From e20119f7eaaaf6aad5b44f35155ce500429e17f6 Mon Sep 17 00:00:00 2001 From: Takeshi Kihara Date: Thu, 21 Feb 2019 13:59:38 +0100 Subject: [PATCH 01/39] arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels According to the R-Car Gen3 Hardware Manual Errata for Rev 1.50 of Feb 12, 2019, the DMA channels for SCIF5 are corrected from 16..47 to 0..15 on R-Car E3. Signed-off-by: Takeshi Kihara Fixes: a5ebe5e49a862e21 ("arm64: dts: renesas: r8a77990: Add SCIF-{0,1,3,4,5} device nodes") Signed-off-by: Geert Uytterhoeven Reviewed-by: Fabrizio Castro Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 786178cf1ffd..36f409091cfc 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for the R-Car E3 (R8A77990) SoC * - * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018-2019 Renesas Electronics Corp. */ #include @@ -1042,9 +1042,8 @@ <&cpg CPG_CORE R8A77990_CLK_S3D1C>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, - <&dmac2 0x5b>, <&dmac2 0x5a>; - dma-names = "tx", "rx", "tx", "rx"; + dmas = <&dmac0 0x5b>, <&dmac0 0x5a>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 202>; status = "disabled"; From c21cd4ae82e169b394139243684aaacf31bfcdf8 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 21 Feb 2019 15:04:28 +0100 Subject: [PATCH 02/39] arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels Correct the DMA channels for SCIF5 from 16..47 to 0..15, as was done for R-Car E3. Signed-off-by: Takeshi Kihara Fixes: 2660a6af690ebbb4 ("arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes") Signed-off-by: Geert Uytterhoeven Reviewed-by: Fabrizio Castro Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index f2e390f7f1d5..6590b63268b0 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for the RZ/G2E (R8A774C0) SoC * - * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018-2019 Renesas Electronics Corp. */ #include @@ -990,9 +990,8 @@ <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, - <&dmac2 0x5b>, <&dmac2 0x5a>; - dma-names = "tx", "rx", "tx", "rx"; + dmas = <&dmac0 0x5b>, <&dmac0 0x5a>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 202>; status = "disabled"; From 7f3d6c8e8f5f041c86c0a9f64e4b4ab7c6373ac2 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Wed, 20 Feb 2019 10:19:50 -0800 Subject: [PATCH 03/39] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support. We don't have ASB master/slave regs for this domain, so just skip that step. Signed-off-by: Eric Anholt Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") --- drivers/soc/bcm/bcm2835-power.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c index 48412957ec7a..4a1b99b773c0 100644 --- a/drivers/soc/bcm/bcm2835-power.c +++ b/drivers/soc/bcm/bcm2835-power.c @@ -150,7 +150,12 @@ struct bcm2835_power { static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg) { - u64 start = ktime_get_ns(); + u64 start; + + if (!reg) + return 0; + + start = ktime_get_ns(); /* Enable the module's async AXI bridges. */ ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP); @@ -165,7 +170,12 @@ static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg) static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg) { - u64 start = ktime_get_ns(); + u64 start; + + if (!reg) + return 0; + + start = ktime_get_ns(); /* Enable the module's async AXI bridges. */ ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP); From 4deabfae643d8852c643664d9088a647abfaa5d0 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Wed, 20 Feb 2019 10:19:51 -0800 Subject: [PATCH 04/39] soc: bcm: bcm2835-pm: Fix error paths of initialization. The clock driver may probe after ours and so we need to pass the -EPROBE_DEFER out. Fix the other error path while we're here. v2: Use dom->name instead of dom->gov as the flag for initialized domains, since we aren't setting up a governor. Make sure to clear ->clk when no clk is present in the DT. Signed-off-by: Eric Anholt Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") --- drivers/soc/bcm/bcm2835-power.c | 35 ++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c index 4a1b99b773c0..241c4ed80899 100644 --- a/drivers/soc/bcm/bcm2835-power.c +++ b/drivers/soc/bcm/bcm2835-power.c @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) } } -static void +static int bcm2835_init_power_domain(struct bcm2835_power *power, int pd_xlate_index, const char *name) { @@ -493,6 +493,17 @@ bcm2835_init_power_domain(struct bcm2835_power *power, struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; dom->clk = devm_clk_get(dev->parent, name); + if (IS_ERR(dom->clk)) { + int ret = PTR_ERR(dom->clk); + + if (ret == -EPROBE_DEFER) + return ret; + + /* Some domains don't have a clk, so make sure that we + * don't deref an error pointer later. + */ + dom->clk = NULL; + } dom->base.name = name; dom->base.power_on = bcm2835_power_pd_power_on; @@ -505,6 +516,8 @@ bcm2835_init_power_domain(struct bcm2835_power *power, pm_genpd_init(&dom->base, NULL, true); power->pd_xlate.domains[pd_xlate_index] = &dom->base; + + return 0; } /** bcm2835_reset_reset - Resets a block that has a reset line in the @@ -602,7 +615,7 @@ static int bcm2835_power_probe(struct platform_device *pdev) { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 }, { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 }, }; - int ret, i; + int ret = 0, i; u32 id; power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL); @@ -629,8 +642,11 @@ static int bcm2835_power_probe(struct platform_device *pdev) power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names); - for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) - bcm2835_init_power_domain(power, i, power_domain_names[i]); + for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) { + ret = bcm2835_init_power_domain(power, i, power_domain_names[i]); + if (ret) + goto fail; + } for (i = 0; i < ARRAY_SIZE(domain_deps); i++) { pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base, @@ -644,12 +660,21 @@ static int bcm2835_power_probe(struct platform_device *pdev) ret = devm_reset_controller_register(dev, &power->reset); if (ret) - return ret; + goto fail; of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate); dev_info(dev, "Broadcom BCM2835 power domains driver"); return 0; + +fail: + for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) { + struct generic_pm_domain *dom = &power->domains[i].base; + + if (dom->name) + pm_genpd_remove(dom); + } + return ret; } static int bcm2835_power_remove(struct platform_device *pdev) From 544e784188f1dd7c797c70b213385e67d92005b6 Mon Sep 17 00:00:00 2001 From: Helen Koike Date: Mon, 4 Mar 2019 18:48:37 -0300 Subject: [PATCH 05/39] ARM: dts: bcm283x: Fix hdmi hpd gpio pull Raspberry pi board model B revison 2 have the hot plug detector gpio active high (and not low as it was in the dts). Signed-off-by: Helen Koike Fixes: 49ac67e0c39c ("ARM: bcm2835: Add VC4 to the device tree.") Reviewed-by: Eric Anholt Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 5641d162dfdb..28e7513ce617 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -93,7 +93,7 @@ }; &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; }; &pwm { From cd479eccd2e057116d504852814402a1e68ead80 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 4 Mar 2019 12:33:28 +0100 Subject: [PATCH 06/39] s390: limit brk randomization to 32MB For a 64-bit process the randomization of the program break is quite large with 1GB. That is as big as the randomization of the anonymous mapping base, for a test case started with '/lib/ld64.so.1 ' it can happen that the heap is placed after the stack. To avoid this limit the program break randomization to 32MB for 64-bit and keep 8MB for 31-bit. Reported-by: Stefan Liebler Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/elf.h | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index 7d22a474a040..f74639a05f0f 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -252,11 +252,14 @@ do { \ /* * Cache aliasing on the latest machines calls for a mapping granularity - * of 512KB. For 64-bit processes use a 512KB alignment and a randomization - * of up to 1GB. For 31-bit processes the virtual address space is limited, - * use no alignment and limit the randomization to 8MB. + * of 512KB for the anonymous mapping base. For 64-bit processes use a + * 512KB alignment and a randomization of up to 1GB. For 31-bit processes + * the virtual address space is limited, use no alignment and limit the + * randomization to 8MB. + * For the additional randomization of the program break use 32MB for + * 64-bit and 8MB for 31-bit. */ -#define BRK_RND_MASK (is_compat_task() ? 0x7ffUL : 0x3ffffUL) +#define BRK_RND_MASK (is_compat_task() ? 0x7ffUL : 0x1fffUL) #define MMAP_RND_MASK (is_compat_task() ? 0x7ffUL : 0x3ff80UL) #define MMAP_ALIGN_MASK (is_compat_task() ? 0 : 0x7fUL) #define STACK_RND_MASK MMAP_RND_MASK From 01396a374c3d31bc5f8b693026cfa9a657319624 Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Fri, 22 Feb 2019 17:24:11 +0100 Subject: [PATCH 07/39] s390/zcrypt: revisit ap device remove procedure Working with the vfio-ap driver let to some revisit of the way how an ap (queue) device is removed from the driver. With the current implementation all the cleanup was done before the driver even got notified about the removal. Now the ap queue removal is done in 3 steps: 1) A preparation step, all ap messages within the queue are flushed and so the driver does 'receive' them. Also a new state AP_STATE_REMOVE assigned to the queue makes sure there are no new messages queued in. 2) Now the driver's remove function is invoked and the driver should do the job of cleaning up it's internal administration lists or whatever. After 2) is done it is guaranteed, that the driver is not invoked any more. On the other hand the driver has to make sure that the APQN is not accessed any more after step 2 is complete. 3) Now the ap bus code does the job of total cleanup of the APQN. A reset with zero is triggered and the state of the queue goes to AP_STATE_UNBOUND. After step 3) is complete, the ap queue has no pending messages and the APQN is cleared and so there are no requests and replies lingering around in the firmware queue for this APQN. Also the interrupts are disabled. After these remove steps the ap queue device may be assigned to another driver. Stress testing this remove/probe procedure showed a problem with the correct module reference counting. The actual receive of an reply in the driver is done asynchronous with completions. So with a driver change on an ap queue the message flush triggers completions but the threads waiting for the completions may run at a time where the queue already has the new driver assigned. So the module_put() at receive time needs to be done on the driver module which queued the ap message. This change is also part of this patch. Signed-off-by: Harald Freudenberger Reviewed-by: Ingo Franzki Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 9 ++++++++- drivers/s390/crypto/ap_bus.h | 2 ++ drivers/s390/crypto/ap_queue.c | 28 ++++++++++++++++++++++------ drivers/s390/crypto/zcrypt_api.c | 30 ++++++++++++++++++------------ 4 files changed, 50 insertions(+), 19 deletions(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index e15816ff1265..033a1acabf48 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -810,11 +810,18 @@ static int ap_device_remove(struct device *dev) struct ap_device *ap_dev = to_ap_dev(dev); struct ap_driver *ap_drv = ap_dev->drv; + /* prepare ap queue device removal */ if (is_queue_dev(dev)) - ap_queue_remove(to_ap_queue(dev)); + ap_queue_prepare_remove(to_ap_queue(dev)); + + /* driver's chance to clean up gracefully */ if (ap_drv->remove) ap_drv->remove(ap_dev); + /* now do the ap queue device remove */ + if (is_queue_dev(dev)) + ap_queue_remove(to_ap_queue(dev)); + /* Remove queue/card from list of active queues/cards */ spin_lock_bh(&ap_list_lock); if (is_card_dev(dev)) diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h index d0059eae5d94..15a98a673c5c 100644 --- a/drivers/s390/crypto/ap_bus.h +++ b/drivers/s390/crypto/ap_bus.h @@ -91,6 +91,7 @@ enum ap_state { AP_STATE_WORKING, AP_STATE_QUEUE_FULL, AP_STATE_SUSPEND_WAIT, + AP_STATE_REMOVE, /* about to be removed from driver */ AP_STATE_UNBOUND, /* momentary not bound to a driver */ AP_STATE_BORKED, /* broken */ NR_AP_STATES @@ -252,6 +253,7 @@ void ap_bus_force_rescan(void); void ap_queue_init_reply(struct ap_queue *aq, struct ap_message *ap_msg); struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type); +void ap_queue_prepare_remove(struct ap_queue *aq); void ap_queue_remove(struct ap_queue *aq); void ap_queue_suspend(struct ap_device *ap_dev); void ap_queue_resume(struct ap_device *ap_dev); diff --git a/drivers/s390/crypto/ap_queue.c b/drivers/s390/crypto/ap_queue.c index ba261210c6da..6a340f2c3556 100644 --- a/drivers/s390/crypto/ap_queue.c +++ b/drivers/s390/crypto/ap_queue.c @@ -420,6 +420,10 @@ static ap_func_t *ap_jumptable[NR_AP_STATES][NR_AP_EVENTS] = { [AP_EVENT_POLL] = ap_sm_suspend_read, [AP_EVENT_TIMEOUT] = ap_sm_nop, }, + [AP_STATE_REMOVE] = { + [AP_EVENT_POLL] = ap_sm_nop, + [AP_EVENT_TIMEOUT] = ap_sm_nop, + }, [AP_STATE_UNBOUND] = { [AP_EVENT_POLL] = ap_sm_nop, [AP_EVENT_TIMEOUT] = ap_sm_nop, @@ -740,18 +744,31 @@ void ap_flush_queue(struct ap_queue *aq) } EXPORT_SYMBOL(ap_flush_queue); +void ap_queue_prepare_remove(struct ap_queue *aq) +{ + spin_lock_bh(&aq->lock); + /* flush queue */ + __ap_flush_queue(aq); + /* set REMOVE state to prevent new messages are queued in */ + aq->state = AP_STATE_REMOVE; + del_timer_sync(&aq->timeout); + spin_unlock_bh(&aq->lock); +} + void ap_queue_remove(struct ap_queue *aq) { - ap_flush_queue(aq); - del_timer_sync(&aq->timeout); - - /* reset with zero, also clears irq registration */ + /* + * all messages have been flushed and the state is + * AP_STATE_REMOVE. Now reset with zero which also + * clears the irq registration and move the state + * to AP_STATE_UNBOUND to signal that this queue + * is not used by any driver currently. + */ spin_lock_bh(&aq->lock); ap_zapq(aq->qid); aq->state = AP_STATE_UNBOUND; spin_unlock_bh(&aq->lock); } -EXPORT_SYMBOL(ap_queue_remove); void ap_queue_reinit_state(struct ap_queue *aq) { @@ -760,4 +777,3 @@ void ap_queue_reinit_state(struct ap_queue *aq) ap_wait(ap_sm_event(aq, AP_EVENT_POLL)); spin_unlock_bh(&aq->lock); } -EXPORT_SYMBOL(ap_queue_reinit_state); diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c index eb93c2d27d0a..689c2af7026a 100644 --- a/drivers/s390/crypto/zcrypt_api.c +++ b/drivers/s390/crypto/zcrypt_api.c @@ -586,6 +586,7 @@ static inline bool zcrypt_check_queue(struct ap_perms *perms, int queue) static inline struct zcrypt_queue *zcrypt_pick_queue(struct zcrypt_card *zc, struct zcrypt_queue *zq, + struct module **pmod, unsigned int weight) { if (!zq || !try_module_get(zq->queue->ap_dev.drv->driver.owner)) @@ -595,15 +596,15 @@ static inline struct zcrypt_queue *zcrypt_pick_queue(struct zcrypt_card *zc, atomic_add(weight, &zc->load); atomic_add(weight, &zq->load); zq->request_count++; + *pmod = zq->queue->ap_dev.drv->driver.owner; return zq; } static inline void zcrypt_drop_queue(struct zcrypt_card *zc, struct zcrypt_queue *zq, + struct module *mod, unsigned int weight) { - struct module *mod = zq->queue->ap_dev.drv->driver.owner; - zq->request_count--; atomic_sub(weight, &zc->load); atomic_sub(weight, &zq->load); @@ -653,6 +654,7 @@ static long zcrypt_rsa_modexpo(struct ap_perms *perms, unsigned int weight, pref_weight; unsigned int func_code; int qid = 0, rc = -ENODEV; + struct module *mod; trace_s390_zcrypt_req(mex, TP_ICARSAMODEXPO); @@ -706,7 +708,7 @@ static long zcrypt_rsa_modexpo(struct ap_perms *perms, pref_weight = weight; } } - pref_zq = zcrypt_pick_queue(pref_zc, pref_zq, weight); + pref_zq = zcrypt_pick_queue(pref_zc, pref_zq, &mod, weight); spin_unlock(&zcrypt_list_lock); if (!pref_zq) { @@ -718,7 +720,7 @@ static long zcrypt_rsa_modexpo(struct ap_perms *perms, rc = pref_zq->ops->rsa_modexpo(pref_zq, mex); spin_lock(&zcrypt_list_lock); - zcrypt_drop_queue(pref_zc, pref_zq, weight); + zcrypt_drop_queue(pref_zc, pref_zq, mod, weight); spin_unlock(&zcrypt_list_lock); out: @@ -735,6 +737,7 @@ static long zcrypt_rsa_crt(struct ap_perms *perms, unsigned int weight, pref_weight; unsigned int func_code; int qid = 0, rc = -ENODEV; + struct module *mod; trace_s390_zcrypt_req(crt, TP_ICARSACRT); @@ -788,7 +791,7 @@ static long zcrypt_rsa_crt(struct ap_perms *perms, pref_weight = weight; } } - pref_zq = zcrypt_pick_queue(pref_zc, pref_zq, weight); + pref_zq = zcrypt_pick_queue(pref_zc, pref_zq, &mod, weight); spin_unlock(&zcrypt_list_lock); if (!pref_zq) { @@ -800,7 +803,7 @@ static long zcrypt_rsa_crt(struct ap_perms *perms, rc = pref_zq->ops->rsa_modexpo_crt(pref_zq, crt); spin_lock(&zcrypt_list_lock); - zcrypt_drop_queue(pref_zc, pref_zq, weight); + zcrypt_drop_queue(pref_zc, pref_zq, mod, weight); spin_unlock(&zcrypt_list_lock); out: @@ -819,6 +822,7 @@ static long _zcrypt_send_cprb(struct ap_perms *perms, unsigned int func_code; unsigned short *domain; int qid = 0, rc = -ENODEV; + struct module *mod; trace_s390_zcrypt_req(xcRB, TB_ZSECSENDCPRB); @@ -865,7 +869,7 @@ static long _zcrypt_send_cprb(struct ap_perms *perms, pref_weight = weight; } } - pref_zq = zcrypt_pick_queue(pref_zc, pref_zq, weight); + pref_zq = zcrypt_pick_queue(pref_zc, pref_zq, &mod, weight); spin_unlock(&zcrypt_list_lock); if (!pref_zq) { @@ -881,7 +885,7 @@ static long _zcrypt_send_cprb(struct ap_perms *perms, rc = pref_zq->ops->send_cprb(pref_zq, xcRB, &ap_msg); spin_lock(&zcrypt_list_lock); - zcrypt_drop_queue(pref_zc, pref_zq, weight); + zcrypt_drop_queue(pref_zc, pref_zq, mod, weight); spin_unlock(&zcrypt_list_lock); out: @@ -932,6 +936,7 @@ static long zcrypt_send_ep11_cprb(struct ap_perms *perms, unsigned int func_code; struct ap_message ap_msg; int qid = 0, rc = -ENODEV; + struct module *mod; trace_s390_zcrypt_req(xcrb, TP_ZSENDEP11CPRB); @@ -1000,7 +1005,7 @@ static long zcrypt_send_ep11_cprb(struct ap_perms *perms, pref_weight = weight; } } - pref_zq = zcrypt_pick_queue(pref_zc, pref_zq, weight); + pref_zq = zcrypt_pick_queue(pref_zc, pref_zq, &mod, weight); spin_unlock(&zcrypt_list_lock); if (!pref_zq) { @@ -1012,7 +1017,7 @@ static long zcrypt_send_ep11_cprb(struct ap_perms *perms, rc = pref_zq->ops->send_ep11_cprb(pref_zq, xcrb, &ap_msg); spin_lock(&zcrypt_list_lock); - zcrypt_drop_queue(pref_zc, pref_zq, weight); + zcrypt_drop_queue(pref_zc, pref_zq, mod, weight); spin_unlock(&zcrypt_list_lock); out_free: @@ -1033,6 +1038,7 @@ static long zcrypt_rng(char *buffer) struct ap_message ap_msg; unsigned int domain; int qid = 0, rc = -ENODEV; + struct module *mod; trace_s390_zcrypt_req(buffer, TP_HWRNGCPRB); @@ -1064,7 +1070,7 @@ static long zcrypt_rng(char *buffer) pref_weight = weight; } } - pref_zq = zcrypt_pick_queue(pref_zc, pref_zq, weight); + pref_zq = zcrypt_pick_queue(pref_zc, pref_zq, &mod, weight); spin_unlock(&zcrypt_list_lock); if (!pref_zq) { @@ -1076,7 +1082,7 @@ static long zcrypt_rng(char *buffer) rc = pref_zq->ops->rng(pref_zq, buffer, &ap_msg); spin_lock(&zcrypt_list_lock); - zcrypt_drop_queue(pref_zc, pref_zq, weight); + zcrypt_drop_queue(pref_zc, pref_zq, mod, weight); spin_unlock(&zcrypt_list_lock); out: From 152e9b8676c6e788c6bff095c1eaae7b86df5003 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 6 Mar 2019 13:31:21 +0200 Subject: [PATCH 08/39] s390/vtime: steal time exponential moving average To be able to judge the current overcommitment ratio for a CPU add a lowcore field with the exponential moving average of the steal time. The average is updated every tick. Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/lowcore.h | 61 +++++++++++++++++---------------- arch/s390/kernel/smp.c | 3 +- arch/s390/kernel/vtime.c | 19 ++++++---- 3 files changed, 45 insertions(+), 38 deletions(-) diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index cc0947e08b6f..5b9f10b1e55d 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -91,52 +91,53 @@ struct lowcore { __u64 hardirq_timer; /* 0x02e8 */ __u64 softirq_timer; /* 0x02f0 */ __u64 steal_timer; /* 0x02f8 */ - __u64 last_update_timer; /* 0x0300 */ - __u64 last_update_clock; /* 0x0308 */ - __u64 int_clock; /* 0x0310 */ - __u64 mcck_clock; /* 0x0318 */ - __u64 clock_comparator; /* 0x0320 */ - __u64 boot_clock[2]; /* 0x0328 */ + __u64 avg_steal_timer; /* 0x0300 */ + __u64 last_update_timer; /* 0x0308 */ + __u64 last_update_clock; /* 0x0310 */ + __u64 int_clock; /* 0x0318*/ + __u64 mcck_clock; /* 0x0320 */ + __u64 clock_comparator; /* 0x0328 */ + __u64 boot_clock[2]; /* 0x0330 */ /* Current process. */ - __u64 current_task; /* 0x0338 */ - __u64 kernel_stack; /* 0x0340 */ + __u64 current_task; /* 0x0340 */ + __u64 kernel_stack; /* 0x0348 */ /* Interrupt, DAT-off and restartstack. */ - __u64 async_stack; /* 0x0348 */ - __u64 nodat_stack; /* 0x0350 */ - __u64 restart_stack; /* 0x0358 */ + __u64 async_stack; /* 0x0350 */ + __u64 nodat_stack; /* 0x0358 */ + __u64 restart_stack; /* 0x0360 */ /* Restart function and parameter. */ - __u64 restart_fn; /* 0x0360 */ - __u64 restart_data; /* 0x0368 */ - __u64 restart_source; /* 0x0370 */ + __u64 restart_fn; /* 0x0368 */ + __u64 restart_data; /* 0x0370 */ + __u64 restart_source; /* 0x0378 */ /* Address space pointer. */ - __u64 kernel_asce; /* 0x0378 */ - __u64 user_asce; /* 0x0380 */ - __u64 vdso_asce; /* 0x0388 */ + __u64 kernel_asce; /* 0x0380 */ + __u64 user_asce; /* 0x0388 */ + __u64 vdso_asce; /* 0x0390 */ /* * The lpp and current_pid fields form a * 64-bit value that is set as program * parameter with the LPP instruction. */ - __u32 lpp; /* 0x0390 */ - __u32 current_pid; /* 0x0394 */ + __u32 lpp; /* 0x0398 */ + __u32 current_pid; /* 0x039c */ /* SMP info area */ - __u32 cpu_nr; /* 0x0398 */ - __u32 softirq_pending; /* 0x039c */ - __u32 preempt_count; /* 0x03a0 */ - __u32 spinlock_lockval; /* 0x03a4 */ - __u32 spinlock_index; /* 0x03a8 */ - __u32 fpu_flags; /* 0x03ac */ - __u64 percpu_offset; /* 0x03b0 */ - __u64 vdso_per_cpu_data; /* 0x03b8 */ - __u64 machine_flags; /* 0x03c0 */ - __u64 gmap; /* 0x03c8 */ - __u8 pad_0x03d0[0x0400-0x03d0]; /* 0x03d0 */ + __u32 cpu_nr; /* 0x03a0 */ + __u32 softirq_pending; /* 0x03a4 */ + __u32 preempt_count; /* 0x03a8 */ + __u32 spinlock_lockval; /* 0x03ac */ + __u32 spinlock_index; /* 0x03b0 */ + __u32 fpu_flags; /* 0x03b4 */ + __u64 percpu_offset; /* 0x03b8 */ + __u64 vdso_per_cpu_data; /* 0x03c0 */ + __u64 machine_flags; /* 0x03c8 */ + __u64 gmap; /* 0x03d0 */ + __u8 pad_0x03d8[0x0400-0x03d8]; /* 0x03d8 */ /* br %r1 trampoline */ __u16 br_r1_trampoline; /* 0x0400 */ diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index b198ece2aad6..b8eb99685546 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -266,7 +266,8 @@ static void pcpu_prepare_secondary(struct pcpu *pcpu, int cpu) lc->percpu_offset = __per_cpu_offset[cpu]; lc->kernel_asce = S390_lowcore.kernel_asce; lc->machine_flags = S390_lowcore.machine_flags; - lc->user_timer = lc->system_timer = lc->steal_timer = 0; + lc->user_timer = lc->system_timer = + lc->steal_timer = lc->avg_steal_timer = 0; __ctl_store(lc->cregs_save_area, 0, 15); save_access_regs((unsigned int *) lc->access_regs_save_area); memcpy(lc->stfle_fac_list, S390_lowcore.stfle_fac_list, diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 98f850e00008..a69a0911ed0e 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -124,7 +124,7 @@ static void account_system_index_scaled(struct task_struct *p, u64 cputime, */ static int do_account_vtime(struct task_struct *tsk) { - u64 timer, clock, user, guest, system, hardirq, softirq, steal; + u64 timer, clock, user, guest, system, hardirq, softirq; timer = S390_lowcore.last_update_timer; clock = S390_lowcore.last_update_clock; @@ -182,12 +182,6 @@ static int do_account_vtime(struct task_struct *tsk) if (softirq) account_system_index_scaled(tsk, softirq, CPUTIME_SOFTIRQ); - steal = S390_lowcore.steal_timer; - if ((s64) steal > 0) { - S390_lowcore.steal_timer = 0; - account_steal_time(cputime_to_nsecs(steal)); - } - return virt_timer_forward(user + guest + system + hardirq + softirq); } @@ -213,8 +207,19 @@ void vtime_task_switch(struct task_struct *prev) */ void vtime_flush(struct task_struct *tsk) { + u64 steal, avg_steal; + if (do_account_vtime(tsk)) virt_timer_expire(); + + steal = S390_lowcore.steal_timer; + avg_steal = S390_lowcore.avg_steal_timer / 2; + if ((s64) steal > 0) { + S390_lowcore.steal_timer = 0; + account_steal_time(steal); + avg_steal += steal; + } + S390_lowcore.avg_steal_timer = avg_steal; } /* From 50b7f1b7236bab08ebbbecf90521e84b068d7a17 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Mon, 11 Mar 2019 10:59:53 +0100 Subject: [PATCH 09/39] vfio: ccw: only free cp on final interrupt When we get an interrupt for a channel program, it is not necessarily the final interrupt; for example, the issuing guest may request an intermediate interrupt by specifying the program-controlled-interrupt flag on a ccw. We must not switch the state to idle if the interrupt is not yet final; even more importantly, we must not free the translated channel program if the interrupt is not yet final, or the host can crash during cp rewind. Fixes: e5f84dbaea59 ("vfio: ccw: return I/O results asynchronously") Cc: stable@vger.kernel.org # v4.12+ Reviewed-by: Eric Farman Signed-off-by: Cornelia Huck --- drivers/s390/cio/vfio_ccw_drv.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/vfio_ccw_drv.c b/drivers/s390/cio/vfio_ccw_drv.c index a10cec0e86eb..0b3b9de45c60 100644 --- a/drivers/s390/cio/vfio_ccw_drv.c +++ b/drivers/s390/cio/vfio_ccw_drv.c @@ -72,20 +72,24 @@ static void vfio_ccw_sch_io_todo(struct work_struct *work) { struct vfio_ccw_private *private; struct irb *irb; + bool is_final; private = container_of(work, struct vfio_ccw_private, io_work); irb = &private->irb; + is_final = !(scsw_actl(&irb->scsw) & + (SCSW_ACTL_DEVACT | SCSW_ACTL_SCHACT)); if (scsw_is_solicited(&irb->scsw)) { cp_update_scsw(&private->cp, &irb->scsw); - cp_free(&private->cp); + if (is_final) + cp_free(&private->cp); } memcpy(private->io_region->irb_area, irb, sizeof(*irb)); if (private->io_trigger) eventfd_signal(private->io_trigger, 1); - if (private->mdev) + if (private->mdev && is_final) private->state = VFIO_CCW_STATE_IDLE; } From 0d9c038feff6f834ad9e5d88b66715235ab23ff3 Mon Sep 17 00:00:00 2001 From: Tony Krowiak Date: Mon, 18 Feb 2019 12:01:35 -0500 Subject: [PATCH 10/39] zcrypt: handle AP Info notification from CHSC SEI command The current AP bus implementation periodically polls the AP configuration to detect changes. When the AP configuration is dynamically changed via the SE or an SCLP instruction, the changes will not be reflected to sysfs until the next time the AP configuration is polled. The CHSC architecture provides a Store Event Information (SEI) command to make notification of an AP configuration change. This patch introduces a handler to process notification from the CHSC SEI command by immediately kicking off an AP bus scan-after-event. Signed-off-by: Tony Krowiak Reviewed-by: Halil Pasic Reviewed-by: Sebastian Ott Reviewed-by: Harald Freudenberger Reviewed-by: Cornelia Huck Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/ap.h | 11 +++++++++++ drivers/s390/cio/chsc.c | 13 +++++++++++++ drivers/s390/crypto/ap_bus.c | 10 ++++++++++ 3 files changed, 34 insertions(+) diff --git a/arch/s390/include/asm/ap.h b/arch/s390/include/asm/ap.h index 1a6a7092d942..e94a0a28b5eb 100644 --- a/arch/s390/include/asm/ap.h +++ b/arch/s390/include/asm/ap.h @@ -360,4 +360,15 @@ static inline struct ap_queue_status ap_dqap(ap_qid_t qid, return reg1; } +/* + * Interface to tell the AP bus code that a configuration + * change has happened. The bus code should at least do + * an ap bus resource rescan. + */ +#if IS_ENABLED(CONFIG_ZCRYPT) +void ap_bus_cfg_chg(void); +#else +static inline void ap_bus_cfg_chg(void){}; +#endif + #endif /* _ASM_S390_AP_H_ */ diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index a0baee25134c..eaf4699be2c5 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "css.h" #include "cio.h" @@ -586,6 +587,15 @@ static void chsc_process_sei_scm_avail(struct chsc_sei_nt0_area *sei_area) " failed (rc=%d).