 ++++++++++++++++ arch/parisc/kernel/asm-offsets.c | 3 ++ arch/parisc/kernel/entry.S | 36 +++++++++++------- arch/parisc/kernel/head.S | 15 ++++---- arch/parisc/kernel/init_task.c | 10 ++--- arch/parisc/kernel/pacache.S | 25 ++++++------- arch/parisc/kernel/syscall.S | 10 ++--- arch/parisc/kernel/vmlinux.lds.S | 54 ++++++++++++++++----------- arch/parisc/mm/init.c | 28 +++++++------- include/asm-parisc/page.h | 25 +++++++++++-- include/asm-parisc/pgtable.h | 63 ++++++++++++++++++++++---------- 11 files changed, 198 insertions(+), 102 deletions(-) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 19f911c5dd58..910fb3afc0b5 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -138,6 +138,37 @@ config 64BIT enable this option otherwise. The 64bit kernel is significantly bigger and slower than the 32bit one. +choice + prompt "Kernel page size" + default PARISC_PAGE_SIZE_4KB if !64BIT + default PARISC_PAGE_SIZE_4KB if 64BIT +# default PARISC_PAGE_SIZE_16KB if 64BIT + +config PARISC_PAGE_SIZE_4KB + bool "4KB" + help + This lets you select the page size of the kernel. For best + performance, a page size of 16KB is recommended. For best + compatibility with 32bit applications, a page size of 4KB should be + selected (the vast majority of 32bit binaries work perfectly fine + with a larger page size). + + 4KB For best 32bit compatibility + 16KB For best performance + 64KB For best performance, might give more overhead. + + If you don't know what to do, choose 4KB. + +config PARISC_PAGE_SIZE_16KB + bool "16KB (EXPERIMENTAL)" + depends on PA8X00 && EXPERIMENTAL + +config PARISC_PAGE_SIZE_64KB + bool "64KB (EXPERIMENTAL)" + depends on PA8X00 && EXPERIMENTAL + +endchoice + config SMP bool "Symmetric multi-processing support" ---help--- diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c index e23c4e1e3a25..c11a5bc7c067 100644 --- a/arch/parisc/kernel/asm-offsets.c +++ b/arch/parisc/kernel/asm-offsets.c @@ -288,8 +288,11 @@ int main(void) DEFINE(ASM_PGD_ENTRY_SIZE, PGD_ENTRY_SIZE); DEFINE(ASM_PMD_ENTRY_SIZE, PMD_ENTRY_SIZE); DEFINE(ASM_PTE_ENTRY_SIZE, PTE_ENTRY_SIZE); + DEFINE(ASM_PFN_PTE_SHIFT, PFN_PTE_SHIFT); DEFINE(ASM_PT_INITIAL, PT_INITIAL); DEFINE(ASM_PAGE_SIZE, PAGE_SIZE); + DEFINE(ASM_PAGE_SIZE_DIV64, PAGE_SIZE/64); + DEFINE(ASM_PAGE_SIZE_DIV128, PAGE_SIZE/128); BLANK(); DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip)); DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space)); diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 7c95d7663c29..d9e53cf0372b 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -502,18 +502,20 @@ * all ILP32 processes and all the kernel for machines with * under 4GB of memory) */ .macro L3_ptep pgd,pte,index,va,fault +#if PT_NLEVELS == 3 /* we might have a 2-Level scheme, e.g. with 16kb page size */ extrd,u \va,63-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index copy %r0,\pte - extrd,u,*= \va,31,32,%r0 + extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 ldw,s \index(\pgd),\pgd - extrd,u,*= \va,31,32,%r0 + extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 bb,>=,n \pgd,_PxD_PRESENT_BIT,\fault - extrd,u,*= \va,31,32,%r0 + extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 shld \pgd,PxD_VALUE_SHIFT,\index - extrd,u,*= \va,31,32,%r0 + extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 copy \index,\pgd - extrd,u,*<> \va,31,32,%r0 + extrd,u,*<> \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 ldo ASM_PGD_PMD_OFFSET(\pgd),\pgd +#endif L2_ptep \pgd,\pte,\index,\va,\fault .endm @@ -563,10 +565,18 @@ extrd,u,*= \pte,_PAGE_GATEWAY_BIT+32,1,%r0 depd %r0,11,2,\prot /* If Gateway, Set PL2 to 0 */ - /* Get rid of prot bits and convert to page addr for iitlbt and idtlbt */ + /* Enforce uncacheable pages. + * This should ONLY be use for MMIO on PA 2.0 machines. + * Memory/DMA is cache coherent on all PA2.0 machines we support + * (that means T-class is NOT supported) and the memory controllers + * on most of those machines only handles cache transactions. + */ + extrd,u,*= \pte,_PAGE_NO_CACHE_BIT+32,1,%r0 + depi 1,12,1,\prot - depd %r0,63,PAGE_SHIFT,\pte - extrd,s \pte,(63-PAGE_SHIFT)+(63-58),64-PAGE_SHIFT,\pte + /* Drop prot bits and convert to page addr for iitlbt and idtlbt */ + extrd,u \pte,(63-ASM_PFN_PTE_SHIFT)+(63-58),64-PAGE_SHIFT,\pte + depdi _PAGE_SIZE_ENCODING_DEFAULT,63,63-58,\pte .endm /* Identical macro to make_insert_tlb above, except it @@ -584,9 +594,8 @@ /* Get rid of prot bits and convert to page addr for iitlba */ - depi 0,31,PAGE_SHIFT,\pte + depi _PAGE_SIZE_ENCODING_DEFAULT,31,ASM_PFN_PTE_SHIFT,\pte extru \pte,24,25,\pte - .endm /* This is for ILP32 PA2.0 only. The TLB insertion needs @@ -1201,10 +1210,9 @@ intr_save: */ /* adjust isr/ior. */ - - extrd,u %r16,63,7,%r1 /* get high bits from isr for ior */ - depd %r1,31,7,%r17 /* deposit them into ior */ - depdi 0,63,7,%r16 /* clear them from isr */ + extrd,u %r16,63,SPACEID_SHIFT,%r1 /* get high bits from isr for ior */ + depd %r1,31,SPACEID_SHIFT,%r17 /* deposit them into ior */ + depdi 0,63,SPACEID_SHIFT,%r16 /* clear them from isr */ #endif STREG %r16, PT_ISR(%r29) STREG %r17, PT_IOR(%r29) diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 0b47afc20690..3e79e62f7b0b 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -76,16 +76,16 @@ $bss_loop: mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ -#ifdef CONFIG_64BIT +#if PT_NLEVELS == 3 /* Set pmd in pgd */ load32 PA(pmd0),%r5 shrd %r5,PxD_VALUE_SHIFT,%r3 - ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 + ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 stw %r3,ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4) ldo ASM_PMD_ENTRY*ASM_PMD_ENTRY_SIZE(%r5),%r4 #else /* 2-level page table, so pmd == pgd */ - ldo ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4),%r4 + ldo ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4),%r4 #endif /* Fill in pmd with enough pte directories */ @@ -99,7 +99,7 @@ $bss_loop: stw %r3,0(%r4) ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 addib,> -1,%r1,1b -#ifdef CONFIG_64BIT +#if PT_NLEVELS == 3 ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 #else ldo ASM_PGD_ENTRY_SIZE(%r4),%r4 @@ -107,13 +107,14 @@ $bss_loop: /* Now initialize the PTEs themselves */ - ldo _PAGE_KERNEL(%r0),%r3 /* Hardwired 0 phys addr start */ + ldo 0+_PAGE_KERNEL(%r0),%r3 /* Hardwired 0 phys addr start */ + ldi (1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */ load32 PA(pg0),%r1 $pgt_fill_loop: STREGM %r3,ASM_PTE_ENTRY_SIZE(%r1) - ldo ASM_PAGE_SIZE(%r3),%r3 - bb,>= %r3,31-KERNEL_INITIAL_ORDER,$pgt_fill_loop + ldo (1< -1,%r11,$pgt_fill_loop nop /* Load the return address...er...crash 'n burn */ diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c index 7e898fd64415..8384bf9cecd2 100644 --- a/arch/parisc/kernel/init_task.c +++ b/arch/parisc/kernel/init_task.c @@ -53,17 +53,17 @@ union thread_union init_thread_union __attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) = { INIT_THREAD_INFO(init_task) }; -#ifdef __LP64__ +#if PT_NLEVELS == 3 /* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout * with the first pmd adjacent to the pgd and below it. gcc doesn't actually * guarantee that global objects will be laid out in memory in the same order * as the order of declaration, so put these in different sections and use * the linker script to order them. */ -pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pmd"))) = { {0}, }; - +pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data.vm0.pmd"), aligned(PAGE_SIZE))); #endif -pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pgd"))) = { {0}, }; -pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pte"))) = { {0}, }; + +pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data.vm0.pgd"), aligned(PAGE_SIZE))); +pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data.vm0.pte"), aligned(PAGE_SIZE))); /* * Initial task structure. diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 7a4f07e8d3c3..f600556414d1 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -65,7 +65,7 @@ flush_tlb_all_local: */ /* pcxt_ssm_bug - relied upon translation! PA 2.0 Arch. F-4 and F-5 */ - rsm PSW_SM_I, %r19 /* save I-bit state */ + rsm PSW_SM_I, %r19 /* save I-bit state */ load32 PA(1f), %r1 nop nop @@ -84,8 +84,7 @@ flush_tlb_all_local: rfi nop -1: ldil L%PA(cache_info), %r1 - ldo R%PA(cache_info)(%r1), %r1 +1: load32 PA(cache_info), %r1 /* Flush Instruction Tlb */ @@ -212,8 +211,7 @@ flush_instruction_cache_local: .entry mtsp %r0, %sr1 - ldil L%cache_info, %r1 - ldo R%cache_info(%r1), %r1 + load32 cache_info, %r1 /* Flush Instruction Cache */ @@ -254,8 +252,7 @@ flush_data_cache_local: .entry mtsp %r0, %sr1 - ldil L%cache_info, %r1 - ldo R%cache_info(%r1), %r1 + load32 cache_info, %r1 /* Flush Data Cache */ @@ -303,7 +300,8 @@ copy_user_page_asm: */ ldd 0(%r25), %r19 - ldi 32, %r1 /* PAGE_SIZE/128 == 32 */ + ldi ASM_PAGE_SIZE_DIV128, %r1 + ldw 64(%r25), %r0 /* prefetch 1 cacheline ahead */ ldw 128(%r25), %r0 /* prefetch 2 */ @@ -368,7 +366,7 @@ copy_user_page_asm: * use ldd/std on a 32 bit kernel. */ ldw 0(%r25), %r19 - ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ + ldi ASM_PAGE_SIZE_DIV64, %r1 1: ldw 4(%r25), %r20 @@ -461,6 +459,7 @@ copy_user_page_asm: sub %r25, %r1, %r23 /* move physical addr into non shadowed reg */ ldil L%(TMPALIAS_MAP_START), %r28 + /* FIXME for different page sizes != 4k */ #ifdef CONFIG_64BIT extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */ extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */ @@ -551,6 +550,7 @@ __clear_user_page_asm: #ifdef CONFIG_64BIT #if (TMPALIAS_MAP_START >= 0x80000000) depdi 0, 31,32, %r28 /* clear any sign extension */ + /* FIXME: page size dependend */ #endif extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ @@ -566,10 +566,10 @@ __clear_user_page_asm: pdtlb 0(%r28) #ifdef CONFIG_64BIT - ldi 32, %r1 /* PAGE_SIZE/128 == 32 */ + ldi ASM_PAGE_SIZE_DIV128, %r1 /* PREFETCH (Write) has not (yet) been proven to help here */ -/* #define PREFETCHW_OP ldd 256(%0), %r0 */ + /* #define PREFETCHW_OP ldd 256(%0), %r0 */ 1: std %r0, 0(%r28) std %r0, 8(%r28) @@ -591,8 +591,7 @@ __clear_user_page_asm: ldo 128(%r28), %r28 #else /* ! CONFIG_64BIT */ - - ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ + ldi ASM_PAGE_SIZE_DIV64, %r1 1: stw %r0, 0(%r28) diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index af88afef41bd..479d9a017cd1 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -55,7 +55,7 @@ * pointers. */ - .align 4096 + .align ASM_PAGE_SIZE linux_gateway_page: /* ADDRESS 0x00 to 0xb0 = 176 bytes / 4 bytes per insn = 44 insns */ @@ -632,7 +632,7 @@ cas_action: end_compare_and_swap: /* Make sure nothing else is placed on this page */ - .align 4096 + .align ASM_PAGE_SIZE .export end_linux_gateway_page end_linux_gateway_page: @@ -652,7 +652,7 @@ end_linux_gateway_page: .section .rodata,"a" - .align 4096 + .align ASM_PAGE_SIZE /* Light-weight-syscall table */ /* Start of lws table. */ .export lws_table @@ -662,14 +662,14 @@ lws_table: LWS_ENTRY(compare_and_swap64) /* 1 - ELF64 Atomic compare and swap */ /* End of lws table */ - .align 4096 + .align ASM_PAGE_SIZE .export sys_call_table .Lsys_call_table: sys_call_table: #include "syscall_table.S" #ifdef CONFIG_64BIT - .align 4096 + .align ASM_PAGE_SIZE .export sys_call_table64 .Lsys_call_table64: sys_call_table64: diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 6d6436a6b624..94dcc03a28ed 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -6,6 +6,7 @@ * Copyright (C) 2000 Michael Ang * Copyright (C) 2002 Randolph Chung * Copyright (C) 2003 James Bottomley + * Copyright (C) 2006 Helge Deller * * * This program is free software; you can redistribute it and/or modify @@ -27,6 +28,7 @@ /* needed for the processor specific cache alignment size */ #include #include +#include /* ld script to make hppa Linux kernel */ #ifndef CONFIG_64BIT @@ -68,7 +70,7 @@ SECTIONS RODATA /* writeable */ - . = ALIGN(4096); /* Make sure this is page aligned so + . = ALIGN(ASM_PAGE_SIZE); /* Make sure this is page aligned so that we can properly leave these as writable */ data_start = .; @@ -81,23 +83,17 @@ SECTIONS __start___unwind = .; /* unwind info */ .PARISC.unwind : { *(.PARISC.unwind) } __stop___unwind = .; - + + /* rarely changed data like cpu maps */ + . = ALIGN(16); + .data.read_mostly : { *(.data.read_mostly) } + + . = ALIGN(L1_CACHE_BYTES); .data : { /* Data */ *(.data) - *(.data.vm0.pmd) - *(.data.vm0.pgd) - *(.data.vm0.pte) CONSTRUCTORS } - . = ALIGN(4096); - /* nosave data is really only used for software suspend...it's here - * just in case we ever implement it */ - __nosave_begin = .; - .data_nosave : { *(.data.nosave) } - . = ALIGN(4096); - __nosave_end = .; - . = ALIGN(L1_CACHE_BYTES); .data.cacheline_aligned : { *(.data.cacheline_aligned) } @@ -105,12 +101,29 @@ SECTIONS . = ALIGN(16); .data.lock_aligned : { *(.data.lock_aligned) } - /* rarely changed data like cpu maps */ - . = ALIGN(16); - .data.read_mostly : { *(.data.read_mostly) } + . = ALIGN(ASM_PAGE_SIZE); + /* nosave data is really only used for software suspend...it's here + * just in case we ever implement it */ + __nosave_begin = .; + .data_nosave : { *(.data.nosave) } + . = ALIGN(ASM_PAGE_SIZE); + __nosave_end = .; _edata = .; /* End of data section */ + __bss_start = .; /* BSS */ + /* page table entries need to be PAGE_SIZE aligned */ + . = ALIGN(ASM_PAGE_SIZE); + .data.vmpages : { + *(.data.vm0.pmd) + *(.data.vm0.pgd) + *(.data.vm0.pte) + } + .bss : { *(.bss) *(COMMON) } + __bss_stop = .; + + + /* assembler code expects init_task to be 16k aligned */ . = ALIGN(16384); /* init_task */ .data.init_task : { *(.data.init_task) } @@ -126,6 +139,7 @@ SECTIONS .dlt : { *(.dlt) } #endif + /* reserve space for interrupt stack by aligning __init* to 16k */ . = ALIGN(16384); __init_begin = .; .init.text : { @@ -166,7 +180,7 @@ SECTIONS from .altinstructions and .eh_frame */ .exit.text : { *(.exit.text) } .exit.data : { *(.exit.data) } - . = ALIGN(4096); + . = ALIGN(ASM_PAGE_SIZE); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; @@ -174,14 +188,10 @@ SECTIONS __per_cpu_start = .; .data.percpu : { *(.data.percpu) } __per_cpu_end = .; - . = ALIGN(4096); + . = ALIGN(ASM_PAGE_SIZE); __init_end = .; /* freed after init ends here */ - __bss_start = .; /* BSS */ - .bss : { *(.bss) *(COMMON) } - __bss_stop = .; - _end = . ; /* Sections to be discarded */ diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 3796be67cd53..631712562656 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -6,6 +6,7 @@ * changed by Philipp Rumpf * Copyright 1999 Philipp Rumpf (prumpf@tux.org) * Copyright 2004 Randolph Chung (tausq@debian.org) + * Copyright 2006 Helge Deller (deller@gmx.de) * */ @@ -371,8 +372,8 @@ static void __init setup_bootmem(void) void free_initmem(void) { - unsigned long addr; - + unsigned long addr, init_begin, init_end; + printk(KERN_INFO "Freeing unused kernel memory: "); #ifdef CONFIG_DEBUG_KERNEL @@ -395,8 +396,11 @@ void free_initmem(void) local_irq_enable(); #endif - addr = (unsigned long)(&__init_begin); - for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { + /* align __init_begin and __init_end to page size, + ignoring linker script where we might have tried to save RAM */ + init_begin = PAGE_ALIGN((unsigned long)(&__init_begin)); + init_end = PAGE_ALIGN((unsigned long)(&__init_end)); + for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); free_page(addr); @@ -407,7 +411,7 @@ void free_initmem(void) /* set up a new led state on systems shipped LED State panel */ pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE); - printk("%luk freed\n", (unsigned long)(&__init_end - &__init_begin) >> 10); + printk("%luk freed\n", (init_end - init_begin) >> 10); } @@ -639,11 +643,13 @@ static void __init map_pages(unsigned long start_vaddr, unsigned long start_padd * Map the fault vector writable so we can * write the HPMC checksum. */ +#if defined(CONFIG_PARISC_PAGE_SIZE_4KB) if (address >= ro_start && address < ro_end && address != fv_addr && address != gw_addr) pte = __mk_pte(address, PAGE_KERNEL_RO); else +#endif pte = __mk_pte(address, pgprot); if (address >= end_paddr) @@ -874,8 +880,7 @@ unsigned long alloc_sid(void) flush_tlb_all(); /* flush_tlb_all() calls recycle_sids() */ spin_lock(&sid_lock); } - if (free_space_ids == 0) - BUG(); + BUG_ON(free_space_ids == 0); } free_space_ids--; @@ -899,8 +904,7 @@ void free_sid(unsigned long spaceid) spin_lock(&sid_lock); - if (*dirty_space_offset & (1L << index)) - BUG(); /* attempt to free space id twice */ + BUG_ON(*dirty_space_offset & (1L << index)); /* attempt to free space id twice */ *dirty_space_offset |= (1L << index); dirty_space_ids++; @@ -975,7 +979,7 @@ static void recycle_sids(void) static unsigned long recycle_ndirty; static unsigned long recycle_dirty_array[SID_ARRAY_SIZE]; -static unsigned int recycle_inuse = 0; +static unsigned int recycle_inuse; void flush_tlb_all(void) { @@ -984,9 +988,7 @@ void flush_tlb_all(void) do_recycle = 0; spin_lock(&sid_lock); if (dirty_space_ids > RECYCLE_THRESHOLD) { - if (recycle_inuse) { - BUG(); /* FIXME: Use a semaphore/wait queue here */ - } + BUG_ON(recycle_inuse); /* FIXME: Use a semaphore/wait queue here */ get_dirty_sids(&recycle_ndirty,recycle_dirty_array); recycle_inuse++; do_recycle++; diff --git a/include/asm-parisc/page.h b/include/asm-parisc/page.h index 45e02aa5bf4b..c0dd461fb8f1 100644 --- a/include/asm-parisc/page.h +++ b/include/asm-parisc/page.h @@ -1,13 +1,30 @@ #ifndef _PARISC_PAGE_H #define _PARISC_PAGE_H -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) +#if !defined(__KERNEL__) +/* this is for userspace applications (4k page size) */ +# define PAGE_SHIFT 12 /* 4k */ +# define PAGE_SIZE (1UL << PAGE_SHIFT) +# define PAGE_MASK (~(PAGE_SIZE-1)) +#endif + #ifdef __KERNEL__ #include + +#if defined(CONFIG_PARISC_PAGE_SIZE_4KB) +# define PAGE_SHIFT 12 /* 4k */ +#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB) +# define PAGE_SHIFT 14 /* 16k */ +#elif defined(CONFIG_PARISC_PAGE_SIZE_64KB) +# define PAGE_SHIFT 16 /* 64k */ +#else +# error "unknown default kernel page size" +#endif +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + + #ifndef __ASSEMBLY__ #include diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h index 4e34c6b44059..aec089eb8b85 100644 --- a/include/asm-parisc/pgtable.h +++ b/include/asm-parisc/pgtable.h @@ -59,16 +59,15 @@ #define ISTACK_SIZE 32768 /* Interrupt Stack Size */ #define ISTACK_ORDER 3 -/* This is the size of the initially mapped kernel memory (i.e. currently - * 0 to 1<<23 == 8MB */ +/* This is the size of the initially mapped kernel memory */ #ifdef CONFIG_64BIT -#define KERNEL_INITIAL_ORDER 24 +#define KERNEL_INITIAL_ORDER 24 /* 0 to 1<<24 = 16MB */ #else -#define KERNEL_INITIAL_ORDER 23 +#define KERNEL_INITIAL_ORDER 23 /* 0 to 1<<23 = 8MB */ #endif #define KERNEL_INITIAL_SIZE (1 << KERNEL_INITIAL_ORDER) -#ifdef CONFIG_64BIT +#if defined(CONFIG_64BIT) && defined(CONFIG_PARISC_PAGE_SIZE_4KB) #define PT_NLEVELS 3 #define PGD_ORDER 1 /* Number of pages per pgd */ #define PMD_ORDER 1 /* Number of pages per pmd */ @@ -111,11 +110,15 @@ #define MAX_ADDRBITS (PGDIR_SHIFT + BITS_PER_PGD) #define MAX_ADDRESS (1UL << MAX_ADDRBITS) -#define SPACEID_SHIFT (MAX_ADDRBITS - 32) +#define SPACEID_SHIFT (MAX_ADDRBITS - 32) /* This calculates the number of initial pages we need for the initial * page tables */ -#define PT_INITIAL (1 << (KERNEL_INITIAL_ORDER - PMD_SHIFT)) +#if (KERNEL_INITIAL_ORDER) >= (PMD_SHIFT) +# define PT_INITIAL (1 << (KERNEL_INITIAL_ORDER - PMD_SHIFT)) +#else +# define PT_INITIAL (1) /* all initial PTEs fit into one page */ +#endif /* * pgd entries used up by user/kernel: @@ -160,6 +163,10 @@ extern void *vmalloc_start; * to zero */ #define PTE_SHIFT xlate_pabit(_PAGE_USER_BIT) +/* PFN_PTE_SHIFT defines the shift of a PTE value to access the PFN field */ +#define PFN_PTE_SHIFT 12 + + /* this is how many bits may be used by the file functions */ #define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_SHIFT) @@ -188,7 +195,8 @@ extern void *vmalloc_start; /* The pgd/pmd contains a ptr (in phys addr space); since all pgds/pmds * are page-aligned, we don't care about the PAGE_OFFSET bits, except * for a few meta-information bits, so we shift the address to be - * able to effectively address 40-bits of physical address space. */ + * able to effectively address 40/42/44-bits of physical address space + * depending on 4k/16k/64k PAGE_SIZE */ #define _PxD_PRESENT_BIT 31 #define _PxD_ATTACHED_BIT 30 #define _PxD_VALID_BIT 29 @@ -198,7 +206,7 @@ extern void *vmalloc_start; #define PxD_FLAG_VALID (1 << xlate_pabit(_PxD_VALID_BIT)) #define PxD_FLAG_MASK (0xf) #define PxD_FLAG_SHIFT (4) -#define PxD_VALUE_SHIFT (8) +#define PxD_VALUE_SHIFT (8) /* (PAGE_SHIFT-PxD_FLAG_SHIFT) */ #ifndef __ASSEMBLY__ @@ -246,6 +254,7 @@ extern void *vmalloc_start; #define __S110 PAGE_RWX #define __S111 PAGE_RWX + extern pgd_t swapper_pg_dir[]; /* declared in init_task.c */ /* initial page tables for 0-8MB for kernel */ @@ -272,7 +281,7 @@ extern unsigned long *empty_zero_page; #define pgd_flag(x) (pgd_val(x) & PxD_FLAG_MASK) #define pgd_address(x) ((unsigned long)(pgd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT) -#ifdef CONFIG_64BIT +#if PT_NLEVELS == 3 /* The first entry of the permanent pmd is not there if it contains * the gateway marker */ #define pmd_none(x) (!pmd_val(x) || pmd_flag(x) == PxD_FLAG_ATTACHED) @@ -282,7 +291,7 @@ extern unsigned long *empty_zero_page; #define pmd_bad(x) (!(pmd_flag(x) & PxD_FLAG_VALID)) #define pmd_present(x) (pmd_flag(x) & PxD_FLAG_PRESENT) static inline void pmd_clear(pmd_t *pmd) { -#ifdef CONFIG_64BIT +#if PT_NLEVELS == 3 if (pmd_flag(*pmd) & PxD_FLAG_ATTACHED) /* This is the entry pointing to the permanent pmd * attached to the pgd; cannot clear it */ @@ -303,7 +312,7 @@ static inline void pmd_clear(pmd_t *pmd) { #define pgd_bad(x) (!(pgd_flag(x) & PxD_FLAG_VALID)) #define pgd_present(x) (pgd_flag(x) & PxD_FLAG_PRESENT) static inline void pgd_clear(pgd_t *pgd) { -#ifdef CONFIG_64BIT +#if PT_NLEVELS == 3 if(pgd_flag(*pgd) & PxD_FLAG_ATTACHED) /* This is the permanent pmd attached to the pgd; cannot * free it */ @@ -351,7 +360,7 @@ extern inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= _PAGE_WRITE; return ({ \ pte_t __pte; \ \ - pte_val(__pte) = ((addr)+pgprot_val(pgprot)); \ + pte_val(__pte) = ((((addr)>>PAGE_SHIFT)<> PAGE_SHIFT) +#define pte_pfn(x) (pte_val(x) >> PFN_PTE_SHIFT) #define pte_page(pte) (pfn_to_page(pte_pfn(pte))) @@ -499,6 +504,26 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, #endif /* !__ASSEMBLY__ */ + +/* TLB page size encoding - see table 3-1 in parisc20.pdf */ +#define _PAGE_SIZE_ENCODING_4K 0 +#define _PAGE_SIZE_ENCODING_16K 1 +#define _PAGE_SIZE_ENCODING_64K 2 +#define _PAGE_SIZE_ENCODING_256K 3 +#define _PAGE_SIZE_ENCODING_1M 4 +#define _PAGE_SIZE_ENCODING_4M 5 +#define _PAGE_SIZE_ENCODING_16M 6 +#define _PAGE_SIZE_ENCODING_64M 7 + +#if defined(CONFIG_PARISC_PAGE_SIZE_4KB) +# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_4K +#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB) +# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_16K +#elif defined(CONFIG_PARISC_PAGE_SIZE_64KB) +# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_64K +#endif + + #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ remap_pfn_range(vma, vaddr, pfn, size, prot) From 6ca773cf8b9dc19989c9b44635292b1ba80f9112 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Thu, 20 Apr 2006 04:44:07 +0000 Subject: [PATCH 020/160] [PARISC] Add new entries to the syscall table Most are easy, but sync_file_range needed special handling when entering through the 32-bit syscall table. Signed-off-by: Kyle McMartin --- arch/parisc/kernel/sys_parisc.c | 8 ++++++++ arch/parisc/kernel/syscall_table.S | 8 +++++++- include/asm-parisc/unistd.h | 8 +++++++- 3 files changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index d15a1d53e101..8b5df98e2b31 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -231,6 +231,14 @@ asmlinkage long parisc_fadvise64_64(int fd, (loff_t)high_len << 32 | low_len, advice); } +asmlinkage long parisc_sync_file_range(int fd, + u32 hi_off, u32 lo_off, u32 hi_nbytes, u32 lo_nbytes, + unsigned int flags) +{ + return sys_sync_file_range(fd, (loff_t)hi_off << 32 | lo_off, + (loff_t)hi_nbytes << 32 | lo_nbytes, flags); +} + asmlinkage unsigned long sys_alloc_hugepages(int key, unsigned long addr, unsigned long len, int prot, int flag) { return -ENOMEM; diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index bbeeb614cfab..e27b432f90a8 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -13,7 +13,7 @@ * Copyright (C) 2001 Helge Deller * Copyright (C) 2000-2001 Thomas Bogendoerfer * Copyright (C) 2002 Randolph Chung - * + * Copyright (C) 2005-2006 Kyle McMartin * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -393,5 +393,11 @@ ENTRY_SAME(readlinkat) /* 285 */ ENTRY_SAME(fchmodat) ENTRY_SAME(faccessat) + ENTRY_SAME(unshare) + ENTRY_COMP(set_robust_list) + ENTRY_COMP(get_robust_list) /* 290 */ + ENTRY_SAME(splice) + ENTRY_OURS(sync_file_range) + ENTRY_SAME(tee) /* Nothing yet */ diff --git a/include/asm-parisc/unistd.h b/include/asm-parisc/unistd.h index c56fccbf34ad..0e1a30be2e30 100644 --- a/include/asm-parisc/unistd.h +++ b/include/asm-parisc/unistd.h @@ -780,8 +780,14 @@ #define __NR_readlinkat (__NR_Linux + 285) #define __NR_fchmodat (__NR_Linux + 286) #define __NR_faccessat (__NR_Linux + 287) +#define __NR_unshare (__NR_Linux + 288) +#define __NR_set_robust_list (__NR_Linux + 289) +#define __NR_get_robust_list (__NR_Linux + 290) +#define __NR_splice (__NR_Linux + 291) +#define __NR_sync_file_range (__NR_Linux + 292) +#define __NR_tee (__NR_Linux + 293) -#define __NR_Linux_syscalls 288 +#define __NR_Linux_syscalls 294 #define HPUX_GATEWAY_ADDR 0xC0000004 #define LINUX_GATEWAY_ADDR 0x100 From 1b52d7c2210b9a64c5cba6aded478c8217a8853c Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Thu, 20 Apr 2006 21:16:32 +0000 Subject: [PATCH 021/160] [PARISC] Make ioremap default to _nocache Since it is way more work to change most drivers to comply with parisc, take the easy way out and make ioremap _NO_CACHE by default. This is in line with what powerpc does. Signed-off-by: Kyle McMartin --- include/asm-parisc/io.h | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/include/asm-parisc/io.h b/include/asm-parisc/io.h index 29da31194b91..244f6b8883f4 100644 --- a/include/asm-parisc/io.h +++ b/include/asm-parisc/io.h @@ -126,24 +126,17 @@ static inline void gsc_writeq(unsigned long long val, unsigned long addr) extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); +/* Most machines react poorly to I/O-space being cacheable... Instead let's + * define ioremap() in terms of ioremap_nocache(). + */ extern inline void __iomem * ioremap(unsigned long offset, unsigned long size) { - return __ioremap(offset, size, 0); -} - -/* - * This one maps high address device memory and turns off caching for that area. - * it's useful if some control registers are in such an area and write combining - * or read caching is not desirable: - */ -extern inline void * ioremap_nocache(unsigned long offset, unsigned long size) -{ - return __ioremap(offset, size, _PAGE_NO_CACHE /* _PAGE_PCD */); + return __ioremap(offset, size, _PAGE_NO_CACHE); } +#define ioremap_nocache(off, sz) ioremap((off), (sz)) extern void iounmap(void __iomem *addr); - static inline unsigned char __raw_readb(const volatile void __iomem *addr) { return (*(volatile unsigned char __force *) (addr)); From 223232de068593b40d267e340f24c017d31c018a Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 21 Apr 2006 16:54:23 -0400 Subject: [PATCH 022/160] [PARISC] MAINTAINERS Add myself to maintainers and add the parisc trees. Acked-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 61060e82fb0e..4e1e8175eb6d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2065,8 +2065,12 @@ P: Matthew Wilcox M: matthew@wil.cx P: Grant Grundler M: grundler@parisc-linux.org +P: Kyle McMartin +M: kyle@parisc-linux.org L: parisc-linux@parisc-linux.org W: http://www.parisc-linux.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git +T: cvs cvs.parisc-linux.org:/var/cvs/linux-2.6 S: Maintained PCI ERROR RECOVERY From 6542729809baa3674b16a76a68346f449266c6dd Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 4 Apr 2006 10:17:52 +0200 Subject: [PATCH 023/160] [PATCH] pcmcia: add new ID to pcnet_cs This adds a new ID to pcnet_cs, as noted by Kuro Moji. Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/pcnet_cs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 506e777c5f06..d090df413049 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1639,6 +1639,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722), PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd), + PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d), PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9), From 6171b88b436ceb91d602ca570e63a0dcdd56648e Mon Sep 17 00:00:00 2001 From: Komuro Date: Sun, 2 Apr 2006 17:39:27 +0900 Subject: [PATCH 024/160] [PATCH] pcmcia: unload second device first Use list_add instead of list_add_tail for pcmcia_device_add so that second device of multi-function-card will be unloaded first. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Dominik Brodowski --- drivers/pcmcia/ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index ae10d1eed65e..7582362a38c3 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -628,7 +628,7 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f } /* Add to the list in pcmcia_bus_socket */ - list_add_tail(&p_dev->socket_device_list, &s->devices_list); + list_add(&p_dev->socket_device_list, &s->devices_list); spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags); From 90ff87008df12da7f2486178d0dee13745c1de6b Mon Sep 17 00:00:00 2001 From: Komuro Date: Sun, 12 Mar 2006 11:32:07 +0900 Subject: [PATCH 025/160] [PATCH] pcmcia: fix comment for pcmcia_load_firmware The comment of "pcmcia_load_firmware" is wrong: the firmware(*.cis) files reside in /lib/firmware/ _not_ /lib/firmware/cis/ . Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Dominik Brodowski --- drivers/pcmcia/ds.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 7582362a38c3..7b7428c77d7a 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -236,11 +236,11 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv) /** * pcmcia_load_firmware - load CIS from userspace if device-provided is broken * @dev - the pcmcia device which needs a CIS override - * @filename - requested filename in /lib/firmware/cis/ + * @filename - requested filename in /lib/firmware/ * * This uses the in-kernel firmware loading mechanism to use a "fake CIS" if * the one provided by the card is broken. The firmware files reside in - * /lib/firmware/cis/ in userspace. + * /lib/firmware/ in userspace. */ static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename) { From a0aab14322a74ab5665704c6155bf48fbc38f445 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 4 Apr 2006 11:09:26 +0200 Subject: [PATCH 026/160] [PATCH] pcmcia: do not set dev_node to NULL too early If we set dev_node to NULL too early, some drivers which used this to determine whether unregister_netdev() needs to be called fail when removing a PCMCIA card. Signed-off-by: Dominik Brodowski --- drivers/pcmcia/ds.c | 2 ++ drivers/pcmcia/pcmcia_resource.c | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 7b7428c77d7a..0f98cab35186 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -476,6 +476,8 @@ static int pcmcia_device_remove(struct device * dev) if (p_drv->remove) p_drv->remove(p_dev); + p_dev->dev_node = NULL; + /* check for proper unloading */ if (p_dev->_irq || p_dev->_io || p_dev->_locked) printk(KERN_INFO "pcmcia: driver %s did not release config properly\n", diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 45063b4e5b78..2539c0b23062 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -947,7 +947,5 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev) { pcmcia_release_irq(p_dev, &p_dev->irq); if (&p_dev->win) pcmcia_release_window(p_dev->win); - - p_dev->dev_node = NULL; } EXPORT_SYMBOL(pcmcia_disable_device); From 80a55e923c76e022de298929e0c09bcca5c247d9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 10 Apr 2006 23:24:57 -0700 Subject: [PATCH 027/160] [PATCH] pcmcia: remove unneeded forward declarations Also remove a couple of unneeded typecasts. Signed-off-by: Andrew Morton Signed-off-by: Dominik Brodowski --- drivers/pcmcia/ds.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 0f98cab35186..48d3b3d30c21 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -298,9 +298,6 @@ static inline int pcmcia_load_firmware(struct pcmcia_device *dev, char * filenam * * Registers a PCMCIA driver with the PCMCIA bus core. */ -static int pcmcia_device_probe(struct device *dev); -static int pcmcia_device_remove(struct device * dev); - int pcmcia_register_driver(struct pcmcia_driver *driver) { if (!driver) @@ -400,7 +397,7 @@ static int pcmcia_device_probe(struct device * dev) * call which will then check whether there are two * pseudo devices, and if not, add the second one. */ - did = (struct pcmcia_device_id *) p_dev->dev.driver_data; + did = p_dev->dev.driver_data; if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) && (p_dev->socket->device_count == 1) && (p_dev->device_no == 0)) pcmcia_add_pseudo_device(p_dev->socket); @@ -448,7 +445,6 @@ static void pcmcia_card_remove(struct pcmcia_socket *s, struct pcmcia_device *le return; } - static int pcmcia_device_remove(struct device * dev) { struct pcmcia_device *p_dev; @@ -463,7 +459,7 @@ static int pcmcia_device_remove(struct device * dev) * pseudo multi-function card, we need to unbind * all devices */ - did = (struct pcmcia_device_id *) p_dev->dev.driver_data; + did = p_dev->dev.driver_data; if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) && (p_dev->socket->device_count != 0) && (p_dev->device_no == 0)) From 2aff541c691b28cecb95ce710c367d16c0a84d8c Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 13 Apr 2006 19:06:49 +0200 Subject: [PATCH 028/160] [PATCH] pcmcia: fix oops in static mapping case As static maps do not have IO resources, this setting oopses. However, as we do not ever read this value, we can safely remove it. Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pcmcia_resource.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 2539c0b23062..cc3402c9b2c3 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -88,7 +88,6 @@ static int alloc_io_space(struct pcmcia_socket *s, u_int attr, ioaddr_t *base, } if ((s->features & SS_CAP_STATIC_MAP) && s->io_offset) { *base = s->io_offset | (*base & 0x0fff); - s->io[0].res->flags = (s->io[0].res->flags & ~IORESOURCE_BITS) | (attr & IORESOURCE_BITS); return 0; } /* Check for an already-allocated window that must conflict with From daaeb72bdf22873e6fa6497550c9e1d9a8825fea Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 6 Apr 2006 15:08:29 +0900 Subject: [PATCH 029/160] [PATCH] vrc4171: update config This patch updates "depends on" for PCMCIA_VRC4171. CONFIG_VRC4171 has been removed, so replace it with CPU_VR41XX && ISA. Signed-off-by: Yoichi Yuasa Signed-off-by: Dominik Brodowski --- drivers/pcmcia/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index cba6c9eef28e..61cb4b29f55c 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -250,7 +250,7 @@ config M32R_CFC_NUM config PCMCIA_VRC4171 tristate "NEC VRC4171 Card Controllers support" - depends on VRC4171 && PCMCIA + depends on CPU_VR41XX && ISA && PCMCIA config PCMCIA_VRC4173 tristate "NEC VRC4173 CARDU support" From 48b950ff241fca03a6969a5eb6a42a02722678d4 Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Fri, 14 Apr 2006 17:42:13 +0200 Subject: [PATCH 030/160] [PATCH] pcmcia/pcmcia_resource.c: fix crash when using Cardbus cards Using the old ioctl interface together with cardbus card gives a NULL pointer dereference since cardbus devices don't have a struct pcmcia_device. also s->io[0].res can be NULL as well. Fix is to move the pcmcia code after the cardbus code and to check for a null pointer. Signed-off-by: Daniel Ritz Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pcmcia_resource.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index cc3402c9b2c3..3131bb0a0095 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -208,7 +208,6 @@ int pccard_get_configuration_info(struct pcmcia_socket *s, if (!(s->state & SOCKET_PRESENT)) return CS_NO_CARD; - config->Function = p_dev->func; #ifdef CONFIG_CARDBUS if (s->state & SOCKET_CARDBUS) { @@ -222,14 +221,22 @@ int pccard_get_configuration_info(struct pcmcia_socket *s, config->AssignedIRQ = s->irq.AssignedIRQ; if (config->AssignedIRQ) config->Attributes |= CONF_ENABLE_IRQ; - config->BasePort1 = s->io[0].res->start; - config->NumPorts1 = s->io[0].res->end - config->BasePort1 + 1; + if (s->io[0].res) { + config->BasePort1 = s->io[0].res->start; + config->NumPorts1 = s->io[0].res->end - config->BasePort1 + 1; + } } return CS_SUCCESS; } #endif - c = (p_dev) ? p_dev->function_config : NULL; + if (p_dev) { + c = p_dev->function_config; + config->Function = p_dev->func; + } else { + c = NULL; + config->Function = 0; + } if ((c == NULL) || !(c->state & CONFIG_LOCKED)) { config->Attributes = 0; From 45af7a0f2ebad1304cab956e15f0b37318226fcd Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 21 Apr 2006 22:52:25 +0000 Subject: [PATCH 031/160] [CIFS] Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. It does not move the cifsd thread handling to kthread due to problems found in testing with wakeup of threads blocked in the socket peek api, but the other cifs kernel threads now use kthread. Also cleanup cifs_init to properly unwind when thread creation fails. Signed-off-by: Christoph Hellwig Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 99 ++++++++++++++++++++++++------------------------ 1 file changed, 50 insertions(+), 49 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index d4b713e5affb..c262d8874ce9 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -33,6 +33,7 @@ #include #include #include +#include #include "cifsfs.h" #include "cifspdu.h" #define DECLARE_GLOBALS_HERE @@ -75,9 +76,6 @@ unsigned int cifs_max_pending = CIFS_MAX_REQ; module_param(cifs_max_pending, int, 0); MODULE_PARM_DESC(cifs_max_pending,"Simultaneous requests to server. Default: 50 Range: 2 to 256"); -static DECLARE_COMPLETION(cifs_oplock_exited); -static DECLARE_COMPLETION(cifs_dnotify_exited); - extern mempool_t *cifs_sm_req_poolp; extern mempool_t *cifs_req_poolp; extern mempool_t *cifs_mid_poolp; @@ -841,10 +839,6 @@ static int cifs_oplock_thread(void * dummyarg) __u16 netfid; int rc; - daemonize("cifsoplockd"); - allow_signal(SIGTERM); - - oplockThread = current; do { if (try_to_freeze()) continue; @@ -900,9 +894,9 @@ static int cifs_oplock_thread(void * dummyarg) set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(1); /* yield in case q were corrupt */ } - } while(!signal_pending(current)); - oplockThread = NULL; - complete_and_exit (&cifs_oplock_exited, 0); + } while (!kthread_should_stop()); + + return 0; } static int cifs_dnotify_thread(void * dummyarg) @@ -910,10 +904,6 @@ static int cifs_dnotify_thread(void * dummyarg) struct list_head *tmp; struct cifsSesInfo *ses; - daemonize("cifsdnotifyd"); - allow_signal(SIGTERM); - - dnotifyThread = current; do { if(try_to_freeze()) continue; @@ -931,8 +921,9 @@ static int cifs_dnotify_thread(void * dummyarg) wake_up_all(&ses->server->response_q); } read_unlock(&GlobalSMBSeslock); - } while(!signal_pending(current)); - complete_and_exit (&cifs_dnotify_exited, 0); + } while (!kthread_should_stop()); + + return 0; } static int __init @@ -982,32 +973,48 @@ init_cifs(void) } rc = cifs_init_inodecache(); - if (!rc) { - rc = cifs_init_mids(); - if (!rc) { - rc = cifs_init_request_bufs(); - if (!rc) { - rc = register_filesystem(&cifs_fs_type); - if (!rc) { - rc = (int)kernel_thread(cifs_oplock_thread, NULL, - CLONE_FS | CLONE_FILES | CLONE_VM); - if(rc > 0) { - rc = (int)kernel_thread(cifs_dnotify_thread, NULL, - CLONE_FS | CLONE_FILES | CLONE_VM); - if(rc > 0) - return 0; - else - cERROR(1,("error %d create dnotify thread", rc)); - } else { - cERROR(1,("error %d create oplock thread",rc)); - } - } - cifs_destroy_request_bufs(); - } - cifs_destroy_mids(); - } - cifs_destroy_inodecache(); + if (rc) + goto out_clean_proc; + + rc = cifs_init_mids(); + if (rc) + goto out_destroy_inodecache; + + rc = cifs_init_request_bufs(); + if (rc) + goto out_destroy_mids; + + rc = register_filesystem(&cifs_fs_type); + if (rc) + goto out_destroy_request_bufs; + + oplockThread = kthread_run(cifs_oplock_thread, NULL, "cifsoplockd"); + if (IS_ERR(oplockThread)) { + rc = PTR_ERR(oplockThread); + cERROR(1,("error %d create oplock thread", rc)); + goto out_unregister_filesystem; } + + dnotifyThread = kthread_run(cifs_dnotify_thread, NULL, "cifsdnotifyd"); + if (IS_ERR(dnotifyThread)) { + rc = PTR_ERR(dnotifyThread); + cERROR(1,("error %d create dnotify thread", rc)); + goto out_stop_oplock_thread; + } + + return 0; + + out_stop_oplock_thread: + kthread_stop(oplockThread); + out_unregister_filesystem: + unregister_filesystem(&cifs_fs_type); + out_destroy_request_bufs: + cifs_destroy_request_bufs(); + out_destroy_mids: + cifs_destroy_mids(); + out_destroy_inodecache: + cifs_destroy_inodecache(); + out_clean_proc: #ifdef CONFIG_PROC_FS cifs_proc_clean(); #endif @@ -1025,14 +1032,8 @@ exit_cifs(void) cifs_destroy_inodecache(); cifs_destroy_mids(); cifs_destroy_request_bufs(); - if(oplockThread) { - send_sig(SIGTERM, oplockThread, 1); - wait_for_completion(&cifs_oplock_exited); - } - if(dnotifyThread) { - send_sig(SIGTERM, dnotifyThread, 1); - wait_for_completion(&cifs_dnotify_exited); - } + kthread_stop(oplockThread); + kthread_stop(dnotifyThread); } MODULE_AUTHOR("Steve French "); From 60808233f374aebba26488d06a5f25443f6763c3 Mon Sep 17 00:00:00 2001 From: Steve French Date: Sat, 22 Apr 2006 15:53:05 +0000 Subject: [PATCH 032/160] [CIFS] Readdir fixes to allow search to start at arbitrary position in directory Also includes first part of fix to compensate for servers which forget to return . and .. as well as updates to changelog and cifs readme. Signed-off-by: Steve French --- fs/cifs/CHANGES | 6 +++++- fs/cifs/README | 8 ++++++++ fs/cifs/cifssmb.c | 2 +- fs/cifs/connect.c | 5 ++++- fs/cifs/file.c | 32 ++++++++++++++++++++------------ fs/cifs/ntlmssp.c | 14 ++++++++++++++ fs/cifs/readdir.c | 43 ++++++++++++++++++++++--------------------- 7 files changed, 74 insertions(+), 36 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 8a2de038882e..1a27ecb46c9a 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -1,7 +1,11 @@ Version 1.42 ------------ Fix slow oplock break when mounted to different servers at the same time and -the tids match and we try to find matching fid on wrong server. +the tids match and we try to find matching fid on wrong server. Fix read +looping when signing required by server (2.6.16 kernel only). Fix readdir +vs. rename race which could cause each to hang. Return . and .. even +if server does not. Allow searches to skip first three entries and +begin at any location. Fix oops in find_writeable_file. Version 1.41 ------------ diff --git a/fs/cifs/README b/fs/cifs/README index b2b4d0803761..0355003f4f0a 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -511,6 +511,14 @@ LinuxExtensionsEnabled If set to one then the client will attempt to support and want to map the uid and gid fields to values supplied at mount (rather than the actual values, then set this to zero. (default 1) +Experimental When set to 1 used to enable certain experimental + features (currently enables multipage writes + when signing is enabled, the multipage write + performance enhancement was disabled when + signing turned on in case buffer was modified + just before it was sent, also this flag will + be used to use the new experimental sessionsetup + code). These experimental features and tracing can be enabled by changing flags in /proc/fs/cifs (after the cifs module has been installed or built into the diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index d705500aa283..fd36892eda55 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3119,7 +3119,7 @@ findFirstRetry: psrch_inf->endOfSearch = FALSE; psrch_inf->entries_in_buffer = le16_to_cpu(parms->SearchCount); - psrch_inf->index_of_last_entry = + psrch_inf->index_of_last_entry = 2 /* skip . and .. */ + psrch_inf->entries_in_buffer; *pnetfid = parms->SearchHandle; } else { diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0b86d5ca9014..aaf151cb5822 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3447,7 +3447,10 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, pSesInfo->server->secMode, pSesInfo->server->capabilities, pSesInfo->server->timeZone)); - if (extended_security + if(experimEnabled > 1) + rc = CIFS_SessSetup(xid, pSesInfo, CIFS_NTLM /* type */, + &ntlmv2_flag, nls_info); + else if (extended_security && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY) && (pSesInfo->server->secType == NTLMSSP)) { cFYI(1, ("New style sesssetup")); diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 1476725e6051..e152bf6afa60 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -904,8 +904,7 @@ static ssize_t cifs_write(struct file *file, const char *write_data, if (rc != 0) break; } - /* BB FIXME We can not sign across two buffers yet */ - if((pTcon->ses->server->secMode & + if(experimEnabled || (pTcon->ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) == 0) { struct kvec iov[2]; unsigned int len; @@ -921,13 +920,13 @@ static ssize_t cifs_write(struct file *file, const char *write_data, *poffset, &bytes_written, iov, 1, long_op); } else - /* BB FIXME fixup indentation of line below */ - rc = CIFSSMBWrite(xid, pTcon, - open_file->netfid, - min_t(const int, cifs_sb->wsize, - write_size - total_written), - *poffset, &bytes_written, - write_data + total_written, NULL, long_op); + rc = CIFSSMBWrite(xid, pTcon, + open_file->netfid, + min_t(const int, cifs_sb->wsize, + write_size - total_written), + *poffset, &bytes_written, + write_data + total_written, + NULL, long_op); } if (rc || (bytes_written == 0)) { if (total_written) @@ -966,6 +965,16 @@ struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode) struct cifsFileInfo *open_file; int rc; + /* Having a null inode here (because mapping->host was set to zero by + the VFS or MM) should not happen but we had reports of on oops (due to + it being zero) during stress testcases so we need to check for it */ + + if(cifs_inode == NULL) { + cERROR(1,("Null inode passed to cifs_writeable_file")); + dump_stack(); + return NULL; + } + read_lock(&GlobalSMBSeslock); list_for_each_entry(open_file, &cifs_inode->openFileList, flist) { if (open_file->closePend) @@ -1091,12 +1100,11 @@ static int cifs_writepages(struct address_space *mapping, if (cifs_sb->wsize < PAGE_CACHE_SIZE) return generic_writepages(mapping, wbc); - /* BB FIXME we do not have code to sign across multiple buffers yet, - so go to older writepage style write which we can sign if needed */ if((cifs_sb->tcon->ses) && (cifs_sb->tcon->ses->server)) if(cifs_sb->tcon->ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) - return generic_writepages(mapping, wbc); + if(!experimEnabled) + return generic_writepages(mapping, wbc); /* * BB: Is this meaningful for a non-block-device file system? diff --git a/fs/cifs/ntlmssp.c b/fs/cifs/ntlmssp.c index 78866f925747..115359cc7a32 100644 --- a/fs/cifs/ntlmssp.c +++ b/fs/cifs/ntlmssp.c @@ -121,6 +121,20 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, const int type, } + /* copy session key */ + + /* if Unicode, align strings to two byte boundary */ + + /* copy user name */ /* BB Do we need to special case null user name? */ + + /* copy domain name */ + + /* copy Linux version */ + + /* copy network operating system name */ + + /* update bcc and smb buffer length */ + /* rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buf_type, 0); */ /* SMB request buf freed in SendReceive2 */ diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 7b8591acc5ad..41c022e3c132 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -590,6 +590,13 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon, first_entry_in_buffer = cifsFile->srch_inf.index_of_last_entry - cifsFile->srch_inf.entries_in_buffer; + + /* if first entry in buf is zero then is first buffer + in search response data which means it is likely . and .. + will be in this buffer, although some servers do not return + . and .. for the root of a drive and for those we need + to start two entries earlier */ + /* dump_cifs_file_struct(file, "In fce ");*/ if(((index_to_find < cifsFile->srch_inf.index_of_last_entry) && is_dir_changed(file)) || @@ -632,23 +639,14 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon, char * end_of_smb = cifsFile->srch_inf.ntwrk_buf_start + smbCalcSize((struct smb_hdr *) cifsFile->srch_inf.ntwrk_buf_start); + + current_entry = cifsFile->srch_inf.srch_entries_start; first_entry_in_buffer = cifsFile->srch_inf.index_of_last_entry - cifsFile->srch_inf.entries_in_buffer; pos_in_buf = index_to_find - first_entry_in_buffer; cFYI(1,("found entry - pos_in_buf %d",pos_in_buf)); - current_entry = cifsFile->srch_inf.srch_entries_start; for(i=0;(i<(pos_in_buf)) && (current_entry != NULL);i++) { /* go entry by entry figuring out which is first */ - /* if( . or ..) - skip */ - rc = cifs_entry_is_dot(current_entry,cifsFile); - if(rc == 1) /* is . or .. so skip */ { - cFYI(1,("Entry is .")); /* BB removeme BB */ - /* continue; */ - } else if (rc == 2 ) { - cFYI(1,("Entry is ..")); /* BB removeme BB */ - /* continue; */ - } current_entry = nxt_dir_entry(current_entry,end_of_smb); } if((current_entry == NULL) && (i < pos_in_buf)) { @@ -768,6 +766,11 @@ static int cifs_filldir(char *pfindEntry, struct file *file, if(file->f_dentry == NULL) return -ENOENT; + rc = cifs_entry_is_dot(pfindEntry,cifsF); + /* skip . and .. since we added them first */ + if(rc != 0) + return 0; + cifs_sb = CIFS_SB(file->f_dentry->d_sb); qstring.name = scratch_buf; @@ -896,22 +899,22 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir) switch ((int) file->f_pos) { case 0: - /*if (filldir(direntry, ".", 1, file->f_pos, + if (filldir(direntry, ".", 1, file->f_pos, file->f_dentry->d_inode->i_ino, DT_DIR) < 0) { - cERROR(1, ("Filldir for current dir failed ")); + cERROR(1, ("Filldir for current dir failed")); rc = -ENOMEM; break; } - file->f_pos++; */ + file->f_pos++; case 1: - /* if (filldir(direntry, "..", 2, file->f_pos, + if (filldir(direntry, "..", 2, file->f_pos, file->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) { cERROR(1, ("Filldir for parent dir failed ")); rc = -ENOMEM; break; } - file->f_pos++; */ - case 2: + file->f_pos++; + default: /* 1) If search is active, is in current search buffer? if it before then restart search @@ -925,7 +928,6 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir) return rc; } } - default: if(file->private_data == NULL) { rc = -EINVAL; FreeXid(xid); @@ -945,8 +947,6 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir) kfree(cifsFile->search_resume_name); cifsFile->search_resume_name = NULL; */ - /* BB account for . and .. in f_pos as special case */ - rc = find_cifs_entry(xid,pTcon, file, ¤t_entry,&num_to_fill); if(rc) { @@ -975,7 +975,8 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir) num_to_fill, i)); break; } - + /* if buggy server returns . and .. late do + we want to check for that here? */ rc = cifs_filldir(current_entry, file, filldir, direntry,tmp_buf); file->f_pos++; From 73a88814542d3f5b8973f3db9d7f380bd29957c4 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Sat, 22 Apr 2006 02:35:30 -0700 Subject: [PATCH 033/160] [PATCH] isdn4linux: Siemens Gigaset base driver: fix disconnect handling Fix a possible Oops in the Siemens Gigaset base driver when the device is unplugged while an ISDN connection is still active, and makes sure that the isdn4linux link level (LL) is properly informed if a connection is broken by the USB cable being unplugged. - Avoid unsafe checks of URB status fields outside the URB completion handlers, keep track of in-use URBs myself instead. - If an isochronous transfer URB completes with status==0, also check the status of the frame descriptors. - Verify length of interrupt messages received from the device. - Align the length limit on transmitted AT commands with the device documentation. - In case of AT response receive overrun, keep newly arrived instead of old unread data. - Remove redundant check of device ID in the USB probe function. - Correct and improve some comments and formatting. Signed-off-by: Tilman Schmidt Acked-by: Hansjoerg Lipp Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/isdn/gigaset/bas-gigaset.c | 597 ++++++++++++++++------------- drivers/isdn/gigaset/common.c | 3 +- drivers/isdn/gigaset/ev-layer.c | 3 + drivers/isdn/gigaset/gigaset.h | 7 +- drivers/isdn/gigaset/i4l.c | 2 +- drivers/isdn/gigaset/isocdata.c | 10 +- 6 files changed, 342 insertions(+), 280 deletions(-) diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c index f86ed6af3aa2..eb41aba3ddef 100644 --- a/drivers/isdn/gigaset/bas-gigaset.c +++ b/drivers/isdn/gigaset/bas-gigaset.c @@ -5,8 +5,6 @@ * Tilman Schmidt , * Stefan Eilers. * - * Based on usb-gigaset.c. - * * ===================================================================== * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -46,19 +44,20 @@ MODULE_PARM_DESC(cidmode, "Call-ID mode"); #define GIGASET_DEVFSNAME "gig/bas/" #define GIGASET_DEVNAME "ttyGB" -#define IF_WRITEBUF 256 //FIXME +/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */ +#define IF_WRITEBUF 264 /* Values for the Gigaset 307x */ #define USB_GIGA_VENDOR_ID 0x0681 -#define USB_GIGA_PRODUCT_ID 0x0001 -#define USB_4175_PRODUCT_ID 0x0002 +#define USB_3070_PRODUCT_ID 0x0001 +#define USB_3075_PRODUCT_ID 0x0002 #define USB_SX303_PRODUCT_ID 0x0021 #define USB_SX353_PRODUCT_ID 0x0022 /* table of devices that work with this driver */ static struct usb_device_id gigaset_table [] = { - { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_GIGA_PRODUCT_ID) }, - { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_4175_PRODUCT_ID) }, + { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3070_PRODUCT_ID) }, + { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3075_PRODUCT_ID) }, { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) }, { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX353_PRODUCT_ID) }, { } /* Terminating entry */ @@ -77,6 +76,10 @@ static int gigaset_probe(struct usb_interface *interface, /* Function will be called if the device is unplugged */ static void gigaset_disconnect(struct usb_interface *interface); +static void read_ctrl_callback(struct urb *, struct pt_regs *); +static void stopurbs(struct bas_bc_state *); +static int atwrite_submit(struct cardstate *, unsigned char *, int); +static int start_cbsend(struct cardstate *); /*==============================================================================*/ @@ -111,12 +114,14 @@ struct bas_cardstate { }; /* status of direct USB connection to 307x base (bits in basstate) */ -#define BS_ATOPEN 0x001 -#define BS_B1OPEN 0x002 -#define BS_B2OPEN 0x004 -#define BS_ATREADY 0x008 -#define BS_INIT 0x010 -#define BS_ATTIMER 0x020 +#define BS_ATOPEN 0x001 /* AT channel open */ +#define BS_B1OPEN 0x002 /* B channel 1 open */ +#define BS_B2OPEN 0x004 /* B channel 2 open */ +#define BS_ATREADY 0x008 /* base ready for AT command */ +#define BS_INIT 0x010 /* base has signalled INIT_OK */ +#define BS_ATTIMER 0x020 /* waiting for HD_READY_SEND_ATDATA */ +#define BS_ATRDPEND 0x040 /* urb_cmd_in in use */ +#define BS_ATWRPEND 0x080 /* urb_cmd_out in use */ static struct gigaset_driver *driver = NULL; @@ -130,6 +135,47 @@ static struct usb_driver gigaset_usb_driver = { .id_table = gigaset_table, }; +/* get message text for usb_submit_urb return code + */ +static char *get_usb_rcmsg(int rc) +{ + static char unkmsg[28]; + + switch (rc) { + case 0: + return "success"; + case -ENOMEM: + return "out of memory"; + case -ENODEV: + return "device not present"; + case -ENOENT: + return "endpoint not present"; + case -ENXIO: + return "URB type not supported"; + case -EINVAL: + return "invalid argument"; + case -EAGAIN: + return "start frame too early or too much scheduled"; + case -EFBIG: + return "too many isochronous frames requested"; + case -EPIPE: + return "endpoint stalled"; + case -EMSGSIZE: + return "invalid packet size"; + case -ENOSPC: + return "would overcommit USB bandwidth"; + case -ESHUTDOWN: + return "device shut down"; + case -EPERM: + return "reject flag set"; + case -EHOSTUNREACH: + return "device suspended"; + default: + snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", rc); + return unkmsg; + } +} + /* get message text for USB status code */ static char *get_usb_statmsg(int status) @@ -140,43 +186,37 @@ static char *get_usb_statmsg(int status) case 0: return "success"; case -ENOENT: - return "canceled"; - case -ECONNRESET: - return "canceled (async)"; + return "unlinked (sync)"; case -EINPROGRESS: return "pending"; case -EPROTO: - return "bit stuffing or unknown USB error"; + return "bit stuffing error, timeout, or unknown USB error"; case -EILSEQ: - return "Illegal byte sequence (CRC mismatch)"; - case -EPIPE: - return "babble detect or endpoint stalled"; - case -ENOSR: - return "buffer error"; + return "CRC mismatch, timeout, or unknown USB error"; case -ETIMEDOUT: return "timed out"; - case -ENODEV: - return "device not present"; + case -EPIPE: + return "endpoint stalled"; + case -ECOMM: + return "IN buffer overrun"; + case -ENOSR: + return "OUT buffer underrun"; + case -EOVERFLOW: + return "too much data"; case -EREMOTEIO: return "short packet detected"; + case -ENODEV: + return "device removed"; case -EXDEV: return "partial isochronous transfer"; case -EINVAL: return "invalid argument"; - case -ENXIO: - return "URB already queued"; - case -EAGAIN: - return "isochronous start frame too early or too much scheduled"; - case -EFBIG: - return "too many isochronous frames requested"; - case -EMSGSIZE: - return "endpoint message size zero"; + case -ECONNRESET: + return "unlinked (async)"; case -ESHUTDOWN: - return "endpoint shutdown"; - case -EBUSY: - return "another request pending"; + return "device shut down"; default: - snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", status); + snprintf(unkmsg, sizeof(unkmsg), "unknown status %d", status); return unkmsg; } } @@ -277,18 +317,17 @@ static inline void error_hangup(struct bc_state *bcs) gig_dbg(DEBUG_ANY, "%s: scheduling HUP for channel %d", __func__, bcs->channel); - if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) { - //FIXME what should we do? - return; - } + if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) + dev_err(cs->dev, "event queue full\n"); gigaset_schedule_event(cs); } /* error_reset * reset Gigaset device because of an unrecoverable error - * This function may be called from any context and takes care of scheduling - * the necessary actions for execution outside of interrupt context. + * This function may be called from any context, and should take care of + * scheduling the necessary actions for execution outside of interrupt context. + * Right now, it just generates a kernel message calling for help. * argument: * controller state structure */ @@ -364,36 +403,38 @@ static void cmd_in_timeout(unsigned long data) { struct cardstate *cs = (struct cardstate *) data; struct bas_cardstate *ucs = cs->hw.bas; - unsigned long flags; - spin_lock_irqsave(&cs->lock, flags); - if (unlikely(!cs->connected)) { - gig_dbg(DEBUG_USBREQ, "%s: disconnected", __func__); - spin_unlock_irqrestore(&cs->lock, flags); - return; - } if (!ucs->rcvbuf_size) { gig_dbg(DEBUG_USBREQ, "%s: no receive in progress", __func__); - spin_unlock_irqrestore(&cs->lock, flags); return; } - spin_unlock_irqrestore(&cs->lock, flags); dev_err(cs->dev, "timeout reading AT response\n"); error_reset(cs); //FIXME retry? } +/* set/clear bits in base connection state, return previous state + */ +inline static int update_basstate(struct bas_cardstate *ucs, + int set, int clear) +{ + unsigned long flags; + int state; -static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs); + spin_lock_irqsave(&ucs->lock, flags); + state = atomic_read(&ucs->basstate); + atomic_set(&ucs->basstate, (state & ~clear) | set); + spin_unlock_irqrestore(&ucs->lock, flags); + return state; +} /* atread_submit - * submit an HD_READ_ATMESSAGE command URB + * submit an HD_READ_ATMESSAGE command URB and optionally start a timeout * parameters: * cs controller state structure * timeout timeout in 1/10 sec., 0: none * return value: * 0 on success - * -EINVAL if a NULL pointer is encountered somewhere * -EBUSY if another request is pending * any URB submission error code */ @@ -405,7 +446,7 @@ static int atread_submit(struct cardstate *cs, int timeout) gig_dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)", ucs->rcvbuf_size); - if (ucs->urb_cmd_in->status == -EINPROGRESS) { + if (update_basstate(ucs, BS_ATRDPEND, 0) & BS_ATRDPEND) { dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: URB busy\n"); return -EBUSY; @@ -423,6 +464,7 @@ static int atread_submit(struct cardstate *cs, int timeout) read_ctrl_callback, cs->inbuf); if ((ret = usb_submit_urb(ucs->urb_cmd_in, SLAB_ATOMIC)) != 0) { + update_basstate(ucs, 0, BS_ATRDPEND); dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: %s\n", get_usb_statmsg(ret)); return ret; @@ -438,26 +480,6 @@ static int atread_submit(struct cardstate *cs, int timeout) return 0; } -static void stopurbs(struct bas_bc_state *); -static int start_cbsend(struct cardstate *); - -/* set/clear bits in base connection state - */ -inline static void update_basstate(struct bas_cardstate *ucs, - int set, int clear) -{ - unsigned long flags; - int state; - - spin_lock_irqsave(&ucs->lock, flags); - state = atomic_read(&ucs->basstate); - state &= ~clear; - state |= set; - atomic_set(&ucs->basstate, state); - spin_unlock_irqrestore(&ucs->lock, flags); -} - - /* read_int_callback * USB completion handler for interrupt pipe input * called by the USB subsystem in interrupt context @@ -471,20 +493,25 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs) struct bas_cardstate *ucs = cs->hw.bas; struct bc_state *bcs; unsigned long flags; - int status; + int rc; unsigned l; int channel; switch (urb->status) { case 0: /* success */ break; - case -ENOENT: /* canceled */ - case -ECONNRESET: /* canceled (async) */ + case -ENOENT: /* cancelled */ + case -ECONNRESET: /* cancelled (async) */ case -EINPROGRESS: /* pending */ /* ignore silently */ gig_dbg(DEBUG_USBREQ, "%s: %s", __func__, get_usb_statmsg(urb->status)); return; + case -ENODEV: /* device removed */ + case -ESHUTDOWN: /* device shut down */ + //FIXME use this as disconnect indicator? + gig_dbg(DEBUG_USBREQ, "%s: device disconnected", __func__); + return; default: /* severe trouble */ dev_warn(cs->dev, "interrupt read: %s\n", get_usb_statmsg(urb->status)); @@ -492,6 +519,13 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs) goto resubmit; } + /* drop incomplete packets even if the missing bytes wouldn't matter */ + if (unlikely(urb->actual_length < 3)) { + dev_warn(cs->dev, "incomplete interrupt packet (%d bytes)\n", + urb->actual_length); + goto resubmit; + } + l = (unsigned) ucs->int_in_buf[1] + (((unsigned) ucs->int_in_buf[2]) << 8); @@ -558,25 +592,28 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs) } spin_lock_irqsave(&cs->lock, flags); if (ucs->rcvbuf_size) { - spin_unlock_irqrestore(&cs->lock, flags); + /* throw away previous buffer - we have no queue */ dev_err(cs->dev, - "receive AT data overrun, %d bytes lost\n", l); - error_reset(cs); //FIXME reschedule - break; + "receive AT data overrun, %d bytes lost\n", + ucs->rcvbuf_size); + kfree(ucs->rcvbuf); + ucs->rcvbuf_size = 0; } if ((ucs->rcvbuf = kmalloc(l, GFP_ATOMIC)) == NULL) { spin_unlock_irqrestore(&cs->lock, flags); - dev_err(cs->dev, "out of memory, %d bytes lost\n", l); - error_reset(cs); //FIXME reschedule + dev_err(cs->dev, "out of memory receiving AT data\n"); + error_reset(cs); break; } ucs->rcvbuf_size = l; ucs->retry_cmd_in = 0; - if ((status = atread_submit(cs, BAS_TIMEOUT)) < 0) { + if ((rc = atread_submit(cs, BAS_TIMEOUT)) < 0) { kfree(ucs->rcvbuf); ucs->rcvbuf = NULL; ucs->rcvbuf_size = 0; - error_reset(cs); //FIXME reschedule + if (rc != -ENODEV) + //FIXME corrective action? + error_reset(cs); } spin_unlock_irqrestore(&cs->lock, flags); break; @@ -598,12 +635,10 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs) check_pending(ucs); resubmit: - spin_lock_irqsave(&cs->lock, flags); - status = cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV; - spin_unlock_irqrestore(&cs->lock, flags); - if (unlikely(status)) { + rc = usb_submit_urb(urb, SLAB_ATOMIC); + if (unlikely(rc != 0 && rc != -ENODEV)) { dev_err(cs->dev, "could not resubmit interrupt URB: %s\n", - get_usb_statmsg(status)); + get_usb_rcmsg(rc)); error_reset(cs); } } @@ -622,18 +657,12 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs) struct bas_cardstate *ucs = cs->hw.bas; int have_data = 0; unsigned numbytes; - unsigned long flags; + int rc; - spin_lock_irqsave(&cs->lock, flags); - if (unlikely(!cs->connected)) { - warn("%s: disconnected", __func__); - spin_unlock_irqrestore(&cs->lock, flags); - return; - } + update_basstate(ucs, 0, BS_ATRDPEND); if (!ucs->rcvbuf_size) { dev_warn(cs->dev, "%s: no receive in progress\n", __func__); - spin_unlock_irqrestore(&cs->lock, flags); return; } @@ -666,9 +695,11 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs) } break; - case -ENOENT: /* canceled */ - case -ECONNRESET: /* canceled (async) */ + case -ENOENT: /* cancelled */ + case -ECONNRESET: /* cancelled (async) */ case -EINPROGRESS: /* pending */ + case -ENODEV: /* device removed */ + case -ESHUTDOWN: /* device shut down */ /* no action necessary */ gig_dbg(DEBUG_USBREQ, "%s: %s", __func__, get_usb_statmsg(urb->status)); @@ -681,11 +712,11 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs) if (ucs->retry_cmd_in++ < BAS_RETRY) { dev_notice(cs->dev, "control read: retry %d\n", ucs->retry_cmd_in); - if (atread_submit(cs, BAS_TIMEOUT) >= 0) { - /* resubmitted - bypass regular exit block */ - spin_unlock_irqrestore(&cs->lock, flags); + rc = atread_submit(cs, BAS_TIMEOUT); + if (rc >= 0 || rc == -ENODEV) + /* resubmitted or disconnected */ + /* - bypass regular exit block */ return; - } } else { dev_err(cs->dev, "control read: giving up after %d tries\n", @@ -697,7 +728,6 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs) kfree(ucs->rcvbuf); ucs->rcvbuf = NULL; ucs->rcvbuf_size = 0; - spin_unlock_irqrestore(&cs->lock, flags); if (have_data) { gig_dbg(DEBUG_INTR, "%s-->BH", __func__); gigaset_schedule_event(cs); @@ -719,8 +749,11 @@ static void read_iso_callback(struct urb *urb, struct pt_regs *regs) int i, rc; /* status codes not worth bothering the tasklet with */ - if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET || - urb->status == -EINPROGRESS)) { + if (unlikely(urb->status == -ENOENT || + urb->status == -ECONNRESET || + urb->status == -EINPROGRESS || + urb->status == -ENODEV || + urb->status == -ESHUTDOWN)) { gig_dbg(DEBUG_ISO, "%s: %s", __func__, get_usb_statmsg(urb->status)); return; @@ -740,9 +773,9 @@ static void read_iso_callback(struct urb *urb, struct pt_regs *regs) for (i = 0; i < BAS_NUMFRAMES; i++) { ubc->isoinlost += urb->iso_frame_desc[i].actual_length; if (unlikely(urb->iso_frame_desc[i].status != 0 && - urb->iso_frame_desc[i].status != -EINPROGRESS)) { + urb->iso_frame_desc[i].status != + -EINPROGRESS)) ubc->loststatus = urb->iso_frame_desc[i].status; - } urb->iso_frame_desc[i].status = 0; urb->iso_frame_desc[i].actual_length = 0; } @@ -754,10 +787,10 @@ static void read_iso_callback(struct urb *urb, struct pt_regs *regs) gig_dbg(DEBUG_ISO, "%s: isoc read overrun/resubmit", __func__); rc = usb_submit_urb(urb, SLAB_ATOMIC); - if (unlikely(rc != 0)) { + if (unlikely(rc != 0 && rc != -ENODEV)) { dev_err(bcs->cs->dev, "could not resubmit isochronous read " - "URB: %s\n", get_usb_statmsg(rc)); + "URB: %s\n", get_usb_rcmsg(rc)); dump_urb(DEBUG_ISO, "isoc read", urb); error_hangup(bcs); } @@ -780,8 +813,11 @@ static void write_iso_callback(struct urb *urb, struct pt_regs *regs) unsigned long flags; /* status codes not worth bothering the tasklet with */ - if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET || - urb->status == -EINPROGRESS)) { + if (unlikely(urb->status == -ENOENT || + urb->status == -ECONNRESET || + urb->status == -EINPROGRESS || + urb->status == -ENODEV || + urb->status == -ESHUTDOWN)) { gig_dbg(DEBUG_ISO, "%s: %s", __func__, get_usb_statmsg(urb->status)); return; @@ -822,7 +858,6 @@ static int starturbs(struct bc_state *bcs) for (k = 0; k < BAS_INURBS; k++) { urb = ubc->isoinurbs[k]; if (!urb) { - dev_err(bcs->cs->dev, "isoinurbs[%d]==NULL\n", k); rc = -EFAULT; goto error; } @@ -844,12 +879,8 @@ static int starturbs(struct bc_state *bcs) } dump_urb(DEBUG_ISO, "Initial isoc read", urb); - if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) { - dev_err(bcs->cs->dev, - "could not submit isochronous read URB %d: %s\n", - k, get_usb_statmsg(rc)); + if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) goto error; - } } /* initialize L2 transmission */ @@ -859,7 +890,6 @@ static int starturbs(struct bc_state *bcs) for (k = 0; k < BAS_OUTURBS; ++k) { urb = ubc->isoouturbs[k].urb; if (!urb) { - dev_err(bcs->cs->dev, "isoouturbs[%d].urb==NULL\n", k); rc = -EFAULT; goto error; } @@ -885,12 +915,8 @@ static int starturbs(struct bc_state *bcs) for (k = 0; k < 2; ++k) { dump_urb(DEBUG_ISO, "Initial isoc write", urb); rc = usb_submit_urb(ubc->isoouturbs[k].urb, SLAB_ATOMIC); - if (rc != 0) { - dev_err(bcs->cs->dev, - "could not submit isochronous write URB %d: %s\n", - k, get_usb_statmsg(rc)); + if (rc != 0) goto error; - } } dump_urb(DEBUG_ISO, "Initial isoc write (free)", urb); ubc->isooutfree = &ubc->isoouturbs[2]; @@ -916,15 +942,15 @@ static void stopurbs(struct bas_bc_state *ubc) for (k = 0; k < BAS_INURBS; ++k) { rc = usb_unlink_urb(ubc->isoinurbs[k]); gig_dbg(DEBUG_ISO, - "%s: isoc input URB %d unlinked, result = %d", - __func__, k, rc); + "%s: isoc input URB %d unlinked, result = %s", + __func__, k, get_usb_rcmsg(rc)); } for (k = 0; k < BAS_OUTURBS; ++k) { rc = usb_unlink_urb(ubc->isoouturbs[k].urb); gig_dbg(DEBUG_ISO, - "%s: isoc output URB %d unlinked, result = %d", - __func__, k, rc); + "%s: isoc output URB %d unlinked, result = %s", + __func__, k, get_usb_rcmsg(rc)); } } @@ -934,7 +960,7 @@ static void stopurbs(struct bas_bc_state *ubc) /* submit_iso_write_urb * fill and submit the next isochronous write URB * parameters: - * bcs B channel state structure + * ucx context structure containing URB * return value: * number of frames submitted in URB * 0 if URB not submitted because no data available (isooutbuf busy) @@ -946,7 +972,6 @@ static int submit_iso_write_urb(struct isow_urbctx_t *ucx) struct bas_bc_state *ubc = ucx->bcs->hw.bas; struct usb_iso_packet_descriptor *ifd; int corrbytes, nframe, rc; - unsigned long flags; /* urb->dev is clobbered by USB subsystem */ urb->dev = ucx->bcs->cs->hw.bas->udev; @@ -992,20 +1017,22 @@ static int submit_iso_write_urb(struct isow_urbctx_t *ucx) ifd->status = 0; ifd->actual_length = 0; } - if ((urb->number_of_packets = nframe) > 0) { - spin_lock_irqsave(&ucx->bcs->cs->lock, flags); - rc = ucx->bcs->cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV; - spin_unlock_irqrestore(&ucx->bcs->cs->lock, flags); + if (unlikely(nframe == 0)) + return 0; /* no data to send */ + urb->number_of_packets = nframe; - if (rc) { + rc = usb_submit_urb(urb, SLAB_ATOMIC); + if (unlikely(rc)) { + if (rc == -ENODEV) + /* device removed - give up silently */ + gig_dbg(DEBUG_ISO, "%s: disconnected", __func__); + else dev_err(ucx->bcs->cs->dev, "could not submit isochronous write URB: %s\n", - get_usb_statmsg(rc)); - dump_urb(DEBUG_ISO, "isoc write", urb); - return rc; - } - ++ubc->numsub; + get_usb_rcmsg(rc)); + return rc; } + ++ubc->numsub; return nframe; } @@ -1028,6 +1055,7 @@ static void write_iso_tasklet(unsigned long data) int i; struct sk_buff *skb; int len; + int rc; /* loop while completed URBs arrive in time */ for (;;) { @@ -1057,7 +1085,8 @@ static void write_iso_tasklet(unsigned long data) ubc->isooutfree = NULL; spin_unlock_irqrestore(&ubc->isooutlock, flags); if (next) { - if (submit_iso_write_urb(next) <= 0) { + rc = submit_iso_write_urb(next); + if (unlikely(rc <= 0 && rc != -ENODEV)) { /* could not submit URB, put it back */ spin_lock_irqsave(&ubc->isooutlock, flags); if (ubc->isooutfree == NULL) { @@ -1077,17 +1106,18 @@ static void write_iso_tasklet(unsigned long data) /* process completed URB */ urb = done->urb; switch (urb->status) { + case -EXDEV: /* partial completion */ + gig_dbg(DEBUG_ISO, "%s: URB partially completed", + __func__); + /* fall through - what's the difference anyway? */ case 0: /* normal completion */ - break; - case -EXDEV: /* inspect individual frames */ - /* assumptions (for lack of documentation): - * - actual_length bytes of the frame in error are + /* inspect individual frames + * assumptions (for lack of documentation): + * - actual_length bytes of first frame in error are * successfully sent * - all following frames are not sent at all */ - gig_dbg(DEBUG_ISO, "%s: URB partially completed", - __func__); - offset = done->limit; /* just in case */ + offset = done->limit; /* default (no error) */ for (i = 0; i < BAS_NUMFRAMES; i++) { ifd = &urb->iso_frame_desc[i]; if (ifd->status || @@ -1122,7 +1152,7 @@ static void write_iso_tasklet(unsigned long data) } #endif break; - case -EPIPE: //FIXME is this the code for "underrun"? + case -EPIPE: /* stall - probably underrun */ dev_err(cs->dev, "isochronous write stalled\n"); error_hangup(bcs); break; @@ -1142,7 +1172,8 @@ static void write_iso_tasklet(unsigned long data) spin_unlock_irqrestore(&ubc->isooutlock, flags); if (next) { /* only one URB still active - resubmit one */ - if (submit_iso_write_urb(next) <= 0) { + rc = submit_iso_write_urb(next); + if (unlikely(rc <= 0 && rc != -ENODEV)) { /* couldn't submit */ error_hangup(bcs); } @@ -1222,10 +1253,9 @@ static void read_iso_tasklet(unsigned long data) break; case -ENOENT: case -ECONNRESET: - gig_dbg(DEBUG_ISO, "%s: URB canceled", __func__); - continue; /* -> skip */ - case -EINPROGRESS: /* huh? */ - gig_dbg(DEBUG_ISO, "%s: URB still pending", __func__); + case -EINPROGRESS: + gig_dbg(DEBUG_ISO, "%s: %s", + __func__, get_usb_statmsg(urb->status)); continue; /* -> skip */ case -EPIPE: dev_err(cs->dev, "isochronous read stalled\n"); @@ -1290,13 +1320,11 @@ static void read_iso_tasklet(unsigned long data) urb->dev = bcs->cs->hw.bas->udev; urb->transfer_flags = URB_ISO_ASAP; urb->number_of_packets = BAS_NUMFRAMES; - spin_lock_irqsave(&cs->lock, flags); - rc = cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV; - spin_unlock_irqrestore(&cs->lock, flags); - if (rc) { + rc = usb_submit_urb(urb, SLAB_ATOMIC); + if (unlikely(rc != 0 && rc != -ENODEV)) { dev_err(cs->dev, "could not resubmit isochronous read URB: %s\n", - get_usb_statmsg(rc)); + get_usb_rcmsg(rc)); dump_urb(DEBUG_ISO, "resubmit iso read", urb); error_hangup(bcs); } @@ -1397,7 +1425,6 @@ static void write_ctrl_callback(struct urb *urb, struct pt_regs *regs) * timeout timeout in seconds (0: no timeout) * return value: * 0 on success - * -EINVAL if a NULL pointer is encountered somewhere * -EBUSY if another request is pending * any URB submission error code */ @@ -1418,12 +1445,6 @@ static int req_submit(struct bc_state *bcs, int req, int val, int timeout) req, ucs->pending); return -EBUSY; } - if (ucs->urb_ctrl->status == -EINPROGRESS) { - spin_unlock_irqrestore(&ucs->lock, flags); - dev_err(bcs->cs->dev, - "could not submit request 0x%02x: URB busy\n", req); - return -EBUSY; - } ucs->dr_ctrl.bRequestType = OUT_VENDOR_REQ; ucs->dr_ctrl.bRequest = req; @@ -1465,22 +1486,36 @@ static int req_submit(struct bc_state *bcs, int req, int val, int timeout) static int gigaset_init_bchannel(struct bc_state *bcs) { int req, ret; + unsigned long flags; + + spin_lock_irqsave(&bcs->cs->lock, flags); + if (unlikely(!bcs->cs->connected)) { + gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__); + spin_unlock_irqrestore(&bcs->cs->lock, flags); + return -ENODEV; + } if ((ret = starturbs(bcs)) < 0) { dev_err(bcs->cs->dev, - "could not start isochronous I/O for channel %d\n", - bcs->channel + 1); - error_hangup(bcs); + "could not start isochronous I/O for channel B%d: %s\n", + bcs->channel + 1, + ret == -EFAULT ? "null URB" : get_usb_rcmsg(ret)); + if (ret != -ENODEV) + error_hangup(bcs); + spin_unlock_irqrestore(&bcs->cs->lock, flags); return ret; } req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL; if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) { - dev_err(bcs->cs->dev, "could not open channel %d: %s\n", - bcs->channel + 1, get_usb_statmsg(ret)); + dev_err(bcs->cs->dev, "could not open channel B%d\n", + bcs->channel + 1); stopurbs(bcs->hw.bas); - error_hangup(bcs); + if (ret != -ENODEV) + error_hangup(bcs); } + + spin_unlock_irqrestore(&bcs->cs->lock, flags); return ret; } @@ -1497,19 +1532,30 @@ static int gigaset_init_bchannel(struct bc_state *bcs) static int gigaset_close_bchannel(struct bc_state *bcs) { int req, ret; + unsigned long flags; + + spin_lock_irqsave(&bcs->cs->lock, flags); + if (unlikely(!bcs->cs->connected)) { + spin_unlock_irqrestore(&bcs->cs->lock, flags); + gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__); + return -ENODEV; + } if (!