renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-17 01:34:00 +08:00
Code

sfc: Make board information explicitly Falcon-specific

Browse Source 
Rename struct efx_board to struct falcon_board.

Introduce and use inline function to look up board info from struct
efx_nic, in preparation for moving it.

Move board init and fini calls into NIC probe and remove functions.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Ben Hutchings 2009-11-23 16:05:12 +00:00 committed by David S. Miller
parent 981fc1b4b8
commit 278c0621fb
8 changed files with 88 additions and 75 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
drivers/net/sfc/efx.c
View File

@ -1265,7 +1265,7 @@ static void efx_monitor(struct work_struct *data)
goto out_requeue;
if (!efx->port_enabled)
goto out_unlock;
rc = efx->board_info.monitor(efx);
rc = falcon_board(efx)->monitor(efx);
if (rc) {
EFX_ERR(efx, "Board sensor %s; shutting down PHY\n",
(rc == -ERANGE) ? "reported fault" : "failed");
@ -1908,7 +1908,7 @@ static struct efx_phy_operations efx_dummy_phy_operations = {
.clear_interrupt = efx_port_dummy_op_void,
};
static struct efx_board efx_dummy_board_info = {
static struct falcon_board efx_dummy_board_info = {
.init = efx_port_dummy_op_int,
.init_phy = efx_port_dummy_op_void,
.set_id_led = efx_port_dummy_op_set_id_led,
@ -2026,10 +2026,6 @@ static void efx_pci_remove_main(struct efx_nic *efx)
falcon_fini_interrupt(efx);
efx_fini_channels(efx);
efx_fini_port(efx);
/* Shutdown the board, then the NIC and board state */
efx->board_info.fini(efx);
efx_fini_napi(efx);
efx_remove_all(efx);
}
@ -2089,39 +2085,30 @@ static int efx_pci_probe_main(struct efx_nic *efx)
if (rc)
goto fail2;
/* Initialise the board */
rc = efx->board_info.init(efx);
if (rc) {
EFX_ERR(efx, "failed to initialise board\n");
goto fail3;
}
rc = falcon_init_nic(efx);
if (rc) {
EFX_ERR(efx, "failed to initialise NIC\n");
goto fail4;
goto fail3;
}
rc = efx_init_port(efx);
if (rc) {
EFX_ERR(efx, "failed to initialise port\n");
goto fail5;
goto fail4;
}
efx_init_channels(efx);
rc = falcon_init_interrupt(efx);
if (rc)
goto fail6;
goto fail5;
return 0;
fail6:
fail5:
efx_fini_channels(efx);
efx_fini_port(efx);
fail5:
fail4:
efx->board_info.fini(efx);
fail3:
efx_fini_napi(efx);
fail2:

6
drivers/net/sfc/ethtool.c
View File

@ -188,14 +188,14 @@ static int efx_ethtool_phys_id(struct net_device *net_dev, u32 count)
struct efx_nic *efx = netdev_priv(net_dev);
do {
efx->board_info.set_id_led(efx, EFX_LED_ON);
falcon_board(efx)->set_id_led(efx, EFX_LED_ON);
schedule_timeout_interruptible(HZ / 2);
efx->board_info.set_id_led(efx, EFX_LED_OFF);
falcon_board(efx)->set_id_led(efx, EFX_LED_OFF);
schedule_timeout_interruptible(HZ / 2);
} while (!signal_pending(current) && --count != 0);
efx->board_info.set_id_led(efx, EFX_LED_DEFAULT);
falcon_board(efx)->set_id_led(efx, EFX_LED_DEFAULT);
return 0;
}

11
drivers/net/sfc/falcon.c
View File

@ -2877,8 +2877,17 @@ int falcon_probe_nic(struct efx_nic *efx)
if (rc)
goto fail5;
rc = falcon_board(efx)->init(efx);
if (rc) {
EFX_ERR(efx, "failed to initialise board\n");
goto fail6;
}
return 0;
fail6:
BUG_ON(i2c_del_adapter(&efx->i2c_adap));
memset(&efx->i2c_adap, 0, sizeof(efx->i2c_adap));
fail5:
falcon_remove_spi_devices(efx);
falcon_free_buffer(efx, &efx->irq_status);
@ -3070,6 +3079,8 @@ void falcon_remove_nic(struct efx_nic *efx)
struct falcon_nic_data *nic_data = efx->nic_data;
int rc;
falcon_board(efx)->fini(efx);
/* Remove I2C adapter and clear it in preparation for a retry */
rc = i2c_del_adapter(&efx->i2c_adap);
BUG_ON(rc);