\n", ret); } +static void chsc_process_sei_ap_cfg_chg(struct chsc_sei_nt0_area *sei_area) +{ + CIO_CRW_EVENT(3, "chsc: ap config changed\n"); + if (sei_area->rs != 5) + return; + + ap_bus_cfg_chg(); +} + static void chsc_process_sei_nt2(struct chsc_sei_nt2_area *sei_area) { switch (sei_area->cc) { @@ -612,6 +622,9 @@ static void chsc_process_sei_nt0(struct chsc_sei_nt0_area *sei_area) case 2: /* i/o resource accessibility */ chsc_process_sei_res_acc(sei_area); break; + case 3: /* ap config changed */ + chsc_process_sei_ap_cfg_chg(sei_area); + break; case 7: /* channel-path-availability information */ chsc_process_sei_chp_avail(sei_area); break; diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 033a1acabf48..1546389d71db 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -867,6 +867,16 @@ void ap_bus_force_rescan(void) } EXPORT_SYMBOL(ap_bus_force_rescan); +/* +* A config change has happened, force an ap bus rescan. +*/ +void ap_bus_cfg_chg(void) +{ + AP_DBF(DBF_INFO, "%s config change, forcing bus rescan\n", __func__); + + ap_bus_force_rescan(); +} + /* * hex2bitmap() - parse hex mask string and set bitmap. * Valid strings are "0x012345678" with at least one valid hex number. From 7a9b6be9fe58194d9a349159176e8cc0d8f10ef8 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Fri, 8 Mar 2019 13:02:16 -0800 Subject: [PATCH 11/39] arm64: bcm2835: Add missing dependency on MFD_CORE. When adding the MFD dependency for power domains and WDT in bcm2835, I added it only on the arm32 side and missed it for arm64. Fixes: 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.") Signed-off-by: Eric Anholt Reported-by: Stefan Wahren Acked-by: Stefan Wahren --- arch/arm64/Kconfig.platforms | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 251ecf34cb02..50f9fb562059 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -27,6 +27,7 @@ config ARCH_BCM2835 bool "Broadcom BCM2835 family" select TIMER_OF select GPIOLIB + select MFD_CORE select PINCTRL select PINCTRL_BCM2835 select ARM_AMBA From 1a7ee0efb26d6e25433c6d4428028ac614f55ff1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Vok=C3=A1=C4=8D?= Date: Fri, 1 Mar 2019 08:26:42 +0100 Subject: [PATCH 12/39] ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use rgmii-id phy mode for the CPU port (MAC0) of the QCA8334 switch to add delays to both Tx and Rx clock. It worked with the rgmii mode before because the qca8k driver (incorrectly) enabled delays in that mode and rgmii-id was not implemented at all. Commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay for RGMII mode") removed the delays from the RGMII mode and hence broke the networking. To fix the problem, commit a968b5e9d587 ("net: dsa: qca8k: Enable delay for RGMII_ID mode") was introduced. Now the correct phy mode is available so use it. Signed-off-by: Michal Vokáč Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index b715ab0fa1ff..091d829f6b05 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -125,7 +125,7 @@ ethphy0: port@0 { reg = <0>; label = "cpu"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; ethernet = <&fec>; fixed-link { From 0c17e83fe423467e3ccf0a02f99bd050a73bbeb4 Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Fri, 1 Mar 2019 16:56:46 +0800 Subject: [PATCH 13/39] ARM: imx51: fix a leaked reference by adding missing of_node_put The call to of_get_next_child returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./arch/arm/mach-imx/mach-imx51.c:64:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 57, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Russell King Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Lucas Stach Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx51.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index c7169c2f94c4..08c7892866c2 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -59,6 +59,7 @@ static void __init imx51_m4if_setup(void) return; m4if_base = of_iomap(np, 0); + of_node_put(np); if (!m4if_base) { pr_err("Unable to map M4IF registers\n"); return; From 91740fc8242b4f260cfa4d4536d8551804777fae Mon Sep 17 00:00:00 2001 From: Kohji Okuno Date: Tue, 26 Feb 2019 11:34:13 +0900 Subject: [PATCH 14/39] ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time In the current cpuidle implementation for i.MX6q, the CPU that sets 'WAIT_UNCLOCKED' and the CPU that returns to 'WAIT_CLOCKED' are always the same. While the CPU that sets 'WAIT_UNCLOCKED' is in IDLE state of "WAIT", if the other CPU wakes up and enters IDLE state of "WFI" istead of "WAIT", this CPU can not wake up at expired time. Because, in the case of "WFI", the CPU must be waked up by the local timer interrupt. But, while 'WAIT_UNCLOCKED' is set, the local timer is stopped, when all CPUs execute "wfi" instruction. As a result, the local timer interrupt is not fired. In this situation, this CPU will wake up by IRQ different from local timer. (e.g. broacast timer) So, this fix changes CPU to return to 'WAIT_CLOCKED'. Signed-off-by: Kohji Okuno Fixes: e5f9dec8ff5f ("ARM: imx6q: support WAIT mode using cpuidle") Cc: Signed-off-by: Shawn Guo --- arch/arm/mach-imx/cpuidle-imx6q.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index bfeb25aaf9a2..326e870d7123 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -16,30 +16,23 @@ #include "cpuidle.h" #include "hardware.h" -static atomic_t master = ATOMIC_INIT(0); -static DEFINE_SPINLOCK(master_lock); +static int num_idle_cpus = 0; +static DEFINE_SPINLOCK(cpuidle_lock); static int imx6q_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - if (atomic_inc_return(&master) == num_online_cpus()) { - /* - * With this lock, we prevent other cpu to exit and enter - * this function again and become the master. - */ - if (!spin_trylock(&master_lock)) - goto idle; + spin_lock(&cpuidle_lock); + if (++num_idle_cpus == num_online_cpus()) imx6_set_lpm(WAIT_UNCLOCKED); - cpu_do_idle(); - imx6_set_lpm(WAIT_CLOCKED); - spin_unlock(&master_lock); - goto done; - } + spin_unlock(&cpuidle_lock); -idle: cpu_do_idle(); -done: - atomic_dec(&master); + + spin_lock(&cpuidle_lock); + if (num_idle_cpus-- == num_online_cpus()) + imx6_set_lpm(WAIT_CLOCKED); + spin_unlock(&cpuidle_lock); return index; } From 032f85c9360fb1a08385c584c2c4ed114b33c260 Mon Sep 17 00:00:00 2001 From: Marco Felsch Date: Mon, 4 Mar 2019 11:49:40 +0100 Subject: [PATCH 15/39] ARM: dts: pfla02: increase phy reset duration Increase the reset duration to ensure correct phy functionality. The reset duration is taken from barebox commit 52fdd510de ("ARM: dts: pfla02: use long enough reset for ethernet phy"): Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a small percentage of modules have 'transmission timeouts' errors like barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0 warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3 eth0: 1000Mbps full duplex link detected eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout Cc: Stefan Christ Cc: Christian Hemp Signed-off-by: Marco Felsch Fixes: 3180f956668e ("ARM: dts: Phytec imx6q pfla02 and pbab01 support") Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 433bf09a1954..027df06c5dc7 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -91,6 +91,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-handle = <ðphy>; phy-mode = "rgmii"; + phy-reset-duration = <10>; /* in msecs */ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; phy-supply = <&vdd_eth_io_reg>; status = "disabled"; From 3123be11683ed8c2f26f787df81966b538ca9f72 Mon Sep 17 00:00:00 2001 From: Nishad Kamdar Date: Mon, 11 Mar 2019 19:57:04 +0530 Subject: [PATCH 16/39] ARM: dts: imx6ull: Use the correct style for SPDX License Identifier This patch corrects the SPDX License Identifier style in imx6ull-pinfunc-snvs.h. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 and making some manual changes. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ull-pinfunc-snvs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h index f6fb6783c193..54cfe72295aa 100644 --- a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h +++ b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. * Copyright (C) 2017 NXP From 41b37f4c0fa67185691bcbd30201cad566f2f0d1 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 19 Mar 2019 01:30:09 +0900 Subject: [PATCH 17/39] ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi This patch fixes a spelling typo. Signed-off-by: Masanari Iida Fixes: cc42603de320 ("ARM: dts: imx6q-icore-rqs: Add Engicam IMX6 Q7 initial support") Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index 1d1b4bd0670f..a4217f564a53 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -264,7 +264,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; vmcc-supply = <®_sd3_vmmc>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - bus-witdh = <4>; + bus-width = <4>; no-1-8-v; status = "okay"; }; @@ -275,7 +275,7 @@ pinctrl-1 = <&pinctrl_usdhc4_100mhz>; pinctrl-2 = <&pinctrl_usdhc4_200mhz>; vmcc-supply = <®_sd4_vmmc>; - bus-witdh = <8>; + bus-width = <8>; no-1-8-v; non-removable; status = "okay"; From 15b43e497ffd80ca44c00d781869a0e71f223ea5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Vok=C3=A1=C4=8D?= Date: Wed, 20 Mar 2019 12:09:05 +0100 Subject: [PATCH 18/39] ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The switch is accessible through pseudo PHY which is located at 0x10. Signed-off-by: Michal Vokáč Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards") Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 091d829f6b05..e8d800fec637 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -114,9 +114,9 @@ reg = <2>; }; - switch@0 { + switch@10 { compatible = "qca,qca8334"; - reg = <0>; + reg = <10>; switch_ports: ports { #address-cells = <1>; From 728e096dd70889c2e80dd4153feee91afb1daf72 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 10 Jan 2019 21:19:33 +0100 Subject: [PATCH 19/39] ARM: imx_v6_v7_defconfig: continue compiling the pwm driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After the pwm-imx driver was split into two drivers and the Kconfig symbol changed accordingly, use the new name to continue being able to use the PWM hardware. Signed-off-by: Uwe Kleine-König Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v6_v7_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 5586a5074a96..50fb01d70b10 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -398,7 +398,7 @@ CONFIG_MAG3110=y CONFIG_MPL3115=y CONFIG_PWM=y CONFIG_PWM_FSL_FTM=y -CONFIG_PWM_IMX=y +CONFIG_PWM_IMX27=y CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_VF610_OCOTP=y CONFIG_TEE=y From 507aaeeef80d70c46bdf07cda49234b36c2bbdcb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 10 Jan 2019 21:19:34 +0100 Subject: [PATCH 20/39] ARM: imx_v4_v5_defconfig: enable PWM driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While there is no mainline board that makes use of the PWM still enable the driver for it to increase compile test coverage. Signed-off-by: Uwe Kleine-König Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v4_v5_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 8661dd9b064a..b37f8e675e40 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -170,6 +170,9 @@ CONFIG_IMX_SDMA=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_FSL_MX25_ADC=y +CONFIG_PWM=y +CONFIG_PWM_IMX1=y +CONFIG_PWM_IMX27=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y From 2dbed152e2d4c3fe2442284918d14797898b1e8a Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 20 Feb 2019 16:36:52 +0530 Subject: [PATCH 21/39] ARM: davinci: fix build failure with allnoconfig allnoconfig build with just ARCH_DAVINCI enabled fails because drivers/clk/davinci/* depends on REGMAP being enabled. Fix it by selecting REGMAP_MMIO when building in DaVinci support. Signed-off-by: Sekhar Nori Reviewed-by: David Lechner Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 054ead960f98..850b4805e2d1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -596,6 +596,7 @@ config ARCH_DAVINCI select HAVE_IDE select PM_GENERIC_DOMAINS if PM select PM_GENERIC_DOMAINS_OF if PM && OF + select REGMAP_MMIO select RESET_CONTROLLER select SPARSE_IRQ select USE_OF From fa9463564e77067df81b0b8dec91adbbbc47bfb4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 18 Mar 2019 16:31:22 +0100 Subject: [PATCH 22/39] ARM: dts: nomadik: Fix polarity of SPI CS The SPI DT bindings are for historical reasons a pitfall, the ability to flag a GPIO line as active high/low with the second cell flags was introduced later so the SPI subsystem will only accept the bool flag spi-cs-high to indicate that the line is active high. It worked by mistake, but the mistake was corrected in another commit. The comment in the DTS file was also misleading: this CS is indeed active high. Fixes: cffbb02dafa3 ("ARM: dts: nomadik: Augment NHK15 panel setting") Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/ste-nomadik-nhk15.dts | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 04066f9cb8a3..f2f6558a00f1 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -213,12 +213,13 @@ gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* - * It's not actually active high, but the frameworks assume - * the polarity of the passed-in GPIO is "normal" (active - * high) then actively drives the line low to select the - * chip. + * This chipselect is active high. Just setting the flags + * to GPIO_ACTIVE_HIGH is not enough for the SPI DT bindings, + * it will be ignored, only the special "spi-cs-high" flag + * really counts. */ cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + spi-cs-high; num-chipselects = <1>; /* From 93958742192e7956d05989836ada9071f9ffe42e Mon Sep 17 00:00:00 2001 From: Jonathan Hunter Date: Mon, 25 Mar 2019 12:28:07 +0100 Subject: [PATCH 23/39] arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186 Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression that is causing accesses to the file-system on the eMMC to fail. Errors such as the following have been observed ... mmc2: running CQE recovery mmc2: mmc_select_hs400 failed, error -110 print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700 mmc2: cqhci: CQE failed to exit halt state For now disable CQE support for Tegra186 until this issue is resolved. Fixes: dfd3cb6feb73 arm64: tegra: Add CQE Support for SDMMC4 Signed-off-by: Jonathan Hunter Signed-off-by: Thierry Reding Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index bb2045be8814..97aeb946ed5e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -321,7 +321,6 @@ nvidia,default-trim = <0x9>; nvidia,dqs-trim = <63>; mmc-hs400-1_8v; - supports-cqe; status = "disabled"; }; From b6ffdf27f3d4f1e9af56effe6f86989170d71e95 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Mon, 18 Mar 2019 15:50:27 +0100 Subject: [PATCH 24/39] s390/cpumf: Fix warning from check_processor_id Function __hw_perf_event_init() used a CPU variable without ensuring CPU preemption has been disabled. This caused the following warning in the kernel log: [ 7.277085] BUG: using smp_processor_id() in preemptible [00000000] code: cf-csdiag/1892 [ 7.277111] caller is cf_diag_event_init+0x13a/0x338 [ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted 5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1 [ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR) [ 7.277139] Call Trace: [ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0) [ 7.277161] [<0000000000b7a71a>] dump_stack+0x92/0xd0 [ 7.277174] [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100 [ 7.277183] [<00000000001228aa>] cf_diag_event_init+0x13a/0x338 [ 7.277195] [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0 [ 7.277204] [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0 [ 7.277214] [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50 [ 7.277224] [<0000000000b9e8f0>] system_call+0xdc/0x2d8 [ 7.277233] 2 locks held by cf-csdiag/1892: [ 7.277241] #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.