mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 05:34:00 +08:00
[media] saa7164: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
parent
395eff951a
commit
24f711c135
@ -218,8 +218,7 @@ int saa7164_buffer_activate(struct saa7164_buffer *buf, int i)
|
||||
saa7164_writel(port->bufptr32h + ((sizeof(u32) * 2) * i), buf->pt_dma);
|
||||
saa7164_writel(port->bufptr32l + ((sizeof(u32) * 2) * i), 0);
|
||||
|
||||
dprintk(DBGLVL_BUF, " buf[%d] offset 0x%llx (0x%x) "
|
||||
"buf 0x%llx/%llx (0x%x/%x) nr=%d\n",
|
||||
dprintk(DBGLVL_BUF, " buf[%d] offset 0x%llx (0x%x) buf 0x%llx/%llx (0x%x/%x) nr=%d\n",
|
||||
buf->idx,
|
||||
(u64)port->bufoffset + (i * sizeof(u32)),
|
||||
saa7164_readl(port->bufoffset + (sizeof(u32) * i)),
|
||||
|
@ -427,8 +427,8 @@ int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg,
|
||||
write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp;
|
||||
|
||||
if (bytes_to_read > write_distance) {
|
||||
printk(KERN_ERR "%s() Invalid bus state, missing msg "
|
||||
"or mangled ring, faulty H/W / bad code?\n", __func__);
|
||||
printk(KERN_ERR "%s() Invalid bus state, missing msg or mangled ring, faulty H/W / bad code?\n",
|
||||
__func__);
|
||||
ret = SAA_ERR_INVALID_COMMAND;
|
||||
goto out;
|
||||
}
|
||||
|
@ -726,8 +726,8 @@ void saa7164_card_list(struct saa7164_dev *dev)
|
||||
dev->name, dev->name, dev->name, dev->name);
|
||||
}
|
||||
|
||||
printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod "
|
||||
"option:\n", dev->name);
|
||||
printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod option:\n",
|
||||
dev->name);
|
||||
|
||||
for (i = 0; i < saa7164_bcount; i++)
|
||||
printk(KERN_ERR "%s: card=%d -> %s\n",
|
||||
|
@ -301,8 +301,8 @@ static int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
|
||||
else
|
||||
saa7164_cmd_timeout_seqno(dev, seqno);
|
||||
|
||||
dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d "
|
||||
"(signalled=%d)\n", __func__, seqno, r,
|
||||
dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d (signalled=%d)\n",
|
||||
__func__, seqno, r,
|
||||
dev->cmds[seqno].signalled);
|
||||
} else
|
||||
ret = SAA_OK;
|
||||
@ -353,8 +353,8 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command,
|
||||
int ret;
|
||||
int safety = 0;
|
||||
|
||||
dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, "
|
||||
"sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id,
|
||||
dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, sel = 0x%x)\n",
|
||||
__func__, saa7164_unitid_name(dev, id), id,
|
||||
command, controlselector);
|
||||
|
||||
if ((size == 0) || (buf == NULL)) {
|
||||
@ -452,9 +452,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command,
|
||||
if (presponse_t->seqno != pcommand_t->seqno) {
|
||||
|
||||
dprintk(DBGLVL_CMD,
|
||||
"wrong event: seqno = %d, "
|
||||
"expected seqno = %d, "
|
||||
"will dequeue regardless\n",
|
||||
"wrong event: seqno = %d, expected seqno = %d, will dequeue regardless\n",
|
||||
presponse_t->seqno, pcommand_t->seqno);
|
||||
|
||||
ret = saa7164_cmd_dequeue(dev);
|
||||
|
@ -710,9 +710,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
|
||||
} else {
|
||||
/* Find the function */
|
||||
dprintk(DBGLVL_IRQ,
|
||||
"%s() unhandled interrupt "
|
||||
"reg 0x%x bit 0x%x "
|
||||
"intid = 0x%x\n",
|
||||
"%s() unhandled interrupt reg 0x%x bit 0x%x intid = 0x%x\n",
|
||||
__func__, i, bit, intid);
|
||||
}
|
||||
}
|
||||
@ -767,13 +765,11 @@ void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr)
|
||||
{
|
||||
int i;
|
||||
|
||||
dprintk(1, "--------------------> "
|
||||
"00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
|
||||
dprintk(1, "--------------------> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
|
||||
|
||||
for (i = 0; i < 0x100; i += 16)
|
||||
dprintk(1, "region0[0x%08x] = "
|
||||
"%02x %02x %02x %02x %02x %02x %02x %02x"
|
||||
" %02x %02x %02x %02x %02x %02x %02x %02x\n", i,
