mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
clk: qcom: Add support for banked MD RCGs
The banked MD RCGs in global clock control have a different register layout than the ones implemented in multimedia clock control. Add support for these types of clocks so we can change the rates of the UBI32 clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This commit is contained in:
Stephen Boyd
parent
ae3669ac5c
commit
229fd4a505
@ -68,16 +68,16 @@ static u8 clk_dyn_rcg_get_parent(struct clk_hw *hw)
|
||||
{
|
||||
struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw);
|
||||
int num_parents = __clk_get_num_parents(hw->clk);
|
||||
u32 ns, ctl;
|
||||
u32 ns, reg;
|
||||
int bank;
|
||||
int i;
|
||||
struct src_sel *s;
|
||||
|
||||
regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, &ctl);
|
||||
bank = reg_to_bank(rcg, ctl);
|
||||
regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®);
|
||||
bank = reg_to_bank(rcg, reg);
|
||||
s = &rcg->s[bank];
|
||||
|
||||
regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns);
|
||||
regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns);
|
||||
ns = ns_to_src(s, ns);
|
||||
|
||||
for (i = 0; i < num_parents; i++)
|
||||
@ -193,90 +193,93 @@ static u32 mn_to_reg(struct mn *mn, u32 m, u32 n, u32 val)
|
||||
|
||||
static void configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f)
|
||||
{
|
||||
u32 ns, md, ctl, *regp;
|
||||
u32 ns, md, reg;
|
||||
int bank, new_bank;
|
||||
struct mn *mn;
|
||||
struct pre_div *p;
|
||||
struct src_sel *s;
|
||||
bool enabled;
|
||||
u32 md_reg;
|
||||
u32 bank_reg;
|
||||
u32 md_reg, ns_reg;
|
||||
bool banked_mn = !!rcg->mn[1].width;
|
||||
bool banked_p = !!rcg->p[1].pre_div_width;
|
||||
struct clk_hw *hw = &rcg->clkr.hw;
|
||||
|
||||
enabled = __clk_is_enabled(hw->clk);
|
||||
|
||||
regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns);
|
||||
regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, &ctl);
|
||||
|
||||
if (banked_mn) {
|
||||
regp = &ctl;
|
||||
bank_reg = rcg->clkr.enable_reg;
|
||||
} else {
|
||||
regp = &ns;
|
||||
bank_reg = rcg->ns_reg;
|
||||
}
|
||||
|
||||
bank = reg_to_bank(rcg, *regp);
|
||||
regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®);
|
||||
bank = reg_to_bank(rcg, reg);
|
||||
new_bank = enabled ? !bank : bank;
|
||||
|
||||
ns_reg = rcg->ns_reg[new_bank];
|
||||
regmap_read(rcg->clkr.regmap, ns_reg, &ns);
|
||||
|
||||
if (banked_mn) {
|
||||
mn = &rcg->mn[new_bank];
|
||||
md_reg = rcg->md_reg[new_bank];
|
||||
|
||||
ns |= BIT(mn->mnctr_reset_bit);
|
||||
regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns);
|
||||
regmap_write(rcg->clkr.regmap, ns_reg, ns);
|
||||
|
||||
regmap_read(rcg->clkr.regmap, md_reg, &md);
|
||||
md = mn_to_md(mn, f->m, f->n, md);
|
||||
regmap_write(rcg->clkr.regmap, md_reg, md);
|
||||
|
||||
ns = mn_to_ns(mn, f->m, f->n, ns);
|
||||
regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns);
|
||||
regmap_write(rcg->clkr.regmap, ns_reg, ns);
|
||||
|
||||
ctl = mn_to_reg(mn, f->m, f->n, ctl);
|
||||
regmap_write(rcg->clkr.regmap, rcg->clkr.enable_reg, ctl);
|
||||
/* Two NS registers means mode control is in NS register */
|
||||
if (rcg->ns_reg[0] != rcg->ns_reg[1]) {
|
||||
ns = mn_to_reg(mn, f->m, f->n, ns);
|
||||
regmap_write(rcg->clkr.regmap, ns_reg, ns);
|
||||
} else {
|
||||
reg = mn_to_reg(mn, f->m, f->n, reg);
|
||||
regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg);