}, at: __s390x_sys_perf_event_open+0xd2e/0xd50 [ 7.277257] #1: 00000000363b11bd (&pmus_srcu){....}, at: perf_event_alloc+0x52e/0xce0 The variable is now accessed in proper context. Use get_cpu_var()/put_cpu_var() pair to disable preemption during access. As the hardware authorization settings apply to all CPUs, it does not matter which CPU is used to check the authorization setting. Remove the event->count assignment. It is not needed as function perf_event_alloc() allocates memory for the event with kzalloc() and thus count is already set to zero. Fixes: fe5908bccc56 ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace") Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/perf_cpum_cf_diag.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/s390/kernel/perf_cpum_cf_diag.c b/arch/s390/kernel/perf_cpum_cf_diag.c index c6fad208c2fa..b6854812d2ed 100644 --- a/arch/s390/kernel/perf_cpum_cf_diag.c +++ b/arch/s390/kernel/perf_cpum_cf_diag.c @@ -196,23 +196,30 @@ static void cf_diag_perf_event_destroy(struct perf_event *event) */ static int __hw_perf_event_init(struct perf_event *event) { - struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events); struct perf_event_attr *attr = &event->attr; + struct cpu_cf_events *cpuhw; enum cpumf_ctr_set i; int err = 0; - debug_sprintf_event(cf_diag_dbg, 5, - "%s event %p cpu %d authorized %#x\n", __func__, - event, event->cpu, cpuhw->info.auth_ctl); + debug_sprintf_event(cf_diag_dbg, 5, "%s event %p cpu %d\n", __func__, + event, event->cpu); event->hw.config = attr->config; event->hw.config_base = 0; - local64_set(&event->count, 0); - /* Add all authorized counter sets to config_base */ + /* Add all authorized counter sets to config_base. The + * the hardware init function is either called per-cpu or just once + * for all CPUS (event->cpu == -1). This depends on the whether + * counting is started for all CPUs or on a per workload base where + * the perf event moves from one CPU to another CPU. + * Checking the authorization on any CPU is fine as the hardware + * applies the same authorization settings to all CPUs. + */ + cpuhw = &get_cpu_var(cpu_cf_events); for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) if (cpuhw->info.auth_ctl & cpumf_ctr_ctl[i]) event->hw.config_base |= cpumf_ctr_ctl[i]; + put_cpu_var(cpu_cf_events); /* No authorized counter sets, nothing to count/sample */ if (!event->hw.config_base) { From 7d6ab823d6461e60d211d4c8d89a13dce08b730d Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Mar 2019 22:53:31 +0000 Subject: [PATCH 25/39] vfs: Update mount API docs Update the mount API docs to reflect recent changes to the code. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- Documentation/filesystems/mount_api.txt | 365 +++++++++++++----------- 1 file changed, 194 insertions(+), 171 deletions(-) diff --git a/Documentation/filesystems/mount_api.txt b/Documentation/filesystems/mount_api.txt index 944d1965e917..00ff0cfccfa7 100644 --- a/Documentation/filesystems/mount_api.txt +++ b/Documentation/filesystems/mount_api.txt @@ -12,11 +12,13 @@ CONTENTS (4) Filesystem context security. - (5) VFS filesystem context operations. + (5) VFS filesystem context API. - (6) Parameter description. + (6) Superblock creation helpers. - (7) Parameter helper functions. + (7) Parameter description. + + (8) Parameter helper functions. ======== @@ -41,12 +43,15 @@ The creation of new mounts is now to be done in a multistep process: (7) Destroy the context. -To support this, the file_system_type struct gains a new field: +To support this, the file_system_type struct gains two new fields: int (*init_fs_context)(struct fs_context *fc); + const struct fs_parameter_description *parameters; -which is invoked to set up the filesystem-specific parts of a filesystem -context, including the additional space. +The first is invoked to set up the filesystem-specific parts of a filesystem +context, including the additional space, and the second points to the +parameter description for validation at registration time and querying by a +future system call. Note that security initialisation is done *after* the filesystem is called so that the namespaces may be adjusted first. @@ -73,9 +78,9 @@ context. This is represented by the fs_context structure: void *s_fs_info; unsigned int sb_flags; unsigned int sb_flags_mask; + unsigned int s_iflags; + unsigned int lsm_flags; enum fs_context_purpose purpose:8; - bool sloppy:1; - bool silent:1; ... }; @@ -141,6 +146,10 @@ The fs_context fields are as follows: Which bits SB_* flags are to be set/cleared in super_block::s_flags. + (*) unsigned int s_iflags + + These will be bitwise-OR'd with s->s_iflags when a superblock is created. + (*) enum fs_context_purpose This indicates the purpose for which the context is intended. The @@ -150,17 +159,6 @@ The fs_context fields are as follows: FS_CONTEXT_FOR_SUBMOUNT -- New automatic submount of extant mount FS_CONTEXT_FOR_RECONFIGURE -- Change an existing mount - (*) bool sloppy - (*) bool silent - - These are set if the sloppy or silent mount options are given. - - [NOTE] sloppy is probably unnecessary when userspace passes over one - option at a time since the error can just be ignored if userspace deems it - to be unimportant. - - [NOTE] silent is probably redundant with sb_flags & SB_SILENT. - The mount context is created by calling vfs_new_fs_context() or vfs_dup_fs_context() and is destroyed with put_fs_context(). Note that the structure is not refcounted. @@ -342,28 +340,47 @@ number of operations used by the new mount code for this purpose: It should return 0 on success or a negative error code on failure. -================================= -VFS FILESYSTEM CONTEXT OPERATIONS -================================= +========================== +VFS FILESYSTEM CONTEXT API +========================== -There are four operations for creating a filesystem context and -one for destroying a context: +There are four operations for creating a filesystem context and one for +destroying a context: - (*) struct fs_context *vfs_new_fs_context(struct file_system_type *fs_type, - struct dentry *reference, - unsigned int sb_flags, - unsigned int sb_flags_mask, - enum fs_context_purpose purpose); + (*) struct fs_context *fs_context_for_mount( + struct file_system_type *fs_type, + unsigned int sb_flags); - Create a filesystem context for a given filesystem type and purpose. This - allocates the filesystem context, sets the superblock flags, initialises - the security and calls fs_type->init_fs_context() to initialise the - filesystem private data. + Allocate a filesystem context for the purpose of setting up a new mount, + whether that be with a new superblock or sharing an existing one. This + sets the superblock flags, initialises the security and calls + fs_type->init_fs_context() to initialise the filesystem private data. - reference can be NULL or it may indicate the root dentry of a superblock - that is going to be reconfigured (FS_CONTEXT_FOR_RECONFIGURE) or - the automount point that triggered a submount (FS_CONTEXT_FOR_SUBMOUNT). - This is provided as a source of namespace information. + fs_type specifies the filesystem type that will manage the context and + sb_flags presets the superblock flags stored therein. + + (*) struct fs_context *fs_context_for_reconfigure( + struct dentry *dentry, + unsigned int sb_flags, + unsigned int sb_flags_mask); + + Allocate a filesystem context for the purpose of reconfiguring an + existing superblock. dentry provides a reference to the superblock to be + configured. sb_flags and sb_flags_mask indicate which superblock flags + need changing and to what. + + (*) struct fs_context *fs_context_for_submount( + struct file_system_type *fs_type, + struct dentry *reference); + + Allocate a filesystem context for the purpose of creating a new mount for + an automount point or other derived superblock. fs_type specifies the + filesystem type that will manage the context and the reference dentry + supplies the parameters. Namespaces are propagated from the reference + dentry's superblock also. + + Note that it's not a requirement that the reference dentry be of the same + filesystem type as fs_type. (*) struct fs_context *vfs_dup_fs_context(struct fs_context *src_fc); @@ -390,20 +407,6 @@ context pointer or a negative error code. For the remaining operations, if an error occurs, a negative error code will be returned. - (*) int vfs_get_tree(struct fs_context *fc); - - Get or create the mountable root and superblock, using the parameters in - the filesystem context to select/configure the superblock. This invokes - the ->validate() op and then the ->get_tree() op. - - [NOTE] ->validate() could perhaps be rolled into ->get_tree() and - ->reconfigure(). - - (*) struct vfsmount *vfs_create_mount(struct fs_context *fc); - - Create a mount given the parameters in the specified filesystem context. - Note that this does not attach the mount to anything. - (*) int vfs_parse_fs_param(struct fs_context *fc, struct fs_parameter *param); @@ -432,17 +435,80 @@ returned. clear the pointer, but then becomes responsible for disposing of the object. - (*) int vfs_parse_fs_string(struct fs_context *fc, char *key, + (*) int vfs_parse_fs_string(struct fs_context *fc, const char *key, const char *value, size_t v_size); - A wrapper around vfs_parse_fs_param() that just passes a constant string. + A wrapper around vfs_parse_fs_param() that copies the value string it is + passed. (*) int generic_parse_monolithic(struct fs_context *fc, void *data); Parse a sys_mount() data page, assuming the form to be a text list consisting of key[=val] options separated by commas. Each item in the list is passed to vfs_mount_option(). This is the default when the - ->parse_monolithic() operation is NULL. + ->parse_monolithic() method is NULL. + + (*) int vfs_get_tree(struct fs_context *fc); + + Get or create the mountable root and superblock, using the parameters in + the filesystem context to select/configure the superblock. This invokes + the ->get_tree() method. + + (*) struct vfsmount *vfs_create_mount(struct fs_context *fc); + + Create a mount given the parameters in the specified filesystem context. + Note that this does not attach the mount to anything. + + +=========================== +SUPERBLOCK CREATION HELPERS +=========================== + +A number of VFS helpers are available for use by filesystems for the creation +or looking up of superblocks. + + (*) struct super_block * + sget_fc(struct fs_context *fc, + int (*test)(struct super_block *sb, struct fs_context *fc), + int (*set)(struct super_block *sb, struct fs_context *fc)); + + This is the core routine. If test is non-NULL, it searches for an + existing superblock matching the criteria held in the fs_context, using + the test function to match them. If no match is found, a new superblock + is created and the set function is called to set it up. + + Prior to the set function being called, fc->s_fs_info will be transferred + to sb->s_fs_info - and fc->s_fs_info will be cleared if set returns + success (ie. 0). + +The following helpers all wrap sget_fc(): + + (*) int vfs_get_super(struct fs_context *fc, + enum vfs_get_super_keying keying, + int (*fill_super)(struct super_block *sb, + struct fs_context *fc)) + + This creates/looks up a deviceless superblock. The keying indicates how + many superblocks of this type may exist and in what manner they may be + shared: + + (1) vfs_get_single_super + + Only one such superblock may exist in the system. Any further + attempt to get a new superblock gets this one (and any parameter + differences are ignored). + + (2) vfs_get_keyed_super + + Multiple superblocks of this type may exist and they're keyed on + their s_fs_info pointer (for example this may refer to a + namespace). + + (3) vfs_get_independent_super + + Multiple independent superblocks of this type may exist. This + function never matches an existing one and always creates a new + one. ===================== @@ -454,35 +520,22 @@ There's a core description struct that links everything together: struct fs_parameter_description { const char name[16]; - u8 nr_params; - u8 nr_alt_keys; - u8 nr_enums; - bool ignore_unknown; - bool no_source; - const char *const *keys; - const struct constant_table *alt_keys; const struct fs_parameter_spec *specs; const struct fs_parameter_enum *enums; }; For example: - enum afs_param { + enum { Opt_autocell, Opt_bar, Opt_dyn, Opt_foo, Opt_source, - nr__afs_params }; static const struct fs_parameter_description afs_fs_parameters = { .name = "kAFS", - .nr_params = nr__afs_params, - .nr_alt_keys = ARRAY_SIZE(afs_param_alt_keys), - .nr_enums = ARRAY_SIZE(afs_param_enums), - .keys = afs_param_keys, - .alt_keys = afs_param_alt_keys, .specs = afs_param_specs, .enums = afs_param_enums, }; @@ -494,28 +547,24 @@ The members are as follows: The name to be used in error messages generated by the parse helper functions. - (2) u8 nr_params; + (2) const struct fs_parameter_specification *specs; - The number of discrete parameter identifiers. This indicates the number - of elements in the ->types[] array and also limits the values that may be - used in the values that the ->keys[] array maps to. + Table of parameter specifications, terminated with a null entry, where the + entries are of type: - It is expected that, for example, two parameters that are related, say - "acl" and "noacl" with have the same ID, but will be flagged to indicate - that one is the inverse of the other. The value can then be picked out - from the parse result. - - (3) const struct fs_parameter_specification *specs; - - Table of parameter specifications, where the entries are of type: - - struct fs_parameter_type { - enum fs_parameter_spec type:8; - u8 flags; + struct fs_parameter_spec { + const char *name; + u8 opt; + enum fs_parameter_type type:8; + unsigned short flags; }; - and the parameter identifier is the index to the array. 