|
||||
dprintk(1, "region0[0x%08x] = %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
|
||||
i,
|
||||
(u8)saa7164_readb(addr + i + 0),
|
||||
(u8)saa7164_readb(addr + i + 1),
|
||||
(u8)saa7164_readb(addr + i + 2),
|
||||
@ -825,8 +821,7 @@ static void saa7164_dump_hwdesc(struct saa7164_dev *dev)
|
||||
|
||||
static void saa7164_dump_intfdesc(struct saa7164_dev *dev)
|
||||
{
|
||||
dprintk(1, "@0x%p intfdesc "
|
||||
"sizeof(struct tmComResInterfaceDescr) = %d bytes\n",
|
||||
dprintk(1, "@0x%p intfdesc sizeof(struct tmComResInterfaceDescr) = %d bytes\n",
|
||||
&dev->intfdesc, (u32)sizeof(struct tmComResInterfaceDescr));
|
||||
|
||||
dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength);
|
||||
@ -1011,8 +1006,7 @@ static int saa7164_dev_setup(struct saa7164_dev *dev)
|
||||
saa7164_port_init(dev, SAA7164_PORT_VBI2);
|
||||
|
||||
if (get_resources(dev) < 0) {
|
||||
printk(KERN_ERR "CORE %s No more PCIe resources for "
|
||||
"subsystem: %04x:%04x\n",
|
||||
printk(KERN_ERR "CORE %s No more PCIe resources for subsystem: %04x:%04x\n",
|
||||
dev->name, dev->pci->subsystem_vendor,
|
||||
dev->pci->subsystem_device);
|
||||
|
||||
@ -1204,8 +1198,8 @@ static bool saa7164_enable_msi(struct pci_dev *pci_dev, struct saa7164_dev *dev)
|
||||
err = pci_enable_msi(pci_dev);
|
||||
|
||||
if (err) {
|
||||
printk(KERN_ERR "%s() Failed to enable MSI interrupt."
|
||||
" Falling back to a shared IRQ\n", __func__);
|
||||
printk(KERN_ERR "%s() Failed to enable MSI interrupt. Falling back to a shared IRQ\n",
|
||||
__func__);
|
||||
return false;
|
||||
}
|
||||
|
||||
@ -1215,8 +1209,8 @@ static bool saa7164_enable_msi(struct pci_dev *pci_dev, struct saa7164_dev *dev)
|
||||
|
||||
if (err) {
|
||||
/* fall back to legacy interrupt */
|
||||
printk(KERN_ERR "%s() Failed to get an MSI interrupt."
|
||||
" Falling back to a shared IRQ\n", __func__);
|
||||
printk(KERN_ERR "%s() Failed to get an MSI interrupt. Falling back to a shared IRQ\n",
|
||||
__func__);
|
||||
pci_disable_msi(pci_dev);
|
||||
return false;
|
||||
}
|
||||
@ -1256,8 +1250,8 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
|
||||
/* print pci info */
|
||||
dev->pci_rev = pci_dev->revision;
|
||||
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
|
||||
printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
|
||||
"latency: %d, mmio: 0x%llx\n", dev->name,
|
||||
printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
|
||||
dev->name,
|
||||
pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
|
||||
dev->pci_lat,
|
||||
(unsigned long long)pci_resource_start(pci_dev, 0));
|
||||
@ -1307,8 +1301,7 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
|
||||
err = saa7164_downloadfirmware(dev);
|
||||
if (err < 0) {
|
||||
printk(KERN_ERR
|
||||
"Failed to boot firmware, no features "
|
||||
"registered\n");
|
||||
"Failed to boot firmware, no features registered\n");
|
||||
goto fail_fw;
|
||||
}
|
||||
|
||||
@ -1327,8 +1320,7 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
|
||||
*/
|
||||
version = 0;
|
||||
if (saa7164_api_get_fw_version(dev, &version) == SAA_OK)
|
||||
dprintk(1, "Bus is operating correctly using "
|
||||
"version %d.%d.%d.%d (0x%x)\n",
|
||||
dprintk(1, "Bus is operating correctly using version %d.%d.%d.%d (0x%x)\n",
|
||||
(version & 0x0000fc00) >> 10,
|
||||
(version & 0x000003e0) >> 5,
|
||||
(version & 0x0000001f),
|
||||
@ -1356,45 +1348,43 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
|
||||
/* Begin to create the video sub-systems and register funcs */
|
||||
if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) {
|
||||
if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS1]) < 0) {
|
||||
printk(KERN_ERR "%s() Failed to register "
|
||||
"dvb adapters on porta\n",
|
||||
printk(KERN_ERR "%s() Failed to register dvb adapters on porta\n",
|
||||
__func__);
|
||||
}
|
||||
}
|
||||
|
||||