|
||||
}
|
||||
|
||||
ns &= ~BIT(mn->mnctr_reset_bit);
|
||||
regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns);
|
||||
} else {
|
||||
regmap_write(rcg->clkr.regmap, ns_reg, ns);
|
||||
}
|
||||
|
||||
if (banked_p) {
|
||||
p = &rcg->p[new_bank];
|
||||
ns = pre_div_to_ns(p, f->pre_div - 1, ns);
|
||||
}
|
||||
|
||||
s = &rcg->s[new_bank];
|
||||
ns = src_to_ns(s, s->parent_map[f->src], ns);
|
||||
regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns);
|
||||
regmap_write(rcg->clkr.regmap, ns_reg, ns);
|
||||
|
||||
if (enabled) {
|
||||
*regp ^= BIT(rcg->mux_sel_bit);
|
||||
regmap_write(rcg->clkr.regmap, bank_reg, *regp);
|
||||
regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®);
|
||||
reg ^= BIT(rcg->mux_sel_bit);
|
||||
regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg);
|
||||
}
|
||||
}
|
||||
|
||||
static int clk_dyn_rcg_set_parent(struct clk_hw *hw, u8 index)
|
||||
{
|
||||
struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw);
|
||||
u32 ns, ctl, md, reg;
|
||||
u32 ns, md, reg;
|
||||
int bank;
|
||||
struct freq_tbl f = { 0 };
|
||||
bool banked_mn = !!rcg->mn[1].width;
|
||||
bool banked_p = !!rcg->p[1].pre_div_width;
|
||||
|
||||
regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns);
|
||||
regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, &ctl);
|
||||
reg = banked_mn ? ctl : ns;
|
||||
|
||||
regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®);
|
||||
bank = reg_to_bank(rcg, reg);
|
||||
|
||||
regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns);
|
||||
|
||||
if (banked_mn) {
|
||||
regmap_read(rcg->clkr.regmap, rcg->md_reg[bank], &md);
|
||||
f.m = md_to_m(&rcg->mn[bank], md);
|
||||
f.n = ns_m_to_n(&rcg->mn[bank], ns, f.m);
|
||||
} else {
|
||||
f.pre_div = ns_to_pre_div(&rcg->p[bank], ns) + 1;
|
||||
}
|
||||
f.src = index;
|
||||
|
||||
if (banked_p)
|
||||
f.pre_div = ns_to_pre_div(&rcg->p[bank], ns) + 1;
|
||||
|
||||
f.src = index;
|
||||
configure_bank(rcg, &f);
|
||||
|
||||
return 0;
|
||||
@ -337,28 +340,30 @@ clk_dyn_rcg_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
|
||||
u32 m, n, pre_div, ns, md, mode, reg;
|
||||
int bank;
|
||||
struct mn *mn;
|
||||
bool banked_p = !!rcg->p[1].pre_div_width;
|
||||
bool banked_mn = !!rcg->mn[1].width;
|
||||
|
||||
regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns);
|
||||
|
||||
if (banked_mn)
|
||||
regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, ®);
|
||||
else
|
||||
reg = ns;
|
||||
|
||||
regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®);
|
||||
bank = reg_to_bank(rcg, reg);
|
||||
|
||||
regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns);
|
||||
m = n = pre_div = mode = 0;
|
||||
|
||||
if (banked_mn) {
|
||||
mn = &rcg->mn[bank];
|
||||
regmap_read(rcg->clkr.regmap, rcg->md_reg[bank], &md);
|
||||
m = md_to_m(mn, md);
|
||||
n = ns_m_to_n(mn, ns, m);
|
||||
/* Two NS registers means mode control is in NS register */
|
||||
if (rcg->ns_reg[0] != rcg->ns_reg[1])
|
||||
reg = ns;
|
||||
mode = reg_to_mnctr_mode(mn, reg);
|
||||
return calc_rate(parent_rate, m, n, mode, 0);
|
||||
} else {
|
||||
pre_div = ns_to_pre_div(&rcg->p[bank], ns);
|
||||
return calc_rate(parent_rate, 0, 0, 0, pre_div);
|
||||
}
|
||||
|
||||
if (banked_p)
|
||||
pre_div = ns_to_pre_div(&rcg->p[bank], ns);
|
||||
|
||||
return calc_rate(parent_rate, m, n, mode, pre_div);
|
||||
}