'type' indicates - the desired value type and must be one of: + The 'name' field is a string to match exactly to the parameter key (no + wildcards, patterns and no case-independence) and 'opt' is the value that + will be returned by the fs_parser() function in the case of a successful + match. + + The 'type' field indicates the desired value type and must be one of: TYPE NAME EXPECTED VALUE RESULT IN ======================= ======================= ===================== @@ -525,85 +574,65 @@ The members are as follows: fs_param_is_u32_octal 32-bit octal int result->uint_32 fs_param_is_u32_hex 32-bit hex int result->uint_32 fs_param_is_s32 32-bit signed int result->int_32 + fs_param_is_u64 64-bit unsigned int result->uint_64 fs_param_is_enum Enum value name result->uint_32 fs_param_is_string Arbitrary string param->string fs_param_is_blob Binary blob param->blob fs_param_is_blockdev Blockdev path * Needs lookup fs_param_is_path Path * Needs lookup - fs_param_is_fd File descriptor param->file - - And each parameter can be qualified with 'flags': - - fs_param_v_optional The value is optional - fs_param_neg_with_no If key name is prefixed with "no", it is false - fs_param_neg_with_empty If value is "", it is false - fs_param_deprecated The parameter is deprecated. - - For example: - - static const struct fs_parameter_spec afs_param_specs[nr__afs_params] = { - [Opt_autocell] = { fs_param_is flag }, - [Opt_bar] = { fs_param_is_enum }, - [Opt_dyn] = { fs_param_is flag }, - [Opt_foo] = { fs_param_is_bool, fs_param_neg_with_no }, - [Opt_source] = { fs_param_is_string }, - }; + fs_param_is_fd File descriptor result->int_32 Note that if the value is of fs_param_is_bool type, fs_parse() will try to match any string value against "0", "1", "no", "yes", "false", "true". - [!] NOTE that the table must be sorted according to primary key name so - that ->keys[] is also sorted. + Each parameter can also be qualified with 'flags': - (4) const char *const *keys; + fs_param_v_optional The value is optional + fs_param_neg_with_no result->negated set if key is prefixed with "no" + fs_param_neg_with_empty result->negated set if value is "" + fs_param_deprecated The parameter is deprecated. - Table of primary key names for the parameters. There must be one entry - per defined parameter. The table is optional if ->nr_params is 0. The - table is just an array of names e.g.: + These are wrapped with a number of convenience wrappers: - static const char *const afs_param_keys[nr__afs_params] = { - [Opt_autocell] = "autocell", - [Opt_bar] = "bar", - [Opt_dyn] = "dyn", - [Opt_foo] = "foo", - [Opt_source] = "source", + MACRO SPECIFIES + ======================= =============================================== + fsparam_flag() fs_param_is_flag + fsparam_flag_no() fs_param_is_flag, fs_param_neg_with_no + fsparam_bool() fs_param_is_bool + fsparam_u32() fs_param_is_u32 + fsparam_u32oct() fs_param_is_u32_octal + fsparam_u32hex() fs_param_is_u32_hex + fsparam_s32() fs_param_is_s32 + fsparam_u64() fs_param_is_u64 + fsparam_enum() fs_param_is_enum + fsparam_string() fs_param_is_string + fsparam_blob() fs_param_is_blob + fsparam_bdev() fs_param_is_blockdev + fsparam_path() fs_param_is_path + fsparam_fd() fs_param_is_fd + + all of which take two arguments, name string and option number - for + example: + + static const struct fs_parameter_spec afs_param_specs[] = { + fsparam_flag ("autocell", Opt_autocell), + fsparam_flag ("dyn", Opt_dyn), + fsparam_string ("source", Opt_source), + fsparam_flag_no ("foo", Opt_foo), + {} }; - [!] NOTE that the table must be sorted such that the table can be searched - with bsearch() using strcmp(). This means that the Opt_* values must - correspond to the entries in this table. - - (5) const struct constant_table *alt_keys; - u8 nr_alt_keys; - - Table of additional key names and their mappings to parameter ID plus the - number of elements in the table. This is optional. The table is just an - array of { name, integer } pairs, e.g.: - - static const struct constant_table afs_param_keys[] = { - { "baz", Opt_bar }, - { "dynamic", Opt_dyn }, - }; - - [!] NOTE that the table must be sorted such that strcmp() can be used with - bsearch() to search the entries. - - The parameter ID can also be fs_param_key_removed to indicate that a - deprecated parameter has been removed and that an error will be given. - This differs from fs_param_deprecated where the parameter may still have - an effect. - - Further, the behaviour of the parameter may differ when an alternate name - is used (for instance with NFS, "v3", "v4.2", etc. are alternate names). + An addition macro, __fsparam() is provided that takes an additional pair + of arguments to specify the type and the flags for anything that doesn't + match one of the above macros. (6) const struct fs_parameter_enum *enums; - u8 nr_enums; - Table of enum value names to integer mappings and the number of elements - stored therein. This is of type: + Table of enum value names to integer mappings, terminated with a null + entry. This is of type: struct fs_parameter_enum { - u8 param_id; + u8 opt; char name[14]; u8 value; }; @@ -621,11 +650,6 @@ The members are as follows: try to look the value up in the enum table and the result will be stored in the parse result. - (7) bool no_source; - - If this is set, fs_parse() will ignore any "source" parameter and not - pass it to the filesystem. - The parser should be pointed to by the parser pointer in the file_system_type struct as this will provide validation on registration (if CONFIG_VALIDATE_FS_PARSER=y) and will allow the description to be queried from @@ -650,9 +674,8 @@ process the parameters it is given. int value; }; - and it must be sorted such that it can be searched using bsearch() using - strcmp(). If a match is found, the corresponding value is returned. If a - match isn't found, the not_found value is returned instead. + If a match is found, the corresponding value is returned. If a match + isn't found, the not_found value is returned instead. (*) bool validate_constant_table(const struct constant_table *tbl, size_t tbl_size, @@ -665,36 +688,36 @@ process the parameters it is given. should just be set to lie inside the low-to-high range. If all is good, true is returned. If the table is invalid, errors are - logged to dmesg, the stack is dumped and false is returned. + logged to dmesg and false is returned. + + (*) bool fs_validate_description(const struct fs_parameter_description *desc); + + This performs some validation checks on a parameter description. It + returns true if the description is good and false if it is not. It will + log errors to dmesg if validation fails. (*) int fs_parse(struct fs_context *fc, - const struct fs_param_parser *parser, + const struct fs_parameter_description *desc, struct fs_parameter *param, - struct fs_param_parse_result *result); + struct fs_parse_result *result); This is the main interpreter of parameters. It uses the parameter - description (parser) to look up the name of the parameter to use and to - convert that to a parameter ID (stored in result->key). + description to look up a parameter by key name and to convert that to an + option number (which it returns). If successful, and if the parameter type indicates the result is a boolean, integer or enum type, the value is converted by this function and - the result stored in result->{boolean,int_32,uint_32}. + the result stored in result->{boolean,int_32,uint_32,uint_64}. If a match isn't initially made, the key is prefixed with "no" and no value is present then an attempt will be made to look up the key with the prefix removed. If this matches a parameter for which the type has flag - fs_param_neg_with_no set, then a match will be made and the value will be - set to false/0/NULL. + fs_param_neg_with_no set, then a match will be made and result->negated + will be set to true. - If the parameter is successfully matched and, optionally, parsed - correctly, 1 is returned. If the parameter isn't matched and - parser->ignore_unknown is set, then 0 is returned. Otherwise -EINVAL is - returned. - - (*) bool fs_validate_description(const struct fs_parameter_description *desc); - - This is validates the parameter description. It returns true if the - description is good and false if it is not. + If the parameter isn't matched, -ENOPARAM will be returned; if the + parameter is matched, but the value is erroneous, -EINVAL will be + returned; otherwise the parameter's option number will be returned. (*) int fs_lookup_param(struct fs_context *fc, struct fs_parameter *value, From 8c7ae38d1ce12a0eaeba655df8562552b3596c7f Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 Mar 2019 22:48:02 +0000 Subject: [PATCH 26/39] afs: Fix StoreData op marshalling The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls generated by ->setattr() ops for the purpose of expanding a file is incorrect due to older documentation incorrectly describing the way the RPC 'FileLength' parameter is meant to work. The older documentation says that this is the length the file is meant to end up at the end of the operation; however, it was never implemented this way in any of the servers, but rather the file is truncated down to this before the write operation is effected, and never expanded to it (and, indeed, it was renamed to 'TruncPos' in 2014). Fix this by setting the position parameter to the new file length and doing a zero-lengh write there. The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file it then mmaps. This can be tested by giving the following test program a filename in an AFS directory: #include #include #include #include #include int main(int argc, char *argv[]) { char *p; int fd; if (argc != 2) { fprintf(stderr, "Format: test-trunc-mmap \n"); exit(2); } fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC); if (fd < 0) { perror(argv[1]); exit(1); } if (ftruncate(fd, 0x140008) == -1) { perror("ftruncate"); exit(1); } p = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } p[0] = 'a'; if (munmap(p, 4096) < 0) { perror("munmap"); exit(1); } if (close(fd) < 0) { perror("close"); exit(1); } exit(0); } Fixes: 31143d5d515e ("AFS: implement basic file write support") Reported-by: Jonathan Billings Tested-by: Jonathan Billings Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/afs/fsclient.c | 6 +++--- fs/afs/yfsclient.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c index ca08c83168f5..0b37867b5c20 100644 --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -1515,8 +1515,8 @@ static int afs_fs_setattr_size64(struct afs_fs_cursor *fc, struct iattr *attr) xdr_encode_AFS_StoreStatus(&bp, attr); - *bp++ = 0; /* position of start of write */ - *bp++ = 0; + *bp++ = htonl(attr->ia_size >> 32); /* position of start of write */ + *bp++ = htonl((u32) attr->ia_size); *bp++ = 0; /* size of write */ *bp++ = 0; *bp++ = htonl(attr->ia_size >> 32); /* new file length */ @@ -1564,7 +1564,7 @@ static int afs_fs_setattr_size(struct afs_fs_cursor *fc, struct iattr *attr) xdr_encode_AFS_StoreStatus(&bp, attr); - *bp++ = 0; /* position of start of write */ + *bp++ = htonl(attr->ia_size); /* position of start of write */ *bp++ = 0; /* size of write */ *bp++ = htonl(attr->ia_size); /* new file length */ diff --git a/fs/afs/yfsclient.c b/fs/afs/yfsclient.c index 5aa57929e8c2..6e97a42d24d1 100644 --- a/fs/afs/yfsclient.c +++ b/fs/afs/yfsclient.c @@ -1514,7 +1514,7 @@ static int yfs_fs_setattr_size(struct afs_fs_cursor *fc, struct iattr *attr) bp = xdr_encode_u32(bp, 0); /* RPC flags */ bp = xdr_encode_YFSFid(bp, &vnode->fid); bp = xdr_encode_YFS_StoreStatus(bp, attr); - bp = xdr_encode_u64(bp, 0); /* position of start of write */ + bp = xdr_encode_u64(bp, attr->ia_size); /* position of start of write */ bp = xdr_encode_u64(bp, 0); /* size of write */ bp = xdr_encode_u64(bp, attr->ia_size); /* new file length */ yfs_check_req(call, bp); From c8fa7a807f3c5f946bd92076fbaf7826edb650dc Mon Sep 17 00:00:00 2001 From: Solomon Tan Date: Fri, 22 Mar 2019 13:22:55 +0800 Subject: [PATCH 27/39] perf cs-etm: Add missing case value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following error was thrown when compiling `tools/perf` using OpenCSD v0.11.1. This patch fixes said error. CC util/intel-pt-decoder/intel-pt-log.o CC util/cs-etm-decoder/cs-etm-decoder.o util/cs-etm-decoder/cs-etm-decoder.c: In function ‘cs_etm_decoder__buffer_range’: util/cs-etm-decoder/cs-etm-decoder.c:370:2: error: enumeration value ‘OCSD_INSTR_WFI_WFE’ not handled in switch [-Werror=switch-enum] switch (elem->last_i_type) { ^~~~~~ CC util/intel-pt-decoder/intel-pt-decoder.o cc1: all warnings being treated as errors Because `OCSD_INSTR_WFI_WFE` case was added only in v0.11.0, the minimum required OpenCSD library version for this patch is no longer v0.10.0. Signed-off-by: Solomon Tan Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mathieu Poirier Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Robert Walker Cc: Suzuki K Poulouse Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20190322052255.GA4809@w-OptiPlex-7050 Signed-off-by: Arnaldo Carvalho de Melo --- tools/build/feature/test-libopencsd.c | 4 ++-- tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/build/feature/test-libopencsd.c b/tools/build/feature/test-libopencsd.c index d68eb4fb40cc..2b0e02c38870 100644 --- a/tools/build/feature/test-libopencsd.c +++ b/tools/build/feature/test-libopencsd.c @@ -4,9 +4,9 @@ /* * Check OpenCSD library version is sufficient to provide required features */ -#define OCSD_MIN_VER ((0 << 16) | (10 << 8) | (0)) +#define OCSD_MIN_VER ((0 << 16) | (11 << 8) | (0)) #if !defined(OCSD_VER_NUM) || (OCSD_VER_NUM < OCSD_MIN_VER) -#error "OpenCSD >= 0.10.0 is required" +#error "OpenCSD >= 0.11.0 is required" #endif int main(void) diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c index ba4c623cd8de..39fe21e1cf93 100644 --- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c @@ -387,6 +387,7 @@ cs_etm_decoder__buffer_range(struct cs_etm_decoder *decoder, break; case OCSD_INSTR_ISB: case OCSD_INSTR_DSB_DMB: + case OCSD_INSTR_WFI_WFE: case OCSD_INSTR_OTHER: default: packet->last_instr_taken_branch = false; From f3b4e06b3bda759afd042d3d5fa86bea8f1fe278 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 25 Mar 2019 15:51:35 +0200 Subject: [PATCH 28/39] perf intel-pt: Fix TSC slip A TSC packet can slip past MTC packets so that the timestamp appears to go backwards. One estimate is that can be up to about 40 CPU cycles, which is certainly less than 0x1000 TSC ticks, but accept slippage an order of magnitude more to be on the safe side. Signed-off-by: Adrian Hunter Cc: Jiri Olsa Cc: stable@vger.kernel.org Fixes: 79b58424b821c ("perf tools: Add Intel PT support for decoding MTC packets") Link: http://lkml.kernel.org/r/20190325135135.18348-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- .../util/intel-pt-decoder/intel-pt-decoder.c | 20 ++++++++----------- 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c index 6e03db142091..872fab163585 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c @@ -251,19 +251,15 @@ struct intel_pt_decoder *intel_pt_decoder_new(struct intel_pt_params *params) if (!