if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) {
|
||||
if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS2]) < 0) {
|
||||
printk(KERN_ERR"%s() Failed to register "
|
||||
"dvb adapters on portb\n",
|
||||
printk(KERN_ERR"%s() Failed to register dvb adapters on portb\n",
|
||||
__func__);
|
||||
}
|
||||
}
|
||||
|
||||
if (saa7164_boards[dev->board].portc == SAA7164_MPEG_ENCODER) {
|
||||
if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC1]) < 0) {
|
||||
printk(KERN_ERR"%s() Failed to register "
|
||||
"mpeg encoder\n", __func__);
|
||||
printk(KERN_ERR"%s() Failed to register mpeg encoder\n",
|
||||
__func__);
|
||||
}
|
||||
}
|
||||
|
||||
if (saa7164_boards[dev->board].portd == SAA7164_MPEG_ENCODER) {
|
||||
if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC2]) < 0) {
|
||||
printk(KERN_ERR"%s() Failed to register "
|
||||
"mpeg encoder\n", __func__);
|
||||
printk(KERN_ERR"%s() Failed to register mpeg encoder\n",
|
||||
__func__);
|
||||
}
|
||||
}
|
||||
|
||||
if (saa7164_boards[dev->board].porte == SAA7164_MPEG_VBI) {
|
||||
if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI1]) < 0) {
|
||||
printk(KERN_ERR"%s() Failed to register "
|
||||
"vbi device\n", __func__);
|
||||
printk(KERN_ERR"%s() Failed to register vbi device\n",
|
||||
__func__);
|
||||
}
|
||||
}
|
||||
|
||||
if (saa7164_boards[dev->board].portf == SAA7164_MPEG_VBI) {
|
||||
if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI2]) < 0) {
|
||||
printk(KERN_ERR"%s() Failed to register "
|
||||
"vbi device\n", __func__);
|
||||
printk(KERN_ERR"%s() Failed to register vbi device\n",
|
||||
__func__);
|
||||
}
|
||||
}
|
||||
saa7164_api_set_debug(dev, fw_debug);
|
||||
@ -1404,15 +1394,15 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
|
||||
"saa7164 debug");
|
||||
if (IS_ERR(dev->kthread)) {
|
||||
dev->kthread = NULL;
|
||||
printk(KERN_ERR "%s() Failed to create "
|
||||
"debug kernel thread\n", __func__);
|
||||
printk(KERN_ERR "%s() Failed to create debug kernel thread\n",
|
||||
__func__);
|
||||
}
|
||||
}
|
||||
|
||||
} /* != BOARD_UNKNOWN */
|
||||
else
|
||||
printk(KERN_ERR "%s() Unsupported board detected, "
|
||||
"registering without firmware\n", __func__);
|
||||
printk(KERN_ERR "%s() Unsupported board detected, registering without firmware\n",
|
||||
__func__);
|
||||
|
||||
dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug);
|
||||
dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs);
|
||||
|
@ -244,8 +244,8 @@ static int saa7164_dvb_start_port(struct saa7164_port *port)
|
||||
/* Stop the hardware, regardless */
|
||||
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
|
||||
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
|
||||
printk(KERN_ERR "%s() acquire/forced stop transition "
|
||||
"failed, res = 0x%x\n", __func__, result);
|
||||
printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n",
|
||||
__func__, result);
|
||||
}
|
||||
ret = -EIO;
|
||||
goto out;
|
||||
@ -261,8 +261,8 @@ static int saa7164_dvb_start_port(struct saa7164_port *port)
|
||||
/* Stop the hardware, regardless */
|
||||
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
|
||||
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
|
||||
printk(KERN_ERR "%s() pause/forced stop transition "
|
||||
"failed, res = 0x%x\n", __func__, result);
|
||||
printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
|
||||
__func__, result);
|
||||
}
|
||||
|
||||
ret = -EIO;
|
||||
@ -279,8 +279,8 @@ static int saa7164_dvb_start_port(struct saa7164_port *port)
|
||||
/* Stop the hardware, regardless */
|
||||
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
|
||||
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
|
||||
printk(KERN_ERR "%s() run/forced stop transition "
|
||||
"failed, res = 0x%x\n", __func__, result);
|
||||
printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
|
||||
__func__, result);
|
||||
}
|
||||
|
||||
ret = -EIO;
|