(atomic_read(&bcs->cs->hw.bas->basstate) & (bcs->channel ? BS_B2OPEN : BS_B1OPEN))) { /* channel not running: just signal common.c */ + spin_unlock_irqrestore(&bcs->cs->lock, flags); gigaset_bchannel_down(bcs); return 0; } + /* channel running: tell device to close it */ req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL; if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) - dev_err(bcs->cs->dev, - "could not submit HD_CLOSE_BxCHANNEL request: %s\n", - get_usb_statmsg(ret)); + dev_err(bcs->cs->dev, "closing channel B%d failed\n", + bcs->channel + 1); + + spin_unlock_irqrestore(&bcs->cs->lock, flags); return ret; } @@ -1545,8 +1591,6 @@ static void complete_cb(struct cardstate *cs) kfree(cb); } -static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len); - /* write_command_callback * USB completion handler for AT command transmission * called by the USB subsystem in interrupt context @@ -1560,13 +1604,17 @@ static void write_command_callback(struct urb *urb, struct pt_regs *regs) struct bas_cardstate *ucs = cs->hw.bas; unsigned long flags; + update_basstate(ucs, 0, BS_ATWRPEND); + /* check status */ switch (urb->status) { case 0: /* normal completion */ break; - case -ENOENT: /* canceled */ - case -ECONNRESET: /* canceled (async) */ + case -ENOENT: /* cancelled */ + case -ECONNRESET: /* cancelled (async) */ case -EINPROGRESS: /* pending */ + case -ENODEV: /* device removed */ + case -ESHUTDOWN: /* device shut down */ /* ignore silently */ gig_dbg(DEBUG_USBREQ, "%s: %s", __func__, get_usb_statmsg(urb->status)); @@ -1627,19 +1675,17 @@ static void atrdy_timeout(unsigned long data) * len length of command to send * return value: * 0 on success - * -EFAULT if a NULL pointer is encountered somewhere * -EBUSY if another request is pending * any URB submission error code */ static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len) { struct bas_cardstate *ucs = cs->hw.bas; - unsigned long flags; - int ret; + int rc; gig_dbg(DEBUG_USBREQ, "-------> HD_WRITE_ATMESSAGE (%d)", len); - if (ucs->urb_cmd_out->status == -EINPROGRESS) { + if (update_basstate(ucs, BS_ATWRPEND, 0) & BS_ATWRPEND) { dev_err(cs->dev, "could not submit HD_WRITE_ATMESSAGE: URB busy\n"); return -EBUSY; @@ -1654,29 +1700,22 @@ static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len) usb_sndctrlpipe(ucs->udev, 0), (unsigned char*) &ucs->dr_cmd_out, buf, len, write_command_callback, cs); - - spin_lock_irqsave(&cs->lock, flags); - ret = cs->connected ? usb_submit_urb(ucs->urb_cmd_out, SLAB_ATOMIC) : -ENODEV; - spin_unlock_irqrestore(&cs->lock, flags); - - if (ret) { + rc = usb_submit_urb(ucs->urb_cmd_out, SLAB_ATOMIC); + if (unlikely(rc)) { + update_basstate(ucs, 0, BS_ATWRPEND); dev_err(cs->dev, "could not submit HD_WRITE_ATMESSAGE: %s\n", - get_usb_statmsg(ret)); - return ret; + get_usb_rcmsg(rc)); + return rc; } - /* submitted successfully */ - update_basstate(ucs, 0, BS_ATREADY); - - /* start timeout if necessary */ - if (!(atomic_read(&ucs->basstate) & BS_ATTIMER)) { + /* submitted successfully, start timeout if necessary */ + if (!(update_basstate(ucs, BS_ATTIMER, BS_ATREADY) & BS_ATTIMER)) { gig_dbg(DEBUG_OUTPUT, "setting ATREADY timeout of %d/10 secs", ATRDY_TIMEOUT); ucs->timer_atrdy.expires = jiffies + ATRDY_TIMEOUT * HZ / 10; ucs->timer_atrdy.data = (unsigned long) cs; ucs->timer_atrdy.function = atrdy_timeout; add_timer(&ucs->timer_atrdy); - update_basstate(ucs, BS_ATTIMER, 0); } return 0; } @@ -1702,7 +1741,6 @@ static int start_cbsend(struct cardstate *cs) gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD, "AT channel not open"); rc = req_submit(cs->bcs, HD_OPEN_ATCHANNEL, 0, BAS_TIMEOUT); if (rc < 0) { - dev_err(cs->dev, "could not open AT channel\n"); /* flush command queue */ spin_lock_irqsave(&cs->cmdlock, flags); while (cs->cmdbuf != NULL) @@ -1786,8 +1824,14 @@ static int gigaset_write_cmd(struct cardstate *cs, cs->lastcmdbuf = cb; spin_unlock_irqrestore(&cs->cmdlock, flags); + spin_lock_irqsave(&cs->lock, flags); + if (unlikely(!cs->connected)) { + spin_unlock_irqrestore(&cs->lock, flags); + gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__); + return -ENODEV; + } status = start_cbsend(cs); - + spin_unlock_irqrestore(&cs->lock, flags); return status < 0 ? status : len; } @@ -1849,12 +1893,32 @@ static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6]) */ static int gigaset_freebcshw(struct bc_state *bcs) { - if (!bcs->hw.bas) + struct bas_bc_state *ubc = bcs->hw.bas; + int i; + + if (!ubc) return 0; - if (bcs->hw.bas->isooutbuf) - kfree(bcs->hw.bas->isooutbuf); - kfree(bcs->hw.bas); + /* kill URBs and tasklets before freeing - better safe than sorry */ + atomic_set(&ubc->running, 0); + for (i = 0; i < BAS_OUTURBS; ++i) + if (ubc->isoouturbs[i].urb) { + gig_dbg(DEBUG_INIT, "%s: killing iso out URB %d", + __func__, i); + usb_kill_urb(ubc->isoouturbs[i].urb); + usb_free_urb(ubc->isoouturbs[i].urb); + } + for (i = 0; i < BAS_INURBS; ++i) + if (ubc->isoinurbs[i]) { + gig_dbg(DEBUG_INIT, "%s: killing iso in URB %d", + __func__, i); + usb_kill_urb(ubc->isoinurbs[i]); + usb_free_urb(ubc->isoinurbs[i]); + } + tasklet_kill(&ubc->sent_tasklet); + tasklet_kill(&ubc->rcvd_tasklet); + kfree(ubc->isooutbuf); + kfree(ubc); bcs->hw.bas = NULL; return 1; } @@ -1931,13 +1995,9 @@ static void gigaset_reinitbcshw(struct bc_state *bcs) static void gigaset_freecshw(struct cardstate *cs) { - struct bas_cardstate *ucs = cs->hw.bas; - - del_timer(&ucs->timer_ctrl); - del_timer(&ucs->timer_atrdy); - del_timer(&ucs->timer_cmd_in); - + /* timers, URBs and rcvbuf are disposed of in disconnect */ kfree(cs->hw.bas); + cs->hw.bas = NULL; } static int gigaset_initcshw(struct cardstate *cs) @@ -2041,23 +2101,13 @@ static int gigaset_probe(struct usb_interface *interface, struct bas_bc_state *ubc; struct usb_endpoint_descriptor *endpoint; int i, j; - int ret; + int rc; gig_dbg(DEBUG_ANY, "%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)", __func__, le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct)); - /* See if the device offered us matches what we can accept */ - if ((le16_to_cpu(udev->descriptor.idVendor) != USB_GIGA_VENDOR_ID) || - (le16_to_cpu(udev->descriptor.idProduct) != USB_GIGA_PRODUCT_ID && - le16_to_cpu(udev->descriptor.idProduct) != USB_4175_PRODUCT_ID && - le16_to_cpu(udev->descriptor.idProduct) != USB_SX303_PRODUCT_ID && - le16_to_cpu(udev->descriptor.idProduct) != USB_SX353_PRODUCT_ID)) { - gig_dbg(DEBUG_ANY, "%s: unmatched ID - exiting", __func__); - return -ENODEV; - } - /* set required alternate setting */ hostif = interface->cur_altsetting; if (hostif->desc.bAlternateSetting != 3) { @@ -2105,45 +2155,22 @@ static int gigaset_probe(struct usb_interface *interface, * - three for the different uses of the default control pipe * - three for each isochronous pipe */ - ucs->urb_int_in = usb_alloc_urb(0, SLAB_KERNEL); - if (!ucs->urb_int_in) { - dev_err(cs->dev, "no free urbs available\n"); - goto error; - } - ucs->urb_cmd_in = usb_alloc_urb(0, SLAB_KERNEL); - if (!ucs->urb_cmd_in) { - dev_err(cs->dev, "no free urbs available\n"); - goto error; - } - ucs->urb_cmd_out = usb_alloc_urb(0, SLAB_KERNEL); - if (!ucs->urb_cmd_out) { - dev_err(cs->dev, "no free urbs available\n"); - goto error; - } - ucs->urb_ctrl = usb_alloc_urb(0, SLAB_KERNEL); - if (!ucs->urb_ctrl) { - dev_err(cs->dev, "no free urbs available\n"); - goto error; - } + if (!(ucs->urb_int_in = usb_alloc_urb(0, SLAB_KERNEL)) || + !(ucs->urb_cmd_in = usb_alloc_urb(0, SLAB_KERNEL)) || + !(ucs->urb_cmd_out = usb_alloc_urb(0, SLAB_KERNEL)) || + !(ucs->urb_ctrl = usb_alloc_urb(0, SLAB_KERNEL))) + goto allocerr; for (j = 0; j < 2; ++j) { ubc = cs->bcs[j].hw.bas; - for (i = 0; i < BAS_OUTURBS; ++i) { - ubc->isoouturbs[i].urb = - usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL); - if (!ubc->isoouturbs[i].urb) { - dev_err(cs->dev, "no free urbs available\n"); - goto error; - } - } - for (i = 0; i < BAS_INURBS; ++i) { - ubc->isoinurbs[i] = - usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL); - if (!ubc->isoinurbs[i]) { - dev_err(cs->dev, "no free urbs available\n"); - goto error; - } - } + for (i = 0; i < BAS_OUTURBS; ++i) + if (!(ubc->isoouturbs[i].urb = + usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL))) + goto allocerr; + for (i = 0; i < BAS_INURBS; ++i) + if (!(ubc->isoinurbs[i] = + usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL))) + goto allocerr; } ucs->rcvbuf = NULL; @@ -2156,15 +2183,14 @@ static int gigaset_probe(struct usb_interface *interface, (endpoint->bEndpointAddress) & 0x0f), ucs->int_in_buf, 3, read_int_callback, cs, endpoint->bInterval); - ret = usb_submit_urb(ucs->urb_int_in, SLAB_KERNEL); - if (ret) { + if ((rc = usb_submit_urb(ucs->urb_int_in, SLAB_KERNEL)) != 0) { dev_err(cs->dev, "could not submit interrupt URB: %s\n", - get_usb_statmsg(ret)); + get_usb_rcmsg(rc)); goto error; } /* tell the device that the driver is ready */ - if ((ret = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0) + if ((rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0) goto error; /* tell common part that the device is ready */ @@ -2179,6 +2205,8 @@ static int gigaset_probe(struct usb_interface *interface, return 0; +allocerr: + dev_err(cs->dev, "could not allocate URBs\n"); error: freeurbs(cs); usb_set_intfdata(interface, NULL); @@ -2193,19 +2221,34 @@ static void gigaset_disconnect(struct usb_interface *interface) { struct cardstate *cs; struct bas_cardstate *ucs; + int j; cs = usb_get_intfdata(interface); ucs = cs->hw.bas; dev_info(cs->dev, "disconnecting Gigaset base\n"); + + /* mark base as not ready, all channels disconnected */ + atomic_set(&ucs->basstate, 0); + + /* tell LL all channels are down */ + //FIXME shouldn't gigaset_stop() do this? + for (j = 0; j < 2; ++j) + gigaset_bchannel_down(cs->bcs + j); + + /* stop driver (common part) */ gigaset_stop(cs); + + /* stop timers and URBs, free ressources */ + del_timer_sync(&ucs->timer_ctrl); + del_timer_sync(&ucs->timer_atrdy); + del_timer_sync(&ucs->timer_cmd_in); freeurbs(cs); usb_set_intfdata(interface, NULL); kfree(ucs->rcvbuf); ucs->rcvbuf = NULL; ucs->rcvbuf_size = 0; - atomic_set(&ucs->basstate, 0); usb_put_dev(ucs->udev); ucs->interface = NULL; ucs->udev = NULL; @@ -2277,6 +2320,8 @@ error: if (cardstate) */ static void __exit bas_gigaset_exit(void) { + struct bas_cardstate *ucs = cardstate->hw.bas; + gigaset_blockdriver(driver); /* => probe will fail * => no gigaset_start any more */ @@ -2284,14 +2329,26 @@ static void __exit bas_gigaset_exit(void) gigaset_shutdown(cardstate); /* from now on, no isdn callback should be possible */ - if (atomic_read(&cardstate->hw.bas->basstate) & BS_ATOPEN) { - gig_dbg(DEBUG_ANY, "closing AT channel"); - if (req_submit(cardstate->bcs, - HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT) >= 0) { - /* successfully submitted */ - //FIXME wait for completion? - } + /* close all still open channels */ + if (atomic_read(&ucs->basstate) & BS_B1OPEN) { + gig_dbg(DEBUG_INIT, "closing B1 channel"); + usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0), + HD_CLOSE_B1CHANNEL, OUT_VENDOR_REQ, 0, 0, + NULL, 0, BAS_TIMEOUT); } + if (atomic_read(&ucs->basstate) & BS_B2OPEN) { + gig_dbg(DEBUG_INIT, "closing B2 channel"); + usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0), + HD_CLOSE_B2CHANNEL, OUT_VENDOR_REQ, 0, 0, + NULL, 0, BAS_TIMEOUT); + } + if (atomic_read(&ucs->basstate) & BS_ATOPEN) { + gig_dbg(DEBUG_INIT, "closing AT channel"); + usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0), + HD_CLOSE_ATCHANNEL, OUT_VENDOR_REQ, 0, 0, + NULL, 0, BAS_TIMEOUT); + } + atomic_set(&ucs->basstate, 0); /* deregister this driver with the USB subsystem */ usb_deregister(&gigaset_usb_driver); diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c index 749b3da1236e..e55767b2ccd3 100644 --- a/drivers/isdn/gigaset/common.c +++ b/drivers/isdn/gigaset/common.c @@ -781,8 +781,7 @@ error: if (cs) } EXPORT_SYMBOL_GPL(gigaset_initcs); -/* ReInitialize the b-channel structure */ -/* e.g. called on hangup, disconnect */ +/* ReInitialize the b-channel structure on hangup */ void gigaset_bcs_reinit(struct bc_state *bcs) { struct sk_buff *skb; diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c index 1ba3424a286b..18e05c09b71c 100644 --- a/drivers/isdn/gigaset/ev-layer.c +++ b/drivers/isdn/gigaset/ev-layer.c @@ -373,6 +373,9 @@ struct reply_t gigaset_tab_cid_m10x[] = /* for M10x */ {EV_TIMEOUT, 750,750, -1, 0, 0, {ACT_CONNTIMEOUT}}, + /* B channel closed (general case) */ + {EV_BC_CLOSED, -1, -1, -1, -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME + /* misc. */ {EV_PROTO_L2, -1, -1, -1, -1,-1, {ACT_PROTO_L2}}, //FIXME diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h index 9d21ba8757b0..22b9693f7c0a 100644 --- a/drivers/isdn/gigaset/gigaset.h +++ b/drivers/isdn/gigaset/gigaset.h @@ -75,7 +75,7 @@ extern int gigaset_debuglevel; /* "needs" cast to (enum debuglevel) */ * e.g. 'insmod usb_gigaset.o debug=0x2c' will set DEBUG_OPEN, DEBUG_CMD and * DEBUG_INTR. */ -enum debuglevel { /* up to 24 bits (atomic_t) */ +enum debuglevel { DEBUG_REG = 0x0002, /* serial port I/O register operations */ DEBUG_OPEN = 0x0004, /* open/close serial port */ DEBUG_INTR = 0x0008, /* interrupt processing */ @@ -141,7 +141,7 @@ enum debuglevel { /* up to 24 bits (atomic_t) */ printk(KERN_DEBUG KBUILD_MODNAME ": " format "\n", \ ## arg); \ } while (0) -#define DEBUG_DEFAULT (DEBUG_INIT | DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ) +#define DEBUG_DEFAULT (DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ) #else @@ -627,8 +627,7 @@ struct gigaset_ops { /* Called by gigaset_freecs() for freeing bcs->hw.xxx */ int (*freebcshw)(struct bc_state *bcs); - /* Called by gigaset_stop() or gigaset_bchannel_down() for resetting - bcs->hw.xxx */ + /* Called by gigaset_bchannel_down() for resetting bcs->hw.xxx */ void (*reinitbcshw)(struct bc_state *bcs); /* Called by gigaset_initcs() for setting up cs->hw.xxx */ diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c index 0815dbfb8291..1654fa413575 100644 --- a/drivers/isdn/gigaset/i4l.c +++ b/drivers/isdn/gigaset/i4l.c @@ -73,7 +73,7 @@ static int writebuf_from_LL(int driverID, int channel, int ack, len, skblen, (unsigned) skb->head[0], (unsigned) skb->head[1]); /* pass to device-specific module */ - return cs->ops->send_skb(bcs, skb); //FIXME cs->ops->send_skb() must handle !cs->connected correctly + return cs->ops->send_skb(bcs, skb); } void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb) diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c index 45f017ed6e8c..8667daaa1a82 100644 --- a/drivers/isdn/gigaset/isocdata.c +++ b/drivers/isdn/gigaset/isocdata.c @@ -992,14 +992,18 @@ int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb) int len = skb->len; unsigned long flags; + spin_lock_irqsave(&bcs->cs->lock, flags); + if (!bcs->cs->connected) { + spin_unlock_irqrestore(&bcs->cs->lock, flags); + return -ENODEV; + } + skb_queue_tail(&bcs->squeue, skb); gig_dbg(DEBUG_ISO, "%s: skb queued, qlen=%d", __func__, skb_queue_len(&bcs->squeue)); /* tasklet submits URB if necessary */ - spin_lock_irqsave(&bcs->cs->lock, flags); - if (bcs->cs->connected) - tasklet_schedule(&bcs->hw.bas->sent_tasklet); + tasklet_schedule(&bcs->hw.bas->sent_tasklet); spin_unlock_irqrestore(&bcs->cs->lock, flags); return len; /* ok so far */ From 3b5fd59fdd2e656dd4d10f2cedb41a7519b131b2 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Sat, 22 Apr 2006 02:35:41 -0700 Subject: [PATCH 034/160] [PATCH] x86_64: sparsemem does not need node_mem_map Seems we are trying to init the node_mem_map when we don't need to, for example when SPARSEMEM is enabled. This causes the error below during compilation. Use CONFIG_FLAT_NODE_MEM_MAP to gate allocation and init. arch/x86_64/mm/numa.c: In function `setup_node_zones': arch/x86_64/mm/numa.c:191: error: structure has no member named `node_mem_map' Signed-off-by: Andy Whitcroft Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/mm/numa.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index cc02573a3271..b2fac14baac0 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -188,11 +188,13 @@ void __init setup_node_zones(int nodeid) memory. */ memmapsize = sizeof(struct page) * (end_pfn-start_pfn); limit = end_pfn << PAGE_SHIFT; +#ifdef CONFIG_FLAT_NODE_MEM_MAP NODE_DATA(nodeid)->node_mem_map = __alloc_bootmem_core(NODE_DATA(nodeid)->bdata, memmapsize, SMP_CACHE_BYTES, round_down(limit - memmapsize, PAGE_SIZE), limit); +#endif size_zones(zones, holes, start_pfn, end_pfn); free_area_init_node(nodeid, NODE_DATA(nodeid), zones, From 304dbdb7a4fbb7f40a6ad5c5836fdd456c233c63 Mon Sep 17 00:00:00 2001 From: Lee Schermerhorn Date: Sat, 22 Apr 2006 02:35:48 -0700 Subject: [PATCH 035/160] [PATCH] add migratepage address space op to shmem Basic problem: pages of a shared memory segment can only be migrated once. In 2.6.16 through 2.6.17-rc1, shared memory mappings do not have a migratepage address space op. Therefore, migrate_pages() falls back to default processing. In this path, it will try to pageout() dirty pages. Once a shared memory page has been migrated it becomes dirty, so migrate_pages() will try to page it out. However, because the page count is 3 [cache + current + pte], pageout() will return PAGE_KEEP because is_page_cache_freeable() returns false. This will abort all subsequent migrations. This patch adds a migratepage address space op to shared memory segments to avoid taking the default path. We use the "migrate_page()" function because it knows how to migrate dirty pages. This allows shared memory segment pages to migrate, subject to other conditions such as # pte's referencing the page [page_mapcount(page)], when requested. I think this is safe. If we're migrating a shared memory page, then we found the page via a page table, so it must be in memory. Can be verified with memtoy and the shmem-mbind-test script, both available at: http://free.linux.hp.com/~lts/Tools/ Signed-off-by: Lee Schermerhorn Acked-by: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/shmem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/shmem.c b/mm/shmem.c index 37eaf42ed2c6..4c5e68e4e9ae 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -46,6 +46,8 @@ #include #include #include +#include + #include #include #include @@ -2173,6 +2175,7 @@ static struct address_space_operations shmem_aops = { .prepare_write = shmem_prepare_write, .commit_write = simple_commit_write, #endif + .migratepage = migrate_page, }; static struct file_operations shmem_file_operations = { From ddbe3eec596fc2c6a513717168217bd19c901880 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 22 Apr 2006 02:35:57 -0700 Subject: [PATCH 036/160] [PATCH] x86_64: Pass -32 to the assembler when compiling the 32bit vsyscall pages This quietens warnings and actually fixes a bug. The unwind tables would come out wrong without -32, causing pthread cancellation during them to crash in the gcc runtime. The problem seems to only happen with newer binutils (it doesn't happen with 2.16.91.0.2 but happens wit 2.16.91.0.5) Thanks to David Altobelli and Brian Baker for test case and initial analysis. Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/ia32/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86_64/ia32/Makefile b/arch/x86_64/ia32/Makefile index 929e6b0771f8..e9263b4975e0 100644 --- a/arch/x86_64/ia32/Makefile +++ b/arch/x86_64/ia32/Makefile @@ -27,5 +27,5 @@ $(obj)/vsyscall-sysenter.so $(obj)/vsyscall-syscall.so: \ $(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE $(call if_changed,syscall) -AFLAGS_vsyscall-sysenter.o = -m32 -AFLAGS_vsyscall-syscall.o = -m32 +AFLAGS_vsyscall-sysenter.o = -m32 -Wa,-32 +AFLAGS_vsyscall-syscall.o = -m32 -Wa,-32 From 5b20192727ef2c047343a043ee4fbda67e2beef4 Mon Sep 17 00:00:00 2001 From: Mike Waychison Date: Sat, 22 Apr 2006 02:36:06 -0700 Subject: [PATCH 037/160] [PATCH] x86_64: Fix a race in the free_iommu path We do this by removing a micro-optimization that tries to avoid grabbing the iommu_bitmap_lock spinlock and using a bus-locked operation. This still races with other simultaneous alloc_iommu or free_iommu(size > 1) which both use bus-unlocked operations. The end result of this race is eventually ending up with an iommu_gart_bitmap that has bits errornously set all over, making large contiguous iommu space allocations fail with 'PCI-DMA: Out of IOMMU space'. Signed-off-by: Mike Waychison Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/pci-gart.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index a6c01e121266..9d3d76c85ae7 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -112,10 +112,6 @@ static unsigned long alloc_iommu(int size) static void free_iommu(unsigned long offset, int size) { unsigned long flags; - if (size == 1) { - clear_bit(offset, iommu_gart_bitmap); - return; - } spin_lock_irqsave(&iommu_bitmap_lock, flags); __clear_bit_string(iommu_gart_bitmap, offset, size); spin_unlock_irqrestore(&iommu_bitmap_lock, flags); From 8c4335a87c9785d2102ab23f09393038e1663314 Mon Sep 17 00:00:00 2001 From: "akpm@osdl.org" Date: Sat, 22 Apr 2006 02:36:15 -0700 Subject: [PATCH 038/160] [PATCH] Altix snsc: duplicate kobject fix from: Greg Howard Fix Altix system controller (snsc) device names to include the slot number of the blade whose associated system controller is the target of the device interface. Including the slot number avoids a problem we're currently having where slots within the same enclosure are attempting to create multiple kobjects with identical names. Signed-off-by: Greg Howard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/snsc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c index b543821d8cb4..56c8243cdb73 100644 --- a/drivers/char/snsc.c +++ b/drivers/char/snsc.c @@ -390,7 +390,8 @@ scdrv_init(void) format_module_id(devnamep, geo_module(geoid), MODULE_FORMAT_BRIEF); devnamep = devname + strlen(devname); - sprintf(devnamep, "#%d", geo_slab(geoid)); + sprintf(devnamep, "^%d#%d", geo_slot(geoid), + geo_slab(geoid)); /* allocate sysctl device data */ scd = kzalloc(sizeof (struct sysctl_data_s), From b9251b823b5e921c894eb135cb6c64abf483f50e Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Sat, 22 Apr 2006 02:36:24 -0700 Subject: [PATCH 039/160] [PATCH] Fix reiserfs deadlock reiserfs_cache_default_acl() should return whether we successfully found the acl or not. We have to return correct value even if reiserfs_get_acl() returns error code and not just 0. Otherwise callers such as reiserfs_mkdir() can unnecessarily lock the xattrs and later functions such as reiserfs_new_inode() fail to notice that we have already taken the lock and try to take it again with obvious consequences. Signed-off-by: Jan Kara Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/reiserfs/xattr_acl.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c index 58c418fbca2c..97ae1b92bc47 100644 --- a/fs/reiserfs/xattr_acl.c +++ b/fs/reiserfs/xattr_acl.c @@ -408,8 +408,9 @@ int reiserfs_cache_default_acl(struct inode *inode) acl = reiserfs_get_acl(inode, ACL_TYPE_DEFAULT); reiserfs_read_unlock_xattrs(inode->i_sb); reiserfs_read_unlock_xattr_i(inode); - ret = acl ? 1 : 0; - posix_acl_release(acl); + ret = (acl && !IS_ERR(acl)); + if (ret) + posix_acl_release(acl); } return ret; From 59e89f3a091d5cf93f4b176aedcfded61ece5252 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:36:35 -0700 Subject: [PATCH 040/160] [PATCH] tpm: fix memory leak The eventname was kmalloc'd and not freed in the *_show functions. This bug was found by Coverity. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_bios.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index 537aa45d8c67..0549e2a35df8 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -306,6 +306,7 @@ static int tpm_binary_bios_measurements_show(struct seq_file *m, void *v) /* 5th: delimiter */ seq_putc(m, '\0'); + kfree(eventname); return 0; } @@ -353,6 +354,7 @@ static int tpm_ascii_bios_measurements_show(struct seq_file *m, void *v) /* 4th: eventname <= max + \'0' delimiter */ seq_printf(m, " %s\n", eventname); + kfree(eventname); return 0; } From 7c69a47f1badf40dfa2febac71df98d32b1b56d7 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:36:46 -0700 Subject: [PATCH 041/160] [PATCH] tpm: fix missing string A string corresponding to the tcpa_pc_event_id POST_CONTENTS was missing causing an overflow bug when access was attempted in the get_event_name function. This bug was found by Coverity. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_bios.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index 0549e2a35df8..5bcbaef53798 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -120,6 +120,7 @@ static const char* tcpa_pc_event_id_strings[] = { "S-CRTM Version", "S-CRTM Contents", "S-CRTM POST Contents", + "POST Contents", }; /* returns pointer to start of pos. entry of tcg log */ From 3c2f606a098b07f053904ec8b8f4d0e101c28b35 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:36:56 -0700 Subject: [PATCH 042/160] [PATCH] tpm: spacing cleanups The following patch set contains numerous changes to the base tpm driver (tpm.c) to support the next generation of TPM chips. The changes include new sysfs files because of more relevant data being available, a function to access the timeout and duration values for the chip, and changes to make use of those duration values. Duration in the TPM specification is defined as the maximum amount of time the chip could take to return the results. Commands are in one of three categories short, medium and long. Also included are cleanups of how the commands for the sysfs files are composed to reduce a bunch of redundant arrays. This patch: Fix minor spacing issues. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 5a3870477ef1..379c5d465579 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -46,7 +46,7 @@ static void user_reader_timeout(unsigned long ptr) schedule_work(&chip->work); } -static void timeout_work(void * ptr) +static void timeout_work(void *ptr) { struct tpm_chip *chip = ptr; @@ -387,7 +387,7 @@ int tpm_release(struct inode *inode, struct file *file) EXPORT_SYMBOL_GPL(tpm_release); ssize_t tpm_write(struct file *file, const char __user *buf, - size_t size, loff_t * off) + size_t size, loff_t *off) { struct tpm_chip *chip = file->private_data; int in_size = size, out_size; @@ -419,11 +419,10 @@ ssize_t tpm_write(struct file *file, const char __user *buf, return in_size; } - EXPORT_SYMBOL_GPL(tpm_write); -ssize_t tpm_read(struct file * file, char __user *buf, - size_t size, loff_t * off) +ssize_t tpm_read(struct file *file, char __user *buf, + size_t size, loff_t *off) { struct tpm_chip *chip = file->private_data; int ret_size; From beed53a1aaeaae4eb93297c23f1598a726716adf Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:37:05 -0700 Subject: [PATCH 043/160] [PATCH] tpm: reorganize sysfs files Many of the sysfs files were calling the TPM_GetCapability command with array. Since for 1.2 more sysfs files of this type are coming I am generalizing the array so there can be one array and the unique parts can be filled in just before the command is called. Signed-off-by: Kylene Hall Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.c | 145 ++++++++++++++++++++++++----------------- 1 file changed, 86 insertions(+), 59 deletions(-) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 379c5d465579..187bcdaf7bf6 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -119,17 +119,57 @@ out: } #define TPM_DIGEST_SIZE 20 -#define CAP_PCR_RESULT_SIZE 18 -static const u8 cap_pcr[] = { +#define TPM_ERROR_SIZE 10 +#define TPM_RET_CODE_IDX 6 +#define TPM_GET_CAP_RET_SIZE_IDX 10 +#define TPM_GET_CAP_RET_UINT32_1_IDX 14 +#define TPM_GET_CAP_RET_UINT32_2_IDX 18 +#define TPM_GET_CAP_RET_UINT32_3_IDX 22 +#define TPM_GET_CAP_RET_UINT32_4_IDX 26 + +#define TPM_CAP_IDX 13 +#define TPM_CAP_SUBCAP_IDX 21 + +enum tpm_capabilities { + TPM_CAP_PROP = 5, +}; + +enum tpm_sub_capabilities { + TPM_CAP_PROP_PCR = 0x1, + TPM_CAP_PROP_MANUFACTURER = 0x3, +}; + +/* + * This is a semi generic GetCapability command for use + * with the capability type TPM_CAP_PROP or TPM_CAP_FLAG + * and their associated sub_capabilities. + */ + +static const u8 tpm_cap[] = { 0, 193, /* TPM_TAG_RQU_COMMAND */ 0, 0, 0, 22, /* length */ 0, 0, 0, 101, /* TPM_ORD_GetCapability */ - 0, 0, 0, 5, - 0, 0, 0, 4, - 0, 0, 1, 1 + 0, 0, 0, 0, /* TPM_CAP_ */ + 0, 0, 0, 4, /* TPM_CAP_SUB_ size */ + 0, 0, 1, 0 /* TPM_CAP_SUB_ */ }; -#define READ_PCR_RESULT_SIZE 30 +static ssize_t transmit_cmd(struct tpm_chip *chip, u8 *data, int len, + char *desc) +{ + int err; + + len = tpm_transmit(chip, data, len); + if (len < 0) + return len; + if (len == TPM_ERROR_SIZE) { + err = be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX))); + dev_dbg(chip->dev, "A TPM error (%d) occurred %s\n", err, desc); + return err; + } + return 0; +} + static const u8 pcrread[] = { 0, 193, /* TPM_TAG_RQU_COMMAND */ 0, 0, 0, 14, /* length */ @@ -140,8 +180,8 @@ static const u8 pcrread[] = { ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr, char *buf) { - u8 data[READ_PCR_RESULT_SIZE]; - ssize_t len; + u8 data[30]; + ssize_t rc; int i, j, num_pcrs; __be32 index; char *str = buf; @@ -150,29 +190,24 @@ ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr, if (chip == NULL) return -ENODEV; - memcpy(data, cap_pcr, sizeof(cap_pcr)); - if ((len = tpm_transmit(chip, data, sizeof(data))) - < CAP_PCR_RESULT_SIZE) { - dev_dbg(chip->dev, "A TPM error (%d) occurred " - "attempting to determine the number of PCRS\n", - be32_to_cpu(*((__be32 *) (data + 6)))); + memcpy(data, tpm_cap, sizeof(tpm_cap)); + data[TPM_CAP_IDX] = TPM_CAP_PROP; + data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_PCR; + + rc = transmit_cmd(chip, data, sizeof(data), + "attempting to determine the number of PCRS"); + if (rc) return 0; - } num_pcrs = be32_to_cpu(*((__be32 *) (data + 14))); - for (i = 0; i < num_pcrs; i++) { memcpy(data, pcrread, sizeof(pcrread)); index = cpu_to_be32(i); memcpy(data + 10, &index, 4); - if ((len = tpm_transmit(chip, data, sizeof(data))) - < READ_PCR_RESULT_SIZE){ - dev_dbg(chip->dev, "A TPM error (%d) occurred" - " attempting to read PCR %d of %d\n", - be32_to_cpu(*((__be32 *) (data + 6))), - i, num_pcrs); + rc = transmit_cmd(chip, data, sizeof(data), + "attempting to read a PCR"); + if (rc) goto out; - } str += sprintf(str, "PCR-%02d: ", i); for (j = 0; j < TPM_DIGEST_SIZE; j++) str += sprintf(str, "%02X ", *(data + 10 + j)); @@ -194,7 +229,7 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr, char *buf) { u8 *data; - ssize_t len; + ssize_t err; int i, rc; char *str = buf; @@ -208,14 +243,10 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr, memcpy(data, readpubek, sizeof(readpubek)); - if ((len = tpm_transmit(chip, data, READ_PUBEK_RESULT_SIZE)) < - READ_PUBEK_RESULT_SIZE) { - dev_dbg(chip->dev, "A TPM error (%d) occurred " - "attempting to read the PUBEK\n", - be32_to_cpu(*((__be32 *) (data + 6)))); - rc = 0; + err = transmit_cmd(chip, data, READ_PUBEK_RESULT_SIZE, + "attempting to read the PUBEK"); + if (err) goto out; - } /* ignore header 10 bytes @@ -245,63 +276,59 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr, if ((i + 1) % 16 == 0) str += sprintf(str, "\n"); } - rc = str - buf; out: + rc = str - buf; kfree(data); return rc; } EXPORT_SYMBOL_GPL(tpm_show_pubek); -#define CAP_VER_RESULT_SIZE 18 +#define CAP_VERSION_1_1 6 +#define CAP_VERSION_IDX 13 static const u8 cap_version[] = { 0, 193, /* TPM_TAG_RQU_COMMAND */ 0, 0, 0, 18, /* length */ 0, 0, 0, 101, /* TPM_ORD_GetCapability */ - 0, 0, 0, 6, + 0, 0, 0, 0, 0, 0, 0, 0 }; -#define CAP_MANUFACTURER_RESULT_SIZE 18 -static const u8 cap_manufacturer[] = { - 0, 193, /* TPM_TAG_RQU_COMMAND */ - 0, 0, 0, 22, /* length */ - 0, 0, 0, 101, /* TPM_ORD_GetCapability */ - 0, 0, 0, 5, - 0, 0, 0, 4, - 0, 0, 1, 3 -}; - ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr, char *buf) { - u8 data[sizeof(cap_manufacturer)]; - ssize_t len; + u8 data[30]; + ssize_t rc; char *str = buf; struct tpm_chip *chip = dev_get_drvdata(dev); if (chip == NULL) return -ENODEV; - memcpy(data, cap_manufacturer, sizeof(cap_manufacturer)); + memcpy(data, tpm_cap, sizeof(tpm_cap)); + data[TPM_CAP_IDX] = TPM_CAP_PROP; + data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER; - if ((len = tpm_transmit(chip, data, sizeof(data))) < - CAP_MANUFACTURER_RESULT_SIZE) - return len; + rc = transmit_cmd(chip, data, sizeof(data), + "attempting to determine the manufacturer"); + if (rc) + return 0; str += sprintf(str, "Manufacturer: 0x%x\n", - be32_to_cpu(*((__be32 *) (data + 14)))); + be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX)))); memcpy(data, cap_version, sizeof(cap_version)); + data[CAP_VERSION_IDX] = CAP_VERSION_1_1; + rc = transmit_cmd(chip, data, sizeof(data), + "attempting to determine the 1.1 version"); + if (rc) + goto out; - if ((len = tpm_transmit(chip, data, sizeof(data))) < - CAP_VER_RESULT_SIZE) - return len; - - str += - sprintf(str, "TCG version: %d.%d\nFirmware version: %d.%d\n", - (int) data[14], (int) data[15], (int) data[16], - (int) data[17]); + str += sprintf(str, + "TCG version: %d.%d\nFirmware version: %d.%d\n", + (int) data[14], (int) data[15], (int) data[16], + (int) data[17]); +out: return str - buf; } EXPORT_SYMBOL_GPL(tpm_show_caps); From 90dda520c1962d55a0e1d2571deed0d75fd6d6f1 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:37:15 -0700 Subject: [PATCH 044/160] [PATCH] tpm: chip struct update To assist with chip management and better support the possibility of having multiple TPMs in the system of the same kind, the struct tpm_vendor_specific member of the tpm_chip was changed from a pointer to an instance. This patch changes that declaration and fixes up all accesses to the structure member except in tpm_infineon which is coming in a patch from Marcel Selhorst. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.c | 48 +++++++++++++++++------------------- drivers/char/tpm/tpm.h | 2 +- drivers/char/tpm/tpm_atmel.c | 26 +++++++++---------- drivers/char/tpm/tpm_nsc.c | 32 ++++++++++++------------ 4 files changed, 53 insertions(+), 55 deletions(-) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 187bcdaf7bf6..50013eb8cf1e 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -78,7 +78,7 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, down(&chip->tpm_mutex); - if ((rc = chip->vendor->send(chip, (u8 *) buf, count)) < 0) { + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { dev_err(chip->dev, "tpm_transmit: tpm_send: error %zd\n", rc); goto out; @@ -86,13 +86,12 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, stop = jiffies + 2 * 60 * HZ; do { - u8 status = chip->vendor->status(chip); - if ((status & chip->vendor->req_complete_mask) == - chip->vendor->req_complete_val) { + u8 status = chip->vendor.status(chip); + if ((status & chip->vendor.req_complete_mask) == + chip->vendor.req_complete_val) goto out_recv; - } - if ((status == chip->vendor->req_canceled)) { + if ((status == chip->vendor.req_canceled)) { dev_err(chip->dev, "Operation Canceled\n"); rc = -ECANCELED; goto out; @@ -102,14 +101,13 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, rmb(); } while (time_before(jiffies, stop)); - - chip->vendor->cancel(chip); + chip->vendor.cancel(chip); dev_err(chip->dev, "Operation Timed out\n"); rc = -ETIME; goto out; out_recv: - rc = chip->vendor->recv(chip, (u8 *) buf, bufsiz); + rc = chip->vendor.recv(chip, (u8 *) buf, bufsiz); if (rc < 0) dev_err(chip->dev, "tpm_transmit: tpm_recv: error %zd\n", rc); @@ -340,7 +338,7 @@ ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr, if (chip == NULL) return 0; - chip->vendor->cancel(chip); + chip->vendor.cancel(chip); return count; } EXPORT_SYMBOL_GPL(tpm_store_cancel); @@ -356,7 +354,7 @@ int tpm_open(struct inode *inode, struct file *file) spin_lock(&driver_lock); list_for_each_entry(pos, &tpm_chip_list, list) { - if (pos->vendor->miscdev.minor == minor) { + if (pos->vendor.miscdev.minor == minor) { chip = pos; break; } @@ -488,14 +486,14 @@ void tpm_remove_hardware(struct device *dev) spin_unlock(&driver_lock); dev_set_drvdata(dev, NULL); - misc_deregister(&chip->vendor->miscdev); - kfree(chip->vendor->miscdev.name); + misc_deregister(&chip->vendor.miscdev); + kfree(chip->vendor.miscdev.name); - sysfs_remove_group(&dev->kobj, chip->vendor->attr_group); + sysfs_remove_group(&dev->kobj, chip->vendor.attr_group); tpm_bios_log_teardown(chip->bios_dir); - dev_mask[chip->dev_num / TPM_NUM_MASK_ENTRIES ] &= - ~(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES)); + dev_mask[chip->dev_num / TPM_NUM_MASK_ENTRIES] &= + ~(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES)); kfree(chip); @@ -569,7 +567,7 @@ int tpm_register_hardware(struct device *dev, struct tpm_vendor_specific *entry) chip->user_read_timer.function = user_reader_timeout; chip->user_read_timer.data = (unsigned long) chip; - chip->vendor = entry; + memcpy(&chip->vendor, entry, sizeof(struct tpm_vendor_specific)); chip->dev_num = -1; @@ -588,22 +586,22 @@ dev_num_search_complete: kfree(chip); return -ENODEV; } else if (chip->dev_num == 0) - chip->vendor->miscdev.minor = TPM_MINOR; + chip->vendor.miscdev.minor = TPM_MINOR; else - chip->vendor->miscdev.minor = MISC_DYNAMIC_MINOR; + chip->vendor.miscdev.minor = MISC_DYNAMIC_MINOR; devname = kmalloc(DEVNAME_SIZE, GFP_KERNEL); scnprintf(devname, DEVNAME_SIZE, "%s%d", "tpm", chip->dev_num); - chip->vendor->miscdev.name = devname; + chip->vendor.miscdev.name = devname; - chip->vendor->miscdev.dev = dev; + chip->vendor.miscdev.dev = dev; chip->dev = get_device(dev); - if (misc_register(&chip->vendor->miscdev)) { + if (misc_register(&chip->vendor.miscdev)) { dev_err(chip->dev, "unable to misc_register %s, minor %d\n", - chip->vendor->miscdev.name, - chip->vendor->miscdev.minor); + chip->vendor.miscdev.name, + chip->vendor.miscdev.minor); put_device(dev); kfree(chip); dev_mask[i] &= !(1 << j); @@ -618,7 +616,7 @@ dev_num_search_complete: spin_unlock(&driver_lock); - sysfs_create_group(&dev->kobj, chip->vendor->attr_group); + sysfs_create_group(&dev->kobj, chip->vendor.attr_group); chip->bios_dir = tpm_bios_log_setup(devname); diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index dec0224b4478..a203963efaab 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -81,7 +81,7 @@ struct tpm_chip { struct work_struct work; struct semaphore tpm_mutex; /* tpm is processing */ - struct tpm_vendor_specific *vendor; + struct tpm_vendor_specific vendor; struct dentry **bios_dir; diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c index ff3654964fe3..26787976ef1a 100644 --- a/drivers/char/tpm/tpm_atmel.c +++ b/drivers/char/tpm/tpm_atmel.c @@ -47,12 +47,12 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) return -EIO; for (i = 0; i < 6; i++) { - status = ioread8(chip->vendor->iobase + 1); + status = ioread8(chip->vendor.iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { dev_err(chip->dev, "error reading header\n"); return -EIO; } - *buf++ = ioread8(chip->vendor->iobase); + *buf++ = ioread8(chip->vendor.iobase); } /* size of the data received */ @@ -63,7 +63,7 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) dev_err(chip->dev, "Recv size(%d) less than available space\n", size); for (; i < size; i++) { /* clear the waiting data anyway */ - status = ioread8(chip->vendor->iobase + 1); + status = ioread8(chip->vendor.iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { dev_err(chip->dev, "error reading data\n"); return -EIO; @@ -74,16 +74,16 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) /* read all the data available */ for (; i < size; i++) { - status = ioread8(chip->vendor->iobase + 1); + status = ioread8(chip->vendor.iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { dev_err(chip->dev, "error reading data\n"); return -EIO; } - *buf++ = ioread8(chip->vendor->iobase); + *buf++ = ioread8(chip->vendor.iobase); } /* make sure data available is gone */ - status = ioread8(chip->vendor->iobase + 1); + status = ioread8(chip->vendor.iobase + 1); if (status & ATML_STATUS_DATA_AVAIL) { dev_err(chip->dev, "data available is stuck\n"); @@ -100,7 +100,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) dev_dbg(chip->dev, "tpm_atml_send:\n"); for (i = 0; i < count; i++) { dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]); - iowrite8(buf[i], chip->vendor->iobase); + iowrite8(buf[i], chip->vendor.iobase); } return count; @@ -108,12 +108,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) static void tpm_atml_cancel(struct tpm_chip *chip) { - iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1); + iowrite8(ATML_STATUS_ABORT, chip->vendor.iobase + 1); } static u8 tpm_atml_status(struct tpm_chip *chip) { - return ioread8(chip->vendor->iobase + 1); + return ioread8(chip->vendor.iobase + 1); } static struct file_operations atmel_ops = { @@ -159,10 +159,10 @@ static void atml_plat_remove(void) struct tpm_chip *chip = dev_get_drvdata(&pdev->dev); if (chip) { - if (chip->vendor->have_region) - atmel_release_region(chip->vendor->base, - chip->vendor->region_size); - atmel_put_base_addr(chip->vendor); + if (chip->vendor.have_region) + atmel_release_region(chip->vendor.base, + chip->vendor.region_size); + atmel_put_base_addr(chip->vendor.iobase); tpm_remove_hardware(chip->dev); platform_device_unregister(pdev); } diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c index 680a8e331887..3dbbe9686c76 100644 --- a/drivers/char/tpm/tpm_nsc.c +++ b/drivers/char/tpm/tpm_nsc.c @@ -71,7 +71,7 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data) unsigned long stop; /* status immediately available check */ - *data = inb(chip->vendor->base + NSC_STATUS); + *data = inb(chip->vendor.base + NSC_STATUS); if ((*data & mask) == val) return 0; @@ -79,7 +79,7 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data) stop = jiffies + 10 * HZ; do { msleep(TPM_TIMEOUT); - *data = inb(chip->vendor->base + 1); + *data = inb(chip->vendor.base + 1); if ((*data & mask) == val) return 0; } @@ -94,9 +94,9 @@ static int nsc_wait_for_ready(struct tpm_chip *chip) unsigned long stop; /* status immediately available check */ - status = inb(chip->vendor->base + NSC_STATUS); + status = inb(chip->vendor.base + NSC_STATUS); if (status & NSC_STATUS_OBF) - status = inb(chip->vendor->base + NSC_DATA); + status = inb(chip->vendor.base + NSC_DATA); if (status & NSC_STATUS_RDY) return 0; @@ -104,9 +104,9 @@ static int nsc_wait_for_ready(struct tpm_chip *chip) stop = jiffies + 100; do { msleep(TPM_TIMEOUT); - status = inb(chip->vendor->base + NSC_STATUS); + status = inb(chip->vendor.base + NSC_STATUS); if (status & NSC_STATUS_OBF) - status = inb(chip->vendor->base + NSC_DATA); + status = inb(chip->vendor.base + NSC_DATA); if (status & NSC_STATUS_RDY) return 0; } @@ -132,7 +132,7 @@ static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count) return -EIO; } if ((data = - inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_NORMAL) { + inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_NORMAL) { dev_err(chip->dev, "not in normal mode (0x%x)\n", data); return -EIO; @@ -148,7 +148,7 @@ static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count) } if (data & NSC_STATUS_F0) break; - *p = inb(chip->vendor->base + NSC_DATA); + *p = inb(chip->vendor.base + NSC_DATA); } if ((data & NSC_STATUS_F0) == 0 && @@ -156,7 +156,7 @@ static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count) dev_err(chip->dev, "F0 not set\n"); return -EIO; } - if ((data = inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_EOC) { + if ((data = inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_EOC) { dev_err(chip->dev, "expected end of command(0x%x)\n", data); return -EIO; @@ -182,7 +182,7 @@ static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count) * fix it. Not sure why this is needed, we followed the flow * chart in the manual to the letter. */ - outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND); + outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND); if (nsc_wait_for_ready(chip) != 0) return -EIO; @@ -192,7 +192,7 @@ static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count) return -EIO; } - outb(NSC_COMMAND_NORMAL, chip->vendor->base + NSC_COMMAND); + outb(NSC_COMMAND_NORMAL, chip->vendor.base + NSC_COMMAND); if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) { dev_err(chip->dev, "IBR timeout\n"); return -EIO; @@ -204,26 +204,26 @@ static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count) "IBF timeout (while writing data)\n"); return -EIO; } - outb(buf[i], chip->vendor->base + NSC_DATA); + outb(buf[i], chip->vendor.base + NSC_DATA); } if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) { dev_err(chip->dev, "IBF timeout\n"); return -EIO; } - outb(NSC_COMMAND_EOC, chip->vendor->base + NSC_COMMAND); + outb(NSC_COMMAND_EOC, chip->vendor.base + NSC_COMMAND); return count; } static void tpm_nsc_cancel(struct tpm_chip *chip) { - outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND); + outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND); } static u8 tpm_nsc_status(struct tpm_chip *chip) { - return inb(chip->vendor->base + NSC_STATUS); + return inb(chip->vendor.base + NSC_STATUS); } static struct file_operations nsc_ops = { @@ -268,7 +268,7 @@ static void __devexit tpm_nsc_remove(struct device *dev) { struct tpm_chip *chip = dev_get_drvdata(dev); if ( chip ) { - release_region(chip->vendor->base, 2); + release_region(chip->vendor.base, 2); tpm_remove_hardware(chip->dev); } } From e0dd03caf20d040a0a86b6bd74028ec9bda545f5 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:37:26 -0700 Subject: [PATCH 045/160] [PATCH] tpm: return chip from tpm_register_hardware Changes in the 1.2 TPM Specification make it necessary to update some fields of the chip structure in the initialization function after it is registered with tpm.c thus tpm_register_hardware was modified to return a pointer to the structure. This patch makes that change and the associated changes in tpm_atmel and tpm_nsc. The changes to tpm_infineon will be coming in a patch from Marcel Selhorst. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.c | 11 ++++++----- drivers/char/tpm/tpm.h | 10 +++++----- drivers/char/tpm/tpm_atmel.c | 32 ++++++++++++++++++++++---------- drivers/char/tpm/tpm_atmel.h | 25 +++++++++++-------------- drivers/char/tpm/tpm_nsc.c | 17 +++++++++++------ 5 files changed, 55 insertions(+), 40 deletions(-) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 50013eb8cf1e..5e58296f2832 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -544,7 +544,8 @@ EXPORT_SYMBOL_GPL(tpm_pm_resume); * upon errant exit from this function specific probe function should call * pci_disable_device */ -int tpm_register_hardware(struct device *dev, struct tpm_vendor_specific *entry) +struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vendor_specific + *entry) { #define DEVNAME_SIZE 7 @@ -555,7 +556,7 @@ int tpm_register_hardware(struct device *dev, struct tpm_vendor_specific *entry) /* Driver specific per-device data */ chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (chip == NULL) - return -ENOMEM; + return NULL; init_MUTEX(&chip->buffer_mutex); init_MUTEX(&chip->tpm_mutex); @@ -584,7 +585,7 @@ dev_num_search_complete: if (chip->dev_num < 0) { dev_err(dev, "No available tpm device numbers\n"); kfree(chip); - return -ENODEV; + return NULL; } else if (chip->dev_num == 0) chip->vendor.miscdev.minor = TPM_MINOR; else @@ -605,7 +606,7 @@ dev_num_search_complete: put_device(dev); kfree(chip); dev_mask[i] &= !(1 << j); - return -ENODEV; + return NULL; } spin_lock(&driver_lock); @@ -620,7 +621,7 @@ dev_num_search_complete: chip->bios_dir = tpm_bios_log_setup(devname); - return 0; + return chip; } EXPORT_SYMBOL_GPL(tpm_register_hardware); diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index a203963efaab..4f005345bf37 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -48,9 +48,9 @@ extern ssize_t tpm_store_cancel(struct device *, struct device_attribute *attr, struct tpm_chip; struct tpm_vendor_specific { - u8 req_complete_mask; - u8 req_complete_val; - u8 req_canceled; + const u8 req_complete_mask; + const u8 req_complete_val; + const u8 req_canceled; void __iomem *iobase; /* ioremapped address */ unsigned long base; /* TPM base address */ @@ -100,8 +100,8 @@ static inline void tpm_write_index(int base, int index, int value) outb(value & 0xFF, base+1); } -extern int tpm_register_hardware(struct device *, - struct tpm_vendor_specific *); +extern struct tpm_chip* tpm_register_hardware(struct device *, + const struct tpm_vendor_specific *); extern int tpm_open(struct inode *, struct file *); extern int tpm_release(struct inode *, struct file *); extern ssize_t tpm_write(struct file *, const char __user *, size_t, diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c index 26787976ef1a..58a258cec153 100644 --- a/drivers/char/tpm/tpm_atmel.c +++ b/drivers/char/tpm/tpm_atmel.c @@ -140,7 +140,7 @@ static struct attribute* atmel_attrs[] = { static struct attribute_group atmel_attr_grp = { .attrs = atmel_attrs }; -static struct tpm_vendor_specific tpm_atmel = { +static const struct tpm_vendor_specific tpm_atmel = { .recv = tpm_atml_recv, .send = tpm_atml_send, .cancel = tpm_atml_cancel, @@ -179,18 +179,22 @@ static struct device_driver atml_drv = { static int __init init_atmel(void) { int rc = 0; + void __iomem *iobase = NULL; + int have_region, region_size; + unsigned long base; + struct tpm_chip *chip; driver_register(&atml_drv); - if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) { + if ((iobase = atmel_get_base_addr(&base, ®ion_size)) == NULL) { rc = -ENODEV; goto err_unreg_drv; } - tpm_atmel.have_region = + have_region = (atmel_request_region - (tpm_atmel.base, tpm_atmel.region_size, - "tpm_atmel0") == NULL) ? 0 : 1; + (tpm_atmel.base, region_size, "tpm_atmel0") == NULL) ? 0 : 1; + if (IS_ERR (pdev = @@ -199,17 +203,25 @@ static int __init init_atmel(void) goto err_rel_reg; } - if ((rc = tpm_register_hardware(&pdev->dev, &tpm_atmel)) < 0) + if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_atmel))) { + rc = -ENODEV; goto err_unreg_dev; + } + + chip->vendor.iobase = iobase; + chip->vendor.base = base; + chip->vendor.have_region = have_region; + chip->vendor.region_size = region_size; + return 0; err_unreg_dev: platform_device_unregister(pdev); err_rel_reg: - atmel_put_base_addr(&tpm_atmel); - if (tpm_atmel.have_region) - atmel_release_region(tpm_atmel.base, - tpm_atmel.region_size); + atmel_put_base_addr(iobase); + if (have_region) + atmel_release_region(base, + region_size); err_unreg_drv: driver_unregister(&atml_drv); return rc; diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h index d3478aaadd77..2e68eeb8a2cd 100644 --- a/drivers/char/tpm/tpm_atmel.h +++ b/drivers/char/tpm/tpm_atmel.h @@ -28,13 +28,12 @@ #define atmel_request_region request_mem_region #define atmel_release_region release_mem_region -static inline void atmel_put_base_addr(struct tpm_vendor_specific - *vendor) +static inline void atmel_put_base_addr(void __iomem *iobase) { - iounmap(vendor->iobase); + iounmap(iobase); } -static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor) +static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size) { struct device_node *dn; unsigned long address, size; @@ -71,9 +70,9 @@ static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor) else size = reg[naddrc]; - vendor->base = address; - vendor->region_size = size; - return ioremap(vendor->base, vendor->region_size); + *base = address; + *region_size = size; + return ioremap(*base, *region_size); } #else #define atmel_getb(chip, offset) inb(chip->vendor->base + offset) @@ -106,14 +105,12 @@ static int atmel_verify_tpm11(void) return 0; } -static inline void atmel_put_base_addr(struct tpm_vendor_specific - *vendor) +static inline void atmel_put_base_addr(void __iomem *iobase) { } /* Determine where to talk to device */ -static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific - *vendor) +static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size) { int lo, hi; @@ -123,9 +120,9 @@ static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO); hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI); - vendor->base = (hi << 8) | lo; - vendor->region_size = 2; + *base = (hi << 8) | lo; + *region_size = 2; - return ioport_map(vendor->base, vendor->region_size); + return ioport_map(*base, *region_size); } #endif diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c index 3dbbe9686c76..4c8bc06c7d95 100644 --- a/drivers/char/tpm/tpm_nsc.c +++ b/drivers/char/tpm/tpm_nsc.c @@ -250,7 +250,7 @@ static struct attribute * nsc_attrs[] = { static struct attribute_group nsc_attr_grp = { .attrs = nsc_attrs }; -static struct tpm_vendor_specific tpm_nsc = { +static const struct tpm_vendor_specific tpm_nsc = { .recv = tpm_nsc_recv, .send = tpm_nsc_send, .cancel = tpm_nsc_cancel, @@ -286,7 +286,8 @@ static int __init init_nsc(void) int rc = 0; int lo, hi; int nscAddrBase = TPM_ADDR; - + struct tpm_chip *chip; + unsigned long base; /* verify that it is a National part (SID) */ if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) { @@ -300,7 +301,7 @@ static int __init init_nsc(void) hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI); lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO); - tpm_nsc.base = (hi<<8) | lo; + base = (hi<<8) | lo; /* enable the DPM module */ tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01); @@ -320,13 +321,15 @@ static int __init init_nsc(void) if ((rc = platform_device_register(pdev)) < 0) goto err_free_dev; - if (request_region(tpm_nsc.base, 2, "tpm_nsc0") == NULL ) { + if (request_region(base, 2, "tpm_nsc0") == NULL ) { rc = -EBUSY; goto err_unreg_dev; } - if ((rc = tpm_register_hardware(&pdev->dev, &tpm_nsc)) < 0) + if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_nsc))) { + rc = -ENODEV; goto err_rel_reg; + } dev_dbg(&pdev->dev, "NSC TPM detected\n"); dev_dbg(&pdev->dev, @@ -361,10 +364,12 @@ static int __init init_nsc(void) "NSC TPM revision %d\n", tpm_read_index(nscAddrBase, 0x27) & 0x1F); + chip->vendor.base = base; + return 0; err_rel_reg: - release_region(tpm_nsc.base, 2); + release_region(base, 2); err_unreg_dev: platform_device_unregister(pdev); err_free_dev: From 9e18ee19179a7742999d0e2d4bfcba75b5562439 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:37:38 -0700 Subject: [PATCH 046/160] [PATCH] tpm: command duration update With the TPM 1.2 Specification, each command is classified as short, medium or long and the chip tells you the maximum amount of time for a response to each class of command. This patch provides and array of the classifications and a function to determine how long the response should be waited for. Also, it uses that information in the command processing to determine how long to poll for. The function is exported so the 1.2 driver can use the functionality to determine how long to wait for a DataAvailable interrupt if interrupts are being used. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.c | 312 ++++++++++++++++++++++++++++++++++++++++- drivers/char/tpm/tpm.h | 2 + 2 files changed, 311 insertions(+), 3 deletions(-) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 5e58296f2832..e54bcb4e4e3e 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -35,10 +35,290 @@ enum tpm_const { TPM_NUM_MASK_ENTRIES = TPM_NUM_DEVICES / (8 * sizeof(int)) }; +enum tpm_duration { + TPM_SHORT = 0, + TPM_MEDIUM = 1, + TPM_LONG = 2, + TPM_UNDEFINED, +}; + +#define TPM_MAX_ORDINAL 243 +#define TPM_MAX_PROTECTED_ORDINAL 12 +#define TPM_PROTECTED_ORDINAL_MASK 0xFF + static LIST_HEAD(tpm_chip_list); static DEFINE_SPINLOCK(driver_lock); static int dev_mask[TPM_NUM_MASK_ENTRIES]; +/* + * Array with one entry per ordinal defining the maximum amount + * of time the chip could take to return the result. The ordinal + * designation of short, medium or long is defined in a table in + * TCG Specification TPM Main Part 2 TPM Structures Section 17. The + * values of the SHORT, MEDIUM, and LONG durations are retrieved + * from the chip during initialization with a call to tpm_get_timeouts. + */ +static const u8 tpm_protected_ordinal_duration[TPM_MAX_PROTECTED_ORDINAL] = { + TPM_UNDEFINED, /* 0 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 5 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 10 */ + TPM_SHORT, +}; + +static const u8 tpm_ordinal_duration[TPM_MAX_ORDINAL] = { + TPM_UNDEFINED, /* 0 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 5 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 10 */ + TPM_SHORT, + TPM_MEDIUM, + TPM_LONG, + TPM_LONG, + TPM_MEDIUM, /* 15 */ + TPM_SHORT, + TPM_SHORT, + TPM_MEDIUM, + TPM_LONG, + TPM_SHORT, /* 20 */ + TPM_SHORT, + TPM_MEDIUM, + TPM_MEDIUM, + TPM_MEDIUM, + TPM_SHORT, /* 25 */ + TPM_SHORT, + TPM_MEDIUM, + TPM_SHORT, + TPM_SHORT, + TPM_MEDIUM, /* 30 */ + TPM_LONG, + TPM_MEDIUM, + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, /* 35 */ + TPM_MEDIUM, + TPM_MEDIUM, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_MEDIUM, /* 40 */ + TPM_LONG, + TPM_MEDIUM, + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, /* 45 */ + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, + TPM_LONG, + TPM_MEDIUM, /* 50 */ + TPM_MEDIUM, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 55 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_MEDIUM, /* 60 */ + TPM_MEDIUM, + TPM_MEDIUM, + TPM_SHORT, + TPM_SHORT, + TPM_MEDIUM, /* 65 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 70 */ + TPM_SHORT, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 75 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_LONG, /* 80 */ + TPM_UNDEFINED, + TPM_MEDIUM, + TPM_LONG, + TPM_SHORT, + TPM_UNDEFINED, /* 85 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 90 */ + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, + TPM_UNDEFINED, /* 95 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_MEDIUM, /* 100 */ + TPM_SHORT, + TPM_SHORT, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 105 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 110 */ + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, /* 115 */ + TPM_SHORT, + TPM_SHORT, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_LONG, /* 120 */ + TPM_LONG, + TPM_MEDIUM, + TPM_UNDEFINED, + TPM_SHORT, + TPM_SHORT, /* 125 */ + TPM_SHORT, + TPM_LONG, + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, /* 130 */ + TPM_MEDIUM, + TPM_UNDEFINED, + TPM_SHORT, + TPM_MEDIUM, + TPM_UNDEFINED, /* 135 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 140 */ + TPM_SHORT, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 145 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 150 */ + TPM_MEDIUM, + TPM_MEDIUM, + TPM_SHORT, + TPM_SHORT, + TPM_UNDEFINED, /* 155 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 160 */ + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 165 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_LONG, /* 170 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 175 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_MEDIUM, /* 180 */ + TPM_SHORT, + TPM_MEDIUM, + TPM_MEDIUM, + TPM_MEDIUM, + TPM_MEDIUM, /* 185 */ + TPM_SHORT, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 190 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 195 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 200 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, + TPM_SHORT, /* 205 */ + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, + TPM_MEDIUM, /* 210 */ + TPM_UNDEFINED, + TPM_MEDIUM, + TPM_MEDIUM, + TPM_MEDIUM, + TPM_UNDEFINED, /* 215 */ + TPM_MEDIUM, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, + TPM_SHORT, /* 220 */ + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, + TPM_SHORT, + TPM_UNDEFINED, /* 225 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 230 */ + TPM_LONG, + TPM_MEDIUM, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, /* 235 */ + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_UNDEFINED, + TPM_SHORT, /* 240 */ + TPM_UNDEFINED, + TPM_MEDIUM, +}; + static void user_reader_timeout(unsigned long ptr) { struct tpm_chip *chip = (struct tpm_chip *) ptr; @@ -56,6 +336,32 @@ static void timeout_work(void *ptr) up(&chip->buffer_mutex); } +/* + * Returns max number of jiffies to wait + */ +unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, + u32 ordinal) +{ + int duration_idx = TPM_UNDEFINED; + int duration = 0; + + if (ordinal < TPM_MAX_ORDINAL) + duration_idx = tpm_ordinal_duration[ordinal]; + else if ((ordinal & TPM_PROTECTED_ORDINAL_MASK) < + TPM_MAX_PROTECTED_ORDINAL) + duration_idx = + tpm_protected_ordinal_duration[ordinal & + TPM_PROTECTED_ORDINAL_MASK]; + + if (duration_idx != TPM_UNDEFINED) + duration = chip->vendor.duration[duration_idx] * HZ / 1000; + if (duration <= 0) + return 2 * 60 * HZ; + else + return duration; +} +EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration); + /* * Internal kernel interface to transmit TPM commands */ @@ -63,11 +369,11 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, size_t bufsiz) { ssize_t rc; - u32 count; + u32 count, ordinal; unsigned long stop; count = be32_to_cpu(*((__be32 *) (buf + 2))); - + ordinal = be32_to_cpu(*((__be32 *) (buf + 6))); if (count == 0) return -ENODATA; if (count > bufsiz) { @@ -84,7 +390,7 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, goto out; } - stop = jiffies + 2 * 60 * HZ; + stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal); do { u8 status = chip->vendor.status(chip); if ((status & chip->vendor.req_complete_mask) == diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 4f005345bf37..1d28485b8fb3 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -63,6 +63,7 @@ struct tpm_vendor_specific { u8 (*status) (struct tpm_chip *); struct miscdevice miscdev; struct attribute_group *attr_group; + u32 duration[3]; }; struct tpm_chip { @@ -100,6 +101,7 @@ static inline void tpm_write_index(int base, int index, int value) outb(value & 0xFF, base+1); } +extern unsigned long tpm_calc_ordinal_duration(struct tpm_chip *, u32); extern struct tpm_chip* tpm_register_hardware(struct device *, const struct tpm_vendor_specific *); extern int tpm_open(struct inode *, struct file *); From 08e96e486dd1345ae0ad70247387d0d4fd346889 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:37:50 -0700 Subject: [PATCH 047/160] [PATCH] tpm: new 1.2 sysfs files Many of the sysfs files were calling the TPM_GetCapability command with array. Since for 1.2 more sysfs files of this type are coming I am generalizing the array so there can be one array and the unique parts can be filled in just before the command is called. This updated version of the patch breaks the multi-value sysfs file into separate files pointed out by Greg. It also addresses the code redundancy and ugliness in the tpm_show_* functions pointed out on another patch by Dave Hansen. Signed-off-by: Kylene Hall Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.c | 235 ++++++++++++++++++++++++++++++++++++++++- drivers/char/tpm/tpm.h | 14 +++ 2 files changed, 247 insertions(+), 2 deletions(-) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index e54bcb4e4e3e..24c4423d4851 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -430,17 +430,27 @@ out: #define TPM_GET_CAP_RET_UINT32_2_IDX 18 #define TPM_GET_CAP_RET_UINT32_3_IDX 22 #define TPM_GET_CAP_RET_UINT32_4_IDX 26 +#define TPM_GET_CAP_PERM_DISABLE_IDX 16 +#define TPM_GET_CAP_PERM_INACTIVE_IDX 18 +#define TPM_GET_CAP_RET_BOOL_1_IDX 14 +#define TPM_GET_CAP_TEMP_INACTIVE_IDX 16 #define TPM_CAP_IDX 13 #define TPM_CAP_SUBCAP_IDX 21 enum tpm_capabilities { + TPM_CAP_FLAG = 4, TPM_CAP_PROP = 5, }; enum tpm_sub_capabilities { TPM_CAP_PROP_PCR = 0x1, TPM_CAP_PROP_MANUFACTURER = 0x3, + TPM_CAP_FLAG_PERM = 0x8, + TPM_CAP_FLAG_VOL = 0x9, + TPM_CAP_PROP_OWNER = 0x11, + TPM_CAP_PROP_TIS_TIMEOUT = 0x15, + TPM_CAP_PROP_TIS_DURATION = 0x20, }; /* @@ -474,6 +484,180 @@ static ssize_t transmit_cmd(struct tpm_chip *chip, u8 *data, int len, return 0; } +void tpm_gen_interrupt(struct tpm_chip *chip) +{ + u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 30)]; + ssize_t rc; + + memcpy(data, tpm_cap, sizeof(tpm_cap)); + data[TPM_CAP_IDX] = TPM_CAP_PROP; + data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_TIMEOUT; + + rc = transmit_cmd(chip, data, sizeof(data), + "attempting to determine the timeouts"); +} +EXPORT_SYMBOL_GPL(tpm_gen_interrupt); + +void tpm_get_timeouts(struct tpm_chip *chip) +{ + u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 30)]; + ssize_t rc; + u32 timeout; + + memcpy(data, tpm_cap, sizeof(tpm_cap)); + data[TPM_CAP_IDX] = TPM_CAP_PROP; + data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_TIMEOUT; + + rc = transmit_cmd(chip, data, sizeof(data), + "attempting to determine the timeouts"); + if (rc) + goto duration; + + if (be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_SIZE_IDX))) + != 4 * sizeof(u32)) + goto duration; + + /* Don't overwrite default if value is 0 */ + timeout = + be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))); + if (timeout) + chip->vendor.timeout_a = timeout; + timeout = + be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_2_IDX))); + if (timeout) + chip->vendor.timeout_b = timeout; + timeout = + be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_3_IDX))); + if (timeout) + chip->vendor.timeout_c = timeout; + timeout = + be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_4_IDX))); + if (timeout) + chip->vendor.timeout_d = timeout; + +duration: + memcpy(data, tpm_cap, sizeof(tpm_cap)); + data[TPM_CAP_IDX] = TPM_CAP_PROP; + data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_DURATION; + + rc = transmit_cmd(chip, data, sizeof(data), + "attempting to determine the durations"); + if (rc) + return; + + if (be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_SIZE_IDX))) + != 3 * sizeof(u32)) + return; + + chip->vendor.duration[TPM_SHORT] = + be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))); + chip->vendor.duration[TPM_MEDIUM] = + be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_2_IDX))); + chip->vendor.duration[TPM_LONG] = + be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_3_IDX))); +} +EXPORT_SYMBOL_GPL(tpm_get_timeouts); + +void tpm_continue_selftest(struct tpm_chip *chip) +{ + u8 data[] = { + 0, 193, /* TPM_TAG_RQU_COMMAND */ + 0, 0, 0, 10, /* length */ + 0, 0, 0, 83, /* TPM_ORD_GetCapability */ + }; + + tpm_transmit(chip, data, sizeof(data)); +} +EXPORT_SYMBOL_GPL(tpm_continue_selftest); + +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, + char *buf) +{ + u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 35)]; + ssize_t rc; + + struct tpm_chip *chip = dev_get_drvdata(dev); + if (chip == NULL) + return -ENODEV; + + memcpy(data, tpm_cap, sizeof(tpm_cap)); + data[TPM_CAP_IDX] = TPM_CAP_FLAG; + data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM; + + rc = transmit_cmd(chip, data, sizeof(data), + "attemtping to determine the permanent state"); + if (rc) + return 0; + return sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_DISABLE_IDX]); +} +EXPORT_SYMBOL_GPL(tpm_show_enabled); + +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, + char *buf) +{ + u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 35)]; + ssize_t rc; + + struct tpm_chip *chip = dev_get_drvdata(dev); + if (chip == NULL) + return -ENODEV; + + memcpy(data, tpm_cap, sizeof(tpm_cap)); + data[TPM_CAP_IDX] = TPM_CAP_FLAG; + data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM; + + rc = transmit_cmd(chip, data, sizeof(data), + "attemtping to determine the permanent state"); + if (rc) + return 0; + return sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_INACTIVE_IDX]); +} +EXPORT_SYMBOL_GPL(tpm_show_active); + +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, + char *buf) +{ + u8 data[sizeof(tpm_cap)]; + ssize_t rc; + + struct tpm_chip *chip = dev_get_drvdata(dev); + if (chip == NULL) + return -ENODEV; + + memcpy(data, tpm_cap, sizeof(tpm_cap)); + data[TPM_CAP_IDX] = TPM_CAP_PROP; + data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_OWNER; + + rc = transmit_cmd(chip, data, sizeof(data), + "attempting to determine the owner state"); + if (rc) + return 0; + return sprintf(buf, "%d\n", data[TPM_GET_CAP_RET_BOOL_1_IDX]); +} +EXPORT_SYMBOL_GPL(tpm_show_owned); + +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) +{ + u8 data[sizeof(tpm_cap)]; + ssize_t rc; + + struct tpm_chip *chip = dev_get_drvdata(dev); + if (chip == NULL) + return -ENODEV; + + memcpy(data, tpm_cap, sizeof(tpm_cap)); + data[TPM_CAP_IDX] = TPM_CAP_FLAG; + data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_VOL; + + rc = transmit_cmd(chip, data, sizeof(data), + "attempting to determine the temporary state"); + if (rc) + return 0; + return sprintf(buf, "%d\n", data[TPM_GET_CAP_TEMP_INACTIVE_IDX]); +} +EXPORT_SYMBOL_GPL(tpm_show_temp_deactivated); + static const u8 pcrread[] = { 0, 193, /* TPM_TAG_RQU_COMMAND */ 0, 0, 0, 14, /* length */ @@ -484,7 +668,7 @@ static const u8 pcrread[] = { ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr, char *buf) { - u8 data[30]; + u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(pcrread)), 30)]; ssize_t rc; int i, j, num_pcrs; __be32 index; @@ -588,6 +772,7 @@ out: EXPORT_SYMBOL_GPL(tpm_show_pubek); #define CAP_VERSION_1_1 6 +#define CAP_VERSION_1_2 0x1A #define CAP_VERSION_IDX 13 static const u8 cap_version[] = { 0, 193, /* TPM_TAG_RQU_COMMAND */ @@ -600,7 +785,7 @@ static const u8 cap_version[] = { ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr, char *buf) { - u8 data[30]; + u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(cap_version)), 30)]; ssize_t rc; char *str = buf; @@ -637,6 +822,52 @@ out: } EXPORT_SYMBOL_GPL(tpm_show_caps); +ssize_t tpm_show_caps_1_2(struct device * dev, + struct device_attribute * attr, char *buf) +{ + u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(cap_version)), 30)]; + ssize_t len; + char *str = buf; + + struct tpm_chip *chip = dev_get_drvdata(dev); + if (chip == NULL) + return -ENODEV; + + memcpy(data, tpm_cap, sizeof(tpm_cap)); + data[TPM_CAP_IDX] = TPM_CAP_PROP; + data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER; + + if ((len = tpm_transmit(chip, data, sizeof(data))) <= + TPM_ERROR_SIZE) { + dev_dbg(chip->dev, "A TPM error (%d) occurred " + "attempting to determine the manufacturer\n", + be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX)))); + return 0; + } + + str += sprintf(str, "Manufacturer: 0x%x\n", + be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX)))); + + memcpy(data, cap_version, sizeof(cap_version)); + data[CAP_VERSION_IDX] = CAP_VERSION_1_2; + + if ((len = tpm_transmit(chip, data, sizeof(data))) <= + TPM_ERROR_SIZE) { + dev_err(chip->dev, "A TPM error (%d) occurred " + "attempting to determine the 1.2 version\n", + be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX)))); + goto out; + } + str += sprintf(str, + "TCG version: %d.%d\nFirmware version: %d.%d\n", + (int) data[16], (int) data[17], (int) data[18], + (int) data[19]); + +out: + return str - buf; +} +EXPORT_SYMBOL_GPL(tpm_show_caps_1_2); + ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 1d28485b8fb3..75d105c4e65d 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -42,8 +42,18 @@ extern ssize_t tpm_show_pcrs(struct device *, struct device_attribute *attr, char *); extern ssize_t tpm_show_caps(struct device *, struct device_attribute *attr, char *); +extern ssize_t tpm_show_caps_1_2(struct device *, struct device_attribute *attr, + char *); extern ssize_t tpm_store_cancel(struct device *, struct device_attribute *attr, const char *, size_t); +extern ssize_t tpm_show_enabled(struct device *, struct device_attribute *attr, + char *); +extern ssize_t tpm_show_active(struct device *, struct device_attribute *attr, + char *); +extern ssize_t tpm_show_owned(struct device *, struct device_attribute *attr, + char *); +extern ssize_t tpm_show_temp_deactivated(struct device *, + struct device_attribute *attr, char *); struct tpm_chip; @@ -63,6 +73,7 @@ struct tpm_vendor_specific { u8 (*status) (struct tpm_chip *); struct miscdevice miscdev; struct attribute_group *attr_group; + u32 timeout_a, timeout_b, timeout_c, timeout_d; u32 duration[3]; }; @@ -101,6 +112,9 @@ static inline void tpm_write_index(int base, int index, int value) outb(value & 0xFF, base+1); } +extern void tpm_get_timeouts(struct tpm_chip *); +extern void tpm_gen_interrupt(struct tpm_chip *); +extern void tpm_continue_selftest(struct tpm_chip *); extern unsigned long tpm_calc_ordinal_duration(struct tpm_chip *, u32); extern struct tpm_chip* tpm_register_hardware(struct device *, const struct tpm_vendor_specific *); From 27084efee0c3dc0eb15b5ed750aa9f1adb3983c3 Mon Sep 17 00:00:00 2001 From: Leendert van Doorn Date: Sat, 22 Apr 2006 02:38:03 -0700 Subject: [PATCH 048/160] [PATCH] tpm: driver for next generation TPM chips The driver for the next generation of TPM chips version 1.2 including support for interrupts. The Trusted Computing Group has written the TPM Interface Specification (TIS) which defines a common interface for all manufacturer's 1.2 TPM's thus the name tpm_tis. Signed-off-by: Leendert van Doorn Signed-off-by: Kylene Hall Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/Kconfig | 11 +- drivers/char/tpm/Makefile | 1 + drivers/char/tpm/tpm.c | 3 + drivers/char/tpm/tpm.h | 9 + drivers/char/tpm/tpm_tis.c | 647 +++++++++++++++++++++++++++++++++++++ 5 files changed, 670 insertions(+), 1 deletion(-) create mode 100644 drivers/char/tpm/tpm_tis.c diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index a6873bf89ffa..1efde3b27619 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -20,9 +20,18 @@ config TCG_TPM Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI and CONFIG_PNPACPI. +config TCG_TIS + tristate "TPM Interface Specification 1.2 Interface" + depends on TCG_TPM + ---help--- + If you have a TPM security chip that is compliant with the + TCG TIS 1.2 TPM specification say Yes and it will be accessible + from within Linux. To compile this driver as a module, choose + M here; the module will be called tpm_tis. + config TCG_NSC tristate "National Semiconductor TPM Interface" - depends on TCG_TPM + depends on TCG_TPM && PNPACPI ---help--- If you have a TPM security chip from National Semicondutor say Yes and it will be accessible from within Linux. To diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile index ba4582d160fd..ea3a1e02a824 100644 --- a/drivers/char/tpm/Makefile +++ b/drivers/char/tpm/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_TCG_TPM) += tpm.o ifdef CONFIG_ACPI obj-$(CONFIG_TCG_TPM) += tpm_bios.o endif +obj-$(CONFIG_TCG_TIS) += tpm_tis.o obj-$(CONFIG_TCG_NSC) += tpm_nsc.o obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 24c4423d4851..150c86af7809 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -390,6 +390,9 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, goto out; } + if (chip->vendor.irq) + goto out_recv; + stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal); do { u8 status = chip->vendor.status(chip); diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 75d105c4e65d..24541a556d02 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -64,6 +64,8 @@ struct tpm_vendor_specific { void __iomem *iobase; /* ioremapped address */ unsigned long base; /* TPM base address */ + int irq; + int region_size; int have_region; @@ -73,8 +75,13 @@ struct tpm_vendor_specific { u8 (*status) (struct tpm_chip *); struct miscdevice miscdev; struct attribute_group *attr_group; + struct list_head list; + int locality; u32 timeout_a, timeout_b, timeout_c, timeout_d; u32 duration[3]; + + wait_queue_head_t read_queue; + wait_queue_head_t int_queue; }; struct tpm_chip { @@ -100,6 +107,8 @@ struct tpm_chip { struct list_head list; }; +#define to_tpm_chip(n) container_of(n, struct tpm_chip, vendor) + static inline int tpm_read_index(int base, int index) { outb(index, base); diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c new file mode 100644 index 000000000000..02759307f736 --- /dev/null +++ b/drivers/char/tpm/tpm_tis.c @@ -0,0 +1,647 @@ +/* + * Copyright (C) 2005, 2006 IBM Corporation + * + * Authors: + * Leendert van Doorn + * Kylene Hall + * + * Device driver for TCG/TCPA TPM (trusted platform module). + * Specifications at www.trustedcomputinggroup.org + * + * This device driver implements the TPM interface as defined in + * the TCG TPM Interface Spec version 1.2, revision 1.0. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2 of the + * License. + */ +#include +#include +#include +#include "tpm.h" + +#define TPM_HEADER_SIZE 10 + +enum tis_access { + TPM_ACCESS_VALID = 0x80, + TPM_ACCESS_ACTIVE_LOCALITY = 0x20, + TPM_ACCESS_REQUEST_PENDING = 0x04, + TPM_ACCESS_REQUEST_USE = 0x02, +}; + +enum tis_status { + TPM_STS_VALID = 0x80, + TPM_STS_COMMAND_READY = 0x40, + TPM_STS_GO = 0x20, + TPM_STS_DATA_AVAIL = 0x10, + TPM_STS_DATA_EXPECT = 0x08, +}; + +enum tis_int_flags { + TPM_GLOBAL_INT_ENABLE = 0x80000000, + TPM_INTF_BURST_COUNT_STATIC = 0x100, + TPM_INTF_CMD_READY_INT = 0x080, + TPM_INTF_INT_EDGE_FALLING = 0x040, + TPM_INTF_INT_EDGE_RISING = 0x020, + TPM_INTF_INT_LEVEL_LOW = 0x010, + TPM_INTF_INT_LEVEL_HIGH = 0x008, + TPM_INTF_LOCALITY_CHANGE_INT = 0x004, + TPM_INTF_STS_VALID_INT = 0x002, + TPM_INTF_DATA_AVAIL_INT = 0x001, +}; + +#define TPM_ACCESS(l) (0x0000 | ((l) << 12)) +#define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12)) +#define TPM_INT_VECTOR(l) (0x000C | ((l) << 12)) +#define TPM_INT_STATUS(l) (0x0010 | ((l) << 12)) +#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12)) +#define TPM_STS(l) (0x0018 | ((l) << 12)) +#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12)) + +#define TPM_DID_VID(l) (0x0F00 | ((l) << 12)) +#define TPM_RID(l) (0x0F04 | ((l) << 12)) + +static LIST_HEAD(tis_chips); +static DEFINE_SPINLOCK(tis_lock); + +static int check_locality(struct tpm_chip *chip, int l) +{ + if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) & + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) + return chip->vendor.locality = l; + + return -1; +} + +static void release_locality(struct tpm_chip *chip, int l, int force) +{ + if (force || (ioread8(chip->vendor.iobase + TPM_ACCESS(l)) & + (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) == + (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) + iowrite8(TPM_ACCESS_ACTIVE_LOCALITY, + chip->vendor.iobase + TPM_ACCESS(l)); +} + +static int request_locality(struct tpm_chip *chip, int l) +{ + unsigned long stop; + long rc; + + if (check_locality(chip, l) >= 0) + return l; + + iowrite8(TPM_ACCESS_REQUEST_USE, + chip->vendor.iobase + TPM_ACCESS(l)); + + if (chip->vendor.irq) { + rc = wait_event_interruptible_timeout(chip->vendor. + int_queue, + (check_locality + (chip, l) >= 0), + msecs_to_jiffies + (chip->vendor. + timeout_a)); + if (rc > 0) + return l; + + } else { + /* wait for burstcount */ + stop = jiffies + (HZ * chip->vendor.timeout_a / 1000); + do { + if (check_locality(chip, l) >= 0) + return l; + msleep(TPM_TIMEOUT); + } + while (time_before(jiffies, stop)); + } + return -1; +} + +static u8 tpm_tis_status(struct tpm_chip *chip) +{ + return ioread8(chip->vendor.iobase + + TPM_STS(chip->vendor.locality)); +} + +static void tpm_tis_ready(struct tpm_chip *chip) +{ + /* this causes the current command to be aborted */ + iowrite8(TPM_STS_COMMAND_READY, + chip->vendor.iobase + TPM_STS(chip->vendor.locality)); +} + +static int get_burstcount(struct tpm_chip *chip) +{ + unsigned long stop; + int burstcnt; + + /* wait for burstcount */ + /* which timeout value, spec has 2 answers (c & d) */ + stop = jiffies + (HZ * chip->vendor.timeout_d / 1000); + do { + burstcnt = ioread8(chip->vendor.iobase + + TPM_STS(chip->vendor.locality) + 1); + burstcnt += ioread8(chip->vendor.iobase + + TPM_STS(chip->vendor.locality) + + 2) << 8; + if (burstcnt) + return burstcnt; + msleep(TPM_TIMEOUT); + } while (time_before(jiffies, stop)); + return -EBUSY; +} + +static int wait_for_stat(struct tpm_chip *chip, u8 mask, u32 timeout, + wait_queue_head_t *queue) +{ + unsigned long stop; + long rc; + u8 status; + + /* check current status */ + status = tpm_tis_status(chip); + if ((status & mask) == mask) + return 0; + + if (chip->vendor.irq) { + rc = wait_event_interruptible_timeout(*queue, + ((tpm_tis_status + (chip) & mask) == + mask), + msecs_to_jiffies + (timeout)); + if (rc > 0) + return 0; + } else { + stop = jiffies + (HZ * timeout / 1000); + do { + msleep(TPM_TIMEOUT); + status = tpm_tis_status(chip); + if ((status & mask) == mask) + return 0; + } while (time_before(jiffies, stop)); + } + return -ETIME; +} + +static int recv_data(struct tpm_chip *chip, u8 * buf, size_t count) +{ + int size = 0, burstcnt; + while (size < count && + wait_for_stat(chip, + TPM_STS_DATA_AVAIL | TPM_STS_VALID, + chip->vendor.timeout_c, + &chip->vendor.read_queue) + == 0) { + burstcnt = get_burstcount(chip); + for (; burstcnt > 0 && size < count; burstcnt--) + buf[size++] = ioread8(chip->vendor.iobase + + TPM_DATA_FIFO(chip->vendor. + locality)); + } + return size; +} + +static int tpm_tis_recv(struct tpm_chip *chip, u8 * buf, size_t count) +{ + int size = 0; + int expected, status; + + if (count < TPM_HEADER_SIZE) { + size = -EIO; + goto out; + } + + /* read first 10 bytes, including tag, paramsize, and result */ + if ((size = + recv_data(chip, buf, TPM_HEADER_SIZE)) < TPM_HEADER_SIZE) { + dev_err(chip->dev, "Unable to read header\n"); + goto out; + } + + expected = be32_to_cpu(*(__be32 *) (buf + 2)); + if (expected > count) { + size = -EIO; + goto out; + } + + if ((size += + recv_data(chip, &buf[TPM_HEADER_SIZE], + expected - TPM_HEADER_SIZE)) < expected) { + dev_err(chip->dev, "Unable to read remainder of result\n"); + size = -ETIME; + goto out; + } + + wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, + &chip->vendor.int_queue); + status = tpm_tis_status(chip); + if (status & TPM_STS_DATA_AVAIL) { /* retry? */ + dev_err(chip->dev, "Error left over data\n"); + size = -EIO; + goto out; + } + +out: + tpm_tis_ready(chip); + release_locality(chip, chip->vendor.locality, 0); + return size; +} + +/* + * If interrupts are used (signaled by an irq set in the vendor structure) + * tpm.c can skip polling for the data to be available as the interrupt is + * waited for here + */ +static int tpm_tis_send(struct tpm_chip *chip, u8 * buf, size_t len) +{ + int rc, status, burstcnt; + size_t count = 0; + u32 ordinal; + + if (request_locality(chip, 0) < 0) + return -EBUSY; + + status = tpm_tis_status(chip); + if ((status & TPM_STS_COMMAND_READY) == 0) { + tpm_tis_ready(chip); + if (wait_for_stat + (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b, + &chip->vendor.int_queue) < 0) { + rc = -ETIME; + goto out_err; + } + } + + while (count < len - 1) { + burstcnt = get_burstcount(chip); + for (; burstcnt > 0 && count < len - 1; burstcnt--) { + iowrite8(buf[count], chip->vendor.iobase + + TPM_DATA_FIFO(chip->vendor.locality)); + count++; + } + + wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, + &chip->vendor.int_queue); + status = tpm_tis_status(chip); + if ((status & TPM_STS_DATA_EXPECT) == 0) { + rc = -EIO; + goto out_err; + } + } + + /* write last byte */ + iowrite8(buf[count], + chip->vendor.iobase + + TPM_DATA_FIFO(chip->vendor.locality)); + wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, + &chip->vendor.int_queue); + status = tpm_tis_status(chip); + if ((status & TPM_STS_DATA_EXPECT) != 0) { + rc = -EIO; + goto out_err; + } + + /* go and do it */ + iowrite8(TPM_STS_GO, + chip->vendor.iobase + TPM_STS(chip->vendor.locality)); + + if (chip->vendor.irq) { + ordinal = be32_to_cpu(*((__be32 *) (buf + 6))); + if (wait_for_stat + (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, + tpm_calc_ordinal_duration(chip, ordinal), + &chip->vendor.read_queue) < 0) { + rc = -ETIME; + goto out_err; + } + } + return len; +out_err: + tpm_tis_ready(chip); + release_locality(chip, chip->vendor.locality, 0); + return rc; +} + +static struct file_operations tis_ops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .open = tpm_open, + .read = tpm_read, + .write = tpm_write, + .release = tpm_release, +}; + +static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); +static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL); +static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL); +static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL); +static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL); +static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated, + NULL); +static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL); +static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel); + +static struct attribute *tis_attrs[] = { + &dev_attr_pubek.attr, + &dev_attr_pcrs.attr, + &dev_attr_enabled.attr, + &dev_attr_active.attr, + &dev_attr_owned.attr, + &dev_attr_temp_deactivated.attr, + &dev_attr_caps.attr, + &dev_attr_cancel.attr, NULL, +}; + +static struct attribute_group tis_attr_grp = { + .attrs = tis_attrs +}; + +static struct tpm_vendor_specific tpm_tis = { + .status = tpm_tis_status, + .recv = tpm_tis_recv, + .send = tpm_tis_send, + .cancel = tpm_tis_ready, + .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID, + .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID, + .req_canceled = TPM_STS_COMMAND_READY, + .attr_group = &tis_attr_grp, + .miscdev = { + .fops = &tis_ops,}, +}; + +static irqreturn_t tis_int_probe(int irq, void *dev_id, struct pt_regs + *regs) +{ + struct tpm_chip *chip = (struct tpm_chip *) dev_id; + u32 interrupt; + + interrupt = ioread32(chip->vendor.iobase + + TPM_INT_STATUS(chip->vendor.locality)); + + if (interrupt == 0) + return IRQ_NONE; + + chip->vendor.irq = irq; + + /* Clear interrupts handled with TPM_EOI */ + iowrite32(interrupt, + chip->vendor.iobase + + TPM_INT_STATUS(chip->vendor.locality)); + return IRQ_HANDLED; +} + +static irqreturn_t tis_int_handler(int irq, void *dev_id, struct pt_regs + *regs) +{ + struct tpm_chip *chip = (struct tpm_chip *) dev_id; + u32 interrupt; + int i; + + interrupt = ioread32(chip->vendor.iobase + + TPM_INT_STATUS(chip->vendor.locality)); + + if (interrupt == 0) + return IRQ_NONE; + + if (interrupt & TPM_INTF_DATA_AVAIL_INT) + wake_up_interruptible(&chip->vendor.read_queue); + if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT) + for (i = 0; i < 5; i++) + if (check_locality(chip, i) >= 0) + break; + if (interrupt & + (TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT | + TPM_INTF_CMD_READY_INT)) + wake_up_interruptible(&chip->vendor.int_queue); + + /* Clear interrupts handled with TPM_EOI */ + iowrite32(interrupt, + chip->vendor.iobase + + TPM_INT_STATUS(chip->vendor.locality)); + return IRQ_HANDLED; +} + +static int __devinit tpm_tis_pnp_init(struct pnp_dev + *pnp_dev, const struct + pnp_device_id + *pnp_id) +{ + u32 vendor, intfcaps, intmask; + int rc, i; + unsigned long start, len; + struct tpm_chip *chip; + + start = pnp_mem_start(pnp_dev, 0); + len = pnp_mem_len(pnp_dev, 0); + + if (!(chip = tpm_register_hardware(&pnp_dev->dev, &tpm_tis))) + return -ENODEV; + + chip->vendor.iobase = ioremap(start, len); + if (!chip->vendor.iobase) { + rc = -EIO; + goto out_err; + } + + vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0)); + if ((vendor & 0xFFFF) == 0xFFFF) { + rc = -ENODEV; + goto out_err; + } + + /* Default timeouts */ + chip->vendor.timeout_a = 750; /* ms */ + chip->vendor.timeout_b = 2000; /* 2 sec */ + chip->vendor.timeout_c = 750; /* ms */ + chip->vendor.timeout_d = 750; /* ms */ + + dev_info(&pnp_dev->dev, + "1.2 TPM (device-id 0x%X, rev-id %d)\n", + vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0))); + + /* Figure out the capabilities */ + intfcaps = + ioread32(chip->vendor.iobase + + TPM_INTF_CAPS(chip->vendor.locality)); + dev_dbg(&pnp_dev->dev, "TPM interface capabilities (0x%x):\n", + intfcaps); + if (intfcaps & TPM_INTF_BURST_COUNT_STATIC) + dev_dbg(&pnp_dev->dev, "\tBurst Count Static\n"); + if (intfcaps & TPM_INTF_CMD_READY_INT) + dev_dbg(&pnp_dev->dev, "\tCommand Ready Int Support\n"); + if (intfcaps & TPM_INTF_INT_EDGE_FALLING) + dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Falling\n"); + if (intfcaps & TPM_INTF_INT_EDGE_RISING) + dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Rising\n"); + if (intfcaps & TPM_INTF_INT_LEVEL_LOW) + dev_dbg(&pnp_dev->dev, "\tInterrupt Level Low\n"); + if (intfcaps & TPM_INTF_INT_LEVEL_HIGH) + dev_dbg(&pnp_dev->dev, "\tInterrupt Level High\n"); + if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT) + dev_dbg(&pnp_dev->dev, "\tLocality Change Int Support\n"); + if (intfcaps & TPM_INTF_STS_VALID_INT) + dev_dbg(&pnp_dev->dev, "\tSts Valid Int Support\n"); + if (intfcaps & TPM_INTF_DATA_AVAIL_INT) + dev_dbg(&pnp_dev->dev, "\tData Avail Int Support\n"); + + if (request_locality(chip, 0) != 0) { + rc = -ENODEV; + goto out_err; + } + + /* INTERRUPT Setup */ + init_waitqueue_head(&chip->vendor.read_queue); + init_waitqueue_head(&chip->vendor.int_queue); + + intmask = + ioread32(chip->vendor.iobase + + TPM_INT_ENABLE(chip->vendor.locality)); + + intmask |= TPM_INTF_CMD_READY_INT + | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT + | TPM_INTF_STS_VALID_INT; + + iowrite32(intmask, + chip->vendor.iobase + + TPM_INT_ENABLE(chip->vendor.locality)); + + chip->vendor.irq = + ioread8(chip->vendor.iobase + + TPM_INT_VECTOR(chip->vendor.locality)); + + for (i = 3; i < 16 && chip->vendor.irq == 0; i++) { + iowrite8(i, + chip->vendor.iobase + + TPM_INT_VECTOR(chip->vendor.locality)); + if (request_irq + (i, tis_int_probe, SA_SHIRQ, + chip->vendor.miscdev.name, chip) != 0) { + dev_info(chip->dev, + "Unable to request irq: %d for probe\n", + i); + continue; + } + + /* Clear all existing */ + iowrite32(ioread32 + (chip->vendor.iobase + + TPM_INT_STATUS(chip->vendor.locality)), + chip->vendor.iobase + + TPM_INT_STATUS(chip->vendor.locality)); + + /* Turn on */ + iowrite32(intmask | TPM_GLOBAL_INT_ENABLE, + chip->vendor.iobase + + TPM_INT_ENABLE(chip->vendor.locality)); + + /* Generate Interrupts */ + tpm_gen_interrupt(chip); + + /* Turn off */ + iowrite32(intmask, + chip->vendor.iobase + + TPM_INT_ENABLE(chip->vendor.locality)); + free_irq(i, chip); + } + if (chip->vendor.irq) { + iowrite8(chip->vendor.irq, + chip->vendor.iobase + + TPM_INT_VECTOR(chip->vendor.locality)); + if (request_irq + (chip->vendor.irq, tis_int_handler, SA_SHIRQ, + chip->vendor.miscdev.name, chip) != 0) { + dev_info(chip->dev, + "Unable to request irq: %d for use\n", i); + chip->vendor.irq = 0; + } else { + /* Clear all existing */ + iowrite32(ioread32 + (chip->vendor.iobase + + TPM_INT_STATUS(chip->vendor.locality)), + chip->vendor.iobase + + TPM_INT_STATUS(chip->vendor.locality)); + + /* Turn on */ + iowrite32(intmask | TPM_GLOBAL_INT_ENABLE, + chip->vendor.iobase + + TPM_INT_ENABLE(chip->vendor.locality)); + } + } + + INIT_LIST_HEAD(&chip->vendor.list); + spin_lock(&tis_lock); + list_add(&chip->vendor.list, &tis_chips); + spin_unlock(&tis_lock); + + tpm_get_timeouts(chip); + tpm_continue_selftest(chip); + + return 0; +out_err: + if (chip->vendor.iobase) + iounmap(chip->vendor.iobase); + tpm_remove_hardware(chip->dev); + return rc; +} + +static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg) +{ + return tpm_pm_suspend(&dev->dev, msg); +} + +static int tpm_tis_pnp_resume(struct pnp_dev *dev) +{ + return tpm_pm_resume(&dev->dev); +} + +static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = { + {"PNP0C31", 0}, /* TPM */ + {"", 0} +}; + +static struct pnp_driver tis_pnp_driver = { + .name = "tpm_tis", + .id_table = tpm_pnp_tbl, + .probe = tpm_tis_pnp_init, + .suspend = tpm_tis_pnp_suspend, + .resume = tpm_tis_pnp_resume, +}; + +static int __init init_tis(void) +{ + return pnp_register_driver(&tis_pnp_driver); +} + +static void __exit cleanup_tis(void) +{ + struct tpm_vendor_specific *i, *j; + struct tpm_chip *chip; + spin_lock(&tis_lock); + list_for_each_entry_safe(i, j, &tis_chips, list) { + chip = to_tpm_chip(i); + iowrite32(~TPM_GLOBAL_INT_ENABLE & + ioread32(chip->vendor.iobase + + TPM_INT_ENABLE(chip->vendor. + locality)), + chip->vendor.iobase + + TPM_INT_ENABLE(chip->vendor.locality)); + release_locality(chip, chip->vendor.locality, 1); + if (chip->vendor.irq) + free_irq(chip->vendor.irq, chip); + iounmap(i->iobase); + list_del(&i->list); + tpm_remove_hardware(chip->dev); + } + spin_unlock(&tis_lock); + pnp_unregister_driver(&tis_pnp_driver); +} + +module_init(init_tis); +module_exit(cleanup_tis); +MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)"); +MODULE_DESCRIPTION("TPM Driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); From 36b20020e537036c4f9eb5b69140c88ead5da7dc Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:38:19 -0700 Subject: [PATCH 049/160] [PATCH] tpm: msecs_to_jiffies cleanups The timeout and duration values used in the tpm driver are not exposed to userspace. This patch converts the storage units to jiffies with msecs_to_jiffies. They were always being used in jiffies so this simplifies things removing the need for calculation all over the place. The change necessitated a type change in the tpm_chip struct to hold jiffies. Signed-off-by: Kylie Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.c | 22 ++++++++++++++-------- drivers/char/tpm/tpm.h | 4 ++-- drivers/char/tpm/tpm_tis.c | 32 ++++++++++++++++---------------- 3 files changed, 32 insertions(+), 26 deletions(-) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 150c86af7809..160dc080d580 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -354,7 +354,7 @@ unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, TPM_PROTECTED_ORDINAL_MASK]; if (duration_idx != TPM_UNDEFINED) - duration = chip->vendor.duration[duration_idx] * HZ / 1000; + duration = chip->vendor.duration[duration_idx]; if (duration <= 0) return 2 * 60 * HZ; else @@ -524,19 +524,19 @@ void tpm_get_timeouts(struct tpm_chip *chip) timeout = be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))); if (timeout) - chip->vendor.timeout_a = timeout; + chip->vendor.timeout_a = msecs_to_jiffies(timeout); timeout = be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_2_IDX))); if (timeout) - chip->vendor.timeout_b = timeout; + chip->vendor.timeout_b = msecs_to_jiffies(timeout); timeout = be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_3_IDX))); if (timeout) - chip->vendor.timeout_c = timeout; + chip->vendor.timeout_c = msecs_to_jiffies(timeout); timeout = be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_4_IDX))); if (timeout) - chip->vendor.timeout_d = timeout; + chip->vendor.timeout_d = msecs_to_jiffies(timeout); duration: memcpy(data, tpm_cap, sizeof(tpm_cap)); @@ -553,11 +553,17 @@ duration: return; chip->vendor.duration[TPM_SHORT] = - be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))); + msecs_to_jiffies(be32_to_cpu + (*((__be32 *) (data + + TPM_GET_CAP_RET_UINT32_1_IDX)))); chip->vendor.duration[TPM_MEDIUM] = - be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_2_IDX))); + msecs_to_jiffies(be32_to_cpu + (*((__be32 *) (data + + TPM_GET_CAP_RET_UINT32_2_IDX)))); chip->vendor.duration[TPM_LONG] = - be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_3_IDX))); + msecs_to_jiffies(be32_to_cpu + (*((__be32 *) (data + + TPM_GET_CAP_RET_UINT32_3_IDX)))); } EXPORT_SYMBOL_GPL(tpm_get_timeouts); diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 24541a556d02..54a4c804e25f 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -77,8 +77,8 @@ struct tpm_vendor_specific { struct attribute_group *attr_group; struct list_head list; int locality; - u32 timeout_a, timeout_b, timeout_c, timeout_d; - u32 duration[3]; + unsigned long timeout_a, timeout_b, timeout_c, timeout_d; /* jiffies */ + unsigned long duration[3]; /* jiffies */ wait_queue_head_t read_queue; wait_queue_head_t int_queue; diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 02759307f736..1cb5a7f0755d 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -51,6 +51,11 @@ enum tis_int_flags { TPM_INTF_DATA_AVAIL_INT = 0x001, }; +enum tis_defaults { + TIS_SHORT_TIMEOUT = 750, /* ms */ + TIS_LONG_TIMEOUT = 2000, /* 2 sec */ +}; + #define TPM_ACCESS(l) (0x0000 | ((l) << 12)) #define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12)) #define TPM_INT_VECTOR(l) (0x000C | ((l) << 12)) @@ -96,19 +101,16 @@ static int request_locality(struct tpm_chip *chip, int l) chip->vendor.iobase + TPM_ACCESS(l)); if (chip->vendor.irq) { - rc = wait_event_interruptible_timeout(chip->vendor. - int_queue, + rc = wait_event_interruptible_timeout(chip->vendor.int_queue, (check_locality (chip, l) >= 0), - msecs_to_jiffies - (chip->vendor. - timeout_a)); + chip->vendor.timeout_a); if (rc > 0) return l; } else { /* wait for burstcount */ - stop = jiffies + (HZ * chip->vendor.timeout_a / 1000); + stop = jiffies + chip->vendor.timeout_a; do { if (check_locality(chip, l) >= 0) return l; @@ -139,7 +141,7 @@ static int get_burstcount(struct tpm_chip *chip) /* wait for burstcount */ /* which timeout value, spec has 2 answers (c & d) */ - stop = jiffies + (HZ * chip->vendor.timeout_d / 1000); + stop = jiffies + chip->vendor.timeout_d; do { burstcnt = ioread8(chip->vendor.iobase + TPM_STS(chip->vendor.locality) + 1); @@ -153,7 +155,7 @@ static int get_burstcount(struct tpm_chip *chip) return -EBUSY; } -static int wait_for_stat(struct tpm_chip *chip, u8 mask, u32 timeout, +static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, wait_queue_head_t *queue) { unsigned long stop; @@ -169,13 +171,11 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, u32 timeout, rc = wait_event_interruptible_timeout(*queue, ((tpm_tis_status (chip) & mask) == - mask), - msecs_to_jiffies - (timeout)); + mask), timeout); if (rc > 0) return 0; } else { - stop = jiffies + (HZ * timeout / 1000); + stop = jiffies + timeout; do { msleep(TPM_TIMEOUT); status = tpm_tis_status(chip); @@ -453,10 +453,10 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev } /* Default timeouts */ - chip->vendor.timeout_a = 750; /* ms */ - chip->vendor.timeout_b = 2000; /* 2 sec */ - chip->vendor.timeout_c = 750; /* ms */ - chip->vendor.timeout_d = 750; /* ms */ + chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT); + chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT); + chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT); + chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT); dev_info(&pnp_dev->dev, "1.2 TPM (device-id 0x%X, rev-id %d)\n", From 10685a95301d02fde2b10f6047e405c69d2af82a Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:38:32 -0700 Subject: [PATCH 050/160] [PATCH] tpm: use clear_bit Use set_bit() and clear_bit() for dev_mask manipulation. Signed-off-by: Kylie Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm.c | 25 +++++++------------------ 1 file changed, 7 insertions(+), 18 deletions(-) diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 160dc080d580..6889e7db3aff 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -32,7 +32,6 @@ enum tpm_const { TPM_MINOR = 224, /* officially assigned */ TPM_BUFSIZE = 2048, TPM_NUM_DEVICES = 256, - TPM_NUM_MASK_ENTRIES = TPM_NUM_DEVICES / (8 * sizeof(int)) }; enum tpm_duration { @@ -48,7 +47,7 @@ enum tpm_duration { static LIST_HEAD(tpm_chip_list); static DEFINE_SPINLOCK(driver_lock); -static int dev_mask[TPM_NUM_MASK_ENTRIES]; +static DECLARE_BITMAP(dev_mask, TPM_NUM_DEVICES); /* * Array with one entry per ordinal defining the maximum amount @@ -1038,8 +1037,7 @@ void tpm_remove_hardware(struct device *dev) sysfs_remove_group(&dev->kobj, chip->vendor.attr_group); tpm_bios_log_teardown(chip->bios_dir); - dev_mask[chip->dev_num / TPM_NUM_MASK_ENTRIES] &= - ~(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES)); + clear_bit(chip->dev_num, dev_mask); kfree(chip); @@ -1097,7 +1095,6 @@ struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vend char *devname; struct tpm_chip *chip; - int i, j; /* Driver specific per-device data */ chip = kzalloc(sizeof(*chip), GFP_KERNEL); @@ -1116,19 +1113,9 @@ struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vend memcpy(&chip->vendor, entry, sizeof(struct tpm_vendor_specific)); - chip->dev_num = -1; + chip->dev_num = find_first_zero_bit(dev_mask, TPM_NUM_DEVICES); - for (i = 0; i < TPM_NUM_MASK_ENTRIES; i++) - for (j = 0; j < 8 * sizeof(int); j++) - if ((dev_mask[i] & (1 << j)) == 0) { - chip->dev_num = - i * TPM_NUM_MASK_ENTRIES + j; - dev_mask[i] |= 1 << j; - goto dev_num_search_complete; - } - -dev_num_search_complete: - if (chip->dev_num < 0) { + if (chip->dev_num >= TPM_NUM_DEVICES) { dev_err(dev, "No available tpm device numbers\n"); kfree(chip); return NULL; @@ -1137,6 +1124,8 @@ dev_num_search_complete: else chip->vendor.miscdev.minor = MISC_DYNAMIC_MINOR; + set_bit(chip->dev_num, dev_mask); + devname = kmalloc(DEVNAME_SIZE, GFP_KERNEL); scnprintf(devname, DEVNAME_SIZE, "%s%d", "tpm", chip->dev_num); chip->vendor.miscdev.name = devname; @@ -1150,8 +1139,8 @@ dev_num_search_complete: chip->vendor.miscdev.name, chip->vendor.miscdev.minor); put_device(dev); + clear_bit(chip->dev_num, dev_mask); kfree(chip); - dev_mask[i] &= !(1 << j); return NULL; } From e496f540540f0a0bffcc3f83785f9954dacf1b83 Mon Sep 17 00:00:00 2001 From: Marcel Selhorst Date: Sat, 22 Apr 2006 02:38:42 -0700 Subject: [PATCH 051/160] [PATCH] tpm: tpm_infineon updated to latest interface changes Apply the latest changes in the TPM interface to the Infineon TPM-driver. Signed-off-by: Marcel Selhorst Acked-by: Kylie Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_infineon.c | 58 ++++++++++++++++----------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 24095f6ee6da..90cae8f9fe21 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -104,7 +104,7 @@ static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo) if (clear_wrfifo) { for (i = 0; i < 4096; i++) { - status = inb(chip->vendor->base + WRFIFO); + status = inb(chip->vendor.base + WRFIFO); if (status == 0xff) { if (check == 5) break; @@ -124,8 +124,8 @@ static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo) */ i = 0; do { - status = inb(chip->vendor->base + RDFIFO); - status = inb(chip->vendor->base + STAT); + status = inb(chip->vendor.base + RDFIFO); + status = inb(chip->vendor.base + STAT); i++; if (i == TPM_MAX_TRIES) return -EIO; @@ -138,7 +138,7 @@ static int wait(struct tpm_chip *chip, int wait_for_bit) int status; int i; for (i = 0; i < TPM_MAX_TRIES; i++) { - status = inb(chip->vendor->base + STAT); + status = inb(chip->vendor.base + STAT); /* check the status-register if wait_for_bit is set */ if (status & 1 << wait_for_bit) break; @@ -157,7 +157,7 @@ static int wait(struct tpm_chip *chip, int wait_for_bit) static void wait_and_send(struct tpm_chip *chip, u8 sendbyte) { wait(chip, STAT_XFE); - outb(sendbyte, chip->vendor->base + WRFIFO); + outb(sendbyte, chip->vendor.base + WRFIFO); } /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more @@ -204,7 +204,7 @@ recv_begin: ret = wait(chip, STAT_RDA); if (ret) return -EIO; - buf[i] = inb(chip->vendor->base + RDFIFO); + buf[i] = inb(chip->vendor.base + RDFIFO); } if (buf[0] != TPM_VL_VER) { @@ -219,7 +219,7 @@ recv_begin: for (i = 0; i < size; i++) { wait(chip, STAT_RDA); - buf[i] = inb(chip->vendor->base + RDFIFO); + buf[i] = inb(chip->vendor.base + RDFIFO); } if ((size == 0x6D00) && (buf[1] == 0x80)) { @@ -268,7 +268,7 @@ static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count) u8 count_high, count_low, count_4, count_3, count_2, count_1; /* Disabling Reset, LP and IRQC */ - outb(RESET_LP_IRQC_DISABLE, chip->vendor->base + CMD); + outb(RESET_LP_IRQC_DISABLE, chip->vendor.base + CMD); ret = empty_fifo(chip, 1); if (ret) { @@ -319,7 +319,7 @@ static void tpm_inf_cancel(struct tpm_chip *chip) static u8 tpm_inf_status(struct tpm_chip *chip) { - return inb(chip->vendor->base + STAT); + return inb(chip->vendor.base + STAT); } static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); @@ -346,7 +346,7 @@ static struct file_operations inf_ops = { .release = tpm_release, }; -static struct tpm_vendor_specific tpm_inf = { +static const struct tpm_vendor_specific tpm_inf = { .recv = tpm_inf_recv, .send = tpm_inf_send, .cancel = tpm_inf_cancel, @@ -375,6 +375,7 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, int version[2]; int productid[2]; char chipname[20]; + struct tpm_chip *chip; /* read IO-ports through PnP */ if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && @@ -395,14 +396,13 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, goto err_last; } /* publish my base address and request region */ - tpm_inf.base = TPM_INF_BASE; if (request_region - (tpm_inf.base, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) { + (TPM_INF_BASE, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) { rc = -EINVAL; goto err_last; } - if (request_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN, - "tpm_infineon0") == NULL) { + if (request_region + (TPM_INF_ADDR, TPM_INF_ADDR_LEN, "tpm_infineon0") == NULL) { rc = -EINVAL; goto err_last; } @@ -442,9 +442,9 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, /* configure TPM with IO-ports */ outb(IOLIMH, TPM_INF_ADDR); - outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA); + outb(((TPM_INF_BASE >> 8) & 0xff), TPM_INF_DATA); outb(IOLIML, TPM_INF_ADDR); - outb((tpm_inf.base & 0xff), TPM_INF_DATA); + outb((TPM_INF_BASE & 0xff), TPM_INF_DATA); /* control if IO-ports are set correctly */ outb(IOLIMH, TPM_INF_ADDR); @@ -452,10 +452,10 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, outb(IOLIML, TPM_INF_ADDR); iol = inb(TPM_INF_DATA); - if ((ioh << 8 | iol) != tpm_inf.base) { + if ((ioh << 8 | iol) != TPM_INF_BASE) { dev_err(&dev->dev, - "Could not set IO-ports to 0x%lx\n", - tpm_inf.base); + "Could not set IO-ports to 0x%x\n", + TPM_INF_BASE); rc = -EIO; goto err_release_region; } @@ -466,15 +466,15 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, outb(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); /* disable RESET, LP and IRQC */ - outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD); + outb(RESET_LP_IRQC_DISABLE, TPM_INF_BASE + CMD); /* Finally, we're done, print some infos */ dev_info(&dev->dev, "TPM found: " "config base 0x%x, " "io base 0x%x, " - "chip version %02x%02x, " - "vendor id %x%x (Infineon), " - "product id %02x%02x" + "chip version 0x%02x%02x, " + "vendor id 0x%x%x (Infineon), " + "product id 0x%02x%02x" "%s\n", TPM_INF_ADDR, TPM_INF_BASE, @@ -482,11 +482,10 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, vendorid[0], vendorid[1], productid[0], productid[1], chipname); - rc = tpm_register_hardware(&dev->dev, &tpm_inf); - if (rc < 0) { - rc = -ENODEV; + if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf))) { goto err_release_region; } + chip->vendor.base = TPM_INF_BASE; return 0; } else { rc = -ENODEV; @@ -494,7 +493,7 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, } err_release_region: - release_region(tpm_inf.base, TPM_INF_PORT_LEN); + release_region(TPM_INF_BASE, TPM_INF_PORT_LEN); release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN); err_last: @@ -506,7 +505,8 @@ static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev) struct tpm_chip *chip = pnp_get_drvdata(dev); if (chip) { - release_region(chip->vendor->base, TPM_INF_PORT_LEN); + release_region(TPM_INF_BASE, TPM_INF_PORT_LEN); + release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN); tpm_remove_hardware(chip->dev); } } @@ -538,5 +538,5 @@ module_exit(cleanup_inf); MODULE_AUTHOR("Marcel Selhorst "); MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); -MODULE_VERSION("1.7"); +MODULE_VERSION("1.8"); MODULE_LICENSE("GPL"); From b09d53009db21228adde29b468eb4583e66cbe7c Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:38:55 -0700 Subject: [PATCH 052/160] [PATCH] tpm: check mem start and len The memory start and length values obtained from the ACPI entry need to be checked and filled in with the default values from the specification if they don't exist. This patch fills in the default values and uses them appropriately. Signed-off-by: Kylie Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_tis.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 1cb5a7f0755d..9c0727bf28b7 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -52,6 +52,8 @@ enum tis_int_flags { }; enum tis_defaults { + TIS_MEM_BASE = 0xFED4000, + TIS_MEM_LEN = 0x5000, TIS_SHORT_TIMEOUT = 750, /* ms */ TIS_LONG_TIMEOUT = 2000, /* 2 sec */ }; @@ -437,6 +439,11 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev start = pnp_mem_start(pnp_dev, 0); len = pnp_mem_len(pnp_dev, 0); + if (!start) + start = TIS_MEM_BASE; + if (!len) + len = TIS_MEM_LEN; + if (!(chip = tpm_register_hardware(&pnp_dev->dev, &tpm_tis))) return -ENODEV; From 8b006db604527c566dc1dd0aebae37714143aaef Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:39:07 -0700 Subject: [PATCH 053/160] [PATCH] tpm: update bios log code for 1.2 The acpi table which contains the BIOS log events was updated for 1.2. There are now client and server modes as defined in the specifications with slightly different formats. Additionally, the start field was even too small for the 1.1 version but had been working anyway. This patch updates the code to deal with any of the three types of headers probperly (1.1, 1.2 client and 1.2 server). Signed-off-by: Kylie Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_bios.c | 49 ++++++++++++++++++++++++++++--------- 1 file changed, 37 insertions(+), 12 deletions(-) diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index 5bcbaef53798..e45f0d3d12de 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -29,6 +29,11 @@ #define MAX_TEXT_EVENT 1000 /* Max event string length */ #define ACPI_TCPA_SIG "TCPA" /* 0x41504354 /'TCPA' */ +enum bios_platform_class { + BIOS_CLIENT = 0x00, + BIOS_SERVER = 0x01, +}; + struct tpm_bios_log { void *bios_event_log; void *bios_event_log_end; @@ -36,9 +41,18 @@ struct tpm_bios_log { struct acpi_tcpa { struct acpi_table_header hdr; - u16 reserved; - u32 log_max_len __attribute__ ((packed)); - u32 log_start_addr __attribute__ ((packed)); + u16 platform_class; + union { + struct client_hdr { + u32 log_max_len __attribute__ ((packed)); + u64 log_start_addr __attribute__ ((packed)); + } client; + struct server_hdr { + u16 reserved; + u64 log_max_len __attribute__ ((packed)); + u64 log_start_addr __attribute__ ((packed)); + } server; + }; }; struct tcpa_event { @@ -379,6 +393,7 @@ static int read_log(struct tpm_bios_log *log) struct acpi_tcpa *buff; acpi_status status; struct acpi_table_header *virt; + u64 len, start; if (log->bios_event_log != NULL) { printk(KERN_ERR @@ -399,27 +414,37 @@ static int read_log(struct tpm_bios_log *log) return -EIO; } - if (buff->log_max_len == 0) { + switch(buff->platform_class) { + case BIOS_SERVER: + len = buff->server.log_max_len; + start = buff->server.log_start_addr; + break; + case BIOS_CLIENT: + default: + len = buff->client.log_max_len; + start = buff->client.log_start_addr; + break; + } + if (!len) { printk(KERN_ERR "%s: ERROR - TCPA log area empty\n", __func__); return -EIO; } /* malloc EventLog space */ - log->bios_event_log = kmalloc(buff->log_max_len, GFP_KERNEL); + log->bios_event_log = kmalloc(len, GFP_KERNEL); if (!log->bios_event_log) { - printk - ("%s: ERROR - Not enough Memory for BIOS measurements\n", - __func__); + printk("%s: ERROR - Not enough Memory for BIOS measurements\n", + __func__); return -ENOMEM; } - log->bios_event_log_end = log->bios_event_log + buff->log_max_len; + log->bios_event_log_end = log->bios_event_log + len; - acpi_os_map_memory(buff->log_start_addr, buff->log_max_len, (void *) &virt); + acpi_os_map_memory(start, len, (void *) &virt); - memcpy(log->bios_event_log, virt, buff->log_max_len); + memcpy(log->bios_event_log, virt, len); - acpi_os_unmap_memory(virt, buff->log_max_len); + acpi_os_unmap_memory(virt, len); return 0; } From 397c718299d848ff305ecd955838a9bd32f1f881 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 22 Apr 2006 02:39:18 -0700 Subject: [PATCH 054/160] [PATCH] tpm_infineon section fixup Use __devexit_p() for the exit/remove function to protect against discarding it. WARNING: drivers/char/tpm/tpm_infineon.o - Section mismatch: reference to .exit.text:tpm_inf_pnp_remove from .data between 'tpm_inf_pnp' (at offset 0x20) and 'tpm_inf' Signed-off-by: Randy Dunlap Cc: Kylene Jo Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_infineon.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 90cae8f9fe21..adfff21beb21 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -15,6 +15,7 @@ * License. */ +#include #include #include "tpm.h" @@ -520,7 +521,7 @@ static struct pnp_driver tpm_inf_pnp = { }, .id_table = tpm_pnp_tbl, .probe = tpm_inf_pnp_probe, - .remove = tpm_inf_pnp_remove, + .remove = __devexit_p(tpm_inf_pnp_remove), }; static int __init init_inf(void) From cb5354253af2bc30ed449b8be4b3bddf3b3a2746 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:39:31 -0700 Subject: [PATCH 055/160] [PATCH] tpm: spacing cleanups 2 Fixes minor spacing issues. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_tis.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 9c0727bf28b7..398514745d3f 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -54,8 +54,8 @@ enum tis_int_flags { enum tis_defaults { TIS_MEM_BASE = 0xFED4000, TIS_MEM_LEN = 0x5000, - TIS_SHORT_TIMEOUT = 750, /* ms */ - TIS_LONG_TIMEOUT = 2000, /* 2 sec */ + TIS_SHORT_TIMEOUT = 750, /* ms */ + TIS_LONG_TIMEOUT = 2000, /* 2 sec */ }; #define TPM_ACCESS(l) (0x0000 | ((l) << 12)) @@ -188,7 +188,7 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, return -ETIME; } -static int recv_data(struct tpm_chip *chip, u8 * buf, size_t count) +static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) { int size = 0, burstcnt; while (size < count && @@ -206,7 +206,7 @@ static int recv_data(struct tpm_chip *chip, u8 * buf, size_t count) return size; } -static int tpm_tis_recv(struct tpm_chip *chip, u8 * buf, size_t count) +static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count) { int size = 0; int expected, status; @@ -257,7 +257,7 @@ out: * tpm.c can skip polling for the data to be available as the interrupt is * waited for here */ -static int tpm_tis_send(struct tpm_chip *chip, u8 * buf, size_t len) +static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len) { int rc, status, burstcnt; size_t count = 0; @@ -374,8 +374,7 @@ static struct tpm_vendor_specific tpm_tis = { .fops = &tis_ops,}, }; -static irqreturn_t tis_int_probe(int irq, void *dev_id, struct pt_regs - *regs) +static irqreturn_t tis_int_probe(int irq, void *dev_id, struct pt_regs *regs) { struct tpm_chip *chip = (struct tpm_chip *) dev_id; u32 interrupt; @@ -395,8 +394,7 @@ static irqreturn_t tis_int_probe(int irq, void *dev_id, struct pt_regs return IRQ_HANDLED; } -static irqreturn_t tis_int_handler(int irq, void *dev_id, struct pt_regs - *regs) +static irqreturn_t tis_int_handler(int irq, void *dev_id, struct pt_regs *regs) { struct tpm_chip *chip = (struct tpm_chip *) dev_id; u32 interrupt; @@ -426,10 +424,8 @@ static irqreturn_t tis_int_handler(int irq, void *dev_id, struct pt_regs return IRQ_HANDLED; } -static int __devinit tpm_tis_pnp_init(struct pnp_dev - *pnp_dev, const struct - pnp_device_id - *pnp_id) +static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev, + const struct pnp_device_id *pnp_id) { u32 vendor, intfcaps, intmask; int rc, i; From 5713556843aee24f484f445db6540f9fef976439 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:39:44 -0700 Subject: [PATCH 056/160] [PATCH] tpm: add interrupt module parameter This patch adds a boolean module parameter that allows the user to turn interrupt support on and off. The default behavior is to attempt to use interrupts. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_tis.c | 80 +++++++++++++++++++++----------------- 1 file changed, 44 insertions(+), 36 deletions(-) diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 398514745d3f..447f76388067 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -16,6 +16,9 @@ * published by the Free Software Foundation, version 2 of the * License. */ +#include +#include +#include #include #include #include @@ -424,6 +427,10 @@ static irqreturn_t tis_int_handler(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } +static int interrupts = 1; +module_param(interrupts, bool, 0444); +MODULE_PARM_DESC(interrupts, "Enable interrupts"); + static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev, const struct pnp_device_id *pnp_id) { @@ -510,44 +517,44 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev, iowrite32(intmask, chip->vendor.iobase + TPM_INT_ENABLE(chip->vendor.locality)); + if (interrupts) { + chip->vendor.irq = + ioread8(chip->vendor.iobase + + TPM_INT_VECTOR(chip->vendor.locality)); - chip->vendor.irq = - ioread8(chip->vendor.iobase + - TPM_INT_VECTOR(chip->vendor.locality)); + for (i = 3; i < 16 && chip->vendor.irq == 0; i++) { + iowrite8(i, chip->vendor.iobase + + TPM_INT_VECTOR(chip->vendor.locality)); + if (request_irq + (i, tis_int_probe, SA_SHIRQ, + chip->vendor.miscdev.name, chip) != 0) { + dev_info(chip->dev, + "Unable to request irq: %d for probe\n", + i); + continue; + } - for (i = 3; i < 16 && chip->vendor.irq == 0; i++) { - iowrite8(i, - chip->vendor.iobase + - TPM_INT_VECTOR(chip->vendor.locality)); - if (request_irq - (i, tis_int_probe, SA_SHIRQ, - chip->vendor.miscdev.name, chip) != 0) { - dev_info(chip->dev, - "Unable to request irq: %d for probe\n", - i); - continue; + /* Clear all existing */ + iowrite32(ioread32 + (chip->vendor.iobase + + TPM_INT_STATUS(chip->vendor.locality)), + chip->vendor.iobase + + TPM_INT_STATUS(chip->vendor.locality)); + + /* Turn on */ + iowrite32(intmask | TPM_GLOBAL_INT_ENABLE, + chip->vendor.iobase + + TPM_INT_ENABLE(chip->vendor.locality)); + + /* Generate Interrupts */ + tpm_gen_interrupt(chip); + + /* Turn off */ + iowrite32(intmask, + chip->vendor.iobase + + TPM_INT_ENABLE(chip->vendor.locality)); + free_irq(i, chip); } - - /* Clear all existing */ - iowrite32(ioread32 - (chip->vendor.iobase + - TPM_INT_STATUS(chip->vendor.locality)), - chip->vendor.iobase + - TPM_INT_STATUS(chip->vendor.locality)); - - /* Turn on */ - iowrite32(intmask | TPM_GLOBAL_INT_ENABLE, - chip->vendor.iobase + - TPM_INT_ENABLE(chip->vendor.locality)); - - /* Generate Interrupts */ - tpm_gen_interrupt(chip); - - /* Turn off */ - iowrite32(intmask, - chip->vendor.iobase + - TPM_INT_ENABLE(chip->vendor.locality)); - free_irq(i, chip); } if (chip->vendor.irq) { iowrite8(chip->vendor.irq, @@ -557,7 +564,8 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev, (chip->vendor.irq, tis_int_handler, SA_SHIRQ, chip->vendor.miscdev.name, chip) != 0) { dev_info(chip->dev, - "Unable to request irq: %d for use\n", i); + "Unable to request irq: %d for use\n", + chip->vendor.irq); chip->vendor.irq = 0; } else { /* Clear all existing */ From 93e1b7d42e1edb4ddde6257e9a02513fef26f715 Mon Sep 17 00:00:00 2001 From: Kylene Jo Hall Date: Sat, 22 Apr 2006 02:39:52 -0700 Subject: [PATCH 057/160] [PATCH] tpm: add HID module parameter I recently found that not all BIOS manufacturers are using the specified generic PNP id in their TPM ACPI table entry. I have added the vendor specific IDs that I know about and added a module parameter that a user can specify another HID to the probe list if their device isn't being found by the default list. Signed-off-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_tis.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 447f76388067..b9cae9a238bb 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -610,7 +610,13 @@ static int tpm_tis_pnp_resume(struct pnp_dev *dev) static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = { {"PNP0C31", 0}, /* TPM */ - {"", 0} + {"ATM1200", 0}, /* Atmel */ + {"IFX0102", 0}, /* Infineon */ + {"BCM0101", 0}, /* Broadcom */ + {"NSC1200", 0}, /* National */ + /* Add new here */ + {"", 0}, /* User Specified */ + {"", 0} /* Terminator */ }; static struct pnp_driver tis_pnp_driver = { @@ -621,6 +627,11 @@ static struct pnp_driver tis_pnp_driver = { .resume = tpm_tis_pnp_resume, }; +#define TIS_HID_USR_IDX sizeof(tpm_pnp_tbl)/sizeof(struct pnp_device_id) -2 +module_param_string(hid, tpm_pnp_tbl[TIS_HID_USR_IDX].id, + sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444); +MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe"); + static int __init init_tis(void) { return pnp_register_driver(&tis_pnp_driver); From b66ac3ea21f81dea02cdb4e9de66ee6afdc540e4 Mon Sep 17 00:00:00 2001 From: Steve French Date: Sun, 23 Apr 2006 01:54:50 +0000 Subject: [PATCH 058/160] [CIFS] Fix typo in previous Signed-off-by: Steve French --- fs/cifs/readdir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 41c022e3c132..b689c5035124 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -766,7 +766,7 @@ static int cifs_filldir(char *pfindEntry, struct file *file, if(file->f_dentry == NULL) return -ENOENT; - rc = cifs_entry_is_dot(pfindEntry,cifsF); + rc = cifs_entry_is_dot(pfindEntry,pCifsF); /* skip . and .. since we added them first */ if(rc != 0) return 0; From caa98c41c0db9bfda5bc9a0e680f304283089268 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 23 Apr 2006 18:14:00 +1000 Subject: [PATCH 059/160] drm: fixup r300 scratch on BE machines This fixes the r300 scratch stuff to work on PPC, from Ben Herrenschmidt on IRC. Signed-off-by: Dave Airlie --- drivers/char/drm/r300_cmdbuf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index b108c7f913b2..26bdf2ca59d7 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -723,7 +723,7 @@ static int r300_scratch(drm_radeon_private_t *dev_priv, dev_priv->scratch_ages[header.scratch.reg]++; - ref_age_base = *(u32 **)cmdbuf->buf; + ref_age_base = (u32 *)(unsigned long)*((uint64_t *)cmdbuf->buf); cmdbuf->buf += sizeof(u64); cmdbuf->bufsz -= sizeof(u64); From 5d23fafb1bf8ef071738026c2e5071a92186d5f8 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 23 Apr 2006 18:26:40 +1000 Subject: [PATCH 060/160] drm: possible cleanups This patch contains the following possible cleanups: - make the following needlessly global function static: - drm_bufs.c: drm_addbufs_fb() - remove the following unused EXPORT_SYMBOL's: - drm_agpsupport.c: drm_agp_bind_memory - drm_bufs.c: drm_rmmap_locked - drm_bufs.c: drm_rmmap - drm_stub.c: drm_get_dev Signed-off-by: Adrian Bunk Signed-off-by: Dave Airlie --- drivers/char/drm/drmP.h | 1 - drivers/char/drm/drm_agpsupport.c | 2 -- drivers/char/drm/drm_bufs.c | 5 +---- drivers/char/drm/drm_stub.c | 2 -- 4 files changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index e1aadae00623..cb76e5ca9a23 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -889,7 +889,6 @@ extern int drm_lock_free(drm_device_t * dev, /* Buffer management support (drm_bufs.h) */ extern int drm_addbufs_agp(drm_device_t * dev, drm_buf_desc_t * request); extern int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request); -extern int drm_addbufs_fb(drm_device_t *dev, drm_buf_desc_t *request); extern int drm_addmap(drm_device_t * dev, unsigned int offset, unsigned int size, drm_map_type_t type, drm_map_flags_t flags, drm_local_map_t ** map_ptr); diff --git a/drivers/char/drm/drm_agpsupport.c b/drivers/char/drm/drm_agpsupport.c index fabc930c67a2..40bfd9b01e39 100644 --- a/drivers/char/drm/drm_agpsupport.c +++ b/drivers/char/drm/drm_agpsupport.c @@ -503,8 +503,6 @@ int drm_agp_bind_memory(DRM_AGP_MEM * handle, off_t start) return agp_bind_memory(handle, start); } -EXPORT_SYMBOL(drm_agp_bind_memory); - /** Calls agp_unbind_memory() */ int drm_agp_unbind_memory(DRM_AGP_MEM * handle) { diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index 8a9cf12e6183..006b06d29727 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -386,7 +386,6 @@ int drm_rmmap_locked(drm_device_t *dev, drm_local_map_t *map) return 0; } -EXPORT_SYMBOL(drm_rmmap_locked); int drm_rmmap(drm_device_t *dev, drm_local_map_t *map) { @@ -398,7 +397,6 @@ int drm_rmmap(drm_device_t *dev, drm_local_map_t *map) return ret; } -EXPORT_SYMBOL(drm_rmmap); /* The rmmap ioctl appears to be unnecessary. All mappings are torn down on * the last close of the device, and this is necessary for cleanup when things @@ -1053,7 +1051,7 @@ static int drm_addbufs_sg(drm_device_t * dev, drm_buf_desc_t * request) return 0; } -int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request) +static int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request) { drm_device_dma_t *dma = dev->dma; drm_buf_entry_t *entry; @@ -1212,7 +1210,6 @@ int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request) atomic_dec(&dev->buf_alloc); return 0; } -EXPORT_SYMBOL(drm_addbufs_fb); /** diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c index 68073e14fdec..9a842a36bb27 100644 --- a/drivers/char/drm/drm_stub.c +++ b/drivers/char/drm/drm_stub.c @@ -229,8 +229,6 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, return ret; } -EXPORT_SYMBOL(drm_get_dev); - /** * Put a device minor number. * From 3b920cef3470b7199acd2dc26e09fb9291131976 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 24 Apr 2006 09:45:35 +0100 Subject: [PATCH 061/160] [ARM] nommu: trivial fixups for head-nommu.S and the Makefile This patch fix compilation problem of start-up codes. (head-nommu.S, arch/arm/kernel/Makefile) Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/kernel/Makefile | 2 +- arch/arm/kernel/head-nommu.S | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 2ce0e3a27a45..a601b8b55f35 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,7 +29,7 @@ ifneq ($(CONFIG_ARCH_EBSA110),y) obj-y += io.o endif -head-y := head.o +head-y := head$(MMUEXT).o obj-$(CONFIG_DEBUG_LL) += debug.o extra-y := $(head-y) init_task.o vmlinux.lds diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index b093ab8738b5..0bea65864051 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -20,10 +20,11 @@ #include #include #include -#include +#include #include #define PROCINFO_INITFUNC 12 +#define MACHINFO_TYPE 0 /* * Kernel startup entry point. @@ -79,5 +80,6 @@ __after_proc_init: mov pc, r13 @ clear the BSS and jump @ to start_kernel + .ltorg #include "head-common.S" From 3d63abe56be2147891b3438cb3bd37a9be72bda7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 24 Apr 2006 11:27:02 +0100 Subject: [PATCH 062/160] [MMC] pxamci: fix data timeout calculation The MMC layer gives us two parts for the timeout calculation - a fixed timeout in nanoseconds, and a card clock-speed dependent part. The PXA MMC hardware allows for a timeout based on the fixed host clock speed only. This resulted in some cards being given a short timeout, and therefore failing to work. Signed-off-by: Russell King --- drivers/mmc/pxamci.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index eb9a8826e9b5..eb42cb349420 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -65,11 +65,6 @@ struct pxamci_host { unsigned int dma_dir; }; -static inline unsigned int ns_to_clocks(unsigned int ns) -{ - return (ns * (CLOCKRATE / 1000000) + 999) / 1000; -} - static void pxamci_stop_clock(struct pxamci_host *host) { if (readl(host->base + MMC_STAT) & STAT_CLK_EN) { @@ -113,6 +108,7 @@ static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask) static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) { unsigned int nob = data->blocks; + unsigned long long clks; unsigned int timeout; u32 dcmd; int i; @@ -125,7 +121,9 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) writel(nob, host->base + MMC_NOB); writel(1 << data->blksz_bits, host->base + MMC_BLKLEN); - timeout = ns_to_clocks(data->timeout_ns) + data->timeout_clks; + clks = (unsigned long long)data->timeout_ns * CLOCKRATE; + do_div(clks, 1000000000UL); + timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt); writel((timeout + 255) / 256, host->base + MMC_RDTO); if (data->flags & MMC_DATA_READ) { From 301dc3e6f6ea83703fa52919c00e60661da5a8fe Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 24 Apr 2006 16:24:54 +0000 Subject: [PATCH 063/160] [CIFS] Fix compile error when CONFIG_CIFS_EXPERIMENTAL is undefined Signed-off-by: Dave Kleikamp Signed-off-by: Steve French --- fs/cifs/connect.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index aaf151cb5822..d2ec806a4f32 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3447,10 +3447,13 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, pSesInfo->server->secMode, pSesInfo->server->capabilities, pSesInfo->server->timeZone)); +#ifdef CONFIG_CIFS_EXPERIMENTAL if(experimEnabled > 1) rc = CIFS_SessSetup(xid, pSesInfo, CIFS_NTLM /* type */, &ntlmv2_flag, nls_info); - else if (extended_security + else +#endif + if (extended_security && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY) && (pSesInfo->server->secType == NTLMSSP)) { cFYI(1, ("New style sesssetup")); From dac322e39a2b82871cf514c9a533f24a1b4c7e19 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Mon, 17 Apr 2006 11:36:43 -0400 Subject: [PATCH 064/160] [PATCH] Fix crash on big-endian systems during scan The original code was doing arithmetics on a little-endian value. Reported by Stelios Koroneos Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 8b37e824dfcb..8399de581893 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1860,7 +1860,7 @@ static char * __prism2_translate_scan(local_info_t *local, memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWFREQ; if (scan) { - chan = scan->chid; + chan = le16_to_cpu(scan->chid); } else if (bss) { chan = bss->chan; } else { @@ -1868,7 +1868,7 @@ static char * __prism2_translate_scan(local_info_t *local, } if (chan > 0) { - iwe.u.freq.m = freq_list[le16_to_cpu(chan - 1)] * 100000; + iwe.u.freq.m = freq_list[chan - 1] * 100000; iwe.u.freq.e = 1; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); From 818667f7c40dd0bd14029b5ac1d0f5282e12310e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 20 Apr 2006 20:02:03 +0200 Subject: [PATCH 065/160] [PATCH] softmac: fix SIOCSIWAP There are some bugs in the current implementation of the SIOCSIWAP wext, for example that when you do it twice and it fails, it may still try another access point for some reason. This patch fixes this by introducing a new flag that tells the association code that the bssid that is in use was fixed by the user and shouldn't be deviated from. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/ieee80211softmac.h | 5 +++- .../softmac/ieee80211softmac_assoc.c | 20 +++++++++++--- .../softmac/ieee80211softmac_module.c | 2 ++ net/ieee80211/softmac/ieee80211softmac_wx.c | 27 ++++++++++++------- 4 files changed, 39 insertions(+), 15 deletions(-) diff --git a/include/net/ieee80211softmac.h b/include/net/ieee80211softmac.h index 6b3693f05ca0..b1ebfbae397f 100644 --- a/include/net/ieee80211softmac.h +++ b/include/net/ieee80211softmac.h @@ -96,10 +96,13 @@ struct ieee80211softmac_assoc_info { * * bssvalid is true if we found a matching network * and saved it's BSSID into the bssid above. + * + * bssfixed is used for SIOCSIWAP. */ u8 static_essid:1, associating:1, - bssvalid:1; + bssvalid:1, + bssfixed:1; /* Scan retries remaining */ int scan_retry; diff --git a/net/ieee80211/softmac/ieee80211softmac_assoc.c b/net/ieee80211/softmac/ieee80211softmac_assoc.c index 4498023841dc..fb79ce7d6439 100644 --- a/net/ieee80211/softmac/ieee80211softmac_assoc.c +++ b/net/ieee80211/softmac/ieee80211softmac_assoc.c @@ -144,6 +144,12 @@ network_matches_request(struct ieee80211softmac_device *mac, struct ieee80211_ne if (!we_support_all_basic_rates(mac, net->rates_ex, net->rates_ex_len)) return 0; + /* assume that users know what they're doing ... + * (note we don't let them select a net we're incompatible with) */ + if (mac->associnfo.bssfixed) { + return !memcmp(mac->associnfo.bssid, net->bssid, ETH_ALEN); + } + /* if 'ANY' network requested, take any that doesn't have privacy enabled */ if (mac->associnfo.req_essid.len == 0 && !(net->capability & WLAN_CAPABILITY_PRIVACY)) @@ -176,7 +182,7 @@ ieee80211softmac_assoc_work(void *d) ieee80211softmac_disassoc(mac, WLAN_REASON_DISASSOC_STA_HAS_LEFT); /* try to find the requested network in our list, if we found one already */ - if (mac->associnfo.bssvalid) + if (mac->associnfo.bssvalid || mac->associnfo.bssfixed) found = ieee80211softmac_get_network_by_bssid(mac, mac->associnfo.bssid); /* Search the ieee80211 networks for this network if we didn't find it by bssid, @@ -241,19 +247,25 @@ ieee80211softmac_assoc_work(void *d) if (ieee80211softmac_start_scan(mac)) dprintk(KERN_INFO PFX "Associate: failed to initiate scan. Is device up?\n"); return; - } - else { + } else { spin_lock_irqsave(&mac->lock, flags); mac->associnfo.associating = 0; mac->associated = 0; spin_unlock_irqrestore(&mac->lock, flags); dprintk(KERN_INFO PFX "Unable to find matching network after scan!\n"); + /* reset the retry counter for the next user request since we + * break out and don't reschedule ourselves after this point. */ + mac->associnfo.scan_retry = IEEE80211SOFTMAC_ASSOC_SCAN_RETRY_LIMIT; ieee80211softmac_call_events(mac, IEEE80211SOFTMAC_EVENT_ASSOCIATE_NET_NOT_FOUND, NULL); return; } } - + + /* reset the retry counter for the next user request since we + * now found a net and will try to associate to it, but not + * schedule this function again. */ + mac->associnfo.scan_retry = IEEE80211SOFTMAC_ASSOC_SCAN_RETRY_LIMIT; mac->associnfo.bssvalid = 1; memcpy(mac->associnfo.bssid, found->bssid, ETH_ALEN); /* copy the ESSID for displaying it */ diff --git a/net/ieee80211/softmac/ieee80211softmac_module.c b/net/ieee80211/softmac/ieee80211softmac_module.c index 60f06a31f0d1..be83bdc1644a 100644 --- a/net/ieee80211/softmac/ieee80211softmac_module.c +++ b/net/ieee80211/softmac/ieee80211softmac_module.c @@ -45,6 +45,8 @@ struct net_device *alloc_ieee80211softmac(int sizeof_priv) softmac->ieee->handle_disassoc = ieee80211softmac_handle_disassoc; softmac->scaninfo = NULL; + softmac->associnfo.scan_retry = IEEE80211SOFTMAC_ASSOC_SCAN_RETRY_LIMIT; + /* TODO: initialise all the other callbacks in the ieee struct * (once they're written) */ diff --git a/net/ieee80211/softmac/ieee80211softmac_wx.c b/net/ieee80211/softmac/ieee80211softmac_wx.c index 00f0d4f71897..27edb2b5581a 100644 --- a/net/ieee80211/softmac/ieee80211softmac_wx.c +++ b/net/ieee80211/softmac/ieee80211softmac_wx.c @@ -27,7 +27,8 @@ #include "ieee80211softmac_priv.h" #include - +/* for is_broadcast_ether_addr and is_zero_ether_addr */ +#include int ieee80211softmac_wx_trigger_scan(struct net_device *net_dev, @@ -83,7 +84,6 @@ ieee80211softmac_wx_set_essid(struct net_device *net_dev, sm->associnfo.static_essid = 1; } } - sm->associnfo.scan_retry = IEEE80211SOFTMAC_ASSOC_SCAN_RETRY_LIMIT; /* set our requested ESSID length. * If applicable, we have already copied the data in */ @@ -310,8 +310,6 @@ ieee80211softmac_wx_set_wap(struct net_device *net_dev, char *extra) { struct ieee80211softmac_device *mac = ieee80211_priv(net_dev); - static const unsigned char any[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; - static const unsigned char off[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; unsigned long flags; /* sanity check */ @@ -320,10 +318,17 @@ ieee80211softmac_wx_set_wap(struct net_device *net_dev, } spin_lock_irqsave(&mac->lock, flags); - if (!memcmp(any, data->ap_addr.sa_data, ETH_ALEN) || - !memcmp(off, data->ap_addr.sa_data, ETH_ALEN)) { - schedule_work(&mac->associnfo.work); - goto out; + if (is_broadcast_ether_addr(data->ap_addr.sa_data)) { + /* the bssid we have is not to be fixed any longer, + * and we should reassociate to the best AP. */ + mac->associnfo.bssfixed = 0; + /* force reassociation */ + mac->associnfo.bssvalid = 0; + if (mac->associated) + schedule_work(&mac->associnfo.work); + } else if (is_zero_ether_addr(data->ap_addr.sa_data)) { + /* the bssid we have is no longer fixed */ + mac->associnfo.bssfixed = 0; } else { if (!memcmp(mac->associnfo.bssid, data->ap_addr.sa_data, ETH_ALEN)) { if (mac->associnfo.associating || mac->associated) { @@ -333,12 +338,14 @@ ieee80211softmac_wx_set_wap(struct net_device *net_dev, } else { /* copy new value in data->ap_addr.sa_data to bssid */ memcpy(mac->associnfo.bssid, data->ap_addr.sa_data, ETH_ALEN); - } + } + /* tell the other code that this bssid should be used no matter what */ + mac->associnfo.bssfixed = 1; /* queue associate if new bssid or (old one again and not associated) */ schedule_work(&mac->associnfo.work); } -out: + out: spin_unlock_irqrestore(&mac->lock, flags); return 0; } From 9eac8f95d1bb2cec96340505bed2d2387780821f Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sat, 22 Apr 2006 17:31:27 +0200 Subject: [PATCH 066/160] [PATCH] bcm43xx: add to MAINTAINERS Signed-off-by: John W. Linville --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 4e1e8175eb6d..d6a8e5b434ec 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -421,6 +421,14 @@ L: linux-hams@vger.kernel.org W: http://www.baycom.org/~tom/ham/ham.html S: Maintained +BCM43XX WIRELESS DRIVER +P: Michael Buesch +M: mb@bu3sch.de +P: Stefano Brivio +M: st3@riseup.net +W: http://bcm43xx.berlios.de/ +S: Maintained + BEFS FILE SYSTEM P: Sergey S. Kostyliov M: rathamahata@php4.ru From 7c241d37fe0e6442c5cf3b5d73f7f58f2dc66352 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sun, 23 Apr 2006 13:23:10 +0200 Subject: [PATCH 067/160] [PATCH] bcm43xx: make PIO mode usable This patch fixes PIO mode on the softmac bcm43xx driver. (A dscape patch will follow). It mainly fixes endianess issues. This patch is tested on PowerPC32 and i386. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_dma.h | 8 ++ drivers/net/wireless/bcm43xx/bcm43xx_pio.c | 92 +++++++++++++++------- drivers/net/wireless/bcm43xx/bcm43xx_pio.h | 16 +++- 3 files changed, 84 insertions(+), 32 deletions(-) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.h b/drivers/net/wireless/bcm43xx/bcm43xx_dma.h index 2d520e4b0276..b7d77638ba8c 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.h @@ -213,6 +213,14 @@ static inline void bcm43xx_dma_rx(struct bcm43xx_dmaring *ring) { } +static inline +void bcm43xx_dma_tx_suspend(struct bcm43xx_dmaring *ring) +{ +} +static inline +void bcm43xx_dma_tx_resume(struct bcm43xx_dmaring *ring) +{ +} #endif /* CONFIG_BCM43XX_DMA */ #endif /* BCM43xx_DMA_H_ */ diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_pio.c b/drivers/net/wireless/bcm43xx/bcm43xx_pio.c index c59ddd40680d..0aa1bd269a25 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_pio.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_pio.c @@ -27,6 +27,7 @@ #include "bcm43xx_pio.h" #include "bcm43xx_main.h" #include "bcm43xx_xmit.h" +#include "bcm43xx_power.h" #include @@ -44,10 +45,10 @@ static void tx_octet(struct bcm43xx_pioqueue *queue, bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA, octet); bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL, - BCM43xx_PIO_TXCTL_WRITEHI); + BCM43xx_PIO_TXCTL_WRITELO); } else { bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL, - BCM43xx_PIO_TXCTL_WRITEHI); + BCM43xx_PIO_TXCTL_WRITELO); bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA, octet); } @@ -103,7 +104,7 @@ static void tx_complete(struct bcm43xx_pioqueue *queue, bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA, skb->data[skb->len - 1]); bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL, - BCM43xx_PIO_TXCTL_WRITEHI | + BCM43xx_PIO_TXCTL_WRITELO | BCM43xx_PIO_TXCTL_COMPLETE); } else { bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL, @@ -112,9 +113,10 @@ static void tx_complete(struct bcm43xx_pioqueue *queue, } static u16 generate_cookie(struct bcm43xx_pioqueue *queue, - int packetindex) + struct bcm43xx_pio_txpacket *packet) { u16 cookie = 0x0000; + int packetindex; /* We use the upper 4 bits for the PIO * controller ID and the lower 12 bits @@ -135,6 +137,7 @@ static u16 generate_cookie(struct bcm43xx_pioqueue *queue, default: assert(0); } + packetindex = pio_txpacket_getindex(packet); assert(((u16)packetindex & 0xF000) == 0x0000); cookie |= (u16)packetindex; @@ -184,7 +187,7 @@ static void pio_tx_write_fragment(struct bcm43xx_pioqueue *queue, bcm43xx_generate_txhdr(queue->bcm, &txhdr, skb->data, skb->len, (packet->xmitted_frags == 0), - generate_cookie(queue, pio_txpacket_getindex(packet))); + generate_cookie(queue, packet)); tx_start(queue); octets = skb->len + sizeof(txhdr); @@ -241,7 +244,7 @@ static int pio_tx_packet(struct bcm43xx_pio_txpacket *packet) queue->tx_devq_packets++; queue->tx_devq_used += octets; - assert(packet->xmitted_frags <= packet->txb->nr_frags); + assert(packet->xmitted_frags < packet->txb->nr_frags); packet->xmitted_frags++; packet->xmitted_octets += octets; } @@ -257,8 +260,14 @@ static void tx_tasklet(unsigned long d) unsigned long flags; struct bcm43xx_pio_txpacket *packet, *tmp_packet; int err; + u16 txctl; bcm43xx_lock_mmio(bcm, flags); + + txctl = bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL); + if (txctl & BCM43xx_PIO_TXCTL_SUSPEND) + goto out_unlock; + list_for_each_entry_safe(packet, tmp_packet, &queue->txqueue, list) { assert(packet->xmitted_frags < packet->txb->nr_frags); if (packet->xmitted_frags == 0) { @@ -288,6 +297,7 @@ static void tx_tasklet(unsigned long d) next_packet: continue; } +out_unlock: bcm43xx_unlock_mmio(bcm, flags); } @@ -330,12 +340,19 @@ struct bcm43xx_pioqueue * bcm43xx_setup_pioqueue(struct bcm43xx_private *bcm, (unsigned long)queue); value = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD); - value |= BCM43xx_SBF_XFER_REG_BYTESWAP; + value &= ~BCM43xx_SBF_XFER_REG_BYTESWAP; bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value); qsize = bcm43xx_read16(bcm, queue->mmio_base + BCM43xx_PIO_TXQBUFSIZE); + if (qsize == 0) { + printk(KERN_ERR PFX "ERROR: This card does not support PIO " + "operation mode. Please use DMA mode " + "(module parameter pio=0).\n"); + goto err_freequeue; + } if (qsize <= BCM43xx_PIO_TXQADJUST) { - printk(KERN_ERR PFX "PIO tx device-queue too small (%u)\n", qsize); + printk(KERN_ERR PFX "PIO tx device-queue too small (%u)\n", + qsize); goto err_freequeue; } qsize -= BCM43xx_PIO_TXQADJUST; @@ -444,15 +461,10 @@ int bcm43xx_pio_tx(struct bcm43xx_private *bcm, { struct bcm43xx_pioqueue *queue = bcm43xx_current_pio(bcm)->queue1; struct bcm43xx_pio_txpacket *packet; - u16 tmp; assert(!queue->tx_suspended); assert(!list_empty(&queue->txfree)); - tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL); - if (tmp & BCM43xx_PIO_TXCTL_SUSPEND) - return -EBUSY; - packet = list_entry(queue->txfree.next, struct bcm43xx_pio_txpacket, list); packet->txb = txb; packet->xmitted_frags = 0; @@ -462,7 +474,7 @@ int bcm43xx_pio_tx(struct bcm43xx_private *bcm, assert(queue->nr_txfree < BCM43xx_PIO_MAXTXPACKETS); /* Suspend TX, if we are out of packets in the "free" queue. */ - if (unlikely(list_empty(&queue->txfree))) { + if (list_empty(&queue->txfree)) { netif_stop_queue(queue->bcm->net_dev); queue->tx_suspended = 1; } @@ -480,15 +492,15 @@ void bcm43xx_pio_handle_xmitstatus(struct bcm43xx_private *bcm, queue = parse_cookie(bcm, status->cookie, &packet); assert(queue); -//TODO -if (!queue) -return; + free_txpacket(packet, 1); - if (unlikely(queue->tx_suspended)) { + if (queue->tx_suspended) { queue->tx_suspended = 0; netif_wake_queue(queue->bcm->net_dev); } - /* If there are packets on the txqueue, poke the tasklet. */ + /* If there are packets on the txqueue, poke the tasklet + * to transmit them. + */ if (!list_empty(&queue->txqueue)) tasklet_schedule(&queue->txtask); } @@ -519,12 +531,9 @@ void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue) int i, preamble_readwords; struct sk_buff *skb; -return; tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXCTL); - if (!(tmp & BCM43xx_PIO_RXCTL_DATAAVAILABLE)) { - dprintkl(KERN_ERR PFX "PIO RX: No data available\n");//TODO: remove this printk. + if (!(tmp & BCM43xx_PIO_RXCTL_DATAAVAILABLE)) return; - } bcm43xx_pio_write(queue, BCM43xx_PIO_RXCTL, BCM43xx_PIO_RXCTL_DATAAVAILABLE); @@ -538,8 +547,7 @@ return; return; data_ready: -//FIXME: endianess in this function. - len = le16_to_cpu(bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA)); + len = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA); if (unlikely(len > 0x700)) { pio_rx_error(queue, 0, "len > 0x700"); return; @@ -555,7 +563,7 @@ data_ready: preamble_readwords = 18 / sizeof(u16); for (i = 0; i < preamble_readwords; i++) { tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA); - preamble[i + 1] = cpu_to_be16(tmp);//FIXME? + preamble[i + 1] = cpu_to_le16(tmp); } rxhdr = (struct bcm43xx_rxhdr *)preamble; rxflags2 = le16_to_cpu(rxhdr->flags2); @@ -591,16 +599,40 @@ data_ready: } skb_put(skb, len); for (i = 0; i < len - 1; i += 2) { - tmp = cpu_to_be16(bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA)); - *((u16 *)(skb->data + i)) = tmp; + tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA); + *((u16 *)(skb->data + i)) = cpu_to_le16(tmp); } if (len % 2) { tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA); skb->data[len - 1] = (tmp & 0x00FF); +/* The specs say the following is required, but + * it is wrong and corrupts the PLCP. If we don't do + * this, the PLCP seems to be correct. So ifdef it out for now. + */ +#if 0 if (rxflags2 & BCM43xx_RXHDR_FLAGS2_TYPE2FRAME) - skb->data[0x20] = (tmp & 0xFF00) >> 8; + skb->data[2] = (tmp & 0xFF00) >> 8; else - skb->data[0x1E] = (tmp & 0xFF00) >> 8; + skb->data[0] = (tmp & 0xFF00) >> 8; +#endif } + skb_trim(skb, len - IEEE80211_FCS_LEN); bcm43xx_rx(queue->bcm, skb, rxhdr); } + +void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue) +{ + bcm43xx_power_saving_ctl_bits(queue->bcm, -1, 1); + bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL, + bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL) + | BCM43xx_PIO_TXCTL_SUSPEND); +} + +void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue) +{ + bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL, + bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL) + & ~BCM43xx_PIO_TXCTL_SUSPEND); + bcm43xx_power_saving_ctl_bits(queue->bcm, -1, -1); + tasklet_schedule(&queue->txtask); +} diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_pio.h b/drivers/net/wireless/bcm43xx/bcm43xx_pio.h index 970627bc1769..dfc78209e3a3 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_pio.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_pio.h @@ -14,8 +14,8 @@ #define BCM43xx_PIO_RXCTL 0x08 #define BCM43xx_PIO_RXDATA 0x0A -#define BCM43xx_PIO_TXCTL_WRITEHI (1 << 0) -#define BCM43xx_PIO_TXCTL_WRITELO (1 << 1) +#define BCM43xx_PIO_TXCTL_WRITELO (1 << 0) +#define BCM43xx_PIO_TXCTL_WRITEHI (1 << 1) #define BCM43xx_PIO_TXCTL_COMPLETE (1 << 2) #define BCM43xx_PIO_TXCTL_INIT (1 << 3) #define BCM43xx_PIO_TXCTL_SUSPEND (1 << 7) @@ -95,6 +95,7 @@ void bcm43xx_pio_write(struct bcm43xx_pioqueue *queue, u16 offset, u16 value) { bcm43xx_write16(queue->bcm, queue->mmio_base + offset, value); + mmiowb(); } @@ -107,6 +108,9 @@ void bcm43xx_pio_handle_xmitstatus(struct bcm43xx_private *bcm, struct bcm43xx_xmitstatus *status); void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue); +void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue); +void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue); + #else /* CONFIG_BCM43XX_PIO */ static inline @@ -133,6 +137,14 @@ static inline void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue) { } +static inline +void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue) +{ +} +static inline +void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue) +{ +} #endif /* CONFIG_BCM43XX_PIO */ #endif /* BCM43xx_PIO_H_ */ From d8fe3f19203b1f5070358aaa292d33295258b448 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Mon, 24 Apr 2006 13:48:51 -0700 Subject: [PATCH 068/160] [SPARC]: __NR_sys removal __NR_sys_sync_file_range part was lost somewhere... [glibc is already checking __NR_sync_file_range] Signed-off-by: OGAWA Hirofumi Signed-off-by: David S. Miller --- include/asm-sparc/unistd.h | 2 +- include/asm-sparc64/unistd.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h index 45feff893b8e..32a48f623e2b 100644 --- a/include/asm-sparc/unistd.h +++ b/include/asm-sparc/unistd.h @@ -271,7 +271,7 @@ #define __NR_getsid 252 #define __NR_fdatasync 253 #define __NR_nfsservctl 254 -#define __NR_sys_sync_file_range 255 +#define __NR_sync_file_range 255 #define __NR_clock_settime 256 #define __NR_clock_gettime 257 #define __NR_clock_getres 258 diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h index 597f6923a46e..ca80e8aca128 100644 --- a/include/asm-sparc64/unistd.h +++ b/include/asm-sparc64/unistd.h @@ -273,7 +273,7 @@ #define __NR_getsid 252 #define __NR_fdatasync 253 #define __NR_nfsservctl 254 -#define __NR_sys_sync_file_range 255 +#define __NR_sync_file_range 255 #define __NR_clock_settime 256 #define __NR_clock_gettime 257 #define __NR_clock_getres 258 From e1bbdebdba615ddd957de81103aa2f7fa0581952 Mon Sep 17 00:00:00 2001 From: Yasuyuki Kozakai Date: Mon, 24 Apr 2006 17:15:17 -0700 Subject: [PATCH 069/160] [NETFILTER]: nf_conntrack: Fix module refcount dropping too far If nf_ct_l3proto_find_get() fails to get the refcount of nf_ct_l3proto_generic, nf_ct_l3proto_put() will drop the refcount too far. This gets rid of '.me = THIS_MODULE' of nf_ct_l3proto_generic so that nf_ct_l3proto_find_get() doesn't try to get refcount of it. It's OK because its symbol is usable until nf_conntrack.ko is unloaded. This also kills unnecessary NULL pointer check as well. __nf_ct_proto_find() allways returns non-NULL pointer. Signed-off-by: Yasuyuki Kozakai Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_core.c | 12 ++++-------- net/netfilter/nf_conntrack_l3proto_generic.c | 1 - 2 files changed, 4 insertions(+), 9 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index e581190fb6c3..e3022226a408 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -208,10 +208,8 @@ nf_ct_proto_find_get(u_int16_t l3proto, u_int8_t protocol) preempt_disable(); p = __nf_ct_proto_find(l3proto, protocol); - if (p) { - if (!try_module_get(p->me)) - p = &nf_conntrack_generic_protocol; - } + if (!try_module_get(p->me)) + p = &nf_conntrack_generic_protocol; preempt_enable(); return p; @@ -229,10 +227,8 @@ nf_ct_l3proto_find_get(u_int16_t l3proto) preempt_disable(); p = __nf_ct_l3proto_find(l3proto); - if (p) { - if (!try_module_get(p->me)) - p = &nf_conntrack_generic_l3proto; - } + if (!try_module_get(p->me)) + p = &nf_conntrack_generic_l3proto; preempt_enable(); return p; diff --git a/net/netfilter/nf_conntrack_l3proto_generic.c b/net/netfilter/nf_conntrack_l3proto_generic.c index 7de4f06c63c5..3fc58e454d4e 100644 --- a/net/netfilter/nf_conntrack_l3proto_generic.c +++ b/net/netfilter/nf_conntrack_l3proto_generic.c @@ -94,5 +94,4 @@ struct nf_conntrack_l3proto nf_conntrack_generic_l3proto = { .print_conntrack = generic_print_conntrack, .prepare = generic_prepare, .get_features = generic_get_features, - .me = THIS_MODULE, }; From 44adf28f4a27df626d50e54c8d0669df2dd1aa89 Mon Sep 17 00:00:00 2001 From: Thomas Voegtle Date: Mon, 24 Apr 2006 17:15:54 -0700 Subject: [PATCH 070/160] [NETFILTER]: ULOG target is not obsolete The backend part is obsoleted, but the target itself is still needed. Signed-off-by: Thomas Voegtle Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv4/netfilter/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index c60fd5c4ea1e..3d560dec63ab 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -345,7 +345,7 @@ config IP_NF_TARGET_LOG To compile it as a module, choose M here. If unsure, say N. config IP_NF_TARGET_ULOG - tristate "ULOG target support (OBSOLETE)" + tristate "ULOG target support" depends on IP_NF_IPTABLES ---help--- From 55fe5866366ae42f259f27ae5962eb267d9ce172 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 24 Apr 2006 17:16:28 -0700 Subject: [PATCH 071/160] [NETFILTER]: Fix compat_xt_counters alignment for non-x86 Some (?) non-x86 architectures require 8byte alignment for u_int64_t even when compiled for 32bit, using u_int32_t in compat_xt_counters breaks on these architectures, use u_int64_t for everything but x86. Reported by Andreas Schwab . Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter/x_tables.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index f6bdef82a322..38701454e197 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -361,7 +361,11 @@ struct compat_xt_entry_target struct compat_xt_counters { +#if defined(CONFIG_X86_64) || defined(CONFIG_IA64) u_int32_t cnt[4]; +#else + u_int64_t cnt[2]; +#endif }; struct compat_xt_counters_info From 2c16b774c7a9b1684b0ff10121915903e9f0cf6c Mon Sep 17 00:00:00 2001 From: Yasuyuki Kozakai Date: Mon, 24 Apr 2006 17:16:59 -0700 Subject: [PATCH 072/160] [NETFILTER]: nf_conntrack: kill unused callback init_conntrack Signed-off-by: Yasuyuki Kozakai Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_core.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index e3022226a408..f9b83f91371a 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -178,9 +178,6 @@ static struct { /* allocated slab cache + modules which uses this slab cache */ int use; - /* Initialization */ - int (*init_conntrack)(struct nf_conn *, u_int32_t); - } nf_ct_cache[NF_CT_F_NUM]; /* protect members of nf_ct_cache except of "use" */ From e4a79ef811505a8bf8d8edfda8602e23cb2fbdb0 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 24 Apr 2006 17:17:49 -0700 Subject: [PATCH 073/160] [NETFILTER]: ip6_tables: remove broken comefrom debugging The introduction of x_tables broke comefrom debugging, remove it from ip6_tables as well (ip_tables already got removed). Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv6/netfilter/ip6_tables.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index 642b4b11464f..0a673038344f 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -288,19 +288,6 @@ ip6t_do_table(struct sk_buff **pskb, table_base = (void *)private->entries[smp_processor_id()]; e = get_entry(table_base, private->hook_entry[hook]); -#ifdef CONFIG_NETFILTER_DEBUG - /* Check noone else using our table */ - if (((struct ip6t_entry *)table_base)->comefrom != 0xdead57ac - && ((struct ip6t_entry *)table_base)->comefrom != 0xeeeeeeec) { - printk("ASSERT: CPU #%u, %s comefrom(%p) = %X\n", - smp_processor_id(), - table->name, - &((struct ip6t_entry *)table_base)->comefrom, - ((struct ip6t_entry *)table_base)->comefrom); - } - ((struct ip6t_entry *)table_base)->comefrom = 0x57acc001; -#endif - /* For return from builtin chain */ back = get_entry(table_base, private->underflow[hook]); From 91536b7ae67710ca888e03ea82c60f0ac073a015 Mon Sep 17 00:00:00 2001 From: Dmitry Mishin Date: Mon, 24 Apr 2006 17:18:25 -0700 Subject: [PATCH 074/160] [NETFILTER]: x_tables: move table->lock initialization xt_table->lock should be initialized before xt_replace_table() call, which uses it. This patch removes strict requirement that table should define lock before registering. Signed-off-by: Dmitry Mishin Signed-off-by: Kirill Korotaev Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/x_tables.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c index 00cf0a4f4d92..17abf60f9570 100644 --- a/net/netfilter/x_tables.c +++ b/net/netfilter/x_tables.c @@ -529,6 +529,7 @@ int xt_register_table(struct xt_table *table, /* Simplifies replace_table code. */ table->private = bootstrap; + rwlock_init(&table->lock); if (!xt_replace_table(table, 0, newinfo, &ret)) goto unlock; @@ -538,7 +539,6 @@ int xt_register_table(struct xt_table *table, /* save number of initial entries */ private->initial_entries = private->number; - rwlock_init(&table->lock); list_prepend(&xt[table->af].tables, table); ret = 0; From 18118cdbfd1f855e09ee511d764d6c9df3d4f952 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 24 Apr 2006 17:18:59 -0700 Subject: [PATCH 075/160] [NETFILTER]: ipt action: use xt_check_target for basic verification The targets don't do the basic verification themselves anymore so the ipt action needs to take care of it. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/sched/act_ipt.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/sched/act_ipt.c b/net/sched/act_ipt.c index 6056d20ef429..37640c6fc014 100644 --- a/net/sched/act_ipt.c +++ b/net/sched/act_ipt.c @@ -69,6 +69,11 @@ ipt_init_target(struct ipt_entry_target *t, char *table, unsigned int hook) DPRINTK("ipt_init_target: found %s\n", target->name); t->u.kernel.target = target; + ret = xt_check_target(target, AF_INET, t->u.target_size - sizeof(*t), + table, hook, 0, 0); + if (ret) + return ret; + if (t->u.kernel.target->checkentry && !t->u.kernel.target->checkentry(table, NULL, t->u.kernel.target, t->data, From 4d5c34ec7b007cfb0771a36996b009f194acbb2f Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Tue, 25 Apr 2006 13:45:19 +0400 Subject: [PATCH 076/160] [PATCH] Alpha: strncpy() fix As it turned out after recent SCSI changes, strncpy() was broken - it mixed up the return values from __stxncpy() in registers $24 and $27. Thanks to Mathieu Chouquet-Stringer for tracking down the problem and providing an excellent test case. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds --- arch/alpha/lib/strncpy.S | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/alpha/lib/strncpy.S b/arch/alpha/lib/strncpy.S index 338551c7113c..bbdef1be5f95 100644 --- a/arch/alpha/lib/strncpy.S +++ b/arch/alpha/lib/strncpy.S @@ -43,8 +43,8 @@ strncpy: .align 4 $multiword: - subq $24, 1, $2 # clear the final bits in the prev word - or $2, $24, $2 + subq $27, 1, $2 # clear the final bits in the prev word + or $2, $27, $2 zapnot $1, $2, $1 subq $18, 1, $18 @@ -70,8 +70,8 @@ $multiword: bne $18, 0b 1: ldq_u $1, 0($16) # clear the leading bits in the final word - subq $27, 1, $2 - or $2, $27, $2 + subq $24, 1, $2 + or $2, $24, $2 zap $1, $2, $1 stq_u $1, 0($16) From c7fd84424f919740880d989cb0459c332da96013 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Tue, 25 Apr 2006 20:36:04 +0100 Subject: [PATCH 077/160] [ARM] 3484/1: Correct AEABI CFLAGS for correct enum handling Patch from Richard Purdie The AAPCS says that enums can be variably sized depending on the range of valid values. This is not the accepted behaviour under linux so for compatibility gcc has an aapcs-linux target, the main difference being that enums are always of type int. Change the ARM Makefile to use this target. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 95a96275f88a..6f8e84c1c1f2 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -66,7 +66,7 @@ tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) - tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) ifeq ($(CONFIG_AEABI),y) -CFLAGS_ABI :=-mabi=aapcs -mno-thumb-interwork +CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork else CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) endif From 928bd1b4709045355fad8bf858904884c0a1e87f Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 25 Apr 2006 20:41:27 +0100 Subject: [PATCH 078/160] [ARM] vfp: fix leak of VFP_NAN_FLAG into FPSCR The VFP code can leak VFP_NAN_FLAG into the FPSCR. It doesn't correspond to any real FPSCR bit (and overlaps one of the exception flags). Bug report from Daniel Jacobowitz Signed-off-by: Russell King --- arch/arm/vfp/vfpdouble.c | 2 +- arch/arm/vfp/vfpmodule.c | 2 +- arch/arm/vfp/vfpsingle.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index febd115dba28..009038c8113e 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -197,7 +197,7 @@ u32 vfp_double_normaliseround(int dd, struct vfp_double *vd, u32 fpscr, u32 exce dd, d, exceptions); vfp_put_double(dd, d); } - return exceptions & ~VFP_NAN_FLAG; + return exceptions; } /* diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 22f3da4e0829..37ff8145b5b5 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -180,7 +180,7 @@ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs) * emulate it. */ } - return exceptions; + return exceptions & ~VFP_NAN_FLAG; } /* diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index 4ac27f193934..dae2c2f46052 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -203,7 +203,7 @@ u32 vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exce vfp_put_float(sd, d); } - return exceptions & ~VFP_NAN_FLAG; + return exceptions; } /* From bcb49197ed9a2e8a0a8d990723dccfccffa7566f Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Tue, 25 Apr 2006 22:50:04 -0700 Subject: [PATCH 079/160] e1000: Update truesize with the length of the packet for packet split Update skb with the real packet size. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: John Ronciak --- drivers/net/e1000/e1000_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index add8dc4aa7b0..c99e87838f92 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3768,6 +3768,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, ps_page->ps_page[j] = NULL; skb->len += length; skb->data_len += length; + skb->truesize += length; } copydone: From ba5f5d90c45a30e4e9a1bd136acf1b3973c905c8 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 25 Apr 2006 15:33:34 +0200 Subject: [PATCH 080/160] [PATCH] splice: fix min() warning Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- fs/splice.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/splice.c b/fs/splice.c index 0559e7577a04..4aa67254740f 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -283,7 +283,7 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, /* * this_len is the max we'll use from this page */ - this_len = min(len, PAGE_CACHE_SIZE - loff); + this_len = min_t(unsigned long, len, PAGE_CACHE_SIZE - loff); find_page: /* * lookup the page for this index From 016b661e2f717168e600f3c85f29e1a49f88e004 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 25 Apr 2006 15:42:00 +0200 Subject: [PATCH 081/160] [PATCH] splice: fix offset problems Make the move_from_pipe() actors return number of bytes processed, then move_from_pipe() can decide more cleverly when to move on to the next buffer. This fixes problems with pipe offset and differing file offset. Signed-off-by: Jens Axboe --- fs/splice.c | 46 +++++++++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 19 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index 4aa67254740f..8c6030c762e2 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -439,14 +439,13 @@ EXPORT_SYMBOL(generic_file_splice_read); /* * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos' - * using sendpage(). + * using sendpage(). Return the number of bytes sent. */ static int pipe_to_sendpage(struct pipe_inode_info *info, struct pipe_buffer *buf, struct splice_desc *sd) { struct file *file = sd->file; loff_t pos = sd->pos; - unsigned int offset; ssize_t ret; void *ptr; int more; @@ -461,16 +460,13 @@ static int pipe_to_sendpage(struct pipe_inode_info *info, if (IS_ERR(ptr)) return PTR_ERR(ptr); - offset = pos & ~PAGE_CACHE_MASK; more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len; - ret = file->f_op->sendpage(file, buf->page, offset, sd->len, &pos,more); + ret = file->f_op->sendpage(file, buf->page, buf->offset, sd->len, + &pos, more); buf->ops->unmap(info, buf); - if (ret == sd->len) - return 0; - - return -EIO; + return ret; } /* @@ -499,7 +495,7 @@ static int pipe_to_file(struct pipe_inode_info *info, struct pipe_buffer *buf, struct file *file = sd->file; struct address_space *mapping = file->f_mapping; gfp_t gfp_mask = mapping_gfp_mask(mapping); - unsigned int offset; + unsigned int offset, this_len; struct page *page; pgoff_t index; char *src; @@ -515,6 +511,10 @@ static int pipe_to_file(struct pipe_inode_info *info, struct pipe_buffer *buf, index = sd->pos >> PAGE_CACHE_SHIFT; offset = sd->pos & ~PAGE_CACHE_MASK; + this_len = sd->len; + if (this_len + offset > PAGE_CACHE_SIZE) + this_len = PAGE_CACHE_SIZE - offset; + /* * Reuse buf page, if SPLICE_F_MOVE is set. */ @@ -558,7 +558,7 @@ find_page: * the full page. */ if (!PageUptodate(page)) { - if (sd->len < PAGE_CACHE_SIZE) { + if (this_len < PAGE_CACHE_SIZE) { ret = mapping->a_ops->readpage(file, page); if (unlikely(ret)) goto out; @@ -582,7 +582,7 @@ find_page: } } - ret = mapping->a_ops->prepare_write(file, page, 0, sd->len); + ret = mapping->a_ops->prepare_write(file, page, offset, offset+this_len); if (ret == AOP_TRUNCATED_PAGE) { page_cache_release(page); goto find_page; @@ -592,18 +592,22 @@ find_page: if (!(buf->flags & PIPE_BUF_FLAG_STOLEN)) { char *dst = kmap_atomic(page, KM_USER0); - memcpy(dst + offset, src + buf->offset, sd->len); + memcpy(dst + offset, src + buf->offset, this_len); flush_dcache_page(page); kunmap_atomic(dst, KM_USER0); } - ret = mapping->a_ops->commit_write(file, page, 0, sd->len); + ret = mapping->a_ops->commit_write(file, page, offset, offset+this_len); if (ret == AOP_TRUNCATED_PAGE) { page_cache_release(page); goto find_page; } else if (ret) goto out; + /* + * Return the number of bytes written. + */ + ret = this_len; mark_page_accessed(page); balance_dirty_pages_ratelimited(mapping); out: @@ -652,16 +656,22 @@ static ssize_t move_from_pipe(struct pipe_inode_info *pipe, struct file *out, sd.len = sd.total_len; err = actor(pipe, buf, &sd); - if (err) { + if (err <= 0) { if (!ret && err != -ENODATA) ret = err; break; } - ret += sd.len; - buf->offset += sd.len; - buf->len -= sd.len; + ret += err; + buf->offset += err; + buf->len -= err; + + sd.len -= err; + sd.pos += err; + sd.total_len -= err; + if (sd.len) + continue; if (!buf->len) { buf->ops = NULL; @@ -672,8 +682,6 @@ static ssize_t move_from_pipe(struct pipe_inode_info *pipe, struct file *out, do_wakeup = 1; } - sd.pos += sd.len; - sd.total_len -= sd.len; if (!sd.total_len) break; } From 5a5fb1ea74d8b82ca1461b885a1334fb21e037be Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 26 Apr 2006 10:48:55 +0200 Subject: [PATCH 082/160] Revert "[fuse] fix deadlock between fuse_put_super() and request_end()" This reverts 73ce8355c243a434524a34c05cc417dd0467996e commit. It was wrong, because it didn't take into account the requirement, that iput() for background requests must be performed synchronously with ->put_super(), otherwise active inodes may remain after unmount. The right solution is to keep the sbput_sem and perform iput() within the locked region, but move fput() outside sbput_sem. Signed-off-by: Miklos Szeredi --- fs/fuse/dev.c | 28 ++++++++++++---------------- fs/fuse/fuse_i.h | 12 +++++++++--- fs/fuse/inode.c | 27 ++++++++++----------------- 3 files changed, 31 insertions(+), 36 deletions(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index cc750c68fe70..4967bd40b953 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -128,14 +128,20 @@ void fuse_put_request(struct fuse_conn *fc, struct fuse_req *req) } } -void fuse_remove_background(struct fuse_conn *fc, struct fuse_req *req) +void fuse_release_background(struct fuse_conn *fc, struct fuse_req *req) { - list_del_init(&req->bg_entry); + iput(req->inode); + iput(req->inode2); + if (req->file) + fput(req->file); + spin_lock(&fc->lock); + list_del(&req->bg_entry); if (fc->num_background == FUSE_MAX_BACKGROUND) { fc->blocked = 0; wake_up_all(&fc->blocked_waitq); } fc->num_background--; + spin_unlock(&fc->lock); } /* @@ -165,27 +171,17 @@ static void request_end(struct fuse_conn *fc, struct fuse_req *req) wake_up(&req->waitq); fuse_put_request(fc, req); } else { - struct inode *inode = req->inode; - struct inode *inode2 = req->inode2; - struct file *file = req->file; void (*end) (struct fuse_conn *, struct fuse_req *) = req->end; req->end = NULL; - req->inode = NULL; - req->inode2 = NULL; - req->file = NULL; - if (!list_empty(&req->bg_entry)) - fuse_remove_background(fc, req); spin_unlock(&fc->lock); - + down_read(&fc->sbput_sem); + if (fc->mounted) + fuse_release_background(fc, req); + up_read(&fc->sbput_sem); if (end) end(fc, req); else fuse_put_request(fc, req); - - if (file) - fput(file); - iput(inode); - iput(inode2); } } diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index 59661c481d9d..0474202cb5dc 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -258,9 +258,15 @@ struct fuse_conn { /** waitq for blocked connection */ wait_queue_head_t blocked_waitq; + /** RW semaphore for exclusion with fuse_put_super() */ + struct rw_semaphore sbput_sem; + /** The next unique request id */ u64 reqctr; + /** Mount is active */ + unsigned mounted; + /** Connection established, cleared on umount, connection abort and device release */ unsigned connected; @@ -471,11 +477,11 @@ void request_send_noreply(struct fuse_conn *fc, struct fuse_req *req); void request_send_background(struct fuse_conn *fc, struct fuse_req *req); /** - * Remove request from the the background list + * Release inodes and file associated with background request */ -void fuse_remove_background(struct fuse_conn *fc, struct fuse_req *req); +void fuse_release_background(struct fuse_conn *fc, struct fuse_req *req); -/** Abort all requests */ +/* Abort all requests */ void fuse_abort_conn(struct fuse_conn *fc); /** diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 43a6fc0db8a7..fd34037b0588 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -204,26 +204,17 @@ static void fuse_put_super(struct super_block *sb) { struct fuse_conn *fc = get_fuse_conn_super(sb); + down_write(&fc->sbput_sem); + while (!list_empty(&fc->background)) + fuse_release_background(fc, + list_entry(fc->background.next, + struct fuse_req, bg_entry)); + spin_lock(&fc->lock); + fc->mounted = 0; fc->connected = 0; - while (!list_empty(&fc->background)) { - struct fuse_req *req = list_entry(fc->background.next, - struct fuse_req, bg_entry); - struct inode *inode = req->inode; - struct inode *inode2 = req->inode2; - - /* File would hold a reference to vfsmount */ - BUG_ON(req->file); - req->inode = NULL; - req->inode2 = NULL; - fuse_remove_background(fc, req); - - spin_unlock(&fc->lock); - iput(inode); - iput(inode2); - spin_lock(&fc->lock); - } spin_unlock(&fc->lock); + up_write(&fc->sbput_sem); /* Flush all readers on this fs */ kill_fasync(&fc->fasync, SIGIO, POLL_IN); wake_up_all(&fc->waitq); @@ -395,6 +386,7 @@ static struct fuse_conn *new_conn(void) INIT_LIST_HEAD(&fc->processing); INIT_LIST_HEAD(&fc->io); INIT_LIST_HEAD(&fc->background); + init_rwsem(&fc->sbput_sem); kobj_set_kset_s(fc, connections_subsys); kobject_init(&fc->kobj); atomic_set(&fc->num_waiting, 0); @@ -549,6 +541,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) goto err_free_req; sb->s_root = root_dentry; + fc->mounted = 1; fc->connected = 1; kobject_get(&fc->kobj); file->private_data = fc; From 6dbbcb120570d747b00783820ee02d1e1bcf63de Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 26 Apr 2006 10:49:06 +0200 Subject: [PATCH 083/160] [fuse] fix deadlock between fuse_put_super() and request_end(), try #2 A deadlock was possible, when the last reference to the superblock was held due to a background request containing a file reference. Releasing the file would release the vfsmount which in turn would release the superblock. Since sbput_sem is held during the fput() and fuse_put_super() tries to acquire this same semaphore, a deadlock results. The solution is to move the fput() outside the region protected by sbput_sem. Signed-off-by: Miklos Szeredi --- fs/fuse/dev.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 4967bd40b953..104a62dadb94 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -128,12 +128,16 @@ void fuse_put_request(struct fuse_conn *fc, struct fuse_req *req) } } +/* + * Called with sbput_sem held for read (request_end) or write + * (fuse_put_super). By the time fuse_put_super() is finished, all + * inodes belonging to background requests must be released, so the + * iputs have to be done within the locked region. + */ void fuse_release_background(struct fuse_conn *fc, struct fuse_req *req) { iput(req->inode); iput(req->inode2); - if (req->file) - fput(req->file); spin_lock(&fc->lock); list_del(&req->bg_entry); if (fc->num_background == FUSE_MAX_BACKGROUND) { @@ -178,6 +182,11 @@ static void request_end(struct fuse_conn *fc, struct fuse_req *req) if (fc->mounted) fuse_release_background(fc, req); up_read(&fc->sbput_sem); + + /* fput must go outside sbput_sem, otherwise it can deadlock */ + if (req->file) + fput(req->file); + if (end) end(fc, req); else From 8aa09a50b5d9dbdf627f79e19d72d82994348089 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 26 Apr 2006 10:49:16 +0200 Subject: [PATCH 084/160] [fuse] fix race between checking and setting file->private_data BKL does not protect against races if the task may sleep between checking and setting a value. So move checking of file->private_data near to setting it in fuse_fill_super(). Found by Al Viro. Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index fd34037b0588..7627022446b2 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -500,11 +500,6 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) if (file->f_op != &fuse_dev_operations) return -EINVAL; - /* Setting file->private_data can't race with other mount() - instances, since BKL is held for ->get_sb() */ - if (file->private_data) - return -EINVAL; - fc = new_conn(); if (!fc) return -ENOMEM; @@ -540,6 +535,12 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) if (err) goto err_free_req; + /* Setting file->private_data can't race with other mount() + instances, since BKL is held for ->get_sb() */ + err = -EINVAL; + if (file->private_data) + goto err_kobject_del; + sb->s_root = root_dentry; fc->mounted = 1; fc->connected = 1; @@ -556,6 +557,8 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) return 0; + err_kobject_del: + kobject_del(&fc->kobj); err_free_req: fuse_request_free(init_req); err_put_root: From c86d90df2676d9d212c0ab1f3c64e0abdf5b4c09 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 26 Apr 2006 10:49:26 +0200 Subject: [PATCH 085/160] [doc] add paragraph about 'fs' subsystem to sysfs.txt Signed-off-by: Miklos Szeredi --- Documentation/filesystems/sysfs.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index c8bce82ddcac..89b1d196ca80 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -246,6 +246,7 @@ class/ devices/ firmware/ net/ +fs/ devices/ contains a filesystem representation of the device tree. It maps directly to the internal kernel device tree, which is a hierarchy of @@ -264,6 +265,10 @@ drivers/ contains a directory for each device driver that is loaded for devices on that particular bus (this assumes that drivers do not span multiple bus types). +fs/ contains a directory for some filesystems. Currently each +filesystem wanting to export attributes must create its own hierarchy +below fs/ (see ./fuse.txt for an example). + More information can driver-model specific features can be found in Documentation/driver-model/. From 912d35f86781e64d73be1ef358f703c08905ac37 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 26 Apr 2006 10:59:21 +0200 Subject: [PATCH 086/160] [PATCH] Add support for the sys_vmsplice syscall sys_splice() moves data to/from pipes with a file input/output. sys_vmsplice() moves data to a pipe, with the input being a user address range instead. This uses an approach suggested by Linus, where we can hold partial ranges inside the pages[] map. Hopefully this will be useful for network receive support as well. Signed-off-by: Jens Axboe --- arch/ia64/kernel/entry.S | 1 + arch/powerpc/kernel/systbl.S | 1 + arch/powerpc/platforms/cell/spu_callbacks.c | 1 + fs/splice.c | 292 +++++++++++++++++--- include/asm-i386/unistd.h | 3 +- include/asm-ia64/unistd.h | 3 +- include/asm-powerpc/unistd.h | 3 +- include/asm-x86_64/unistd.h | 4 +- include/linux/syscalls.h | 3 + 9 files changed, 268 insertions(+), 43 deletions(-) diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index e30798811216..bcb80ca5cf40 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1610,5 +1610,6 @@ sys_call_table: data8 sys_get_robust_list data8 sys_sync_file_range // 1300 data8 sys_tee + data8 sys_vmsplice .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S index 8d1522690501..0b98eea73c5e 100644 --- a/arch/powerpc/kernel/systbl.S +++ b/arch/powerpc/kernel/systbl.S @@ -324,6 +324,7 @@ COMPAT_SYS(ppoll) SYSCALL(unshare) SYSCALL(splice) SYSCALL(tee) +SYSCALL(vmsplice) /* * please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c index deb3afb94484..b283380a2a18 100644 --- a/arch/powerpc/platforms/cell/spu_callbacks.c +++ b/arch/powerpc/platforms/cell/spu_callbacks.c @@ -318,6 +318,7 @@ void *spu_syscall_table[] = { [__NR_unshare] sys_unshare, [__NR_splice] sys_splice, [__NR_tee] sys_tee, + [__NR_vmsplice] sys_vmsplice, }; long spu_sys_callback(struct spu_syscall_block *s) diff --git a/fs/splice.c b/fs/splice.c index 8c6030c762e2..0b2c1f060cae 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -27,6 +27,7 @@ #include #include #include +#include /* * Passed to the actors @@ -38,6 +39,22 @@ struct splice_desc { loff_t pos; /* file position */ }; +struct partial_page { + unsigned int offset; + unsigned int len; +}; + +/* + * Passed to move_to_pipe + */ +struct splice_pipe_desc { + struct page **pages; /* page map */ + struct partial_page *partial; /* pages[] may not be contig */ + int nr_pages; /* number of pages in map */ + unsigned int flags; /* splice flags */ + struct pipe_buf_operations *ops;/* ops associated with output pipe */ +}; + /* * Attempt to steal a page from a pipe buffer. This should perhaps go into * a vm helper function, it's already simplified quite a bit by the @@ -128,6 +145,19 @@ static void page_cache_pipe_buf_unmap(struct pipe_inode_info *info, kunmap(buf->page); } +static void *user_page_pipe_buf_map(struct file *file, + struct pipe_inode_info *pipe, + struct pipe_buffer *buf) +{ + return kmap(buf->page); +} + +static void user_page_pipe_buf_unmap(struct pipe_inode_info *pipe, + struct pipe_buffer *buf) +{ + kunmap(buf->page); +} + static void page_cache_pipe_buf_get(struct pipe_inode_info *info, struct pipe_buffer *buf) { @@ -143,19 +173,33 @@ static struct pipe_buf_operations page_cache_pipe_buf_ops = { .get = page_cache_pipe_buf_get, }; +static int user_page_pipe_buf_steal(struct pipe_inode_info *pipe, + struct pipe_buffer *buf) +{ + return 1; +} + +static struct pipe_buf_operations user_page_pipe_buf_ops = { + .can_merge = 0, + .map = user_page_pipe_buf_map, + .unmap = user_page_pipe_buf_unmap, + .release = page_cache_pipe_buf_release, + .steal = user_page_pipe_buf_steal, + .get = page_cache_pipe_buf_get, +}; + /* * Pipe output worker. This sets up our pipe format with the page cache * pipe buffer operations. Otherwise very similar to the regular pipe_writev(). */ -static ssize_t move_to_pipe(struct pipe_inode_info *pipe, struct page **pages, - int nr_pages, unsigned long len, - unsigned int offset, unsigned int flags) +static ssize_t move_to_pipe(struct pipe_inode_info *pipe, + struct splice_pipe_desc *spd) { - int ret, do_wakeup, i; + int ret, do_wakeup, page_nr; ret = 0; do_wakeup = 0; - i = 0; + page_nr = 0; if (pipe->inode) mutex_lock(&pipe->inode->i_mutex); @@ -171,27 +215,19 @@ static ssize_t move_to_pipe(struct pipe_inode_info *pipe, struct page **pages, if (pipe->nrbufs < PIPE_BUFFERS) { int newbuf = (pipe->curbuf + pipe->nrbufs) & (PIPE_BUFFERS - 1); struct pipe_buffer *buf = pipe->bufs + newbuf; - struct page *page = pages[i++]; - unsigned long this_len; - this_len = PAGE_CACHE_SIZE - offset; - if (this_len > len) - this_len = len; - - buf->page = page; - buf->offset = offset; - buf->len = this_len; - buf->ops = &page_cache_pipe_buf_ops; + buf->page = spd->pages[page_nr]; + buf->offset = spd->partial[page_nr].offset; + buf->len = spd->partial[page_nr].len; + buf->ops = spd->ops; pipe->nrbufs++; + page_nr++; + ret += buf->len; + if (pipe->inode) do_wakeup = 1; - ret += this_len; - len -= this_len; - offset = 0; - if (!--nr_pages) - break; - if (!len) + if (!--spd->nr_pages) break; if (pipe->nrbufs < PIPE_BUFFERS) continue; @@ -199,7 +235,7 @@ static ssize_t move_to_pipe(struct pipe_inode_info *pipe, struct page **pages, break; } - if (flags & SPLICE_F_NONBLOCK) { + if (spd->flags & SPLICE_F_NONBLOCK) { if (!ret) ret = -EAGAIN; break; @@ -234,8 +270,8 @@ static ssize_t move_to_pipe(struct pipe_inode_info *pipe, struct page **pages, kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); } - while (i < nr_pages) - page_cache_release(pages[i++]); + while (page_nr < spd->nr_pages) + page_cache_release(spd->pages[page_nr++]); return ret; } @@ -246,17 +282,24 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, unsigned int flags) { struct address_space *mapping = in->f_mapping; - unsigned int loff, offset, nr_pages; + unsigned int loff, nr_pages; struct page *pages[PIPE_BUFFERS]; + struct partial_page partial[PIPE_BUFFERS]; struct page *page; pgoff_t index, end_index; loff_t isize; - size_t bytes; - int i, error; + size_t total_len; + int error; + struct splice_pipe_desc spd = { + .pages = pages, + .partial = partial, + .flags = flags, + .ops = &page_cache_pipe_buf_ops, + }; index = *ppos >> PAGE_CACHE_SHIFT; - loff = offset = *ppos & ~PAGE_CACHE_MASK; - nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; + loff = *ppos & ~PAGE_CACHE_MASK; + nr_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; if (nr_pages > PIPE_BUFFERS) nr_pages = PIPE_BUFFERS; @@ -266,15 +309,15 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, * read-ahead if this is a non-zero offset (we are likely doing small * chunk splice and the page is already there) for a single page. */ - if (!offset || nr_pages > 1) - do_page_cache_readahead(mapping, in, index, nr_pages); + if (!loff || spd.nr_pages > 1) + do_page_cache_readahead(mapping, in, index, spd.nr_pages); /* * Now fill in the holes: */ error = 0; - bytes = 0; - for (i = 0; i < nr_pages; i++, index++) { + total_len = 0; + for (spd.nr_pages = 0; spd.nr_pages < nr_pages; spd.nr_pages++, index++) { unsigned int this_len; if (!len) @@ -367,26 +410,29 @@ readpage: */ if (end_index == index) { loff = PAGE_CACHE_SIZE - (isize & ~PAGE_CACHE_MASK); - if (bytes + loff > isize) { + if (total_len + loff > isize) { page_cache_release(page); break; } /* * force quit after adding this page */ - nr_pages = i; + nr_pages = spd.nr_pages; this_len = min(this_len, loff); + loff = 0; } } fill_it: - pages[i] = page; - bytes += this_len; + pages[spd.nr_pages] = page; + partial[spd.nr_pages].offset = loff; + partial[spd.nr_pages].len = this_len; len -= this_len; + total_len += this_len; loff = 0; } - if (i) - return move_to_pipe(pipe, pages, i, bytes, offset, flags); + if (spd.nr_pages) + return move_to_pipe(pipe, &spd); return error; } @@ -1018,6 +1064,174 @@ static long do_splice(struct file *in, loff_t __user *off_in, return -EINVAL; } +/* + * Map an iov into an array of pages and offset/length tupples. With the + * partial_page structure, we can map several non-contiguous ranges into + * our ones pages[] map instead of splitting that operation into pieces. + * Could easily be exported as a generic helper for other users, in which + * case one would probably want to add a 'max_nr_pages' parameter as well. + */ +static int get_iovec_page_array(const struct iovec __user *iov, + unsigned int nr_vecs, struct page **pages, + struct partial_page *partial) +{ + int buffers = 0, error = 0; + + /* + * It's ok to take the mmap_sem for reading, even + * across a "get_user()". + */ + down_read(¤t->mm->mmap_sem); + + while (nr_vecs) { + unsigned long off, npages; + void __user *base; + size_t len; + int i; + + /* + * Get user address base and length for this iovec. + */ + error = get_user(base, &iov->iov_base); + if (unlikely(error)) + break; + error = get_user(len, &iov->iov_len); + if (unlikely(error)) + break; + + /* + * Sanity check this iovec. 0 read succeeds. + */ + if (unlikely(!len)) + break; + error = -EFAULT; + if (unlikely(!base)) + break; + + /* + * Get this base offset and number of pages, then map + * in the user pages. + */ + off = (unsigned long) base & ~PAGE_MASK; + npages = (off + len + PAGE_SIZE - 1) >> PAGE_SHIFT; + if (npages > PIPE_BUFFERS - buffers) + npages = PIPE_BUFFERS - buffers; + + error = get_user_pages(current, current->mm, + (unsigned long) base, npages, 0, 0, + &pages[buffers], NULL); + + if (unlikely(error <= 0)) + break; + + /* + * Fill this contiguous range into the partial page map. + */ + for (i = 0; i < error; i++) { + const int plen = min_t(size_t, len, PAGE_SIZE) - off; + + partial[buffers].offset = off; + partial[buffers].len = plen; + + off = 0; + len -= plen; + buffers++; + } + + /* + * We didn't complete this iov, stop here since it probably + * means we have to move some of this into a pipe to + * be able to continue. + */ + if (len) + break; + + /* + * Don't continue if we mapped fewer pages than we asked for, + * or if we mapped the max number of pages that we have + * room for. + */ + if (error < npages || buffers == PIPE_BUFFERS) + break; + + nr_vecs--; + iov++; + } + + up_read(¤t->mm->mmap_sem); + + if (buffers) + return buffers; + + return error; +} + +/* + * vmsplice splices a user address range into a pipe. It can be thought of + * as splice-from-memory, where the regular splice is splice-from-file (or + * to file). In both cases the output is a pipe, naturally. + * + * Note that vmsplice only supports splicing _from_ user memory to a pipe, + * not the other way around. Splicing from user memory is a simple operation + * that can be supported without any funky alignment restrictions or nasty + * vm tricks. We simply map in the user memory and fill them into a pipe. + * The reverse isn't quite as easy, though. There are two possible solutions + * for that: + * + * - memcpy() the data internally, at which point we might as well just + * do a regular read() on the buffer anyway. + * - Lots of nasty vm tricks, that are neither fast nor flexible (it + * has restriction limitations on both ends of the pipe). + * + * Alas, it isn't here. + * + */ +static long do_vmsplice(struct file *file, const struct iovec __user *iov, + unsigned long nr_segs, unsigned int flags) +{ + struct pipe_inode_info *pipe = file->f_dentry->d_inode->i_pipe; + struct page *pages[PIPE_BUFFERS]; + struct partial_page partial[PIPE_BUFFERS]; + struct splice_pipe_desc spd = { + .pages = pages, + .partial = partial, + .flags = flags, + .ops = &user_page_pipe_buf_ops, + }; + + if (unlikely(!pipe)) + return -EBADF; + if (unlikely(nr_segs > UIO_MAXIOV)) + return -EINVAL; + else if (unlikely(!nr_segs)) + return 0; + + spd.nr_pages = get_iovec_page_array(iov, nr_segs, pages, partial); + if (spd.nr_pages <= 0) + return spd.nr_pages; + + return move_to_pipe(pipe, &spd); +} + +asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov, + unsigned long nr_segs, unsigned int flags) +{ + struct file *file; + long error; + int fput; + + error = -EBADF; + file = fget_light(fd, &fput); + if (file) { + if (file->f_mode & FMODE_WRITE) + error = do_vmsplice(file, iov, nr_segs, flags); + + fput_light(file, fput); + } + + return error; +} + asmlinkage long sys_splice(int fd_in, loff_t __user *off_in, int fd_out, loff_t __user *off_out, size_t len, unsigned int flags) diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h index d81d6cfc1bb4..eb4b152c82fc 100644 --- a/include/asm-i386/unistd.h +++ b/include/asm-i386/unistd.h @@ -321,8 +321,9 @@ #define __NR_splice 313 #define __NR_sync_file_range 314 #define __NR_tee 315 +#define __NR_vmsplice 316 -#define NR_syscalls 316 +#define NR_syscalls 317 /* * user-visible error numbers are in the range -1 - -128: see diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h index a40ebec6aeeb..7107763168bf 100644 --- a/include/asm-ia64/unistd.h +++ b/include/asm-ia64/unistd.h @@ -290,12 +290,13 @@ #define __NR_get_robust_list 1299 #define __NR_sync_file_range 1300 #define __NR_tee 1301 +#define __NR_vmsplice 1302 #ifdef __KERNEL__ #include -#define NR_syscalls 278 /* length of syscall table */ +#define NR_syscalls 279 /* length of syscall table */ #define __ARCH_WANT_SYS_RT_SIGACTION diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h index c612f1a62772..34325e292596 100644 --- a/include/asm-powerpc/unistd.h +++ b/include/asm-powerpc/unistd.h @@ -303,8 +303,9 @@ #define __NR_unshare 282 #define __NR_splice 283 #define __NR_tee 284 +#define __NR_vmsplice 285 -#define __NR_syscalls 285 +#define __NR_syscalls 286 #ifdef __KERNEL__ #define __NR__exit __NR_exit diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h index 98c36eae567c..feb77cb8c044 100644 --- a/include/asm-x86_64/unistd.h +++ b/include/asm-x86_64/unistd.h @@ -615,8 +615,10 @@ __SYSCALL(__NR_splice, sys_splice) __SYSCALL(__NR_tee, sys_tee) #define __NR_sync_file_range 277 __SYSCALL(__NR_sync_file_range, sys_sync_file_range) +#define __NR_vmsplice 278 +__SYSCALL(__NR_vmsplice, sys_vmsplice) -#define __NR_syscall_max __NR_sync_file_range +#define __NR_syscall_max __NR_vmsplice #ifndef __NO_STUBS diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index d3ebc0e68b2b..3996960fc565 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -574,6 +574,9 @@ asmlinkage long sys_splice(int fd_in, loff_t __user *off_in, int fd_out, loff_t __user *off_out, size_t len, unsigned int flags); +asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov, + unsigned long nr_segs, unsigned int flags); + asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags); asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes, From 85ca719e5756d79ea0f10c469e3762462ac45e22 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 26 Apr 2006 02:39:19 -0700 Subject: [PATCH 087/160] [BRIDGE]: allow full size vlan packets Need to allow for VLAN header when bridging. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_forward.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index 2d24fb400e0c..56f3aa47e758 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include "br_private.h" @@ -29,10 +30,15 @@ static inline int should_deliver(const struct net_bridge_port *p, return 1; } +static inline unsigned packet_length(const struct sk_buff *skb) +{ + return skb->len - (skb->protocol == htons(ETH_P_8021Q) ? VLAN_HLEN : 0); +} + int br_dev_queue_push_xmit(struct sk_buff *skb) { /* drop mtu oversized packets except tso */ - if (skb->len > skb->dev->mtu && !skb_shinfo(skb)->tso_size) + if (packet_length(skb) > skb->dev->mtu && !skb_shinfo(skb)->tso_size) kfree_skb(skb); else { #ifdef CONFIG_BRIDGE_NETFILTER From 734cbc363b159caee158d5a83408c72d98bcacf0 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 25 Apr 2006 10:58:50 -0700 Subject: [PATCH 088/160] [PATCH] sky2: reschedule if irq still pending This is a workaround for the case edge-triggered irq's. Several users seem to have broken configurations sharing edge-triggered irq's. To avoid losing IRQ's, reshedule if more work arrives. The changes to netdevice.h are to extract the part that puts device back in list into separate inline. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 20 ++++++++++++++++---- include/linux/netdevice.h | 18 ++++++++++-------- 2 files changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 67b0eab16589..618fde8622ca 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2093,6 +2093,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) int work_done = 0; u32 status = sky2_read32(hw, B0_Y2_SP_EISR); + restart_poll: if (unlikely(status & ~Y2_IS_STAT_BMU)) { if (status & Y2_IS_HW_ERR) sky2_hw_intr(hw); @@ -2123,7 +2124,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) } if (status & Y2_IS_STAT_BMU) { - work_done = sky2_status_intr(hw, work_limit); + work_done += sky2_status_intr(hw, work_limit - work_done); *budget -= work_done; dev0->quota -= work_done; @@ -2133,9 +2134,22 @@ static int sky2_poll(struct net_device *dev0, int *budget) sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); } - netif_rx_complete(dev0); + local_irq_disable(); + __netif_rx_complete(dev0); status = sky2_read32(hw, B0_Y2_SP_LISR); + + if (unlikely(status)) { + /* More work pending, try and keep going */ + if (__netif_rx_schedule_prep(dev0)) { + __netif_rx_reschedule(dev0, work_done); + status = sky2_read32(hw, B0_Y2_SP_EISR); + local_irq_enable(); + goto restart_poll; + } + } + + local_irq_enable(); return 0; } @@ -2153,8 +2167,6 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) prefetch(&hw->st_le[hw->st_idx]); if (likely(__netif_rx_schedule_prep(dev0))) __netif_rx_schedule(dev0); - else - printk(KERN_DEBUG PFX "irq race detected\n"); return IRQ_HANDLED; } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 40ccf8cc4239..01db7b88a2b1 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -829,19 +829,21 @@ static inline void netif_rx_schedule(struct net_device *dev) __netif_rx_schedule(dev); } -/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete(). - * Do not inline this? - */ + +static inline void __netif_rx_reschedule(struct net_device *dev, int undo) +{ + dev->quota += undo; + list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list); + __raise_softirq_irqoff(NET_RX_SOFTIRQ); +} + +/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete(). */ static inline int netif_rx_reschedule(struct net_device *dev, int undo) { if (netif_rx_schedule_prep(dev)) { unsigned long flags; - - dev->quota += undo; - local_irq_save(flags); - list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list); - __raise_softirq_irqoff(NET_RX_SOFTIRQ); + __netif_rx_reschedule(dev, undo); local_irq_restore(flags); return 1; } From d27ed38765d6e01eaab443a7909f53a37f090e99 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 25 Apr 2006 10:58:51 -0700 Subject: [PATCH 089/160] [PATCH] sky2: add fake idle irq timer Add an fake NAPI schedule once a second. This is an attempt to work around for broken configurations with edge-triggered interrupts. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 22 +++++++++++++++++++++- drivers/net/sky2.h | 2 ++ 2 files changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 618fde8622ca..6673ddf763a4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2086,6 +2086,20 @@ static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port, } } +/* If idle then force a fake soft NAPI poll once a second + * to work around cases where sharing an edge triggered interrupt. + */ +static void sky2_idle(unsigned long arg) +{ + struct net_device *dev = (struct net_device *) arg; + + local_irq_disable(); + if (__netif_rx_schedule_prep(dev)) + __netif_rx_schedule(dev); + local_irq_enable(); +} + + static int sky2_poll(struct net_device *dev0, int *budget) { struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw; @@ -2134,6 +2148,8 @@ static int sky2_poll(struct net_device *dev0, int *budget) sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); } + mod_timer(&hw->idle_timer, jiffies + HZ); + local_irq_disable(); __netif_rx_complete(dev0); @@ -3288,6 +3304,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, sky2_write32(hw, B0_IMSK, Y2_IS_BASE); + setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) dev); + pci_set_drvdata(pdev, hw); return 0; @@ -3323,13 +3341,15 @@ static void __devexit sky2_remove(struct pci_dev *pdev) if (!hw) return; + del_timer_sync(&hw->idle_timer); + + sky2_write32(hw, B0_IMSK, 0); dev0 = hw->dev[0]; dev1 = hw->dev[1]; if (dev1) unregister_netdev(dev1); unregister_netdev(dev0); - sky2_write32(hw, B0_IMSK, 0); sky2_set_power_state(hw, PCI_D3hot); sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); sky2_write8(hw, B0_CTST, CS_RST_SET); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 89dd18cd12f0..b026f5653f04 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1880,6 +1880,8 @@ struct sky2_hw { struct sky2_status_le *st_le; u32 st_idx; dma_addr_t st_dma; + + struct timer_list idle_timer; int msi_detected; wait_queue_head_t msi_wait; }; From 4a15d56f78936ec15a5d747546f25ace8fef9a03 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 25 Apr 2006 10:58:52 -0700 Subject: [PATCH 090/160] [PATCH] sky2: use ALIGN() macro The ALIGN() macro in kernel.h does the same math that the sky2 driver was using for padding. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 6673ddf763a4..393ee635b6c4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -925,8 +925,7 @@ static inline struct sk_buff *sky2_alloc_skb(unsigned int size, gfp_t gfp_mask) skb = alloc_skb(size + RX_SKB_ALIGN, gfp_mask); if (likely(skb)) { unsigned long p = (unsigned long) skb->data; - skb_reserve(skb, - ((p + RX_SKB_ALIGN - 1) & ~(RX_SKB_ALIGN - 1)) - p); + skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); } return skb; @@ -1686,13 +1685,12 @@ static void sky2_tx_timeout(struct net_device *dev) } -#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) /* Want receive buffer size to be multiple of 64 bits * and incl room for vlan and truncation */ static inline unsigned sky2_buf_size(int mtu) { - return roundup(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8; + return ALIGN(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8; } static int sky2_change_mtu(struct net_device *dev, int new_mtu) From 98712e5e3325247bf22a175d225526c9d5f8439b Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 25 Apr 2006 10:58:53 -0700 Subject: [PATCH 091/160] [PATCH] sky2: reset function can be devinit The sky2_reset function only called from sky2_probe. Maybe the compiler was smart enough to figure this out already. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 393ee635b6c4..ce1a8afc3313 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2219,7 +2219,7 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk) } -static int sky2_reset(struct sky2_hw *hw) +static int __devinit sky2_reset(struct sky2_hw *hw) { u16 status; u8 t8, pmd_type; From bdf9c27d020ba50b42949c383c1956216c9fd522 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 25 Apr 2006 10:58:54 -0700 Subject: [PATCH 092/160] [PATCH] sky2: version 1.2 Update to version 1.2 Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index ce1a8afc3313..227df9876a2c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -51,7 +51,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.1" +#define DRV_VERSION "1.2" #define PFX DRV_NAME " " /* From 86a0f04387bfa814618bf0c2c8b203899c4fa5d2 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Mon, 24 Apr 2006 18:41:31 -0400 Subject: [PATCH 093/160] [PATCH] forcedeth: fix initialization This patch fixes the nic initialization. If the nic was in low power mode, it brings it back to normal power. Also, it utilizes a new hardware reset during the init. I am resending based on feedback, I corrected the register size mapping and delay after posted write. Signed-Off-By: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 79 ++++++++++++++++++++++++++++++++++------- 1 file changed, 67 insertions(+), 12 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 7627a75f4f7c..9788b1ef2e7d 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -105,6 +105,7 @@ * 0.50: 20 Jan 2006: Add 8021pq tagging support. * 0.51: 20 Jan 2006: Add 64bit consistent memory allocation for rings. * 0.52: 20 Jan 2006: Add MSI/MSIX support. + * 0.53: 19 Mar 2006: Fix init from low power mode and add hw reset. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -116,7 +117,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.52" +#define FORCEDETH_VERSION "0.53" #define DRV_NAME "forcedeth" #include @@ -160,6 +161,7 @@ #define DEV_HAS_VLAN 0x0020 /* device supports vlan tagging and striping */ #define DEV_HAS_MSI 0x0040 /* device supports MSI */ #define DEV_HAS_MSI_X 0x0080 /* device supports MSI-X */ +#define DEV_HAS_POWER_CNTRL 0x0100 /* device supports power savings */ enum { NvRegIrqStatus = 0x000, @@ -203,6 +205,8 @@ enum { #define NVREG_MISC1_HD 0x02 #define NVREG_MISC1_FORCE 0x3b0f3c + NvRegMacReset = 0x3c, +#define NVREG_MAC_RESET_ASSERT 0x0F3 NvRegTransmitterControl = 0x084, #define NVREG_XMITCTL_START 0x01 NvRegTransmitterStatus = 0x088, @@ -326,6 +330,10 @@ enum { NvRegMSIXMap0 = 0x3e0, NvRegMSIXMap1 = 0x3e4, NvRegMSIXIrqStatus = 0x3f0, + + NvRegPowerState2 = 0x600, +#define NVREG_POWERSTATE2_POWERUP_MASK 0x0F11 +#define NVREG_POWERSTATE2_POWERUP_REV_A3 0x0001 }; /* Big endian: should work, but is untested */ @@ -414,7 +422,8 @@ typedef union _ring_type { #define NV_RX3_VLAN_TAG_MASK (0x0000FFFF) /* Miscelaneous hardware related defines: */ -#define NV_PCI_REGSZ 0x270 +#define NV_PCI_REGSZ_VER1 0x270 +#define NV_PCI_REGSZ_VER2 0x604 /* various timeout delays: all in usec */ #define NV_TXRX_RESET_DELAY 4 @@ -431,6 +440,7 @@ typedef union _ring_type { #define NV_MIIBUSY_DELAY 50 #define NV_MIIPHY_DELAY 10 #define NV_MIIPHY_DELAYMAX 10000 +#define NV_MAC_RESET_DELAY 64 #define NV_WAKEUPPATTERNS 5 #define NV_WAKEUPMASKENTRIES 4 @@ -552,6 +562,8 @@ struct fe_priv { u32 desc_ver; u32 txrxctl_bits; u32 vlanctl_bits; + u32 driver_data; + u32 register_size; void __iomem *base; @@ -919,6 +931,24 @@ static void nv_txrx_reset(struct net_device *dev) pci_push(base); } +static void nv_mac_reset(struct net_device *dev) +{ + struct fe_priv *np = netdev_priv(dev); + u8 __iomem *base = get_hwbase(dev); + + dprintk(KERN_DEBUG "%s: nv_mac_reset\n", dev->name); + writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->txrxctl_bits, base + NvRegTxRxControl); + pci_push(base); + writel(NVREG_MAC_RESET_ASSERT, base + NvRegMacReset); + pci_push(base); + udelay(NV_MAC_RESET_DELAY); + writel(0, base + NvRegMacReset); + pci_push(base); + udelay(NV_MAC_RESET_DELAY); + writel(NVREG_TXRXCTL_BIT2 | np->txrxctl_bits, base + NvRegTxRxControl); + pci_push(base); +} + /* * nv_get_stats: dev->get_stats function * Get latest stats value from the nic. @@ -1331,7 +1361,7 @@ static void nv_tx_timeout(struct net_device *dev) dev->name, (unsigned long)np->ring_addr, np->next_tx, np->nic_tx); printk(KERN_INFO "%s: Dumping tx registers\n", dev->name); - for (i=0;i<0x400;i+= 32) { + for (i=0;i<=np->register_size;i+= 32) { printk(KERN_INFO "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n", i, readl(base + i + 0), readl(base + i + 4), @@ -2488,11 +2518,11 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) } #define FORCEDETH_REGS_VER 1 -#define FORCEDETH_REGS_SIZE 0x400 /* 256 32-bit registers */ static int nv_get_regs_len(struct net_device *dev) { - return FORCEDETH_REGS_SIZE; + struct fe_priv *np = netdev_priv(dev); + return np->register_size; } static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) @@ -2504,7 +2534,7 @@ static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void regs->version = FORCEDETH_REGS_VER; spin_lock_irq(&np->lock); - for (i=0;iregister_size/sizeof(u32); i++) rbuf[i] = readl(base + i*sizeof(u32)); spin_unlock_irq(&np->lock); } @@ -2608,6 +2638,8 @@ static int nv_open(struct net_device *dev) dprintk(KERN_DEBUG "nv_open: begin\n"); /* 1) erase previous misconfiguration */ + if (np->driver_data & DEV_HAS_POWER_CNTRL) + nv_mac_reset(dev); /* 4.1-1: stop adapter: ignored, 4.3 seems to be overkill */ writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA); writel(0, base + NvRegMulticastAddrB); @@ -2878,6 +2910,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i unsigned long addr; u8 __iomem *base; int err, i; + u32 powerstate; dev = alloc_etherdev(sizeof(struct fe_priv)); err = -ENOMEM; @@ -2910,6 +2943,11 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (err < 0) goto out_disable; + if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL)) + np->register_size = NV_PCI_REGSZ_VER2; + else + np->register_size = NV_PCI_REGSZ_VER1; + err = -EINVAL; addr = 0; for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { @@ -2918,7 +2956,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i pci_resource_len(pci_dev, i), pci_resource_flags(pci_dev, i)); if (pci_resource_flags(pci_dev, i) & IORESOURCE_MEM && - pci_resource_len(pci_dev, i) >= NV_PCI_REGSZ) { + pci_resource_len(pci_dev, i) >= np->register_size) { addr = pci_resource_start(pci_dev, i); break; } @@ -2929,6 +2967,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i goto out_relreg; } + /* copy of driver data */ + np->driver_data = id->driver_data; + /* handle different descriptor versions */ if (id->driver_data & DEV_HAS_HIGH_DMA) { /* packet format 3: supports 40-bit addressing */ @@ -2986,7 +3027,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i } err = -ENOMEM; - np->base = ioremap(addr, NV_PCI_REGSZ); + np->base = ioremap(addr, np->register_size); if (!np->base) goto out_relreg; dev->base_addr = (unsigned long)np->base; @@ -3062,6 +3103,20 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i writel(0, base + NvRegWakeUpFlags); np->wolenabled = 0; + if (id->driver_data & DEV_HAS_POWER_CNTRL) { + u8 revision_id; + pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id); + + /* take phy and nic out of low power mode */ + powerstate = readl(base + NvRegPowerState2); + powerstate &= ~NVREG_POWERSTATE2_POWERUP_MASK; + if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 || + id->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) && + revision_id >= 0xA3) + powerstate |= NVREG_POWERSTATE2_POWERUP_REV_A3; + writel(powerstate, base + NvRegPowerState2); + } + if (np->desc_ver == DESC_VER_1) { np->tx_flags = NV_TX_VALID; } else { @@ -3223,19 +3278,19 @@ static struct pci_device_id pci_tbl[] = { }, { /* MCP51 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL, }, { /* MCP51 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL, }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL, }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL, }, {0,}, }; From 00522fb41a2a9bf0f98a007c0e2b516a3873148c Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 26 Apr 2006 14:39:29 +0200 Subject: [PATCH 094/160] [PATCH] splice: rearrange moving to/from pipe helpers We need these for people writing their own ->splice_read/write hooks. Signed-off-by: Jens Axboe --- fs/splice.c | 35 +++++++++++------------------------ include/linux/pipe_fs_i.h | 17 +++++++++++++++++ 2 files changed, 28 insertions(+), 24 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index 0b2c1f060cae..447ebc0a37f3 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -29,23 +29,13 @@ #include #include -/* - * Passed to the actors - */ -struct splice_desc { - unsigned int len, total_len; /* current and remaining length */ - unsigned int flags; /* splice flags */ - struct file *file; /* file to read/write */ - loff_t pos; /* file position */ -}; - struct partial_page { unsigned int offset; unsigned int len; }; /* - * Passed to move_to_pipe + * Passed to splice_to_pipe */ struct splice_pipe_desc { struct page **pages; /* page map */ @@ -192,8 +182,8 @@ static struct pipe_buf_operations user_page_pipe_buf_ops = { * Pipe output worker. This sets up our pipe format with the page cache * pipe buffer operations. Otherwise very similar to the regular pipe_writev(). */ -static ssize_t move_to_pipe(struct pipe_inode_info *pipe, - struct splice_pipe_desc *spd) +static ssize_t splice_to_pipe(struct pipe_inode_info *pipe, + struct splice_pipe_desc *spd) { int ret, do_wakeup, page_nr; @@ -432,7 +422,7 @@ fill_it: } if (spd.nr_pages) - return move_to_pipe(pipe, &spd); + return splice_to_pipe(pipe, &spd); return error; } @@ -666,17 +656,14 @@ out_nomem: return ret; } -typedef int (splice_actor)(struct pipe_inode_info *, struct pipe_buffer *, - struct splice_desc *); - /* * Pipe input worker. Most of this logic works like a regular pipe, the * key here is the 'actor' worker passed in that actually moves the data * to the wanted destination. See pipe_to_file/pipe_to_sendpage above. */ -static ssize_t move_from_pipe(struct pipe_inode_info *pipe, struct file *out, - loff_t *ppos, size_t len, unsigned int flags, - splice_actor *actor) +ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, + loff_t *ppos, size_t len, unsigned int flags, + splice_actor *actor) { int ret, do_wakeup, err; struct splice_desc sd; @@ -795,7 +782,7 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, struct address_space *mapping = out->f_mapping; ssize_t ret; - ret = move_from_pipe(pipe, out, ppos, len, flags, pipe_to_file); + ret = splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_file); if (ret > 0) { struct inode *inode = mapping->host; @@ -837,7 +824,7 @@ EXPORT_SYMBOL(generic_file_splice_write); ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out, loff_t *ppos, size_t len, unsigned int flags) { - return move_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage); + return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage); } EXPORT_SYMBOL(generic_splice_sendpage); @@ -924,7 +911,7 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, /* * We don't have an immediate reader, but we'll read the stuff - * out of the pipe right after the move_to_pipe(). So set + * out of the pipe right after the splice_to_pipe(). So set * PIPE_READERS appropriately. */ pipe->readers = 1; @@ -1210,7 +1197,7 @@ static long do_vmsplice(struct file *file, const struct iovec __user *iov, if (spd.nr_pages <= 0) return spd.nr_pages; - return move_to_pipe(pipe, &spd); + return splice_to_pipe(pipe, &spd); } asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov, diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index ef7f33c0be19..0008d4bd4059 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -61,4 +61,21 @@ void __free_pipe_info(struct pipe_inode_info *); /* from/to, of course */ #define SPLICE_F_MORE (0x04) /* expect more data */ +/* + * Passed to the actors + */ +struct splice_desc { + unsigned int len, total_len; /* current and remaining length */ + unsigned int flags; /* splice flags */ + struct file *file; /* file to read/write */ + loff_t pos; /* file position */ +}; + +typedef int (splice_actor)(struct pipe_inode_info *, struct pipe_buffer *, + struct splice_desc *); + +extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *, + loff_t *, size_t, unsigned int, + splice_actor *); + #endif From 1ebd32fc54bd04de6b3944587f25513c0681f98e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 26 Apr 2006 14:40:08 +0200 Subject: [PATCH 095/160] [PATCH] splice: add ->splice_write support for /dev/null Useful for testing. Signed-off-by: Jens Axboe --- drivers/char/mem.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 66719f9d294c..1fa9fa157c12 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -578,6 +579,18 @@ static ssize_t write_null(struct file * file, const char __user * buf, return count; } +static int pipe_to_null(struct pipe_inode_info *info, struct pipe_buffer *buf, + struct splice_desc *sd) +{ + return sd->len; +} + +static ssize_t splice_write_null(struct pipe_inode_info *pipe,struct file *out, + loff_t *ppos, size_t len, unsigned int flags) +{ + return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_null); +} + #ifdef CONFIG_MMU /* * For fun, we are using the MMU for this. @@ -785,6 +798,7 @@ static struct file_operations null_fops = { .llseek = null_lseek, .read = read_null, .write = write_null, + .splice_write = splice_write_null, }; #if defined(CONFIG_ISA) || !defined(__mc68000__) From c82ffb07cd1aa356c599999c4f0dc5155a91d318 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 26 Apr 2006 07:20:48 +0100 Subject: [PATCH 096/160] [PATCH] fix leak in activate_ep_files() Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/usb/gadget/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 42b457030b03..0eb010a3f5bc 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1614,6 +1614,7 @@ static int activate_ep_files (struct dev_data *dev) data, &ep_config_operations, &data->dentry); if (!data->inode) { + usb_ep_free_request(ep, data->req); kfree (data); goto enomem; } From de0bb97aff6743f71abb8ec581238e2bdae9cdd1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 26 Apr 2006 07:26:09 +0100 Subject: [PATCH 097/160] [PATCH] forgotten ->b_data in memcpy() call in ext3/resize.c (oopsable) sbi->s_group_desc is an array of pointers to buffer_head. memcpy() of buffer size from address of buffer_head is a bad idea - it will generate junk in any case, may oops if buffer_head is close to the end of slab page and next page is not mapped and isn't what was intended there. IOW, ->b_data is missing in that call. Fortunately, result doesn't go into the primary on-disk data structures, so only backup ones get crap written to them; that had allowed this bug to remain unnoticed until now. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- fs/ext3/resize.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c index c5ffa8523968..8aac5334680d 100644 --- a/fs/ext3/resize.c +++ b/fs/ext3/resize.c @@ -213,7 +213,7 @@ static int setup_new_group_blocks(struct super_block *sb, goto exit_bh; } lock_buffer(bh); - memcpy(gdb->b_data, sbi->s_group_desc[i], bh->b_size); + memcpy(gdb->b_data, sbi->s_group_desc[i]->b_data, bh->b_size); set_buffer_uptodate(gdb); unlock_buffer(bh); ext3_journal_dirty_metadata(handle, gdb); From 6ad0013b316367671ef316cff91ab2d912e309c9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 26 Apr 2006 07:28:09 +0100 Subject: [PATCH 098/160] [PATCH] fix mips sys32_p{read,write} Switched to use of sys_pread64()/sys_pwrite64() rather than keep duplicating their guts; among the little things that had been missing there were such as ret = security_file_permission (file, MAY_READ); Gotta love the LSM robustness, right? Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/mips/kernel/linux32.c | 64 ++------------------------------------ 1 file changed, 2 insertions(+), 62 deletions(-) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 7c953bcc5f6a..a7d2bb3cf835 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -356,73 +356,13 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high, asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf, size_t count, u32 unused, u64 a4, u64 a5) { - ssize_t ret; - struct file * file; - ssize_t (*read)(struct file *, char __user *, size_t, loff_t *); - loff_t pos; - - ret = -EBADF; - file = fget(fd); - if (!file) - goto bad_file; - if (!(file->f_mode & FMODE_READ)) - goto out; - pos = merge_64(a4, a5); - ret = rw_verify_area(READ, file, &pos, count); - if (ret < 0) - goto out; - ret = -EINVAL; - if (!file->f_op || !(read = file->f_op->read)) - goto out; - if (pos < 0) - goto out; - ret = -ESPIPE; - if (!(file->f_mode & FMODE_PREAD)) - goto out; - ret = read(file, buf, count, &pos); - if (ret > 0) - dnotify_parent(file->f_dentry, DN_ACCESS); -out: - fput(file); -bad_file: - return ret; + return sys_pread64(fd, buf, count, merge_64(a4, a5)); } asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf, size_t count, u32 unused, u64 a4, u64 a5) { - ssize_t ret; - struct file * file; - ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *); - loff_t pos; - - ret = -EBADF; - file = fget(fd); - if (!file) - goto bad_file; - if (!(file->f_mode & FMODE_WRITE)) - goto out; - pos = merge_64(a4, a5); - ret = rw_verify_area(WRITE, file, &pos, count); - if (ret < 0) - goto out; - ret = -EINVAL; - if (!file->f_op || !(write = file->f_op->write)) - goto out; - if (pos < 0) - goto out; - - ret = -ESPIPE; - if (!(file->f_mode & FMODE_PWRITE)) - goto out; - - ret = write(file, buf, count, &pos); - if (ret > 0) - dnotify_parent(file->f_dentry, DN_MODIFY); -out: - fput(file); -bad_file: - return ret; + return sys_pwrite64(fd, buf, count, merge_64(a4, a5)); } asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid, From a090d9132c1e53e3517111123680c15afb25c0a4 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 26 Apr 2006 07:32:40 +0100 Subject: [PATCH 099/160] [PATCH] protect ext3 ioctl modifying append_only, immutable, etc. with i_mutex All modifications of ->i_flags in inodes that might be visible to somebody else must be under ->i_mutex. That patch fixes ext3 ioctl() setting S_APPEND and friends. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- fs/ext3/ioctl.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/fs/ext3/ioctl.c b/fs/ext3/ioctl.c index aaf1da17b6d4..8c22aa9a7fbb 100644 --- a/fs/ext3/ioctl.c +++ b/fs/ext3/ioctl.c @@ -48,6 +48,7 @@ int ext3_ioctl (struct inode * inode, struct file * filp, unsigned int cmd, if (!S_ISDIR(inode->i_mode)) flags &= ~EXT3_DIRSYNC_FL; + mutex_lock(&inode->i_mutex); oldflags = ei->i_flags; /* The JOURNAL_DATA flag is modifiable only by root */ @@ -60,8 +61,10 @@ int ext3_ioctl (struct inode * inode, struct file * filp, unsigned int cmd, * This test looks nicer. Thanks to Pauline Middelink */ if ((flags ^ oldflags) & (EXT3_APPEND_FL | EXT3_IMMUTABLE_FL)) { - if (!capable(CAP_LINUX_IMMUTABLE)) + if (!capable(CAP_LINUX_IMMUTABLE)) { + mutex_unlock(&inode->i_mutex); return -EPERM; + } } /* @@ -69,14 +72,18 @@ int ext3_ioctl (struct inode * inode, struct file * filp, unsigned int cmd, * the relevant capability. */ if ((jflag ^ oldflags) & (EXT3_JOURNAL_DATA_FL)) { - if (!capable(CAP_SYS_RESOURCE)) + if (!capable(CAP_SYS_RESOURCE)) { + mutex_unlock(&inode->i_mutex); return -EPERM; + } } handle = ext3_journal_start(inode, 1); - if (IS_ERR(handle)) + if (IS_ERR(handle)) { + mutex_unlock(&inode->i_mutex); return PTR_ERR(handle); + } if (IS_SYNC(inode)) handle->h_sync = 1; err = ext3_reserve_inode_write(handle, inode, &iloc); @@ -93,11 +100,14 @@ int ext3_ioctl (struct inode * inode, struct file * filp, unsigned int cmd, err = ext3_mark_iloc_dirty(handle, inode, &iloc); flags_err: ext3_journal_stop(handle); - if (err) + if (err) { + mutex_unlock(&inode->i_mutex); return err; + } if ((jflag ^ oldflags) & (EXT3_JOURNAL_DATA_FL)) err = ext3_change_inode_journal_flag(inode, jflag); + mutex_unlock(&inode->i_mutex); return err; } case EXT3_IOC_GETVERSION: From e7edf9cdeddc0cff125e8e658216efb2ff2b2219 Mon Sep 17 00:00:00 2001 From: James Morris Date: Wed, 26 Apr 2006 02:45:03 -0400 Subject: [PATCH 100/160] [PATCH] LSM: add missing hook to do_compat_readv_writev() This patch addresses a flaw in LSM, where there is no mediation of readv() and writev() in for 32-bit compatible apps using a 64-bit kernel. This bug was discovered and fixed initially in the native readv/writev code [1], but was not fixed in the compat code. Thanks to Al for spotting this one. [1] http://lwn.net/Articles/154282/ Signed-off-by: James Morris Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- fs/compat.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/compat.c b/fs/compat.c index 7f8e26ea427c..2e32bd340474 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1217,6 +1217,10 @@ static ssize_t compat_do_readv_writev(int type, struct file *file, if (ret < 0) goto out; + ret = security_file_permission(file, type == READ ? MAY_READ:MAY_WRITE); + if (ret) + goto out; + fnv = NULL; if (type == READ) { fn = file->f_op->read; From 649bbaa484bcdce94f40a1b97a6a2ded0549e8a2 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Mon, 24 Apr 2006 19:35:15 -0700 Subject: [PATCH 101/160] [PATCH] Remove __devinitdata from notifier block definitions Few of the notifier_chain_register() callers use __devinitdata in the definition of notifier_block data structure. It is incorrect as the data structure should be available after the initializations (they do not unregister them during initializations). This was leading to an oops when notifier_chain_register() call is invoked for those callback chains after initialization. This patch fixes all such usages to _not_ have the notifier_block data structure in the init data section. Signed-off-by: Chandra Seetharaman Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/sysfs.c | 2 +- arch/s390/appldata/appldata_base.c | 2 +- block/ll_rw_blk.c | 2 +- kernel/hrtimer.c | 2 +- kernel/rcupdate.c | 2 +- kernel/sched.c | 2 +- kernel/softirq.c | 2 +- kernel/softlockup.c | 2 +- kernel/timer.c | 2 +- 9 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 73560ef6f802..0235eb7ecba6 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -297,7 +297,7 @@ static int __devinit sysfs_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata sysfs_cpu_nb = { +static struct notifier_block sysfs_cpu_nb = { .notifier_call = sysfs_cpu_notify, }; diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 54d35c130907..9a22434a580c 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -652,7 +652,7 @@ appldata_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata appldata_nb = { +static struct notifier_block appldata_nb = { .notifier_call = appldata_cpu_notify, }; diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 1755c053fd68..e5041a02e21f 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -3385,7 +3385,7 @@ static int blk_cpu_notify(struct notifier_block *self, unsigned long action, } -static struct notifier_block __devinitdata blk_cpu_notifier = { +static struct notifier_block blk_cpu_notifier = { .notifier_call = blk_cpu_notify, }; diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index d2a7296c8251..4b63bb9797b2 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -860,7 +860,7 @@ static int __devinit hrtimer_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata hrtimers_nb = { +static struct notifier_block hrtimers_nb = { .notifier_call = hrtimer_cpu_notify, }; diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index 13458bbaa1be..193e5a0df198 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -537,7 +537,7 @@ static int __devinit rcu_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata rcu_nb = { +static struct notifier_block rcu_nb = { .notifier_call = rcu_cpu_notify, }; diff --git a/kernel/sched.c b/kernel/sched.c index 365f0b90b4de..4c64f85698ae 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4814,7 +4814,7 @@ static int migration_call(struct notifier_block *nfb, unsigned long action, /* Register at highest priority so that task migration (migrate_all_tasks) * happens before everything else. */ -static struct notifier_block __devinitdata migration_notifier = { +static struct notifier_block migration_notifier = { .notifier_call = migration_call, .priority = 10 }; diff --git a/kernel/softirq.c b/kernel/softirq.c index ec8fed42a86f..a13f2b342e4b 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -484,7 +484,7 @@ static int __devinit cpu_callback(struct notifier_block *nfb, return NOTIFY_OK; } -static struct notifier_block __devinitdata cpu_nfb = { +static struct notifier_block cpu_nfb = { .notifier_call = cpu_callback }; diff --git a/kernel/softlockup.c b/kernel/softlockup.c index ced91e1ff564..dabebac50868 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -140,7 +140,7 @@ cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) return NOTIFY_OK; } -static struct notifier_block __devinitdata cpu_nfb = { +static struct notifier_block cpu_nfb = { .notifier_call = cpu_callback }; diff --git a/kernel/timer.c b/kernel/timer.c index 883773788836..d355d5a4d5ae 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1334,7 +1334,7 @@ static int __devinit timer_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata timers_nb = { +static struct notifier_block timers_nb = { .notifier_call = timer_cpu_notify, }; From 83d722f7e198b034699b1500d98729beff930efd Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Mon, 24 Apr 2006 19:35:21 -0700 Subject: [PATCH 102/160] [PATCH] Remove __devinit and __cpuinit from notifier_call definitions Few of the notifier_chain_register() callers use __init in the definition of notifier_call. It is incorrect as the function definition should be available after the initializations (they do not unregister them during initializations). This patch fixes all such usages to _not_ have the notifier_call __init section. Signed-off-by: Chandra Seetharaman Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/intel_cacheinfo.c | 2 +- arch/ia64/kernel/palinfo.c | 2 +- arch/ia64/kernel/salinfo.c | 2 +- arch/ia64/kernel/topology.c | 2 +- arch/powerpc/kernel/sysfs.c | 2 +- arch/x86_64/kernel/mce.c | 2 +- arch/x86_64/kernel/mce_amd.c | 2 +- drivers/base/topology.c | 2 +- drivers/cpufreq/cpufreq.c | 2 +- kernel/hrtimer.c | 2 +- kernel/profile.c | 2 +- kernel/rcupdate.c | 2 +- kernel/softirq.c | 2 +- kernel/softlockup.c | 2 +- kernel/timer.c | 2 +- kernel/workqueue.c | 2 +- mm/page_alloc.c | 2 +- mm/slab.c | 2 +- mm/vmscan.c | 2 +- 19 files changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index 9df87b03612c..c8547a6fa7e6 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -642,7 +642,7 @@ static void __cpuexit cache_remove_dev(struct sys_device * sys_dev) return; } -static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb, +static int cacheinfo_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c index 6386f63c413e..859fb37ff49b 100644 --- a/arch/ia64/kernel/palinfo.c +++ b/arch/ia64/kernel/palinfo.c @@ -959,7 +959,7 @@ remove_palinfo_proc_entries(unsigned int hcpu) } } -static int __devinit palinfo_cpu_callback(struct notifier_block *nfb, +static int palinfo_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 9d5a823479a3..663a186ad194 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -572,7 +572,7 @@ static struct file_operations salinfo_data_fops = { }; #ifdef CONFIG_HOTPLUG_CPU -static int __devinit +static int salinfo_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) { unsigned int i, cpu = (unsigned long)hcpu; diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index b47476d655f1..7da4739f536e 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -429,7 +429,7 @@ static int __cpuinit cache_remove_dev(struct sys_device * sys_dev) * When a cpu is hot-plugged, do a check and initiate * cache kobject if necessary */ -static int __cpuinit cache_cpu_callback(struct notifier_block *nfb, +static int cache_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 0235eb7ecba6..ed737cacf92d 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -279,7 +279,7 @@ static void unregister_cpu_online(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit sysfs_cpu_notify(struct notifier_block *self, +static int sysfs_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)(long)hcpu; diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index 6f0790e8b6d3..c69fc43cee7b 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -629,7 +629,7 @@ static __cpuinit void mce_remove_device(unsigned int cpu) #endif /* Get notified when a cpu comes on/off. Be hotplug friendly. */ -static __cpuinit int +static int mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c index d3ad7d81266d..d13b241ad094 100644 --- a/arch/x86_64/kernel/mce_amd.c +++ b/arch/x86_64/kernel/mce_amd.c @@ -482,7 +482,7 @@ static void threshold_remove_device(unsigned int cpu) #endif /* get notified when a cpu comes on/off */ -static __cpuinit int threshold_cpu_callback(struct notifier_block *nfb, +static int threshold_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { /* cpu was unsigned int to begin with */ diff --git a/drivers/base/topology.c b/drivers/base/topology.c index 915810f6237e..8c52421cbc54 100644 --- a/drivers/base/topology.c +++ b/drivers/base/topology.c @@ -107,7 +107,7 @@ static int __cpuinit topology_remove_dev(struct sys_device * sys_dev) return 0; } -static int __cpuinit topology_cpu_callback(struct notifier_block *nfb, +static int topology_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 9759d05b1972..29b2fa5534ae 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1497,7 +1497,7 @@ int cpufreq_update_policy(unsigned int cpu) } EXPORT_SYMBOL(cpufreq_update_policy); -static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb, +static int cpufreq_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 4b63bb9797b2..b7f0388bd71c 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -836,7 +836,7 @@ static void migrate_hrtimers(int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit hrtimer_cpu_notify(struct notifier_block *self, +static int hrtimer_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { long cpu = (long)hcpu; diff --git a/kernel/profile.c b/kernel/profile.c index 5a730fdb1a2c..68afe121e507 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -299,7 +299,7 @@ out: } #ifdef CONFIG_HOTPLUG_CPU -static int __devinit profile_cpu_callback(struct notifier_block *info, +static int profile_cpu_callback(struct notifier_block *info, unsigned long action, void *__cpu) { int node, cpu = (unsigned long)__cpu; diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index 193e5a0df198..6d32ff26f948 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -520,7 +520,7 @@ static void __devinit rcu_online_cpu(int cpu) tasklet_init(&per_cpu(rcu_tasklet, cpu), rcu_process_callbacks, 0UL); } -static int __devinit rcu_cpu_notify(struct notifier_block *self, +static int rcu_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { long cpu = (long)hcpu; diff --git a/kernel/softirq.c b/kernel/softirq.c index a13f2b342e4b..336f92d64e2e 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -446,7 +446,7 @@ static void takeover_tasklets(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit cpu_callback(struct notifier_block *nfb, +static int cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { diff --git a/kernel/softlockup.c b/kernel/softlockup.c index dabebac50868..14c7faf02909 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -104,7 +104,7 @@ static int watchdog(void * __bind_cpu) /* * Create/destroy watchdog threads as CPUs come and go: */ -static int __devinit +static int cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { int hotcpu = (unsigned long)hcpu; diff --git a/kernel/timer.c b/kernel/timer.c index d355d5a4d5ae..67eaf0f54096 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1314,7 +1314,7 @@ static void __devinit migrate_timers(int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit timer_cpu_notify(struct notifier_block *self, +static int timer_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { long cpu = (long)hcpu; diff --git a/kernel/workqueue.c b/kernel/workqueue.c index e9e464a90376..880fb415a8f6 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -547,7 +547,7 @@ static void take_over_work(struct workqueue_struct *wq, unsigned int cpu) } /* We're holding the cpucontrol mutex here */ -static int __devinit workqueue_cpu_callback(struct notifier_block *nfb, +static int workqueue_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 123c60586740..ea77c999047e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1962,7 +1962,7 @@ static inline void free_zone_pagesets(int cpu) } } -static int __cpuinit pageset_cpuup_callback(struct notifier_block *nfb, +static int pageset_cpuup_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { diff --git a/mm/slab.c b/mm/slab.c index e6ef9bd52335..af5c5237e11a 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -1036,7 +1036,7 @@ static inline void free_alien_cache(struct array_cache **ac_ptr) #endif -static int __devinit cpuup_callback(struct notifier_block *nfb, +static int cpuup_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { long cpu = (long)hcpu; diff --git a/mm/vmscan.c b/mm/vmscan.c index acdf001d6941..4649a63a8cb6 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1328,7 +1328,7 @@ repeat: not required for correctness. So if the last cpu in a node goes away, we get changed to run anywhere: as the first one comes back, restore their cpu bindings. */ -static int __devinit cpu_callback(struct notifier_block *nfb, +static int cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { pg_data_t *pgdat; From 2be4d50295e2b6f62c07b614e1b103e280dddb84 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 26 Apr 2006 19:19:25 -0700 Subject: [PATCH 103/160] Linux v2.6.17-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a940eaefe1c4..6bf99624bd4c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 17 -EXTRAVERSION =-rc2 +EXTRAVERSION =-rc3 NAME=Sliding Snow Leopard # *DOCUMENTATION* From eb645a24de82496434cc81171d7f350edb327399 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 27 Apr 2006 08:44:27 +0200 Subject: [PATCH 104/160] [PATCH] splice: switch to using page_cache_readahead() Avoids doing useless work, when the file is fully cached. Signed-off-by: Jens Axboe --- fs/splice.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index 447ebc0a37f3..dc205f643090 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -299,8 +299,8 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, * read-ahead if this is a non-zero offset (we are likely doing small * chunk splice and the page is already there) for a single page. */ - if (!loff || spd.nr_pages > 1) - do_page_cache_readahead(mapping, in, index, spd.nr_pages); + if (!loff || nr_pages > 1) + page_cache_readahead(mapping, &in->f_ra, in, index, nr_pages); /* * Now fill in the holes: From ebf43500ef148a380bd132743c3fc530111ac620 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 27 Apr 2006 08:46:01 +0200 Subject: [PATCH 105/160] [PATCH] Add find_get_pages_contig(): contiguous variant of find_get_pages() find_get_pages_contig() will break out if we hit a hole in the page cache. From Andrew Morton, small modifications and documentation by me. Signed-off-by: Jens Axboe --- include/linux/pagemap.h | 2 ++ mm/filemap.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+) diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 9539efd4f7e6..7a1af574dedf 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -78,6 +78,8 @@ extern struct page * find_or_create_page(struct address_space *mapping, unsigned long index, gfp_t gfp_mask); unsigned find_get_pages(struct address_space *mapping, pgoff_t start, unsigned int nr_pages, struct page **pages); +unsigned find_get_pages_contig(struct address_space *mapping, pgoff_t start, + unsigned int nr_pages, struct page **pages); unsigned find_get_pages_tag(struct address_space *mapping, pgoff_t *index, int tag, unsigned int nr_pages, struct page **pages); diff --git a/mm/filemap.c b/mm/filemap.c index 3ef20739e725..fd57442186cb 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -697,6 +697,38 @@ unsigned find_get_pages(struct address_space *mapping, pgoff_t start, return ret; } +/** + * find_get_pages_contig - gang contiguous pagecache lookup + * @mapping: The address_space to search + * @index: The starting page index + * @nr_pages: The maximum number of pages + * @pages: Where the resulting pages are placed + * + * find_get_pages_contig() works exactly like find_get_pages(), except + * that the returned number of pages are guaranteed to be contiguous. + * + * find_get_pages_contig() returns the number of pages which were found. + */ +unsigned find_get_pages_contig(struct address_space *mapping, pgoff_t index, + unsigned int nr_pages, struct page **pages) +{ + unsigned int i; + unsigned int ret; + + read_lock_irq(&mapping->tree_lock); + ret = radix_tree_gang_lookup(&mapping->page_tree, + (void **)pages, index, nr_pages); + for (i = 0; i < ret; i++) { + if (pages[i]->mapping == NULL || pages[i]->index != index) + break; + + page_cache_get(pages[i]); + index++; + } + read_unlock_irq(&mapping->tree_lock); + return i; +} + /* * Like find_get_pages, except we only return pages which are tagged with * `tag'. We update *index to index the next page for the traversal. From eb20796bf6fdb95ccf51440ba2a827149bdc037f Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 27 Apr 2006 11:05:22 +0200 Subject: [PATCH 106/160] [PATCH] splice: make the read-side do batched page lookups Use the new find_get_pages_contig() to potentially look up the entire splice range in one single call. This speeds up generic_file_splice_read() quite a bit. Signed-off-by: Jens Axboe --- fs/splice.c | 113 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 74 insertions(+), 39 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index dc205f643090..a46ddd28561e 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -279,7 +279,7 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, pgoff_t index, end_index; loff_t isize; size_t total_len; - int error; + int error, page_nr; struct splice_pipe_desc spd = { .pages = pages, .partial = partial, @@ -307,7 +307,56 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, */ error = 0; total_len = 0; - for (spd.nr_pages = 0; spd.nr_pages < nr_pages; spd.nr_pages++, index++) { + + /* + * Lookup the (hopefully) full range of pages we need. + */ + spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, pages); + + /* + * If find_get_pages_contig() returned fewer pages than we needed, + * allocate the rest. + */ + index += spd.nr_pages; + while (spd.nr_pages < nr_pages) { + /* + * Page could be there, find_get_pages_contig() breaks on + * the first hole. + */ + page = find_get_page(mapping, index); + if (!page) { + /* + * page didn't exist, allocate one. + */ + page = page_cache_alloc_cold(mapping); + if (!page) + break; + + error = add_to_page_cache_lru(page, mapping, index, + mapping_gfp_mask(mapping)); + if (unlikely(error)) { + page_cache_release(page); + break; + } + /* + * add_to_page_cache() locks the page, unlock it + * to avoid convoluting the logic below even more. + */ + unlock_page(page); + } + + pages[spd.nr_pages++] = page; + index++; + } + + /* + * Now loop over the map and see if we need to start IO on any + * pages, fill in the partial map, etc. + */ + index = *ppos >> PAGE_CACHE_SHIFT; + nr_pages = spd.nr_pages; + spd.nr_pages = 0; + for (page_nr = 0; page_nr < nr_pages; page_nr++) { unsigned int this_len; if (!len) @@ -317,28 +366,7 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, * this_len is the max we'll use from this page */ this_len = min_t(unsigned long, len, PAGE_CACHE_SIZE - loff); -find_page: - /* - * lookup the page for this index - */ - page = find_get_page(mapping, index); - if (!page) { - /* - * page didn't exist, allocate one - */ - page = page_cache_alloc_cold(mapping); - if (!page) - break; - - error = add_to_page_cache_lru(page, mapping, index, - mapping_gfp_mask(mapping)); - if (unlikely(error)) { - page_cache_release(page); - break; - } - - goto readpage; - } + page = pages[page_nr]; /* * If the page isn't uptodate, we may need to start io on it @@ -360,7 +388,6 @@ find_page: */ if (!page->mapping) { unlock_page(page); - page_cache_release(page); break; } /* @@ -371,16 +398,20 @@ find_page: goto fill_it; } -readpage: /* * need to read in the page */ error = mapping->a_ops->readpage(in, page); - if (unlikely(error)) { - page_cache_release(page); + /* + * We really should re-lookup the page here, + * but it complicates things a lot. Instead + * lets just do what we already stored, and + * we'll get it the next time we are called. + */ if (error == AOP_TRUNCATED_PAGE) - goto find_page; + error = 0; + break; } @@ -389,10 +420,8 @@ readpage: */ isize = i_size_read(mapping->host); end_index = (isize - 1) >> PAGE_CACHE_SHIFT; - if (unlikely(!isize || index > end_index)) { - page_cache_release(page); + if (unlikely(!isize || index > end_index)) break; - } /* * if this is the last page, see if we need to shrink @@ -400,27 +429,33 @@ readpage: */ if (end_index == index) { loff = PAGE_CACHE_SIZE - (isize & ~PAGE_CACHE_MASK); - if (total_len + loff > isize) { - page_cache_release(page); + if (total_len + loff > isize) break; - } /* * force quit after adding this page */ - nr_pages = spd.nr_pages; + len = this_len; this_len = min(this_len, loff); loff = 0; } } fill_it: - pages[spd.nr_pages] = page; - partial[spd.nr_pages].offset = loff; - partial[spd.nr_pages].len = this_len; + partial[page_nr].offset = loff; + partial[page_nr].len = this_len; len -= this_len; total_len += this_len; loff = 0; + spd.nr_pages++; + index++; } + /* + * Release any pages at the end, if we quit early. 'i' is how far + * we got, 'nr_pages' is how many pages are in the map. + */ + while (page_nr < nr_pages) + page_cache_release(pages[page_nr++]); + if (spd.nr_pages) return splice_to_pipe(pipe, &spd); From 49e31ca8387227898710f99476f2217ea154aab0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 24 Apr 2006 10:48:54 +0100 Subject: [PATCH 107/160] [MIPS] Fix oprofile module unloading When unloading oprofile module with timer-mode, oprofile_arch_exit dereferences a NULL pointer. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/oprofile/common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index 935dd851f480..49ef8fd338d6 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -114,5 +114,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) void oprofile_arch_exit(void) { - model->exit(); + if (model) + model->exit(); } From 5dac83030a3f4a3a4d1255b13bd0f7d08e824963 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 24 Apr 2006 10:50:02 +0100 Subject: [PATCH 108/160] [MIPS] Oprofile: fix sparse warning. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/oprofile/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index 49ef8fd338d6..f2b4862aaae5 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -27,7 +27,7 @@ static int op_mips_setup(void) model->reg_setup(ctr); /* Configure the registers on all cpus. */ - on_each_cpu(model->cpu_setup, 0, 0, 1); + on_each_cpu(model->cpu_setup, NULL, 0, 1); return 0; } From c0858d82faf96ffc32b96e23927d10844d38e564 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 20 Apr 2006 00:12:05 +0900 Subject: [PATCH 109/160] [MIPS] Fix ip27 build. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip27/ip27-timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index cddf1cedf007..36b662e27b6e 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -122,7 +122,7 @@ again: xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { - if (rtc_set_time(xtime.tv_sec) == 0) { + if (rtc_mips_set_time(xtime.tv_sec) == 0) { last_rtc_update = xtime.tv_sec; } else { last_rtc_update = xtime.tv_sec - 600; From bc818247203a7bfc40296a3f5b760de84fb8e0d1 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 17 Apr 2006 21:19:12 +0900 Subject: [PATCH 110/160] [MIPS] Fix bitops for MIPS32/MIPS64 CPUs. With recent rewrite for generic bitops, fls() for 32bit kernel with MIPS64_CPU is broken. Also, ffs(), fls() should be defined the same way as the libc and compiler built-in routines (returns int instead of unsigned long). Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/bitops.h | 72 +++++++++++++++++---------------------- 1 file changed, 32 insertions(+), 40 deletions(-) diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index a1728f8c0705..d2f444537e4b 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -466,65 +466,57 @@ static inline unsigned long __ffs(unsigned long word) return __ilog2(word & -word); } +/* + * fls - find last bit set. + * @word: The word to search + * + * This is defined the same way as ffs. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static inline int fls(int word) +{ + __asm__ ("clz %0, %1" : "=r" (word) : "r" (word)); + + return 32 - word; +} + +#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64) +static inline int fls64(__u64 word) +{ + __asm__ ("dclz %0, %1" : "=r" (word) : "r" (word)); + + return 64 - word; +} +#else +#include +#endif + /* * ffs - find first bit set. * @word: The word to search * - * Returns 1..SZLONG - * Returns 0 if no bit exists + * This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). */ - -static inline unsigned long ffs(unsigned long word) +static inline int ffs(int word) { if (!word) return 0; - return __ffs(word) + 1; -} - -/* - * ffz - find first zero in word. - * @word: The word to search - * - * Undefined if no zero exists, so code should check against ~0UL first. - */ -static inline unsigned long ffz(unsigned long word) -{ - return __ffs (~word); -} - -/* - * fls - find last bit set. - * @word: The word to search - * - * Returns 1..SZLONG - * Returns 0 if no bit exists - */ -static inline unsigned long fls(unsigned long word) -{ -#ifdef CONFIG_CPU_MIPS32 - __asm__ ("clz %0, %1" : "=r" (word) : "r" (word)); - - return 32 - word; -#endif - -#ifdef CONFIG_CPU_MIPS64 - __asm__ ("dclz %0, %1" : "=r" (word) : "r" (word)); - - return 64 - word; -#endif + return fls(word & -word); } #else #include #include -#include #include +#include #endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */ -#include +#include #include #ifdef __KERNEL__ From 6f8782c4b2ed3cb652f1ad6b6d91890c7f2423ab Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 17 Apr 2006 21:24:49 +0900 Subject: [PATCH 111/160] [MIPS] Use __ffs() instead of ffs() in ip32_irq0(). With recent rewrite for generic bitops, ffs() is defined the same way as the libc and compiler built-in routines (returns int instead of unsigned long). Use __ffs() for 64bit value. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-irq.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index 22a6df94b4a1..de01c9815bdd 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -507,13 +507,14 @@ static void ip32_irq0(struct pt_regs *regs) int irq = 0; crime_int = crime->istat & crime_mask; - irq = ffs(crime_int); - crime_int = 1 << (irq - 1); + irq = __ffs(crime_int); + crime_int = 1 << irq; if (crime_int & CRIME_MACEISA_INT_MASK) { unsigned long mace_int = mace->perif.ctrl.istat; - irq = ffs(mace_int & maceisa_mask) + 32; + irq = __ffs(mace_int & maceisa_mask) + 32; } + irq++; DBG("*irq %u*\n", irq); do_IRQ(irq, regs); } From 2a2c3e451965aca35c2d0d1b2db1dbd1d839c75e Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 15 Apr 2006 00:04:18 +0900 Subject: [PATCH 112/160] [MIPS] Sparse: fix sparse for 64-bit kernels. This commit breaks sparse for 64bit kernel. The -m64 option is required. Also, some macro values (such as _MIPS_TUNE, etc.) contain double-quote characters so it would be better quoting arguments by single-quote characters. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 69b9c1b8fafc..133900aca992 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -615,7 +615,10 @@ LDFLAGS += -m $(ld-emul) ifdef CONFIG_MIPS CHECKFLAGS += $(shell $(CC) $(CFLAGS) -dM -E -xc /dev/null | \ egrep -vw '__GNUC_(MAJOR|MINOR|PATCHLEVEL)__' | \ - sed -e 's/^\#define /-D/' -e 's/ /="/' -e 's/$$/"/') + sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/") +ifdef CONFIG_64BIT +CHECKFLAGS += -m64 +endif endif OBJCOPYFLAGS += --remove-section=.reginfo From 7a8341969fe0df4a1fffa141435e742456270ffd Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Sat, 15 Apr 2006 00:31:16 +0100 Subject: [PATCH 113/160] [MIPS] 24K LV: Add core card id. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/init.c | 1 + arch/mips/mips-boards/generic/pci.c | 1 + arch/mips/mips-boards/malta/malta_int.c | 3 +++ include/asm-mips/mips-boards/generic.h | 1 + 4 files changed, 6 insertions(+) diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index 17dfe6a8cab9..df4e94735604 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -337,6 +337,7 @@ void __init prom_init(void) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: case MIPS_REVISION_CORID_CORE_EMUL_MSC: _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c index 1f6f9df74ab2..9337f6c8873a 100644 --- a/arch/mips/mips-boards/generic/pci.c +++ b/arch/mips/mips-boards/generic/pci.c @@ -198,6 +198,7 @@ void __init mips_pcibios_init(void) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: case MIPS_REVISION_CORID_CORE_EMUL_MSC: /* Set up resource ranges from the controller's registers. */ MSC_READ(MSC01_PCI_SC2PMBASL, start); diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 64db07d4dbe5..7cc0ba4f553a 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -57,6 +57,7 @@ static inline int mips_pcibios_iack(void) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: case MIPS_REVISION_CORID_CORE_EMUL_MSC: MSC_READ(MSC01_PCI_IACK, irq); irq &= 0xff; @@ -143,6 +144,7 @@ void corehi_irqdispatch(struct pt_regs *regs) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: case MIPS_REVISION_CORID_CORE_EMUL_MSC: ll_msc_irq(regs); break; @@ -309,6 +311,7 @@ void __init arch_init_irq(void) case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_24K: case MIPS_REVISION_CORID_CORE_EMUL_MSC: if (cpu_has_veic) init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs); diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h index 25b6ffc26623..fa8b913cc3e0 100644 --- a/include/asm-mips/mips-boards/generic.h +++ b/include/asm-mips/mips-boards/generic.h @@ -67,6 +67,7 @@ #define MIPS_REVISION_CORID_CORE_FPGA2 7 #define MIPS_REVISION_CORID_CORE_FPGAR2 8 #define MIPS_REVISION_CORID_CORE_FPGA3 9 +#define MIPS_REVISION_CORID_CORE_24K 10 /**** Artificial corid defines ****/ /* From 3763120a316b04c29a2b9c6e817e0e4a72005dd4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 24 Apr 2006 13:08:41 +0100 Subject: [PATCH 114/160] [MIPS] Kconfig: Clarify description of CROSSCOMPILE. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig.debug | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index d3c5cc3b9c9d..515f9e611307 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -6,7 +6,13 @@ config CROSSCOMPILE bool "Are you using a crosscompiler" help Say Y here if you are compiling the kernel on a different - architecture than the one it is intended to run on. + architecture than the one it is intended to run on. This is just a + convenience option which will select the appropriate value for + the CROSS_COMPILE make variable which otherwise has to be passed on + the command line from mips-linux-, mipsel-linux-, mips64-linux- and + mips64el-linux- as appropriate for a particular kernel configuration. + You will have to pass the value for CROSS_COMPILE manually if the + name prefix for your tools is different. config CMDLINE string "Default kernel command string" From f7062ddb23d7568c90821118f9b973b3069625c9 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 24 Apr 2006 14:58:53 +0100 Subject: [PATCH 115/160] [MIPS] Get rid of CONFIG_ADVANCED. It's been a horrible source of confusion and let users to shoot themselves into both feet with uzis to no end. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 50 ++++++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 27 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 87f0b79c6b15..ee5fbb02b28f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1067,6 +1067,7 @@ choice config CPU_MIPS32_R1 bool "MIPS32 Release 1" depends on SYS_HAS_CPU_MIPS32_R1 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1084,6 +1085,7 @@ config CPU_MIPS32_R1 config CPU_MIPS32_R2 bool "MIPS32 Release 2" depends on SYS_HAS_CPU_MIPS32_R2 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1097,6 +1099,7 @@ config CPU_MIPS32_R2 config CPU_MIPS64_R1 bool "MIPS64 Release 1" depends on SYS_HAS_CPU_MIPS64_R1 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1115,6 +1118,7 @@ config CPU_MIPS64_R1 config CPU_MIPS64_R2 bool "MIPS64 Release 2" depends on SYS_HAS_CPU_MIPS64_R2 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1129,6 +1133,7 @@ config CPU_MIPS64_R2 config CPU_R3000 bool "R3000" depends on SYS_HAS_CPU_R3000 + select CPU_HAS_WB select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM help @@ -1158,6 +1163,7 @@ config CPU_VR41XX config CPU_R4300 bool "R4300" depends on SYS_HAS_CPU_R4300 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1166,6 +1172,7 @@ config CPU_R4300 config CPU_R4X00 bool "R4x00" depends on SYS_HAS_CPU_R4X00 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1175,6 +1182,7 @@ config CPU_R4X00 config CPU_TX49XX bool "R49XX" depends on SYS_HAS_CPU_TX49XX + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1182,6 +1190,7 @@ config CPU_TX49XX config CPU_R5000 bool "R5000" depends on SYS_HAS_CPU_R5000 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1190,12 +1199,14 @@ config CPU_R5000 config CPU_R5432 bool "R5432" depends on SYS_HAS_CPU_R5432 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL config CPU_R6000 bool "R6000" depends on EXPERIMENTAL + select CPU_HAS_LLSC depends on SYS_HAS_CPU_R6000 select CPU_SUPPORTS_32BIT_KERNEL help @@ -1205,6 +1216,7 @@ config CPU_R6000 config CPU_NEVADA bool "RM52xx" depends on SYS_HAS_CPU_NEVADA + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1214,6 +1226,7 @@ config CPU_R8000 bool "R8000" depends on EXPERIMENTAL depends on SYS_HAS_CPU_R8000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_64BIT_KERNEL help @@ -1223,6 +1236,7 @@ config CPU_R8000 config CPU_R10000 bool "R10000" depends on SYS_HAS_CPU_R10000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1233,6 +1247,7 @@ config CPU_R10000 config CPU_RM7000 bool "RM7000" depends on SYS_HAS_CPU_RM7000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1241,6 +1256,7 @@ config CPU_RM7000 config CPU_RM9000 bool "RM9000" depends on SYS_HAS_CPU_RM9000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1249,6 +1265,7 @@ config CPU_RM9000 config CPU_SB1 bool "SB1" depends on SYS_HAS_CPU_SB1 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1449,6 +1466,8 @@ choice config MIPS_MT_SMTC bool "SMTC: Use all TCs on all VPEs for SMP" + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_SRS select SMP config MIPS_MT_SMP @@ -1514,38 +1533,15 @@ config 64BIT_PHYS_ADDR bool "Support for 64-bit physical address space" depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT -config CPU_ADVANCED - bool "Override CPU Options" - depends on 32BIT - help - Saying yes here allows you to select support for various features - your CPU may or may not have. Most people should say N here. - config CPU_HAS_LLSC - bool "ll/sc Instructions available" if CPU_ADVANCED - default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX - help - MIPS R4000 series and later provide the Load Linked (ll) - and Store Conditional (sc) instructions. More information is - available at . - - Say Y here if your CPU has the ll and sc instructions. Say Y here - for better performance, N if you don't know. You must say Y here - for multiprocessor machines. + bool config CPU_HAS_WB - bool "Writeback Buffer available" if CPU_ADVANCED - default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION - help - Say N here for slightly better performance. You must say Y here for - machines which require flushing of write buffers in software. Saying - Y is the safe option; N may result in kernel malfunction and crashes. - -menu "MIPSR2 Interrupt handling" - depends on CPU_MIPSR2 && CPU_ADVANCED + bool config CPU_MIPSR2_IRQ_VI bool "Vectored interrupt mode" + depends on CPU_MIPSR2 help Vectored interrupt mode allowing faster dispatching of interrupts. The board support code needs to be written to take advantage of this @@ -1555,6 +1551,7 @@ config CPU_MIPSR2_IRQ_VI config CPU_MIPSR2_IRQ_EI bool "External interrupt controller mode" + depends on CPU_MIPSR2 help Extended interrupt mode takes advantage of an external interrupt controller to allow fast dispatching from many possible interrupt @@ -1568,7 +1565,6 @@ config CPU_MIPSR2_SRS Allow the kernel to use shadow register sets for fast interrupts. Interrupt handlers must be specially written to use shadow sets. Say N unless you know that shadow register set upport is needed. -endmenu config CPU_HAS_SYNC bool From b775565952ab8f33a49bfcb2c6dcfaba1e82dee3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 24 Apr 2006 15:00:59 +0100 Subject: [PATCH 116/160] [MIPS] Update MIPS defconfigs. Signed-off-by: Ralf Baechle --- arch/mips/configs/atlas_defconfig | 83 ++++--- arch/mips/configs/bigsur_defconfig | 64 +++-- arch/mips/configs/capcella_defconfig | 143 ++++++----- arch/mips/configs/cobalt_defconfig | 68 +++-- arch/mips/configs/db1000_defconfig | 70 ++++-- arch/mips/configs/db1100_defconfig | 71 ++++-- arch/mips/configs/db1200_defconfig | 68 +++-- arch/mips/configs/db1500_defconfig | 105 ++++---- arch/mips/configs/db1550_defconfig | 73 ++++-- arch/mips/configs/ddb5476_defconfig | 69 ++++-- arch/mips/configs/ddb5477_defconfig | 67 +++-- arch/mips/configs/decstation_defconfig | 69 ++++-- arch/mips/configs/e55_defconfig | 288 ++++------------------ arch/mips/configs/ev64120_defconfig | 67 +++-- arch/mips/configs/ev96100_defconfig | 64 +++-- arch/mips/configs/ip22_defconfig | 77 +++--- arch/mips/configs/ip27_defconfig | 54 ++-- arch/mips/configs/ip32_defconfig | 67 +++-- arch/mips/configs/it8172_defconfig | 66 +++-- arch/mips/configs/ivr_defconfig | 67 +++-- arch/mips/configs/jaguar-atx_defconfig | 56 +++-- arch/mips/configs/jmr3927_defconfig | 72 ++++-- arch/mips/configs/lasat200_defconfig | 69 ++++-- arch/mips/configs/malta_defconfig | 86 ++++--- arch/mips/configs/mipssim_defconfig | 64 +++-- arch/mips/configs/mpc30x_defconfig | 95 ++++--- arch/mips/configs/ocelot_3_defconfig | 72 ++++-- arch/mips/configs/ocelot_c_defconfig | 66 +++-- arch/mips/configs/ocelot_defconfig | 64 +++-- arch/mips/configs/ocelot_g_defconfig | 66 +++-- arch/mips/configs/pb1100_defconfig | 70 ++++-- arch/mips/configs/pb1500_defconfig | 73 ++++-- arch/mips/configs/pb1550_defconfig | 73 ++++-- arch/mips/configs/pnx8550-jbs_defconfig | 76 +++--- arch/mips/configs/pnx8550-v2pci_defconfig | 85 ++++--- arch/mips/configs/qemu_defconfig | 48 ++-- arch/mips/configs/rbhma4500_defconfig | 95 ++++--- arch/mips/configs/rm200_defconfig | 131 ++++++---- arch/mips/configs/sb1250-swarm_defconfig | 63 +++-- arch/mips/configs/sead_defconfig | 50 ++-- arch/mips/configs/tb0226_defconfig | 218 +++++++--------- arch/mips/configs/tb0229_defconfig | 282 +++++++-------------- arch/mips/configs/tb0287_defconfig | 104 +++++--- arch/mips/configs/workpad_defconfig | 185 +++++++------- arch/mips/configs/yosemite_defconfig | 54 ++-- arch/mips/defconfig | 77 +++--- 46 files changed, 2321 insertions(+), 1773 deletions(-) diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index 9e1ae953e966..4b080bcb258f 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:52 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:55 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_ATLAS=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -127,11 +129,11 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -149,7 +151,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -165,6 +166,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -178,10 +180,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -193,7 +191,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -202,6 +199,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -221,7 +220,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -249,6 +247,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -281,6 +280,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -322,9 +322,12 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -348,11 +351,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m @@ -376,20 +382,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -407,6 +412,7 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -427,12 +433,10 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -478,6 +482,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m @@ -492,11 +501,6 @@ CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -556,6 +560,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -694,9 +701,8 @@ CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -715,6 +721,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID5=m +CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -921,6 +928,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -930,6 +938,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -987,10 +996,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -1022,6 +1027,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -1038,15 +1044,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -1120,7 +1144,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1140,7 +1163,6 @@ CONFIG_VXFS_FS=m # CONFIG_QNX4FS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set # # Network File Systems @@ -1232,6 +1254,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 32984100a75e..d85cda58d650 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:53 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:55 2006 # CONFIG_MIPS=y @@ -80,6 +80,8 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_SB1250_PROF is not set # CONFIG_SIBYTE_TBPROF is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y @@ -154,7 +156,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -172,6 +173,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -186,10 +188,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -201,7 +199,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -210,6 +207,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -230,7 +228,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_DEBUG=y CONFIG_MMU=y @@ -249,6 +246,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_BUILD_ELF64=y CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -263,6 +261,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -284,12 +283,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -301,6 +303,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -310,11 +317,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -377,7 +379,7 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -575,6 +577,7 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -637,7 +640,6 @@ CONFIG_I2C_ALGO_SIBYTE=y # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set CONFIG_I2C_SIBYTE=y -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -656,9 +658,7 @@ CONFIG_SENSORS_EEPROM=y CONFIG_SENSORS_PCF8574=y CONFIG_SENSORS_PCA9539=y CONFIG_SENSORS_PCF8591=y -CONFIG_SENSORS_RTC8564=y CONFIG_SENSORS_MAX6875=y -# CONFIG_RTC_X1205_I2C is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y @@ -685,10 +685,6 @@ CONFIG_I2C_DEBUG_CHIP=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -714,6 +710,7 @@ CONFIG_I2C_DEBUG_CHIP=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -730,15 +727,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -785,7 +800,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 6c2961affbd6..ca0af1683a00 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:54 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:08:06 2006 # CONFIG_MIPS=y @@ -72,6 +72,8 @@ CONFIG_ZAO_CAPCELLA=y CONFIG_PCI_VR41XX=y # CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -90,7 +92,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -103,18 +105,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -135,7 +140,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -151,6 +155,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -164,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -179,7 +180,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -187,6 +187,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -206,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -224,6 +226,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking @@ -233,6 +236,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -255,12 +259,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -272,6 +279,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -281,11 +293,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -302,10 +309,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -348,10 +352,12 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -578,6 +584,11 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -601,6 +612,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Ftape, the floppy tape device driver # # CONFIG_DRM is not set +CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # @@ -635,10 +647,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -670,6 +678,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -686,15 +695,50 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_VR41XX=y +# CONFIG_RTC_DRV_TEST is not set + # # File systems # @@ -712,7 +756,7 @@ CONFIG_EXT2_FS=y CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m @@ -735,10 +779,9 @@ CONFIG_FUSE_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -805,44 +848,20 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -852,8 +871,6 @@ CONFIG_CRYPTO_CRC32C=m # Library routines # # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +# CONFIG_LIBCRC32C is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 8336b21d3db2..7d269e609282 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:55 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:57 2006 # CONFIG_MIPS=y @@ -63,7 +63,10 @@ CONFIG_MIPS_COBALT=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_EARLY_PRINTK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -113,7 +116,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -135,7 +137,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -151,6 +152,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -164,10 +166,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,6 +180,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -201,7 +201,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -229,6 +228,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -247,12 +247,15 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -264,6 +267,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -273,11 +281,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -298,6 +301,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -343,7 +349,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -593,6 +599,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -602,6 +609,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -659,10 +667,6 @@ CONFIG_COBALT_LCD=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -694,6 +698,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -710,15 +715,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -765,7 +788,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -828,6 +850,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 7f071403c8e3..579b665e3339 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:56 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:57 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_DB1000=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -152,6 +153,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -165,10 +167,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +179,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -190,6 +187,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -245,6 +244,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -267,7 +267,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -278,6 +279,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -294,10 +297,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -321,6 +327,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -330,11 +341,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -356,6 +362,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -412,7 +421,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -434,7 +442,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -471,7 +478,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -721,10 +728,6 @@ CONFIG_SYNCLINK_CS=m # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -756,6 +759,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set # @@ -772,14 +776,32 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -836,7 +858,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -945,6 +966,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 98590cac1ec5..e5eb53867422 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:57 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:58 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_DB1100=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -152,6 +153,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -165,10 +167,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +179,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -190,6 +187,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -234,6 +233,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -256,7 +256,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -267,6 +268,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -283,10 +286,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -310,6 +316,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -319,11 +330,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -345,6 +351,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -401,7 +410,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -423,7 +431,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -460,7 +467,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -689,10 +696,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -711,6 +714,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set @@ -755,6 +759,7 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set # @@ -771,14 +776,32 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -835,7 +858,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -944,6 +966,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 92888472dca0..a43fb2329fd5 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:58 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:58 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_DB1200=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_COHERENT=y CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y @@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +154,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -191,6 +188,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -244,6 +243,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -263,7 +263,8 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -274,6 +275,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -288,10 +291,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -315,6 +321,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -324,11 +335,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -403,7 +409,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -425,7 +430,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -762,10 +766,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -784,6 +784,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set @@ -794,6 +795,7 @@ CONFIG_FB_AU1200=y # Console display driver support # CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set @@ -816,6 +818,7 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -832,6 +835,7 @@ CONFIG_USB_GADGET=m # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUALSPEED is not set @@ -843,14 +847,32 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK=y CONFIG_MMC_AU1X=y +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -913,7 +935,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1027,6 +1048,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=48M" diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 5a415b1d4af0..ad632d87c4ef 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:59 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:59 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_DB1500=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -116,11 +118,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -138,7 +140,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +155,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -183,7 +181,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -192,6 +189,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -211,7 +210,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -253,6 +251,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -275,7 +274,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -286,6 +286,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -302,10 +304,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -329,6 +334,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -338,11 +348,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -364,6 +369,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -420,7 +428,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -443,7 +450,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -486,7 +492,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -714,6 +720,7 @@ CONFIG_SERIO_RAW=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -725,6 +732,7 @@ CONFIG_SERIAL_8250_AU1X00=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -789,10 +797,6 @@ CONFIG_SYNCLINK_CS=m # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -802,6 +806,7 @@ CONFIG_SYNCLINK_CS=m # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -825,9 +830,11 @@ CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -846,6 +853,7 @@ CONFIG_SND_MTPAV=m # PCI devices # # CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -877,6 +885,7 @@ CONFIG_SND_MTPAV=m # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -905,34 +914,22 @@ CONFIG_SND_AU1X00=m # Open Sound System # CONFIG_SOUND_PRIME=y -CONFIG_OBSOLETE_OSS_DRIVER=y # CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_CS4281 is not set -# CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set -# CONFIG_SOUND_ESSSOLO1 is not set -# CONFIG_SOUND_MAESTRO is not set -# CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_SONICVIBES is not set -# CONFIG_SOUND_AU1000 is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set -# CONFIG_SOUND_ALI5455 is not set -# CONFIG_SOUND_FORTE is not set -# CONFIG_SOUND_RME96XX is not set -# CONFIG_SOUND_AD1980 is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -958,7 +955,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -985,9 +981,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set CONFIG_USB_YEALINK=m # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1000,15 +994,6 @@ CONFIG_USB_YEALINK=m # # CONFIG_USB_MDC800 is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -1058,15 +1043,33 @@ CONFIG_USB_LD=m # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -1123,7 +1126,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1232,6 +1234,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 8dc1f18badfe..8130e23dc255 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:00 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:00 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_DB1550=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -115,11 +117,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -137,7 +139,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +154,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -191,6 +188,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -210,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -252,6 +250,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -274,7 +273,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -285,6 +285,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -301,10 +303,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -328,6 +333,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -337,11 +347,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -363,6 +368,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -419,7 +427,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -442,7 +449,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -489,7 +495,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -754,6 +760,7 @@ CONFIG_SERIO_RAW=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -765,6 +772,7 @@ CONFIG_SERIAL_8250_AU1X00=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -829,10 +837,6 @@ CONFIG_SYNCLINK_CS=m # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -858,6 +862,7 @@ CONFIG_SYNCLINK_CS=m # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -874,15 +879,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -939,7 +962,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1048,6 +1070,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig index 8fae63e47e5e..8d88ac1bbfeb 100644 --- a/arch/mips/configs/ddb5476_defconfig +++ b/arch/mips/configs/ddb5476_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:02 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:00 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_DDB5476=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,7 +116,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -136,7 +137,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -152,6 +152,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -165,10 +166,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -183,6 +180,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -202,7 +201,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_ISA=y CONFIG_MMU=y @@ -231,6 +229,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -252,12 +251,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -269,6 +271,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -278,11 +285,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -303,6 +305,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -348,7 +353,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -571,6 +576,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -580,6 +586,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -637,10 +644,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -659,6 +662,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -670,7 +674,6 @@ CONFIG_FB=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set @@ -708,6 +711,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -724,15 +728,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -776,7 +798,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -840,6 +861,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="ip=any" diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index a0fcd44e7709..8c911b671415 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:02 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:01 2006 # CONFIG_MIPS=y @@ -65,6 +65,8 @@ CONFIG_DDB5477=y # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_DDB5477_BUS_FREQUENCY=0 CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,7 +116,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -136,7 +137,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -152,6 +152,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -165,10 +166,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -183,6 +180,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -202,7 +201,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -230,6 +228,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -251,12 +250,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -268,6 +270,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -277,11 +284,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -302,6 +304,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -346,7 +351,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -556,6 +561,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -565,6 +571,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -622,10 +629,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -657,6 +660,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -673,15 +677,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -725,7 +747,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -792,6 +813,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="ip=any" diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 5a181eadd437..d838496e114f 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:03 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:01 2006 # CONFIG_MIPS=y @@ -63,11 +63,13 @@ CONFIG_MACH_DECSTATION=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_EARLY_PRINTK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_EARLY_PRINTK=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y @@ -113,7 +115,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_WB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -135,7 +136,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -151,6 +151,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -165,10 +166,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -180,7 +177,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -189,6 +185,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -233,11 +231,10 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -254,12 +251,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -271,6 +271,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -280,11 +285,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -305,6 +305,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -345,7 +348,7 @@ CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -566,10 +569,6 @@ CONFIG_RTC=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -588,6 +587,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set @@ -617,6 +617,7 @@ CONFIG_LOGO_DEC_CLUT224=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -632,14 +633,32 @@ CONFIG_LOGO_DEC_CLUT224=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -686,7 +705,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -705,7 +723,6 @@ CONFIG_RELAYFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=y -CONFIG_UFS_FS_WRITE=y # # Network File Systems diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 8fbfc06a6a2a..0760f4318910 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:04 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:08:20 2006 # CONFIG_MIPS=y @@ -70,6 +70,8 @@ CONFIG_CASIO_E55=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -88,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -101,18 +103,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -133,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -144,11 +148,10 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -162,10 +165,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -177,7 +176,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -185,6 +183,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -219,85 +220,12 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_NET is not set # # Device Drivers @@ -313,7 +241,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Connector - unified userspace <-> kernelspace linker # -CONFIG_CONNECTOR=m # # Memory Technology Devices (MTD) @@ -335,11 +262,11 @@ CONFIG_CONNECTOR=m # # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -397,82 +324,9 @@ CONFIG_IDE_GENERIC=y # I2O device support # -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - # # ISDN subsystem # -# CONFIG_ISDN is not set # # Telephony Support @@ -508,11 +362,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # @@ -531,6 +381,10 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -565,6 +419,7 @@ CONFIG_WATCHDOG=y # # Ftape, the floppy tape device driver # +CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # @@ -599,10 +454,6 @@ CONFIG_WATCHDOG=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -611,7 +462,6 @@ CONFIG_WATCHDOG=y # # Digital Video Broadcasting Devices # -# CONFIG_DVB is not set # # Graphics support @@ -635,6 +485,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -650,14 +501,32 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -669,13 +538,12 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m @@ -698,10 +566,9 @@ CONFIG_FUSE_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -721,29 +588,6 @@ CONFIG_RELAYFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# -# Network File Systems -# -CONFIG_NFS_FS=m -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=m -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - # # Partition Types # @@ -767,44 +611,20 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyVR0,19200 mem=8M" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -814,8 +634,6 @@ CONFIG_CRYPTO_CRC32C=m # Library routines # # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +# CONFIG_CRC16 is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig index f2d43be69007..7067f608b22c 100644 --- a/arch/mips/configs/ev64120_defconfig +++ b/arch/mips/configs/ev64120_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:05 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:02 2006 # CONFIG_MIPS=y @@ -65,6 +65,8 @@ CONFIG_MIPS_EV64120=y # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_EVB_PCI1 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -116,7 +118,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -138,7 +139,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +154,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,7 +179,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_KMOD is not set @@ -191,6 +187,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -210,7 +208,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -238,6 +235,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -258,12 +256,15 @@ CONFIG_IP_PNP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -275,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -284,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -309,6 +310,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -352,7 +356,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -550,6 +554,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -559,6 +564,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -616,10 +622,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -651,6 +653,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -667,15 +670,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -719,7 +740,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -783,6 +803,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::" diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig index ac5841c4b698..00b56ed0e638 100644 --- a/arch/mips/configs/ev96100_defconfig +++ b/arch/mips/configs/ev96100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:06 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:03 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_EV96100=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -119,7 +121,6 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -142,7 +143,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -158,6 +158,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -171,10 +172,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -186,7 +183,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_KMOD is not set @@ -195,6 +191,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -240,6 +238,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -260,12 +259,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -277,6 +279,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -286,11 +293,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -311,6 +313,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -349,7 +354,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -566,10 +571,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -601,6 +602,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -616,14 +618,32 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -667,7 +687,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -731,6 +750,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 42d5cd7927cb..607e2985ffe3 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:51 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:54 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_SGI_IP22=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y @@ -121,7 +123,6 @@ CONFIG_BOARD_SCACHE=y CONFIG_IP22_CPU_SCACHE=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -143,7 +144,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -160,6 +160,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -173,10 +174,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -188,7 +185,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -197,6 +193,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -242,6 +240,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -264,6 +263,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -305,9 +305,12 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -330,11 +333,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -357,20 +363,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -388,6 +393,7 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -408,12 +414,10 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -435,6 +439,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -444,11 +453,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -508,6 +512,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -546,7 +553,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -811,10 +818,6 @@ CONFIG_MAX_RAW_DEVS=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -857,6 +860,7 @@ CONFIG_LOGO_SGI_CLUT224=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -872,14 +876,32 @@ CONFIG_LOGO_SGI_CLUT224=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -944,7 +966,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -963,7 +984,6 @@ CONFIG_EFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set # # Network File Systems @@ -1078,6 +1098,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 8c40590737e1..f724b4b2ecf2 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc4 -# Tue Feb 21 13:44:31 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:04 2006 # CONFIG_MIPS=y @@ -70,6 +70,8 @@ CONFIG_NUMA=y # CONFIG_REPLICATE_KTEXT is not set # CONFIG_REPLICATE_EXHANDLERS is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARC=y CONFIG_DMA_IP27=y @@ -123,6 +125,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_NODES_SHIFT=6 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set CONFIG_DISCONTIGMEM_MANUAL=y @@ -162,6 +165,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -175,10 +179,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -190,7 +190,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -199,6 +198,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -219,7 +219,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -237,6 +236,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -274,12 +274,15 @@ CONFIG_IP_PNP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -363,6 +366,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -407,7 +413,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -473,7 +479,6 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -491,6 +496,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m CONFIG_MD_RAID5=y +CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -654,6 +660,7 @@ CONFIG_SERIO_RAW=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y @@ -726,10 +733,6 @@ CONFIG_SGI_IP27_RTC=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -755,6 +758,7 @@ CONFIG_SGI_IP27_RTC=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -771,18 +775,32 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # -# EDAC - error detection and reporting (RAS) +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -840,7 +858,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -922,6 +939,7 @@ CONFIG_SGI_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 7fdcaf51face..8f11d3565b2d 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:09 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:05 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_SGI_IP32=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARC=y CONFIG_DMA_IP32=y @@ -142,7 +144,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -159,6 +160,7 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -172,10 +174,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -189,6 +187,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -208,7 +207,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -226,6 +224,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y +# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -240,6 +239,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -261,12 +261,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -278,6 +281,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -287,11 +295,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -312,6 +315,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -357,7 +363,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -428,7 +434,6 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -615,6 +620,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -624,6 +630,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -681,10 +688,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -716,6 +719,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -732,15 +736,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -784,7 +806,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -861,6 +882,8 @@ CONFIG_SGI_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig index c716996d9eca..757adf23853d 100644 --- a/arch/mips/configs/it8172_defconfig +++ b/arch/mips/configs/it8172_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:10 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:05 2006 # CONFIG_MIPS=y @@ -65,6 +65,8 @@ CONFIG_MIPS_ITE8172=y # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_IT8172_REVC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -115,7 +117,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -137,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +154,7 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -183,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -192,6 +188,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -237,6 +235,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -258,12 +257,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -275,6 +277,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -284,11 +291,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -309,6 +311,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -387,7 +392,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -424,7 +428,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -665,10 +669,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -704,7 +704,6 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y -# CONFIG_OBSOLETE_OSS_DRIVER is not set CONFIG_SOUND_IT8172=y # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set @@ -714,6 +713,7 @@ CONFIG_SOUND_IT8172=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -729,14 +729,32 @@ CONFIG_SOUND_IT8172=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -780,7 +798,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -846,6 +863,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig index a8376d125e11..021761a8a237 100644 --- a/arch/mips/configs/ivr_defconfig +++ b/arch/mips/configs/ivr_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:11 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:06 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_IVR=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -112,7 +114,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -134,7 +135,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -151,6 +151,7 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -164,10 +165,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -179,7 +176,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -188,6 +184,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -207,7 +205,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -235,6 +232,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -256,12 +254,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -273,6 +274,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -282,11 +288,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -307,6 +308,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -350,7 +354,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -565,6 +569,7 @@ CONFIG_IT8172_SCR1=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -574,6 +579,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -630,10 +636,6 @@ CONFIG_RTC=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -665,6 +667,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -681,15 +684,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -733,7 +754,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -797,6 +817,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig index 316015379dbc..08f6c30b0abc 100644 --- a/arch/mips/configs/jaguar-atx_defconfig +++ b/arch/mips/configs/jaguar-atx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:12 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:06 2006 # CONFIG_MIPS=y @@ -65,6 +65,8 @@ CONFIG_MOMENCO_JAGUAR_ATX=y # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_JAGUAR_DMALOW=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -122,7 +124,6 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -144,7 +145,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # # CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -160,6 +160,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y @@ -172,10 +173,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -186,7 +183,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -195,6 +191,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -214,7 +212,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -241,6 +238,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -260,16 +258,19 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set @@ -338,10 +339,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m # @@ -423,6 +423,7 @@ CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=y # CONFIG_E100 is not set @@ -446,6 +447,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -514,6 +516,7 @@ CONFIG_MV643XX_ETH_2=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -523,6 +526,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -578,10 +582,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -607,6 +607,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -623,13 +624,30 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # # @@ -672,7 +690,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # # Miscellaneous filesystems @@ -718,6 +735,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 53fbef1ac25d..38b1e026e10d 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:13 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:07 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_TOSHIBA_JMR3927=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -111,7 +113,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -133,7 +134,6 @@ CONFIG_RTC_DS1742=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -149,6 +149,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -162,10 +163,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -180,6 +177,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -199,7 +198,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -227,6 +225,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -248,12 +247,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -265,6 +267,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -274,11 +281,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -299,6 +301,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -343,7 +348,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -551,7 +556,12 @@ CONFIG_SERIAL_NONSTANDARD=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_TXX9=y CONFIG_HAS_TXX9_SERIAL=y +# CONFIG_SERIAL_TXX9_CONSOLE is not set +# CONFIG_SERIAL_TXX9_STDSERIAL is not set +# CONFIG_SERIAL_JSM is not set # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -609,10 +619,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -631,6 +637,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -642,7 +649,6 @@ CONFIG_FB=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set @@ -679,6 +685,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -695,15 +702,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -745,7 +770,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -809,6 +833,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig index ef0fa9fc79d6..4d25990a0a05 100644 --- a/arch/mips/configs/lasat200_defconfig +++ b/arch/mips/configs/lasat200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:14 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:07 2006 # CONFIG_MIPS=y @@ -68,6 +68,8 @@ CONFIG_PICVUE_PROC=y CONFIG_DS1603=y CONFIG_LASAT_SYSCTL=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -119,7 +121,6 @@ CONFIG_BOARD_SCACHE=y CONFIG_R5000_CPU_SCACHE=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -141,7 +142,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -157,6 +157,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -170,10 +171,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -186,7 +183,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -195,6 +191,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -214,7 +212,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -242,6 +239,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -259,12 +257,15 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -276,6 +277,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -285,11 +291,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -310,6 +311,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -366,7 +370,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -389,7 +392,6 @@ CONFIG_MTD_LASAT=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -430,7 +432,7 @@ CONFIG_MTD_LASAT=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -672,6 +674,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -681,6 +684,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -738,10 +742,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -773,6 +773,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -789,15 +790,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -847,7 +866,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -914,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 367d279efdd9..977f52be51dc 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:15 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:08 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_MALTA=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMA_NONCOHERENT=y @@ -128,16 +130,21 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT=y +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set CONFIG_MIPS_VPE_LOADER=y +CONFIG_MIPS_MT_FPAFF=y CONFIG_MIPS_VPE_LOADER_TOM=y CONFIG_MIPS_VPE_APSP_API=y +CONFIG_MIPS_APSP_KSPD=y # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y +# CONFIG_CPU_MIPSR2_IRQ_VI is not set +# CONFIG_CPU_MIPSR2_IRQ_EI is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -155,7 +162,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -171,6 +177,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -184,10 +191,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -199,7 +202,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -208,6 +210,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -227,7 +231,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -255,6 +258,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -287,6 +291,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -328,9 +333,12 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -354,11 +362,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m @@ -382,20 +393,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -413,6 +423,7 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -433,12 +444,10 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -484,6 +493,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m @@ -498,11 +512,6 @@ CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -562,6 +571,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -734,7 +746,6 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -753,6 +764,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID5=m +CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -956,6 +968,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -965,6 +978,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -1021,10 +1035,6 @@ CONFIG_RTC=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -1056,6 +1066,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -1072,15 +1083,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -1154,7 +1183,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1174,7 +1202,6 @@ CONFIG_VXFS_FS=m # CONFIG_QNX4FS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set # # Network File Systems @@ -1266,6 +1293,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index fe78961762b8..00560e0143f1 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:16 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:09 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_SIM=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,16 +116,19 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT=y +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set CONFIG_MIPS_VPE_LOADER=y +CONFIG_MIPS_MT_FPAFF=y CONFIG_MIPS_VPE_LOADER_TOM=y CONFIG_MIPS_VPE_APSP_API=y +CONFIG_MIPS_APSP_KSPD=y # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -141,7 +146,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -157,6 +161,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -171,10 +176,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -186,7 +187,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -195,6 +195,7 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -238,6 +239,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -268,12 +270,15 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -290,6 +295,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -299,11 +309,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -397,7 +402,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -532,7 +537,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -595,10 +600,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -624,6 +625,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -639,14 +641,32 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -690,8 +710,6 @@ CONFIG_PROC_FS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set -# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index e4620e7f0a5e..286a018375b2 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:17 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:09 2006 # CONFIG_MIPS=y @@ -72,6 +72,8 @@ CONFIG_VICTOR_MPC30X=y CONFIG_PCI_VR41XX=y CONFIG_VRC4173=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -90,7 +92,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -103,18 +105,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -135,7 +140,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -151,6 +155,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -164,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -179,7 +180,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -187,6 +187,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -206,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -225,6 +227,7 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set +# CONFIG_PCMCIA_VRC4173 is not set # # PCI Hotplug Support @@ -236,6 +239,7 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking @@ -245,6 +249,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -264,12 +269,15 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -281,6 +289,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -290,11 +303,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -316,6 +324,9 @@ CONFIG_IEEE80211=m CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -360,7 +371,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m @@ -475,6 +486,7 @@ CONFIG_MII=m # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set # # Obsolete Wireless cards support (pre-802.11) @@ -513,6 +525,7 @@ CONFIG_PCMCIA_HERMES=m # # CONFIG_PRISM54 is not set # CONFIG_HOSTAP is not set +# CONFIG_BCM43XX is not set CONFIG_NET_WIRELESS=y # @@ -604,6 +617,8 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +# CONFIG_SERIAL_VR41XX is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -634,6 +649,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_GPIO_VR41XX is not set # CONFIG_RAW_DRIVER is not set # @@ -668,10 +684,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -681,6 +693,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -703,6 +716,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -756,9 +770,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -771,15 +783,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_MDC800 is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -831,15 +834,33 @@ CONFIG_USB_PEGASUS=m # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -883,7 +904,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -946,6 +966,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,19200" diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index 925d8adef88d..1ce4310fd92a 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:18 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:10 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT_3=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -120,7 +122,6 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -144,7 +145,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -161,6 +161,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -174,10 +175,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -189,7 +186,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -198,6 +194,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -217,7 +215,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -245,6 +242,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -266,6 +264,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -278,9 +277,12 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y @@ -299,10 +301,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -332,6 +337,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -341,11 +351,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -367,6 +372,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -411,7 +419,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m @@ -475,7 +483,6 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -690,6 +697,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -699,6 +707,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -755,10 +764,6 @@ CONFIG_RTC=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -777,6 +782,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -788,7 +794,6 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set @@ -832,6 +837,7 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -848,15 +854,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -914,7 +938,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1025,6 +1048,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="ip=any root=nfs" diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig index ee1cf9b9eb9a..8a6aa5012f89 100644 --- a/arch/mips/configs/ocelot_c_defconfig +++ b/arch/mips/configs/ocelot_c_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:19 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:10 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT_C=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -139,7 +141,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -155,6 +156,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -168,10 +170,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -185,6 +183,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -204,7 +203,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -222,6 +220,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -236,6 +235,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -256,12 +256,15 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -273,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -282,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -307,6 +310,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -351,7 +357,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -542,6 +548,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -551,6 +558,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -608,10 +616,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -643,6 +647,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -659,15 +664,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -711,7 +734,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -778,6 +800,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig index d80ff278f2af..f9ee35eeb762 100644 --- a/arch/mips/configs/ocelot_defconfig +++ b/arch/mips/configs/ocelot_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:20 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:11 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -121,7 +123,6 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -144,7 +145,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -160,6 +160,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -173,10 +174,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -191,6 +188,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -236,6 +235,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -256,12 +256,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -273,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -282,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -307,6 +310,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -346,7 +352,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -562,10 +568,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -597,6 +599,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -612,14 +615,32 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -663,7 +684,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -730,6 +750,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig index c0f508d180c4..b48bdee2411f 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/ocelot_g_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:21 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:11 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT_G=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -142,7 +144,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -158,6 +159,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -171,10 +173,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -188,6 +186,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -207,7 +206,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -225,6 +223,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -239,6 +238,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -259,12 +259,15 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -276,6 +279,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -285,11 +293,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -310,6 +313,9 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_SOFTMAC=y +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -354,7 +360,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -545,6 +551,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -554,6 +561,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -611,10 +619,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -646,6 +650,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -662,15 +667,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -714,7 +737,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -781,6 +803,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 194b3c772bb7..01aac40634b4 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:22 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:12 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_PB1100=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -116,11 +118,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -138,7 +140,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +155,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -183,7 +181,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -192,6 +189,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -247,6 +246,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -269,7 +269,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -280,6 +281,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -296,10 +299,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -323,6 +329,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -332,11 +343,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -358,6 +364,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -414,7 +423,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -436,7 +444,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -473,7 +480,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -715,10 +722,6 @@ CONFIG_SYNCLINK_CS=m # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -750,6 +753,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set # @@ -766,14 +770,32 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -830,7 +852,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -939,6 +960,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 8985725e6a98..398c3c265b9f 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:24 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:13 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_PB1500=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -115,11 +117,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -137,7 +139,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +154,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -191,6 +188,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -210,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -253,6 +251,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -275,7 +274,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -286,6 +286,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -302,10 +304,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -329,6 +334,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -338,11 +348,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -364,6 +369,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -420,7 +428,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -443,7 +450,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -485,7 +491,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -750,6 +756,7 @@ CONFIG_SERIO_RAW=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -761,6 +768,7 @@ CONFIG_SERIAL_8250_AU1X00=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -825,10 +833,6 @@ CONFIG_SYNCLINK_CS=m # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -854,6 +858,7 @@ CONFIG_SYNCLINK_CS=m # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -870,15 +875,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -935,7 +958,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1044,6 +1066,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index adbf997b540e..ea282a53bb66 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:25 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:13 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_PB1550=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -115,11 +117,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set CONFIG_64BIT_PHYS_ADDR=y -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -137,7 +139,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +154,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -191,6 +188,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -210,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -253,6 +251,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -275,7 +274,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -286,6 +286,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -302,10 +304,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -329,6 +334,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -338,11 +348,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -364,6 +369,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -420,7 +428,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -443,7 +450,6 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -485,7 +491,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -742,6 +748,7 @@ CONFIG_SERIO_RAW=m # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -753,6 +760,7 @@ CONFIG_SERIAL_8250_AU1X00=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -817,10 +825,6 @@ CONFIG_SYNCLINK_CS=m # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -846,6 +850,7 @@ CONFIG_SYNCLINK_CS=m # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -862,15 +867,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -927,7 +950,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1036,6 +1058,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index b5db700450ba..4c57e564db0b 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:26 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:14 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_PNX8550_JBS=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +154,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +179,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -190,6 +187,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -209,7 +208,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_DEBUG is not set CONFIG_MMU=y @@ -238,6 +236,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -257,12 +256,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -274,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -283,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -469,7 +471,6 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -671,6 +672,7 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_IP3106 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -723,16 +725,13 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -742,6 +741,7 @@ CONFIG_HWMON=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -764,6 +764,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -827,9 +828,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -843,15 +842,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -901,15 +891,33 @@ CONFIG_USB_MON=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -956,7 +964,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1067,6 +1074,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SLAB_LEAK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index 4187287f0763..3c8f35162fec 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:28 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:14 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_PNX8550_V2PCI=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -114,12 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_ADVANCED=y CONFIG_CPU_HAS_LLSC=y -# CONFIG_CPU_HAS_WB is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -137,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +154,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +168,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +178,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -190,6 +186,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -209,7 +207,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set CONFIG_MMU=y # @@ -237,6 +234,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -256,6 +254,7 @@ CONFIG_IP_PNP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -268,9 +267,12 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y @@ -287,10 +289,12 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -320,6 +324,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -329,11 +338,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -521,7 +525,6 @@ CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -757,6 +760,7 @@ CONFIG_SERIAL_NONSTANDARD=y # Non-8250 serial port support # # CONFIG_SERIAL_IP3106 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -816,7 +820,6 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -835,9 +838,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -867,6 +868,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -900,10 +902,6 @@ CONFIG_HWMON=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -913,6 +911,7 @@ CONFIG_HWMON=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -922,6 +921,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -933,7 +933,6 @@ CONFIG_FB=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set @@ -970,6 +969,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1030,9 +1030,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1046,15 +1044,6 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -1105,15 +1094,33 @@ CONFIG_USB_MON=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -1171,7 +1178,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1280,6 +1286,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index 31f5afabafa8..4bcc01dea041 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Sun Feb 12 19:18:55 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:15 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_QEMU=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_COHERENT=y CONFIG_GENERIC_ISA_DMA=y @@ -115,16 +117,17 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_SMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -147,6 +150,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y @@ -159,10 +163,6 @@ CONFIG_ELF_CORE=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SHMEM is not set -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 @@ -177,6 +177,8 @@ CONFIG_BASE_SMALL=1 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -196,6 +198,7 @@ CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_ISA=y CONFIG_MMU=y +CONFIG_I8253=y # # PCCARD (PCMCIA/CardBus) support @@ -241,12 +244,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -308,7 +314,7 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -529,10 +535,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -552,6 +554,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Console display driver support # CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y @@ -565,6 +568,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -580,16 +584,29 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # -# EDAC - error detection and reporting (RAS) +# Real Time Clock # # @@ -632,7 +649,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # # Miscellaneous filesystems @@ -680,6 +696,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index b126f763cf51..3d441932e43a 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:30 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:16 2006 # CONFIG_MIPS=y @@ -71,6 +71,8 @@ CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -121,10 +123,9 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set -CONFIG_CPU_ADVANCED=y CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_WB=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -145,7 +146,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -162,6 +162,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -175,10 +176,6 @@ CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -190,7 +187,6 @@ CONFIG_OBSOLETE_INTERMODULE=y # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -199,6 +195,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -218,7 +216,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set CONFIG_ISA=y CONFIG_MMU=y @@ -247,6 +244,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -267,6 +265,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -279,9 +278,12 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y @@ -300,10 +302,12 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -333,6 +337,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -342,11 +351,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -369,6 +373,9 @@ CONFIG_IEEE80211=m CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -425,7 +432,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -447,7 +453,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -702,6 +707,7 @@ CONFIG_NET_PCI=y # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set # # Obsolete Wireless cards support (pre-802.11) @@ -715,6 +721,8 @@ CONFIG_NET_RADIO=y # # CONFIG_IPW2100 is not set CONFIG_IPW2200=m +# CONFIG_IPW2200_MONITOR is not set +# CONFIG_IPW_QOS is not set # CONFIG_IPW2200_DEBUG is not set # CONFIG_HERMES is not set # CONFIG_ATMEL is not set @@ -724,6 +732,7 @@ CONFIG_IPW2200=m # # CONFIG_PRISM54 is not set # CONFIG_HOSTAP is not set +# CONFIG_BCM43XX is not set CONFIG_NET_WIRELESS=y # @@ -821,7 +830,12 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_TXX9=y CONFIG_HAS_TXX9_SERIAL=y +# CONFIG_SERIAL_TXX9_CONSOLE is not set +# CONFIG_SERIAL_TXX9_STDSERIAL is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -874,16 +888,13 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -893,6 +904,7 @@ CONFIG_HWMON=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -902,6 +914,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -913,7 +926,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set CONFIG_FB_ATY=y @@ -934,6 +946,7 @@ CONFIG_FB_ATY_CT=y # Console display driver support # CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set @@ -954,6 +967,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1003,9 +1017,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set CONFIG_USB_YEALINK=m # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1018,15 +1030,6 @@ CONFIG_USB_YEALINK=m # # CONFIG_USB_MDC800 is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -1077,15 +1080,33 @@ CONFIG_USB_MON=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -1148,7 +1169,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1266,6 +1286,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 463ed3dbf6ae..edfb9679a25a 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:31 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:16 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_SNI_RM200_PCI=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARC=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y @@ -122,7 +124,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -145,7 +146,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -163,6 +163,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -176,10 +177,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -191,7 +188,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -200,6 +196,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -220,10 +218,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_EISA=y CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_ISA=y # CONFIG_EISA is not set CONFIG_MMU=y +CONFIG_I8253=y # # PCCARD (PCMCIA/CardBus) support @@ -250,6 +248,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -272,6 +271,7 @@ CONFIG_IP_PIMSM_V2=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -284,9 +284,12 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -309,11 +312,14 @@ CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m @@ -337,20 +343,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -368,6 +373,7 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -388,12 +394,10 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -439,21 +443,22 @@ CONFIG_BRIDGE_EBT_ULOG=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -CONFIG_BRIDGE=m -# CONFIG_VLAN_8021Q is not set -CONFIG_DECNET=m -# CONFIG_DECNET_ROUTER is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +# CONFIG_VLAN_8021Q is not set +CONFIG_DECNET=m +# CONFIG_DECNET_ROUTER is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -533,6 +538,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -620,6 +628,7 @@ CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -700,12 +709,11 @@ CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -731,6 +739,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID5=m +CONFIG_MD_RAID5_RESHAPE=y # CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -965,6 +974,7 @@ CONFIG_HW_CONSOLE=y # Serial drivers # CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_PCI=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y @@ -977,6 +987,7 @@ CONFIG_SERIAL_8250_RSA=y # Non-8250 serial port support # CONFIG_SERIAL_CORE=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -1027,12 +1038,19 @@ CONFIG_RTC=m # Dallas's 1-wire bus # CONFIG_W1=m -CONFIG_W1_MATROX=m -CONFIG_W1_DS9490=m -# CONFIG_W1_DS9490_BRIDGE is not set -CONFIG_W1_THERM=m -CONFIG_W1_SMEM=m -# CONFIG_W1_DS2433 is not set + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_MATROX is not set +# CONFIG_W1_MASTER_DS9490 is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set # # Hardware Monitoring support @@ -1044,10 +1062,6 @@ CONFIG_W1_SMEM=m # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -1057,6 +1071,7 @@ CONFIG_W1_SMEM=m # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +CONFIG_USB_DABUSB=m # # Graphics support @@ -1067,6 +1082,7 @@ CONFIG_W1_SMEM=m # Console display driver support # CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y @@ -1080,6 +1096,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -1151,9 +1168,7 @@ CONFIG_USB_WACOM=m # CONFIG_USB_ACECAD is not set CONFIG_USB_KBTAB=m CONFIG_USB_POWERMATE=m -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -CONFIG_USB_EGALAX=m +# CONFIG_USB_TOUCHSCREEN is not set CONFIG_USB_YEALINK=m CONFIG_USB_XPAD=m # CONFIG_USB_ATI_REMOTE is not set @@ -1167,15 +1182,6 @@ CONFIG_USB_XPAD=m CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m -# -# USB Multimedia devices -# -CONFIG_USB_DABUSB=m - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -1213,6 +1219,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m @@ -1237,6 +1244,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m @@ -1280,15 +1288,33 @@ CONFIG_USB_TEST=m # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -1358,7 +1384,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -1379,7 +1404,6 @@ CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set # # Network File Systems @@ -1500,6 +1524,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index da68c3f72050..e388a3dae0a9 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:32 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:17 2006 # CONFIG_MIPS=y @@ -81,6 +81,8 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_SB1250_PROF is not set # CONFIG_SIBYTE_TBPROF is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y @@ -158,7 +160,6 @@ CONFIG_PREEMPT_BKL=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -175,6 +176,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -188,10 +190,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -203,7 +201,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -212,6 +209,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -231,7 +229,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y CONFIG_MMU=y # @@ -249,6 +246,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y @@ -263,6 +261,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -284,12 +283,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -301,6 +303,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -310,11 +317,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -335,6 +337,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -589,6 +594,7 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -646,10 +652,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -675,6 +677,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -691,15 +694,33 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -746,7 +767,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -812,6 +832,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_SB1XXX_CORELIS is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 9a936d7b7c0c..6b8a6a416a25 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:33 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:17 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_MIPS_SEAD=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -118,11 +120,11 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -140,7 +142,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -154,6 +155,7 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -185,6 +183,8 @@ CONFIG_BASE_SMALL=0 # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -295,12 +295,6 @@ CONFIG_RAID_ATTRS=y # I2O device support # -# -# Network device support -# -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - # # ISDN subsystem # @@ -396,10 +390,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -424,6 +414,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -439,14 +430,32 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -489,7 +498,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -543,6 +551,8 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index c2dee0d1c72c..dba0bdcdcf29 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:34 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:08:41 2006 # CONFIG_MIPS=y @@ -68,12 +68,14 @@ CONFIG_MACH_VR41XX=y # CONFIG_NEC_CMBVR4133 is not set CONFIG_TANBAC_TB022X=y CONFIG_TANBAC_TB0226=y -CONFIG_TANBAC_TB0287=y +# CONFIG_TANBAC_TB0287 is not set # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y # CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -92,7 +94,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -105,18 +107,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -137,7 +142,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +157,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +171,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +182,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -189,6 +189,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -208,7 +211,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set CONFIG_MMU=y # @@ -226,6 +228,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking @@ -235,11 +238,10 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -263,12 +265,15 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -280,6 +285,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -289,11 +299,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -310,10 +315,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -358,11 +360,12 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -397,14 +400,14 @@ CONFIG_SCSI_MULTI_LUN=y # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # -CONFIG_ISCSI_TCP=m +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -424,7 +427,6 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -507,8 +509,8 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set @@ -625,6 +627,11 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -684,10 +691,6 @@ CONFIG_GPIO_VR41XX=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -697,6 +700,7 @@ CONFIG_GPIO_VR41XX=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -719,6 +723,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -756,7 +761,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # may also be needed; see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set @@ -783,9 +788,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -799,15 +802,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -816,7 +810,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y +# CONFIG_USB_MON is not set # # USB port drivers @@ -859,15 +853,50 @@ CONFIG_USB_MON=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_VR41XX=y +# CONFIG_RTC_DRV_TEST is not set + # # File systems # @@ -911,7 +940,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -952,9 +980,7 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp932" +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -970,46 +996,7 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_CODEPAGE_932=m -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +# CONFIG_NLS is not set # # Profiling support @@ -1023,44 +1010,20 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -1069,9 +1032,8 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig index be99261d7997..5a924c1a5803 100644 --- a/arch/mips/configs/tb0229_defconfig +++ b/arch/mips/configs/tb0229_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:35 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:08:59 2006 # CONFIG_MIPS=y @@ -68,12 +68,14 @@ CONFIG_MACH_VR41XX=y # CONFIG_NEC_CMBVR4133 is not set CONFIG_TANBAC_TB022X=y # CONFIG_TANBAC_TB0226 is not set -CONFIG_TANBAC_TB0287=y +# CONFIG_TANBAC_TB0287 is not set # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y # CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -92,7 +94,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -105,18 +107,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -137,7 +142,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -153,6 +157,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -166,10 +171,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -181,7 +182,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -189,6 +189,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -208,7 +211,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set CONFIG_MMU=y # @@ -226,6 +228,7 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking @@ -235,11 +238,10 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -264,12 +266,15 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -281,6 +286,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -290,11 +300,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -311,10 +316,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -325,12 +327,12 @@ CONFIG_IEEE80211_CRYPT_CCMP=m # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +# CONFIG_FW_LOADER is not set # # Connector - unified userspace <-> kernelspace linker # -CONFIG_CONNECTOR=m +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -363,10 +365,8 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -443,30 +443,7 @@ CONFIG_MII=y # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) @@ -483,7 +460,6 @@ CONFIG_R8169=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -510,19 +486,8 @@ CONFIG_R8169=y # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_PPP is not set +# CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -583,6 +548,11 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -607,6 +577,7 @@ CONFIG_TANBAC_TB0219=y # Ftape, the floppy tape device driver # # CONFIG_DRM is not set +CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # @@ -641,10 +612,6 @@ CONFIG_TANBAC_TB0219=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -654,6 +621,7 @@ CONFIG_TANBAC_TB0219=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -676,6 +644,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -731,9 +700,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -746,15 +713,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_MDC800 is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -806,47 +764,66 @@ CONFIG_USB_MON=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_VR41XX=y +# CONFIG_RTC_DRV_TEST is not set + # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y +# CONFIG_EXT3_FS is not set # CONFIG_REISERFS_FS is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_SECURITY is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set +# CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=y -# CONFIG_XFS_SECURITY is not set -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set +# CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y # CONFIG_QUOTA is not set -CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y @@ -855,20 +832,14 @@ CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y +# CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -880,7 +851,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -921,9 +891,7 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp932" +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -939,46 +907,7 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_CODEPAGE_932=m -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +# CONFIG_NLS is not set # # Profiling support @@ -992,44 +921,20 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -1038,9 +943,8 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 8a1e3ace0b2c..9f215ea350dc 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16 -# Wed Mar 22 11:07:34 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:09:17 2006 # CONFIG_MIPS=y @@ -74,7 +74,10 @@ CONFIG_TANBAC_TB0287=y CONFIG_PCI_VR41XX=y # CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -107,7 +110,6 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -121,7 +123,6 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -157,6 +158,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -170,10 +172,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -185,7 +183,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -194,6 +191,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -213,7 +212,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set CONFIG_MMU=y # @@ -245,8 +243,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -271,6 +267,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -288,6 +285,8 @@ CONFIG_TCP_CONG_HTCP=m # CONFIG_TCP_CONG_VEGAS is not set # CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -493,7 +492,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -714,7 +712,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set -# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -759,10 +756,6 @@ CONFIG_GPIO_VR41XX=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -772,17 +765,53 @@ CONFIG_GPIO_VR41XX=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_FB is not set +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +CONFIG_FB_SMIVGX=y +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VIRTUAL is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -794,6 +823,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -863,9 +893,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -879,15 +907,6 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -938,6 +957,19 @@ CONFIG_USB_MON=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # @@ -947,6 +979,11 @@ CONFIG_USB_MON=y # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -1001,7 +1038,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1067,14 +1103,14 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index 7132e296d40a..ac7765eb8da7 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:36 2006 +# Linux kernel version: 2.6.17-rc2 +# Tue Apr 25 00:09:33 2006 # CONFIG_MIPS=y @@ -70,6 +70,8 @@ CONFIG_IBM_WORKPAD=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -88,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set +CONFIG_CPU_VR41XX=y # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -101,18 +103,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_VR41XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set +CONFIG_32BIT=y # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -133,7 +138,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -149,6 +153,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -162,10 +167,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -177,7 +178,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -185,6 +185,9 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -220,6 +223,7 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_I82365 is not set # CONFIG_TCIC is not set CONFIG_PCMCIA_PROBE=y +CONFIG_PCMCIA_VRC4171=y # # PCI Hotplug Support @@ -230,6 +234,7 @@ CONFIG_PCMCIA_PROBE=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y # # Networking @@ -239,6 +244,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -258,12 +264,15 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -275,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -284,11 +298,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -305,10 +314,8 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211 is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -347,10 +354,12 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -468,7 +477,38 @@ CONFIG_MII=m # # Wireless LAN (non-hamradio) # -# CONFIG_NET_RADIO is not set +CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_ARLAN is not set +# CONFIG_WAVELAN is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y # # PCMCIA network device support @@ -512,10 +552,7 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set @@ -533,11 +570,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # @@ -556,6 +589,10 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -568,20 +605,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Watchdog Cards # -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# ISA-based Watchdog Cards -# -# CONFIG_PCWATCHDOG is not set -# CONFIG_MIXCOMWD is not set -# CONFIG_WDT is not set +# CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set @@ -597,6 +621,7 @@ CONFIG_WATCHDOG=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_GPIO_VR41XX is not set # CONFIG_RAW_DRIVER is not set # @@ -631,10 +656,6 @@ CONFIG_WATCHDOG=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -667,6 +688,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -682,14 +704,32 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -710,7 +750,7 @@ CONFIG_FS_POSIX_ACL=y CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m @@ -733,10 +773,9 @@ CONFIG_FUSE_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -802,44 +841,20 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyVR0,19200 mem=16M" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -849,8 +864,6 @@ CONFIG_CRYPTO_CRC32C=m # Library routines # # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +# CONFIG_LIBCRC32C is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 67457850941d..b52d709de962 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:40:37 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:51:20 2006 # CONFIG_MIPS=y @@ -65,6 +65,8 @@ CONFIG_PMC_YOSEMITE=y # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_HYPERTRANSPORT is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y @@ -116,7 +118,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -140,7 +141,6 @@ CONFIG_PREEMPT_BKL=y # Code maturity level options # # CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -157,6 +157,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y @@ -170,10 +171,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -184,7 +181,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -194,6 +190,8 @@ CONFIG_STOP_MACHINE=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -213,7 +211,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set CONFIG_MMU=y @@ -241,6 +238,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -261,16 +259,19 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set @@ -340,10 +341,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m # @@ -433,6 +433,7 @@ CONFIG_MII=y # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -497,6 +498,7 @@ CONFIG_TITAN_GE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -506,6 +508,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -562,10 +565,6 @@ CONFIG_GEN_RTC_X=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -591,6 +590,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -607,13 +607,30 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock # # @@ -656,7 +673,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # # Miscellaneous filesystems diff --git a/arch/mips/defconfig b/arch/mips/defconfig index 42d5cd7927cb..607e2985ffe3 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1 -# Fri Jan 27 15:39:51 2006 +# Linux kernel version: 2.6.17-rc2 +# Mon Apr 24 14:50:54 2006 # CONFIG_MIPS=y @@ -64,6 +64,8 @@ CONFIG_SGI_IP22=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y @@ -121,7 +123,6 @@ CONFIG_BOARD_SCACHE=y CONFIG_IP22_CPU_SCACHE=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -143,7 +144,6 @@ CONFIG_PREEMPT_VOLUNTARY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -160,6 +160,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -173,10 +174,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -188,7 +185,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -197,6 +193,8 @@ CONFIG_KMOD=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -242,6 +240,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -264,6 +263,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -305,9 +305,12 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -330,11 +333,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -357,20 +363,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -388,6 +393,7 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -408,12 +414,10 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -435,6 +439,11 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -444,11 +453,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -508,6 +512,9 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -546,7 +553,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -811,10 +818,6 @@ CONFIG_MAX_RAW_DEVS=256 # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -857,6 +860,7 @@ CONFIG_LOGO_SGI_CLUT224=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -872,14 +876,32 @@ CONFIG_LOGO_SGI_CLUT224=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -944,7 +966,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # @@ -963,7 +984,6 @@ CONFIG_EFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set # # Network File Systems @@ -1078,6 +1098,7 @@ CONFIG_NLS_UTF8=m # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" From 79e55bcf24ad8f31c3021b6ef21c4ce054fe4e38 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 24 Apr 2006 17:15:10 +0100 Subject: [PATCH 117/160] [MIPS] Cleanup inode->r_dev usage. imajor()/iminor() should be used instead of accessing r_dev directly. Based on patch from Eric Sesterhenn (snakebyte@gmx.de). Signed-off-by: Ralf Baechle --- arch/mips/kernel/rtlx.c | 11 +++++------ arch/mips/kernel/vpe.c | 6 +++--- 2 files changed, 8 insertions(+), 9 deletions(-) diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 6179805af9f0..caf777f83289 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -398,15 +398,14 @@ ssize_t rtlx_write(int index, void *buffer, size_t count, int user) static int file_open(struct inode *inode, struct file *filp) { - int minor = MINOR(inode->i_rdev); + int minor = iminor(inode); return rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1); } static int file_release(struct inode *inode, struct file *filp) { - int minor; - minor = MINOR(inode->i_rdev); + int minor = iminor(inode); return rtlx_release(minor); } @@ -416,7 +415,7 @@ static unsigned int file_poll(struct file *file, poll_table * wait) int minor; unsigned int mask = 0; - minor = MINOR(file->f_dentry->d_inode->i_rdev); + minor = iminor(file->f_dentry->d_inode); poll_wait(file, &channel_wqs[minor].rt_queue, wait); poll_wait(file, &channel_wqs[minor].lx_queue, wait); @@ -438,7 +437,7 @@ static unsigned int file_poll(struct file *file, poll_table * wait) static ssize_t file_read(struct file *file, char __user * buffer, size_t count, loff_t * ppos) { - int minor = MINOR(file->f_dentry->d_inode->i_rdev); + int minor = iminor(file->f_dentry->d_inode); /* data available? */ if (!rtlx_read_poll(minor, (file->f_flags & O_NONBLOCK) ? 0 : 1)) { @@ -455,7 +454,7 @@ static ssize_t file_write(struct file *file, const char __user * buffer, struct rtlx_channel *rt; DECLARE_WAITQUEUE(wait, current); - minor = MINOR(file->f_dentry->d_inode->i_rdev); + minor = iminor(file->f_dentry->d_inode); rt = &rtlx->channel[minor]; /* any space left... */ diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 80ffaa6d50ad..85d7df7b18e1 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1072,7 +1072,7 @@ static int vpe_open(struct inode *inode, struct file *filp) struct vpe_notifications *not; /* assume only 1 device at the mo. */ - if ((minor = MINOR(inode->i_rdev)) != 1) { + if ((minor = iminor(inode)) != 1) { printk(KERN_WARNING "VPE loader: only vpe1 is supported\n"); return -ENODEV; } @@ -1133,7 +1133,7 @@ static int vpe_release(struct inode *inode, struct file *filp) struct vpe *v; Elf_Ehdr *hdr; - minor = MINOR(inode->i_rdev); + minor = iminor(inode); if ((v = get_vpe(minor)) == NULL) return -ENODEV; @@ -1174,7 +1174,7 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer, size_t ret = count; struct vpe *v; - minor = MINOR(file->f_dentry->d_inode->i_rdev); + minor = iminor(file->f_dentry->d_inode); if ((v = get_vpe(minor)) == NULL) return -ENODEV; From ee1cca1b0661fa33fd99f2d8ec7e2749432f9b1d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 26 Apr 2006 21:33:03 +0100 Subject: [PATCH 118/160] [MIPS] Fix branch emulation for floating-point exceptions. In the branch emulation for floating-point exceptions, __compute_return_epc must determine for bc1f et al which condition code bit to test. This is based on bits <4:2> of the rt field. The switch statement to distinguish bc1f et al needs to use only the two low bits of rt, but the old code tests on the whole rt field. This patch masks off the proper bits. Signed-off-by: Win Treese Signed-off-by: Ralf Baechle --- arch/mips/kernel/branch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 374de839558d..b6232d9033cb 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -184,7 +184,7 @@ int __compute_return_epc(struct pt_regs *regs) bit = (insn.i_format.rt >> 2); bit += (bit != 0); bit += 23; - switch (insn.i_format.rt) { + switch (insn.i_format.rt & 3) { case 0: /* bc1f */ case 2: /* bc1fl */ if (~fcr31 & (1 << bit)) From 67ca0284f69992ad71ac12dc375f2b158d9d703d Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 23 Apr 2006 19:59:23 +0200 Subject: [PATCH 119/160] [PATCH] USB: Resource leak fix for whiteheat driver We may return from drivers/usb/serial/whiteheat.c::whiteheat_attach() without freeing `result' if we leave via the no_firmware: label. Spotted by the coverity checker as #670 Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/whiteheat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 557411c6e7c7..f806553cd9a4 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -508,6 +508,7 @@ no_firmware: err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); err("%s: please contact support@connecttech.com\n", serial->type->description); + kfree(result); return -ENODEV; no_command_private: From 58381719845d9ee19a321c2eb69cfa9b7886be9a Mon Sep 17 00:00:00 2001 From: Wang Jun Date: Wed, 19 Apr 2006 16:32:07 +0800 Subject: [PATCH 120/160] [PATCH] USB: add new iTegno usb CDMA 1x card support for pl2303 Add new iTegno usb CDMA 1x card (usbid '0eba:2080') support to pl2303 driver Signed-off-by: Wang Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index ccf746b27d4e..c96714bb1cb8 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -61,6 +61,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) }, { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) }, + { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) }, { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) }, { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 09f379b19e98..7f29e81d3e35 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -26,6 +26,7 @@ #define ITEGNO_VENDOR_ID 0x0eba #define ITEGNO_PRODUCT_ID 0x1080 +#define ITEGNO_PRODUCT_ID_2080 0x2080 #define MA620_VENDOR_ID 0x0df7 #define MA620_PRODUCT_ID 0x0620 From 2120638354a6881b9c442b10fc21f28ecadc7402 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sun, 16 Apr 2006 19:18:36 -0700 Subject: [PATCH 121/160] [PATCH] USB: Storage: unusual devs update This patch removes the Protocol portion of the Iomega Click! device as it's not needed. Not-needed message reported by Kenneth Crudup Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c4a9dcff5f2b..55cce575f6b0 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -411,7 +411,7 @@ UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133, UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100, "Iomega", "USB Clik! 40", - US_SC_8070, US_PR_BULK, NULL, + US_SC_8070, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), /* Yakumo Mega Image 37 From f430c405ca23dd5a9389d1f62dcdeb1fd6ce6024 Mon Sep 17 00:00:00 2001 From: Olivier Blondeau Date: Sun, 16 Apr 2006 19:19:25 -0700 Subject: [PATCH 122/160] [PATCH] USB: storage: atmel unusual dev update Originally submitted by Olivier Blondeau , with re-diffing by me. Adds a new atmel unusual_dev entry. Signed-off-by: Phil Dibowitz --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 55cce575f6b0..aec5ea8682d5 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -773,6 +773,13 @@ UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Olivier Blondeau */ +UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100, + "ATMEL", + "SND1 Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE), + /* Submitted by Roman Hodek */ UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, "Sandisk", From a29fccd7993a3d411674e148cb0759a017be3e21 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 14 Apr 2006 16:40:00 -0400 Subject: [PATCH 123/160] [PATCH] USB: net2280: Handle STALLs for 0-length control-IN requests This patch (as668) fixes a typo in net2280. The handler for 0-length control-IN requests should check that the endpoint _isn't_ halted before sending a 0-length packet. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/net2280.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 6a4b93ad1082..2d5cededcbd7 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2166,7 +2166,7 @@ static void handle_ep_small (struct net2280_ep *ep) ep->stopped = 1; set_halt (ep); mode = 2; - } else if (!req && ep->stopped) + } else if (!req && !ep->stopped) write_fifo (ep, NULL); } } else { From 317e83b842ba39776054219ae29844127876416a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 14 Apr 2006 16:42:03 -0400 Subject: [PATCH 124/160] [PATCH] USB: net2280: send 0-length packets for ep0 This patch (as669) fixes a bug in the net2280 driver. Now it will properly send zero-length packets on ep0 until the control status stage occurs. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/net2280.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 2d5cededcbd7..c842b194cf0f 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2280,9 +2280,7 @@ static void handle_ep_small (struct net2280_ep *ep) /* if we wrote it all, we're usually done */ if (req->req.actual == req->req.length) { if (ep->num == 0) { - /* wait for control status */ - if (mode != 2) - req = NULL; + /* send zlps until the status stage */ } else if (!req->req.zero || len != ep->ep.maxpacket) mode = 2; } From 658ad5e001a17be5fadaa8d57d1aa7f7c62628c1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 14 Apr 2006 16:44:11 -0400 Subject: [PATCH 125/160] [PATCH] USB: net2280: check for shared IRQs This patch (as670) adds a check for whether a shared IRQ was actually generated by the net2280 device. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/net2280.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index c842b194cf0f..b2d507f16b85 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2742,6 +2742,10 @@ static irqreturn_t net2280_irq (int irq, void *_dev, struct pt_regs * r) { struct net2280 *dev = _dev; + /* shared interrupt, not ours */ + if (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED))) + return IRQ_NONE; + spin_lock (&dev->lock); /* handle disconnect, dma, and more */ From 9fb81ce63671f9743517f628dac935269f2581a9 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 14 Apr 2006 16:46:28 -0400 Subject: [PATCH 126/160] [PATCH] USB: net2280: set driver data before it is used This patch (as671) fixes a bug in the error pathway for the net2280 probe routine. A failure during probe will cause the driver to call pci_get_drvdata before the corresponding pci_set_drvdata has been set. The patch also does a kzalloc conversion. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/net2280.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index b2d507f16b85..0b9293493957 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2833,13 +2833,13 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) } /* alloc, and start init */ - dev = kmalloc (sizeof *dev, SLAB_KERNEL); + dev = kzalloc (sizeof *dev, SLAB_KERNEL); if (dev == NULL){ retval = -ENOMEM; goto done; } - memset (dev, 0, sizeof *dev); + pci_set_drvdata (pdev, dev); spin_lock_init (&dev->lock); dev->pdev = pdev; dev->gadget.ops = &net2280_ops; @@ -2952,7 +2952,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff; /* done */ - pci_set_drvdata (pdev, dev); INFO (dev, "%s\n", driver_desc); INFO (dev, "irq %s, pci mem %p, chip rev %04x\n", bufp, base, dev->chiprev); From c67808eee61a01c3128298c5972426a1a67b9093 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 9 Apr 2006 20:07:35 +0200 Subject: [PATCH 127/160] [PATCH] USB: Use new PCI_CLASS_SERIAL_USB_* defines We could use the recently added PCI_CLASS_SERIAL_USB_UHCI, PCI_CLASS_SERIAL_USB_OHCI and PCI_CLASS_SERIAL_USB_EHCI defines in more places, for slightly shorter and clearer code. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/platforms/powermac/pci.c | 2 +- drivers/usb/host/ehci-pci.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/uhci-hcd.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index f5d8d15d74fa..ea179afea632 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1097,7 +1097,7 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial) * (iBook second controller) */ if (dev->vendor == PCI_VENDOR_ID_APPLE - && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) + && dev->class == PCI_CLASS_SERIAL_USB_OHCI && !node) { printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", pci_name(dev)); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 1e03f1a5a5fd..a1bd2bea6deb 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -350,7 +350,7 @@ static const struct hc_driver ehci_pci_hc_driver = { /* PCI driver selection metadata; PCI hotplugging uses this */ static const struct pci_device_id pci_ids [] = { { /* handle any USB 2.0 EHCI controller */ - PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0), + PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0), .driver_data = (unsigned long) &ehci_pci_hc_driver, }, { /* end: all zeroes */ } diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 1bfe96f4d045..b268537e389e 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -206,7 +206,7 @@ static const struct hc_driver ohci_pci_hc_driver = { static const struct pci_device_id pci_ids [] = { { /* handle any USB OHCI controller */ - PCI_DEVICE_CLASS((PCI_CLASS_SERIAL_USB << 8) | 0x10, ~0), + PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0), .driver_data = (unsigned long) &ohci_pci_hc_driver, }, { /* end: all zeroes */ } }; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index c0c4db78b590..d225e11f4055 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -858,7 +858,7 @@ static const struct hc_driver uhci_driver = { static const struct pci_device_id uhci_pci_ids[] = { { /* handle any USB UHCI controller */ - PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x00), ~0), + PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0), .driver_data = (unsigned long) &uhci_driver, }, { /* end: all zeroes */ } }; From cdd3b1565a8d563ed84cf1c2af6cabf461f3c317 Mon Sep 17 00:00:00 2001 From: Nathan Bronson Date: Mon, 10 Apr 2006 00:05:09 -0400 Subject: [PATCH 128/160] [PATCH] USB: ftdi_sio vendor code for RR-CirKits LocoBuffer USB This patch adds recognition of the RR-CirKits LocoBuffer USB to the existing FTDI driver. http://www.rr-cirkits.com Signed-off-by: Nathan Bronson Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f5851db67f5b..5eb646ee0979 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -493,6 +493,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) }, { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) }, { }, /* Optional parameter entry */ diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 2155f0e4a378..b6c50a16ef80 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -399,6 +399,11 @@ #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ +/* + * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + */ +#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ + /* * Eclo (http://www.eclo.pt/) product IDs. * PID 0xEA90 submitted by Martin Grill. From 69737dfaacd000b10fc4a1e9eb518b630b43c3ad Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Tue, 11 Apr 2006 15:52:41 -0300 Subject: [PATCH 129/160] [PATCH] USB: ftdi_sio: Adds support for iPlus device. Adds support in ftdi_sio usbserial driver for USB modems sold by Plus GSM Company in Poland. Signed-off-by: Luiz Fernando Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5eb646ee0979..20a9846e7b14 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -308,6 +308,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index b6c50a16ef80..7c31d59bf638 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -39,6 +39,9 @@ /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ +/* iPlus device */ +#define FTDI_IPLUS_PID 0xD070 /* Product Id */ + /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ /* they use the ftdi chipset for the USB interface and the vendor id is the same */ #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ From 7e0258fd28762c09b997edb56849ecfa29284b79 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 12 Apr 2006 15:20:35 +0100 Subject: [PATCH 130/160] [PATCH] USB: ftdi_sio: add support for ASK RDR 400 series card reader This patch adds support for an ASK RDR 400 series contactless card reader to the ftdi_sio driver's device ID table. The product ID was supplied by Adriano Couto on the ftdi-usb-sio-devel list. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 20a9846e7b14..82151207d814 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -495,6 +495,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) }, { }, /* Optional parameter entry */ diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 7c31d59bf638..2c55a5ea9c99 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -155,6 +155,11 @@ #define ICOM_ID1_VID 0x0C26 #define ICOM_ID1_PID 0x0004 +/* + * ASK.fr devices + */ +#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ + /* * DSS-20 Sync Station for Sony Ericsson P800 */ From 6e5882cfa24e1456702e463f6920fc0ca3c3d2b8 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Thu, 27 Apr 2006 11:32:29 -0700 Subject: [PATCH 131/160] [PATCH] x86/PAE: Fix pte_clear for the >4GB RAM case Proposed fix for ptep_get_and_clear_full PAE bug. Pte_clear had the same bug, so use the same fix for both. Turns out pmd_clear had it as well, but pgds are not affected. The problem is rather intricate. Page table entries in PAE mode are 64-bits wide, but the only atomic 8-byte write operation available in 32-bit mode is cmpxchg8b, which is expensive (at least on P4), and thus avoided. But it can happen that the processor may prefetch entries into the TLB in the middle of an operation which clears a page table entry. So one must always clear the P-bit in the low word of the page table entry first when clearing it. Since the sequence *ptep = __pte(0) leaves the order of the write dependent on the compiler, it must be coded explicitly as a clear of the low word followed by a clear of the high word. Further, there must be a write memory barrier here to enforce proper ordering by the compiler (and, in the future, by the processor as well). On > 4GB memory machines, the implementation of pte_clear for PAE was clearly deficient, as it could leave virtual mappings of physical memory above 4GB aliased to memory below 4GB in the TLB. The implementation of ptep_get_and_clear_full has a similar bug, although not nearly as likely to occur, since the mappings being cleared are in the process of being destroyed, and should never be dereferenced again. But, as luck would have it, it is possible to trigger bugs even without ever dereferencing these bogus TLB mappings, even if the clear is followed fairly soon after with a TLB flush or invalidation. The problem is that memory above 4GB may now be aliased into the first 4GB of memory, and in fact, may hit a region of memory with non-memory semantics. These regions include AGP and PCI space. As such, these memory regions are not cached by the processor. This introduces the bug. The processor can speculate memory operations, including memory writes, as long as they are committed with the proper ordering. Speculating a memory write to a linear address that has a bogus TLB mapping is possible. Normally, the speculation is harmless. But for cached memory, it does leave the falsely speculated cacheline unmodified, but in a dirty state. This cache line will be eventually written back. If this cacheline happens to intersect a region of memory that is not protected by the cache coherency protocol, it can corrupt data in I/O memory, which is generally a very bad thing to do, and can cause total system failure or just plain undefined behavior. These bugs are extremely unlikely, but the severity is of such magnitude, and the fix so simple that I think fixing them immediately is justified. Also, they are nearly impossible to debug. Signed-off-by: Zachary Amsden Signed-off-by: Linus Torvalds --- include/asm-i386/pgtable-2level.h | 3 +++ include/asm-i386/pgtable-3level.h | 20 ++++++++++++++++++++ include/asm-i386/pgtable.h | 4 +--- 3 files changed, 24 insertions(+), 3 deletions(-) diff --git a/include/asm-i386/pgtable-2level.h b/include/asm-i386/pgtable-2level.h index 27bde973abc7..2756d4b04c27 100644 --- a/include/asm-i386/pgtable-2level.h +++ b/include/asm-i386/pgtable-2level.h @@ -18,6 +18,9 @@ #define set_pte_atomic(pteptr, pteval) set_pte(pteptr,pteval) #define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval)) +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) + #define ptep_get_and_clear(mm,addr,xp) __pte(xchg(&(xp)->pte_low, 0)) #define pte_same(a, b) ((a).pte_low == (b).pte_low) #define pte_page(x) pfn_to_page(pte_pfn(x)) diff --git a/include/asm-i386/pgtable-3level.h b/include/asm-i386/pgtable-3level.h index 36a5aa63cbbf..dccb1b3337ad 100644 --- a/include/asm-i386/pgtable-3level.h +++ b/include/asm-i386/pgtable-3level.h @@ -85,6 +85,26 @@ static inline void pud_clear (pud_t * pud) { } #define pmd_offset(pud, address) ((pmd_t *) pud_page(*(pud)) + \ pmd_index(address)) +/* + * For PTEs and PDEs, we must clear the P-bit first when clearing a page table + * entry, so clear the bottom half first and enforce ordering with a compiler + * barrier. + */ +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + ptep->pte_low = 0; + smp_wmb(); + ptep->pte_high = 0; +} + +static inline void pmd_clear(pmd_t *pmd) +{ + u32 *tmp = (u32 *)pmd; + *tmp = 0; + smp_wmb(); + *(tmp + 1) = 0; +} + static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_t res; diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h index ee056c41a9fb..672c3f76b9df 100644 --- a/include/asm-i386/pgtable.h +++ b/include/asm-i386/pgtable.h @@ -204,12 +204,10 @@ extern unsigned long long __PAGE_KERNEL, __PAGE_KERNEL_EXEC; extern unsigned long pg0[]; #define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE)) -#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */ #define pmd_none(x) (!(unsigned long)pmd_val(x)) #define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) -#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) #define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) @@ -268,7 +266,7 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, unsigned long pte_t pte; if (full) { pte = *ptep; - *ptep = __pte(0); + pte_clear(mm, addr, ptep); } else { pte = ptep_get_and_clear(mm, addr, ptep); } From 8b4929e6a01620b55700e102e40e37ef02844849 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 20 Apr 2006 15:50:55 +0900 Subject: [PATCH 132/160] [PATCH] PCI: fix via irq SATA patch This device id improperly got added to the VIA chipset list with a previous patch. Remove it as it is not correct. Cc: Grzegorz Janoszka Cc: Jeff Garzik Signed-off-by: Greg Kroah-Hartman --- arch/i386/pci/irq.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index 73235443fda7..06dab00aaadc 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -591,7 +591,6 @@ static __init int via_router_probe(struct irq_router *r, case PCI_DEVICE_ID_VIA_8233A: case PCI_DEVICE_ID_VIA_8235: case PCI_DEVICE_ID_VIA_8237: - case PCI_DEVICE_ID_VIA_8237_SATA: /* FIXME: add new ones for 8233/5 */ r->name = "VIA"; r->get = pirq_via_get; From 9b860b8c4bde5949b272968597d1426d53080532 Mon Sep 17 00:00:00 2001 From: Ingo Oeser Date: Tue, 18 Apr 2006 11:20:55 +0200 Subject: [PATCH 133/160] [PATCH] PCI: Documentation: no more device ids Document that we don't like to add more PCI device ids but are happy to accept PCI vendor ids for linux/include/pci_ids.h Original text from Jeff Garzik. Signed-off-by: Ingo Oeser Signed-off-by: Greg Kroah-Hartman --- Documentation/pci.txt | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/Documentation/pci.txt b/Documentation/pci.txt index 711210b38f5f..66bbbf1d1ef6 100644 --- a/Documentation/pci.txt +++ b/Documentation/pci.txt @@ -259,7 +259,17 @@ on the bus need to be capable of doing it, so this is something which needs to be handled by platform and generic code, not individual drivers. -8. Obsolete functions +8. Vendor and device identifications +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +For the future, let's avoid adding device ids to include/linux/pci_ids.h. + +PCI_VENDOR_ID_xxx for vendors, and a hex constant for device ids. + +Rationale: PCI_VENDOR_ID_xxx constants are re-used, but device ids are not. + Further, device ids are arbitrary hex numbers, normally used only in a + single location, the pci_device_id table. + +9. Obsolete functions ~~~~~~~~~~~~~~~~~~~~~ There are several functions which you might come across when trying to port an old driver to the new PCI interface. They are no longer present From f01f4182597a3bb4b6fbf92e041faf7a1016f4b6 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 17 Apr 2006 04:02:54 +0200 Subject: [PATCH 134/160] [PATCH] PCI: fix potential resource leak in drivers/pci/msi.c The coverity checker spotted (as entry #599) that we might leak `entry' in drivers/pci/msi.c::msix_capability_init() This patch should take care of that. Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman --- drivers/pci/msi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 2087a397ef16..9855c4c920b8 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -793,8 +793,10 @@ static int msix_capability_init(struct pci_dev *dev, if (!entry) break; vector = get_msi_vector(dev); - if (vector < 0) + if (vector < 0) { + kmem_cache_free(msi_cachep, entry); break; + } j = entries[i].entry; entries[i].vector = vector; From 75cf7456dd87335f574dcd53c4ae616a2ad71a11 Mon Sep 17 00:00:00 2001 From: Chris Wedgwood Date: Tue, 18 Apr 2006 23:57:09 -0700 Subject: [PATCH 135/160] [PATCH] PCI quirk: VIA IRQ fixup should only run for VIA southbridges Alan Cox pointed out that the VIA 'IRQ fixup' was erroneously running on my system which has no VIA southbridge (but I do have a VIA IEEE 1394 device). This should address that. I also changed "Via IRQ" to "VIA IRQ" (initially I read Via as a capitalized via (by way/means of). Signed-off-by: Chris Wedgwood Acked-by: Jeff Garzik Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index c42ae2cf8d64..19e2b174d33c 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -642,13 +642,15 @@ static void quirk_via_irq(struct pci_dev *dev) new_irq = dev->irq & 0xf; pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); if (new_irq != irq) { - printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n", + printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n", pci_name(dev), irq, new_irq); udelay(15); /* unknown if delay really needed */ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); } } -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq); /* * VIA VT82C598 has its device ID settable and many BIOSes From 913e7ec545462b9a49fa308d0c81697236f7d29d Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Wed, 12 Apr 2006 19:43:35 -0400 Subject: [PATCH 136/160] [PATCH] Frame buffer: remove cmap sysfs interface Remove it as it does not work properly due to sysfs core changes. Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbsysfs.c | 92 ++--------------------------------------- 1 file changed, 3 insertions(+), 89 deletions(-) diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c index b72b05250a9d..34e07399756b 100644 --- a/drivers/video/fbsysfs.c +++ b/drivers/video/fbsysfs.c @@ -305,94 +305,6 @@ static ssize_t show_stride(struct class_device *class_device, char *buf) return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->fix.line_length); } -/* Format for cmap is "%02x%c%4x%4x%4x\n" */ -/* %02x entry %c transp %4x red %4x blue %4x green \n */ -/* 256 rows at 16 chars equals 4096, the normal page size */ -/* the code will automatically adjust for different page sizes */ -static ssize_t store_cmap(struct class_device *class_device, const char *buf, - size_t count) -{ - struct fb_info *fb_info = class_get_devdata(class_device); - int rc, i, start, length, transp = 0; - - if ((count > PAGE_SIZE) || ((count % 16) != 0)) - return -EINVAL; - - if (!fb_info->fbops->fb_setcolreg && !fb_info->fbops->fb_setcmap) - return -EINVAL; - - sscanf(buf, "%02x", &start); - length = count / 16; - - for (i = 0; i < length; i++) - if (buf[i * 16 + 2] != ' ') - transp = 1; - - /* If we can batch, do it */ - if (fb_info->fbops->fb_setcmap && length > 1) { - struct fb_cmap umap; - - memset(&umap, 0, sizeof(umap)); - if ((rc = fb_alloc_cmap(&umap, length, transp))) - return rc; - - umap.start = start; - for (i = 0; i < length; i++) { - sscanf(&buf[i * 16 + 3], "%4hx", &umap.red[i]); - sscanf(&buf[i * 16 + 7], "%4hx", &umap.blue[i]); - sscanf(&buf[i * 16 + 11], "%4hx", &umap.green[i]); - if (transp) - umap.transp[i] = (buf[i * 16 + 2] != ' '); - } - rc = fb_info->fbops->fb_setcmap(&umap, fb_info); - fb_copy_cmap(&umap, &fb_info->cmap); - fb_dealloc_cmap(&umap); - - return rc ?: count; - } - for (i = 0; i < length; i++) { - u16 red, blue, green, tsp; - - sscanf(&buf[i * 16 + 3], "%4hx", &red); - sscanf(&buf[i * 16 + 7], "%4hx", &blue); - sscanf(&buf[i * 16 + 11], "%4hx", &green); - tsp = (buf[i * 16 + 2] != ' '); - if ((rc = fb_info->fbops->fb_setcolreg(start++, - red, green, blue, tsp, fb_info))) - return rc; - - fb_info->cmap.red[i] = red; - fb_info->cmap.blue[i] = blue; - fb_info->cmap.green[i] = green; - if (transp) - fb_info->cmap.transp[i] = tsp; - } - return count; -} - -static ssize_t show_cmap(struct class_device *class_device, char *buf) -{ - struct fb_info *fb_info = class_get_devdata(class_device); - unsigned int i; - - if (!fb_info->cmap.red || !fb_info->cmap.blue || - !fb_info->cmap.green) - return -EINVAL; - - if (fb_info->cmap.len > PAGE_SIZE / 16) - return -EINVAL; - - /* don't mess with the format, the buffer is PAGE_SIZE */ - /* 256 entries at 16 chars per line equals 4096 = PAGE_SIZE */ - for (i = 0; i < fb_info->cmap.len; i++) { - snprintf(&buf[ i * 16], PAGE_SIZE - i * 16, "%02x%c%4x%4x%4x\n", i + fb_info->cmap.start, - ((fb_info->cmap.transp && fb_info->cmap.transp[i]) ? '*' : ' '), - fb_info->cmap.red[i], fb_info->cmap.blue[i], - fb_info->cmap.green[i]); - } - return 16 * fb_info->cmap.len; -} - static ssize_t store_blank(struct class_device *class_device, const char * buf, size_t count) { @@ -502,10 +414,12 @@ static ssize_t show_fbstate(struct class_device *class_device, char *buf) return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->state); } +/* When cmap is added back in it should be a binary attribute + * not a text one. Consideration should also be given to converting + * fbdev to use configfs instead of sysfs */ static struct class_device_attribute class_device_attrs[] = { __ATTR(bits_per_pixel, S_IRUGO|S_IWUSR, show_bpp, store_bpp), __ATTR(blank, S_IRUGO|S_IWUSR, show_blank, store_blank), - __ATTR(color_map, S_IRUGO|S_IWUSR, show_cmap, store_cmap), __ATTR(console, S_IRUGO|S_IWUSR, show_console, store_console), __ATTR(cursor, S_IRUGO|S_IWUSR, show_cursor, store_cursor), __ATTR(mode, S_IRUGO|S_IWUSR, show_mode, store_mode), From 4d17ffda331ba6030bb8c233c73d6a87954d8ea7 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 25 Apr 2006 15:37:26 +0200 Subject: [PATCH 137/160] [PATCH] Kobject: fix build error This fixes a build error for various odd combinations of CONFIG_HOTPLUG and CONFIG_NET. Signed-off-by: Kay Sievers Cc: Nigel Cunningham Cc: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 2 +- lib/kobject_uevent.c | 8 +++++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index dcd0623be892..e38bb357282a 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -259,7 +259,7 @@ struct subsys_attribute { extern int subsys_create_file(struct subsystem * , struct subsys_attribute *); extern void subsys_remove_file(struct subsystem * , struct subsys_attribute *); -#if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET) +#if defined(CONFIG_HOTPLUG) void kobject_uevent(struct kobject *kobj, enum kobject_action action); int add_uevent_var(char **envp, int num_envp, int *cur_index, diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 982226daf939..7f20e7b857cb 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -25,11 +25,13 @@ #define BUFFER_SIZE 2048 /* buffer for the variables */ #define NUM_ENVP 32 /* number of env pointers */ -#if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET) +#if defined(CONFIG_HOTPLUG) u64 uevent_seqnum; char uevent_helper[UEVENT_HELPER_PATH_LEN] = "/sbin/hotplug"; static DEFINE_SPINLOCK(sequence_lock); +#if defined(CONFIG_NET) static struct sock *uevent_sock; +#endif static char *action_to_string(enum kobject_action action) { @@ -155,6 +157,7 @@ void kobject_uevent(struct kobject *kobj, enum kobject_action action) spin_unlock(&sequence_lock); sprintf(seq_buff, "SEQNUM=%llu", (unsigned long long)seq); +#if defined(CONFIG_NET) /* send netlink message */ if (uevent_sock) { struct sk_buff *skb; @@ -179,6 +182,7 @@ void kobject_uevent(struct kobject *kobj, enum kobject_action action) netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL); } } +#endif /* call uevent_helper, usually only enabled during early boot */ if (uevent_helper[0]) { @@ -249,6 +253,7 @@ int add_uevent_var(char **envp, int num_envp, int *cur_index, } EXPORT_SYMBOL_GPL(add_uevent_var); +#if defined(CONFIG_NET) static int __init kobject_uevent_init(void) { uevent_sock = netlink_kernel_create(NETLINK_KOBJECT_UEVENT, 1, NULL, @@ -264,5 +269,6 @@ static int __init kobject_uevent_init(void) } postcore_initcall(kobject_uevent_init); +#endif #endif /* CONFIG_HOTPLUG */ From bde11d794206ae8d72defd0e8a481181200f7dc4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 18 Apr 2006 21:30:22 -0700 Subject: [PATCH 138/160] [PATCH] Fix OCFS2 warning when DEBUG_FS is not enabled Fix the following warning which happens when OCFS2_FS is enabled but DEBUG_FS isn't: fs/ocfs2/dlmglue.c: In function `ocfs2_dlm_init_debug': fs/ocfs2/dlmglue.c:2036: warning: passing arg 5 of `debugfs_create_file' discards qualifiers from pointer target type Signed-off-by: Jean Delvare Cc: Arjan van de Ven Cc: Joel Becker Acked-by: Mark Fasheh Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/debugfs.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index 176e2d371577..047567d34ca7 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -58,9 +58,8 @@ struct dentry *debugfs_create_blob(const char *name, mode_t mode, */ static inline struct dentry *debugfs_create_file(const char *name, mode_t mode, - struct dentry *parent, - void *data, - struct file_operations *fops) + struct dentry *parent, void *data, + const struct file_operations *fops) { return ERR_PTR(-ENODEV); } From 5b3ef14e3e9d745a512d65fcb4ef9be541226d80 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 22 Apr 2006 12:14:44 +0200 Subject: [PATCH 139/160] [PATCH] Kobject: possible cleanups This patch contains the following possible cleanups: - #if 0 the following unused global function: - subsys_remove_file() - remove the following unused EXPORT_SYMBOL's: - kset_find_obj - subsystem_init - remove the following unused EXPORT_SYMBOL_GPL: - kobject_add_dir Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 1 - lib/kobject.c | 7 ++----- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index e38bb357282a..c187c53cecd0 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -257,7 +257,6 @@ struct subsys_attribute { }; extern int subsys_create_file(struct subsystem * , struct subsys_attribute *); -extern void subsys_remove_file(struct subsystem * , struct subsys_attribute *); #if defined(CONFIG_HOTPLUG) void kobject_uevent(struct kobject *kobj, enum kobject_action action); diff --git a/lib/kobject.c b/lib/kobject.c index 01d957513940..b46350c27837 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -422,7 +422,6 @@ struct kobject *kobject_add_dir(struct kobject *parent, const char *name) return k; } -EXPORT_SYMBOL_GPL(kobject_add_dir); /** * kset_init - initialize a kset for use @@ -569,7 +568,7 @@ int subsys_create_file(struct subsystem * s, struct subsys_attribute * a) * @s: subsystem. * @a: attribute desciptor. */ - +#if 0 void subsys_remove_file(struct subsystem * s, struct subsys_attribute * a) { if (subsys_get(s)) { @@ -577,6 +576,7 @@ void subsys_remove_file(struct subsystem * s, struct subsys_attribute * a) subsys_put(s); } } +#endif /* 0 */ EXPORT_SYMBOL(kobject_init); EXPORT_SYMBOL(kobject_register); @@ -588,10 +588,7 @@ EXPORT_SYMBOL(kobject_del); EXPORT_SYMBOL(kset_register); EXPORT_SYMBOL(kset_unregister); -EXPORT_SYMBOL(kset_find_obj); -EXPORT_SYMBOL(subsystem_init); EXPORT_SYMBOL(subsystem_register); EXPORT_SYMBOL(subsystem_unregister); EXPORT_SYMBOL(subsys_create_file); -EXPORT_SYMBOL(subsys_remove_file); From 5bd982ed0f5ae73bfd9ff452b460a3b08108bfee Mon Sep 17 00:00:00 2001 From: Paolo Ciarrocchi Date: Tue, 25 Apr 2006 22:47:51 +0200 Subject: [PATCH 140/160] [PATCH] Added URI of "linux kernel development process" Signed-off-by: Paolo Ciarrocchi Signed-off-by: Greg Kroah-Hartman --- Documentation/HOWTO | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 6c9e746267da..915ae8c986c6 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -603,7 +603,8 @@ start exactly where you are now. ---------- -Thanks to Paolo Ciarrocchi who allowed the "Development Process" section +Thanks to Paolo Ciarrocchi who allowed the "Development Process" +(http://linux.tar.bz/articles/2.6-development_process) section to be based on text he had written, and to Randy Dunlap and Gerrit Huizenga for some of the list of things you should and should not say. Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers, From f0fe253c4719faf76d40f581cdc0e8aef77273bb Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Sat, 22 Apr 2006 09:36:07 -0500 Subject: [PATCH 141/160] [IA64-SGI] - Fix discover of nearest cpu node to IO node Fix a bug that causes discovery of the nearest node/cpu to a TIO (IO node) to fail. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/sn2/sn_hwperf.c | 4 ++-- include/asm-ia64/sn/sn2/sn_hwperf.h | 6 +++++- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index d917afa30b27..7ec65bc0ccf6 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -284,6 +284,8 @@ static int sn_hwperf_get_nearest_node_objdata(struct sn_hwperf_object_info *objb /* find nearest node with cpus and nearest memory */ for (router=NULL, j=0; j < op->ports; j++) { dest = sn_hwperf_findobj_id(objbuf, nobj, ptdata[j].conn_id); + if (dest && SN_HWPERF_IS_ROUTER(dest)) + router = dest; if (!dest || SN_HWPERF_FOREIGN(dest) || !SN_HWPERF_IS_NODE(dest) || SN_HWPERF_IS_IONODE(dest)) { continue; @@ -299,8 +301,6 @@ static int sn_hwperf_get_nearest_node_objdata(struct sn_hwperf_object_info *objb *near_mem_node = c; found_mem++; } - if (SN_HWPERF_IS_ROUTER(dest)) - router = dest; } if (router && (!found_cpu || !found_mem)) { diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/include/asm-ia64/sn/sn2/sn_hwperf.h index 291ef3d69da2..e61ebac38cdd 100644 --- a/include/asm-ia64/sn/sn2/sn_hwperf.h +++ b/include/asm-ia64/sn/sn2/sn_hwperf.h @@ -45,8 +45,12 @@ struct sn_hwperf_object_info { #define SN_HWPERF_IS_NODE(x) ((x) && strstr((x)->name, "SHub")) #define SN_HWPERF_IS_NODE_SHUB2(x) ((x) && strstr((x)->name, "SHub 2.")) #define SN_HWPERF_IS_IONODE(x) ((x) && strstr((x)->name, "TIO")) -#define SN_HWPERF_IS_ROUTER(x) ((x) && strstr((x)->name, "Router")) #define SN_HWPERF_IS_NL3ROUTER(x) ((x) && strstr((x)->name, "NL3Router")) +#define SN_HWPERF_IS_NL4ROUTER(x) ((x) && strstr((x)->name, "NL4Router")) +#define SN_HWPERF_IS_OLDROUTER(x) ((x) && strstr((x)->name, "Router")) +#define SN_HWPERF_IS_ROUTER(x) (SN_HWPERF_IS_NL3ROUTER(x) || \ + SN_HWPERF_IS_NL4ROUTER(x) || \ + SN_HWPERF_IS_OLDROUTER(x)) #define SN_HWPERF_FOREIGN(x) ((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared) #define SN_HWPERF_SAME_OBJTYPE(x,y) ((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\ (SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\ From dd4cb9f8ac9717c9db2b2afc5a82cb95a3d5dec3 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Sat, 22 Apr 2006 09:37:19 -0500 Subject: [PATCH 142/160] [IA64-SGI] - Reduce overhead of reading sn_topology MPI programs using certain debug options have a long startup time. This was traced to a "vmalloc/vfree" in the code that reads /proc/sgi_sn/sn_topology. On large systems, vfree requires an IPI to all cpus to do TLB purging. Replace the vmalloc/vfree with kmalloc/kfree. Although the size of the structure being allocated is unknown, it will not not exceed 96 bytes. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/sn2/sn_hwperf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 7ec65bc0ccf6..739c948dc504 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -493,7 +493,7 @@ static int sn_topology_show(struct seq_file *s, void *d) * numalink ports */ sz = obj->ports * sizeof(struct sn_hwperf_port_info); - if ((ptdata = vmalloc(sz)) == NULL) + if ((ptdata = kmalloc(sz, GFP_KERNEL)) == NULL) return -ENOMEM; e = ia64_sn_hwperf_op(sn_hwperf_master_nasid, SN_HWPERF_ENUM_PORTS, obj->id, sz, @@ -541,7 +541,7 @@ static int sn_topology_show(struct seq_file *s, void *d) (SN_HWPERF_IS_NL3ROUTER(obj) || SN_HWPERF_IS_NL3ROUTER(p)) ? "LLP3" : "LLP4"); } - vfree(ptdata); + kfree(ptdata); } return 0; From 1df57c0c21c92a6d4fcfe5304c84151ed9beb7a2 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Tue, 25 Apr 2006 10:47:48 -0500 Subject: [PATCH 143/160] [IA64] enable dumps to capture second page of kernel stack In SLES10 (2.6.16) crash dumping (in my experience, LKCD) is unable to capture the second page of the 2-page task/stack allocation. This is particularly troublesome for dump analysis, as the stack traceback cannot be done. (A similar convention is probably needed throughout the kernel to make kernel multi-page allocations detectable for dumping) Multi-page kernel allocations are represented by the single page structure associated with the first page of the allocation. The page structures associated with the other pages are unintialized. If the dumper is selecting only kernel pages it has no way to identify any but the first page of the allocation. The fix is to make the task/stack allocation a compound page. Signed-off-by: Cliff Wickman Signed-off-by: Tony Luck --- include/asm-ia64/thread_info.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h index 56394a2c7055..e5392c4d30c6 100644 --- a/include/asm-ia64/thread_info.h +++ b/include/asm-ia64/thread_info.h @@ -67,7 +67,7 @@ struct thread_info { #define end_of_stack(p) (unsigned long *)((void *)(p) + IA64_RBS_OFFSET) #define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR -#define alloc_task_struct() ((task_t *)__get_free_pages(GFP_KERNEL, KERNEL_STACK_SIZE_ORDER)) +#define alloc_task_struct() ((task_t *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER)) #define free_task_struct(tsk) free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER) #endif /* !__ASSEMBLY */ From cda3d4a069b915cf46e640bb6872a9d9aefeaabe Mon Sep 17 00:00:00 2001 From: Mike Habeck Date: Wed, 26 Apr 2006 12:05:50 -0500 Subject: [PATCH 144/160] [IA64-SGI] fix SGI Altix tioce_reserve_m32() bug The following patch fixes a bug in the SGI Altix tioce_reserve_m32() code. The bug was that we could walking past the end of the CE ASIC 32/40bit PMU ATE Buffer, resulting in a PIO Reply Error. Signed-off-by: Mike Habeck Signed-off-by: Tony Luck --- arch/ia64/sn/pci/tioce_provider.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index fa073cc4b565..833295624e5d 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -682,9 +682,6 @@ tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit) int ate_index, last_ate, ps; struct tioce *ce_mmr; - if (!TIOCE_M32_ADDR(base)) - return; - ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base; ps = ce_kern->ce_ate3240_pagesize; ate_index = ATE_PAGE(base, ps); @@ -693,6 +690,9 @@ tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit) if (ate_index < 64) ate_index = 64; + if (last_ate >= TIOCE_NUM_M3240_ATES) + last_ate = TIOCE_NUM_M3240_ATES - 1; + while (ate_index <= last_ate) { u64 ate; From 189979619f90fd2eb168fbb9c262569176160624 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Thu, 27 Apr 2006 10:07:08 -0500 Subject: [PATCH 145/160] [IA64] Add mca recovery failure messages When the mca recovery code encounters a condition that makes the MCA non-recoverable, print the reason it could not recover. This will make it easier to identify why the recovery code did not recover. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/kernel/mca_drv.c | 54 +++++++++++++++++++++++++------------- 1 file changed, 36 insertions(+), 18 deletions(-) diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index 37c88eb55873..ca6666b51ccb 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -62,6 +62,11 @@ typedef enum { ISOLATE_NONE } isolate_status_t; +typedef enum { + MCA_NOT_RECOVERED = 0, + MCA_RECOVERED = 1 +} recovery_status_t; + /* * This pool keeps pointers to the section part of SAL error record */ @@ -71,6 +76,18 @@ static struct { int max_idx; /* Maximum index of section pointer list pool */ } slidx_pool; +static int +fatal_mca(const char *fmt, ...) +{ + va_list args; + + va_start(args, fmt); + vprintk(fmt, args); + va_end(args); + + return MCA_NOT_RECOVERED; +} + /** * mca_page_isolate - isolate a poisoned page in order not to use it later * @paddr: poisoned memory location @@ -424,7 +441,7 @@ recover_from_read_error(slidx_table_t *slidx, /* Is target address valid? */ if (!pbci->tv) - return 0; + return fatal_mca(KERN_ALERT "MCA: target address not valid\n"); /* * cpu read or memory-mapped io read @@ -442,7 +459,7 @@ recover_from_read_error(slidx_table_t *slidx, /* Is minstate valid? */ if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate)) - return 0; + return fatal_mca(KERN_ALERT "MCA: minstate not valid\n"); psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr); psr2 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_xpsr); @@ -476,12 +493,13 @@ recover_from_read_error(slidx_table_t *slidx, psr2->bn = 1; psr2->i = 0; - return 1; + return MCA_RECOVERED; } } - return 0; + return fatal_mca(KERN_ALERT "MCA: kernel context not recovered," + " iip 0x%lx\n", pmsa->pmsa_iip); } /** @@ -567,13 +585,13 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, * The machine check is corrected. */ if (psp->cm == 1) - return 1; + return MCA_RECOVERED; /* * The error was not contained. Software must be reset. */ if (psp->us || psp->ci == 0) - return 0; + return fatal_mca(KERN_ALERT "MCA: error not contained\n"); /* * The cache check and bus check bits have four possible states @@ -584,20 +602,22 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, * 1 1 Memory error, attempt recovery */ if (psp->bc == 0 || pbci == NULL) - return 0; + return fatal_mca(KERN_ALERT "MCA: No bus check\n"); /* * Sorry, we cannot handle so many. */ if (peidx_bus_check_num(peidx) > 1) - return 0; + return fatal_mca(KERN_ALERT "MCA: Too many bus checks\n"); /* * Well, here is only one bus error. */ - if (pbci->ib || pbci->cc) - return 0; + if (pbci->ib) + return fatal_mca(KERN_ALERT "MCA: Internal Bus error\n"); + if (pbci->cc) + return fatal_mca(KERN_ALERT "MCA: Cache-cache error\n"); if (pbci->eb && pbci->bsi > 0) - return 0; + return fatal_mca(KERN_ALERT "MCA: External bus check fatal status\n"); /* * This is a local MCA and estimated as recoverble external bus error. @@ -609,7 +629,7 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, /* * On account of strange SAL error record, we cannot recover. */ - return 0; + return fatal_mca(KERN_ALERT "MCA: Strange SAL record\n"); } /** @@ -638,12 +658,10 @@ mca_try_to_recover(void *rec, struct ia64_sal_os_state *sos) /* Now, OS can recover when there is one processor error section */ if (n_proc_err > 1) - return 0; - else if (n_proc_err == 0) { + return fatal_mca(KERN_ALERT "MCA: Too Many Errors\n"); + else if (n_proc_err == 0) /* Weird SAL record ... We need not to recover */ - - return 1; - } + return fatal_mca(KERN_ALERT "MCA: Weird SAL record\n"); /* Make index of processor error section */ mca_make_peidx((sal_log_processor_info_t*) @@ -654,7 +672,7 @@ mca_try_to_recover(void *rec, struct ia64_sal_os_state *sos) /* Check whether MCA is global or not */ if (is_mca_global(&peidx, &pbci, sos)) - return 0; + return fatal_mca(KERN_ALERT "MCA: global MCA\n"); /* Try to recover a processor error */ return recover_from_processor_error(platform_err, &slidx, &peidx, From 7384c8bd90a4932517872f9807d34979a6fd29c4 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 27 Apr 2006 06:10:35 -0400 Subject: [PATCH 146/160] [IA64] update sn2 defconfig Update SN2 defconfig to latest kernel and add QLA FC drivers commonly found in SN2 boxes. Signed-off-by: Jes Sorensen Signed-off-by: Tony Luck --- arch/ia64/configs/sn2_defconfig | 76 +++++++++++++++++++-------------- 1 file changed, 45 insertions(+), 31 deletions(-) diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index a718034d68d0..f6a8853cd1b4 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc5 -# Mon Feb 27 16:06:38 2006 +# Linux kernel version: 2.6.17-rc3 +# Thu Apr 27 11:48:23 2006 # # @@ -24,6 +24,7 @@ CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -38,10 +39,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -53,7 +50,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -62,6 +58,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -84,8 +81,10 @@ CONFIG_64BIT=y CONFIG_MMU=y CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y +CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y @@ -116,7 +115,6 @@ CONFIG_IA64_SGI_SN_XP=m CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=1024 -CONFIG_IA64_NR_NODES=256 # CONFIG_HOTPLUG_CPU is not set CONFIG_SCHED_SMT=y CONFIG_PREEMPT=y @@ -136,6 +134,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_NUMA=y +CONFIG_NODES_SHIFT=8 CONFIG_VIRTUAL_MEM_MAP=y CONFIG_HOLES_IN_ZONE=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y @@ -187,7 +186,6 @@ CONFIG_ACPI_SYSTEM=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -231,6 +229,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m @@ -238,9 +237,11 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETFILTER is not set @@ -468,9 +469,14 @@ CONFIG_SCSI_SATA_VITESSE=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLA_FC is not set +CONFIG_SCSI_QLA_FC=y +CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y +# CONFIG_SCSI_QLA21XX is not set +CONFIG_SCSI_QLA22XX=y +CONFIG_SCSI_QLA2300=y +CONFIG_SCSI_QLA2322=y +# CONFIG_SCSI_QLA24XX is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -486,6 +492,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=y +# CONFIG_MD_RAID5_RESHAPE is not set # CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=y # CONFIG_MD_FAULTY is not set @@ -694,6 +701,7 @@ CONFIG_EFI_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=y +# CONFIG_AGP_VIA is not set CONFIG_AGP_SGI_TIOCA=y # CONFIG_DRM is not set CONFIG_RAW_DRIVER=m @@ -734,10 +742,6 @@ CONFIG_MMTIMER=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -747,6 +751,7 @@ CONFIG_MMTIMER=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -757,6 +762,7 @@ CONFIG_MMTIMER=y # Console display driver support # CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y # @@ -769,6 +775,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -829,9 +836,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -845,15 +850,6 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -904,6 +900,19 @@ CONFIG_USB_MON=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # @@ -911,9 +920,10 @@ CONFIG_INFINIBAND=m # CONFIG_INFINIBAND_USER_MAD is not set CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m # @@ -923,9 +933,14 @@ CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y # -# EDAC - error detection and reporting (RAS) +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -997,7 +1012,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # From f10a04c034c7285a1b15dfa4a83d3e56578e34e8 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Fri, 28 Apr 2006 15:02:51 +1000 Subject: [PATCH 147/160] [PATCH] powerpc: Fix pagetable bloat for hugepages At present, ARCH=powerpc kernels can waste considerable space in pagetables when making large hugepage mappings. Hugepage PTEs go in PMD pages, but each PMD page maps 256M and so contains only 16 hugepage PTEs (128 bytes of data), but takes up a 1024 byte allocation. With CONFIG_PPC_64K_PAGES enabled (64k base page size), the situation is worse. Now hugepage PTEs are at the PTE page level (also mapping 256M), so we store 16 hugepage PTEs in a 64k allocation. The PowerPC MMU already means that any 256M region is either all hugepage, or all normal pages. Thus, with some care, we can use a different allocation for the hugepage PTE tables and only allocate the 128 bytes necessary. Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hugetlbpage.c | 297 +++++++++++++++++++++++++++++----- arch/powerpc/mm/init_64.c | 7 + include/asm-powerpc/page_64.h | 1 + include/asm-powerpc/pgalloc.h | 2 + 4 files changed, 270 insertions(+), 37 deletions(-) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 7370f9f33e29..266b8b2ceac9 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -30,13 +30,66 @@ #define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT) #define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT) +#ifdef CONFIG_PPC_64K_PAGES +#define HUGEPTE_INDEX_SIZE (PMD_SHIFT-HPAGE_SHIFT) +#else +#define HUGEPTE_INDEX_SIZE (PUD_SHIFT-HPAGE_SHIFT) +#endif +#define PTRS_PER_HUGEPTE (1 << HUGEPTE_INDEX_SIZE) +#define HUGEPTE_TABLE_SIZE (sizeof(pte_t) << HUGEPTE_INDEX_SIZE) + +#define HUGEPD_SHIFT (HPAGE_SHIFT + HUGEPTE_INDEX_SIZE) +#define HUGEPD_SIZE (1UL << HUGEPD_SHIFT) +#define HUGEPD_MASK (~(HUGEPD_SIZE-1)) + +#define huge_pgtable_cache (pgtable_cache[HUGEPTE_CACHE_NUM]) + +/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad() + * will choke on pointers to hugepte tables, which is handy for + * catching screwups early. */ +#define HUGEPD_OK 0x1 + +typedef struct { unsigned long pd; } hugepd_t; + +#define hugepd_none(hpd) ((hpd).pd == 0) + +static inline pte_t *hugepd_page(hugepd_t hpd) +{ + BUG_ON(!