(decoder->tsc_ctc_ratio_n % decoder->tsc_ctc_ratio_d)) decoder->tsc_ctc_mult = decoder->tsc_ctc_ratio_n / decoder->tsc_ctc_ratio_d; - - /* - * Allow for timestamps appearing to backwards because a TSC - * packet has slipped past a MTC packet, so allow 2 MTC ticks - * or ... - */ - decoder->tsc_slip = multdiv(2 << decoder->mtc_shift, - decoder->tsc_ctc_ratio_n, - decoder->tsc_ctc_ratio_d); } - /* ... or 0x100 paranoia */ - if (decoder->tsc_slip < 0x100) - decoder->tsc_slip = 0x100; + + /* + * A TSC packet can slip past MTC packets so that the timestamp appears + * to go backwards. One estimate is that can be up to about 40 CPU + * cycles, which is certainly less than 0x1000 TSC ticks, but accept + * slippage an order of magnitude more to be on the safe side. + */ + decoder->tsc_slip = 0x10000; intel_pt_log("timestamp: mtc_shift %u\n", decoder->mtc_shift); intel_pt_log("timestamp: tsc_ctc_ratio_n %u\n", decoder->tsc_ctc_ratio_n); From 4e8a5c1551370ebc0fbdb8f5c33dad13e45bdc99 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Thu, 14 Mar 2019 15:00:10 +0100 Subject: [PATCH 29/39] perf evsel: Fix max perf_event_attr.precise_ip detection After a discussion with Andi, move the perf_event_attr.precise_ip detection for maximum precise config (via :P modifier or for default cycles event) to perf_evsel__open(). The current detection in perf_event_attr__set_max_precise_ip() is tricky, because precise_ip config is specific for given event and it currently checks only hw cycles. We now check for valid precise_ip value right after failing sys_perf_event_open() for specific event, before any of the perf_event_attr fallback code gets executed. This way we get the proper config in perf_event_attr together with allowed precise_ip settings. We can see that code activity with -vv, like: $ perf record -vv ls ... ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 ... precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 ------------------------------------------------------------ sys_perf_event_open: pid 9926 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -95 decreasing precise_ip by one (2) ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 ... precise_ip 2 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 ------------------------------------------------------------ sys_perf_event_open: pid 9926 cpu 0 group_fd -1 flags 0x8 = 4 ... Suggested-by: Andi Kleen Signed-off-by: Jiri Olsa Link: http://lkml.kernel.org/n/tip-dkvxxbeg7lu74155d4jhlmc9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/evlist.c | 29 ---------------- tools/perf/util/evlist.h | 2 -- tools/perf/util/evsel.c | 72 ++++++++++++++++++++++++++++++++-------- 3 files changed, 59 insertions(+), 44 deletions(-) diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index ec78e93085de..6689378ee577 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -231,35 +231,6 @@ void perf_evlist__set_leader(struct perf_evlist *evlist) } } -void perf_event_attr__set_max_precise_ip(struct perf_event_attr *pattr) -{ - struct perf_event_attr attr = { - .type = PERF_TYPE_HARDWARE, - .config = PERF_COUNT_HW_CPU_CYCLES, - .exclude_kernel = 1, - .precise_ip = 3, - }; - - event_attr_init(&attr); - - /* - * Unnamed union member, not supported as struct member named - * initializer in older compilers such as gcc 4.4.7 - */ - attr.sample_period = 1; - - while (attr.precise_ip != 0) { - int fd = sys_perf_event_open(&attr, 0, -1, -1, 0); - if (fd != -1) { - close(fd); - break; - } - --attr.precise_ip; - } - - pattr->precise_ip = attr.precise_ip; -} - int __perf_evlist__add_default(struct perf_evlist *evlist, bool precise) { struct perf_evsel *evsel = perf_evsel__new_cycles(precise); diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index dcb68f34d2cd..6a94785b9100 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -315,8 +315,6 @@ void perf_evlist__to_front(struct perf_evlist *evlist, void perf_evlist__set_tracking_event(struct perf_evlist *evlist, struct perf_evsel *tracking_evsel); -void perf_event_attr__set_max_precise_ip(struct perf_event_attr *attr); - struct perf_evsel * perf_evlist__find_evsel_by_str(struct perf_evlist *evlist, const char *str); diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index 7835e05f0c0a..66d066f18b5b 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -295,7 +295,6 @@ struct perf_evsel *perf_evsel__new_cycles(bool precise) if (!precise) goto new_event; - perf_event_attr__set_max_precise_ip(&attr); /* * Now let the usual logic to set up the perf_event_attr defaults * to kick in when we return and before perf_evsel__open() is called. @@ -305,6 +304,8 @@ new_event: if (evsel == NULL) goto out; + evsel->precise_max = true; + /* use asprintf() because free(evsel) assumes name is allocated */ if (asprintf(&evsel->name, "cycles%s%s%.*s", (attr.precise_ip || attr.exclude_kernel) ? ":" : "", @@ -1083,7 +1084,7 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts, } if (evsel->precise_max) - perf_event_attr__set_max_precise_ip(attr); + attr->precise_ip = 3; if (opts->all_user) { attr->exclude_kernel = 1; @@ -1749,6 +1750,59 @@ static bool ignore_missing_thread(struct perf_evsel *evsel, return true; } +static void display_attr(struct perf_event_attr *attr) +{ + if (verbose >= 2) { + fprintf(stderr, "%.60s\n", graph_dotted_line); + fprintf(stderr, "perf_event_attr:\n"); + perf_event_attr__fprintf(stderr, attr, __open_attr__fprintf, NULL); + fprintf(stderr, "%.60s\n", graph_dotted_line); + } +} + +static int perf_event_open(struct perf_evsel *evsel, + pid_t pid, int cpu, int group_fd, + unsigned long flags) +{ + int precise_ip = evsel->attr.precise_ip; + int fd; + + while (1) { + pr_debug2("sys_perf_event_open: pid %d cpu %d group_fd %d flags %#lx", + pid, cpu, group_fd, flags); + + fd = sys_perf_event_open(&evsel->attr, pid, cpu, group_fd, flags); + if (fd >= 0) + break; + + /* + * Do quick precise_ip fallback if: + * - there is precise_ip set in perf_event_attr + * - maximum precise is requested + * - sys_perf_event_open failed with ENOTSUP error, + * which is associated with wrong precise_ip + */ + if (!precise_ip || !evsel->precise_max || (errno != ENOTSUP)) + break; + + /* + * We tried all the precise_ip values, and it's + * still failing, so leave it to standard fallback. + */ + if (!evsel->attr.precise_ip) { + evsel->attr.precise_ip = precise_ip; + break; + } + + pr_debug2("\nsys_perf_event_open failed, error %d\n", -ENOTSUP); + evsel->attr.precise_ip--; + pr_debug2("decreasing precise_ip by one (%d)\n", evsel->attr.precise_ip); + display_attr(&evsel->attr); + } + + return fd; +} + int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus, struct thread_map *threads) { @@ -1824,12 +1878,7 @@ retry_sample_id: if (perf_missing_features.sample_id_all) evsel->attr.sample_id_all = 0; - if (verbose >= 2) { - fprintf(stderr, "%.60s\n", graph_dotted_line); - fprintf(stderr, "perf_event_attr:\n"); - perf_event_attr__fprintf(stderr, &evsel->attr, __open_attr__fprintf, NULL); - fprintf(stderr, "%.60s\n", graph_dotted_line); - } + display_attr(&evsel->attr); for (cpu = 0; cpu < cpus->nr; cpu++) { @@ -1841,13 +1890,10 @@ retry_sample_id: group_fd = get_group_fd(evsel, cpu, thread); retry_open: - pr_debug2("sys_perf_event_open: pid %d cpu %d group_fd %d flags %#lx", - pid, cpus->map[cpu], group_fd, flags); - test_attr__ready(); - fd = sys_perf_event_open(&evsel->attr, pid, cpus->map[cpu], - group_fd, flags); + fd = perf_event_open(evsel, pid, cpus->map[cpu], + group_fd, flags); FD(evsel, cpu, thread) = fd; From be709d48329a500621d2a05835283150ae137b45 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 25 Mar 2019 14:06:07 -0300 Subject: [PATCH 30/39] tools headers uapi: Sync asm-generic/mman-common.h and linux/mman.h To deal with the move of some defines from asm-generic/mmap-common.h to linux/mman.h done in: 746c9398f5ac ("arch: move common mmap flags to linux/mman.h") The generated mmap_flags array stays the same: $ tools/perf/trace/beauty/mmap_flags.sh static const char *mmap_flags[] = { [ilog2(0x40) + 1] = "32BIT", [ilog2(0x01) + 1] = "SHARED", [ilog2(0x02) + 1] = "PRIVATE", [ilog2(0x10) + 1] = "FIXED", [ilog2(0x20) + 1] = "ANONYMOUS", [ilog2(0x100000) + 1] = "FIXED_NOREPLACE", [ilog2(0x0100) + 1] = "GROWSDOWN", [ilog2(0x0800) + 1] = "DENYWRITE", [ilog2(0x1000) + 1] = "EXECUTABLE", [ilog2(0x2000) + 1] = "LOCKED", [ilog2(0x4000) + 1] = "NORESERVE", [ilog2(0x8000) + 1] = "POPULATE", [ilog2(0x10000) + 1] = "NONBLOCK", [ilog2(0x20000) + 1] = "STACK", [ilog2(0x40000) + 1] = "HUGETLB", [ilog2(0x80000) + 1] = "SYNC", }; $ And to have the system's sys/mman.h find the definition of MAP_SHARED and MAP_PRIVATE, make sure they are defined in the tools/ mman-common.h in a way that keeps it the same as the kernel's, need for keeping the Android's NDK cross build working. This silences these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h' diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h' diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h Cc: Adrian Hunter Cc: Arnd Bergmann Cc: Jiri Olsa Cc: Michael S. Tsirkin Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-h80ycpc6pedg9s5z2rwpy6ws@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/alpha/include/uapi/asm/mman.h | 2 -- tools/arch/mips/include/uapi/asm/mman.h | 2 -- tools/arch/parisc/include/uapi/asm/mman.h | 2 -- tools/arch/xtensa/include/uapi/asm/mman.h | 2 -- .../uapi/asm-generic/mman-common-tools.h | 23 +++++++++++++++++++ tools/include/uapi/asm-generic/mman-common.h | 4 +--- tools/include/uapi/asm-generic/mman.h | 2 +- tools/include/uapi/linux/mman.h | 4 ++++ tools/perf/Makefile.perf | 4 ++-- tools/perf/check-headers.sh | 2 +- tools/perf/trace/beauty/mmap_flags.sh | 14 ++++++++--- 11 files changed, 43 insertions(+), 18 deletions(-) create mode 100644 tools/include/uapi/asm-generic/mman-common-tools.h diff --git a/tools/arch/alpha/include/uapi/asm/mman.h b/tools/arch/alpha/include/uapi/asm/mman.h index c317d3e6867a..ea6a255ae61f 100644 --- a/tools/arch/alpha/include/uapi/asm/mman.h +++ b/tools/arch/alpha/include/uapi/asm/mman.h @@ -27,8 +27,6 @@ #define MAP_NONBLOCK 0x40000 #define MAP_NORESERVE 0x10000 #define MAP_POPULATE 0x20000 -#define MAP_PRIVATE 0x02 -#define MAP_SHARED 0x01 #define MAP_STACK 0x80000 #define PROT_EXEC 0x4 #define PROT_GROWSDOWN 0x01000000 diff --git a/tools/arch/mips/include/uapi/asm/mman.h b/tools/arch/mips/include/uapi/asm/mman.h index de2206883abc..c8acaa138d46 100644 --- a/tools/arch/mips/include/uapi/asm/mman.h +++ b/tools/arch/mips/include/uapi/asm/mman.h @@ -28,8 +28,6 @@ #define MAP_NONBLOCK 0x20000 #define MAP_NORESERVE 0x0400 #define MAP_POPULATE 0x10000 -#define MAP_PRIVATE 0x002 -#define MAP_SHARED 0x001 #define MAP_STACK 0x40000 #define PROT_EXEC 0x04 #define PROT_GROWSDOWN 0x01000000 diff --git a/tools/arch/parisc/include/uapi/asm/mman.h b/tools/arch/parisc/include/uapi/asm/mman.h index 1bd78758bde9..f9fd1325f5bd 100644 --- a/tools/arch/parisc/include/uapi/asm/mman.h +++ b/tools/arch/parisc/include/uapi/asm/mman.h @@ -27,8 +27,6 @@ #define MAP_NONBLOCK 0x20000 #define MAP_NORESERVE 0x4000 #define MAP_POPULATE 0x10000 -#define MAP_PRIVATE 0x02 -#define MAP_SHARED 0x01 #define MAP_STACK 0x40000 #define PROT_EXEC 0x4 #define PROT_GROWSDOWN 0x01000000 diff --git a/tools/arch/xtensa/include/uapi/asm/mman.h b/tools/arch/xtensa/include/uapi/asm/mman.h index 34dde6f44dae..f2b08c990afc 100644 --- a/tools/arch/xtensa/include/uapi/asm/mman.h +++ b/tools/arch/xtensa/include/uapi/asm/mman.h @@ -27,8 +27,6 @@ #define MAP_NONBLOCK 0x20000 #define MAP_NORESERVE 0x0400 #define MAP_POPULATE 0x10000 -#define MAP_PRIVATE 0x002 -#define MAP_SHARED 0x001 #define MAP_STACK 0x40000 #define PROT_EXEC 0x4 #define PROT_GROWSDOWN 0x01000000 diff --git a/tools/include/uapi/asm-generic/mman-common-tools.h b/tools/include/uapi/asm-generic/mman-common-tools.h new file mode 100644 index 000000000000..af7d0d3a3182 --- /dev/null +++ b/tools/include/uapi/asm-generic/mman-common-tools.