5
drivers/net/sfc/falcon.h
View File

@ -29,6 +29,11 @@ static inline int falcon_rev(struct efx_nic *efx)
return efx->pci_dev->revision;
}
static inline struct falcon_board *falcon_board(struct efx_nic *efx)
{
return &efx->board_info;
}
extern struct efx_nic_type falcon_a_nic_type;
extern struct efx_nic_type falcon_b_nic_type;

106
drivers/net/sfc/falcon_boards.c
View File

@ -65,7 +65,7 @@ static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
goto err;
}
efx->board_info.hwmon_client = client;
falcon_board(efx)->hwmon_client = client;
return 0;
err:
@ -75,12 +75,12 @@ err:
static void efx_fini_lm87(struct efx_nic *efx)
{
i2c_unregister_device(efx->board_info.hwmon_client);
i2c_unregister_device(falcon_board(efx)->hwmon_client);
}
static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
{
struct i2c_client *client = efx->board_info.hwmon_client;
struct i2c_client *client = falcon_board(efx)->hwmon_client;
s32 alarms1, alarms2;
/* If link is up then do not monitor temperature */
@ -189,8 +189,8 @@ static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
static void sfe4001_poweroff(struct efx_nic *efx)
{
struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
struct i2c_client *ioexp_client = falcon_board(efx)->ioexp_client;
struct i2c_client *hwmon_client = falcon_board(efx)->hwmon_client;
/* Turn off all power rails and disable outputs */
i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff);
@ -203,8 +203,8 @@ static void sfe4001_poweroff(struct efx_nic *efx)
static int sfe4001_poweron(struct efx_nic *efx)
{
struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
struct i2c_client *ioexp_client = falcon_board(efx)->ioexp_client;
struct i2c_client *hwmon_client = falcon_board(efx)->hwmon_client;
unsigned int i, j;
int rc;
u8 out;
@ -346,7 +346,7 @@ static ssize_t set_phy_flash_cfg(struct device *dev,
efx->phy_mode = new_mode;
if (new_mode & PHY_MODE_SPECIAL)
efx_stats_disable(efx);
if (efx->board_info.type == FALCON_BOARD_SFE4001)
if (falcon_board(efx)->type == FALCON_BOARD_SFE4001)
err = sfe4001_poweron(efx);
else
err = sfn4111t_reset(efx);
@ -363,12 +363,14 @@ static DEVICE_ATTR(phy_flash_cfg, 0644, show_phy_flash_cfg, set_phy_flash_cfg);
static void sfe4001_fini(struct efx_nic *efx)
{
struct falcon_board *board = falcon_board(efx);
EFX_INFO(efx, "%s\n", __func__);
device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
sfe4001_poweroff(efx);
i2c_unregister_device(efx->board_info.ioexp_client);
i2c_unregister_device(efx->board_info.hwmon_client);
i2c_unregister_device(board->ioexp_client);
i2c_unregister_device(board->hwmon_client);
}
static int sfe4001_check_hw(struct efx_nic *efx)
@ -387,7 +389,7 @@ static int sfe4001_check_hw(struct efx_nic *efx)
* the power undesirably.
* We know we can read from the IO expander because we did
* it during power-on. Assume failure now is bad news. */
status = i2c_smbus_read_byte_data(efx->board_info.ioexp_client, P1_IN);
status = i2c_smbus_read_byte_data(falcon_board(efx)->ioexp_client, P1_IN);
if (status >= 0 &&
(status & ((1 << P1_AFE_PWD_LBN) | (1 << P1_DSP_PWD25_LBN))) != 0)
return 0;
@ -409,36 +411,37 @@ static struct i2c_board_info sfe4001_hwmon_info = {
*/
static int sfe4001_init(struct efx_nic *efx)
{
struct falcon_board *board = falcon_board(efx);
int rc;
#if defined(CONFIG_SENSORS_LM90) || defined(CONFIG_SENSORS_LM90_MODULE)
efx->board_info.hwmon_client =
board->hwmon_client =
i2c_new_device(&efx->i2c_adap, &sfe4001_hwmon_info);
#else
efx->board_info.hwmon_client =
board->hwmon_client =
i2c_new_dummy(&efx->i2c_adap, sfe4001_hwmon_info.addr);
#endif
if (!efx->board_info.hwmon_client)
if (!board->hwmon_client)
return -EIO;
/* Raise board/PHY high limit from 85 to 90 degrees Celsius */
rc = i2c_smbus_write_byte_data(efx->board_info.hwmon_client,
rc = i2c_smbus_write_byte_data(board->hwmon_client,
MAX664X_REG_WLHO, 90);
if (rc)
goto fail_hwmon;
efx->board_info.ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
if (!efx->board_info.ioexp_client) {
board->ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
if (!board->ioexp_client) {
rc = -EIO;
goto fail_hwmon;
}
/* 10Xpress has fixed-function LED pins, so there is no board-specific
* blink code. */
efx->board_info.set_id_led = tenxpress_set_id_led;
board->set_id_led = tenxpress_set_id_led;
efx->board_info.monitor = sfe4001_check_hw;
efx->board_info.fini = sfe4001_fini;
board->monitor = sfe4001_check_hw;
board->fini = sfe4001_fini;
if (efx->phy_mode & PHY_MODE_SPECIAL) {
/* PHY won't generate a 156.25 MHz clock and MAC stats fetch
@ -459,9 +462,9 @@ static int sfe4001_init(struct efx_nic *efx)
fail_on:
sfe4001_poweroff(efx);
fail_ioexp:
i2c_unregister_device(efx->board_info.ioexp_client);
i2c_unregister_device(board->ioexp_client);
fail_hwmon:
i2c_unregister_device(efx->board_info.hwmon_client);
i2c_unregister_device(board->hwmon_client);
return rc;
}
@ -474,7 +477,7 @@ static int sfn4111t_check_hw(struct efx_nic *efx)
return 0;
/* Test LHIGH, RHIGH, FAULT, EOT and IOT alarms */
status = i2c_smbus_read_byte_data(efx->board_info.hwmon_client,
status = i2c_smbus_read_byte_data(falcon_board(efx)->hwmon_client,
MAX664X_REG_RSL);
if (status < 0)
return -EIO;
@ -488,7 +491,7 @@ static void sfn4111t_fini(struct efx_nic *efx)
EFX_INFO(efx, "%s\n", __func__);
device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
i2c_unregister_device(efx->board_info.hwmon_client);
i2c_unregister_device(falcon_board(efx)->hwmon_client);
}
static struct i2c_board_info sfn4111t_a0_hwmon_info = {
@ -515,20 +518,21 @@ static void sfn4111t_init_phy(struct efx_nic *efx)
static int sfn4111t_init(struct efx_nic *efx)
{
struct falcon_board *board = falcon_board(efx);
int rc;
efx->board_info.hwmon_client =
board->hwmon_client =
i2c_new_device(&efx->i2c_adap,
(efx->board_info.minor < 5) ?
(board->minor < 5) ?
&sfn4111t_a0_hwmon_info :
&sfn4111t_r5_hwmon_info);
if (!efx->board_info.hwmon_client)
if (!board->hwmon_client)
return -EIO;
efx->board_info.init_phy = sfn4111t_init_phy;
efx->board_info.set_id_led = tenxpress_set_id_led;
efx->board_info.monitor = sfn4111t_check_hw;
efx->board_info.fini = sfn4111t_fini;
board->init_phy = sfn4111t_init_phy;
board->set_id_led = tenxpress_set_id_led;
board->monitor = sfn4111t_check_hw;
board->fini = sfn4111t_fini;
rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
if (rc)
@ -542,7 +546,7 @@ static int sfn4111t_init(struct efx_nic *efx)
return 0;
fail_hwmon:
i2c_unregister_device(efx->board_info.hwmon_client);
i2c_unregister_device(board->hwmon_client);
return rc;
}
@ -601,10 +605,12 @@ static void sfe4002_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
static int sfe4002_check_hw(struct efx_nic *efx)
{
struct falcon_board *board = falcon_board(efx);
/* A0 board rev. 4002s report a temperature fault the whole time
* (bad sensor) so we mask it out. */
unsigned alarm_mask =
(efx->board_info.major == 0 && efx->board_info.minor == 0) ?
(board->major == 0 && board->minor == 0) ?
~LM87_ALARM_TEMP_EXT1 : ~0;
return efx_check_lm87(efx, alarm_mask);
@ -612,13 +618,14 @@ static int sfe4002_check_hw(struct efx_nic *efx)
static int sfe4002_init(struct efx_nic *efx)
{
struct falcon_board *board = falcon_board(efx);
int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
if (rc)
return rc;
efx->board_info.monitor = sfe4002_check_hw;
efx->board_info.init_phy = sfe4002_init_phy;
efx->board_info.set_id_led = sfe4002_set_id_led;
efx->board_info.fini = efx_fini_lm87;
board->monitor = sfe4002_check_hw;
board->init_phy = sfe4002_init_phy;
board->set_id_led = sfe4002_set_id_led;
board->fini = efx_fini_lm87;
return 0;
}
@ -683,13 +690,15 @@ static int sfn4112f_check_hw(struct efx_nic *efx)
static int sfn4112f_init(struct efx_nic *efx)
{
struct falcon_board *board = falcon_board(efx);
int rc = efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
if (rc)
return rc;
efx->board_info.monitor = sfn4112f_check_hw;
efx->board_info.init_phy = sfn4112f_init_phy;
efx->board_info.set_id_led = sfn4112f_set_id_led;
efx->board_info.fini = efx_fini_lm87;
board->monitor = sfn4112f_check_hw;
board->init_phy = sfn4112f_init_phy;
board->set_id_led = sfn4112f_set_id_led;
board->fini = efx_fini_lm87;
return 0;
}
@ -714,24 +723,25 @@ static struct falcon_board_data board_data[] = {
void falcon_probe_board(struct efx_nic *efx, u16 revision_info)
{
struct falcon_board *board = falcon_board(efx);
struct falcon_board_data *data = NULL;
int i;
efx->board_info.type = FALCON_BOARD_TYPE(revision_info);
efx->board_info.major = FALCON_BOARD_MAJOR(revision_info);
efx->board_info.minor = FALCON_BOARD_MINOR(revision_info);
board->type = FALCON_BOARD_TYPE(revision_info);
board->major = FALCON_BOARD_MAJOR(revision_info);
board->minor = FALCON_BOARD_MINOR(revision_info);
for (i = 0; i < ARRAY_SIZE(board_data); i++)
if (board_data[i].type == efx->board_info.type)
if (board_data[i].type == board->type)
data = &board_data[i];
if (data) {
EFX_INFO(efx, "board is %s rev %c%d\n",
(efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
? data->ref_model : data->gen_type,
'A' + efx->board_info.major, efx->board_info.minor);
efx->board_info.init = data->init;
'A' + board->major, board->minor);
board->init = data->init;
} else {
EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type);
EFX_ERR(efx, "unknown board type %d\n", board->type);
}
}