(hpd.pd & HUGEPD_OK)); + return (pte_t *)(hpd.pd & ~HUGEPD_OK); +} + +static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr) +{ + unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1)); + pte_t *dir = hugepd_page(*hpdp); + + return dir + idx; +} + +static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, + unsigned long address) +{ + pte_t *new = kmem_cache_alloc(huge_pgtable_cache, + GFP_KERNEL|__GFP_REPEAT); + + if (! new) + return -ENOMEM; + + spin_lock(&mm->page_table_lock); + if (!hugepd_none(*hpdp)) + kmem_cache_free(huge_pgtable_cache, new); + else + hpdp->pd = (unsigned long)new | HUGEPD_OK; + spin_unlock(&mm->page_table_lock); + return 0; +} + /* Modelled after find_linux_pte() */ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { pgd_t *pg; pud_t *pu; - pmd_t *pm; - pte_t *pt; BUG_ON(! in_hugepage_area(mm->context, addr)); @@ -46,26 +99,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) if (!pgd_none(*pg)) { pu = pud_offset(pg, addr); if (!pud_none(*pu)) { - pm = pmd_offset(pu, addr); #ifdef CONFIG_PPC_64K_PAGES - /* Currently, we use the normal PTE offset within full - * size PTE pages, thus our huge PTEs are scattered in - * the PTE page and we do waste some. We may change - * that in the future, but the current mecanism keeps - * things much simpler - */ - if (!pmd_none(*pm)) { - /* Note: pte_offset_* are all equivalent on - * ppc64 as we don't have HIGHMEM - */ - pt = pte_offset_kernel(pm, addr); - return pt; - } -#else /* CONFIG_PPC_64K_PAGES */ - /* On 4k pages, we put huge PTEs in the PMD page */ - pt = (pte_t *)pm; - return pt; -#endif /* CONFIG_PPC_64K_PAGES */ + pmd_t *pm; + pm = pmd_offset(pu, addr); + if (!pmd_none(*pm)) + return hugepte_offset((hugepd_t *)pm, addr); +#else + return hugepte_offset((hugepd_t *)pu, addr); +#endif } } @@ -76,8 +117,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pgd_t *pg; pud_t *pu; - pmd_t *pm; - pte_t *pt; + hugepd_t *hpdp = NULL; BUG_ON(! in_hugepage_area(mm->context, addr)); @@ -87,23 +127,182 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) pu = pud_alloc(mm, pg, addr); if (pu) { - pm = pmd_alloc(mm, pu, addr); - if (pm) { #ifdef CONFIG_PPC_64K_PAGES - /* See comment in huge_pte_offset. Note that if we ever - * want to put the page size in the PMD, we would have - * to open code our own pte_alloc* function in order - * to populate and set the size atomically - */ - pt = pte_alloc_map(mm, pm, addr); -#else /* CONFIG_PPC_64K_PAGES */ - pt = (pte_t *)pm; -#endif /* CONFIG_PPC_64K_PAGES */ - return pt; - } + pmd_t *pm; + pm = pmd_alloc(mm, pu, addr); + if (pm) + hpdp = (hugepd_t *)pm; +#else + hpdp = (hugepd_t *)pu; +#endif } - return NULL; + if (! hpdp) + return NULL; + + if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr)) + return NULL; + + return hugepte_offset(hpdp, addr); +} + +static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp) +{ + pte_t *hugepte = hugepd_page(*hpdp); + + hpdp->pd = 0; + tlb->need_flush = 1; + pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM, + HUGEPTE_TABLE_SIZE-1)); +} + +#ifdef CONFIG_PPC_64K_PAGES +static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, + unsigned long addr, unsigned long end, + unsigned long floor, unsigned long ceiling) +{ + pmd_t *pmd; + unsigned long next; + unsigned long start; + + start = addr; + pmd = pmd_offset(pud, addr); + do { + next = pmd_addr_end(addr, end); + if (pmd_none(*pmd)) + continue; + free_hugepte_range(tlb, (hugepd_t *)pmd); + } while (pmd++, addr = next, addr != end); + + start &= PUD_MASK; + if (start < floor) + return; + if (ceiling) { + ceiling &= PUD_MASK; + if (!ceiling) + return; + } + if (end - 1 > ceiling - 1) + return; + + pmd = pmd_offset(pud, start); + pud_clear(pud); + pmd_free_tlb(tlb, pmd); +} +#endif + +static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, + unsigned long addr, unsigned long end, + unsigned long floor, unsigned long ceiling) +{ + pud_t *pud; + unsigned long next; + unsigned long start; + + start = addr; + pud = pud_offset(pgd, addr); + do { + next = pud_addr_end(addr, end); +#ifdef CONFIG_PPC_64K_PAGES + if (pud_none_or_clear_bad(pud)) + continue; + hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling); +#else + if (pud_none(*pud)) + continue; + free_hugepte_range(tlb, (hugepd_t *)pud); +#endif + } while (pud++, addr = next, addr != end); + + start &= PGDIR_MASK; + if (start < floor) + return; + if (ceiling) { + ceiling &= PGDIR_MASK; + if (!ceiling) + return; + } + if (end - 1 > ceiling - 1) + return; + + pud = pud_offset(pgd, start); + pgd_clear(pgd); + pud_free_tlb(tlb, pud); +} + +/* + * This function frees user-level page tables of a process. + * + * Must be called with pagetable lock held. + */ +void hugetlb_free_pgd_range(struct mmu_gather **tlb, + unsigned long addr, unsigned long end, + unsigned long floor, unsigned long ceiling) +{ + pgd_t *pgd; + unsigned long next; + unsigned long start; + + /* + * Comments below take from the normal free_pgd_range(). They + * apply here too. The tests against HUGEPD_MASK below are + * essential, because we *don't* test for this at the bottom + * level. Without them we'll attempt to free a hugepte table + * when we unmap just part of it, even if there are other + * active mappings using it. + * + * The next few lines have given us lots of grief... + * + * Why are we testing HUGEPD* at this top level? Because + * often there will be no work to do at all, and we'd prefer + * not to go all the way down to the bottom just to discover + * that. + * + * Why all these "- 1"s? Because 0 represents both the bottom + * of the address space and the top of it (using -1 for the + * top wouldn't help much: the masks would do the wrong thing). + * The rule is that addr 0 and floor 0 refer to the bottom of + * the address space, but end 0 and ceiling 0 refer to the top + * Comparisons need to use "end - 1" and "ceiling - 1" (though + * that end 0 case should be mythical). + * + * Wherever addr is brought up or ceiling brought down, we + * must be careful to reject "the opposite 0" before it + * confuses the subsequent tests. But what about where end is + * brought down by HUGEPD_SIZE below? no, end can't go down to + * 0 there. + * + * Whereas we round start (addr) and ceiling down, by different + * masks at different levels, in order to test whether a table + * now has no other vmas using it, so can be freed, we don't + * bother to round floor or end up - the tests don't need that. + */ + + addr &= HUGEPD_MASK; + if (addr < floor) { + addr += HUGEPD_SIZE; + if (!addr) + return; + } + if (ceiling) { + ceiling &= HUGEPD_MASK; + if (!ceiling) + return; + } + if (end - 1 > ceiling - 1) + end -= HUGEPD_SIZE; + if (addr > end - 1) + return; + + start = addr; + pgd = pgd_offset((*tlb)->mm, addr); + do { + BUG_ON(! in_hugepage_area((*tlb)->mm->context, addr)); + next = pgd_addr_end(addr, end); + if (pgd_none_or_clear_bad(pgd)) + continue; + hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling); + } while (pgd++, addr = next, addr != end); } void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, @@ -841,3 +1040,27 @@ repeat: out: return err; } + +static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) +{ + memset(addr, 0, kmem_cache_size(cache)); +} + +static int __init hugetlbpage_init(void) +{ + if (!cpu_has_feature(CPU_FTR_16M_PAGE)) + return -ENODEV; + + huge_pgtable_cache = kmem_cache_create("hugepte_cache", + HUGEPTE_TABLE_SIZE, + HUGEPTE_TABLE_SIZE, + SLAB_HWCACHE_ALIGN | + SLAB_MUST_HWCACHE_ALIGN, + zero_ctor, NULL); + if (! huge_pgtable_cache) + panic("hugetlbpage_init(): could not create hugepte cache\n"); + + return 0; +} + +module_init(hugetlbpage_init); diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index babebd15bdc4..9e30f968c184 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -162,7 +162,14 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { }; #endif /* CONFIG_PPC_64K_PAGES */ +#ifdef CONFIG_HUGETLB_PAGE +/* Hugepages need one extra cache, initialized in hugetlbpage.c. We + * can't put into the tables above, because HPAGE_SHIFT is not compile + * time constant. */ +kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1]; +#else kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; +#endif void pgtable_cache_init(void) { diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index 3fb061bab9ec..eab779c21995 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -101,6 +101,7 @@ extern unsigned int HPAGE_SHIFT; - (1U << GET_HTLB_AREA(addr))) & 0xffff) #define ARCH_HAS_HUGEPAGE_ONLY_RANGE +#define ARCH_HAS_HUGETLB_FREE_PGD_RANGE #define ARCH_HAS_PREPARE_HUGEPAGE_RANGE #define ARCH_HAS_SETCLEAR_HUGE_PTE diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h index a00ee002cd11..9f0917c68659 100644 --- a/include/asm-powerpc/pgalloc.h +++ b/include/asm-powerpc/pgalloc.h @@ -17,11 +17,13 @@ extern kmem_cache_t *pgtable_cache[]; #define PTE_CACHE_NUM 0 #define PMD_CACHE_NUM 1 #define PGD_CACHE_NUM 2 +#define HUGEPTE_CACHE_NUM 3 #else #define PTE_CACHE_NUM 0 #define PMD_CACHE_NUM 1 #define PUD_CACHE_NUM 1 #define PGD_CACHE_NUM 0 +#define HUGEPTE_CACHE_NUM 2 #endif /* From f709bfac48492e289ba78ea1e8c0b3daab264e90 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 28 Apr 2006 16:28:35 +1000 Subject: [PATCH 148/160] powerpc/pseries: Tell firmware our capabilities on new machines This adds code to call a new firmware method to tell the firmware what machines and capabilities (such as VMX/Altivec) we support. This will be needed on POWER5+ and POWER6 machines, and it has no effect on past and current machines. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_init.c | 111 ++++++++++++++++++++++++++++++-- 1 file changed, 107 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 7e4d54821a07..00ad7f981a0d 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -636,10 +636,95 @@ static void __init early_cmdline_parse(void) #ifdef CONFIG_PPC_PSERIES /* - * To tell the firmware what our capabilities are, we have to pass - * it a fake 32-bit ELF header containing a couple of PT_NOTE sections - * that contain structures that contain the actual values. + * There are two methods for telling firmware what our capabilities are. + * Newer machines have an "ibm,client-architecture-support" method on the + * root node. For older machines, we have to call the "process-elf-header" + * method in the /packages/elf-loader node, passing it a fake 32-bit + * ELF header containing a couple of PT_NOTE sections that contain + * structures that contain various information. */ + +/* + * New method - extensible architecture description vector. + * + * Because the description vector contains a mix of byte and word + * values, we declare it as an unsigned char array, and use this + * macro to put word values in. + */ +#define W(x) ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \ + ((x) >> 8) & 0xff, (x) & 0xff + +/* Option vector bits - generic bits in byte 1 */ +#define OV_IGNORE 0x80 /* ignore this vector */ +#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/ + +/* Option vector 1: processor architectures supported */ +#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */ +#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */ +#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */ +#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */ +#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */ +#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */ + +/* Option vector 2: Open Firmware options supported */ +#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */ + +/* Option vector 3: processor options supported */ +#define OV3_FP 0x80 /* floating point */ +#define OV3_VMX 0x40 /* VMX/Altivec */ + +/* Option vector 5: PAPR/OF options supported */ +#define OV5_LPAR 0x80 /* logical partitioning supported */ +#define OV5_SPLPAR 0x40 /* shared-processor LPAR supported */ +/* ibm,dynamic-reconfiguration-memory property supported */ +#define OV5_DRCONF_MEMORY 0x20 +#define OV5_LARGE_PAGES 0x10 /* large pages supported */ + +/* + * The architecture vector has an array of PVR mask/value pairs, + * followed by # option vectors - 1, followed by the option vectors. + */ +static unsigned char ibm_architecture_vec[] = { + W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */ + W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */ + 5 - 1, /* 5 option vectors */ + + /* option vector 1: processor architectures supported */ + 3 - 1, /* length */ + 0, /* don't ignore, don't halt */ + OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 | + OV1_PPC_2_04 | OV1_PPC_2_05, + + /* option vector 2: Open Firmware options supported */ + 34 - 1, /* length */ + OV2_REAL_MODE, + 0, 0, + W(0xffffffff), /* real_base */ + W(0xffffffff), /* real_size */ + W(0xffffffff), /* virt_base */ + W(0xffffffff), /* virt_size */ + W(0xffffffff), /* load_base */ + W(64), /* 128MB min RMA */ + W(0xffffffff), /* full client load */ + 0, /* min RMA percentage of total RAM */ + 48, /* max log_2(hash table size) */ + + /* option vector 3: processor options supported */ + 3 - 1, /* length */ + 0, /* don't ignore, don't halt */ + OV3_FP | OV3_VMX, + + /* option vector 4: IBM PAPR implementation */ + 2 - 1, /* length */ + 0, /* don't halt */ + + /* option vector 5: PAPR/OF options */ + 3 - 1, /* length */ + 0, /* don't ignore, don't halt */ + OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES, +}; + +/* Old method - ELF header with PT_NOTE sections */ static struct fake_elf { Elf32_Ehdr elfhdr; Elf32_Phdr phdr[2]; @@ -728,8 +813,26 @@ static struct fake_elf { static void __init prom_send_capabilities(void) { - ihandle elfloader; + ihandle elfloader, root; + prom_arg_t ret; + root = call_prom("open", 1, 1, ADDR("/")); + if (root != 0) { + /* try calling the ibm,client-architecture-support method */ + if (call_prom_ret("call-method", 3, 2, &ret, + ADDR("ibm,client-architecture-support"), + ADDR(ibm_architecture_vec)) == 0) { + /* the call exists... */ + if (ret) + prom_printf("WARNING: ibm,client-architecture" + "-support call FAILED!\n"); + call_prom("close", 1, 0, root); + return; + } + call_prom("close", 1, 0, root); + } + + /* no ibm,client-architecture-support call, try the old way */ elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); if (elfloader == 0) { prom_printf("couldn't open /packages/elf-loader\n"); From d882995c054ff90706cc339321bfb04b15c5581f Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Sun, 23 Apr 2006 20:32:41 +0200 Subject: [PATCH 149/160] [PATCH] sound/ppc: snd_pmac_toonie_init should be __init snd_pmac_toonie_init is only called by __init code and calls __init code itself. Signed-off-by: Andreas Schwab Signed-off-by: Paul Mackerras --- sound/ppc/toonie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/ppc/toonie.c b/sound/ppc/toonie.c index 4e595172e423..1ac7c8552f50 100644 --- a/sound/ppc/toonie.c +++ b/sound/ppc/toonie.c @@ -335,7 +335,7 @@ static void toonie_cleanup(struct snd_pmac *chip) chip->mixer_data = NULL; } -int snd_pmac_toonie_init(struct snd_pmac *chip) +int __init snd_pmac_toonie_init(struct snd_pmac *chip) { struct pmac_toonie *mix; From f749edae5ebd339eaf22508572233600f717424f Mon Sep 17 00:00:00 2001 From: Alan Modra Date: Mon, 24 Apr 2006 22:11:51 +0930 Subject: [PATCH 150/160] [PATCH] powerpc64: Fix loading of modules without a .toc section Normally, ppc64 module .ko files contain a table-of-contents (.toc) section, but if the module doesn't reference any static or external data or external procedures, it is possible for gcc/binutils to generate a .ko that doesn't have a .toc. Currently the module loader refuses to load such a module, since it needs the address of the .toc section to use in relocations. This patch fixes the problem by using the address of the .stubs section instead, which is an acceptable substitute in this situation. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/module_64.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index 928b8581fcb0..ba34001fca8e 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -191,11 +191,19 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr, (void *)hdr + sechdrs[sechdrs[i].sh_link].sh_offset); } - if (!me->arch.stubs_section || !me->arch.toc_section) { - printk("%s: doesn't contain .toc or .stubs.\n", me->name); + + if (!me->arch.stubs_section) { + printk("%s: doesn't contain .stubs.\n", me->name); return -ENOEXEC; } + /* If we don't have a .toc, just use .stubs. We need to set r2 + to some reasonable value in case the module calls out to + other functions via a stub, or if a function pointer escapes + the module by some means. */ + if (!me->arch.toc_section) + me->arch.toc_section = me->arch.stubs_section; + /* Override the stubs size */ sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs); return 0; @@ -342,7 +350,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, break; case R_PPC64_TOC16: - /* Subtact TOC pointer */ + /* Subtract TOC pointer */ value -= my_r2(sechdrs, me); if (value + 0x8000 > 0xffff) { printk("%s: bad TOC16 relocation (%lu)\n", @@ -355,7 +363,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, break; case R_PPC64_TOC16_DS: - /* Subtact TOC pointer */ + /* Subtract TOC pointer */ value -= my_r2(sechdrs, me); if ((value & 3) != 0 || value + 0x8000 > 0xffff) { printk("%s: bad TOC16_DS relocation (%lu)\n", From 1269277a5e7c6d7ae1852e648a8bcdb78035e9fa Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 24 Apr 2006 23:22:17 +0100 Subject: [PATCH 151/160] [PATCH] powerpc: Use check_legacy_ioport() on ppc32 too. Some people report that we die on some Macs when we are expecting to catch machine checks after poking at some random I/O address. I'd seen it happen on my dual G4 with serial ports until we fixed those to use OF, but now other users are reporting it with i8042. This expands the use of check_legacy_ioport() to avoid that situation even on 32-bit kernels. Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup-common.c | 8 ++++++++ arch/powerpc/kernel/setup_64.c | 8 -------- drivers/block/floppy.c | 2 +- drivers/input/serio/i8042-io.h | 4 ++-- include/asm-powerpc/io.h | 6 +++--- 5 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 1d93e73a7003..684ab1d49c65 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -516,3 +516,11 @@ void probe_machine(void) printk(KERN_INFO "Using %s machine description\n", ppc_md.name); } + +int check_legacy_ioport(unsigned long base_port) +{ + if (ppc_md.check_legacy_ioport == NULL) + return 0; + return ppc_md.check_legacy_ioport(base_port); +} +EXPORT_SYMBOL(check_legacy_ioport); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 13e91c4d70a8..4467c49903b6 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -594,14 +594,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg) printk("[terminate]%04x %s\n", src, msg); } -int check_legacy_ioport(unsigned long base_port) -{ - if (ppc_md.check_legacy_ioport == NULL) - return 0; - return ppc_md.check_legacy_ioport(base_port); -} -EXPORT_SYMBOL(check_legacy_ioport); - void cpu_die(void) { if (ppc_md.cpu_die) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index bedb689b051f..dff1e67b1dd4 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4301,7 +4301,7 @@ static int __init floppy_init(void) } use_virtual_dma = can_use_virtual_dma & 1; -#if defined(CONFIG_PPC64) +#if defined(CONFIG_PPC_MERGE) if (check_legacy_ioport(FDC1)) { del_timer(&fd_timeout); err = -ENODEV; diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h index 9a9221644250..cc21914fbc72 100644 --- a/drivers/input/serio/i8042-io.h +++ b/drivers/input/serio/i8042-io.h @@ -67,14 +67,14 @@ static inline int i8042_platform_init(void) * On some platforms touching the i8042 data register region can do really * bad things. Because of this the region is always reserved on such boxes. */ -#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC64) +#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC_MERGE) if (!request_region(I8042_DATA_REG, 16, "i8042")) return -EBUSY; #endif i8042_reset = 1; -#if defined(CONFIG_PPC64) +#if defined(CONFIG_PPC_MERGE) if (check_legacy_ioport(I8042_DATA_REG)) return -EBUSY; if (!request_region(I8042_DATA_REG, 16, "i8042")) diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 68efbea379c9..f1c2469b8844 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -9,6 +9,9 @@ * 2 of the License, or (at your option) any later version. */ +/* Check of existence of legacy devices */ +extern int check_legacy_ioport(unsigned long base_port); + #ifndef CONFIG_PPC64 #include #else @@ -437,9 +440,6 @@ out: #define dma_cache_wback(_start,_size) do { } while (0) #define dma_cache_wback_inv(_start,_size) do { } while (0) -/* Check of existence of legacy devices */ -extern int check_legacy_ioport(unsigned long base_port); - /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem From 30aacebed0f0619f23ce84df7c59ad033ca08d77 Mon Sep 17 00:00:00 2001 From: Eugene Surovegin Date: Tue, 25 Apr 2006 01:22:44 -0700 Subject: [PATCH 152/160] [PATCH] ppc32: add 440GX erratum 440_43 workaround This patch adds workaround for PPC 440GX erratum 440_43. According to this erratum spurious MachineChecks (caused by L1 cache parity) can happen during DataTLB miss processing. We disable L1 cache parity checking for 440GX rev.C and rev.F Signed-off-by: Eugene Surovegin Signed-off-by: Paul Mackerras --- arch/ppc/platforms/4xx/ocotea.c | 2 +- arch/ppc/syslib/ibm440gx_common.c | 13 ++++++++++++- arch/ppc/syslib/ibm440gx_common.h | 4 ++++ include/asm-ppc/reg_booke.h | 1 + 4 files changed, 18 insertions(+), 2 deletions(-) diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index f841972f1fa9..554776d4b8ac 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -331,7 +331,7 @@ static void __init ocotea_init(void) void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { - ibm44x_platform_init(r3, r4, r5, r6, r7); + ibm440gx_platform_init(r3, r4, r5, r6, r7); ppc_md.setup_arch = ocotea_setup_arch; ppc_md.show_cpuinfo = ocotea_show_cpuinfo; diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c index a7dd55f1c63e..f6cc16888527 100644 --- a/arch/ppc/syslib/ibm440gx_common.c +++ b/arch/ppc/syslib/ibm440gx_common.c @@ -2,7 +2,7 @@ * PPC440GX system library * * Eugene Surovegin or - * Copyright (c) 2003, 2004 Zultys Technologies + * Copyright (c) 2003 - 2006 Zultys Technologies * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -282,3 +282,14 @@ int ibm440gx_show_cpuinfo(struct seq_file *m){ return 0; } +void __init ibm440gx_platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, + unsigned long r7) +{ + /* Erratum 440_43 workaround, disable L1 cache parity checking */ + if (!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C") || + !strcmp(cur_cpu_spec->cpu_name, "440GX Rev. F")) + mtspr(SPRN_CCR1, mfspr(SPRN_CCR1) | CCR1_DPC); + + ibm44x_platform_init(r3, r4, r5, r6, r7); +} diff --git a/arch/ppc/syslib/ibm440gx_common.h b/arch/ppc/syslib/ibm440gx_common.h index a2ab9fab8e34..a03ec6022e8f 100644 --- a/arch/ppc/syslib/ibm440gx_common.h +++ b/arch/ppc/syslib/ibm440gx_common.h @@ -29,6 +29,10 @@ void ibm440gx_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk, unsigned int ser_clk) __init; +/* common 440GX platform init */ +void ibm440gx_platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) __init; + /* Enable L2 cache */ void ibm440gx_l2c_enable(void) __init; diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h index 00ad9c754c78..4944c0fb8bea 100644 --- a/include/asm-ppc/reg_booke.h +++ b/include/asm-ppc/reg_booke.h @@ -237,6 +237,7 @@ do { \ #endif /* Bit definitions for CCR1. */ +#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ #define CCR1_TCS 0x00000080 /* Timer Clock Select */ /* Bit definitions for the MCSR. */ From 2833c28aa0d0326780acfa61149a2a02dcb2c9b4 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Thu, 27 Apr 2006 15:46:42 +0200 Subject: [PATCH 153/160] [PATCH] powerpc: Wire up *at syscalls Wire up *at syscalls. This patch has been tested on ppc64 (using glibc's testsuite, both 32bit and 64bit), and compile-tested for ppc32 (I have currently no ppc32 system available, but I expect no problems). Signed-off-by: Andreas Schwab Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/systbl.S | 13 +++++++++++++ arch/powerpc/platforms/cell/spu_callbacks.c | 13 +++++++++++++ fs/stat.c | 2 +- include/asm-powerpc/unistd.h | 20 +++++++++++++++++++- 4 files changed, 46 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S index 0b98eea73c5e..cf56a1d499ff 100644 --- a/arch/powerpc/kernel/systbl.S +++ b/arch/powerpc/kernel/systbl.S @@ -325,6 +325,19 @@ SYSCALL(unshare) SYSCALL(splice) SYSCALL(tee) SYSCALL(vmsplice) +COMPAT_SYS(openat) +SYSCALL(mkdirat) +SYSCALL(mknodat) +SYSCALL(fchownat) +COMPAT_SYS(futimesat) +SYSX(sys_newfstatat, sys_fstatat64, sys_fstatat64) +SYSCALL(unlinkat) +SYSCALL(renameat) +SYSCALL(linkat) +SYSCALL(symlinkat) +SYSCALL(readlinkat) +SYSCALL(fchmodat) +SYSCALL(faccessat) /* * please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c index b283380a2a18..95b36430aa0f 100644 --- a/arch/powerpc/platforms/cell/spu_callbacks.c +++ b/arch/powerpc/platforms/cell/spu_callbacks.c @@ -319,6 +319,19 @@ void *spu_syscall_table[] = { [__NR_splice] sys_splice, [__NR_tee] sys_tee, [__NR_vmsplice] sys_vmsplice, + [__NR_openat] sys_openat, + [__NR_mkdirat] sys_mkdirat, + [__NR_mknodat] sys_mknodat, + [__NR_fchownat] sys_fchownat, + [__NR_futimesat] sys_futimesat, + [__NR_newfstatat] sys_newfstatat, + [__NR_unlinkat] sys_unlinkat, + [__NR_renameat] sys_renameat, + [__NR_linkat] sys_linkat, + [__NR_symlinkat] sys_symlinkat, + [__NR_readlinkat] sys_readlinkat, + [__NR_fchmodat] sys_fchmodat, + [__NR_faccessat] sys_faccessat, }; long spu_sys_callback(struct spu_syscall_block *s) diff --git a/fs/stat.c b/fs/stat.c index 9948cc1685a4..0f282face322 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -261,7 +261,7 @@ asmlinkage long sys_newlstat(char __user *filename, struct stat __user *statbuf) return error; } -#ifndef __ARCH_WANT_STAT64 +#if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT) asmlinkage long sys_newfstatat(int dfd, char __user *filename, struct stat __user *statbuf, int flag) { diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h index 34325e292596..908acb44cb8a 100644 --- a/include/asm-powerpc/unistd.h +++ b/include/asm-powerpc/unistd.h @@ -304,8 +304,25 @@ #define __NR_splice 283 #define __NR_tee 284 #define __NR_vmsplice 285 +#define __NR_openat 286 +#define __NR_mkdirat 287 +#define __NR_mknodat 288 +#define __NR_fchownat 289 +#define __NR_futimesat 290 +#ifdef __powerpc64__ +#define __NR_newfstatat 291 +#else +#define __NR_fstatat64 291 +#endif +#define __NR_unlinkat 292 +#define __NR_renameat 293 +#define __NR_linkat 294 +#define __NR_symlinkat 295 +#define __NR_readlinkat 296 +#define __NR_fchmodat 297 +#define __NR_faccessat 298 -#define __NR_syscalls 286 +#define __NR_syscalls 299 #ifdef __KERNEL__ #define __NR__exit __NR_exit @@ -458,6 +475,7 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6 #ifdef CONFIG_PPC64 #define __ARCH_WANT_COMPAT_SYS_TIME #define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND +#define __ARCH_WANT_SYS_NEWFSTATAT #endif /* From a73c87bfe98f4d54c919e920a6efb0a116115722 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Tue, 25 Apr 2006 20:26:33 +0400 Subject: [PATCH 154/160] [PATCH] ppc32: odd fixes and improvements in ppc_sys This consists of offsets fix in ..._devices.c, and update of ppc_sys_fixup_mem_resource() function to prevent subsequent fixups Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/ppc/syslib/mpc8xx_devices.c | 25 +++++++++++++++++++------ arch/ppc/syslib/ppc_sys.c | 4 +++- arch/ppc/syslib/pq2_sys.c | 8 ++++---- include/asm-ppc/ppc_sys.h | 2 ++ 4 files changed, 28 insertions(+), 11 deletions(-) diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index bd41ed83beb3..6f536383866e 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -170,12 +170,18 @@ struct platform_device ppc_sys_platform_devices[] = { [MPC8xx_CPM_SMC1] = { .name = "fsl-cpm-smc", .id = 1, - .num_resources = 2, + .num_resources = 3, .resource = (struct resource[]) { { .name = "regs", - .start = 0xa82, - .end = 0xa91, + .start = 0xa80, + .end = 0xa8f, + .flags = IORESOURCE_MEM, + }, + { + .name = "pram", + .start = 0x3e80, + .end = 0x3ebf, .flags = IORESOURCE_MEM, }, { @@ -189,14 +195,21 @@ struct platform_device ppc_sys_platform_devices[] = { [MPC8xx_CPM_SMC2] = { .name = "fsl-cpm-smc", .id = 2, - .num_resources = 2, + .num_resources = 3, .resource = (struct resource[]) { { .name = "regs", - .start = 0xa92, - .end = 0xaa1, + .start = 0xa90, + .end = 0xa9f, .flags = IORESOURCE_MEM, }, + { + .name = "pram", + .start = 0x3f80, + .end = 0x3fbf, + .flags = IORESOURCE_MEM, + + }, { .name = "interrupt", .start = MPC8xx_INT_SMC2, diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index 7662c4e6e7d6..2d48018b71d9 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -109,9 +109,11 @@ ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr) int i; for (i = 0; i < pdev->num_resources; i++) { struct resource *r = &pdev->resource[i]; - if ((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) { + if (((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) && + ((r->flags & PPC_SYS_IORESOURCE_FIXUPPED) != PPC_SYS_IORESOURCE_FIXUPPED)) { r->start += paddr; r->end += paddr; + r->flags |= PPC_SYS_IORESOURCE_FIXUPPED; } } } diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c index 75e64f1c144d..433b0fa203e1 100644 --- a/arch/ppc/syslib/pq2_sys.c +++ b/arch/ppc/syslib/pq2_sys.c @@ -113,13 +113,13 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8248", .mask = 0x0000ff00, .value = 0x00000c00, - .num_devices = 11, + .num_devices = 12, .device_list = (enum ppc_sys_devices[]) { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, - MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1, - MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, - MPC82xx_CPM_USB, MPC82xx_SEC1, + MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4, + MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, + MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1, }, }, { diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h index 4b94f7059ebe..40f197af6508 100644 --- a/include/asm-ppc/ppc_sys.h +++ b/include/asm-ppc/ppc_sys.h @@ -39,6 +39,8 @@ #error "need definition of ppc_sys_devices" #endif +#define PPC_SYS_IORESOURCE_FIXUPPED 0x00000001 + struct ppc_sys_spec { /* PPC sys is matched via (ID & mask) == value, id could be * PVR, SVR, IMMR, * etc. */ From e27987cddd8db3a72a0f4734b5d94d06c7677323 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Tue, 25 Apr 2006 20:26:41 +0400 Subject: [PATCH 155/160] [PATCH] ppc32 CPM_UART: Convert to use platform devices This is intended to make the driver code more generic and flexible, to get rid of board-specific layouts within driver, and generic rehaul, yet keeping compatibility with the existing stuff utilizing it, being compatible with legacy behavior (but with complaints that legacy mode used). Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- drivers/serial/cpm_uart/cpm_uart.h | 16 +- drivers/serial/cpm_uart/cpm_uart_core.c | 269 +++++++++++++++++++----- drivers/serial/cpm_uart/cpm_uart_cpm1.c | 47 ----- drivers/serial/cpm_uart/cpm_uart_cpm2.c | 9 - 4 files changed, 225 insertions(+), 116 deletions(-) diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 73c8a088c160..17f2c7aa4503 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -10,6 +10,8 @@ #define CPM_UART_H #include +#include +#include #if defined(CONFIG_CPM2) #include "cpm_uart_cpm2.h" @@ -26,14 +28,14 @@ #define FLAG_SMC 0x00000002 #define FLAG_CONSOLE 0x00000001 -#define UART_SMC1 0 -#define UART_SMC2 1 -#define UART_SCC1 2 -#define UART_SCC2 3 -#define UART_SCC3 4 -#define UART_SCC4 5 +#define UART_SMC1 fsid_smc1_uart +#define UART_SMC2 fsid_smc2_uart +#define UART_SCC1 fsid_scc1_uart +#define UART_SCC2 fsid_scc2_uart +#define UART_SCC3 fsid_scc3_uart +#define UART_SCC4 fsid_scc4_uart -#define UART_NR 6 +#define UART_NR fs_uart_nr #define RX_NUM_FIFO 4 #define RX_BUF_SIZE 32 diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index b7bf4c698a47..9a5b044ce068 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include @@ -60,7 +61,7 @@ /* Track which ports are configured as uarts */ int cpm_uart_port_map[UART_NR]; /* How many ports did we config as uarts */ -int cpm_uart_nr; +int cpm_uart_nr = 0; /**************************************************************/ @@ -85,6 +86,37 @@ static inline void *cpm2cpu_addr(unsigned long addr) return bus_to_virt(addr); } +/* Place-holder for board-specific stuff */ +struct platform_device* __attribute__ ((weak)) __init +early_uart_get_pdev(int index) +{ + return NULL; +} + + +void cpm_uart_count(void) +{ + cpm_uart_nr = 0; +#ifdef CONFIG_SERIAL_CPM_SMC1 + cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1; +#endif +#ifdef CONFIG_SERIAL_CPM_SMC2 + cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2; +#endif +#ifdef CONFIG_SERIAL_CPM_SCC1 + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1; +#endif +#ifdef CONFIG_SERIAL_CPM_SCC2 + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2; +#endif +#ifdef CONFIG_SERIAL_CPM_SCC3 + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3; +#endif +#ifdef CONFIG_SERIAL_CPM_SCC4 + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4; +#endif +} + /* * Check, if transmit buffers are processed */ @@ -829,14 +861,6 @@ static int cpm_uart_request_port(struct uart_port *port) if (pinfo->flags & FLAG_CONSOLE) return 0; - /* - * Setup any port IO, connect any baud rate generators, - * etc. This is expected to be handled by board - * dependant code - */ - if (pinfo->set_lineif) - pinfo->set_lineif(pinfo); - if (IS_SMC(pinfo)) { pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); @@ -988,6 +1012,54 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { }, }; +int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) +{ + struct resource *r; + struct fs_uart_platform_info *pdata = pdev->dev.platform_data; + int idx = pdata->fs_no; /* It is UART_SMCx or UART_SCCx index */ + struct uart_cpm_port *pinfo; + int line; + u32 mem, pram; + + for (line=0; linefs_no; line++); + + pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx]; + + pinfo->brg = pdata->brg; + + if (!is_con) { + pinfo->port.line = line; + pinfo->port.flags = UPF_BOOT_AUTOCONF; + } + + if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"))) + return -EINVAL; + mem = r->start; + + if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram"))) + return -EINVAL; + pram = r->start; + + if(idx > fsid_smc2_uart) { + pinfo->sccp = (scc_t *)mem; + pinfo->sccup = (scc_uart_t *)pram; + } else { + pinfo->smcp = (smc_t *)mem; + pinfo->smcup = (smc_uart_t *)pram; + } + pinfo->tx_nrfifos = pdata->tx_num_fifo; + pinfo->tx_fifosize = pdata->tx_buf_size; + + pinfo->rx_nrfifos = pdata->rx_num_fifo; + pinfo->rx_fifosize = pdata->rx_buf_size; + + pinfo->port.uartclk = pdata->uart_clk; + pinfo->port.mapbase = (unsigned long)mem; + pinfo->port.irq = platform_get_irq(pdev, 0); + + return 0; +} + #ifdef CONFIG_SERIAL_CPM_CONSOLE /* * Print a string to the serial port trying not to disturb @@ -1067,9 +1139,7 @@ static void cpm_uart_console_write(struct console *co, const char *s, pinfo->tx_cur = (volatile cbd_t *) bdp; } -/* - * Setup console. Be careful is called early ! - */ + static int __init cpm_uart_console_setup(struct console *co, char *options) { struct uart_port *port; @@ -1080,9 +1150,27 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) int flow = 'n'; int ret; + struct fs_uart_platform_info *pdata; + struct platform_device* pdev = early_uart_get_pdev(co->index); + port = (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]]; pinfo = (struct uart_cpm_port *)port; + if (!pdev) { + pr_info("cpm_uart: console: compat mode\n"); + /* compatibility - will be cleaned up */ + cpm_uart_init_portdesc(); + + if (pinfo->set_lineif) + pinfo->set_lineif(pinfo); + } else { + pdata = pdev->dev.platform_data; + if (pdata) + if (pdata->init_ioports) + pdata->init_ioports(); + + cpm_uart_drv_get_platform_data(pdev, 1); + } pinfo->flags |= FLAG_CONSOLE; @@ -1097,14 +1185,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) baud = 9600; } - /* - * Setup any port IO, connect any baud rate generators, - * etc. This is expected to be handled by board - * dependant code - */ - if (pinfo->set_lineif) - pinfo->set_lineif(pinfo); - if (IS_SMC(pinfo)) { pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); @@ -1143,11 +1223,8 @@ static struct console cpm_scc_uart_console = { int __init cpm_uart_console_init(void) { - int ret = cpm_uart_init_portdesc(); - - if (!ret) - register_console(&cpm_scc_uart_console); - return ret; + register_console(&cpm_scc_uart_console); + return 0; } console_initcall(cpm_uart_console_init); @@ -1165,44 +1242,130 @@ static struct uart_driver cpm_reg = { .minor = SERIAL_CPM_MINOR, .cons = CPM_UART_CONSOLE, }; - -static int __init cpm_uart_init(void) +static int cpm_uart_drv_probe(struct device *dev) { - int ret, i; + struct platform_device *pdev = to_platform_device(dev); + struct fs_uart_platform_info *pdata; + int ret = -ENODEV; - printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n"); - -#ifndef CONFIG_SERIAL_CPM_CONSOLE - ret = cpm_uart_init_portdesc(); - if (ret) + if(!pdev) { + printk(KERN_ERR"CPM UART: platform data missing!\n"); return ret; -#endif - - cpm_reg.nr = cpm_uart_nr; - ret = uart_register_driver(&cpm_reg); - - if (ret) - return ret; - - for (i = 0; i < cpm_uart_nr; i++) { - int con = cpm_uart_port_map[i]; - cpm_uart_ports[con].port.line = i; - cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF; - uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port); } + pdata = pdev->dev.platform_data; + pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", + cpm_uart_port_map[pdata->fs_no]); + + if ((ret = cpm_uart_drv_get_platform_data(pdev, 0))) + return ret; + + if (pdata->init_ioports) + pdata->init_ioports(); + + ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port); + + return ret; +} + +static int cpm_uart_drv_remove(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fs_uart_platform_info *pdata = pdev->dev.platform_data; + + pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n", + cpm_uart_port_map[pdata->fs_no]); + + uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port); + return 0; +} + +static struct device_driver cpm_smc_uart_driver = { + .name = "fsl-cpm-smc:uart", + .bus = &platform_bus_type, + .probe = cpm_uart_drv_probe, + .remove = cpm_uart_drv_remove, +}; + +static struct device_driver cpm_scc_uart_driver = { + .name = "fsl-cpm-scc:uart", + .bus = &platform_bus_type, + .probe = cpm_uart_drv_probe, + .remove = cpm_uart_drv_remove, +}; + +/* + This is supposed to match uart devices on platform bus, + */ +static int match_is_uart (struct device* dev, void* data) +{ + struct platform_device* pdev = container_of(dev, struct platform_device, dev); + int ret = 0; + /* this was setfunc as uart */ + if(strstr(pdev->name,":uart")) { + ret = 1; + } + return ret; +} + + +static int cpm_uart_init(void) { + + int ret; + int i; + struct device *dev; + printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n"); + + /* lookup the bus for uart devices */ + dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart); + + /* There are devices on the bus - all should be OK */ + if (dev) { + cpm_uart_count(); + cpm_reg.nr = cpm_uart_nr; + + if (!(ret = uart_register_driver(&cpm_reg))) { + if ((ret = driver_register(&cpm_smc_uart_driver))) { + uart_unregister_driver(&cpm_reg); + return ret; + } + if ((ret = driver_register(&cpm_scc_uart_driver))) { + driver_unregister(&cpm_scc_uart_driver); + uart_unregister_driver(&cpm_reg); + } + } + } else { + /* No capable platform devices found - falling back to legacy mode */ + pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n"); + pr_info( + "cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n"); +#ifndef CONFIG_SERIAL_CPM_CONSOLE + ret = cpm_uart_init_portdesc(); + if (ret) + return ret; +#endif + + cpm_reg.nr = cpm_uart_nr; + ret = uart_register_driver(&cpm_reg); + + if (ret) + return ret; + + for (i = 0; i < cpm_uart_nr; i++) { + int con = cpm_uart_port_map[i]; + cpm_uart_ports[con].port.line = i; + cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF; + uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port); + } + + } return ret; } static void __exit cpm_uart_exit(void) { - int i; - - for (i = 0; i < cpm_uart_nr; i++) { - int con = cpm_uart_port_map[i]; - uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port); - } - + driver_unregister(&cpm_scc_uart_driver); + driver_unregister(&cpm_smc_uart_driver); uart_unregister_driver(&cpm_reg); } diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index d789ee55cbb7..31223aa862f5 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -81,58 +81,11 @@ void cpm_line_cr_cmd(int line, int cmd) void smc1_lineif(struct uart_cpm_port *pinfo) { - volatile cpm8xx_t *cp = cpmp; - - (void)cp; /* fix warning */ -#if defined (CONFIG_MPC885ADS) - /* Enable SMC1 transceivers */ - { - cp->cp_pepar |= 0x000000c0; - cp->cp_pedir &= ~0x000000c0; - cp->cp_peso &= ~0x00000040; - cp->cp_peso |= 0x00000080; - } -#elif defined (CONFIG_MPC86XADS) - unsigned int iobits = 0x000000c0; - - if (!pinfo->is_portb) { - cp->cp_pbpar |= iobits; - cp->cp_pbdir &= ~iobits; - cp->cp_pbodr &= ~iobits; - } else { - ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits; - ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits; - ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; - } -#endif pinfo->brg = 1; } void smc2_lineif(struct uart_cpm_port *pinfo) { - volatile cpm8xx_t *cp = cpmp; - - (void)cp; /* fix warning */ -#if defined (CONFIG_MPC885ADS) - cp->cp_pepar |= 0x00000c00; - cp->cp_pedir &= ~0x00000c00; - cp->cp_peso &= ~0x00000400; - cp->cp_peso |= 0x00000800; -#elif defined (CONFIG_MPC86XADS) - unsigned int iobits = 0x00000c00; - - if (!pinfo->is_portb) { - cp->cp_pbpar |= iobits; - cp->cp_pbdir &= ~iobits; - cp->cp_pbodr &= ~iobits; - } else { - ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits; - ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits; - ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; - } - -#endif - pinfo->brg = 2; } diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index fd9e53ed3feb..c9c3b1d8810b 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -142,21 +142,12 @@ void scc2_lineif(struct uart_cpm_port *pinfo) * be supported in a sane fashion. */ #ifndef CONFIG_STX_GP3 -#ifdef CONFIG_MPC8560_ADS - volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; - io->iop_ppard |= 0x00000018; - io->iop_psord &= ~0x00000008; /* Rx */ - io->iop_psord &= ~0x00000010; /* Tx */ - io->iop_pdird &= ~0x00000008; /* Rx */ - io->iop_pdird |= 0x00000010; /* Tx */ -#else volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; io->iop_pparb |= 0x008b0000; io->iop_pdirb |= 0x00880000; io->iop_psorb |= 0x00880000; io->iop_pdirb &= ~0x00030000; io->iop_psorb &= ~0x00030000; -#endif #endif cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff; cpm2_immr->im_cpmux.cmx_scr |= 0x00090000; From 4427d6bf966379304f77b7cc8c92421e6bb95483 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Tue, 25 Apr 2006 20:26:43 +0400 Subject: [PATCH 156/160] [PATCH] ppc32: Update board-specific code of the CPM UART users This has the relevant updates/additions to the BSP code so that proper platform_info struct well be passed to the CPM UART drivers. The changes covered mpc866ads, mpc885ads and mpc8272ads. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/ppc/platforms/mpc8272ads_setup.c | 114 +++++++++++++++++++++ arch/ppc/platforms/mpc866ads_setup.c | 140 ++++++++++++++++++++++++++ arch/ppc/platforms/mpc885ads_setup.c | 131 ++++++++++++++++++++++++ arch/ppc/platforms/pq2ads.c | 31 +++++- 4 files changed, 415 insertions(+), 1 deletion(-) diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c index bc9b94f77e39..e62b75707f7a 100644 --- a/arch/ppc/platforms/mpc8272ads_setup.c +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -26,11 +26,35 @@ #include #include #include +#include #include "pq2ads_pd.h" static void init_fcc1_ioports(void); static void init_fcc2_ioports(void); +static void init_scc1_uart_ioports(void); +static void init_scc4_uart_ioports(void); + +static struct fs_uart_platform_info mpc8272_uart_pdata[] = { + [fsid_scc1_uart] = { + .init_ioports = init_scc1_uart_ioports, + .fs_no = fsid_scc1_uart, + .brg = 1, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, + [fsid_scc4_uart] = { + .init_ioports = init_scc4_uart_ioports, + .fs_no = fsid_scc4_uart, + .brg = 4, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, +}; static struct fs_mii_bus_info mii_bus_info = { .method = fsmii_bitbang, @@ -201,6 +225,55 @@ static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev, } } +static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev, + int idx) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + int num = ARRAY_SIZE(mpc8272_uart_pdata); + int id = fs_uart_id_scc2fsid(idx); + + /* no need to alter anything if console */ + if ((id <= num) && (!pdev->dev.platform_data)) { + pinfo = &mpc8272_uart_pdata[id]; + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + } +} + +static void init_scc1_uart_ioports(void) +{ + cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); + + /* SCC1 is only on port D */ + setbits32(&immap->im_ioport.iop_ppard,0x00000003); + clrbits32(&immap->im_ioport.iop_psord,0x00000001); + setbits32(&immap->im_ioport.iop_psord,0x00000002); + clrbits32(&immap->im_ioport.iop_pdird,0x00000001); + setbits32(&immap->im_ioport.iop_pdird,0x00000002); + + /* Wire BRG1 to SCC1 */ + clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff); + + iounmap(immap); +} + +static void init_scc4_uart_ioports(void) +{ + cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); + + setbits32(&immap->im_ioport.iop_ppard,0x00000600); + clrbits32(&immap->im_ioport.iop_psord,0x00000600); + clrbits32(&immap->im_ioport.iop_pdird,0x00000200); + setbits32(&immap->im_ioport.iop_pdird,0x00000400); + + /* Wire BRG4 to SCC4 */ + clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff); + setbits32(&immap->im_cpmux.cmx_scr,0x0000001b); + + iounmap(immap); +} + static int mpc8272ads_platform_notify(struct device *dev) { static const struct platform_notify_dev_map dev_map[] = { @@ -208,6 +281,10 @@ static int mpc8272ads_platform_notify(struct device *dev) .bus_id = "fsl-cpm-fcc", .rtn = mpc8272ads_fixup_enet_pdata }, + { + .bus_id = "fsl-cpm-scc:uart", + .rtn = mpc + }, { .bus_id = NULL } @@ -230,7 +307,44 @@ int __init mpc8272ads_init(void) ppc_sys_device_enable(MPC82xx_CPM_FCC1); ppc_sys_device_enable(MPC82xx_CPM_FCC2); + /* to be ready for console, let's attach pdata here */ +#ifdef CONFIG_SERIAL_CPM_SCC1 + ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART); + ppc_sys_device_enable(MPC82xx_CPM_SCC1); + +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC4 + ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART); + ppc_sys_device_enable(MPC82xx_CPM_SCC4); +#endif + + return 0; } +/* + To prevent confusion, console selection is gross: + by 0 assumed SCC1 and by 1 assumed SCC4 + */ +struct platform_device* early_uart_get_pdev(int index) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + + struct platform_device* pdev = NULL; + if(index) { /*assume SCC4 here*/ + pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4]; + pinfo = &mpc8272_uart_pdata[1]; + } else { /*over SCC1*/ + pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1]; + pinfo = &mpc8272_uart_pdata[0]; + } + + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR); + return NULL; +} + arch_initcall(mpc8272ads_init); diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index ac8fcc68afeb..6ce3b842defe 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -20,6 +20,7 @@ #include #include +#include #include #include @@ -37,6 +38,11 @@ extern unsigned char __res[]; +static void setup_fec1_ioports(void); +static void setup_scc1_ioports(void); +static void setup_smc1_ioports(void); +static void setup_smc2_ioports(void); + static struct fs_mii_bus_info fec_mii_bus_info = { .method = fsmii_fec, .id = 0, @@ -79,6 +85,28 @@ static struct fs_platform_info mpc8xx_scc_pdata = { .phy_irq = -1, .bus_info = &scc_mii_bus_info, + +}; + +static struct fs_uart_platform_info mpc866_uart_pdata[] = { + [fsid_smc1_uart] = { + .brg = 1, + .fs_no = fsid_smc1_uart, + .init_ioports = setup_smc1_ioports, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, + [fsid_smc2_uart] = { + .brg = 2, + .fs_no = fsid_smc2_uart, + .init_ioports = setup_smc2_ioports, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, }; void __init board_init(void) @@ -92,9 +120,12 @@ void __init board_init(void) printk(KERN_CRIT "Could not remap BCSR1\n"); return; } + #ifdef CONFIG_SERIAL_CPM_SMC1 cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ clrbits32(bcsr_io,(0x80000000 >> 7)); + cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX); + cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); #else setbits32(bcsr_io,(0x80000000 >> 7)); @@ -108,6 +139,8 @@ void __init board_init(void) cp->cp_simode &= ~(0xe0000000 >> 1); cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ clrbits32(bcsr_io,(0x80000000 >> 13)); + cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX); + cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); #else clrbits32(bcsr_io,(0x80000000 >> 13)); cp->cp_pbpar &= ~(0x00000c00); @@ -232,6 +265,74 @@ static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); } +static void setup_smc1_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + unsigned int iobits = 0x000000c0; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + + clrbits32(bcsr_io,BCSR1_RS232EN_1); + iounmap(bcsr_io); + + setbits32(&immap->im_cpm.cp_pbpar, iobits); + clrbits32(&immap->im_cpm.cp_pbdir, iobits); + clrbits16(&immap->im_cpm.cp_pbodr, iobits); + +} + +static void setup_smc2_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + unsigned int iobits = 0x00000c00; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + + clrbits32(bcsr_io,BCSR1_RS232EN_2); + + iounmap(bcsr_io); + +#ifndef CONFIG_SERIAL_CPM_ALT_SMC2 + setbits32(&immap->im_cpm.cp_pbpar, iobits); + clrbits32(&immap->im_cpm.cp_pbdir, iobits); + clrbits16(&immap->im_cpm.cp_pbodr, iobits); +#else + setbits16(&immap->im_ioport.iop_papar, iobits); + clrbits16(&immap->im_ioport.iop_padir, iobits); + clrbits16(&immap->im_ioport.iop_paodr, iobits); +#endif + +} + +static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev, + int idx) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + int num = ARRAY_SIZE(mpc866_uart_pdata); + + int id = fs_uart_id_smc2fsid(idx); + + /* no need to alter anything if console */ + if ((id <= num) && (!pdev->dev.platform_data)) { + pinfo = &mpc866_uart_pdata[id]; + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + } +} + static int mpc866ads_platform_notify(struct device *dev) { static const struct platform_notify_dev_map dev_map[] = { @@ -243,6 +344,10 @@ static int mpc866ads_platform_notify(struct device *dev) .bus_id = "fsl-cpm-scc", .rtn = mpc866ads_fixup_scc_enet_pdata, }, + { + .bus_id = "fsl-cpm-smc:uart", + .rtn = mpc866ads_fixup_uart_pdata + }, { .bus_id = NULL } @@ -267,7 +372,42 @@ int __init mpc866ads_init(void) #endif ppc_sys_device_enable(MPC8xx_CPM_FEC1); +/* Since either of the uarts could be used as console, they need to ready */ +#ifdef CONFIG_SERIAL_CPM_SMC1 + ppc_sys_device_enable(MPC8xx_CPM_SMC1); + ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); +#endif + +#ifdef CONFIG_SERIAL_CPM_SMCer + ppc_sys_device_enable(MPC8xx_CPM_SMC2); + ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); +#endif + return 0; } +/* + To prevent confusion, console selection is gross: + by 0 assumed SMC1 and by 1 assumed SMC2 + */ +struct platform_device* early_uart_get_pdev(int index) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + + struct platform_device* pdev = NULL; + if(index) { /*assume SMC2 here*/ + pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2]; + pinfo = &mpc866_uart_pdata[1]; + } else { /*over SMC1*/ + pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1]; + pinfo = &mpc866_uart_pdata[0]; + } + + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR); + return NULL; +} + arch_initcall(mpc866ads_init); diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c index 50a99e5f7c68..4b88679cd31c 100644 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -20,6 +20,7 @@ #include #include +#include #include #include @@ -35,9 +36,32 @@ #include extern unsigned char __res[]; +static void setup_smc1_ioports(void); +static void setup_smc2_ioports(void); static void __init mpc885ads_scc_phy_init(char); +static struct fs_uart_platform_info mpc885_uart_pdata[] = { + [fsid_smc1_uart] = { + .brg = 1, + .fs_no = fsid_smc1_uart, + .init_ioports = setup_smc1_ioports, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, + [fsid_smc2_uart] = { + .brg = 2, + .fs_no = fsid_smc2_uart, + .init_ioports = setup_smc2_ioports, + .tx_num_fifo = 4, + .tx_buf_size = 32, + .rx_num_fifo = 4, + .rx_buf_size = 32, + }, +}; + static struct fs_mii_bus_info fec_mii_bus_info = { .method = fsmii_fec, .id = 0, @@ -116,6 +140,8 @@ void __init board_init(void) #ifdef CONFIG_SERIAL_CPM_SMC1 cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ clrbits32(bcsr_io, BCSR1_RS232EN_1); + cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX); + cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); #else setbits32(bcsr_io,BCSR1_RS232EN_1); cp->cp_smc[0].smc_smcmr = 0; @@ -126,6 +152,8 @@ void __init board_init(void) cp->cp_simode &= ~(0xe0000000 >> 1); cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ clrbits32(bcsr_io,BCSR1_RS232EN_2); + cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX); + cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); #else setbits32(bcsr_io,BCSR1_RS232EN_2); cp->cp_smc[1].smc_smcmr = 0; @@ -343,6 +371,70 @@ static void mpc885ads_scc_phy_init(char phy_addr) out_be32(&fecp->fec_mii_speed, 0); } +static void setup_smc1_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + unsigned int iobits = 0x000000c0; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + clrbits32(bcsr_io,BCSR1_RS232EN_1); + iounmap(bcsr_io); + + setbits32(&immap->im_cpm.cp_pbpar, iobits); + clrbits32(&immap->im_cpm.cp_pbdir, iobits); + clrbits16(&immap->im_cpm.cp_pbodr, iobits); +} + +static void setup_smc2_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + unsigned int iobits = 0x00000c00; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + clrbits32(bcsr_io,BCSR1_RS232EN_2); + iounmap(bcsr_io); + +#ifndef CONFIG_SERIAL_CPM_ALT_SMC2 + setbits32(&immap->im_cpm.cp_pbpar, iobits); + clrbits32(&immap->im_cpm.cp_pbdir, iobits); + clrbits16(&immap->im_cpm.cp_pbodr, iobits); +#else + setbits16(&immap->im_ioport.iop_papar, iobits); + clrbits16(&immap->im_ioport.iop_padir, iobits); + clrbits16(&immap->im_ioport.iop_paodr, iobits); +#endif +} + +static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev, + int idx) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + int num = ARRAY_SIZE(mpc885_uart_pdata); + + int id = fs_uart_id_smc2fsid(idx); + + /* no need to alter anything if console */ + if ((id <= num) && (!pdev->dev.platform_data)) { + pinfo = &mpc885_uart_pdata[id]; + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + } +} + + static int mpc885ads_platform_notify(struct device *dev) { @@ -355,6 +447,10 @@ static int mpc885ads_platform_notify(struct device *dev) .bus_id = "fsl-cpm-scc", .rtn = mpc885ads_fixup_scc_enet_pdata, }, + { + .bus_id = "fsl-cpm-smc:uart", + .rtn = mpc885ads_fixup_uart_pdata + }, { .bus_id = NULL } @@ -362,6 +458,7 @@ static int mpc885ads_platform_notify(struct device *dev) platform_notify_map(dev_map,dev); + return 0; } int __init mpc885ads_init(void) @@ -383,7 +480,41 @@ int __init mpc885ads_init(void) ppc_sys_device_enable(MPC8xx_CPM_FEC2); #endif +#ifdef CONFIG_SERIAL_CPM_SMC1 + ppc_sys_device_enable(MPC8xx_CPM_SMC1); + ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + ppc_sys_device_enable(MPC8xx_CPM_SMC2); + ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); +#endif return 0; } arch_initcall(mpc885ads_init); + +/* + To prevent confusion, console selection is gross: + by 0 assumed SMC1 and by 1 assumed SMC2 + */ +struct platform_device* early_uart_get_pdev(int index) +{ + bd_t *bd = (bd_t *) __res; + struct fs_uart_platform_info *pinfo; + + struct platform_device* pdev = NULL; + if(index) { /*assume SMC2 here*/ + pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2]; + pinfo = &mpc885_uart_pdata[1]; + } else { /*over SMC1*/ + pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1]; + pinfo = &mpc885_uart_pdata[0]; + } + + pinfo->uart_clk = bd->bi_intfreq; + pdev->dev.platform_data = pinfo; + ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR); + return NULL; +} + diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c index 3365fd788a7a..7fc2e02f5246 100644 --- a/arch/ppc/platforms/pq2ads.c +++ b/arch/ppc/platforms/pq2ads.c @@ -14,11 +14,40 @@ #include +#include #include +#include +#include void __init m82xx_board_setup(void) { + cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); + u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32)); + /* Enable the 2nd UART port */ - *(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_RS232_EN2; + clrbits32(bcsr, BCSR1_RS232_EN2); + +#ifdef CONFIG_SERIAL_CPM_SCC1 + clrbits32((u32*)&immap->im_scc[0].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32*)&immap->im_scc[0].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC2 + clrbits32((u32*)&immap->im_scc[1].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32*)&immap->im_scc[1].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC3 + clrbits32((u32*)&immap->im_scc[2].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32*)&immap->im_scc[2].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC4 + clrbits32((u32*)&immap->im_scc[3].scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32((u32*)&immap->im_scc[3].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + + iounmap(bcsr); + iounmap(immap); } From 09b03b6c29638eb5c79b02e585cb1b20d91a8ea0 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Tue, 25 Apr 2006 20:26:46 +0400 Subject: [PATCH 157/160] [PATCH] ppc32 CPM_UART: Fixed odd address translations Current address translation methods can produce wrong results, because virt_to_bus and vice versa may not produce correct offsets on dma-allocated memory. The right way is, while tracking both phys and virt address of the window that has been allocated for boffer descriptors, and use those numbers to compute the offset and make translation properly. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- drivers/serial/cpm_uart/cpm_uart.h | 33 +++++++++++++++++++++++++ drivers/serial/cpm_uart/cpm_uart_core.c | 31 +++++++---------------- drivers/serial/cpm_uart/cpm_uart_cpm1.c | 7 +++--- drivers/serial/cpm_uart/cpm_uart_cpm2.c | 5 +++- 4 files changed, 50 insertions(+), 26 deletions(-) diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 17f2c7aa4503..aa5eb7ddeda9 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -66,6 +66,7 @@ struct uart_cpm_port { uint dp_addr; void *mem_addr; dma_addr_t dma_addr; + u32 mem_size; /* helpers */ int baud; int bits; @@ -92,4 +93,36 @@ void scc2_lineif(struct uart_cpm_port *pinfo); void scc3_lineif(struct uart_cpm_port *pinfo); void scc4_lineif(struct uart_cpm_port *pinfo); +/* + virtual to phys transtalion +*/ +static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = (u32)addr; + /* sane check */ + if ((val >= (u32)pinfo->mem_addr) && + (val<((u32)pinfo->mem_addr + pinfo->mem_size))) { + offset = val - (u32)pinfo->mem_addr; + return pinfo->dma_addr+offset; + } + printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val); + return 0; +} + +static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = addr; + /* sane check */ + if ((val >= pinfo->dma_addr) && + (val<(pinfo->dma_addr + pinfo->mem_size))) { + offset = val - (u32)pinfo->dma_addr; + return (void*)(pinfo->mem_addr+offset); + } + printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val); + return 0; +} + + #endif /* CPM_UART_H */ diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 9a5b044ce068..ced193bf9e1e 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -72,19 +72,6 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo); /**************************************************************/ -static inline unsigned long cpu2cpm_addr(void *addr) -{ - if ((unsigned long)addr >= CPM_ADDR) - return (unsigned long)addr; - return virt_to_bus(addr); -} - -static inline void *cpm2cpu_addr(unsigned long addr) -{ - if (addr >= CPM_ADDR) - return (void *)addr; - return bus_to_virt(addr); -} /* Place-holder for board-specific stuff */ struct platform_device* __attribute__ ((weak)) __init @@ -290,7 +277,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs) } /* get pointer */ - cp = cpm2cpu_addr(bdp->cbd_bufaddr); + cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); /* loop through the buffer */ while (i-- > 0) { @@ -633,7 +620,7 @@ static int cpm_uart_tx_pump(struct uart_port *port) /* Pick next descriptor and fill from buffer */ bdp = pinfo->tx_cur; - p = cpm2cpu_addr(bdp->cbd_bufaddr); + p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); *p++ = port->x_char; bdp->cbd_datlen = 1; @@ -660,7 +647,7 @@ static int cpm_uart_tx_pump(struct uart_port *port) while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) { count = 0; - p = cpm2cpu_addr(bdp->cbd_bufaddr); + p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); while (count < pinfo->tx_fifosize) { *p++ = xmit->buf[xmit->tail]; xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -709,12 +696,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo) mem_addr = pinfo->mem_addr; bdp = pinfo->rx_cur = pinfo->rx_bd_base; for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { - bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr); + bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo); bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT; mem_addr += pinfo->rx_fifosize; } - bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr); + bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo); bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; /* Set the physical address of the host memory @@ -724,12 +711,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo) mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); bdp = pinfo->tx_cur = pinfo->tx_bd_base; for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { - bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr); + bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo); bdp->cbd_sc = BD_SC_INTRPT; mem_addr += pinfo->tx_fifosize; } - bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr); + bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo); bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT; } @@ -1099,7 +1086,7 @@ static void cpm_uart_console_write(struct console *co, const char *s, * If the buffer address is in the CPM DPRAM, don't * convert it. */ - cp = cpm2cpu_addr(bdp->cbd_bufaddr); + cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); *cp = *s; @@ -1116,7 +1103,7 @@ static void cpm_uart_console_write(struct console *co, const char *s, while ((bdp->cbd_sc & BD_SC_READY) != 0) ; - cp = cpm2cpu_addr(bdp->cbd_bufaddr); + cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); *cp = 13; bdp->cbd_datlen = 1; diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 31223aa862f5..a5a30622637a 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -144,7 +144,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) /* was hostalloc but changed cause it blows away the */ /* large tlb mapping when pinning the kernel area */ mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8)); - dma_addr = 0; + dma_addr = (u32)mem_addr; } else mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr, GFP_KERNEL); @@ -157,8 +157,9 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) } pinfo->dp_addr = dp_offset; - pinfo->mem_addr = mem_addr; - pinfo->dma_addr = dma_addr; + pinfo->mem_addr = mem_addr; /* virtual address*/ + pinfo->dma_addr = dma_addr; /* physical address*/ + pinfo->mem_size = memsz; pinfo->rx_buf = mem_addr; pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index c9c3b1d8810b..7c6b07aeea92 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -209,8 +209,10 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); - if (is_con) + if (is_con) { mem_addr = alloc_bootmem(memsz); + dma_addr = mem_addr; + } else mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr, GFP_KERNEL); @@ -225,6 +227,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) pinfo->dp_addr = dp_offset; pinfo->mem_addr = mem_addr; pinfo->dma_addr = dma_addr; + pinfo->mem_size = memsz; pinfo->rx_buf = mem_addr; pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos From 03054d51a70e8c273df5d9bc31fea6c843eaa1c3 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Apr 2006 09:51:06 +1000 Subject: [PATCH 158/160] [PATCH] powerpc: Add cputable entry for POWER6 Add a cputable entry for the POWER6 processor. The SIHV and SIPR bits in the mmcra have moved in POWER6, so disable support for that until oprofile is fixed. Also tell firmware that we know about POWER6. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 16 ++++++++++++++++ arch/powerpc/kernel/prom_init.c | 1 + include/asm-powerpc/cputable.h | 14 ++++++++++---- 3 files changed, 27 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 39e348a3ade2..3f7182db9ed5 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -57,6 +57,8 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) #define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) +#define COMMON_USER_POWER6 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\ + PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) #define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \ PPC_FEATURE_BOOKE) @@ -263,6 +265,20 @@ struct cpu_spec cpu_specs[] = { .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power5+", }, + { /* Power6 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x003e0000, + .cpu_name = "POWER6", + .cpu_features = CPU_FTRS_POWER6, + .cpu_user_features = COMMON_USER_POWER6, + .icache_bsize = 128, + .dcache_bsize = 128, + .num_pmcs = 6, + .cpu_setup = __setup_cpu_power4, + .oprofile_cpu_type = "ppc64/power6", + .oprofile_type = PPC_OPROFILE_POWER4, + .platform = "power6", + }, { /* Cell Broadband Engine */ .pvr_mask = 0xffff0000, .pvr_value = 0x00700000, diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 00ad7f981a0d..078fb5533541 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -686,6 +686,7 @@ static void __init early_cmdline_parse(void) */ static unsigned char ibm_architecture_vec[] = { W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */ + W(0xffff0000), W(0x003e0000), /* POWER6 */ W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */ 5 - 1, /* 5 option vectors */ diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 4321483cce51..9fcf0162d859 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -22,6 +22,7 @@ #define PPC_FEATURE_BOOKE 0x00008000 #define PPC_FEATURE_SMT 0x00004000 #define PPC_FEATURE_ICACHE_SNOOP 0x00002000 +#define PPC_FEATURE_ARCH_2_05 0x00001000 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ @@ -320,6 +321,11 @@ extern void do_cpu_ftr_fixups(unsigned long offset); CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_MMCRA_SIHV | CPU_FTR_PURR) +#define CPU_FTRS_POWER6 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE) #define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -331,8 +337,8 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #ifdef __powerpc64__ #define CPU_FTRS_POSSIBLE \ (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ - CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_CELL | \ - CPU_FTR_CI_LARGE_PAGE) + CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ + CPU_FTRS_CELL | CPU_FTR_CI_LARGE_PAGE) #else enum { CPU_FTRS_POSSIBLE = @@ -376,8 +382,8 @@ enum { #ifdef __powerpc64__ #define CPU_FTRS_ALWAYS \ (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ - CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_CELL & \ - CPU_FTRS_POSSIBLE) + CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \ + CPU_FTRS_CELL & CPU_FTRS_POSSIBLE) #else enum { CPU_FTRS_ALWAYS = From f807221dedbd30726c5dffcd5b5d22ce0ea683cb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 29 Apr 2006 02:40:21 +0200 Subject: [PATCH 159/160] [PATCH] spufs: Disable local interrupts for SPE hash_page calls. This patch disables and saves local interrupts during hash_page processing for SPE contexts. We have to do it explicitly in the spu_irq_class_1_bottom function. For the interrupt handlers, we get the behaviour implicitly by using SA_INTERRUPT to disable interrupts while in the handler. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 269dda4fd0b4..ef47a6239d48 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -306,19 +306,19 @@ spu_request_irqs(struct spu *spu) snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number); ret = request_irq(irq_base + spu->isrc, - spu_irq_class_0, 0, spu->irq_c0, spu); + spu_irq_class_0, SA_INTERRUPT, spu->irq_c0, spu); if (ret) goto out; snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number); ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, - spu_irq_class_1, 0, spu->irq_c1, spu); + spu_irq_class_1, SA_INTERRUPT, spu->irq_c1, spu); if (ret) goto out1; snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number); ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, - spu_irq_class_2, 0, spu->irq_c2, spu); + spu_irq_class_2, SA_INTERRUPT, spu->irq_c2, spu); if (ret) goto out2; goto out; @@ -487,10 +487,14 @@ int spu_irq_class_1_bottom(struct spu *spu) ea = spu->dar; dsisr = spu->dsisr; if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) { + u64 flags; + access = (_PAGE_PRESENT | _PAGE_USER); access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL; + local_irq_save(flags); if (hash_page(ea, access, 0x300) != 0) error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; + local_irq_restore(flags); } if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) { if ((ret = spu_handle_mm_fault(spu)) != 0) From 6fb8f3acbe833586eb32598d1f844eb9f77c4fba Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 29 Apr 2006 02:40:22 +0200 Subject: [PATCH 160/160] [PATCH] powerpc: update cell_defconfig reflect the changes to Kconfig since the last update. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/configs/cell_defconfig | 40 ++++++++++++++++++----------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index fe22e54ab2b0..dbe421dc3c11 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -55,6 +56,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -69,10 +71,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -84,7 +82,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -93,6 +90,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -126,6 +124,7 @@ CONFIG_RTAS_FLASH=y CONFIG_MMIO_NVRAM=y CONFIG_CELL_IIC=y # CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -167,7 +166,6 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y @@ -184,7 +182,6 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -226,6 +223,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -242,6 +240,7 @@ CONFIG_IPV6=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -632,6 +631,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -717,7 +717,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -736,9 +735,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -765,10 +762,6 @@ CONFIG_I2C_ALGOBIT=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -817,6 +810,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # @@ -833,6 +839,11 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -889,7 +900,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set #