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __ASM_GENERIC_MMAN_COMMON_TOOLS_ONLY_H +#define __ASM_GENERIC_MMAN_COMMON_TOOLS_ONLY_H + +#include + +/* We need this because we need to have tools/include/uapi/ included in the tools + * header search path to get access to stuff that is not yet in the system's + * copy of the files in that directory, but since this cset: + * + * 746c9398f5ac ("arch: move common mmap flags to linux/mman.h") + * + * We end up making sys/mman.h, that is in the system headers, to not find the + * MAP_SHARED and MAP_PRIVATE defines because they are not anymore in our copy + * of asm-generic/mman-common.h. So we define them here and include this header + * from each of the per arch mman.h headers. + */ +#ifndef MAP_SHARED +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_SHARED_VALIDATE 0x03 /* share + validate extension flags */ +#endif +#endif // __ASM_GENERIC_MMAN_COMMON_TOOLS_ONLY_H diff --git a/tools/include/uapi/asm-generic/mman-common.h b/tools/include/uapi/asm-generic/mman-common.h index e7ee32861d51..abd238d0f7a4 100644 --- a/tools/include/uapi/asm-generic/mman-common.h +++ b/tools/include/uapi/asm-generic/mman-common.h @@ -15,9 +15,7 @@ #define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ #define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ -#define MAP_SHARED 0x01 /* Share changes */ -#define MAP_PRIVATE 0x02 /* Changes are private */ -#define MAP_SHARED_VALIDATE 0x03 /* share + validate extension flags */ +/* 0x01 - 0x03 are defined in linux/mman.h */ #define MAP_TYPE 0x0f /* Mask for type of mapping */ #define MAP_FIXED 0x10 /* Interpret addr exactly */ #define MAP_ANONYMOUS 0x20 /* don't use a file */ diff --git a/tools/include/uapi/asm-generic/mman.h b/tools/include/uapi/asm-generic/mman.h index 653687d9771b..36c197fc44a0 100644 --- a/tools/include/uapi/asm-generic/mman.h +++ b/tools/include/uapi/asm-generic/mman.h @@ -2,7 +2,7 @@ #ifndef __ASM_GENERIC_MMAN_H #define __ASM_GENERIC_MMAN_H -#include +#include #define MAP_GROWSDOWN 0x0100 /* stack-like segment */ #define MAP_DENYWRITE 0x0800 /* ETXTBSY */ diff --git a/tools/include/uapi/linux/mman.h b/tools/include/uapi/linux/mman.h index d0f515d53299..fc1a64c3447b 100644 --- a/tools/include/uapi/linux/mman.h +++ b/tools/include/uapi/linux/mman.h @@ -12,6 +12,10 @@ #define OVERCOMMIT_ALWAYS 1 #define OVERCOMMIT_NEVER 2 +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_SHARED_VALIDATE 0x03 /* share + validate extension flags */ + /* * Huge page size encoding when MAP_HUGETLB is specified, and a huge page * size other than the default is desired. See hugetlb_encode.h. diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index 01f7555fd933..e8c9f77e9010 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -481,8 +481,8 @@ $(madvise_behavior_array): $(madvise_hdr_dir)/mman-common.h $(madvise_behavior_t mmap_flags_array := $(beauty_outdir)/mmap_flags_array.c mmap_flags_tbl := $(srctree)/tools/perf/trace/beauty/mmap_flags.sh -$(mmap_flags_array): $(asm_generic_uapi_dir)/mman.h $(asm_generic_uapi_dir)/mman-common.h $(mmap_flags_tbl) - $(Q)$(SHELL) '$(mmap_flags_tbl)' $(asm_generic_uapi_dir) $(arch_asm_uapi_dir) > $@ +$(mmap_flags_array): $(linux_uapi_dir)/mman.h $(asm_generic_uapi_dir)/mman.h $(asm_generic_uapi_dir)/mman-common.h $(mmap_flags_tbl) + $(Q)$(SHELL) '$(mmap_flags_tbl)' $(linux_uapi_dir) $(asm_generic_uapi_dir) $(arch_asm_uapi_dir) > $@ mount_flags_array := $(beauty_outdir)/mount_flags_array.c mount_flags_tbl := $(srctree)/tools/perf/trace/beauty/mount_flags.sh diff --git a/tools/perf/check-headers.sh b/tools/perf/check-headers.sh index 7b55613924de..c68ee06cae63 100755 --- a/tools/perf/check-headers.sh +++ b/tools/perf/check-headers.sh @@ -103,7 +103,7 @@ done # diff with extra ignore lines check arch/x86/lib/memcpy_64.S '-I "^EXPORT_SYMBOL" -I "^#include "' check arch/x86/lib/memset_64.S '-I "^EXPORT_SYMBOL" -I "^#include "' -check include/uapi/asm-generic/mman.h '-I "^#include <\(uapi/\)*asm-generic/mman-common.h>"' +check include/uapi/asm-generic/mman.h '-I "^#include <\(uapi/\)*asm-generic/mman-common\(-tools\)*.h>"' check include/uapi/linux/mman.h '-I "^#include <\(uapi/\)*asm/mman.h>"' # diff non-symmetric files diff --git a/tools/perf/trace/beauty/mmap_flags.sh b/tools/perf/trace/beauty/mmap_flags.sh index 32bac9c0d694..5f5eefcb3c74 100755 --- a/tools/perf/trace/beauty/mmap_flags.sh +++ b/tools/perf/trace/beauty/mmap_flags.sh @@ -1,15 +1,18 @@ #!/bin/sh # SPDX-License-Identifier: LGPL-2.1 -if [ $# -ne 2 ] ; then +if [ $# -ne 3 ] ; then [ $# -eq 1 ] && hostarch=$1 || hostarch=`uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/` + linux_header_dir=tools/include/uapi/linux header_dir=tools/include/uapi/asm-generic arch_header_dir=tools/arch/${hostarch}/include/uapi/asm else - header_dir=$1 - arch_header_dir=$2 + linux_header_dir=$1 + header_dir=$2 + arch_header_dir=$3 fi +linux_mman=${linux_header_dir}/mman.h arch_mman=${arch_header_dir}/mman.h # those in egrep -vw are flags, we want just the bits @@ -20,6 +23,11 @@ egrep -q $regex ${arch_mman} && \ (egrep $regex ${arch_mman} | \ sed -r "s/$regex/\2 \1/g" | \ xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n") +egrep -q $regex ${linux_mman} && \ +(egrep $regex ${linux_mman} | \ + egrep -vw 'MAP_(UNINITIALIZED|TYPE|SHARED_VALIDATE)' | \ + sed -r "s/$regex/\2 \1/g" | \ + xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n") ([ ! -f ${arch_mman} ] || egrep -q '#[[:space:]]*include[[:space:]]+ Date: Mon, 25 Mar 2019 14:22:47 -0300 Subject: [PATCH 31/39] tools headers uapi: Sync linux/fcntl.h to get the F_SEAL_FUTURE_WRITE addition To get the changes in: ab3948f58ff8 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd") And silence this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fcntl.h' differs from latest version at 'include/uapi/linux/fcntl.h' diff -u tools/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h Cc: Adrian Hunter Cc: Jiri Olsa Cc: Joel Fernandes (Google) Cc: Linus Torvalds Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-lvfx5cgf0xzmdi9mcjva1ttl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/fcntl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/include/uapi/linux/fcntl.h b/tools/include/uapi/linux/fcntl.h index 6448cdd9a350..a2f8658f1c55 100644 --- a/tools/include/uapi/linux/fcntl.h +++ b/tools/include/uapi/linux/fcntl.h @@ -41,6 +41,7 @@ #define F_SEAL_SHRINK 0x0002 /* prevent file from shrinking */ #define F_SEAL_GROW 0x0004 /* prevent file from growing */ #define F_SEAL_WRITE 0x0008 /* prevent writes */ +#define F_SEAL_FUTURE_WRITE 0x0010 /* prevent future writes while mapped */ /* (1U << 31) is reserved for signed error codes */ /* From 949af89af02c2d66db973c5bca01b7858e1ce0ba Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 25 Mar 2019 14:25:33 -0300 Subject: [PATCH 32/39] tools arch x86: Sync asm/cpufeatures.h with the kernel sources To get the changes from: 52f64909409c ("x86: Add TSX Force Abort CPUID/MSR") That don't cause any changes in the generated perf binaries. And silence this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra (Intel) Cc: Thomas Gleixner Link: https://lkml.kernel.org/n/tip-zv8kw8vnb1zppflncpwfsv2w@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/x86/include/asm/cpufeatures.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/arch/x86/include/asm/cpufeatures.h b/tools/arch/x86/include/asm/cpufeatures.h index 6d6122524711..981ff9479648 100644 --- a/tools/arch/x86/include/asm/cpufeatures.h +++ b/tools/arch/x86/include/asm/cpufeatures.h @@ -344,6 +344,7 @@ /* Intel-defined CPU features, CPUID level 0x00000007:0 (EDX), word 18 */ #define X86_FEATURE_AVX512_4VNNIW (18*32+ 2) /* AVX-512 Neural Network Instructions */ #define X86_FEATURE_AVX512_4FMAPS (18*32+ 3) /* AVX-512 Multiply Accumulation Single precision */ +#define X86_FEATURE_TSX_FORCE_ABORT (18*32+13) /* "" TSX_FORCE_ABORT */ #define X86_FEATURE_PCONFIG (18*32+18) /* Intel PCONFIG */ #define X86_FEATURE_SPEC_CTRL (18*32+26) /* "" Speculation Control (IBRS + IBPB) */ #define X86_FEATURE_INTEL_STIBP (18*32+27) /* "" Single Thread Indirect Branch Predictors */ From 82392516e9e0818cd2227cf9a16205c90a6cacfa Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 25 Mar 2019 14:28:20 -0300 Subject: [PATCH 33/39] tools headers uapi: Update drm/i915_drm.h To get the changes in: e46c2e99f600 ("drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only)") That don't cause changes in the generated perf binaries. To silence this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Tvrtko Ursulin Link: https://lkml.kernel.org/n/tip-h6bspm1nomjnpr90333rrx7q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/drm/i915_drm.h | 64 +++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/tools/include/uapi/drm/i915_drm.h b/tools/include/uapi/drm/i915_drm.h index 298b2e197744..397810fa2d33 100644 --- a/tools/include/uapi/drm/i915_drm.h +++ b/tools/include/uapi/drm/i915_drm.h @@ -1486,9 +1486,73 @@ struct drm_i915_gem_context_param { #define I915_CONTEXT_MAX_USER_PRIORITY 1023 /* inclusive */ #define I915_CONTEXT_DEFAULT_PRIORITY 0 #define I915_CONTEXT_MIN_USER_PRIORITY -1023 /* inclusive */ + /* + * When using the following param, value should be a pointer to + * drm_i915_gem_context_param_sseu. + */ +#define I915_CONTEXT_PARAM_SSEU 0x7 __u64 value; }; +/** + * Context SSEU programming + * + * It may be necessary for either functional or performance reason to configure + * a context to run with a reduced number of SSEU (where SSEU stands for Slice/ + * Sub-slice/EU). + * + * This is done by configuring SSEU configuration using the below + * @struct drm_i915_gem_context_param_sseu for every supported engine which + * userspace intends to use. + * + * Not all GPUs or engines support this functionality in which case an error + * code -ENODEV will be returned. + * + * Also, flexibility of possible SSEU configuration permutations varies between + * GPU generations and software imposed limitations. Requesting such a + * combination will return an error code of -EINVAL. + * + * NOTE: When perf/OA is active the context's SSEU configuration is ignored in + * favour of a single global setting. + */ +struct drm_i915_gem_context_param_sseu { + /* + * Engine class & instance to be configured or queried. + */ + __u16 engine_class; + __u16 engine_instance; + + /* + * Unused for now. Must be cleared to zero. + */ + __u32 flags; + + /* + * Mask of slices to enable for the context. Valid values are a subset + * of the bitmask value returned for I915_PARAM_SLICE_MASK. + */ + __u64 slice_mask; + + /* + * Mask of subslices to enable for the context. Valid values are a + * subset of the bitmask value return by I915_PARAM_SUBSLICE_MASK. + */ + __u64 subslice_mask; + + /* + * Minimum/Maximum number of EUs to enable per subslice for the + * context. min_eus_per_subslice must be inferior or equal to + * max_eus_per_subslice. + */ + __u16 min_eus_per_subslice; + __u16 max_eus_per_subslice; + + /* + * Unused for now. Must be cleared to zero. + */ + __u32 rsvd; +}; + enum drm_i915_oa_format { I915_OA_FORMAT_A13 = 1, /* HSW only */ I915_OA_FORMAT_A29, /* HSW only */ From 8142bd82a59e452fefea7b21113101d6a87d9fa8 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 25 Mar 2019 11:34:04 -0300 Subject: [PATCH 34/39] tools headers: Update x86's syscall_64.tbl and uapi/asm-generic/unistd To pick up the changes introduced in the following csets: 2b188cc1bb85 ("Add io_uring IO interface") edafccee56ff ("io_uring: add support for pre-mapped user IO buffers") 3eb39f47934f ("signal: add pidfd_send_signal() syscall") This makes 'perf trace' to become aware of these new syscalls, so that one can use them like 'perf trace -e ui_uring*,*signal' to do a system wide strace-like session looking at those syscalls, for instance. For example: # perf trace -s io_uring-cp ~acme/isos/RHEL-x86_64-dvd1.iso ~/bla Summary of events: io_uring-cp (383), 1208866 events, 100.0% syscall calls total min avg max stddev (msec) (msec) (msec) (msec) (%) -------------- ------ -------- ------ ------- ------- ------ io_uring_enter 605780 2955.615 0.000 0.005 33.804 1.94% openat 4 459.446 0.004 114.861 459.435 100.00% munmap 4 0.073 0.009 0.018 0.042 44.03% mmap 10 0.054 0.002 0.005 0.026 43.24% brk 28 0.038 0.001 0.001 0.003 7.51% io_uring_setup 1 0.030 0.030 0.030 0.030 0.00% mprotect 4 0.014 0.002 0.004 0.005 14.32% close 5 0.012 0.001 0.002 0.004 28.87% fstat 3 0.006 0.001 0.002 0.003 35.83% read 4 0.004 0.001 0.001 0.002 13.58% access 1 0.003 0.003 0.003 0.003 0.00% lseek 3 0.002 0.001 0.001 0.001 9.00% arch_prctl 2 0.002 0.001 0.001 0.001 0.69% execve 1 0.000 0.000 0.000 0.000 0.00% # # perf trace -e io_uring* -s io_uring-cp ~acme/isos/RHEL-x86_64-dvd1.iso ~/bla Summary of events: io_uring-cp (390), 1191250 events, 100.0% syscall calls total min avg max stddev (msec) (msec) (msec) (msec) (%) -------------- ------ -------- ------ ------ ------ ------ io_uring_enter 597093 2706.060 0.001 0.005 14.761 1.10% io_uring_setup 1 0.038 0.038 0.038 0.038 0.00% # More work needed to make the tools/perf/examples/bpf/augmented_raw_syscalls.c BPF program to copy the 'struct io_uring_params' arguments to perf's ring buffer so that 'perf trace' can use the BTF info put in place by pahole's conversion of the kernel DWARF and then auto-beautify those arguments. This patch produces the expected change in the generated syscalls table for x86_64: --- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before 2019-03-26 13:37:46.679057774 -0300 +++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2019-03-26 13:38:12.755990383 -0300 @@ -334,5 +334,9 @@ static const char *syscalltbl_x86_64[] = [332] = "statx", [333] = "io_pgetevents", [334] = "rseq", + [424] = "pidfd_send_signal", + [425] = "io_uring_setup", + [426] = "io_uring_enter", + [427] = "io_uring_register", }; -#define SYSCALLTBL_x86_64_MAX_ID 334 +#define SYSCALLTBL_x86_64_MAX_ID 427 This silences these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h' diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl Cc: Adrian Hunter Cc: Andrii Nakryiko Cc: Christian Brauner Cc: Daniel Borkmann Cc: Jens Axboe Cc: Jiri Olsa Cc: Martin KaFai Lau Cc: Namhyung Kim Cc: Song Liu Cc: Yonghong Song Link: https://lkml.kernel.org/n/tip-p0ars3otuc52x5iznf21shhw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/asm-generic/unistd.h | 11 ++++++++++- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl | 4 ++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/tools/include/uapi/asm-generic/unistd.h b/tools/include/uapi/asm-generic/unistd.h index 12cdf611d217..dee7292e1df6 100644 --- a/tools/include/uapi/asm-generic/unistd.h +++ b/tools/include/uapi/asm-generic/unistd.h @@ -824,8 +824,17 @@ __SYSCALL(__NR_futex_time64, sys_futex) __SYSCALL(__NR_sched_rr_get_interval_time64, sys_sched_rr_get_interval) #endif +#define __NR_pidfd_send_signal 424 +__SYSCALL(__NR_pidfd_send_signal, sys_pidfd_send_signal) +#define __NR_io_uring_setup 425 +__SYSCALL(__NR_io_uring_setup, sys_io_uring_setup) +#define __NR_io_uring_enter 426 +__SYSCALL(__NR_io_uring_enter, sys_io_uring_enter) +#define __NR_io_uring_register 427 +__SYSCALL(__NR_io_uring_register, sys_io_uring_register) + #undef __NR_syscalls -#define __NR_syscalls 424 +#define __NR_syscalls 428 /* * 32 bit systems traditionally used different diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl index 2ae92fddb6d5..92ee0b4378d4 100644 --- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl +++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl @@ -345,6 +345,10 @@ 334 common rseq __x64_sys_rseq # don't use numbers 387 through 423, add new calls after the last # 'common' entry +424 common pidfd_send_signal __x64_sys_pidfd_send_signal +425 common io_uring_setup __x64_sys_io_uring_setup +426 common io_uring_enter __x64_sys_io_uring_enter +427 common io_uring_register __x64_sys_io_uring_register # # x32-specific system call numbers start at 512 to avoid cache impact From 707c373c846cf6e27a47a2c093d243a35c691b62 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 26 Mar 2019 13:45:58 -0300 Subject: [PATCH 35/39] tools headers uapi: Sync powerpc's asm/kvm.h copy with the kernel sources To pick up the changes in: 2b57ecd0208f ("KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()") That don't cause any changes in the tools. This silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h' diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Paul Mackerras Cc: Suraj Jitindar Singh Link: https://lkml.kernel.org/n/tip-4pb7ywp9536hub2pnj4hu6i4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/powerpc/include/uapi/asm/kvm.