6
drivers/net/sfc/net_driver.h
View File

@ -395,7 +395,7 @@ enum efx_led_mode {
};
/**
* struct efx_board - board information
* struct falcon_board - board information
* @type: Board model type
* @major: Major rev. ('A', 'B' ...)
* @minor: Minor rev. (0, 1, ...)
@ -407,7 +407,7 @@ enum efx_led_mode {
* @hwmon_client: I2C client for hardware monitor
* @ioexp_client: I2C client for power/port control
*/
struct efx_board {
struct falcon_board {
int type;
int major;
int minor;
@ -752,7 +752,7 @@ struct efx_nic {
unsigned int irq_rx_moderation;
struct i2c_adapter i2c_adap;
struct efx_board board_info;
struct falcon_board board_info;
enum nic_state state;
enum reset_type reset_pending;

2
drivers/net/sfc/qt202x_phy.c
View File

@ -126,7 +126,7 @@ static int qt202x_reset_phy(struct efx_nic *efx)
if (rc < 0)
goto fail;
efx->board_info.init_phy(efx);
falcon_board(efx)->init_phy(efx);
return rc;

2
drivers/net/sfc/tenxpress.c
View File

@ -303,7 +303,7 @@ static int tenxpress_phy_init(struct efx_nic *efx)
u16 old_adv, adv;
int rc = 0;
efx->board_info.init_phy(efx);
falcon_board(efx)->init_phy(efx);
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
if (!phy_data)