|
||||
|
||||
static long _freq_tbl_determine_rate(struct clk_hw *hw,
|
||||
|
||||
@ -103,8 +103,9 @@ extern const struct clk_ops clk_rcg_bypass_ops;
|
||||
* struct clk_dyn_rcg - root clock generator with glitch free mux
|
||||
*
|
||||
* @mux_sel_bit: bit to switch glitch free mux
|
||||
* @ns_reg: NS register
|
||||
* @ns_reg: NS0 and NS1 register
|
||||
* @md_reg: MD0 and MD1 register
|
||||
* @bank_reg: register to XOR @mux_sel_bit into to switch glitch free mux
|
||||
* @mn: mn counter (banked)
|
||||
* @s: source selector (banked)
|
||||
* @freq_tbl: frequency table
|
||||
@ -113,8 +114,9 @@ extern const struct clk_ops clk_rcg_bypass_ops;
|
||||
*
|
||||
*/
|
||||
struct clk_dyn_rcg {
|
||||
u32 ns_reg;
|
||||
u32 ns_reg[2];
|
||||
u32 md_reg[2];
|
||||
u32 bank_reg;
|
||||
|
||||
u8 mux_sel_bit;
|
||||
|
||||
|
||||
@ -773,9 +773,11 @@ static struct freq_tbl clk_tbl_gfx2d[] = {
|
||||
};
|
||||
|
||||
static struct clk_dyn_rcg gfx2d0_src = {
|
||||
.ns_reg = 0x0070,
|
||||
.ns_reg[0] = 0x0070,
|
||||
.ns_reg[1] = 0x0070,
|
||||
.md_reg[0] = 0x0064,
|
||||
.md_reg[1] = 0x0068,
|
||||
.bank_reg = 0x0060,
|
||||
.mn[0] = {
|
||||
.mnctr_en_bit = 8,
|
||||
.mnctr_reset_bit = 25,
|
||||
@ -831,9 +833,11 @@ static struct clk_branch gfx2d0_clk = {
|
||||
};
|
||||
|
||||
static struct clk_dyn_rcg gfx2d1_src = {
|
||||
.ns_reg = 0x007c,
|
||||
.ns_reg[0] = 0x007c,
|
||||
.ns_reg[1] = 0x007c,
|
||||
.md_reg[0] = 0x0078,
|
||||
.md_reg[1] = 0x006c,
|
||||
.bank_reg = 0x0074,
|
||||
.mn[0] = {
|
||||
.mnctr_en_bit = 8,
|
||||
.mnctr_reset_bit = 25,
|
||||
@ -930,9 +934,11 @@ static struct freq_tbl clk_tbl_gfx3d_8064[] = {
|
||||
};
|
||||
|
||||
static struct clk_dyn_rcg gfx3d_src = {
|
||||
.ns_reg = 0x008c,
|
||||
.ns_reg[0] = 0x008c,
|
||||
.ns_reg[1] = 0x008c,
|
||||
.md_reg[0] = 0x0084,
|
||||
.md_reg[1] = 0x0088,
|
||||
.bank_reg = 0x0080,
|
||||
.mn[0] = {
|
||||
.mnctr_en_bit = 8,
|
||||
.mnctr_reset_bit = 25,
|
||||
@ -1006,9 +1012,11 @@ static struct freq_tbl clk_tbl_vcap[] = {
|
||||
};
|
||||
|
||||
static struct clk_dyn_rcg vcap_src = {
|
||||
.ns_reg = 0x021c,
|
||||
.ns_reg[0] = 0x021c,
|
||||
.ns_reg[1] = 0x021c,
|
||||
.md_reg[0] = 0x01ec,
|
||||
.md_reg[1] = 0x0218,
|
||||
.bank_reg = 0x0178,
|
||||
.mn[0] = {
|
||||
.mnctr_en_bit = 8,
|
||||
.mnctr_reset_bit = 23,
|
||||
@ -1211,9 +1219,11 @@ static struct freq_tbl clk_tbl_mdp[] = {
|
||||
};
|
||||
|
||||
static struct clk_dyn_rcg mdp_src = {
|
||||
.ns_reg = 0x00d0,
|
||||
.ns_reg[0] = 0x00d0,
|
||||
.ns_reg[1] = 0x00d0,
|
||||
.md_reg[0] = 0x00c4,
|
||||
.md_reg[1] = 0x00c8,
|
||||
.bank_reg = 0x00c0,
|
||||
.mn[0] = {
|
||||
.mnctr_en_bit = 8,
|
||||
.mnctr_reset_bit = 31,
|
||||
@ -1318,7 +1328,9 @@ static struct freq_tbl clk_tbl_rot[] = {
|
||||
};
|
||||
|
||||
static struct clk_dyn_rcg rot_src = {
|
||||
.ns_reg = 0x00e8,
|
||||
.ns_reg[0] = 0x00e8,
|
||||
.ns_reg[1] = 0x00e8,
|
||||
.bank_reg = 0x00e8,
|
||||
.p[0] = {
|
||||
.pre_div_shift = 22,
|
||||
.pre_div_width = 4,
|
||||
@ -1542,9 +1554,11 @@ static struct freq_tbl clk_tbl_vcodec[] = {
|
||||
};
|
||||
|
||||
static struct clk_dyn_rcg vcodec_src = {
|
||||
.ns_reg = 0x0100,
|
||||
.ns_reg[0] = 0x0100,
|
||||
.ns_reg[1] = 0x0100,
|
||||
.md_reg[0] = 0x00fc,
|
||||
.md_reg[1] = 0x0128,
|
||||
.bank_reg = 0x00f8,
|
||||
.mn[0] = {
|
||||
.mnctr_en_bit = 5,
|
||||
.mnctr_reset_bit = 31,
|
||||
|
||||
Loading…
Reference in New Issue
Block a user