||||
@ -357,8 +357,7 @@ static int dvb_register(struct saa7164_port *port)
|
||||
/* Sanity check that the PCI configuration space is active */
|
||||
if (port->hwcfg.BARLocation == 0) {
|
||||
result = -ENOMEM;
|
||||
printk(KERN_ERR "%s: dvb_register_adapter failed "
|
||||
"(errno = %d), NO PCI configuration\n",
|
||||
printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), NO PCI configuration\n",
|
||||
DRIVER_NAME, result);
|
||||
goto fail_adapter;
|
||||
}
|
||||
@ -386,8 +385,7 @@ static int dvb_register(struct saa7164_port *port)
|
||||
|
||||
if (!buf) {
|
||||
result = -ENOMEM;
|
||||
printk(KERN_ERR "%s: dvb_register_adapter failed "
|
||||
"(errno = %d), unable to allocate buffers\n",
|
||||
printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), unable to allocate buffers\n",
|
||||
DRIVER_NAME, result);
|
||||
goto fail_adapter;
|
||||
}
|
||||
@ -401,8 +399,8 @@ static int dvb_register(struct saa7164_port *port)
|
||||
result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE,
|
||||
&dev->pci->dev, adapter_nr);
|
||||
if (result < 0) {
|
||||
printk(KERN_ERR "%s: dvb_register_adapter failed "
|
||||
"(errno = %d)\n", DRIVER_NAME, result);
|
||||
printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d)\n",
|
||||
DRIVER_NAME, result);
|
||||
goto fail_adapter;
|
||||
}
|
||||
dvb->adapter.priv = port;
|
||||
@ -410,8 +408,8 @@ static int dvb_register(struct saa7164_port *port)
|
||||
/* register frontend */
|
||||
result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
|
||||
if (result < 0) {
|
||||
printk(KERN_ERR "%s: dvb_register_frontend failed "
|
||||
"(errno = %d)\n", DRIVER_NAME, result);
|
||||
printk(KERN_ERR "%s: dvb_register_frontend failed (errno = %d)\n",
|
||||
DRIVER_NAME, result);
|
||||
goto fail_frontend;
|
||||
}
|
||||
|
||||
@ -444,16 +442,16 @@ static int dvb_register(struct saa7164_port *port)
|
||||
dvb->fe_hw.source = DMX_FRONTEND_0;
|
||||
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
|
||||
if (result < 0) {
|
||||
printk(KERN_ERR "%s: add_frontend failed "
|
||||
"(DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result);
|
||||
printk(KERN_ERR "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
|
||||
DRIVER_NAME, result);
|
||||
goto fail_fe_hw;
|
||||
}
|
||||
|
||||
dvb->fe_mem.source = DMX_MEMORY_FE;
|
||||
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
|
||||
if (result < 0) {
|
||||
printk(KERN_ERR "%s: add_frontend failed "
|
||||
"(DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result);
|
||||
printk(KERN_ERR "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
|
||||
DRIVER_NAME, result);
|
||||
goto fail_fe_mem;
|
||||
}
|
||||
|
||||
|
@ -157,8 +157,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port)
|
||||
params->pitch);
|
||||
|
||||
if (!buf) {
|
||||
printk(KERN_ERR "%s() failed "
|
||||
"(errno = %d), unable to allocate buffer\n",
|
||||
printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n",
|
||||
__func__, result);
|
||||
result = -ENOMEM;
|
||||
goto failed;
|
||||
@ -681,8 +680,8 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port)
|
||||
/* Stop the hardware, regardless */
|
||||
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
|
||||
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
|
||||
printk(KERN_ERR "%s() acquire/forced stop transition "
|
||||
"failed, res = 0x%x\n", __func__, result);
|
||||
printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n",
|
||||
__func__, result);
|
||||
}
|
||||
ret = -EIO;
|
||||
goto out;
|
||||
@ -698,8 +697,8 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port)
|
||||
/* Stop the hardware, regardless */
|
||||
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
|
||||
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
|
||||
printk(KERN_ERR "%s() pause/forced stop transition "
|
||||
"failed, res = 0x%x\n", __func__, result);
|
||||
printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
|
||||
__func__, result);
|
||||
}
|
||||
|
||||
ret = -EIO;
|
||||
@ -716,8 +715,8 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port)
|
||||
/* Stop the hardware, regardless */
|
||||
result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
|
||||
if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
|
||||
printk(KERN_ERR "%s() run/forced stop transition "
|
||||
"failed, res = 0x%x\n", __func__, result);
|
||||
printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
|
||||
__func__, result);
|
||||
}
|
||||
|
||||
ret = -EIO;
|
||||
@ -1026,8 +1025,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
|
||||
|
||||
/* Sanity check that the PCI configuration space is active */
|
||||
if (port->hwcfg.BARLocation == 0) {
|
||||
printk(KERN_ERR "%s() failed "
|
||||
"(errno = %d), NO PCI configuration\n",
|
||||
printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n",
|
||||
__func__, result);
|
||||
result = -ENOMEM;
|
||||
goto failed;
|
||||
|
@ -421,8 +421,8 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
|
||||
|
||||
ret = request_firmware(&fw, fwname, &dev->pci->dev);
|
||||
if (ret) {
|
||||
printk(KERN_ERR "%s() Upload failed. "
|
||||
"(file not found?)\n", __func__);
|
||||
printk(KERN_ERR "%s() Upload failed. (file not found?)\n",
|
||||
__func__);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
@ -478,15 +478,13 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
|
||||
0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK)
|
||||
== 0x00) && (version == 0x00)) {
|
||||
|
||||
dprintk(DBGLVL_FW, "BootLoader version in "
|
||||
"rom %d.%d.%d.%d\n",
|
||||
dprintk(DBGLVL_FW, "BootLoader version in rom %d.%d.%d.%d\n",
|
||||
(bootloaderversion & 0x0000fc00) >> 10,
|
||||
(bootloaderversion & 0x000003e0) >> 5,
|
||||
(bootloaderversion & 0x0000001f),
|
||||
(bootloaderversion & 0xffff0000) >> 16
|
||||
);
|
||||
dprintk(DBGLVL_FW, "BootLoader version "
|
||||
"in file %d.%d.%d.%d\n",
|
||||
dprintk(DBGLVL_FW, "BootLoader version in file %d.%d.%d.%d\n",
|
||||
(boothdr->version & 0x0000fc00) >> 10,
|
||||
(boothdr->version & 0x000003e0) >> 5,
|
||||
(boothdr->version & 0x0000001f),
|
||||
|
@ -110,8 +110,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port)
|
||||
params->pitch);
|
||||
|
||||
if (!buf) {
|
||||
printk(KERN_ERR "%s() failed "
|
||||
"(errno = %d), unable to allocate buffer\n",
|
||||
printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n",
|
||||
__func__, result);
|
||||
result = -ENOMEM;
|
||||
goto failed;
|
||||
@ -384,8 +383,8 @@ static int saa7164_vbi_start_streaming(struct saa7164_port *port)
|
||||
/* Stop the hardware, regardless */
|
||||
result = saa7164_vbi_stop_port(port);
|
||||
if (result != SAA_OK) {
|
||||
printk(KERN_ERR "%s() pause/forced stop transition "
|
||||
"failed, res = 0x%x\n", __func__, result);
|
||||
printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
|
||||
__func__, result);
|
||||
}
|
||||
|
||||
ret = -EIO;
|
||||
@ -403,8 +402,8 @@ static int saa7164_vbi_start_streaming(struct saa7164_port *port)
|
||||
result = saa7164_vbi_acquire_port(port);
|
||||
result = saa7164_vbi_stop_port(port);
|
||||
if (result != SAA_OK) {
|
||||
printk(KERN_ERR "%s() run/forced stop transition "
|
||||
"failed, res = 0x%x\n", __func__, result);
|
||||
printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
|
||||
__func__, result);
|
||||
}
|
||||
|
||||
ret = -EIO;
|
||||
@ -728,8 +727,7 @@ int saa7164_vbi_register(struct saa7164_port *port)
|
||||
|
||||
/* Sanity check that the PCI configuration space is active */
|
||||
if (port->hwcfg.BARLocation == 0) {
|
||||
printk(KERN_ERR "%s() failed "
|
||||
"(errno = %d), NO PCI configuration\n",
|
||||
printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n",
|
||||
__func__, result);
|
||||
result = -ENOMEM;
|
||||
goto failed;
|
||||
|
Loading…
Reference in New Issue
Block a user