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/arch/powerpc/include/uapi/asm/kvm.h b/tools/arch/powerpc/include/uapi/asm/kvm.h index 8c876c166ef2..26ca425f4c2c 100644 --- a/tools/arch/powerpc/include/uapi/asm/kvm.h +++ b/tools/arch/powerpc/include/uapi/asm/kvm.h @@ -463,10 +463,12 @@ struct kvm_ppc_cpu_char { #define KVM_PPC_CPU_CHAR_BR_HINT_HONOURED (1ULL << 58) #define KVM_PPC_CPU_CHAR_MTTRIG_THR_RECONF (1ULL << 57) #define KVM_PPC_CPU_CHAR_COUNT_CACHE_DIS (1ULL << 56) +#define KVM_PPC_CPU_CHAR_BCCTR_FLUSH_ASSIST (1ull << 54) #define KVM_PPC_CPU_BEHAV_FAVOUR_SECURITY (1ULL << 63) #define KVM_PPC_CPU_BEHAV_L1D_FLUSH_PR (1ULL << 62) #define KVM_PPC_CPU_BEHAV_BNDS_CHK_SPEC_BAR (1ULL << 61) +#define KVM_PPC_CPU_BEHAV_FLUSH_COUNT_CACHE (1ull << 58) /* Per-vcpu XICS interrupt controller state */ #define KVM_REG_PPC_ICP_STATE (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x8c) From 977c7a6d1e263ff1d755f28595b99e4bc0c48a9f Mon Sep 17 00:00:00 2001 From: Wei Li Date: Thu, 28 Feb 2019 17:20:03 +0800 Subject: [PATCH 36/39] perf machine: Update kernel map address and re-order properly Since commit 1fb87b8e9599 ("perf machine: Don't search for active kernel start in __machine__create_kernel_maps"), the __machine__create_kernel_maps() just create a map what start and end are both zero. Though the address will be updated later, the order of map in the rbtree may be incorrect. The commit ee05d21791db ("perf machine: Set main kernel end address properly") fixed the logic in machine__create_kernel_maps(), but it's still wrong in function machine__process_kernel_mmap_event(). To reproduce this issue, we need an environment which the module address is before the kernel text segment. I tested it on an aarch64 machine with kernel 4.19.25: [root@localhost hulk]# grep _stext /proc/kallsyms ffff000008081000 T _stext [root@localhost hulk]# grep _etext /proc/kallsyms ffff000009780000 R _etext [root@localhost hulk]# tail /proc/modules hisi_sas_v2_hw 77824 0 - Live 0xffff00000191d000 nvme_core 126976 7 nvme, Live 0xffff0000018b6000 mdio 20480 1 ixgbe, Live 0xffff0000018ab000 hisi_sas_main 106496 1 hisi_sas_v2_hw, Live 0xffff000001861000 hns_mdio 20480 2 - Live 0xffff000001822000 hnae 28672 3 hns_dsaf,hns_enet_drv, Live 0xffff000001815000 dm_mirror 40960 0 - Live 0xffff000001804000 dm_region_hash 32768 1 dm_mirror, Live 0xffff0000017f5000 dm_log 32768 2 dm_mirror,dm_region_hash, Live 0xffff0000017e7000 dm_mod 315392 17 dm_mirror,dm_log, Live 0xffff000001780000 [root@localhost hulk]# Before fix: [root@localhost bin]# perf record sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (9 samples) ] [root@localhost bin]# perf buildid-list -i perf.data 4c4e46c971ca935f781e603a09b52a92e8bdfee8 [vdso] [root@localhost bin]# perf buildid-list -i perf.data -H 0000000000000000000000000000000000000000 /proc/kcore [root@localhost bin]# After fix: [root@localhost tools]# ./perf/perf record sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (9 samples) ] [root@localhost tools]# ./perf/perf buildid-list -i perf.data 28a6c690262896dbd1b5e1011ed81623e6db0610 [kernel.kallsyms] 106c14ce6e4acea3453e484dc604d66666f08a2f [vdso] [root@localhost tools]# ./perf/perf buildid-list -i perf.data -H 28a6c690262896dbd1b5e1011ed81623e6db0610 /proc/kcore Signed-off-by: Wei Li Acked-by: Jiri Olsa Acked-by: Namhyung Kim Cc: Alexander Shishkin Cc: David Ahern Cc: Hanjun Guo Cc: Kim Phillips Cc: Li Bin Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20190228092003.34071-1-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/machine.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c index 61959aba7e27..3c520baa198c 100644 --- a/tools/perf/util/machine.c +++ b/tools/perf/util/machine.c @@ -1421,6 +1421,20 @@ static void machine__set_kernel_mmap(struct machine *machine, machine->vmlinux_map->end = ~0ULL; } +static void machine__update_kernel_mmap(struct machine *machine, + u64 start, u64 end) +{ + struct map *map = machine__kernel_map(machine); + + map__get(map); + map_groups__remove(&machine->kmaps, map); + + machine__set_kernel_mmap(machine, start, end); + + map_groups__insert(&machine->kmaps, map); + map__put(map); +} + int machine__create_kernel_maps(struct machine *machine) { struct dso *kernel = machine__get_kernel(machine); @@ -1453,17 +1467,11 @@ int machine__create_kernel_maps(struct machine *machine) goto out_put; } - /* we have a real start address now, so re-order the kmaps */ - map = machine__kernel_map(machine); - - map__get(map); - map_groups__remove(&machine->kmaps, map); - - /* assume it's the last in the kmaps */ - machine__set_kernel_mmap(machine, addr, ~0ULL); - - map_groups__insert(&machine->kmaps, map); - map__put(map); + /* + * we have a real start address now, so re-order the kmaps + * assume it's the last in the kmaps + */ + machine__update_kernel_mmap(machine, addr, ~0ULL); } if (machine__create_extra_kernel_maps(machine, kernel)) @@ -1599,7 +1607,7 @@ static int machine__process_kernel_mmap_event(struct machine *machine, if (strstr(kernel->long_name, "vmlinux")) dso__set_short_name(kernel, "[kernel.vmlinux]", false); - machine__set_kernel_mmap(machine, event->mmap.start, + machine__update_kernel_mmap(machine, event->mmap.start, event->mmap.start + event->mmap.len); /* From 8453c936db20489dbf0957187dca9a2656a2a7b6 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 27 Mar 2019 09:28:25 +0200 Subject: [PATCH 37/39] perf scripts python: exported-sql-viewer.py: Fix never-ending loop pyside version 1 fails to handle python3 large integers in some cases, resulting in Qt getting into a never-ending loop. This affects: samples Table samples_view Table All branches Report Selected branches Report Add workarounds for those cases. Signed-off-by: Adrian Hunter Cc: Jiri Olsa Fixes: beda0e725e5f ("perf script python: Add Python3 support to exported-sql-viewer.py") Link: http://lkml.kernel.org/r/20190327072826.19168-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- .../scripts/python/exported-sql-viewer.py | 60 +++++++++++++++---- 1 file changed, 50 insertions(+), 10 deletions(-) diff --git a/tools/perf/scripts/python/exported-sql-viewer.py b/tools/perf/scripts/python/exported-sql-viewer.py index e38518cdcbc3..0cf30956064a 100755 --- a/tools/perf/scripts/python/exported-sql-viewer.py +++ b/tools/perf/scripts/python/exported-sql-viewer.py @@ -107,6 +107,7 @@ import os from PySide.QtCore import * from PySide.QtGui import * from PySide.QtSql import * +pyside_version_1 = True from decimal import * from ctypes import * from multiprocessing import Process, Array, Value, Event @@ -1526,6 +1527,19 @@ def BranchDataPrep(query): " (" + dsoname(query.value(15)) + ")") return data +def BranchDataPrepWA(query): + data = [] + data.append(query.value(0)) + # Workaround pyside failing to handle large integers (i.e. time) in python3 by converting to a string + data.append("{:>19}".format(query.value(1))) + for i in xrange(2, 8): + data.append(query.value(i)) + data.append(tohex(query.value(8)).rjust(16) + " " + query.value(9) + offstr(query.value(10)) + + " (" + dsoname(query.value(11)) + ")" + " -> " + + tohex(query.value(12)) + " " + query.value(13) + offstr(query.value(14)) + + " (" + dsoname(query.value(15)) + ")") + return data + # Branch data model class BranchModel(TreeModel): @@ -1553,7 +1567,11 @@ class BranchModel(TreeModel): " AND evsel_id = " + str(self.event_id) + " ORDER BY samples.id" " LIMIT " + str(glb_chunk_sz)) - self.fetcher = SQLFetcher(glb, sql, BranchDataPrep, self.AddSample) + if pyside_version_1 and sys.version_info[0] == 3: + prep = BranchDataPrepWA + else: + prep = BranchDataPrep + self.fetcher = SQLFetcher(glb, sql, prep, self.AddSample) self.fetcher.done.connect(self.Update) self.fetcher.Fetch(glb_chunk_sz) @@ -2079,14 +2097,6 @@ def IsSelectable(db, table, sql = ""): return False return True -# SQL data preparation - -def SQLTableDataPrep(query, count): - data = [] - for i in xrange(count): - data.append(query.value(i)) - return data - # SQL table data model item class SQLTableItem(): @@ -2110,7 +2120,7 @@ class SQLTableModel(TableModel): self.more = True self.populated = 0 self.column_headers = column_headers - self.fetcher = SQLFetcher(glb, sql, lambda x, y=len(column_headers): SQLTableDataPrep(x, y), self.AddSample) + self.fetcher = SQLFetcher(glb, sql, lambda x, y=len(column_headers): self.SQLTableDataPrep(x, y), self.AddSample) self.fetcher.done.connect(self.Update) self.fetcher.Fetch(glb_chunk_sz) @@ -2154,6 +2164,12 @@ class SQLTableModel(TableModel): def columnHeader(self, column): return self.column_headers[column] + def SQLTableDataPrep(self, query, count): + data = [] + for i in xrange(count): + data.append(query.value(i)) + return data + # SQL automatic table data model class SQLAutoTableModel(SQLTableModel): @@ -2182,8 +2198,32 @@ class SQLAutoTableModel(SQLTableModel): QueryExec(query, "SELECT column_name FROM information_schema.columns WHERE table_schema = '" + schema + "' and table_name = '" + select_table_name + "'") while query.next(): column_headers.append(query.value(0)) + if pyside_version_1 and sys.version_info[0] == 3: + if table_name == "samples_view": + self.SQLTableDataPrep = self.samples_view_DataPrep + if table_name == "samples": + self.SQLTableDataPrep = self.samples_DataPrep super(SQLAutoTableModel, self).__init__(glb, sql, column_headers, parent) + def samples_view_DataPrep(self, query, count): + data = [] + data.append(query.value(0)) + # Workaround pyside failing to handle large integers (i.e. time) in python3 by converting to a string + data.append("{:>19}".format(query.value(1))) + for i in xrange(2, count): + data.append(query.value(i)) + return data + + def samples_DataPrep(self, query, count): + data = [] + for i in xrange(9): + data.append(query.value(i)) + # Workaround pyside failing to handle large integers (i.e. time) in python3 by converting to a string + data.append("{:>19}".format(query.value(9))) + for i in xrange(10, count): + data.append(query.value(i)) + return data + # Base class for custom ResizeColumnsToContents class ResizeColumnsToContentsBase(QObject): From 606bd60ab6fbcb7f73deeef4fa37cfd5e447a200 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 27 Mar 2019 09:28:26 +0200 Subject: [PATCH 38/39] perf scripts python: exported-sql-viewer.py: Fix python3 support Unlike python2, python3 strings are not compatible with byte strings. That results in disassembly not working for the branches reports. Fixup those places overlooked in the port to python3. Signed-off-by: Adrian Hunter Cc: Jiri Olsa Fixes: beda0e725e5f ("perf script python: Add Python3 support to exported-sql-viewer.py") Link: http://lkml.kernel.org/r/20190327072826.19168-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- .../perf/scripts/python/exported-sql-viewer.py | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/tools/perf/scripts/python/exported-sql-viewer.py b/tools/perf/scripts/python/exported-sql-viewer.py index 0cf30956064a..74ef92f1d19a 100755 --- a/tools/perf/scripts/python/exported-sql-viewer.py +++ b/tools/perf/scripts/python/exported-sql-viewer.py @@ -2908,9 +2908,13 @@ class LibXED(): ok = self.xed_format_context(2, inst.xedp, inst.bufferp, sizeof(inst.buffer), ip, 0, 0) if not ok: return 0, "" + if sys.version_info[0] == 2: + result = inst.buffer.value + else: + result = inst.buffer.value.decode() # Return instruction length and the disassembled instruction text # For now, assume the length is in byte 166 - return inst.xedd[166], inst.buffer.value + return inst.xedd[166], result def TryOpen(file_name): try: @@ -2926,9 +2930,14 @@ def Is64Bit(f): header = f.read(7) f.seek(pos) magic = header[0:4] - eclass = ord(header[4]) - encoding = ord(header[5]) - version = ord(header[6]) + if sys.version_info[0] == 2: + eclass = ord(header[4]) + encoding = ord(header[5]) + version = ord(header[6]) + else: + eclass = header[4] + encoding = header[5] + version = header[6] if magic == chr(127) + "ELF" and eclass > 0 and eclass < 3 and encoding > 0 and encoding < 3 and version == 1: result = True if eclass == 2 else False return result From e94d6b7f615e6dfbaf9fba7db6011db561461d0c Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Fri, 15 Mar 2019 11:00:14 -0700 Subject: [PATCH 39/39] perf pmu: Fix parser error for uncore event alias Perf fails to parse uncore event alias, for example: # perf stat -e unc_m_clockticks -a --no-merge sleep 1 event syntax error: 'unc_m_clockticks' \___ parser error Current code assumes that the event alias is from one specific PMU. To find the PMU, perf strcmps the PMU name of event alias with the real PMU name on the system. However, the uncore event alias may be from multiple PMUs with common prefix. The PMU name of uncore event alias is the common prefix. For example, UNC_M_CLOCKTICKS is clock event for iMC, which include 6 PMUs with the same prefix "uncore_imc" on a skylake server. The real PMU names on the system for iMC are uncore_imc_0 ... uncore_imc_5. The strncmp is used to only check the common prefix for uncore event alias. With the patch: # perf stat -e unc_m_clockticks -a --no-merge sleep 1 Performance counter stats for 'system wide': 723,594,722 unc_m_clockticks [uncore_imc_5] 724,001,954 unc_m_clockticks [uncore_imc_3] 724,042,655 unc_m_clockticks [uncore_imc_1] 724,161,001 unc_m_clockticks [uncore_imc_4] 724,293,713 unc_m_clockticks [uncore_imc_2] 724,340,901 unc_m_clockticks [uncore_imc_0] 1.002090060 seconds time elapsed Signed-off-by: Kan Liang Acked-by: Jiri Olsa Cc: Andi Kleen Cc: Thomas Richter Cc: stable@vger.kernel.org Fixes: ea1fa48c055f ("perf stat: Handle different PMU names with common prefix") Link: http://lkml.kernel.org/r/1552672814-156173-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/pmu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index 6199a3174ab9..e0429f4ef335 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -732,10 +732,20 @@ static void pmu_add_cpu_aliases(struct list_head *head, struct perf_pmu *pmu) if (!is_arm_pmu_core(name)) { pname = pe->pmu ? pe->pmu : "cpu"; + + /* + * uncore alias may be from different PMU + * with common prefix + */ + if (pmu_is_uncore(name) && + !strncmp(pname, name, strlen(pname))) + goto new_alias; + if (strcmp(pname, name)) continue; } +new_alias: /* need type casts to override 'const' */ __perf_pmu__new_alias(head, NULL, (char *)pe->name, (char *)pe->desc, (char *)pe->event,